arch/arm/boot/dts/am33xx.dtsi

   1 /*
   2  * Device Tree Source for AM33XX SoC
   3  *
   4  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * This file is licensed under the terms of the GNU General Public License
   7  * version 2.  This program is licensed "as is" without any warranty of any
   8  * kind, whether express or implied.
   9  */
  10
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/pinctrl/am33xx.h>
  13
  14 #include "skeleton.dtsi"
  15
  16 / {
  17         compatible = "ti,am33xx";
  18         interrupt-parent = <&intc>;
  19
  20         aliases {
  21                 i2c0 = &i2c0;
  22                 i2c1 = &i2c1;
  23                 i2c2 = &i2c2;
  24                 serial0 = &uart0;
  25                 serial1 = &uart1;
  26                 serial2 = &uart2;
  27                 serial3 = &uart3;
  28                 serial4 = &uart4;
  29                 serial5 = &uart5;
  30                 d_can0 = &dcan0;
  31                 d_can1 = &dcan1;
  32                 usb0 = &usb0;
  33                 usb1 = &usb1;
  34                 phy0 = &usb0_phy;
  35                 phy1 = &usb1_phy;
  36                 ethernet0 = &cpsw_emac0;
  37                 ethernet1 = &cpsw_emac1;
  38         };
  39
  40         cpus {
  41                 #address-cells = <1>;
  42                 #size-cells = <0>;
  43                 cpu@0 {
  44                         compatible = "arm,cortex-a8";
  45                         device_type = "cpu";
  46                         reg = <0>;
  47
  48                         operating-points-v2 = <&cpu0_opp_table>;
  49                         ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>;
  50                         ti,syscon-rev = <&scm_conf 0x600>;
  51
  52                         clocks = <&dpll_mpu_ck>;
  53                         clock-names = "cpu";
  54
  55                         clock-latency = <300000>; /* From omap-cpufreq driver */
  56                 };
  57         };
  58
  59         cpu0_opp_table: opp_table0 {
  60                 compatible = "operating-points-v2";
  61
  62                 /*
  63                  * The three following nodes are marked with opp-suspend
  64                  * because the can not be enabled simultaneously on a
  65                  * single SoC.
  66                  */
  67                 opp50@300000000 {
  68                         opp-hz = /bits/ 64 <300000000>;
  69                         opp-microvolt = <950000 931000 969000>;
  70                         opp-supported-hw = <0x06 0x0010>;
  71                         opp-suspend;
  72                 };
  73
  74                 opp100@275000000 {
  75                         opp-hz = /bits/ 64 <275000000>;
  76                         opp-microvolt = <1100000 1078000 1122000>;
  77                         opp-supported-hw = <0x01 0x00FF>;
  78                         opp-suspend;
  79                 };
  80
  81                 opp100@300000000 {
  82                         opp-hz = /bits/ 64 <300000000>;
  83                         opp-microvolt = <1100000 1078000 1122000>;
  84                         opp-supported-hw = <0x06 0x0020>;
  85                         opp-suspend;
  86                 };
  87
  88                 opp100@500000000 {
  89                         opp-hz = /bits/ 64 <500000000>;
  90                         opp-microvolt = <1100000 1078000 1122000>;
  91                         opp-supported-hw = <0x01 0xFFFF>;
  92                 };
  93
  94                 opp100@600000000 {
  95                         opp-hz = /bits/ 64 <600000000>;
  96                         opp-microvolt = <1100000 1078000 1122000>;
  97                         opp-supported-hw = <0x06 0x0040>;
  98                 };
  99
 100                 opp120@600000000 {
 101                         opp-hz = /bits/ 64 <600000000>;
 102                         opp-microvolt = <1200000 1176000 1224000>;
 103                         opp-supported-hw = <0x01 0xFFFF>;
 104                 };
 105
 106                 opp120@720000000 {
 107                         opp-hz = /bits/ 64 <720000000>;
 108                         opp-microvolt = <1200000 1176000 1224000>;
 109                         opp-supported-hw = <0x06 0x0080>;
 110                 };
 111
 112                 oppturbo@720000000 {
 113                         opp-hz = /bits/ 64 <720000000>;
 114                         opp-microvolt = <1260000 1234800 1285200>;
 115                         opp-supported-hw = <0x01 0xFFFF>;
 116                 };
 117
 118                 oppturbo@800000000 {
 119                         opp-hz = /bits/ 64 <800000000>;
 120                         opp-microvolt = <1260000 1234800 1285200>;
 121                         opp-supported-hw = <0x06 0x0100>;
 122                 };
 123
 124                 oppnitro@1000000000 {
 125                         opp-hz = /bits/ 64 <1000000000>;
 126                         opp-microvolt = <1325000 1298500 1351500>;
 127                         opp-supported-hw = <0x04 0x0200>;
 128                 };
 129         };
 130
 131         pmu {
 132                 compatible = "arm,cortex-a8-pmu";
 133                 interrupts = <3>;
 134         };
 135
 136         /*
 137          * The soc node represents the soc top level view. It is used for IPs
 138          * that are not memory mapped in the MPU view or for the MPU itself.
