arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include "skeleton.dtsi"
  14 #include "imx28-pinfunc.h"
  15
  16 / {
  17         interrupt-parent = <&icoll>;
  18
  19         aliases {
  20                 ethernet0 = &mac0;
  21                 ethernet1 = &mac1;
  22                 gpio0 = &gpio0;
  23                 gpio1 = &gpio1;
  24                 gpio2 = &gpio2;
  25                 gpio3 = &gpio3;
  26                 gpio4 = &gpio4;
  27                 saif0 = &saif0;
  28                 saif1 = &saif1;
  29                 serial0 = &auart0;
  30                 serial1 = &auart1;
  31                 serial2 = &auart2;
  32                 serial3 = &auart3;
  33                 serial4 = &auart4;
  34                 spi0 = &ssp1;
  35                 spi1 = &ssp2;
  36                 usbphy0 = &usbphy0;
  37                 usbphy1 = &usbphy1;
  38         };
  39
  40         cpus {
  41                 #address-cells = <0>;
  42                 #size-cells = <0>;
  43
  44                 cpu {
  45                         compatible = "arm,arm926ej-s";
  46                         device_type = "cpu";
  47                 };
  48         };
  49
  50         apb@80000000 {
  51                 compatible = "simple-bus";
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54                 reg = <0x80000000 0x80000>;
  55                 ranges;
  56
  57                 apbh@80000000 {
  58                         compatible = "simple-bus";
  59                         #address-cells = <1>;
  60                         #size-cells = <1>;
  61                         reg = <0x80000000 0x3c900>;
  62                         ranges;
  63
  64                         icoll: interrupt-controller@80000000 {
  65                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  66                                 interrupt-controller;
  67                                 #interrupt-cells = <1>;
  68                                 reg = <0x80000000 0x2000>;
  69                         };
  70
  71                         hsadc: hsadc@80002000 {
  72                                 reg = <0x80002000 0x2000>;
  73                                 interrupts = <13>;
  74                                 dmas = <&dma_apbh 12>;
  75                                 dma-names = "rx";
  76                                 status = "disabled";
  77                         };
  78
  79                         dma_apbh: dma-apbh@80004000 {
  80                                 compatible = "fsl,imx28-dma-apbh";
  81                                 reg = <0x80004000 0x2000>;
  82                                 interrupts = <82 83 84 85
  83                                               88 88 88 88
  84                                               88 88 88 88
  85                                               87 86 0 0>;
  86                                 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
  87                                                   "gpmi0", "gmpi1", "gpmi2", "gmpi3",
  88                                                   "gpmi4", "gmpi5", "gpmi6", "gmpi7",
  89                                                   "hsadc", "lcdif", "empty", "empty";
  90                                 #dma-cells = <1>;
  91                                 dma-channels = <16>;
  92                                 clocks = <&clks 25>;
  93                         };
  94
  95                         perfmon: perfmon@80006000 {
  96                                 reg = <0x80006000 0x800>;
  97                                 interrupts = <27>;
  98                                 status = "disabled";
  99                         };
 100
 101                         gpmi: gpmi-nand@8000c000 {
 102                                 compatible = "fsl,imx28-gpmi-nand";
 103                                 #address-cells = <1>;
 104                                 #size-cells = <1>;
 105                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 106                                 reg-names = "gpmi-nand", "bch";
 107                                 interrupts = <41>;
 108                                 interrupt-names = "bch";
 109                                 clocks = <&clks 50>;
 110                                 clock-names = "gpmi_io";
 111                                 dmas = <&dma_apbh 4>;
 112                                 dma-names = "rx-tx";
 113                                 status = "disabled";
 114                         };
 115
 116                         ssp0: ssp@80010000 {
 117                                 #address-cells = <1>;
 118                                 #size-cells = <0>;
 119                                 reg = <0x80010000 0x2000>;
 120                                 interrupts = <96>;
 121                                 clocks = <&clks 46>;
 122                                 dmas = <&dma_apbh 0>;
 123                                 dma-names = "rx-tx";
 124                                 status = "disabled";
 125                         };
 126
 127                         ssp1: ssp@80012000 {
 128                                 #address-cells = <1>;
 129                                 #size-cells = <0>;
 130                                 reg = <0x80012000 0x2000>;
 131                                 interrupts = <97>;
 132                                 clocks = <&clks 47>;
 133                                 dmas = <&dma_apbh 1>;
 134                                 dma-names = "rx-tx";
 135                                 status = "disabled";
 136                         };
 137
 138                         ssp2: ssp@80014000 {
 139                                 #address-cells = <1>;
 140                                 #size-cells = <0>;
 141                                 reg = <0x80014000 0x2000>;
 142                                 interrupts = <98>;
 143                                 clocks = <&clks 48>;
 144                                 dmas = <&dma_apbh 2>;
 145                                 dma-names = "rx-tx";
 146                                 status = "disabled";
 147                         };
 148
 149                         ssp3: ssp@80016000 {
 150                                 #address-cells = <1>;
 151                                 #size-cells = <0>;
 152                                 reg = <0x80016000 0x2000>;
 153                                 interrupts = <99>;
 154                                 clocks = <&clks 49>;
 155                                 dmas = <&dma_apbh 3>;
 156                                 dma-names = "rx-tx";
 157                                 status = "disabled";
 158                         };
 159
 160                         pinctrl: pinctrl@80018000 {
 161                                 #address-cells = <1>;
 162                                 #size-cells = <0>;
 163                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 164                                 reg = <0x80018000 0x2000>;
 165
 166                                 gpio0: gpio@0 {
 167                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 168                                         reg = <0>;
 169                                         interrupts = <127>;
 170                                         gpio-controller;
 171                                         #gpio-cells = <2>;
 172                                         interrupt-controller;
 173                                         #interrupt-cells = <2>;
 174                                 };
 175
 176                                 gpio1: gpio@1 {
 177                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 178                                         reg = <1>;
 179                                         interrupts = <126>;
 180                                         gpio-controller;
 181                                         #gpio-cells = <2>;
 182                                         interrupt-controller;
 183                                         #interrupt-cells = <2>;
 184                                 };
 185
 186                                 gpio2: gpio@2 {
 187                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 188                                         reg = <2>;
 189                                         interrupts = <125>;
 190                                         gpio-controller;
 191                                         #gpio-cells = <2>;
 192                                         interrupt-controller;
 193                                         #interrupt-cells = <2>;
 194                                 };
 195
 196                                 gpio3: gpio@3 {
 197                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 198                                         reg = <3>;
 199                                         interrupts = <124>;
 200                                         gpio-controller;
