arch/arm/boot/dts/omap3-n900.dts

   1 /*
   2  * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
   3  * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 (or later) as
   7  * published by the Free Software Foundation.
   8  */
   9
  10 /dts-v1/;
  11
  12 #include "omap34xx-hs.dtsi"
  13 #include <dt-bindings/input/input.h>
  14
  15 / {
  16         model = "Nokia N900";
  17         compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
  18
  19         cpus {
  20                 cpu@0 {
  21                         cpu0-supply = <&vcc>;
  22                 };
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27                 heartbeat {
  28                         label = "debug::sleep";
  29                         gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* gpio162 */
  30                         linux,default-trigger = "default-on";
  31                         pinctrl-names = "default";
  32                         pinctrl-0 = <&debug_leds>;
  33                 };
  34         };
  35
  36         memory {
  37                 device_type = "memory";
  38                 reg = <0x80000000 0x10000000>; /* 256 MB */
  39         };
  40
  41         gpio_keys {
  42                 compatible = "gpio-keys";
  43
  44                 camera_lens_cover {
  45                         label = "Camera Lens Cover";
  46                         gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
  47                         linux,input-type = <5>; /* EV_SW */
  48                         linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
  49                         gpio-key,wakeup;
  50                 };
  51
  52                 camera_focus {
  53                         label = "Camera Focus";
  54                         gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
  55                         linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
  56                         gpio-key,wakeup;
  57                 };
  58
  59                 camera_capture {
  60                         label = "Camera Capture";
  61                         gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
  62                         linux,code = <0xd4>; /* KEY_CAMERA */
  63                         gpio-key,wakeup;
  64                 };
  65
  66                 lock_button {
  67                         label = "Lock Button";
  68                         gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
  69                         linux,code = <0x98>; /* KEY_SCREENLOCK */
  70                         gpio-key,wakeup;
  71                 };
  72
  73                 keypad_slide {
  74                         label = "Keypad Slide";
  75                         gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
  76                         linux,input-type = <5>; /* EV_SW */
  77                         linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
  78                         gpio-key,wakeup;
  79                 };
  80
  81                 proximity_sensor {
  82                         label = "Proximity Sensor";
  83                         gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
  84                         linux,input-type = <5>; /* EV_SW */
  85                         linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
  86                 };
  87         };
  88
  89         isp1704: isp1704 {
  90                 compatible = "nxp,isp1704";
  91                 nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
  92                 usb-phy = <&usb2_phy>;
  93         };
  94
  95         tv: connector {
  96                 compatible = "composite-video-connector";
  97                 label = "tv";
  98
  99                 port {
 100                         tv_connector_in: endpoint {
 101                                 remote-endpoint = <&venc_out>;
 102                         };
 103                 };
 104         };
 105
 106         sound: n900-audio {
 107                 compatible = "nokia,n900-audio";
 108
 109                 nokia,cpu-dai = <&mcbsp2>;
 110                 nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
 111                 nokia,headphone-amplifier = <&tpa6130a2>;
 112
 113                 tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
 114                 jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
 115                 eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
 116                 speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
 117         };
 118
 119         battery: n900-battery {
 120                 compatible = "nokia,n900-battery";
 121                 io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
 122                 io-channel-names = "temp", "bsi", "vbat";
 123         };
 124 };
 125
 126 &omap3_pmx_core {
 127         pinctrl-names = "default";
 128
 129         uart2_pins: pinmux_uart2_pins {
 130                 pinctrl-single,pins = <
 131                         0x14a (PIN_INPUT | MUX_MODE0)           /* uart2_rx */
 132                         0x148 (PIN_OUTPUT | MUX_MODE0)          /* uart2_tx */
 133                 >;
 134         };
 135
 136         uart3_pins: pinmux_uart3_pins {
 137                 pinctrl-single,pins = <
 138                         0x16e (PIN_INPUT | MUX_MODE0)           /* uart3_rx */
 139                         0x170 (PIN_OUTPUT | MUX_MODE0)          /* uart3_tx */
 140                 >;
 141         };
 142
 143         ethernet_pins: pinmux_ethernet_pins {
 144                 pinctrl-single,pins = <
 145                         OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4)       /* gpmc_ncs3.gpio_54 */
 146                         OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4)               /* dss_data16.gpio_86 */
 147                         OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)               /* uart3_rts_sd.gpio_164 */
 148                 >;
 149         };
 150
 151         gpmc_pins: pinmux_gpmc_pins {
 152                 pinctrl-single,pins = <
 153
 154                         /* address lines */
 155                         OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
 156                         OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
 157                         OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
 158
 159                         /* data lines, gpmc_d0..d7 not muxable according to TRM */
 160                         OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
 161                         OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
 162                         OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
 163                         OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
 164                         OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
 165                         OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
 166                         OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
 167                         OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
 168
 169                         /*
 170                          * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
 171                          * according to TRM. OneNAND seems to require PIN_INPUT on clock.