 139          */
 140         soc {
 141                 compatible = "ti,omap-infra";
 142                 mpu {
 143                         compatible = "ti,omap3-mpu";
 144                         ti,hwmods = "mpu";
 145                 };
 146         };
 147
 148         /*
 149          * XXX: Use a flat representation of the AM33XX interconnect.
 150          * The real AM33XX interconnect network is quite complex. Since
 151          * it will not bring real advantage to represent that in DT
 152          * for the moment, just use a fake OCP bus entry to represent
 153          * the whole bus hierarchy.
 154          */
 155         ocp {
 156                 compatible = "simple-bus";
 157                 #address-cells = <1>;
 158                 #size-cells = <1>;
 159                 ranges;
 160                 ti,hwmods = "l3_main";
 161
 162                 l4_wkup: l4_wkup@44c00000 {
 163                         compatible = "ti,am3-l4-wkup", "simple-bus";
 164                         #address-cells = <1>;
 165                         #size-cells = <1>;
 166                         ranges = <0 0x44c00000 0x280000>;
 167
 168                         wkup_m3: wkup_m3@100000 {
 169                                 compatible = "ti,am3352-wkup-m3";
 170                                 reg = <0x100000 0x4000>,
 171                                       <0x180000 0x2000>;
 172                                 reg-names = "umem", "dmem";
 173                                 ti,hwmods = "wkup_m3";
 174                                 ti,pm-firmware = "am335x-pm-firmware.elf";
 175                         };
 176
 177                         prcm: prcm@200000 {
 178                                 compatible = "ti,am3-prcm";
 179                                 reg = <0x200000 0x4000>;
 180
 181                                 prcm_clocks: clocks {
 182                                         #address-cells = <1>;
 183                                         #size-cells = <0>;
 184                                 };
 185
 186                                 prcm_clockdomains: clockdomains {
 187                                 };
 188                         };
 189
 190                         scm: scm@210000 {
 191                                 compatible = "ti,am3-scm", "simple-bus";
 192                                 reg = <0x210000 0x2000>;
 193                                 #address-cells = <1>;
 194                                 #size-cells = <1>;
 195                                 ranges = <0 0x210000 0x2000>;
 196
 197                                 am33xx_pinmux: pinmux@800 {
 198                                         compatible = "pinctrl-single";
 199                                         reg = <0x800 0x238>;
 200                                         #address-cells = <1>;
 201                                         #size-cells = <0>;
 202                                         pinctrl-single,register-width = <32>;
 203                                         pinctrl-single,function-mask = <0x7f>;
 204                                 };
 205
 206                                 scm_conf: scm_conf@0 {
 207                                         compatible = "syscon";
 208                                         reg = <0x0 0x800>;
 209                                         #address-cells = <1>;
 210                                         #size-cells = <1>;
 211
 212                                         scm_clocks: clocks {
 213                                                 #address-cells = <1>;
 214                                                 #size-cells = <0>;
 215                                         };
 216                                 };
 217
 218                                 wkup_m3_ipc: wkup_m3_ipc@1324 {
 219                                         compatible = "ti,am3352-wkup-m3-ipc";
 220                                         reg = <0x1324 0x24>;
 221                                         interrupts = <78>;
 222                                         ti,rproc = <&wkup_m3>;
 223                                         mboxes = <&mailbox &mbox_wkupm3>;
 224                                 };
 225
 226                                 edma_xbar: dma-router@f90 {
 227                                         compatible = "ti,am335x-edma-crossbar";
 228                                         reg = <0xf90 0x40>;
 229                                         #dma-cells = <3>;
 230                                         dma-requests = <32>;
 231                                         dma-masters = <&edma>;
 232                                 };
 233
 234                                 scm_clockdomains: clockdomains {
 235                                 };
 236                         };
 237                 };
 238
 239                 intc: interrupt-controller@48200000 {
 240                         compatible = "ti,am33xx-intc";
 241                         interrupt-controller;
 242                         #interrupt-cells = <1>;
 243                         reg = <0x48200000 0x1000>;
 244                 };
 245
 246                 edma: edma@49000000 {
 247                         compatible = "ti,edma3-tpcc";
 248                         ti,hwmods = "tpcc";
 249                         reg =   <0x49000000 0x10000>;
 250                         reg-names = "edma3_cc";
 251                         interrupts = <12 13 14>;
 252                         interrupt-names = "edma3_ccint", "edma3_mperr",
 253                                           "edma3_ccerrint";
 254                         dma-requests = <64>;
 255                         #dma-cells = <2>;
 256
 257                         ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 258                                    <&edma_tptc2 0>;
 259
 260                         ti,edma-memcpy-channels = <20 21>;
 261                 };
 262
 263                 edma_tptc0: tptc@49800000 {
