arch/arm/boot/dts/am437x-sk-evm.dts

   1 /*
   2  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /* AM437x SK EVM */
  10
  11 /dts-v1/;
  12
  13 #include "am4372.dtsi"
  14 #include <dt-bindings/pinctrl/am43xx.h>
  15 #include <dt-bindings/pwm/pwm.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/input/input.h>
  18
  19 / {
  20         model = "TI AM437x SK EVM";
  21         compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
  22
  23         aliases {
  24                 display0 = &lcd0;
  25         };
  26
  27         backlight {
  28                 compatible = "pwm-backlight";
  29                 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
  30                 brightness-levels = <0 51 53 56 62 75 101 152 255>;
  31                 default-brightness-level = <8>;
  32         };
  33
  34         sound {
  35                 compatible = "ti,da830-evm-audio";
  36                 ti,model = "AM437x-SK-EVM";
  37                 ti,audio-codec = <&tlv320aic3106>;
  38                 ti,mcasp-controller = <&mcasp1>;
  39                 ti,codec-clock-rate = <24000000>;
  40                 ti,audio-routing =
  41                         "Headphone Jack",       "HPLOUT",
  42                         "Headphone Jack",       "HPROUT";
  43         };
  44
  45         matrix_keypad: matrix_keypad@0 {
  46                 compatible = "gpio-matrix-keypad";
  47
  48                 pinctrl-names = "default";
  49                 pinctrl-0 = <&matrix_keypad_pins>;
  50
  51                 debounce-delay-ms = <5>;
  52                 col-scan-delay-us = <1500>;
  53
  54                 row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH          /* Bank5, pin5 */
  55                                 &gpio5 6 GPIO_ACTIVE_HIGH>;     /* Bank5, pin6 */
  56
  57                 col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH         /* Bank5, pin13 */
  58                                 &gpio5 4 GPIO_ACTIVE_HIGH>;     /* Bank5, pin4 */
  59
  60                 linux,keymap = <
  61                                 MATRIX_KEY(0, 0, KEY_DOWN)
  62                                 MATRIX_KEY(0, 1, KEY_RIGHT)
  63                                 MATRIX_KEY(1, 0, KEY_LEFT)
  64                                 MATRIX_KEY(1, 1, KEY_UP)
  65                         >;
  66         };
  67
  68         leds {
  69                 compatible = "gpio-leds";
  70
  71                 pinctrl-names = "default";
  72                 pinctrl-0 = <&leds_pins>;
  73
  74                 led@0 {
  75                         label = "am437x-sk:red:heartbeat";
  76                         gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 0 */
  77                         linux,default-trigger = "heartbeat";
  78                         default-state = "off";
  79                 };
  80
  81                 led@1 {
  82                         label = "am437x-sk:green:mmc1";
  83                         gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 1 */
  84                         linux,default-trigger = "mmc0";
  85                         default-state = "off";
  86                 };
  87
  88                 led@2 {
  89                         label = "am437x-sk:blue:cpu0";
  90                         gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 2 */
  91                         linux,default-trigger = "cpu0";
  92                         default-state = "off";
  93                 };
  94
  95                 led@3 {
  96                         label = "am437x-sk:blue:usr3";
  97                         gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 3 */
  98                         default-state = "off";
  99                 };
 100         };
 101
 102         lcd0: display {
 103                 compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
 104                 label = "lcd";
 105
 106                 pinctrl-names = "default";
 107                 pinctrl-0 = <&lcd_pins>;
 108
 109                 enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 110
 111                 panel-timing {
 112                         clock-frequency = <9000000>;
 113                         hactive = <480>;
 114                         vactive = <272>;
 115                         hfront-porch = <8>;
 116                         hback-porch = <43>;
 117                         hsync-len = <4>;
 118                         vback-porch = <12>;
 119                         vfront-porch = <4>;
 120                         vsync-len = <10>;
 121                         hsync-active = <0>;
 122                         vsync-active = <0>;
 123                         de-active = <1>;
 124                         pixelclk-active = <1>;
 125                 };
 126
 127                 port {
 128                         lcd_in: endpoint {
 129                                 remote-endpoint = <&dpi_out>;
 130                         };
 131                 };
 132         };
 133 };
 134
 135 &am43xx_pinmux {
 136         matrix_keypad_pins: matrix_keypad_pins {
 137                 pinctrl-single,pins = <
 138                         0x24c (PIN_OUTPUT | MUX_MODE7)  /* gpio5_13.gpio5_13 */
 139                         0x250 (PIN_OUTPUT | MUX_MODE7)  /* spi4_sclk.gpio5_4 */
 140                         0x254 (PIN_INPUT | MUX_MODE7)   /* spi4_d0.gpio5_5 */
 141                         0x258 (PIN_INPUT | MUX_MODE7)   /* spi4_d1.gpio5_5 */
 142                 >;
 143         };
 144
 145         leds_pins: leds_pins {
 146                 pinctrl-single,pins = <
 147                         0x228 (PIN_OUTPUT | MUX_MODE7)  /* uart3_rxd.gpio5_2 */