 172                          */
 173                         OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
 174                         OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
 175                 >;
 176         };
 177
 178         i2c1_pins: pinmux_i2c1_pins {
 179                 pinctrl-single,pins = <
 180                         0x18a (PIN_INPUT | MUX_MODE0)           /* i2c1_scl */
 181                         0x18c (PIN_INPUT | MUX_MODE0)           /* i2c1_sda */
 182                 >;
 183         };
 184
 185         i2c2_pins: pinmux_i2c2_pins {
 186                 pinctrl-single,pins = <
 187                         0x18e (PIN_INPUT | MUX_MODE0)           /* i2c2_scl */
 188                         0x190 (PIN_INPUT | MUX_MODE0)           /* i2c2_sda */
 189                 >;
 190         };
 191
 192         i2c3_pins: pinmux_i2c3_pins {
 193                 pinctrl-single,pins = <
 194                         0x192 (PIN_INPUT | MUX_MODE0)           /* i2c3_scl */
 195                         0x194 (PIN_INPUT | MUX_MODE0)           /* i2c3_sda */
 196                 >;
 197         };
 198
 199         debug_leds: pinmux_debug_led_pins {
 200                 pinctrl-single,pins = <
 201                         OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)       /* mcbsp1_clkx.gpio_162 */
 202                 >;
 203         };
 204
 205         mcspi4_pins: pinmux_mcspi4_pins {
 206                 pinctrl-single,pins = <
 207                         0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
 208                         0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
 209                         0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
 210                         0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
 211                 >;
 212         };
 213
 214         mmc1_pins: pinmux_mmc1_pins {
 215                 pinctrl-single,pins = <
 216                         0x114 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_clk */
 217                         0x116 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_cmd */
 218                         0x118 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat0 */
 219                         0x11a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat1 */
 220                         0x11c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat2 */
 221                         0x11e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat3 */
 222                 >;
 223         };
 224
 225         mmc2_pins: pinmux_mmc2_pins {
 226                 pinctrl-single,pins = <
 227                         0x128 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_clk */
 228                         0x12a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_cmd */
 229                         0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat0 */
 230                         0x12e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat1 */
 231                         0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat2 */
 232                         0x132 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat3 */
 233                         0x134 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat4 */
 234                         0x136 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat5 */
 235                         0x138 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat6 */
 236                         0x13a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat7 */
 237                 >;
 238         };
 239
 240         acx565akm_pins: pinmux_acx565akm_pins {
 241                 pinctrl-single,pins = <
 242                         0x0d4 (PIN_OUTPUT | MUX_MODE4)          /* RX51_LCD_RESET_GPIO */
 243                 >;
 244         };
 245
 246         dss_sdi_pins: pinmux_dss_sdi_pins {
 247                 pinctrl-single,pins = <
 248                         0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