 264                         compatible = "ti,edma3-tptc";
 265                         ti,hwmods = "tptc0";
 266                         reg =   <0x49800000 0x100000>;
 267                         interrupts = <112>;
 268                         interrupt-names = "edma3_tcerrint";
 269                 };
 270
 271                 edma_tptc1: tptc@49900000 {
 272                         compatible = "ti,edma3-tptc";
 273                         ti,hwmods = "tptc1";
 274                         reg =   <0x49900000 0x100000>;
 275                         interrupts = <113>;
 276                         interrupt-names = "edma3_tcerrint";
 277                 };
 278
 279                 edma_tptc2: tptc@49a00000 {
 280                         compatible = "ti,edma3-tptc";
 281                         ti,hwmods = "tptc2";
 282                         reg =   <0x49a00000 0x100000>;
 283                         interrupts = <114>;
 284                         interrupt-names = "edma3_tcerrint";
 285                 };
 286
 287                 gpio0: gpio@44e07000 {
 288                         compatible = "ti,omap4-gpio";
 289                         ti,hwmods = "gpio1";
 290                         gpio-controller;
 291                         #gpio-cells = <2>;
 292                         interrupt-controller;
 293                         #interrupt-cells = <2>;
 294                         reg = <0x44e07000 0x1000>;
 295                         interrupts = <96>;
 296                 };
 297
 298                 gpio1: gpio@4804c000 {
 299                         compatible = "ti,omap4-gpio";
 300                         ti,hwmods = "gpio2";
 301                         gpio-controller;
 302                         #gpio-cells = <2>;
 303                         interrupt-controller;
 304                         #interrupt-cells = <2>;
 305                         reg = <0x4804c000 0x1000>;
 306                         interrupts = <98>;
 307                 };
 308
 309                 gpio2: gpio@481ac000 {
 310                         compatible = "ti,omap4-gpio";
 311                         ti,hwmods = "gpio3";
 312                         gpio-controller;
 313                         #gpio-cells = <2>;
 314                         interrupt-controller;
 315                         #interrupt-cells = <2>;
 316                         reg = <0x481ac000 0x1000>;
 317                         interrupts = <32>;
 318                 };
 319
 320                 gpio3: gpio@481ae000 {
 321                         compatible = "ti,omap4-gpio";
 322                         ti,hwmods = "gpio4";
 323                         gpio-controller;
 324                         #gpio-cells = <2>;
 325                         interrupt-controller;
 326                         #interrupt-cells = <2>;
 327                         reg = <0x481ae000 0x1000>;
 328                         interrupts = <62>;
 329                 };
 330
 331                 uart0: serial@44e09000 {
 332                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 333                         ti,hwmods = "uart1";
 334                         clock-frequency = <48000000>;
 335                         reg = <0x44e09000 0x2000>;
 336                         interrupts = <72>;
 337                         status = "disabled";
 338                         dmas = <&edma 26 0>, <&edma 27 0>;
 339                         dma-names = "tx", "rx";
 340                 };
 341
 342                 uart1: serial@48022000 {
 343                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 344                         ti,hwmods = "uart2";
 345                         clock-frequency = <48000000>;
 346                         reg = <0x48022000 0x2000>;
 347                         interrupts = <73>;
 348                         status = "disabled";
 349                         dmas = <&edma 28 0>, <&edma 29 0>;
 350                         dma-names = "tx", "rx";
 351                 };
 352
 353                 uart2: serial@48024000 {
 354                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 355                         ti,hwmods = "uart3";
 356                         clock-frequency = <48000000>;
 357                         reg = <0x48024000 0x2000>;
 358                         interrupts = <74>;
 359                         status = "disabled";
 360                         dmas = <&edma 30 0>, <&edma 31 0>;
 361                         dma-names = "tx", "rx";
 362                 };
 363
 364                 uart3: serial@481a6000 {
 365                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 366                         ti,hwmods = "uart4";
 367                         clock-frequency = <48000000>;
 368                         reg = <0x481a6000 0x2000>;
 369                         interrupts = <44>;
 370                         status = "disabled";
 371                 };
 372
 373                 uart4: serial@481a8000 {
 374                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 375                         ti,hwmods = "uart5";
 376                         clock-frequency = <48000000>;
 377                         reg = <0x481a8000 0x2000>;
 378                         interrupts = <45>;
 379                         status = "disabled";
 380                 };
 381
 382                 uart5: serial@481aa000 {
 383                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 384                         ti,hwmods = "uart6";
 385                         clock-frequency = <48000000>;
 386                         reg = <0x481aa000 0x2000>;
 387                         interrupts = <46>;
 388                         status = "disabled";
 389                 };
 390
 391                 i2c0: i2c@44e0b000 {
 392                         compatible = "ti,omap4-i2c";
 393                         #address-cells = <1>;
 394                         #size-cells = <0>;
 395                         ti,hwmods = "i2c1";
