arch/arm/boot/dts/ls1021a.dtsi

   1 /*
   2  * Copyright 2013-2014 Freescale Semiconductor, Inc.
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of
  12  *     the License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  *     You should have received a copy of the GNU General Public
  20  *     License along with this file; if not, write to the Free
  21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22  *     MA 02110-1301 USA
  23  *
  24  * Or, alternatively,
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use,
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 #include "skeleton64.dtsi"
  49 #include <dt-bindings/interrupt-controller/arm-gic.h>
  50
  51 / {
  52         compatible = "fsl,ls1021a";
  53         interrupt-parent = <&gic>;
  54
  55         aliases {
  56                 crypto = &crypto;
  57                 ethernet0 = &enet0;
  58                 ethernet1 = &enet1;
  59                 ethernet2 = &enet2;
  60                 serial0 = &lpuart0;
  61                 serial1 = &lpuart1;
  62                 serial2 = &lpuart2;
  63                 serial3 = &lpuart3;
  64                 serial4 = &lpuart4;
  65                 serial5 = &lpuart5;
  66                 sysclk = &sysclk;
  67         };
  68
  69         cpus {
  70                 #address-cells = <1>;
  71                 #size-cells = <0>;
  72
  73                 cpu@f00 {
  74                         compatible = "arm,cortex-a7";
  75                         device_type = "cpu";
  76                         reg = <0xf00>;
  77                         clocks = <&cluster1_clk>;
  78                 };
  79
  80                 cpu@f01 {
  81                         compatible = "arm,cortex-a7";
  82                         device_type = "cpu";
  83                         reg = <0xf01>;
  84                         clocks = <&cluster1_clk>;
  85                 };
  86         };
  87
  88         timer {
  89                 compatible = "arm,armv7-timer";
  90                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  91                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  92                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  93                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
  94         };
  95
  96         pmu {
  97                 compatible = "arm,cortex-a7-pmu";
  98                 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
  99                              <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 100         };
 101
 102         soc {
 103                 compatible = "simple-bus";
 104                 #address-cells = <2>;
 105                 #size-cells = <2>;
 106                 device_type = "soc";
 107                 interrupt-parent = <&gic>;
 108                 ranges;
 109
 110                 gic: interrupt-controller@1400000 {
 111                         compatible = "arm,cortex-a7-gic";
 112                         #interrupt-cells = <3>;
 113                         interrupt-controller;
 114                         reg = <0x0 0x1401000 0x0 0x1000>,
 115                               <0x0 0x1402000 0x0 0x1000>,
 116                               <0x0 0x1404000 0x0 0x2000>,
 117                               <0x0 0x1406000 0x0 0x2000>;
 118                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 119
 120                 };
 121
 122                 msi1: msi-controller@1570e00 {
 123                         compatible = "fsl,1s1021a-msi";
 124                         reg = <0x0 0x1570e00 0x0 0x8>;
 125                         msi-controller;
 126                         interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 127                 };
 128
 129                 msi2: msi-controller@1570e08 {
 130                         compatible = "fsl,1s1021a-msi";
 131                         reg = <0x0 0x1570e08 0x0 0x8>;
 132                         msi-controller;
 133                         interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 134                 };
 135
 136                 ifc: ifc@1530000 {
 137                         compatible = "fsl,ifc", "simple-bus";
 138                         reg = <0x0 0x1530000 0x0 0x10000>;
 139                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 140                 };
 141
 142                 dcfg: dcfg@1ee0000 {
 143                         compatible = "fsl,ls1021a-dcfg", "syscon";
 144                         reg = <0x0 0x1ee0000 0x0 0x10000>;
 145                         big-endian;
 146                 };
 147
 148                 esdhc: esdhc@1560000 {
 149                         compatible = "fsl,esdhc";
 150                         reg = <0x0 0x1560000 0x0 0x10000>;
 151                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 152                         clock-frequency = <0>;
 153                         voltage-ranges = <1800 1800 3300 3300>;
 154                         sdhci,auto-cmd12;
 155                         big-endian;
 156                         bus-width = <4>;
 157                         status = "disabled";
 158                 };
 159
 160                 sata: sata@3200000 {
 161                         compatible = "fsl,ls1021a-ahci";
 162                         reg = <0x0 0x3200000 0x0 0x10000>,
 163                               <0x0 0x20220520 0x0 0x4>;
 164                         reg-names = "ahci", "sata-ecc";
 165                         interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 166                         clocks = <&platform_clk 1>;
 167                         dma-coherent;
 168                         status = "disabled";
 169                 };
 170
 171                 scfg: scfg@1570000 {
 172                         compatible = "fsl,ls1021a-scfg", "syscon";
 173                         reg = <0x0 0x1570000 0x0 0x10000>;
 174                         big-endian;
 175                 };
 176
 177                 crypto: crypto@1700000 {
 178                         compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
 179                         fsl,sec-era = <7>;
 180                         #address-cells = <1>;
 181                         #size-cells = <1>;
 182                         reg              = <0x0 0x1700000 0x0 0x100000>;
 183                         ranges           = <0x0 0x0 0x1700000 0x100000>;