 249                         0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
 250                         0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
 251                         0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
 252
 253                         0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
 254                         0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
 255                 >;
 256         };
 257
 258         wl1251_pins: pinmux_wl1251 {
 259                 pinctrl-single,pins = <
 260                         0x0ce (PIN_OUTPUT | MUX_MODE4)          /* gpio 87 => wl1251 enable */
 261                         0x05a (PIN_INPUT | MUX_MODE4)           /* gpio 42 => wl1251 irq */
 262                 >;
 263         };
 264
 265         ssi_pins: pinmux_ssi {
 266                 pinctrl-single,pins = <
 267                         0x150 (PIN_INPUT_PULLUP | MUX_MODE1)    /* ssi1_rdy_tx */
 268                         0x14e (PIN_OUTPUT | MUX_MODE1)          /* ssi1_flag_tx */
 269                         0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
 270                         0x14c (PIN_OUTPUT | MUX_MODE1)          /* ssi1_dat_tx */
 271                         0x154 (PIN_INPUT | MUX_MODE1)           /* ssi1_dat_rx */
 272                         0x156 (PIN_INPUT | MUX_MODE1)           /* ssi1_flag_rx */
 273                         0x158 (PIN_OUTPUT | MUX_MODE1)          /* ssi1_rdy_rx */
 274                         0x15a (PIN_OUTPUT | MUX_MODE1)          /* ssi1_wake */
 275                 >;
 276         };
 277
 278         modem_pins: pinmux_modem {
 279                 pinctrl-single,pins = <
 280                         0x0ac (PIN_OUTPUT | MUX_MODE4)          /* gpio 70 => cmt_apeslpx */
 281                         0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
 282                         0x0b2 (PIN_OUTPUT | MUX_MODE4)          /* gpio 73 => cmt_rst_rq */
 283                         0x0b4 (PIN_OUTPUT | MUX_MODE4)          /* gpio 74 => cmt_en */
 284                         0x0b6 (PIN_OUTPUT | MUX_MODE4)          /* gpio 75 => cmt_rst */
 285                         0x15e (PIN_OUTPUT | MUX_MODE4)          /* gpio 157 => cmt_bsi */
 286                 >;
 287         };
 288 };
 289
 290 &i2c1 {
 291         pinctrl-names = "default";
 292         pinctrl-0 = <&i2c1_pins>;
 293
 294         clock-frequency = <2200000>;
 295
 296         twl: twl@48 {
 297                 reg = <0x48>;
 298                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 299                 interrupt-parent = <&intc>;
 300         };
 301 };
 302
 303 #include "twl4030.dtsi"
 304 #include "twl4030_omap3.dtsi"
 305
 306 &vaux1 {
 307         regulator-name = "V28";
 308         regulator-min-microvolt = <2800000>;
 309         regulator-max-microvolt = <2800000>;
 310         regulator-always-on; /* due battery cover sensor */
 311 };
 312
 313 &vaux2 {
 314         regulator-name = "VCSI";
 315         regulator-min-microvolt = <1800000>;
 316         regulator-max-microvolt = <1800000>;
 317 };
 318
 319 &vaux3 {
 320         regulator-name = "VMMC2_30";
 321         regulator-min-microvolt = <2800000>;
 322         regulator-max-microvolt = <3000000>;
 323 };
 324
 325 &vaux4 {
 326         regulator-name = "VCAM_ANA_28";
 327         regulator-min-microvolt = <2800000>;
 328         regulator-max-microvolt = <2800000>;
 329 };
 330
 331 &vmmc1 {
 332         regulator-name = "VMMC1";
 333         regulator-min-microvolt = <1850000>;
 334         regulator-max-microvolt = <3150000>;
 335 };
 336
 337 &vmmc2 {
 338         regulator-name = "V28_A";
 339         regulator-min-microvolt = <2800000>;
 340         regulator-max-microvolt = <3000000>;
 341         regulator-always-on; /* due VIO leak to AIC34 VDDs */
 342 };
 343
 344 &vpll1 {
 345         regulator-name = "VPLL";
 346         regulator-min-microvolt = <1800000>;
 347         regulator-max-microvolt = <1800000>;
 348         regulator-always-on;
 349 };
 350
 351 &vpll2 {
