Merge tag 'renesas-dt-fixes2-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel...
[cascardo/linux.git] / arch / arm / boot / dts / r8a7791-porter.dts
1 /*
2  * Device Tree Source for the Porter board
3  *
4  * Copyright (C) 2015 Cogent Embedded, Inc.
5  *
6  * This file is licensed under the terms of the GNU General Public License
7  * version 2.  This program is licensed "as is" without any warranty of any
8  * kind, whether express or implied.
9  */
10
11 /*
12  * SSI-AK4642
13  *
14  * JP3: 2-1: AK4642
15  *      2-3: ADV7511
16  *
17  * This command is required before playback/capture:
18  *
19  *      amixer set "LINEOUT Mixer DACL" on
20  */
21
22 /dts-v1/;
23 #include "r8a7791.dtsi"
24 #include <dt-bindings/gpio/gpio.h>
25
26 / {
27         model = "Porter";
28         compatible = "renesas,porter", "renesas,r8a7791";
29
30         aliases {
31                 serial0 = &scif0;
32         };
33
34         chosen {
35                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
36                 stdout-path = "serial0:115200n8";
37         };
38
39         memory@40000000 {
40                 device_type = "memory";
41                 reg = <0 0x40000000 0 0x40000000>;
42         };
43
44         memory@200000000 {
45                 device_type = "memory";
46                 reg = <2 0x00000000 0 0x40000000>;
47         };
48
49         vcc_sdhi0: regulator@0 {
50                 compatible = "regulator-fixed";
51
52                 regulator-name = "SDHI0 Vcc";
53                 regulator-min-microvolt = <3300000>;
54                 regulator-max-microvolt = <3300000>;
55                 regulator-always-on;
56         };
57
58         vccq_sdhi0: regulator@1 {
59                 compatible = "regulator-gpio";
60
61                 regulator-name = "SDHI0 VccQ";
62                 regulator-min-microvolt = <1800000>;
63                 regulator-max-microvolt = <3300000>;
64
65                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
66                 gpios-states = <1>;
67                 states = <3300000 1
68                           1800000 0>;
69         };
70
71         vcc_sdhi2: regulator@2 {
72                 compatible = "regulator-fixed";
73
74                 regulator-name = "SDHI2 Vcc";
75                 regulator-min-microvolt = <3300000>;
76                 regulator-max-microvolt = <3300000>;
77                 regulator-always-on;
78         };
79
80         vccq_sdhi2: regulator@3 {
81                 compatible = "regulator-gpio";
82
83                 regulator-name = "SDHI2 VccQ";
84                 regulator-min-microvolt = <1800000>;
85                 regulator-max-microvolt = <3300000>;
86
87                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
88                 gpios-states = <1>;
89                 states = <3300000 1
90                           1800000 0>;
91         };
92
93         hdmi-out {
94                 compatible = "hdmi-connector";
95                 type = "a";
96
97                 port {
98                         hdmi_con: endpoint {
99                                 remote-endpoint = <&adv7511_out>;
100                         };
101                 };
102         };
103
104         x3_clk: x3-clock {
105                 compatible = "fixed-clock";
106                 #clock-cells = <0>;
107                 clock-frequency = <148500000>;
108         };
109
110         x16_clk: x16-clock {
111                 compatible = "fixed-clock";
112                 #clock-cells = <0>;
113                 clock-frequency = <74250000>;
114         };
115
116         x14_clk: x14-clock {
117                 compatible = "fixed-clock";
118                 #clock-cells = <0>;
119                 clock-frequency = <11289600>;
120                 clock-output-names = "audio_clock";
121         };
122
123         sound {
124                 compatible = "simple-audio-card";
125
126                 simple-audio-card,format = "left_j";
127                 simple-audio-card,bitclock-master = <&soundcodec>;
128                 simple-audio-card,frame-master = <&soundcodec>;
129
130                 simple-audio-card,cpu {
131                         sound-dai = <&rcar_sound>;
132                 };
133
134                 soundcodec: simple-audio-card,codec {
135                         sound-dai = <&ak4642>;
136                         clocks = <&x14_clk>;
137                 };
138         };
139 };
140
141 &extal_clk {
142         clock-frequency = <20000000>;
143 };
144
145 &pfc {
146         pinctrl-0 = <&scif_clk_pins>;
147         pinctrl-names = "default";
148
149         scif0_pins: serial0 {