 184                         interrupts       = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 185
 186                         sec_jr0: jr@10000 {
 187                                 compatible = "fsl,sec-v5.0-job-ring",
 188                                      "fsl,sec-v4.0-job-ring";
 189                                 reg = <0x10000 0x10000>;
 190                                 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 191                         };
 192
 193                         sec_jr1: jr@20000 {
 194                                 compatible = "fsl,sec-v5.0-job-ring",
 195                                      "fsl,sec-v4.0-job-ring";
 196                                 reg = <0x20000 0x10000>;
 197                                 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 198                         };
 199
 200                         sec_jr2: jr@30000 {
 201                                 compatible = "fsl,sec-v5.0-job-ring",
 202                                      "fsl,sec-v4.0-job-ring";
 203                                 reg = <0x30000 0x10000>;
 204                                 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 205                         };
 206
 207                         sec_jr3: jr@40000 {
 208                                 compatible = "fsl,sec-v5.0-job-ring",
 209                                      "fsl,sec-v4.0-job-ring";
 210                                 reg = <0x40000 0x10000>;
 211                                 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 212                         };
 213
 214                 };
 215
 216                 clockgen: clocking@1ee1000 {
 217                         #address-cells = <1>;
 218                         #size-cells = <1>;
 219                         ranges = <0x0 0x0 0x1ee1000 0x10000>;
 220
 221                         sysclk: sysclk {
 222                                 compatible = "fixed-clock";
 223                                 #clock-cells = <0>;
 224                                 clock-output-names = "sysclk";
 225                         };
 226
 227                         cga_pll1: pll@800 {
 228                                 compatible = "fsl,qoriq-core-pll-2.0";
 229                                 #clock-cells = <1>;
 230                                 reg = <0x800 0x10>;
 231                                 clocks = <&sysclk>;
 232                                 clock-output-names = "cga-pll1", "cga-pll1-div2",
 233                                                      "cga-pll1-div4";
 234                         };
 235
 236                         platform_clk: pll@c00 {
 237                                 compatible = "fsl,qoriq-core-pll-2.0";
 238                                 #clock-cells = <1>;
 239                                 reg = <0xc00 0x10>;
 240                                 clocks = <&sysclk>;
 241                                 clock-output-names = "platform-clk", "platform-clk-div2";
 242                         };
 243
 244                         cluster1_clk: clk0c0@0 {
 245                                 compatible = "fsl,qoriq-core-mux-2.0";
 246                                 #clock-cells = <0>;
 247                                 reg = <0x0 0x10>;
 248                                 clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4";
 249                                 clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>;
 250                                 clock-output-names = "cluster1-clk";
 251                         };
 252                 };
 253
 254                 dspi0: dspi@2100000 {
 255                         compatible = "fsl,ls1021a-v1.0-dspi";
 256                         #address-cells = <1>;
 257                         #size-cells = <0>;
 258                         reg = <0x0 0x2100000 0x0 0x10000>;
 259                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 260                         clock-names = "dspi";
 261                         clocks = <&platform_clk 1>;
 262                         spi-num-chipselects = <6>;
 263                         big-endian;
 264                         status = "disabled";
 265                 };
 266
 267                 dspi1: dspi@2110000 {
 268                         compatible = "fsl,ls1021a-v1.0-dspi";
 269                         #address-cells = <1>;
 270                         #size-cells = <0>;
 271                         reg = <0x0 0x2110000 0x0 0x10000>;
 272                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 273                         clock-names = "dspi";
 274                         clocks = <&platform_clk 1>;
 275                         spi-num-chipselects = <6>;
 276                         big-endian;
 277                         status = "disabled";
 278                 };
 279
 280                 i2c0: i2c@2180000 {
 281                         compatible = "fsl,vf610-i2c";
 282                         #address-cells = <1>;
 283                         #size-cells = <0>;
 284                         reg = <0x0 0x2180000 0x0 0x10000>;
 285                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 286                         clock-names = "i2c";
 287                         clocks = <&platform_clk 1>;
 288                         status = "disabled";
 289                 };
 290
 291                 i2c1: i2c@2190000 {
 292                         compatible = "fsl,vf610-i2c";
 293                         #address-cells = <1>;
 294                         #size-cells = <0>;
 295                         reg = <0x0 0x2190000 0x0 0x10000>;
 296                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 297                         clock-names = "i2c";
 298                         clocks = <&platform_clk 1>;
 299                         status = "disabled";
 300                 };
 301
 302                 i2c2: i2c@21a0000 {
 303                         compatible = "fsl,vf610-i2c";
 304                         #address-cells = <1>;
 305                         #size-cells = <0>;
 306                         reg = <0x0 0x21a0000 0x0 0x10000>;
 307                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 308                         clock-names = "i2c";
 309                         clocks = <&platform_clk 1>;
 310                         status = "disabled";
 311                 };
 312