 352         regulator-name = "VSDI_CSI";
 353         regulator-min-microvolt = <1800000>;
 354         regulator-max-microvolt = <1800000>;
 355         regulator-always-on;
 356 };
 357
 358 &vsim {
 359         regulator-name = "VMMC2_IO_18";
 360         regulator-min-microvolt = <1800000>;
 361         regulator-max-microvolt = <1800000>;
 362 };
 363
 364 &vio {
 365         regulator-name = "VIO";
 366         regulator-min-microvolt = <1800000>;
 367         regulator-max-microvolt = <1800000>;
 368
 369 };
 370
 371 &vintana1 {
 372         regulator-name = "VINTANA1";
 373         /* fixed to 1500000 */
 374         regulator-always-on;
 375 };
 376
 377 &vintana2 {
 378         regulator-name = "VINTANA2";
 379         regulator-min-microvolt = <2750000>;
 380         regulator-max-microvolt = <2750000>;
 381         regulator-always-on;
 382 };
 383
 384 &vintdig {
 385         regulator-name = "VINTDIG";
 386         /* fixed to 1500000 */
 387         regulator-always-on;
 388 };
 389
 390 &twl {
 391         twl_audio: audio {
 392                 compatible = "ti,twl4030-audio";
 393                 ti,enable-vibra = <1>;
 394         };
 395
 396         twl_power: power {
 397                 compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
 398                 ti,use_poweroff;
 399         };
 400 };
 401
 402 &twl_keypad {
 403         linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
 404                          MATRIX_KEY(0x00, 0x01, KEY_O)
 405                          MATRIX_KEY(0x00, 0x02, KEY_P)
 406                          MATRIX_KEY(0x00, 0x03, KEY_COMMA)
 407                          MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
 408                          MATRIX_KEY(0x00, 0x06, KEY_A)
 409                          MATRIX_KEY(0x00, 0x07, KEY_S)
 410
 411                          MATRIX_KEY(0x01, 0x00, KEY_W)
 412                          MATRIX_KEY(0x01, 0x01, KEY_D)
 413                          MATRIX_KEY(0x01, 0x02, KEY_F)
 414                          MATRIX_KEY(0x01, 0x03, KEY_G)
 415                          MATRIX_KEY(0x01, 0x04, KEY_H)
 416                          MATRIX_KEY(0x01, 0x05, KEY_J)
 417                          MATRIX_KEY(0x01, 0x06, KEY_K)
 418                          MATRIX_KEY(0x01, 0x07, KEY_L)
 419
 420                          MATRIX_KEY(0x02, 0x00, KEY_E)
 421                          MATRIX_KEY(0x02, 0x01, KEY_DOT)
 422                          MATRIX_KEY(0x02, 0x02, KEY_UP)
 423                          MATRIX_KEY(0x02, 0x03, KEY_ENTER)
 424                          MATRIX_KEY(0x02, 0x05, KEY_Z)
 425                          MATRIX_KEY(0x02, 0x06, KEY_X)
 426                          MATRIX_KEY(0x02, 0x07, KEY_C)
 427                          MATRIX_KEY(0x02, 0x08, KEY_F9)
 428
 429                          MATRIX_KEY(0x03, 0x00, KEY_R)
 430                          MATRIX_KEY(0x03, 0x01, KEY_V)
 431                          MATRIX_KEY(0x03, 0x02, KEY_B)
 432                          MATRIX_KEY(0x03, 0x03, KEY_N)
 433                          MATRIX_KEY(0x03, 0x04, KEY_M)
 434                          MATRIX_KEY(0x03, 0x05, KEY_SPACE)
 435                          MATRIX_KEY(0x03, 0x06, KEY_SPACE)
 436                          MATRIX_KEY(0x03, 0x07, KEY_LEFT)
 437
 438                          MATRIX_KEY(0x04, 0x00, KEY_T)
 439                          MATRIX_KEY(0x04, 0x01, KEY_DOWN)
 440                          MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
 441                          MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
 442                          MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
 443                          MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
 444                          MATRIX_KEY(0x04, 0x08, KEY_F10)
 445
 446                          MATRIX_KEY(0x05, 0x00, KEY_Y)
 447                          MATRIX_KEY(0x05, 0x08, KEY_F11)
 448
 449                          MATRIX_KEY(0x06, 0x00, KEY_U)
 450
 451                          MATRIX_KEY(0x07, 0x00, KEY_I)