 201                                         #gpio-cells = <2>;
 202                                         interrupt-controller;
 203                                         #interrupt-cells = <2>;
 204                                 };
 205
 206                                 gpio4: gpio@4 {
 207                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 208                                         reg = <4>;
 209                                         interrupts = <123>;
 210                                         gpio-controller;
 211                                         #gpio-cells = <2>;
 212                                         interrupt-controller;
 213                                         #interrupt-cells = <2>;
 214                                 };
 215
 216                                 duart_pins_a: duart@0 {
 217                                         reg = <0>;
 218                                         fsl,pinmux-ids = <
 219                                                 MX28_PAD_PWM0__DUART_RX
 220                                                 MX28_PAD_PWM1__DUART_TX
 221                                         >;
 222                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 223                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 224                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 225                                 };
 226
 227                                 duart_pins_b: duart@1 {
 228                                         reg = <1>;
 229                                         fsl,pinmux-ids = <
 230                                                 MX28_PAD_AUART0_CTS__DUART_RX
 231                                                 MX28_PAD_AUART0_RTS__DUART_TX
 232                                         >;
 233                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 234                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 235                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 236                                 };
 237
 238                                 duart_4pins_a: duart-4pins@0 {
 239                                         reg = <0>;
 240                                         fsl,pinmux-ids = <
 241                                                 MX28_PAD_AUART0_CTS__DUART_RX
 242                                                 MX28_PAD_AUART0_RTS__DUART_TX
 243                                                 MX28_PAD_AUART0_RX__DUART_CTS
 244                                                 MX28_PAD_AUART0_TX__DUART_RTS
 245                                         >;
 246                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 247                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 248                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 249                                 };
 250
 251                                 gpmi_pins_a: gpmi-nand@0 {
 252                                         reg = <0>;
 253                                         fsl,pinmux-ids = <
 254                                                 MX28_PAD_GPMI_D00__GPMI_D0
 255                                                 MX28_PAD_GPMI_D01__GPMI_D1
 256                                                 MX28_PAD_GPMI_D02__GPMI_D2
 257                                                 MX28_PAD_GPMI_D03__GPMI_D3
 258                                                 MX28_PAD_GPMI_D04__GPMI_D4
 259                                                 MX28_PAD_GPMI_D05__GPMI_D5
 260                                                 MX28_PAD_GPMI_D06__GPMI_D6
 261                                                 MX28_PAD_GPMI_D07__GPMI_D7
 262                                                 MX28_PAD_GPMI_CE0N__GPMI_CE0N
 263                                                 MX28_PAD_GPMI_RDY0__GPMI_READY0
 264                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 265                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 266                                                 MX28_PAD_GPMI_ALE__GPMI_ALE
 267                                                 MX28_PAD_GPMI_CLE__GPMI_CLE
 268                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 269                                         >;
 270                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 271                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 272                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 273                                 };
 274
 275                                 gpmi_status_cfg: gpmi-status-cfg {
 276                                         fsl,pinmux-ids = <
 277                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 278                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 279                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 280                                         >;
 281                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 282                                 };
 283
 284                                 auart0_pins_a: auart0@0 {
 285                                         reg = <0>;
 286                                         fsl,pinmux-ids = <
 287                                                 MX28_PAD_AUART0_RX__AUART0_RX
 288                                                 MX28_PAD_AUART0_TX__AUART0_TX
 289                                                 MX28_PAD_AUART0_CTS__AUART0_CTS
 290                                                 MX28_PAD_AUART0_RTS__AUART0_RTS
 291                                         >;
 292                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 293                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 294                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 295                                 };
 296
 297                                 auart0_2pins_a: auart0-2pins@0 {
 298                                         reg = <0>;
 299                                         fsl,pinmux-ids = <
 300                                                 MX28_PAD_AUART0_RX__AUART0_RX
 301                                                 MX28_PAD_AUART0_TX__AUART0_TX
 302                                         >;
 303                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 304                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 305                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 306                                 };
 307
 308                                 auart1_pins_a: auart1@0 {
 309                                         reg = <0>;
 310                                         fsl,pinmux-ids = <
 311                                                 MX28_PAD_AUART1_RX__AUART1_RX
 312                                                 MX28_PAD_AUART1_TX__AUART1_TX
 313                                                 MX28_PAD_AUART1_CTS__AUART1_CTS
 314                                                 MX28_PAD_AUART1_RTS__AUART1_RTS
 315                                         >;
 316                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 317                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 318                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 319                                 };
 320
 321                                 auart1_2pins_a: auart1-2pins@0 {
 322                                         reg = <0>;
 323                                         fsl,pinmux-ids = <
 324                                                 MX28_PAD_AUART1_RX__AUART1_RX
 325                                                 MX28_PAD_AUART1_TX__AUART1_TX
 326                                         >;
 327                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 328                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 329                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 330                                 };
 331
 332                                 auart2_2pins_a: auart2-2pins@0 {
 333                                         reg = <0>;
 334                                         fsl,pinmux-ids = <
 335                                                 MX28_PAD_SSP2_SCK__AUART2_RX
 336                                                 MX28_PAD_SSP2_MOSI__AUART2_TX
 337                                         >;
 338                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 339                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 340                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 341                                 };
 342
 343                                 auart2_2pins_b: auart2-2pins@1 {
 344                                         reg = <1>;
 345                                         fsl,pinmux-ids = <
 346                                                 MX28_PAD_AUART2_RX__AUART2_RX