 313                 uart0: serial@21c0500 {
 314                         compatible = "fsl,16550-FIFO64", "ns16550a";
 315                         reg = <0x0 0x21c0500 0x0 0x100>;
 316                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 317                         clock-frequency = <0>;
 318                         fifo-size = <15>;
 319                         status = "disabled";
 320                 };
 321
 322                 uart1: serial@21c0600 {
 323                         compatible = "fsl,16550-FIFO64", "ns16550a";
 324                         reg = <0x0 0x21c0600 0x0 0x100>;
 325                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 326                         clock-frequency = <0>;
 327                         fifo-size = <15>;
 328                         status = "disabled";
 329                 };
 330
 331                 uart2: serial@21d0500 {
 332                         compatible = "fsl,16550-FIFO64", "ns16550a";
 333                         reg = <0x0 0x21d0500 0x0 0x100>;
 334                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 335                         clock-frequency = <0>;
 336                         fifo-size = <15>;
 337                         status = "disabled";
 338                 };
 339
 340                 uart3: serial@21d0600 {
 341                         compatible = "fsl,16550-FIFO64", "ns16550a";
 342                         reg = <0x0 0x21d0600 0x0 0x100>;
 343                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 344                         clock-frequency = <0>;
 345                         fifo-size = <15>;
 346                         status = "disabled";
 347                 };
 348
 349                 gpio0: gpio@2300000 {
 350                         compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 351                         reg = <0x0 0x2300000 0x0 0x10000>;
 352                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 353                         gpio-controller;
 354                         #gpio-cells = <2>;
 355                         interrupt-controller;
 356                         #interrupt-cells = <2>;
 357                 };
 358
 359                 gpio1: gpio@2310000 {
 360                         compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 361                         reg = <0x0 0x2310000 0x0 0x10000>;
 362                         interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 363                         gpio-controller;
 364                         #gpio-cells = <2>;
 365                         interrupt-controller;
 366                         #interrupt-cells = <2>;
 367                 };
 368
 369                 gpio2: gpio@2320000 {
 370                         compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 371                         reg = <0x0 0x2320000 0x0 0x10000>;
 372                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 373                         gpio-controller;
 374                         #gpio-cells = <2>;
 375                         interrupt-controller;
 376                         #interrupt-cells = <2>;
 377                 };
 378
 379                 gpio3: gpio@2330000 {
 380                         compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 381                         reg = <0x0 0x2330000 0x0 0x10000>;
 382                         interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 383                         gpio-controller;
 384                         #gpio-cells = <2>;
 385                         interrupt-controller;
 386                         #interrupt-cells = <2>;
 387                 };
 388
 389                 lpuart0: serial@2950000 {
 390                         compatible = "fsl,ls1021a-lpuart";
 391                         reg = <0x0 0x2950000 0x0 0x1000>;
 392                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 393                         clocks = <&sysclk>;
 394                         clock-names = "ipg";
 395                         status = "disabled";
 396                 };
 397
 398                 lpuart1: serial@2960000 {
 399                         compatible = "fsl,ls1021a-lpuart";
 400                         reg = <0x0 0x2960000 0x0 0x1000>;
 401                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 402                         clocks = <&platform_clk 1>;
 403                         clock-names = "ipg";
 404                         status = "disabled";
 405                 };
 406
 407                 lpuart2: serial@2970000 {
 408                         compatible = "fsl,ls1021a-lpuart";
 409                         reg = <0x0 0x2970000 0x0 0x1000>;
 410                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 411                         clocks = <&platform_clk 1>;
 412                         clock-names = "ipg";
 413                         status = "disabled";
 414                 };
 415
 416                 lpuart3: serial@2980000 {
 417                         compatible = "fsl,ls1021a-lpuart";
 418                         reg = <0x0 0x2980000 0x0 0x1000>;
 419                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 420                         clocks = <&platform_clk 1>;
 421                         clock-names = "ipg";
 422                         status = "disabled";
 423                 };
 424
 425                 lpuart4: serial@2990000 {
 426                         compatible = "fsl,ls1021a-lpuart";
 427                         reg = <0x0 0x2990000 0x0 0x1000>;
 428                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 429                         clocks = <&platform_clk 1>;
 430                         clock-names = "ipg";
 431                         status = "disabled";
 432                 };
 433
 434                 lpuart5: serial@29a0000 {
 435                         compatible = "fsl,ls1021a-lpuart";
 436                         reg = <0x0 0x29a0000 0x0 0x1000>;
 437                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 438                         clocks = <&platform_clk 1>;
 439                         clock-names = "ipg";
 440                         status = "disabled";
 441                 };
 442
 443                 wdog0: watchdog@2ad0000 {
 444                         compatible = "fsl,imx21-wdt";
 445                         reg = <0x0 0x2ad0000 0x0 0x10000>;