 452                          MATRIX_KEY(0x07, 0x01, KEY_F7)
 453                          MATRIX_KEY(0x07, 0x02, KEY_F8)
 454                          >;
 455 };
 456
 457 &twl_gpio {
 458         ti,pullups      = <0x0>;
 459         ti,pulldowns    = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
 460 };
 461
 462 &i2c2 {
 463         pinctrl-names = "default";
 464         pinctrl-0 = <&i2c2_pins>;
 465
 466         clock-frequency = <100000>;
 467
 468         tlv320aic3x: tlv320aic3x@18 {
 469                 compatible = "ti,tlv320aic3x";
 470                 reg = <0x18>;
 471                 gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
 472                 ai3x-gpio-func = <
 473                         0 /* AIC3X_GPIO1_FUNC_DISABLED */
 474                         5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
 475                 >;
 476
 477                 AVDD-supply = <&vmmc2>;
 478                 DRVDD-supply = <&vmmc2>;
 479                 IOVDD-supply = <&vio>;
 480                 DVDD-supply = <&vio>;
 481         };
 482
 483         tlv320aic3x_aux: tlv320aic3x@19 {
 484                 compatible = "ti,tlv320aic3x";
 485                 reg = <0x19>;
 486                 gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
 487
 488                 AVDD-supply = <&vmmc2>;
 489                 DRVDD-supply = <&vmmc2>;
 490                 IOVDD-supply = <&vio>;
 491                 DVDD-supply = <&vio>;
 492         };
 493
 494         tsl2563: tsl2563@29 {
 495                 compatible = "amstaos,tsl2563";
 496                 reg = <0x29>;
 497
 498                 amstaos,cover-comp-gain = <16>;
 499         };
 500
 501         lp5523: lp5523@32 {
 502                 compatible = "national,lp5523";
 503                 reg = <0x32>;
 504                 clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 505                 enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 506
 507                 chan0 {
 508                         chan-name = "lp5523:kb1";
 509                         led-cur = /bits/ 8 <50>;
 510                         max-cur = /bits/ 8 <100>;
 511                 };
 512
 513                 chan1 {
 514                         chan-name = "lp5523:kb2";
 515                         led-cur = /bits/ 8 <50>;
 516                         max-cur = /bits/ 8 <100>;
 517                 };
 518
 519                 chan2 {
 520                         chan-name = "lp5523:kb3";
 521                         led-cur = /bits/ 8 <50>;
 522                         max-cur = /bits/ 8 <100>;
 523                 };
 524
 525                 chan3 {
 526                         chan-name = "lp5523:kb4";
 527                         led-cur = /bits/ 8 <50>;
 528                         max-cur = /bits/ 8 <100>;
 529                 };
 530
 531                 chan4 {
 532                         chan-name = "lp5523:b";
 533                         led-cur = /bits/ 8 <50>;
 534                         max-cur = /bits/ 8 <100>;
 535                 };
 536
 537                 chan5 {
 538                         chan-name = "lp5523:g";
 539                         led-cur = /bits/ 8 <50>;
 540                         max-cur = /bits/ 8 <100>;
 541                 };
 542
 543                 chan6 {
 544                         chan-name = "lp5523:r";
 545                         led-cur = /bits/ 8 <50>;
 546                         max-cur = /bits/ 8 <100>;
 547                 };
 548
 549                 chan7 {
 550                         chan-name = "lp5523:kb5";
 551                         led-cur = /bits/ 8 <50>;
 552                         max-cur = /bits/ 8 <100>;
 553                 };
 554
 555                 chan8 {
 556                         chan-name = "lp5523:kb6";
 557                         led-cur = /bits/ 8 <50>;
 558                         max-cur = /bits/ 8 <100>;
 559                 };
 560         };
 561
 562         bq27200: bq27200@55 {
 563                 compatible = "ti,bq27200";