 347                                                 MX28_PAD_AUART2_TX__AUART2_TX
 348                                         >;
 349                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 350                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 351                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 352                                 };
 353
 354                                 auart2_pins_a: auart2-pins@0 {
 355                                         reg = <0>;
 356                                         fsl,pinmux-ids = <
 357                                                 MX28_PAD_AUART2_RX__AUART2_RX
 358                                                 MX28_PAD_AUART2_TX__AUART2_TX
 359                                                 MX28_PAD_AUART2_CTS__AUART2_CTS
 360                                                 MX28_PAD_AUART2_RTS__AUART2_RTS
 361                                         >;
 362                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 363                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 364                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 365                                 };
 366
 367                                 auart3_pins_a: auart3@0 {
 368                                         reg = <0>;
 369                                         fsl,pinmux-ids = <
 370                                                 MX28_PAD_AUART3_RX__AUART3_RX
 371                                                 MX28_PAD_AUART3_TX__AUART3_TX
 372                                                 MX28_PAD_AUART3_CTS__AUART3_CTS
 373                                                 MX28_PAD_AUART3_RTS__AUART3_RTS
 374                                         >;
 375                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 376                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 377                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 378                                 };
 379
 380                                 auart3_2pins_a: auart3-2pins@0 {
 381                                         reg = <0>;
 382                                         fsl,pinmux-ids = <
 383                                                 MX28_PAD_SSP2_MISO__AUART3_RX
 384                                                 MX28_PAD_SSP2_SS0__AUART3_TX
 385                                         >;
 386                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 387                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 388                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 389                                 };
 390
 391                                 auart3_2pins_b: auart3-2pins@1 {
 392                                         reg = <1>;
 393                                         fsl,pinmux-ids = <
 394                                                 MX28_PAD_AUART3_RX__AUART3_RX
 395                                                 MX28_PAD_AUART3_TX__AUART3_TX
 396                                         >;
 397                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 398                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 399                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 400                                 };
 401
 402                                 auart4_2pins_a: auart4@0 {
 403                                         reg = <0>;
 404                                         fsl,pinmux-ids = <
 405                                                 MX28_PAD_SSP3_SCK__AUART4_TX
 406                                                 MX28_PAD_SSP3_MOSI__AUART4_RX
 407                                         >;
 408                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 409                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 410                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 411                                 };
 412
 413                                 auart4_2pins_b: auart4@1 {
 414                                         reg = <1>;
 415                                         fsl,pinmux-ids = <
 416                                                 MX28_PAD_AUART0_CTS__AUART4_RX
 417                                                 MX28_PAD_AUART0_RTS__AUART4_TX
 418                                         >;
 419                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 420                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 421                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 422                                 };
 423
 424                                 mac0_pins_a: mac0@0 {
 425                                         reg = <0>;
 426                                         fsl,pinmux-ids = <
 427                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 428                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 429                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 430                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 431                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 432                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 433                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 434                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 435                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 436                                         >;
 437                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 438                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 439                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 440                                 };
 441
 442                                 mac0_pins_b: mac0@1 {
 443                                         reg = <1>;
 444                                         fsl,pinmux-ids = <
 445                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 446                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 447                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 448                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 449                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 450                                                 MX28_PAD_ENET0_RXD2__ENET0_RXD2
 451                                                 MX28_PAD_ENET0_RXD3__ENET0_RXD3
 452                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 453                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 454                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 455                                                 MX28_PAD_ENET0_TXD2__ENET0_TXD2
 456                                                 MX28_PAD_ENET0_TXD3__ENET0_TXD3
 457                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 458                                                 MX28_PAD_ENET0_COL__ENET0_COL
 459                                                 MX28_PAD_ENET0_CRS__ENET0_CRS
 460                                                 MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
 461                                                 MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
 462                                                 >;
 463                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 464                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 465                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 466                                 };
 467
 468                                 mac1_pins_a: mac1@0 {
 469                                         reg = <0>;
 470                                         fsl,pinmux-ids = <
 471                                                 MX28_PAD_ENET0_CRS__ENET1_RX_EN
 472                                                 MX28_PAD_ENET0_RXD2__ENET1_RXD0
 473                                                 MX28_PAD_ENET0_RXD3__ENET1_RXD1
 474                                                 MX28_PAD_ENET0_COL__ENET1_TX_EN
 475                                                 MX28_PAD_ENET0_TXD2__ENET1_TXD0
 476                                                 MX28_PAD_ENET0_TXD3__ENET1_TXD1
 477                                         >;
 478                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 479                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 480                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 481                                 };
 482
 483                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 484                                         reg = <0>;
 485                                         fsl,pinmux-ids = <