 446                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 447                         clocks = <&platform_clk 1>;
 448                         clock-names = "wdog-en";
 449                         big-endian;
 450                 };
 451
 452                 sai1: sai@2b50000 {
 453                         #sound-dai-cells = <0>;
 454                         compatible = "fsl,vf610-sai";
 455                         reg = <0x0 0x2b50000 0x0 0x10000>;
 456                         interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 457                         clocks = <&platform_clk 1>, <&platform_clk 1>,
 458                                  <&platform_clk 1>, <&platform_clk 1>;
 459                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 460                         dma-names = "tx", "rx";
 461                         dmas = <&edma0 1 47>,
 462                                <&edma0 1 46>;
 463                         status = "disabled";
 464                 };
 465
 466                 sai2: sai@2b60000 {
 467                         #sound-dai-cells = <0>;
 468                         compatible = "fsl,vf610-sai";
 469                         reg = <0x0 0x2b60000 0x0 0x10000>;
 470                         interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 471                         clocks = <&platform_clk 1>, <&platform_clk 1>,
 472                                  <&platform_clk 1>, <&platform_clk 1>;
 473                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 474                         dma-names = "tx", "rx";
 475                         dmas = <&edma0 1 45>,
 476                                <&edma0 1 44>;
 477                         status = "disabled";
 478                 };
 479
 480                 edma0: edma@2c00000 {
 481                         #dma-cells = <2>;
 482                         compatible = "fsl,vf610-edma";
 483                         reg = <0x0 0x2c00000 0x0 0x10000>,
 484                               <0x0 0x2c10000 0x0 0x10000>,
 485                               <0x0 0x2c20000 0x0 0x10000>;
 486                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
 487                                      <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 488                         interrupt-names = "edma-tx", "edma-err";
 489                         dma-channels = <32>;
 490                         big-endian;
 491                         clock-names = "dmamux0", "dmamux1";
 492                         clocks = <&platform_clk 1>,
 493                                  <&platform_clk 1>;
 494                 };
 495
 496                 dcu: dcu@2ce0000 {
 497                         compatible = "fsl,ls1021a-dcu";
 498                         reg = <0x0 0x2ce0000 0x0 0x10000>;
 499                         interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
 500                         clocks = <&platform_clk 0>,
 501                                 <&platform_clk 0>;
 502                         clock-names = "dcu", "pix";
 503                         big-endian;
 504                         status = "disabled";
 505                 };
 506
 507                 mdio0: mdio@2d24000 {
 508                         compatible = "gianfar";
 509                         device_type = "mdio";
 510                         #address-cells = <1>;
 511                         #size-cells = <0>;
 512                         reg = <0x0 0x2d24000 0x0 0x4000>;
 513                 };
 514
 515                 ptp_clock@2d10e00 {
 516                         compatible = "fsl,etsec-ptp";
 517                         reg = <0x0 0x2d10e00 0x0 0xb0>;
 518                         interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 519                         fsl,tclk-period = <5>;
 520                         fsl,tmr-prsc    = <2>;
 521                         fsl,tmr-add     = <0xaaaaaaab>;
 522                         fsl,tmr-fiper1  = <999999990>;
 523                         fsl,tmr-fiper2  = <99990>;
 524                         fsl,max-adj     = <499999999>;
 525                 };
 526
 527                 enet0: ethernet@2d10000 {
 528                         compatible = "fsl,etsec2";
 529                         device_type = "network";
 530                         #address-cells = <2>;
 531                         #size-cells = <2>;
 532                         interrupt-parent = <&gic>;
 533                         model = "eTSEC";
 534                         fsl,magic-packet;
 535                         ranges;
 536                         dma-coherent;
 537
 538                         queue-group@2d10000 {
 539                                 #address-cells = <2>;
 540                                 #size-cells = <2>;
 541                                 reg = <0x0 0x2d10000 0x0 0x1000>;
 542                                 interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
 543                                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 544                                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 545                         };
 546
 547                         queue-group@2d14000  {
 548                                 #address-cells = <2>;
 549                                 #size-cells = <2>;
 550                                 reg = <0x0 0x2d14000 0x0 0x1000>;
 551                                 interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 552                                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
 553                                         <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 554                         };
 555                 };
 556
 557                 enet1: ethernet@2d50000 {
 558                         compatible = "fsl,etsec2";
 559                         device_type = "network";
 560                         #address-cells = <2>;
 561                         #size-cells = <2>;
 562                         interrupt-parent = <&gic>;
 563                         model = "eTSEC";
 564                         ranges;
 565                         dma-coherent;
 566
 567                         queue-group@2d50000  {
 568                                 #address-cells = <2>;
 569                                 #size-cells = <2>;
 570                                 reg = <0x0 0x2d50000 0x0 0x1000>;