 396                         reg = <0x44e0b000 0x1000>;
 397                         interrupts = <70>;
 398                         status = "disabled";
 399                 };
 400
 401                 i2c1: i2c@4802a000 {
 402                         compatible = "ti,omap4-i2c";
 403                         #address-cells = <1>;
 404                         #size-cells = <0>;
 405                         ti,hwmods = "i2c2";
 406                         reg = <0x4802a000 0x1000>;
 407                         interrupts = <71>;
 408                         status = "disabled";
 409                 };
 410
 411                 i2c2: i2c@4819c000 {
 412                         compatible = "ti,omap4-i2c";
 413                         #address-cells = <1>;
 414                         #size-cells = <0>;
 415                         ti,hwmods = "i2c3";
 416                         reg = <0x4819c000 0x1000>;
 417                         interrupts = <30>;
 418                         status = "disabled";
 419                 };
 420
 421                 mmc1: mmc@48060000 {
 422                         compatible = "ti,omap4-hsmmc";
 423                         ti,hwmods = "mmc1";
 424                         ti,dual-volt;
 425                         ti,needs-special-reset;
 426                         ti,needs-special-hs-handling;
 427                         dmas = <&edma_xbar 24 0 0
 428                                 &edma_xbar 25 0 0>;
 429                         dma-names = "tx", "rx";
 430                         interrupts = <64>;
 431                         interrupt-parent = <&intc>;
 432                         reg = <0x48060000 0x1000>;
 433                         status = "disabled";
 434                 };
 435
 436                 mmc2: mmc@481d8000 {
 437                         compatible = "ti,omap4-hsmmc";
 438                         ti,hwmods = "mmc2";
 439                         ti,needs-special-reset;
 440                         dmas = <&edma 2 0
 441                                 &edma 3 0>;
 442                         dma-names = "tx", "rx";
 443                         interrupts = <28>;
 444                         interrupt-parent = <&intc>;
 445                         reg = <0x481d8000 0x1000>;
 446                         status = "disabled";
 447                 };
 448
 449                 mmc3: mmc@47810000 {
 450                         compatible = "ti,omap4-hsmmc";
 451                         ti,hwmods = "mmc3";
 452                         ti,needs-special-reset;
 453                         interrupts = <29>;
 454                         interrupt-parent = <&intc>;
 455                         reg = <0x47810000 0x1000>;
 456                         status = "disabled";
 457                 };
 458
 459                 hwspinlock: spinlock@480ca000 {
 460                         compatible = "ti,omap4-hwspinlock";
 461                         reg = <0x480ca000 0x1000>;
 462                         ti,hwmods = "spinlock";
 463                         #hwlock-cells = <1>;
 464                 };
 465
 466                 wdt2: wdt@44e35000 {
 467                         compatible = "ti,omap3-wdt";
 468                         ti,hwmods = "wd_timer2";
 469                         reg = <0x44e35000 0x1000>;
 470                         interrupts = <91>;
 471                 };
 472
 473                 dcan0: can@481cc000 {
 474                         compatible = "ti,am3352-d_can";
 475                         ti,hwmods = "d_can0";
 476                         reg = <0x481cc000 0x2000>;
 477                         clocks = <&dcan0_fck>;
 478                         clock-names = "fck";
 479                         syscon-raminit = <&scm_conf 0x644 0>;
 480                         interrupts = <52>;
 481                         status = "disabled";
 482                 };
 483
 484                 dcan1: can@481d0000 {
 485                         compatible = "ti,am3352-d_can";
 486                         ti,hwmods = "d_can1";
 487                         reg = <0x481d0000 0x2000>;
 488                         clocks = <&dcan1_fck>;
 489                         clock-names = "fck";
 490                         syscon-raminit = <&scm_conf 0x644 1>;
 491                         interrupts = <55>;
 492                         status = "disabled";
 493                 };
 494
 495                 mailbox: mailbox@480C8000 {
 496                         compatible = "ti,omap4-mailbox";
 497                         reg = <0x480C8000 0x200>;
 498                         interrupts = <77>;
 499                         ti,hwmods = "mailbox";
 500                         #mbox-cells = <1>;
 501                         ti,mbox-num-users = <4>;
 502                         ti,mbox-num-fifos = <8>;
 503                         mbox_wkupm3: wkup_m3 {
 504                                 ti,mbox-send-noirq;
 505                                 ti,mbox-tx = <0 0 0>;
 506                                 ti,mbox-rx = <0 0 3>;
 507                         };
 508                 };
 509
 510                 timer1: timer@44e31000 {
 511                         compatible = "ti,am335x-timer-1ms";
 512                         reg = <0x44e31000 0x400>;
 513                         interrupts = <67>;
 514                         ti,hwmods = "timer1";
 515                         ti,timer-alwon;
 516                 };
 517
 518                 timer2: timer@48040000 {
 519                         compatible = "ti,am335x-timer";
 520                         reg = <0x48040000 0x400>;
 521                         interrupts = <68>;
 522                         ti,hwmods = "timer2";
 523                 };
 524
 525                 timer3: timer@48042000 {
 526                         compatible = "ti,am335x-timer";
 527                         reg = <0x48042000 0x400>;
 528                         interrupts = <69>;
 529                         ti,hwmods = "timer3";
 530                 };