 486                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 487                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 488                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 489                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 490                                                 MX28_PAD_SSP0_DATA4__SSP0_D4
 491                                                 MX28_PAD_SSP0_DATA5__SSP0_D5
 492                                                 MX28_PAD_SSP0_DATA6__SSP0_D6
 493                                                 MX28_PAD_SSP0_DATA7__SSP0_D7
 494                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 495                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 496                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 497                                         >;
 498                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 499                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 500                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 501                                 };
 502
 503                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 504                                         reg = <0>;
 505                                         fsl,pinmux-ids = <
 506                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 507                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 508                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 509                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 510                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 511                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 512                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 513                                         >;
 514                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 515                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 516                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 517                                 };
 518
 519                                 mmc0_cd_cfg: mmc0-cd-cfg {
 520                                         fsl,pinmux-ids = <
 521                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 522                                         >;
 523                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 524                                 };
 525
 526                                 mmc0_sck_cfg: mmc0-sck-cfg {
 527                                         fsl,pinmux-ids = <
 528                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 529                                         >;
 530                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 531                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 532                                 };
 533
 534                                 mmc1_4bit_pins_a: mmc1-4bit@0 {
 535                                         reg = <0>;
 536                                         fsl,pinmux-ids = <
 537                                                 MX28_PAD_GPMI_D00__SSP1_D0
 538                                                 MX28_PAD_GPMI_D01__SSP1_D1
 539                                                 MX28_PAD_GPMI_D02__SSP1_D2
 540                                                 MX28_PAD_GPMI_D03__SSP1_D3
 541                                                 MX28_PAD_GPMI_RDY1__SSP1_CMD
 542                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 543                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
 544                                         >;
 545                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 546                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 547                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 548                                 };
 549
 550                                 mmc1_cd_cfg: mmc1-cd-cfg {
 551                                         fsl,pinmux-ids = <
 552                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 553                                         >;
 554                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 555                                 };
 556
 557                                 mmc1_sck_cfg: mmc1-sck-cfg {
 558                                         fsl,pinmux-ids = <
 559                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
 560                                         >;
 561                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 562                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 563                                 };
 564
 565
 566                                 mmc2_4bit_pins_a: mmc2-4bit@0 {
 567                                         reg = <0>;
 568                                         fsl,pinmux-ids = <
 569                                                 MX28_PAD_SSP0_DATA4__SSP2_D0
 570                                                 MX28_PAD_SSP1_SCK__SSP2_D1
 571                                                 MX28_PAD_SSP1_CMD__SSP2_D2
 572                                                 MX28_PAD_SSP0_DATA5__SSP2_D3
 573                                                 MX28_PAD_SSP0_DATA6__SSP2_CMD
 574                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 575                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 576                                         >;
 577                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 578                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 579                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 580                                 };
 581
 582                                 mmc2_cd_cfg: mmc2-cd-cfg {
 583                                         fsl,pinmux-ids = <
 584                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 585                                         >;
 586                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 587                                 };
 588
 589                                 mmc2_sck_cfg: mmc2-sck-cfg {
 590                                         fsl,pinmux-ids = <
 591                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 592                                         >;
 593                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 594                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 595                                 };
 596
 597                                 i2c0_pins_a: i2c0@0 {
 598                                         reg = <0>;
 599                                         fsl,pinmux-ids = <
 600                                                 MX28_PAD_I2C0_SCL__I2C0_SCL
 601                                                 MX28_PAD_I2C0_SDA__I2C0_SDA
 602                                         >;
 603                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 604                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 605                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 606                                 };
 607
 608                                 i2c0_pins_b: i2c0@1 {
 609                                         reg = <1>;
 610                                         fsl,pinmux-ids = <
 611                                                 MX28_PAD_AUART0_RX__I2C0_SCL
 612                                                 MX28_PAD_AUART0_TX__I2C0_SDA
 613                                         >;
 614                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 615                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 616                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 617                                 };
 618
 619                                 i2c1_pins_a: i2c1@0 {
 620                                         reg = <0>;
 621                                         fsl,pinmux-ids = <
 622                                                 MX28_PAD_PWM0__I2C1_SCL
 623                                                 MX28_PAD_PWM1__I2C1_SDA
 624                                         >;
 625                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 626                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 627                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 628                                 };
 629
 630                                 i2c1_pins_b: i2c1@1 {
 631                                         reg = <1>;
 632                                         fsl,pinmux-ids = <
 633                                                 MX28_PAD_AUART2_CTS__I2C1_SCL
 634                                                 MX28_PAD_AUART2_RTS__I2C1_SDA
 635                                         >;
 636                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 637                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 638                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 639                                 };
