arch/arm/boot/dts/sun4i-a10-cubieboard.dts

   1 /*
   2  * Copyright 2012 Stefan Roese
   3  * Stefan Roese <sr@denx.de>
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 /dts-v1/;
  14 /include/ "sun4i-a10.dtsi"
  15
  16 / {
  17         model = "Cubietech Cubieboard";
  18         compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
  19
  20         aliases {
  21                 serial0 = &uart0;
  22                 serial1 = &uart1;
  23         };
  24
  25         chosen {
  26                 bootargs = "earlyprintk console=ttyS0,115200";
  27         };
  28
  29         soc@01c20000 {
  30                 emac: ethernet@01c0b000 {
  31                         pinctrl-names = "default";
  32                         pinctrl-0 = <&emac_pins_a>;
  33                         phy = <&phy1>;
  34                         status = "okay";
  35                 };
  36
  37                 mdio@01c0b080 {
  38                         status = "okay";
  39
  40                         phy1: ethernet-phy@1 {
  41                                 reg = <1>;
  42                         };
  43                 };
  44
  45                 pinctrl@01c20800 {
  46                         led_pins_cubieboard: led_pins@0 {
  47                                 allwinner,pins = "PH20", "PH21";
  48                                 allwinner,function = "gpio_out";
  49                                 allwinner,drive = <1>;
  50                                 allwinner,pull = <0>;
  51                         };
  52                 };
  53
  54                 uart0: serial@01c28000 {
  55                         pinctrl-names = "default";
  56                         pinctrl-0 = <&uart0_pins_a>;
  57                         status = "okay";
  58                 };
  59         };
  60
  61         leds {
  62                 compatible = "gpio-leds";
  63                 pinctrl-names = "default";
  64                 pinctrl-0 = <&led_pins_cubieboard>;
  65
  66                 blue {
  67                         label = "cubieboard::blue";
  68                         gpios = <&pio 7 21 0>; /* LED1 */
  69                 };
  70
  71                 green {
  72                         label = "cubieboard::green";
  73                         gpios = <&pio 7 20 0>; /* LED2 */
  74                         linux,default-trigger = "heartbeat";
  75                 };
  76         };
  77 };