 148                         0x22c (PIN_OUTPUT | MUX_MODE7)  /* uart3_txd.gpio5_3 */
 149                         0x230 (PIN_OUTPUT | MUX_MODE7)  /* uart3_ctsn.gpio5_0 */
 150                         0x234 (PIN_OUTPUT | MUX_MODE7)  /* uart3_rtsn.gpio5_1 */
 151                 >;
 152         };
 153
 154         i2c0_pins: i2c0_pins {
 155                 pinctrl-single,pins = <
 156                         0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
 157                         0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 158                 >;
 159         };
 160
 161         i2c1_pins: i2c1_pins {
 162                 pinctrl-single,pins = <
 163                         0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
 164                         0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 165                 >;
 166         };
 167
 168         mmc1_pins: pinmux_mmc1_pins {
 169                 pinctrl-single,pins = <
 170                         0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 171                 >;
 172         };
 173
 174         ecap0_pins: backlight_pins {
 175                 pinctrl-single,pins = <
 176                         0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 177                 >;
 178         };
 179
 180         edt_ft5306_ts_pins: edt_ft5306_ts_pins {
 181                 pinctrl-single,pins = <
 182                         0x74 (PIN_INPUT | MUX_MODE7)    /* gpmc_wpn.gpio0_31 */
 183                         0x78 (PIN_OUTPUT | MUX_MODE7)   /* gpmc_be1n.gpio1_28 */
 184                 >;
 185         };
 186
 187         cpsw_default: cpsw_default {
 188                 pinctrl-single,pins = <
 189                         /* Slave 1 */
 190                         0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
 191                         0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
 192                         0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
 193                         0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
 194                         0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
 195                         0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
 196                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxclk.rmii1_rclk */
 197                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxdv.rgmii1_rctl */
 198                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd0.rgmii1_rd0 */
 199                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd1.rgmii1_rd1 */
 200                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd0.rgmii1_rd2 */
 201                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd1.rgmii1_rd3 */
 202
 203                         /* Slave 2 */
 204                         0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a6.rgmii2_tclk */
 205                         0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a0.rgmii2_tctl */
 206                         0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a5.rgmii2_td0 */
 207                         0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a4.rgmii2_td1 */
 208                         0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a3.rgmii2_td2 */
 209                         0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a2.rgmii2_td3 */
 210                         0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a7.rgmii2_rclk */
 211                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a1.rgmii2_rtcl */
 212                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a11.rgmii2_rd0 */
 213                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a10.rgmii2_rd1 */
 214                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a9.rgmii2_rd2 */
 215                         0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a8.rgmii2_rd3 */
 216                 >;
 217         };
 218
 219         cpsw_sleep: cpsw_sleep {
 220                 pinctrl-single,pins = <
 221                         /* Slave 1 reset value */
 222                         0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 223                         0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 224                         0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 225                         0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 226                         0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 227                         0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 228                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 229                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 230                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 231                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 232                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 233                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 234
 235                         /* Slave 2 reset value */
 236                         0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 237                         0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 238                         0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 239                         0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 240                         0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 241                         0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 242                         0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 243                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 244                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 245                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 246                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 247                         0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 248                 >;