 564                 reg = <0x55>;
 565         };
 566
 567         tpa6130a2: tpa6130a2@60 {
 568                 compatible = "ti,tpa6130a2";
 569                 reg = <0x60>;
 570
 571                 Vdd-supply = <&vmmc2>;
 572
 573                 power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
 574         };
 575
 576         si4713: si4713@63 {
 577                 compatible = "silabs,si4713";
 578                 reg = <0x63>;
 579
 580                 interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
 581                 reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
 582                 vio-supply = <&vio>;
 583                 vdd-supply = <&vaux1>;
 584         };
 585
 586         bq24150a: bq24150a@6b {
 587                 compatible = "ti,bq24150a";
 588                 reg = <0x6b>;
 589
 590                 ti,current-limit = <100>;
 591                 ti,weak-battery-voltage = <3400>;
 592                 ti,battery-regulation-voltage = <4200>;
 593                 ti,charge-current = <650>;
 594                 ti,termination-current = <100>;
 595                 ti,resistor-sense = <68>;
 596
 597                 ti,usb-charger-detection = <&isp1704>;
 598         };
 599 };
 600
 601 &i2c3 {
 602         pinctrl-names = "default";
 603         pinctrl-0 = <&i2c3_pins>;
 604
 605         clock-frequency = <400000>;
 606 };
 607
 608 &mmc1 {
 609         pinctrl-names = "default";
 610         pinctrl-0 = <&mmc1_pins>;
 611         vmmc-supply = <&vmmc1>;
 612         bus-width = <4>;
 613         cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
 614 };
 615
 616 /* most boards use vaux3, only some old versions use vmmc2 instead */
 617 &mmc2 {
 618         pinctrl-names = "default";
 619         pinctrl-0 = <&mmc2_pins>;
 620         vmmc-supply = <&vaux3>;
 621         vmmc_aux-supply = <&vsim>;
 622         bus-width = <8>;
 623         non-removable;
 624 };
 625
 626 &mmc3 {
 627         status = "disabled";
 628 };
 629
 630 &gpmc {
 631         ranges = <0 0 0x01000000 0x01000000>,   /* 16 MB for OneNAND */
 632                  <1 0 0x02000000 0x01000000>;   /* 16 MB for smc91c96 */
 633         pinctrl-names = "default";
 634         pinctrl-0 = <&gpmc_pins>;
 635
 636         /* sys_ndmareq1 could be used by the driver, not as gpio65 though */
 637         onenand@0,0 {
 638                 #address-cells = <1>;
 639                 #size-cells = <1>;
 640                 reg = <0 0 0x20000>;    /* CS0, offset 0, IO size 128K */
 641
 642                 gpmc,sync-read;
 643                 gpmc,sync-write;
 644                 gpmc,burst-length = <16>;
 645                 gpmc,burst-read;
 646                 gpmc,burst-wrap;
 647                 gpmc,burst-write;
 648                 gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
 649                 gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
 650                 gpmc,cs-on-ns = <0>;
 651                 gpmc,cs-rd-off-ns = <87>;
 652                 gpmc,cs-wr-off-ns = <87>;
 653                 gpmc,adv-on-ns = <0>;
 654                 gpmc,adv-rd-off-ns = <10>;
 655                 gpmc,adv-wr-off-ns = <10>;
 656                 gpmc,oe-on-ns = <15>;
 657                 gpmc,oe-off-ns = <87>;
 658                 gpmc,we-on-ns = <0>;
 659                 gpmc,we-off-ns = <87>;
 660                 gpmc,rd-cycle-ns = <112>;
 661                 gpmc,wr-cycle-ns = <112>;
 662                 gpmc,access-ns = <81>;
 663                 gpmc,page-burst-access-ns = <15>;
 664                 gpmc,bus-turnaround-ns = <0>;
 665                 gpmc,cycle2cycle-delay-ns = <0>;
 666                 gpmc,wait-monitoring-ns = <0>;
 667                 gpmc,clk-activation-ns = <5>;
 668                 gpmc,wr-data-mux-bus-ns = <30>;
 669                 gpmc,wr-access-ns = <81>;
 670                 gpmc,sync-clk-ps = <15000>;
 671
 672                 /*
 673                  * MTD partition table corresponding to Nokia's
 674                  * Maemo 5 (Fremantle) release.