 640
 641                                 saif0_pins_a: saif0@0 {
 642                                         reg = <0>;
 643                                         fsl,pinmux-ids = <
 644                                                 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
 645                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 646                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 647                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 648                                         >;
 649                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 650                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 651                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 652                                 };
 653
 654                                 saif0_pins_b: saif0@1 {
 655                                         reg = <1>;
 656                                         fsl,pinmux-ids = <
 657                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 658                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 659                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 660                                         >;
 661                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 662                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 663                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 664                                 };
 665
 666                                 saif1_pins_a: saif1@0 {
 667                                         reg = <0>;
 668                                         fsl,pinmux-ids = <
 669                                                 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 670                                         >;
 671                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 672                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 673                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 674                                 };
 675
 676                                 pwm0_pins_a: pwm0@0 {
 677                                         reg = <0>;
 678                                         fsl,pinmux-ids = <
 679                                                 MX28_PAD_PWM0__PWM_0
 680                                         >;
 681                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 682                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 683                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 684                                 };
 685
 686                                 pwm2_pins_a: pwm2@0 {
 687                                         reg = <0>;
 688                                         fsl,pinmux-ids = <
 689                                                 MX28_PAD_PWM2__PWM_2
 690                                         >;
 691                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 692                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 693                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 694                                 };
 695
 696                                 pwm3_pins_a: pwm3@0 {
 697                                         reg = <0>;
 698                                         fsl,pinmux-ids = <
 699                                                 MX28_PAD_PWM3__PWM_3
 700                                         >;
 701                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 702                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 703                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 704                                 };
 705
 706                                 pwm3_pins_b: pwm3@1 {
 707                                         reg = <1>;
 708                                         fsl,pinmux-ids = <
 709                                                 MX28_PAD_SAIF0_MCLK__PWM_3
 710                                         >;
 711                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 712                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 713                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 714                                 };
 715
 716                                 pwm4_pins_a: pwm4@0 {
 717                                         reg = <0>;
 718                                         fsl,pinmux-ids = <
 719                                                 MX28_PAD_PWM4__PWM_4
 720                                         >;
 721                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 722                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 723                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 724                                 };
 725
 726                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 727                                         reg = <0>;
 728                                         fsl,pinmux-ids = <
 729                                                 MX28_PAD_LCD_D00__LCD_D0
 730                                                 MX28_PAD_LCD_D01__LCD_D1
 731                                                 MX28_PAD_LCD_D02__LCD_D2
 732                                                 MX28_PAD_LCD_D03__LCD_D3
 733                                                 MX28_PAD_LCD_D04__LCD_D4
 734                                                 MX28_PAD_LCD_D05__LCD_D5
 735                                                 MX28_PAD_LCD_D06__LCD_D6
 736                                                 MX28_PAD_LCD_D07__LCD_D7
 737                                                 MX28_PAD_LCD_D08__LCD_D8
 738                                                 MX28_PAD_LCD_D09__LCD_D9
 739                                                 MX28_PAD_LCD_D10__LCD_D10
 740                                                 MX28_PAD_LCD_D11__LCD_D11
 741                                                 MX28_PAD_LCD_D12__LCD_D12
 742                                                 MX28_PAD_LCD_D13__LCD_D13
 743                                                 MX28_PAD_LCD_D14__LCD_D14
 744                                                 MX28_PAD_LCD_D15__LCD_D15
 745                                                 MX28_PAD_LCD_D16__LCD_D16
 746                                                 MX28_PAD_LCD_D17__LCD_D17
 747                                                 MX28_PAD_LCD_D18__LCD_D18
 748                                                 MX28_PAD_LCD_D19__LCD_D19
 749                                                 MX28_PAD_LCD_D20__LCD_D20
 750                                                 MX28_PAD_LCD_D21__LCD_D21
 751                                                 MX28_PAD_LCD_D22__LCD_D22
 752                                                 MX28_PAD_LCD_D23__LCD_D23
 753                                         >;
 754                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 755                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 756                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 757                                 };
 758
 759                                 lcdif_18bit_pins_a: lcdif-18bit@0 {
 760                                         reg = <0>;
 761                                         fsl,pinmux-ids = <
 762                                                 MX28_PAD_LCD_D00__LCD_D0
 763                                                 MX28_PAD_LCD_D01__LCD_D1
 764                                                 MX28_PAD_LCD_D02__LCD_D2
 765                                                 MX28_PAD_LCD_D03__LCD_D3
 766                                                 MX28_PAD_LCD_D04__LCD_D4
 767                                                 MX28_PAD_LCD_D05__LCD_D5
 768                                                 MX28_PAD_LCD_D06__LCD_D6
 769                                                 MX28_PAD_LCD_D07__LCD_D7
 770                                                 MX28_PAD_LCD_D08__LCD_D8
 771                                                 MX28_PAD_LCD_D09__LCD_D9
 772                                                 MX28_PAD_LCD_D10__LCD_D10
 773                                                 MX28_PAD_LCD_D11__LCD_D11
 774                                                 MX28_PAD_LCD_D12__LCD_D12
 775                                                 MX28_PAD_LCD_D13__LCD_D13
 776                                                 MX28_PAD_LCD_D14__LCD_D14
 777                                                 MX28_PAD_LCD_D15__LCD_D15
 778                                                 MX28_PAD_LCD_D16__LCD_D16
 779                                                 MX28_PAD_LCD_D17__LCD_D17