 531
 532                 timer4: timer@48044000 {
 533                         compatible = "ti,am335x-timer";
 534                         reg = <0x48044000 0x400>;
 535                         interrupts = <92>;
 536                         ti,hwmods = "timer4";
 537                         ti,timer-pwm;
 538                 };
 539
 540                 timer5: timer@48046000 {
 541                         compatible = "ti,am335x-timer";
 542                         reg = <0x48046000 0x400>;
 543                         interrupts = <93>;
 544                         ti,hwmods = "timer5";
 545                         ti,timer-pwm;
 546                 };
 547
 548                 timer6: timer@48048000 {
 549                         compatible = "ti,am335x-timer";
 550                         reg = <0x48048000 0x400>;
 551                         interrupts = <94>;
 552                         ti,hwmods = "timer6";
 553                         ti,timer-pwm;
 554                 };
 555
 556                 timer7: timer@4804a000 {
 557                         compatible = "ti,am335x-timer";
 558                         reg = <0x4804a000 0x400>;
 559                         interrupts = <95>;
 560                         ti,hwmods = "timer7";
 561                         ti,timer-pwm;
 562                 };
 563
 564                 rtc: rtc@44e3e000 {
 565                         compatible = "ti,am3352-rtc", "ti,da830-rtc";
 566                         reg = <0x44e3e000 0x1000>;
 567                         interrupts = <75
 568                                       76>;
 569                         ti,hwmods = "rtc";
 570                 };
 571
 572                 spi0: spi@48030000 {
 573                         compatible = "ti,omap4-mcspi";
 574                         #address-cells = <1>;
 575                         #size-cells = <0>;
 576                         reg = <0x48030000 0x400>;
 577                         interrupts = <65>;
 578                         ti,spi-num-cs = <2>;
 579                         ti,hwmods = "spi0";
 580                         dmas = <&edma 16 0
 581                                 &edma 17 0
 582                                 &edma 18 0
 583                                 &edma 19 0>;
 584                         dma-names = "tx0", "rx0", "tx1", "rx1";
 585                         status = "disabled";
 586                 };
 587
 588                 spi1: spi@481a0000 {
 589                         compatible = "ti,omap4-mcspi";
 590                         #address-cells = <1>;
 591                         #size-cells = <0>;
 592                         reg = <0x481a0000 0x400>;
 593                         interrupts = <125>;
 594                         ti,spi-num-cs = <2>;
 595                         ti,hwmods = "spi1";
 596                         dmas = <&edma 42 0
 597                                 &edma 43 0
 598                                 &edma 44 0
 599                                 &edma 45 0>;
 600                         dma-names = "tx0", "rx0", "tx1", "rx1";
 601                         status = "disabled";
 602                 };
 603
 604                 usb: usb@47400000 {
 605                         compatible = "ti,am33xx-usb";
 606                         reg = <0x47400000 0x1000>;
 607                         ranges;
 608                         #address-cells = <1>;
 609                         #size-cells = <1>;
 610                         ti,hwmods = "usb_otg_hs";
 611                         status = "disabled";
 612
 613                         usb_ctrl_mod: control@44e10620 {
 614                                 compatible = "ti,am335x-usb-ctrl-module";
 615                                 reg = <0x44e10620 0x10
 616                                         0x44e10648 0x4>;
 617                                 reg-names = "phy_ctrl", "wakeup";
 618                                 status = "disabled";
 619                         };
 620
 621                         usb0_phy: usb-phy@47401300 {
 622                                 compatible = "ti,am335x-usb-phy";
 623                                 reg = <0x47401300 0x100>;
 624                                 reg-names = "phy";
 625                                 status = "disabled";
 626                                 ti,ctrl_mod = <&usb_ctrl_mod>;
 627                         };
 628
 629                         usb0: usb@47401000 {
 630                                 compatible = "ti,musb-am33xx";
 631                                 status = "disabled";
 632                                 reg = <0x47401400 0x400
 633                                         0x47401000 0x200>;
 634                                 reg-names = "mc", "control";
 635
 636                                 interrupts = <18>;
 637                                 interrupt-names = "mc";
 638                                 dr_mode = "otg";
 639                                 mentor,multipoint = <1>;
 640                                 mentor,num-eps = <16>;
 641                                 mentor,ram-bits = <12>;
 642                                 mentor,power = <500>;
 643                                 phys = <&usb0_phy>;
 644
 645                                 dmas = <&cppi41dma  0 0 &cppi41dma  1 0
 646                                         &cppi41dma  2 0 &cppi41dma  3 0
 647                                         &cppi41dma  4 0 &cppi41dma  5 0
 648                                         &cppi41dma  6 0 &cppi41dma  7 0
 649                                         &cppi41dma  8 0 &cppi41dma  9 0
 650                                         &cppi41dma 10 0 &cppi41dma 11 0
 651                                         &cppi41dma 12 0 &cppi41dma 13 0
 652                                         &cppi41dma 14 0 &cppi41dma  0 1
 653                                         &cppi41dma  1 1 &cppi41dma  2 1
 654                                         &cppi41dma  3 1 &cppi41dma  4 1