 249         };
 250
 251         davinci_mdio_default: davinci_mdio_default {
 252                 pinctrl-single,pins = <
 253                         /* MDIO */
 254                         0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
 255                         0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
 256                 >;
 257         };
 258
 259         davinci_mdio_sleep: davinci_mdio_sleep {
 260                 pinctrl-single,pins = <
 261                         /* MDIO reset value */
 262                         0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 263                         0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 264                 >;
 265         };
 266
 267         dss_pins: dss_pins {
 268                 pinctrl-single,pins = <
 269                         0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1)   /* gpmc ad 8 -> DSS DATA 23 */
 270                         0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 271                         0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 272                         0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
 273                         0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 274                         0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 275                         0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 276                         0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1)   /* gpmc ad 15 -> DSS DATA 16 */
 277                         0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* DSS DATA 0 */
 278                         0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 279                         0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 280                         0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
 281                         0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 282                         0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 283                         0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 284                         0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
 285                         0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 286                         0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 287                         0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 288                         0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
 289                         0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 290                         0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 291                         0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 292                         0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* DSS DATA 15 */
 293                         0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* DSS VSYNC */
 294                         0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* DSS HSYNC */
 295                         0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* DSS PCLK */
 296                         0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* DSS AC BIAS EN */
 297
 298                 >;
 299         };
 300
 301         qspi_pins: qspi_pins {
 302                 pinctrl-single,pins = <
 303                         0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)    /* gpmc_csn0.qspi_csn */
 304                         0x88 (PIN_OUTPUT | MUX_MODE2)           /* gpmc_csn3.qspi_clk */
 305                         0x90 (PIN_INPUT_PULLUP | MUX_MODE3)     /* gpmc_advn_ale.qspi_d0 */
 306                         0x94 (PIN_INPUT_PULLUP | MUX_MODE3)     /* gpmc_oen_ren.qspi_d1 */
 307                         0x98 (PIN_INPUT_PULLUP | MUX_MODE3)     /* gpmc_wen.qspi_d2 */
 308                         0x9c (PIN_INPUT_PULLUP | MUX_MODE3)     /* gpmc_be0n_cle.qspi_d3 */
 309                 >;
 310         };
 311
 312         mcasp1_pins: mcasp1_pins {
 313                 pinctrl-single,pins = <
 314                         0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)  /* mii1_crs.mcasp1_aclkx */
 315                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)  /* mii1_rxerr.mcasp1_fsx */
 316                         0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 317                         0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)  /* rmii1_ref_clk.mcasp1_axr3 */
 318                 >;
 319         };
 320
 321         lcd_pins: lcd_pins {
 322                 pinctrl-single,pins = <
 323                         /* GPIO 5_8 to select LCD / HDMI */
 324                         0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
 325                 >;
 326         };
 327 };
 328
 329 &i2c0 {
 330         status = "okay";
 331         pinctrl-names = "default";
 332         pinctrl-0 = <&i2c0_pins>;
 333         clock-frequency = <400000>;
 334
 335         tps@24 {
 336                 compatible = "ti,tps65218";
 337                 reg = <0x24>;
 338                 interrupt-parent = <&gic>;
