Documentation/scsi/scsi-parameters.txt

   1                           SCSI Kernel Parameters
   2                           ~~~~~~~~~~~~~~~~~~~~~~
   3
   4 See Documentation/kernel-parameters.txt for general information on
   5 specifying module parameters.
   6
   7 This document may not be entirely up to date and comprehensive. The command
   8 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
   9 module. Loadable modules, after being loaded into the running kernel, also
  10 reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
  11 parameters may be changed at runtime by the command
  12 "echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
  13
  14
  15         advansys=       [HW,SCSI]
  16                         See header of drivers/scsi/advansys.c.
  17
  18         aha152x=        [HW,SCSI]
  19                         See Documentation/scsi/aha152x.txt.
  20
  21         aha1542=        [HW,SCSI]
  22                         Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
  23
  24         aic7xxx=        [HW,SCSI]
  25                         See Documentation/scsi/aic7xxx.txt.
  26
  27         aic79xx=        [HW,SCSI]
  28                         See Documentation/scsi/aic79xx.txt.
  29
  30         atascsi=        [HW,SCSI]
  31                         See drivers/scsi/atari_scsi.c.
  32
  33         BusLogic=       [HW,SCSI]
  34                         See drivers/scsi/BusLogic.c, comment before function
  35                         BusLogic_ParseDriverOptions().
  36
  37         dtc3181e=       [HW,SCSI]
  38                         See Documentation/scsi/g_NCR5380.txt.
  39
  40         eata=           [HW,SCSI]
  41
  42         fdomain=        [HW,SCSI]
  43                         See header of drivers/scsi/fdomain.c.
  44
  45         gdth=           [HW,SCSI]
  46                         See header of drivers/scsi/gdth.c.
  47
  48         gvp11=          [HW,SCSI]
  49
  50         in2000=         [HW,SCSI]
  51                         See header of drivers/scsi/in2000.c.
  52
  53         ips=            [HW,SCSI] Adaptec / IBM ServeRAID controller
  54                         See header of drivers/scsi/ips.c.
  55
  56         mac5380=        [HW,SCSI]
  57                         See drivers/scsi/mac_scsi.c.
  58
  59         max_luns=       [SCSI] Maximum number of LUNs to probe.
  60                         Should be between 1 and 2^32-1.
  61
  62         max_report_luns=
  63                         [SCSI] Maximum number of LUNs received.
  64                         Should be between 1 and 16384.
  65
  66         NCR_D700=       [HW,SCSI]
  67                         See header of drivers/scsi/NCR_D700.c.
  68
  69         ncr5380=        [HW,SCSI]
  70                         See Documentation/scsi/g_NCR5380.txt.
  71
  72         ncr53c400=      [HW,SCSI]
  73                         See Documentation/scsi/g_NCR5380.txt.
  74
  75         ncr53c400a=     [HW,SCSI]
  76                         See Documentation/scsi/g_NCR5380.txt.
  77
  78         ncr53c406a=     [HW,SCSI]
  79
  80         ncr53c8xx=      [HW,SCSI]
  81
  82         osst=           [HW,SCSI] SCSI Tape Driver
  83                         Format: <buffer_size>,<write_threshold>
  84                         See also Documentation/scsi/st.txt.
  85
  86         pas16=          [HW,SCSI]
  87                         See header of drivers/scsi/pas16.c.
  88
  89         scsi_debug_*=   [SCSI]
  90                         See drivers/scsi/scsi_debug.c.
  91
  92         scsi_default_dev_flags=
  93                         [SCSI] SCSI default device flags
  94                         Format: <integer>
  95
  96         scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
  97                         Format: <vendor>:<model>:<flags>
  98                         (flags are integer value)
  99
 100         scsi_logging_level=     [SCSI] a bit mask of logging levels
 101                         See drivers/scsi/scsi_logging.h for bits.  Also
 102                         settable via sysctl at dev.scsi.logging_level
 103                         (/proc/sys/dev/scsi/logging_level).
 104                         There is also a nice 'scsi_logging_level' script in the
 105                         S390-tools package, available for download at
 106                         http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
 107
 108         scsi_mod.scan=  [SCSI] sync (default) scans SCSI busses as they are
 109                         discovered.  async scans them in kernel threads,
 110                         allowing boot to proceed.  none ignores them, expecting
 111                         user space to do the scan.
 112
 113         sim710=         [SCSI,HW]
 114                         See header of drivers/scsi/sim710.c.
 115
 116         st=             [HW,SCSI] SCSI tape parameters (buffers, etc.)
 117                         See Documentation/scsi/st.txt.
 118
 119         sym53c416=      [HW,SCSI]
 120                         See header of drivers/scsi/sym53c416.c.
 121
 122         t128=           [HW,SCSI]
 123                         See header of drivers/scsi/t128.c.
 124
 125         tmscsim=        [HW,SCSI]
 126                         See comment before function dc390_setup() in
 127                         drivers/scsi/tmscsim.c.
 128
 129         u14-34f=        [HW,SCSI] UltraStor 14F/34F SCSI host adapter
 130                         See header of drivers/scsi/u14-34f.c.
 131
 132         wd33c93=        [HW,SCSI]
 133                         See header of drivers/scsi/wd33c93.c.
 134
 135         wd7000=         [HW,SCSI]
 136                         See header of drivers/scsi/wd7000.c.