arch/arm/boot/dts/ste-href.dtsi

   1 /*
   2  * Copyright 2012 ST-Ericsson AB
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/interrupt-controller/irq.h>
  13 #include "ste-dbx5x0.dtsi"
  14 #include "ste-href-family-pinctrl.dtsi"
  15
  16 / {
  17         memory {
  18                 reg = <0x00000000 0x20000000>;
  19         };
  20
  21         soc {
  22                 usb_per5@a03e0000 {
  23                         pinctrl-names = "default", "sleep";
  24                         pinctrl-0 = <&musb_default_mode>;
  25                         pinctrl-1 = <&musb_sleep_mode>;
  26                 };
  27
  28                 uart@80120000 {
  29                         pinctrl-names = "default", "sleep";
  30                         pinctrl-0 = <&uart0_default_mode>;
  31                         pinctrl-1 = <&uart0_sleep_mode>;
  32                         status = "okay";
  33                 };
  34
  35                 uart@80121000 {
  36                         pinctrl-names = "default", "sleep";
  37                         pinctrl-0 = <&uart1_default_mode>;
  38                         pinctrl-1 = <&uart1_sleep_mode>;
  39                         status = "okay";
  40                 };
  41
  42                 uart@80007000 {
  43                         pinctrl-names = "default", "sleep";
  44                         pinctrl-0 = <&uart2_default_mode>;
  45                         pinctrl-1 = <&uart2_sleep_mode>;
  46                         status = "okay";
  47                 };
  48
  49                 i2c@80004000 {
  50                         pinctrl-names = "default","sleep";
  51                         pinctrl-0 = <&i2c0_default_mode>;
  52                         pinctrl-1 = <&i2c0_sleep_mode>;
  53                 };
  54
  55                 i2c@80122000 {
  56                         pinctrl-names = "default","sleep";
  57                         pinctrl-0 = <&i2c1_default_mode>;
  58                         pinctrl-1 = <&i2c1_sleep_mode>;
  59                 };
  60
  61                 i2c@80128000 {
  62                         pinctrl-names = "default","sleep";
  63                         pinctrl-0 = <&i2c2_default_mode>;
  64                         pinctrl-1 = <&i2c2_sleep_mode>;
  65                         lp5521@33 {
  66                                 compatible = "national,lp5521";
  67                                 reg = <0x33>;
  68                                 label = "lp5521_pri";
  69                                 clock-mode = /bits/ 8 <2>;
  70                                 chan0 {
  71                                         led-cur = /bits/ 8 <0x2f>;
  72                                         max-cur = /bits/ 8 <0x5f>;
  73                                         linux,default-trigger = "heartbeat";
  74                                 };
  75                                 chan1 {
  76                                         led-cur = /bits/ 8 <0x2f>;
  77                                         max-cur = /bits/ 8 <0x5f>;
  78                                 };
  79                                 chan2 {
  80                                         led-cur = /bits/ 8 <0x2f>;
  81                                         max-cur = /bits/ 8 <0x5f>;
  82                                 };
  83                         };
  84                         lp5521@34 {
  85                                 compatible = "national,lp5521";
  86                                 reg = <0x34>;
  87                                 label = "lp5521_sec";
  88                                 clock-mode = /bits/ 8 <2>;
  89                                 chan0 {
  90                                         led-cur = /bits/ 8 <0x2f>;
  91                                         max-cur = /bits/ 8 <0x5f>;
  92                                 };
  93                                 chan1 {
  94                                         led-cur = /bits/ 8 <0x2f>;
  95                                         max-cur = /bits/ 8 <0x5f>;
  96                                 };
  97                                 chan2 {
  98                                         led-cur = /bits/ 8 <0x2f>;
  99                                         max-cur = /bits/ 8 <0x5f>;
 100                                 };
 101                         };
 102                         bh1780@29 {
 103                                 compatible = "rohm,bh1780gli";
 104                                 reg = <0x29>;
 105                         };
 106                 };
 107
 108                 i2c@80110000 {
 109                         pinctrl-names = "default","sleep";
 110                         pinctrl-0 = <&i2c3_default_mode>;
 111                         pinctrl-1 = <&i2c3_sleep_mode>;
 112                 };
 113
 114                 // External Micro SD slot
 115                 sdi0_per1@80126000 {
 116                         arm,primecell-periphid = <0x10480180>;
 117                         max-frequency = <100000000>;
 118                         bus-width = <4>;
 119                         mmc-cap-sd-highspeed;
 120                         mmc-cap-mmc-highspeed;
 121                         vmmc-supply = <&ab8500_ldo_aux3_reg>;
 122                         vqmmc-supply = <&vmmci>;
 123                         pinctrl-names = "default", "sleep";
 124                         pinctrl-0 = <&sdi0_default_mode>;
 125                         pinctrl-1 = <&sdi0_sleep_mode>;
 126
 127                         status = "okay";
 128                 };
 129
 130                 // WLAN SDIO channel
 131                 sdi1_per2@80118000 {
 132                         arm,primecell-periphid = <0x10480180>;
 133                         max-frequency = <100000000>;