 339                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 340                 interrupt-controller;
 341                 #interrupt-cells = <2>;
 342
 343                 dcdc1: regulator-dcdc1 {
 344                         compatible = "ti,tps65218-dcdc1";
 345                         /* VDD_CORE limits min of OPP50 and max of OPP100 */
 346                         regulator-name = "vdd_core";
 347                         regulator-min-microvolt = <912000>;
 348                         regulator-max-microvolt = <1144000>;
 349                         regulator-boot-on;
 350                         regulator-always-on;
 351                 };
 352
 353                 dcdc2: regulator-dcdc2 {
 354                         compatible = "ti,tps65218-dcdc2";
 355                         /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
 356                         regulator-name = "vdd_mpu";
 357                         regulator-min-microvolt = <912000>;
 358                         regulator-max-microvolt = <1378000>;
 359                         regulator-boot-on;
 360                         regulator-always-on;
 361                 };
 362
 363                 dcdc3: regulator-dcdc3 {
 364                         compatible = "ti,tps65218-dcdc3";
 365                         regulator-name = "vdds_ddr";
 366                         regulator-min-microvolt = <1500000>;
 367                         regulator-max-microvolt = <1500000>;
 368                         regulator-boot-on;
 369                         regulator-always-on;
 370                 };
 371
 372                 dcdc4: regulator-dcdc4 {
 373                         compatible = "ti,tps65218-dcdc4";
 374                         regulator-name = "v3_3d";
 375                         regulator-min-microvolt = <3300000>;
 376                         regulator-max-microvolt = <3300000>;
 377                         regulator-boot-on;
 378                         regulator-always-on;
 379                 };
 380
 381                 ldo1: regulator-ldo1 {
 382                         compatible = "ti,tps65218-ldo1";
 383                         regulator-name = "v1_8d";
 384                         regulator-min-microvolt = <1800000>;
 385                         regulator-max-microvolt = <1800000>;
 386                         regulator-boot-on;
 387                         regulator-always-on;
 388                 };
 389
 390         };
 391
 392         at24@50 {
 393                 compatible = "at24,24c256";
 394                 pagesize = <64>;
 395                 reg = <0x50>;
 396         };
 397 };
 398
 399 &i2c1 {
 400         status = "okay";
 401         pinctrl-names = "default";
 402         pinctrl-0 = <&i2c1_pins>;
 403         clock-frequency = <400000>;
 404
 405         edt-ft5306@38 {
 406                 status = "okay";
 407                 compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
 408                 pinctrl-names = "default";
 409                 pinctrl-0 = <&edt_ft5306_ts_pins>;
 410
 411                 reg = <0x38>;
 412                 interrupt-parent = <&gpio0>;
 413                 interrupts = <31 0>;
 414
 415                 wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 416
 417                 touchscreen-size-x = <480>;
 418                 touchscreen-size-y = <272>;
 419         };
 420
 421         tlv320aic3106: tlv320aic3106@1b {
 422                 compatible = "ti,tlv320aic3106";
 423                 reg = <0x1b>;
 424                 status = "okay";
 425
 426                 /* Regulators */
 427                 AVDD-supply = <&dcdc4>;
 428                 IOVDD-supply = <&dcdc4>;
 429                 DRVDD-supply = <&dcdc4>;
 430                 DVDD-supply = <&ldo1>;
 431         };
 432
 433         lis331dlh@18 {
 434                 compatible = "st,lis331dlh";
 435                 reg = <0x18>;
 436                 status = "okay";
 437
 438                 Vdd-supply = <&dcdc4>;
 439                 Vdd_IO-supply = <&dcdc4>;
 440                 interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
 441         };
 442 };
 443
 444 &epwmss0 {
 445         status = "okay";
 446 };
 447
 448 &ecap0 {
 449         status = "okay";
 450         pinctrl-names = "default";
 451         pinctrl-0 = <&ecap0_pins>;
 452 };
 453
 454 &gpio0 {
 455         status = "okay";
 456 };
 457
 458 &gpio1 {
 459         status = "okay";
 460 };
 461
 462 &gpio5 {
 463         status = "okay";
 464 };
 465
 466 &mmc1 {
 467         status = "okay";
 468         pinctrl-names = "default";
 469         pinctrl-0 = <&mmc1_pins>;
 470
 471         vmmc-supply = <&dcdc4>;
 472         bus-width = <4>;
 473         cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 474 };
 475
 476 &usb2_phy1 {
 477         status = "okay";
 478 };
 479
 480 &usb1 {
 481         dr_mode = "peripheral";
 482         status = "okay";
 483 };
 484
 485 &usb2_phy2 {
 486         status = "okay";
 487 };
 488
 489 &usb2 {
 490         dr_mode = "host";
 491         status = "okay";
 492 };
 493
 494 &qspi {
 495         status = "okay";
 496         pinctrl-names = "default";
 497         pinctrl-0 = <&qspi_pins>;
 498
 499         spi-max-frequency = <48000000>;
 500         m25p80@0 {
 501                 compatible = "mx66l51235l";
 502                 spi-max-frequency = <48000000>;
 503                 reg = <0>;
 504                 spi-cpol;
 505                 spi-cpha;
 506                 spi-tx-bus-width = <1>;
 507                 spi-rx-bus-width = <4>;
 508                 #address-cells = <1>;
 509                 #size-cells = <1>;
 510
 511                 /* MTD partition table.