 655                                         &cppi41dma  5 1 &cppi41dma  6 1
 656                                         &cppi41dma  7 1 &cppi41dma  8 1
 657                                         &cppi41dma  9 1 &cppi41dma 10 1
 658                                         &cppi41dma 11 1 &cppi41dma 12 1
 659                                         &cppi41dma 13 1 &cppi41dma 14 1>;
 660                                 dma-names =
 661                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 662                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 663                                         "rx14", "rx15",
 664                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 665                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 666                                         "tx14", "tx15";
 667                         };
 668
 669                         usb1_phy: usb-phy@47401b00 {
 670                                 compatible = "ti,am335x-usb-phy";
 671                                 reg = <0x47401b00 0x100>;
 672                                 reg-names = "phy";
 673                                 status = "disabled";
 674                                 ti,ctrl_mod = <&usb_ctrl_mod>;
 675                         };
 676
 677                         usb1: usb@47401800 {
 678                                 compatible = "ti,musb-am33xx";
 679                                 status = "disabled";
 680                                 reg = <0x47401c00 0x400
 681                                         0x47401800 0x200>;
 682                                 reg-names = "mc", "control";
 683                                 interrupts = <19>;
 684                                 interrupt-names = "mc";
 685                                 dr_mode = "otg";
 686                                 mentor,multipoint = <1>;
 687                                 mentor,num-eps = <16>;
 688                                 mentor,ram-bits = <12>;
 689                                 mentor,power = <500>;
 690                                 phys = <&usb1_phy>;
 691
 692                                 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
 693                                         &cppi41dma 17 0 &cppi41dma 18 0
 694                                         &cppi41dma 19 0 &cppi41dma 20 0
 695                                         &cppi41dma 21 0 &cppi41dma 22 0
 696                                         &cppi41dma 23 0 &cppi41dma 24 0
 697                                         &cppi41dma 25 0 &cppi41dma 26 0
 698                                         &cppi41dma 27 0 &cppi41dma 28 0
 699                                         &cppi41dma 29 0 &cppi41dma 15 1
 700                                         &cppi41dma 16 1 &cppi41dma 17 1
 701                                         &cppi41dma 18 1 &cppi41dma 19 1
 702                                         &cppi41dma 20 1 &cppi41dma 21 1
 703                                         &cppi41dma 22 1 &cppi41dma 23 1
 704                                         &cppi41dma 24 1 &cppi41dma 25 1
 705                                         &cppi41dma 26 1 &cppi41dma 27 1
 706                                         &cppi41dma 28 1 &cppi41dma 29 1>;
 707                                 dma-names =
 708                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 709                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 710                                         "rx14", "rx15",
 711                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 712                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 713                                         "tx14", "tx15";
 714                         };
 715
 716                         cppi41dma: dma-controller@47402000 {
 717                                 compatible = "ti,am3359-cppi41";
 718                                 reg =  <0x47400000 0x1000
 719                                         0x47402000 0x1000
 720                                         0x47403000 0x1000
 721                                         0x47404000 0x4000>;
 722                                 reg-names = "glue", "controller", "scheduler", "queuemgr";
 723                                 interrupts = <17>;
 724                                 interrupt-names = "glue";
 725                                 #dma-cells = <2>;
 726                                 #dma-channels = <30>;
 727                                 #dma-requests = <256>;
 728                                 status = "disabled";
 729                         };
 730                 };
 731
 732                 epwmss0: epwmss@48300000 {
 733                         compatible = "ti,am33xx-pwmss";
 734                         reg = <0x48300000 0x10>;
 735                         ti,hwmods = "epwmss0";
 736                         #address-cells = <1>;
 737                         #size-cells = <1>;
 738                         status = "disabled";
 739                         ranges = <0x48300100 0x48300100 0x80   /* ECAP */
 740                                   0x48300180 0x48300180 0x80   /* EQEP */
 741                                   0x48300200 0x48300200 0x80>; /* EHRPWM */
 742
 743                         ecap0: ecap@48300100 {
 744                                 compatible = "ti,am3352-ecap",
 745                                              "ti,am33xx-ecap";
 746                                 #pwm-cells = <3>;
 747                                 reg = <0x48300100 0x80>;
 748                                 clocks = <&l4ls_gclk>;
 749                                 clock-names = "fck";
 750                                 interrupts = <31>;
 751                                 interrupt-names = "ecap0";
 752                                 status = "disabled";
 753                         };
 754
 755                         ehrpwm0: pwm@48300200 {