 134                         bus-width = <4>;
 135                         pinctrl-names = "default", "sleep";
 136                         pinctrl-0 = <&sdi1_default_mode>;
 137                         pinctrl-1 = <&sdi1_sleep_mode>;
 138
 139                         status = "okay";
 140                 };
 141
 142                 // PoP:ed eMMC
 143                 sdi2_per3@80005000 {
 144                         arm,primecell-periphid = <0x10480180>;
 145                         max-frequency = <100000000>;
 146                         bus-width = <8>;
 147                         mmc-cap-mmc-highspeed;
 148                         pinctrl-names = "default", "sleep";
 149                         pinctrl-0 = <&sdi2_default_mode>;
 150                         pinctrl-1 = <&sdi2_sleep_mode>;
 151
 152                         status = "okay";
 153                 };
 154
 155                 // On-board eMMC
 156                 sdi4_per2@80114000 {
 157                         arm,primecell-periphid = <0x10480180>;
 158                         max-frequency = <100000000>;
 159                         bus-width = <8>;
 160                         mmc-cap-mmc-highspeed;
 161                         vmmc-supply = <&ab8500_ldo_aux2_reg>;
 162                         pinctrl-names = "default", "sleep";
 163                         pinctrl-0 = <&sdi4_default_mode>;
 164                         pinctrl-1 = <&sdi4_sleep_mode>;
 165
 166                         status = "okay";
 167                 };
 168
 169                 sound {
 170                         compatible = "stericsson,snd-soc-mop500";
 171
 172                         stericsson,cpu-dai = <&msp1 &msp3>;
 173                         stericsson,audio-codec = <&codec>;
 174                 };
 175
 176                 msp0: msp@80123000 {
 177                         pinctrl-names = "default";
 178                         pinctrl-0 = <&msp0_default_mode>;
 179                         status = "okay";
 180                 };
 181
 182                 msp1: msp@80124000 {
 183                         pinctrl-names = "default";
 184                         pinctrl-0 = <&msp1_default_mode>;
 185                         status = "okay";
 186                 };
 187
 188                 msp2: msp@80117000 {
 189                         pinctrl-names = "default";
 190                         pinctrl-0 = <&msp2_default_mode>;
 191                         status = "okay";
 192                 };
 193
 194                 msp3: msp@80125000 {
 195                         status = "okay";
 196                 };
 197
 198                 prcmu@80157000 {
 199                         ab8500 {
 200                                 ab8500-gpio {
 201                                         compatible = "stericsson,ab8500-gpio";
 202                                 };
 203
 204                                 ab8500-regulators {
 205                                         ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 206                                                 regulator-name = "V-DISPLAY";
 207                                         };
 208
 209                                         ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
 210                                                 regulator-name = "V-eMMC1";
 211                                         };
 212
 213                                         ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
 214                                                 regulator-name = "V-MMC-SD";
 215                                         };
 216
 217                                         ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 218                                                 regulator-name = "V-INTCORE";
 219                                         };
 220
 221                                         ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
 222                                                 regulator-name = "V-TVOUT";
 223                                         };
 224
 225                                         ab8500_ldo_usb_reg: ab8500_ldo_usb {
 226                                                 regulator-name = "dummy";
 227                                         };
 228
 229                                         ab8500_ldo_audio_reg: ab8500_ldo_audio {
 230                                                 regulator-name = "V-AUD";
 231                                         };
 232
 233                                         ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
 234                                                 regulator-name = "V-AMIC1";
 235                                         };
 236
 237                                         ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 238                                                 regulator-name = "V-AMIC2";
 239                                         };
 240
 241                                         ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
 242                                                 regulator-name = "V-DMIC";
 243                                         };
 244
 245                                         ab8500_ldo_ana_reg: ab8500_ldo_ana {
 246                                                 regulator-name = "V-CSI/DSI";
 247                                         };
 248                                 };
 249                         };
 250                 };
 251
 252                 mcde@a0350000 {
 253                         pinctrl-names = "default", "sleep";
 254                         pinctrl-0 = <&lcd_default_mode>;
 255                         pinctrl-1 = <&lcd_sleep_mode>;
 256                 };
 257         };
 258 };