 780                                         >;
 781                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 782                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 783                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 784                                 };
 785
 786                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
 787                                         reg = <0>;
 788                                         fsl,pinmux-ids = <
 789                                                 MX28_PAD_LCD_D00__LCD_D0
 790                                                 MX28_PAD_LCD_D01__LCD_D1
 791                                                 MX28_PAD_LCD_D02__LCD_D2
 792                                                 MX28_PAD_LCD_D03__LCD_D3
 793                                                 MX28_PAD_LCD_D04__LCD_D4
 794                                                 MX28_PAD_LCD_D05__LCD_D5
 795                                                 MX28_PAD_LCD_D06__LCD_D6
 796                                                 MX28_PAD_LCD_D07__LCD_D7
 797                                                 MX28_PAD_LCD_D08__LCD_D8
 798                                                 MX28_PAD_LCD_D09__LCD_D9
 799                                                 MX28_PAD_LCD_D10__LCD_D10
 800                                                 MX28_PAD_LCD_D11__LCD_D11
 801                                                 MX28_PAD_LCD_D12__LCD_D12
 802                                                 MX28_PAD_LCD_D13__LCD_D13
 803                                                 MX28_PAD_LCD_D14__LCD_D14
 804                                                 MX28_PAD_LCD_D15__LCD_D15
 805                                         >;
 806                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 807                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 808                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 809                                 };
 810
 811                                 lcdif_sync_pins_a: lcdif-sync@0 {
 812                                         reg = <0>;
 813                                         fsl,pinmux-ids = <
 814                                                 MX28_PAD_LCD_RS__LCD_DOTCLK
 815                                                 MX28_PAD_LCD_CS__LCD_ENABLE
 816                                                 MX28_PAD_LCD_RD_E__LCD_VSYNC
 817                                                 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 818                                         >;
 819                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 820                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 821                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 822                                 };
 823
 824                                 can0_pins_a: can0@0 {
 825                                         reg = <0>;
 826                                         fsl,pinmux-ids = <
 827                                                 MX28_PAD_GPMI_RDY2__CAN0_TX
 828                                                 MX28_PAD_GPMI_RDY3__CAN0_RX
 829                                         >;
 830                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 831                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 832                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 833                                 };
 834
 835                                 can1_pins_a: can1@0 {
 836                                         reg = <0>;
 837                                         fsl,pinmux-ids = <
 838                                                 MX28_PAD_GPMI_CE2N__CAN1_TX
 839                                                 MX28_PAD_GPMI_CE3N__CAN1_RX
 840                                         >;
 841                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 842                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 843                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 844                                 };
 845
 846                                 spi2_pins_a: spi2@0 {
 847                                         reg = <0>;
 848                                         fsl,pinmux-ids = <
 849                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
 850                                                 MX28_PAD_SSP2_MOSI__SSP2_CMD
 851                                                 MX28_PAD_SSP2_MISO__SSP2_D0
 852                                                 MX28_PAD_SSP2_SS0__SSP2_D3
 853                                         >;
 854                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 855                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 856                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 857                                 };
 858
 859                                 spi3_pins_a: spi3@0 {
 860                                         reg = <0>;
 861                                         fsl,pinmux-ids = <
 862                                                 MX28_PAD_AUART2_RX__SSP3_D4
 863                                                 MX28_PAD_AUART2_TX__SSP3_D5
 864                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 865                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 866                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 867                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 868                                         >;
 869                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 870                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 871                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 872                                 };
 873
 874                                 spi3_pins_b: spi3@1 {
 875                                         reg = <1>;
 876                                         fsl,pinmux-ids = <
 877                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 878                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 879                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 880                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 881                                         >;
 882                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 883                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 884                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 885                                 };
 886
 887                                 usb0_pins_a: usb0@0 {
 888                                         reg = <0>;
 889                                         fsl,pinmux-ids = <
 890                                                 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 891                                         >;
 892                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 893                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 894                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 895                                 };
 896
 897                                 usb0_pins_b: usb0@1 {
 898                                         reg = <1>;
 899                                         fsl,pinmux-ids = <
 900                                                 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 901                                         >;
 902                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 903                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 904                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 905                                 };
 906
 907                                 usb1_pins_a: usb1@0 {
 908                                         reg = <0>;
 909                                         fsl,pinmux-ids = <
 910                                                 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 911                                         >;
 912                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 913                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 914                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 915                                 };
 916
 917                                 usb0_id_pins_a: usb0id@0 {
 918                                         reg = <0>;
 919                                         fsl,pinmux-ids = <
 920                                                 MX28_PAD_AUART1_RTS__USB0_ID
 921                                         >;
 922                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 923                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 924                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 925                                 };