 756                                 compatible = "ti,am3352-ehrpwm",
 757                                              "ti,am33xx-ehrpwm";
 758                                 #pwm-cells = <3>;
 759                                 reg = <0x48300200 0x80>;
 760                                 clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
 761                                 clock-names = "tbclk", "fck";
 762                                 status = "disabled";
 763                         };
 764                 };
 765
 766                 epwmss1: epwmss@48302000 {
 767                         compatible = "ti,am33xx-pwmss";
 768                         reg = <0x48302000 0x10>;
 769                         ti,hwmods = "epwmss1";
 770                         #address-cells = <1>;
 771                         #size-cells = <1>;
 772                         status = "disabled";
 773                         ranges = <0x48302100 0x48302100 0x80   /* ECAP */
 774                                   0x48302180 0x48302180 0x80   /* EQEP */
 775                                   0x48302200 0x48302200 0x80>; /* EHRPWM */
 776
 777                         ecap1: ecap@48302100 {
 778                                 compatible = "ti,am3352-ecap",
 779                                              "ti,am33xx-ecap";
 780                                 #pwm-cells = <3>;
 781                                 reg = <0x48302100 0x80>;
 782                                 clocks = <&l4ls_gclk>;
 783                                 clock-names = "fck";
 784                                 interrupts = <47>;
 785                                 interrupt-names = "ecap1";
 786                                 status = "disabled";
 787                         };
 788
 789                         ehrpwm1: pwm@48302200 {
 790                                 compatible = "ti,am3352-ehrpwm",
 791                                              "ti,am33xx-ehrpwm";
 792                                 #pwm-cells = <3>;
 793                                 reg = <0x48302200 0x80>;
 794                                 clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
 795                                 clock-names = "tbclk", "fck";
 796                                 status = "disabled";
 797                         };
 798                 };
 799
 800                 epwmss2: epwmss@48304000 {
 801                         compatible = "ti,am33xx-pwmss";
 802                         reg = <0x48304000 0x10>;
 803                         ti,hwmods = "epwmss2";
 804                         #address-cells = <1>;
 805                         #size-cells = <1>;
 806                         status = "disabled";
 807                         ranges = <0x48304100 0x48304100 0x80   /* ECAP */
 808                                   0x48304180 0x48304180 0x80   /* EQEP */
 809                                   0x48304200 0x48304200 0x80>; /* EHRPWM */
 810
 811                         ecap2: ecap@48304100 {
 812                                 compatible = "ti,am3352-ecap",
 813                                              "ti,am33xx-ecap";
 814                                 #pwm-cells = <3>;
 815                                 reg = <0x48304100 0x80>;
 816                                 clocks = <&l4ls_gclk>;
 817                                 clock-names = "fck";
 818                                 interrupts = <61>;
 819                                 interrupt-names = "ecap2";
 820                                 status = "disabled";
 821                         };
 822
 823                         ehrpwm2: pwm@48304200 {
 824                                 compatible = "ti,am3352-ehrpwm",
 825                                              "ti,am33xx-ehrpwm";
 826                                 #pwm-cells = <3>;
 827                                 reg = <0x48304200 0x80>;
 828                                 clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
 829                                 clock-names = "tbclk", "fck";
 830                                 status = "disabled";
 831                         };
 832                 };
 833
 834                 mac: ethernet@4a100000 {
 835                         compatible = "ti,am335x-cpsw","ti,cpsw";
 836                         ti,hwmods = "cpgmac0";
 837                         clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
 838                         clock-names = "fck", "cpts";
 839                         cpdma_channels = <8>;
 840                         ale_entries = <1024>;
 841                         bd_ram_size = <0x2000>;
 842                         no_bd_ram = <0>;
 843                         mac_control = <0x20>;
 844                         slaves = <2>;
 845                         active_slave = <0>;
 846                         cpts_clock_mult = <0x80000000>;
 847                         cpts_clock_shift = <29>;
 848                         reg = <0x4a100000 0x800
 849                                0x4a101200 0x100>;
 850                         #address-cells = <1>;
 851                         #size-cells = <1>;
 852                         interrupt-parent = <&intc>;
 853                         /*
 854                          * c0_rx_thresh_pend
 855                          * c0_rx_pend
 856                          * c0_tx_pend
 857                          * c0_misc_pend
 858                          */
 859                         interrupts = <40 41 42 43>;
 860                         ranges;
 861                         syscon = <&scm_conf>;
 862                         status = "disabled";
 863
 864                         davinci_mdio: mdio@4a101000 {
 865                                 compatible = "ti,cpsw-mdio","ti,davinci_mdio";
 866                                 #address-cells = <1>;
 867                                 #size-cells = <0>;
 868                                 ti,hwmods = "davinci_mdio";
 869                                 bus_freq = <1000000>;