 675                  */
 676                 partition@0 {
 677                         label = "bootloader";
 678                         reg = <0x00000000 0x00020000>;
 679                         read-only;
 680                 };
 681                 partition@1 {
 682                         label = "config";
 683                         reg = <0x00020000 0x00060000>;
 684                 };
 685                 partition@2 {
 686                         label = "log";
 687                         reg = <0x00080000 0x00040000>;
 688                 };
 689                 partition@3 {
 690                         label = "kernel";
 691                         reg = <0x000c0000 0x00200000>;
 692                 };
 693                 partition@4 {
 694                         label = "initfs";
 695                         reg = <0x002c0000 0x00200000>;
 696                 };
 697                 partition@5 {
 698                         label = "rootfs";
 699                         reg = <0x004c0000 0x0fb40000>;
 700                 };
 701         };
 702
 703         ethernet@gpmc {
 704                 compatible = "smsc,lan91c94";
 705
 706                 status = "disabled";
 707
 708                 interrupt-parent = <&gpio2>;
 709                 interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;  /* gpio54 */
 710                 reg = <1 0x300 0xf>;            /* 16 byte IO range at offset 0x300 */
 711                 bank-width = <2>;
 712                 pinctrl-names = "default";
 713                 pinctrl-0 = <&ethernet_pins>;
 714                 power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;     /* gpio86 */
 715                 reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;      /* gpio164 */
 716                 gpmc,device-width = <2>;
 717                 gpmc,sync-clk-ps = <0>;
 718                 gpmc,cs-on-ns = <0>;
 719                 gpmc,cs-rd-off-ns = <48>;
 720                 gpmc,cs-wr-off-ns = <24>;
 721                 gpmc,adv-on-ns = <0>;
 722                 gpmc,adv-rd-off-ns = <0>;
 723                 gpmc,adv-wr-off-ns = <0>;
 724                 gpmc,we-on-ns = <12>;
 725                 gpmc,we-off-ns = <18>;
 726                 gpmc,oe-on-ns = <12>;
 727                 gpmc,oe-off-ns = <48>;
 728                 gpmc,page-burst-access-ns = <0>;
 729                 gpmc,access-ns = <42>;
 730                 gpmc,rd-cycle-ns = <180>;
 731                 gpmc,wr-cycle-ns = <180>;
 732                 gpmc,bus-turnaround-ns = <0>;
 733                 gpmc,cycle2cycle-delay-ns = <0>;
 734                 gpmc,wait-monitoring-ns = <0>;
 735                 gpmc,clk-activation-ns = <0>;
 736                 gpmc,wr-access-ns = <0>;
 737                 gpmc,wr-data-mux-bus-ns = <12>;
 738         };
 739 };
 740
 741 &mcspi1 {
 742         /*
 743          * For some reason, touchscreen is necessary for screen to work at
 744          * all on real hw. It works well without it on emulator.
 745          *
 746          * Also... order in the device tree actually matters here.