 571                                 interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 572                                         <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
 573                                         <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 574                         };
 575
 576                         queue-group@2d54000  {
 577                                 #address-cells = <2>;
 578                                 #size-cells = <2>;
 579                                 reg = <0x0 0x2d54000 0x0 0x1000>;
 580                                 interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 581                                         <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
 582                                         <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 583                         };
 584                 };
 585
 586                 enet2: ethernet@2d90000 {
 587                         compatible = "fsl,etsec2";
 588                         device_type = "network";
 589                         #address-cells = <2>;
 590                         #size-cells = <2>;
 591                         interrupt-parent = <&gic>;
 592                         model = "eTSEC";
 593                         ranges;
 594                         dma-coherent;
 595
 596                         queue-group@2d90000  {
 597                                 #address-cells = <2>;
 598                                 #size-cells = <2>;
 599                                 reg = <0x0 0x2d90000 0x0 0x1000>;
 600                                 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
 601                                         <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
 602                                         <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 603                         };
 604
 605                         queue-group@2d94000  {
 606                                 #address-cells = <2>;
 607                                 #size-cells = <2>;
 608                                 reg = <0x0 0x2d94000 0x0 0x1000>;
 609                                 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 610                                         <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
 611                                         <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 612                         };
 613                 };
 614
 615                 usb@8600000 {
 616                         compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 617                         reg = <0x0 0x8600000 0x0 0x1000>;
 618                         interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 619                         dr_mode = "host";
 620                         phy_type = "ulpi";
 621                 };
 622
 623                 usb3@3100000 {
 624                         compatible = "snps,dwc3";
 625                         reg = <0x0 0x3100000 0x0 0x10000>;
 626                         interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 627                         dr_mode = "host";
 628                         snps,quirk-frame-length-adjustment = <0x20>;
 629                         snps,dis_rxdet_inp3_quirk;
 630                 };
 631
 632                 pcie@3400000 {
 633                         compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
 634                         reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
 635                                0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 636                         reg-names = "regs", "config";
 637                         interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
 638                         fsl,pcie-scfg = <&scfg 0>;
 639                         #address-cells = <3>;
 640                         #size-cells = <2>;
 641                         device_type = "pci";
 642                         num-lanes = <4>;
 643                         bus-range = <0x0 0xff>;
 644                         ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
 645                                   0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 646                         msi-parent = <&msi1>;
 647                         #interrupt-cells = <1>;
 648                         interrupt-map-mask = <0 0 0 7>;
 649                         interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
 650                                         <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
 651                                         <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
 652                                         <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 653                 };
 654
 655                 pcie@3500000 {
 656                         compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
 657                         reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
 658                                0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 659                         reg-names = "regs", "config";
 660                         interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 661                         fsl,pcie-scfg = <&scfg 1>;
 662                         #address-cells = <3>;
 663                         #size-cells = <2>;
 664                         device_type = "pci";
 665                         num-lanes = <4>;
 666                         bus-range = <0x0 0xff>;
 667                         ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
 668                                   0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 669                         msi-parent = <&msi2>;
 670                         #interrupt-cells = <1>;
 671                         interrupt-map-mask = <0 0 0 7>;
 672                         interrupt-map = <0000 0 0 1 &gic GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
 673                                         <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
 674                                         <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
 675                                         <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 676                 };
 677         };
 678 };