150                 renesas,groups = "scif0_data_d";
151                 renesas,function = "scif0";
152         };
153
154         scif_clk_pins: scif_clk {
155                 renesas,groups = "scif_clk";
156                 renesas,function = "scif_clk";
157         };
158
159         ether_pins: ether {
160                 renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
161                 renesas,function = "eth";
162         };
163
164         phy1_pins: phy1 {
165                 renesas,groups = "intc_irq0";
166                 renesas,function = "intc";
167         };
168
169         sdhi0_pins: sd0 {
170                 renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
171                 renesas,function = "sdhi0";
172         };
173
174         sdhi2_pins: sd2 {
175                 renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
176                 renesas,function = "sdhi2";
177         };
178
179         qspi_pins: spi0 {
180                 renesas,groups = "qspi_ctrl", "qspi_data4";
181                 renesas,function = "qspi";
182         };
183
184         i2c2_pins: i2c2 {
185                 renesas,groups = "i2c2";
186                 renesas,function = "i2c2";
187         };
188
189         usb0_pins: usb0 {
190                 renesas,groups = "usb0";
191                 renesas,function = "usb0";
192         };
193
194         usb1_pins: usb1 {
195                 renesas,groups = "usb1";
196                 renesas,function = "usb1";
197         };
198
199         vin0_pins: vin0 {
200                 renesas,groups = "vin0_data8", "vin0_clk";
201                 renesas,function = "vin0";
202         };
203
204         can0_pins: can0 {
205                 renesas,groups = "can0_data";
206                 renesas,function = "can0";
207         };
208
209         du_pins: du {
210                 renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
211                 renesas,function = "du";
212         };
213
214         ssi_pins: sound {
215                 renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
216                 renesas,function = "ssi";
217         };
218
219         audio_clk_pins: audio_clk {
220                 renesas,groups = "audio_clk_a";
221                 renesas,function = "audio_clk";
222         };
223 };
224
225 &scif0 {
226         pinctrl-0 = <&scif0_pins>;
227         pinctrl-names = "default";
228
229         status = "okay";
230 };
231
232 &scif_clk {
233         clock-frequency = <14745600>;
234         status = "okay";
235 };
236
237 &ether {
238         pinctrl-0 = <&ether_pins &phy1_pins>;
239         pinctrl-names = "default";
240
241         phy-handle = <&phy1>;
242         renesas,ether-link-active-low;
243         status = "ok";
244
245         phy1: ethernet-phy@1 {
246                 reg = <1>;
247                 interrupt-parent = <&irqc0>;
248                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
249                 micrel,led-mode = <1>;
250         };
251 };
252
253 &sdhi0 {
254         pinctrl-0 = <&sdhi0_pins>;
255         pinctrl-names = "default";
256
257         vmmc-supply = <&vcc_sdhi0>;
258         vqmmc-supply = <&vccq_sdhi0>;
259         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
260         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
261         status = "okay";
262 };
263
264 &sdhi2 {
265         pinctrl-0 = <&sdhi2_pins>;
266         pinctrl-names = "default";
267
268         vmmc-supply = <&vcc_sdhi2>;
269         vqmmc-supply = <&vccq_sdhi2>;
270         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
271         status = "okay";
272 };
273
274 &qspi {
275         pinctrl-0 = <&qspi_pins>;
276         pinctrl-names = "default";
277
278         status = "okay";
279
280         flash@0 {
281                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
282                 reg = <0>;
283                 spi-max-frequency = <30000000>;
284                 spi-tx-bus-width = <4>;
285                 spi-rx-bus-width = <4>;
286                 m25p,fast-read;
287
288                 partitions {
289                         compatible = "fixed-partitions";
290                         #address-cells = <1>;
291                         #size-cells = <1>;
292
293                         partition@0 {
294                                 label = "loader_prg";
295                                 reg = <0x00000000 0x00040000>;
296                                 read-only;
297                         };
298                         partition@40000 {
299                                 label = "user_prg";
300                                 reg = <0x00040000 0x00400000>;