 747          */
 748         tsc2005@0 {
 749                 compatible = "ti,tsc2005";
 750                 spi-max-frequency = <6000000>;
 751                 reg = <0>;
 752
 753                 vio-supply = <&vio>;
 754
 755                 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
 756                 interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
 757
 758                 touchscreen-fuzz-x = <4>;
 759                 touchscreen-fuzz-y = <7>;
 760                 touchscreen-fuzz-pressure = <2>;
 761                 touchscreen-max-x = <4096>;
 762                 touchscreen-max-y = <4096>;
 763                 touchscreen-max-pressure = <2048>;
 764
 765                 ti,x-plate-ohms = <280>;
 766                 ti,esd-recovery-timeout-ms = <8000>;
 767         };
 768
 769         acx565akm@2 {
 770                 compatible = "sony,acx565akm";
 771                 spi-max-frequency = <6000000>;
 772                 reg = <2>;
 773
 774                 pinctrl-names = "default";
 775                 pinctrl-0 = <&acx565akm_pins>;
 776
 777                 label = "lcd";
 778                 reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
 779
 780                 port {
 781                         lcd_in: endpoint {
 782                                 remote-endpoint = <&sdi_out>;
 783                         };
 784                 };
 785         };
 786 };
 787
 788 &mcspi4 {
 789         pinctrl-names = "default";
 790         pinctrl-0 = <&mcspi4_pins>;
 791
 792         wl1251@0 {
 793                 pinctrl-names = "default";
 794                 pinctrl-0 = <&wl1251_pins>;
 795
 796                 vio-supply = <&vio>;
 797
 798                 compatible = "ti,wl1251";
 799                 reg = <0>;
 800                 spi-max-frequency = <48000000>;
 801
 802                 spi-cpol;
 803                 spi-cpha;
 804
 805                 ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
 806
 807                 interrupt-parent = <&gpio2>;
 808                 interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
 809         };
 810 };
 811
 812 &usb_otg_hs {
 813         interface-type = <0>;
 814         usb-phy = <&usb2_phy>;
 815         phys = <&usb2_phy>;
 816         phy-names = "usb2-phy";
 817         mode = <2>;
 818         power = <50>;
 819 };
 820
 821 &uart1 {
 822         status = "disabled";
 823 };
 824
 825 &uart2 {
 826         interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 827         pinctrl-names = "default";
 828         pinctrl-0 = <&uart2_pins>;
 829 };
 830
 831 &uart3 {
 832         interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 833         pinctrl-names = "default";
 834         pinctrl-0 = <&uart3_pins>;
 835 };
 836
 837 &dss {
 838         status = "ok";
 839
 840         pinctrl-names = "default";
 841         pinctrl-0 = <&dss_sdi_pins>;
 842
 843         vdds_sdi-supply = <&vaux1>;
 844
 845         ports {
 846                 #address-cells = <1>;
 847                 #size-cells = <0>;
 848
 849                 port@1 {
 850                         reg = <1>;
 851
 852                         sdi_out: endpoint {
 853                                 remote-endpoint = <&lcd_in>;
 854                                 datapairs = <2>;
 855                         };
 856                 };
 857         };
 858 };
 859
 860 &venc {
 861         status = "ok";
 862
 863         vdda-supply = <&vdac>;
 864
 865         port {
 866                 venc_out: endpoint {
 867                         remote-endpoint = <&tv_connector_in>;
 868                         ti,channels = <1>;
 869                 };
 870         };
 871 };
 872
 873 &mcbsp2 {
 874         status = "ok";
 875 };
 876
 877 &ssi_port1 {
 878         pinctrl-names = "default";
 879         pinctrl-0 = <&ssi_pins>;
 880
 881         ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
 882
 883         modem: hsi-client {
 884                 compatible = "nokia,n900-modem";
 885
 886                 pinctrl-names = "default";
 887                 pinctrl-0 = <&modem_pins>;
 888
 889                 hsi-channel-ids = <0>, <1>, <2>, <3>;
 890                 hsi-channel-names = "mcsaab-control",
 891                                     "speech-control",
 892                                     "speech-data",
 893                                     "mcsaab-data";
 894                 hsi-speed-kbps = <55000>;
 895                 hsi-mode = "frame";
 896                 hsi-flow = "synchronized";
 897                 hsi-arb-mode = "round-robin";
 898
 899                 interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
 900
 901                 gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
 902                         <&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
 903                         <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
 904                         <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
 905                         <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
 906                 gpio-names = "cmt_apeslpx",
 907                              "cmt_rst_rq",
 908                              "cmt_en",
 909                              "cmt_rst",
 910                              "cmt_bsi";
 911         };
 912 };
 913
 914 &ssi_port2 {
 915         status = "disabled";
 916 };