 926
 927                                 usb0_id_pins_b: usb0id1@0 {
 928                                         reg = <0>;
 929                                         fsl,pinmux-ids = <
 930                                                 MX28_PAD_PWM2__USB0_ID
 931                                         >;
 932                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 933                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 934                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 935                                 };
 936
 937                         };
 938
 939                         digctl: digctl@8001c000 {
 940                                 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 941                                 reg = <0x8001c000 0x2000>;
 942                                 interrupts = <89>;
 943                                 status = "disabled";
 944                         };
 945
 946                         etm: etm@80022000 {
 947                                 reg = <0x80022000 0x2000>;
 948                                 status = "disabled";
 949                         };
 950
 951                         dma_apbx: dma-apbx@80024000 {
 952                                 compatible = "fsl,imx28-dma-apbx";
 953                                 reg = <0x80024000 0x2000>;
 954                                 interrupts = <78 79 66 0
 955                                               80 81 68 69
 956                                               70 71 72 73
 957                                               74 75 76 77>;
 958                                 interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 959                                                   "saif0", "saif1", "i2c0", "i2c1",
 960                                                   "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 961                                                   "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 962                                 #dma-cells = <1>;
 963                                 dma-channels = <16>;
 964                                 clocks = <&clks 26>;
 965                         };
 966
 967                         dcp: dcp@80028000 {
 968                                 compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
 969                                 reg = <0x80028000 0x2000>;
 970                                 interrupts = <52 53 54>;
 971                                 status = "okay";
 972                         };
 973
 974                         pxp: pxp@8002a000 {
 975                                 reg = <0x8002a000 0x2000>;
 976                                 interrupts = <39>;
 977                                 status = "disabled";
 978                         };
 979
 980                         ocotp: ocotp@8002c000 {
 981                                 compatible = "fsl,imx28-ocotp", "fsl,ocotp";
 982                                 #address-cells = <1>;
 983                                 #size-cells = <1>;
 984                                 reg = <0x8002c000 0x2000>;
 985                                 clocks = <&clks 25>;
 986                         };
 987
 988                         axi-ahb@8002e000 {
 989                                 reg = <0x8002e000 0x2000>;
 990                                 status = "disabled";
 991                         };
 992
 993                         lcdif: lcdif@80030000 {
 994                                 compatible = "fsl,imx28-lcdif";
 995                                 reg = <0x80030000 0x2000>;
 996                                 interrupts = <38>;
 997                                 clocks = <&clks 55>;
 998                                 dmas = <&dma_apbh 13>;
 999                                 dma-names = "rx";
1000                                 status = "disabled";
1001                         };
1002
1003                         can0: can@80032000 {
1004                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
1005                                 reg = <0x80032000 0x2000>;
1006                                 interrupts = <8>;
1007                                 clocks = <&clks 58>, <&clks 58>;
1008                                 clock-names = "ipg", "per";
1009                                 status = "disabled";
1010                         };
1011
1012                         can1: can@80034000 {
1013                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
1014                                 reg = <0x80034000 0x2000>;
1015                                 interrupts = <9>;
1016                                 clocks = <&clks 59>, <&clks 59>;
1017                                 clock-names = "ipg", "per";
1018                                 status = "disabled";
1019                         };
1020
1021                         simdbg: simdbg@8003c000 {
1022                                 reg = <0x8003c000 0x200>;
1023                                 status = "disabled";
1024                         };
1025
1026                         simgpmisel: simgpmisel@8003c200 {
1027                                 reg = <0x8003c200 0x100>;
1028                                 status = "disabled";
1029                         };
1030
1031                         simsspsel: simsspsel@8003c300 {
1032                                 reg = <0x8003c300 0x100>;
1033                                 status = "disabled";
1034                         };
1035
1036                         simmemsel: simmemsel@8003c400 {
1037                                 reg = <0x8003c400 0x100>;
1038                                 status = "disabled";
1039                         };
1040
1041                         gpiomon: gpiomon@8003c500 {
1042                                 reg = <0x8003c500 0x100>;
1043                                 status = "disabled";
1044                         };
1045
1046                         simenet: simenet@8003c700 {
1047                                 reg = <0x8003c700 0x100>;
1048                                 status = "disabled";
1049                         };
1050
1051                         armjtag: armjtag@8003c800 {
1052                                 reg = <0x8003c800 0x100>;
1053                                 status = "disabled";
1054                         };
1055                 };
1056
1057                 apbx@80040000 {
1058                         compatible = "simple-bus";
1059                         #address-cells = <1>;
1060                         #size-cells = <1>;
1061                         reg = <0x80040000 0x40000>;
1062                         ranges;
1063
1064                         clks: clkctrl@80040000 {
1065                                 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
1066                                 reg = <0x80040000 0x2000>;
1067                                 #clock-cells = <1>;
1068                         };
1069
1070                         saif0: saif@80042000 {
1071                                 compatible = "fsl,imx28-saif";
1072                                 reg = <0x80042000 0x2000>;
1073                                 interrupts = <59>;
1074                                 #clock-cells = <0>;
1075                                 clocks = <&clks 53>;
1076                                 dmas = <&dma_apbx 4>;
1077                                 dma-names = "rx-tx";
1078                                 status = "disabled";
1079                         };
1080
1081                         power: power@80044000 {
1082                                 reg = <0x80044000 0x2000>;
1083                                 status = "disabled";
1084                         };
1085
1086                         saif1: saif@80046000 {
1087                                 compatible = "fsl,imx28-saif";
1088                                 reg = <0x80046000 0x2000>;
1089                                 interrupts = <58>;
1090                                 clocks = <&clks 54>;
1091                                 dmas = <&dma_apbx 5>;
1092                                 dma-names = "rx-tx";
1093                                 status = "disabled";
1094                         };
1095
1096                         lradc: lradc@80050000 {
1097                                 compatible = "fsl,imx28-lradc";
1098                                 reg = <0x80050000 0x2000>;
1099                                 interrupts = <10 14 15 16 17 18 19
1100                                                 20 21 22 23 24 25>;
1101                                 status = "disabled";
1102                                 clocks = <&clks 41>;
1103                                 #io-channel-cells = <1>;
1104                         };
1105
1106                         spdif: spdif@80054000 {
1107                                 reg = <0x80054000 0x2000>;