301                                 read-only;
302                         };
303                         partition@440000 {
304                                 label = "flash_fs";
305                                 reg = <0x00440000 0x03bc0000>;
306                         };
307                 };
308         };
309 };
310
311 &i2c2 {
312         pinctrl-0 = <&i2c2_pins>;
313         pinctrl-names = "default";
314
315         status = "okay";
316         clock-frequency = <400000>;
317
318         ak4642: codec@12 {
319                 compatible = "asahi-kasei,ak4642";
320                 #sound-dai-cells = <0>;
321                 reg = <0x12>;
322         };
323
324         composite-in@20 {
325                 compatible = "adi,adv7180";
326                 reg = <0x20>;
327                 remote = <&vin0>;
328
329                 port {
330                         adv7180: endpoint {
331                                 bus-width = <8>;
332                                 remote-endpoint = <&vin0ep>;
333                         };
334                 };
335         };
336
337         hdmi@39 {
338                 compatible = "adi,adv7511w";
339                 reg = <0x39>;
340                 interrupt-parent = <&gpio3>;
341                 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
342
343                 adi,input-depth = <8>;
344                 adi,input-colorspace = "rgb";
345                 adi,input-clock = "1x";
346                 adi,input-style = <1>;
347                 adi,input-justification = "evenly";
348
349                 ports {
350                         #address-cells = <1>;
351                         #size-cells = <0>;
352
353                         port@0 {
354                                 reg = <0>;
355                                 adv7511_in: endpoint {
356                                         remote-endpoint = <&du_out_rgb>;
357                                 };
358                         };
359
360                         port@1 {
361                                 reg = <1>;
362                                 adv7511_out: endpoint {
363                                         remote-endpoint = <&hdmi_con>;
364                                 };
365                         };
366                 };
367         };
368 };
369
370 &sata0 {
371         status = "okay";
372 };
373
374 /* composite video input */
375 &vin0 {
376         status = "ok";
377         pinctrl-0 = <&vin0_pins>;
378         pinctrl-names = "default";
379
380         port {
381                 #address-cells = <1>;
382                 #size-cells = <0>;
383
384                 vin0ep: endpoint {
385                         remote-endpoint = <&adv7180>;
386                         bus-width = <8>;
387                 };
388         };
389 };
390
391 &pci0 {
392         pinctrl-0 = <&usb0_pins>;
393         pinctrl-names = "default";
394
395         status = "okay";
396 };
397
398 &pci1 {
399         pinctrl-0 = <&usb1_pins>;
400         pinctrl-names = "default";
401
402         status = "okay";
403 };
404
405 &hsusb {
406         pinctrl-0 = <&usb0_pins>;
407         pinctrl-names = "default";
408
409         status = "okay";
410 };
411
412 &usbphy {
413         status = "okay";
414 };
415
416 &pcie_bus_clk {
417         status = "okay";
418 };
419
420 &pciec {
421         status = "okay";
422 };
423
424 &can0 {
425         pinctrl-0 = <&can0_pins>;
426         pinctrl-names = "default";
427
428         status = "okay";
429 };
430
431 &du {
432         pinctrl-0 = <&du_pins>;
433         pinctrl-names = "default";
434         status = "okay";
435
436         clocks = <&mstp7_clks R8A7791_CLK_DU0>,
437                  <&mstp7_clks R8A7791_CLK_DU1>,
438                  <&mstp7_clks R8A7791_CLK_LVDS0>,
439                  <&x3_clk>, <&x16_clk>;
440         clock-names = "du.0", "du.1", "lvds.0",
441                       "dclkin.0", "dclkin.1";
442
443         ports {
444                 port@1 {
445                         endpoint {
446                                 remote-endpoint = <&adv7511_in>;
447                         };
448                 };
449         };
450 };
451
452 &rcar_sound {
453         pinctrl-0 = <&ssi_pins &audio_clk_pins>;
454         pinctrl-names = "default";
455         status = "okay";
456
457         /* Single DAI */
458         #sound-dai-cells = <0>;
459
460         rcar_sound,dai {
461                 dai0 {
462                         playback = <&ssi0>;
463                         capture  = <&ssi1>;
464                 };
465         };
466 };
467
468 &ssi1 {
469         shared-pin;
470 };