 870                                 reg = <0x4a101000 0x100>;
 871                                 status = "disabled";
 872                         };
 873
 874                         cpsw_emac0: slave@4a100200 {
 875                                 /* Filled in by U-Boot */
 876                                 mac-address = [ 00 00 00 00 00 00 ];
 877                         };
 878
 879                         cpsw_emac1: slave@4a100300 {
 880                                 /* Filled in by U-Boot */
 881                                 mac-address = [ 00 00 00 00 00 00 ];
 882                         };
 883
 884                         phy_sel: cpsw-phy-sel@44e10650 {
 885                                 compatible = "ti,am3352-cpsw-phy-sel";
 886                                 reg= <0x44e10650 0x4>;
 887                                 reg-names = "gmii-sel";
 888                         };
 889                 };
 890
 891                 ocmcram: ocmcram@40300000 {
 892                         compatible = "mmio-sram";
 893                         reg = <0x40300000 0x10000>; /* 64k */
 894                 };
 895
 896                 elm: elm@48080000 {
 897                         compatible = "ti,am3352-elm";
 898                         reg = <0x48080000 0x2000>;
 899                         interrupts = <4>;
 900                         ti,hwmods = "elm";
 901                         status = "disabled";
 902                 };
 903
 904                 lcdc: lcdc@4830e000 {
 905                         compatible = "ti,am33xx-tilcdc";
 906                         reg = <0x4830e000 0x1000>;
 907                         interrupt-parent = <&intc>;
 908                         interrupts = <36>;
 909                         ti,hwmods = "lcdc";
 910                         status = "disabled";
 911                 };
 912
 913                 tscadc: tscadc@44e0d000 {
 914                         compatible = "ti,am3359-tscadc";
 915                         reg = <0x44e0d000 0x1000>;
 916                         interrupt-parent = <&intc>;
 917                         interrupts = <16>;
 918                         ti,hwmods = "adc_tsc";
 919                         status = "disabled";
 920
 921                         tsc {
 922                                 compatible = "ti,am3359-tsc";
 923                         };
 924                         am335x_adc: adc {
 925                                 #io-channel-cells = <1>;
 926                                 compatible = "ti,am3359-adc";
 927                         };
 928                 };
 929
 930                 gpmc: gpmc@50000000 {
 931                         compatible = "ti,am3352-gpmc";
 932                         ti,hwmods = "gpmc";
 933                         ti,no-idle-on-init;
 934                         reg = <0x50000000 0x2000>;
 935                         interrupts = <100>;
 936                         dmas = <&edma 52 0>;
 937                         dma-names = "rxtx";
 938                         gpmc,num-cs = <7>;
 939                         gpmc,num-waitpins = <2>;
 940                         #address-cells = <2>;
 941                         #size-cells = <1>;
 942                         interrupt-controller;
 943                         #interrupt-cells = <2>;
 944                         gpio-controller;
 945                         #gpio-cells = <2>;
 946                         status = "disabled";
 947                 };
 948
 949                 sham: sham@53100000 {
 950                         compatible = "ti,omap4-sham";
 951                         ti,hwmods = "sham";
 952                         reg = <0x53100000 0x200>;
 953                         interrupts = <109>;
 954                         dmas = <&edma 36 0>;
 955                         dma-names = "rx";
 956                 };
 957
 958                 aes: aes@53500000 {
 959                         compatible = "ti,omap4-aes";
 960                         ti,hwmods = "aes";
 961                         reg = <0x53500000 0xa0>;
 962                         interrupts = <103>;
 963                         dmas = <&edma 6 0>,
 964                                <&edma 5 0>;
 965                         dma-names = "tx", "rx";
 966                 };
 967
 968                 mcasp0: mcasp@48038000 {
 969                         compatible = "ti,am33xx-mcasp-audio";
 970                         ti,hwmods = "mcasp0";
 971                         reg = <0x48038000 0x2000>,
 972                               <0x46000000 0x400000>;
 973                         reg-names = "mpu", "dat";
 974                         interrupts = <80>, <81>;
 975                         interrupt-names = "tx", "rx";
 976                         status = "disabled";
 977                         dmas = <&edma 8 2>,
 978                                 <&edma 9 2>;
 979                         dma-names = "tx", "rx";
 980                 };
 981
 982                 mcasp1: mcasp@4803C000 {
 983                         compatible = "ti,am33xx-mcasp-audio";
 984                         ti,hwmods = "mcasp1";
 985                         reg = <0x4803C000 0x2000>,
 986                               <0x46400000 0x400000>;
 987                         reg-names = "mpu", "dat";
 988                         interrupts = <82>, <83>;
 989                         interrupt-names = "tx", "rx";
 990                         status = "disabled";
 991                         dmas = <&edma 10 2>,
 992                                 <&edma 11 2>;
 993                         dma-names = "tx", "rx";
 994                 };
 995
 996                 rng: rng@48310000 {
 997                         compatible = "ti,omap4-rng";
 998                         ti,hwmods = "rng";
 999                         reg = <0x48310000 0x2000>;
1000                         interrupts = <111>;
1001                 };
1002         };
1003 };
1004
1005 /include/ "am33xx-clocks.dtsi"