1108                                 interrupts = <45>;
1109                                 dmas = <&dma_apbx 2>;
1110                                 dma-names = "tx";
1111                                 status = "disabled";
1112                         };
1113
1114                         mxs_rtc: rtc@80056000 {
1115                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1116                                 reg = <0x80056000 0x2000>;
1117                                 interrupts = <29>;
1118                         };
1119
1120                         i2c0: i2c@80058000 {
1121                                 #address-cells = <1>;
1122                                 #size-cells = <0>;
1123                                 compatible = "fsl,imx28-i2c";
1124                                 reg = <0x80058000 0x2000>;
1125                                 interrupts = <111>;
1126                                 clock-frequency = <100000>;
1127                                 dmas = <&dma_apbx 6>;
1128                                 dma-names = "rx-tx";
1129                                 status = "disabled";
1130                         };
1131
1132                         i2c1: i2c@8005a000 {
1133                                 #address-cells = <1>;
1134                                 #size-cells = <0>;
1135                                 compatible = "fsl,imx28-i2c";
1136                                 reg = <0x8005a000 0x2000>;
1137                                 interrupts = <110>;
1138                                 clock-frequency = <100000>;
1139                                 dmas = <&dma_apbx 7>;
1140                                 dma-names = "rx-tx";
1141                                 status = "disabled";
1142                         };
1143
1144                         pwm: pwm@80064000 {
1145                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1146                                 reg = <0x80064000 0x2000>;
1147                                 clocks = <&clks 44>;
1148                                 #pwm-cells = <2>;
1149                                 fsl,pwm-number = <8>;
1150                                 status = "disabled";
1151                         };
1152
1153                         timer: timrot@80068000 {
1154                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
1155                                 reg = <0x80068000 0x2000>;
1156                                 interrupts = <48 49 50 51>;
1157                                 clocks = <&clks 26>;
1158                         };
1159
1160                         auart0: serial@8006a000 {
1161                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1162                                 reg = <0x8006a000 0x2000>;
1163                                 interrupts = <112>;
1164                                 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1165                                 dma-names = "rx", "tx";
1166                                 clocks = <&clks 45>;
1167                                 status = "disabled";
1168                         };
1169
1170                         auart1: serial@8006c000 {
1171                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1172                                 reg = <0x8006c000 0x2000>;
1173                                 interrupts = <113>;
1174                                 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1175                                 dma-names = "rx", "tx";
1176                                 clocks = <&clks 45>;
1177                                 status = "disabled";
1178                         };
1179
1180                         auart2: serial@8006e000 {
1181                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1182                                 reg = <0x8006e000 0x2000>;
1183                                 interrupts = <114>;
1184                                 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1185                                 dma-names = "rx", "tx";
1186                                 clocks = <&clks 45>;
1187                                 status = "disabled";
1188                         };
1189
1190                         auart3: serial@80070000 {
1191                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1192                                 reg = <0x80070000 0x2000>;
1193                                 interrupts = <115>;
1194                                 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1195                                 dma-names = "rx", "tx";
1196                                 clocks = <&clks 45>;
1197                                 status = "disabled";
1198                         };
1199
1200                         auart4: serial@80072000 {
1201                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1202                                 reg = <0x80072000 0x2000>;
1203                                 interrupts = <116>;
1204                                 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1205                                 dma-names = "rx", "tx";
1206                                 clocks = <&clks 45>;
1207                                 status = "disabled";
1208                         };
1209
1210                         duart: serial@80074000 {
1211                                 compatible = "arm,pl011", "arm,primecell";
1212                                 reg = <0x80074000 0x1000>;
1213                                 interrupts = <47>;
1214                                 clocks = <&clks 45>, <&clks 26>;
1215                                 clock-names = "uart", "apb_pclk";
1216                                 status = "disabled";
1217                         };
1218
1219                         usbphy0: usbphy@8007c000 {
1220                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1221                                 reg = <0x8007c000 0x2000>;
1222                                 clocks = <&clks 62>;
1223                                 status = "disabled";
1224                         };
1225
1226                         usbphy1: usbphy@8007e000 {
1227                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1228                                 reg = <0x8007e000 0x2000>;
1229                                 clocks = <&clks 63>;
1230                                 status = "disabled";
1231                         };
1232                 };
1233         };
1234
1235         ahb@80080000 {
1236                 compatible = "simple-bus";
1237                 #address-cells = <1>;
1238                 #size-cells = <1>;
1239                 reg = <0x80080000 0x80000>;
1240                 ranges;
1241
1242                 usb0: usb@80080000 {
1243                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1244                         reg = <0x80080000 0x10000>;
1245                         interrupts = <93>;
1246                         clocks = <&clks 60>;
1247                         fsl,usbphy = <&usbphy0>;
1248                         status = "disabled";
1249                 };
1250
1251                 usb1: usb@80090000 {
1252                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1253                         reg = <0x80090000 0x10000>;
1254                         interrupts = <92>;
1255                         clocks = <&clks 61>;
1256                         fsl,usbphy = <&usbphy1>;
1257                         dr_mode = "host";
1258                         status = "disabled";
1259                 };
1260
1261                 dflpt: dflpt@800c0000 {
1262                         reg = <0x800c0000 0x10000>;
1263                         status = "disabled";
1264                 };
1265
1266                 mac0: ethernet@800f0000 {
1267                         compatible = "fsl,imx28-fec";
1268                         reg = <0x800f0000 0x4000>;
1269                         interrupts = <101>;
1270                         clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1271                         clock-names = "ipg", "ahb", "enet_out";
1272                         status = "disabled";
1273                 };
1274
1275                 mac1: ethernet@800f4000 {
1276                         compatible = "fsl,imx28-fec";
1277                         reg = <0x800f4000 0x4000>;
1278                         interrupts = <102>;
1279                         clocks = <&clks 57>, <&clks 57>;
1280                         clock-names = "ipg", "ahb";
1281                         status = "disabled";
1282                 };
1283
1284                 etn_switch: switch@800f8000 {
1285                         reg = <0x800f8000 0x8000>;
1286                         status = "disabled";
1287                 };
1288         };
1289
1290         iio-hwmon {
1291                 compatible = "iio-hwmon";
1292                 io-channels = <&lradc 8>;
1293         };
1294 };