 512                  * The ROM checks the first 512KiB
 513                  * for a valid file to boot(XIP).
 514                  */
 515                 partition@0 {
 516                         label = "QSPI.U_BOOT";
 517                         reg = <0x00000000 0x000080000>;
 518                 };
 519                 partition@1 {
 520                         label = "QSPI.U_BOOT.backup";
 521                         reg = <0x00080000 0x00080000>;
 522                 };
 523                 partition@2 {
 524                         label = "QSPI.U-BOOT-SPL_OS";
 525                         reg = <0x00100000 0x00010000>;
 526                 };
 527                 partition@3 {
 528                         label = "QSPI.U_BOOT_ENV";
 529                         reg = <0x00110000 0x00010000>;
 530                 };
 531                 partition@4 {
 532                         label = "QSPI.U-BOOT-ENV.backup";
 533                         reg = <0x00120000 0x00010000>;
 534                 };
 535                 partition@5 {
 536                         label = "QSPI.KERNEL";
 537                         reg = <0x00130000 0x0800000>;
 538                 };
 539                 partition@6 {
 540                         label = "QSPI.FILESYSTEM";
 541                         reg = <0x00930000 0x36D0000>;
 542                 };
 543         };
 544 };
 545
 546 &mac {
 547         pinctrl-names = "default", "sleep";
 548         pinctrl-0 = <&cpsw_default>;
 549         pinctrl-1 = <&cpsw_sleep>;
 550         dual_emac = <1>;
 551         status = "okay";
 552 };
 553
 554 &davinci_mdio {
 555         pinctrl-names = "default", "sleep";
 556         pinctrl-0 = <&davinci_mdio_default>;
 557         pinctrl-1 = <&davinci_mdio_sleep>;
 558         status = "okay";
 559 };
 560
 561 &cpsw_emac0 {
 562         phy_id = <&davinci_mdio>, <4>;
 563         phy-mode = "rgmii";
 564         dual_emac_res_vlan = <1>;
 565 };
 566
 567 &cpsw_emac1 {
 568         phy_id = <&davinci_mdio>, <5>;
 569         phy-mode = "rgmii";
 570         dual_emac_res_vlan = <2>;
 571 };
 572
 573 &elm {
 574         status = "okay";
 575 };
 576
 577 &mcasp1 {
 578         pinctrl-names = "default";
 579         pinctrl-0 = <&mcasp1_pins>;
 580
 581         status = "okay";
 582
 583         op-mode = <0>;
 584         tdm-slots = <2>;
 585         serial-dir = <
 586                 0 0 1 2
 587         >;
 588
 589         tx-num-evt = <1>;
 590         rx-num-evt = <1>;
 591 };
 592
 593 &dss {
 594         status = "okay";
 595
 596         pinctrl-names = "default";
 597         pinctrl-0 = <&dss_pins>;
 598
 599         port {
 600                 dpi_out: endpoint@0 {
 601                         remote-endpoint = <&lcd_in>;
 602                         data-lines = <24>;
 603                 };
 604         };
 605 };
 606
 607 &rtc {
 608         status = "okay";
 609 };
 610
 611 &wdt {
 612         status = "okay";
 613 };