1 /* linux/arch/arm/mach-s3c2410/mach-h1940.c
3 * Copyright (c) 2003-2005 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
6 * http://www.handhelds.org/projects/h1940.html
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
14 #include <linux/kernel.h>
15 #include <linux/types.h>
16 #include <linux/interrupt.h>
17 #include <linux/list.h>
18 #include <linux/memblock.h>
19 #include <linux/timer.h>
20 #include <linux/init.h>
21 #include <linux/sysdev.h>
22 #include <linux/serial_core.h>
23 #include <linux/platform_device.h>
25 #include <linux/gpio.h>
26 #include <linux/pwm_backlight.h>
27 #include <video/platform_lcd.h>
29 #include <linux/mmc/host.h>
31 #include <asm/mach/arch.h>
32 #include <asm/mach/map.h>
33 #include <asm/mach/irq.h>
35 #include <mach/hardware.h>
37 #include <asm/mach-types.h>
39 #include <plat/regs-serial.h>
40 #include <mach/regs-lcd.h>
41 #include <mach/regs-clock.h>
43 #include <mach/regs-gpio.h>
44 #include <mach/gpio-fns.h>
45 #include <mach/gpio-nrs.h>
47 #include <mach/h1940.h>
48 #include <mach/h1940-latch.h>
53 #include <plat/gpio-cfg.h>
54 #include <plat/clock.h>
55 #include <plat/devs.h>
62 #define H1940_LATCH ((void __force __iomem *)0xF8000000)
64 #define H1940_PA_LATCH S3C2410_CS2
66 #define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END))
68 static struct map_desc h1940_iodesc[] __initdata = {
70 .virtual = (unsigned long)H1940_LATCH,
71 .pfn = __phys_to_pfn(H1940_PA_LATCH),
77 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
78 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
79 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
81 static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
100 .uart_flags = UPF_CONS_FLOW,
107 /* Board control latch control */
109 static unsigned int latch_state = H1940_LATCH_BIT(H1940_LATCH_LCD_P4) |
110 H1940_LATCH_BIT(H1940_LATCH_SM803_ENABLE) |
111 H1940_LATCH_BIT(H1940_LATCH_SDQ1) |
112 H1940_LATCH_BIT(H1940_LATCH_LCD_P1) |
113 H1940_LATCH_BIT(H1940_LATCH_LCD_P2) |
114 H1940_LATCH_BIT(H1940_LATCH_LCD_P3) |
115 H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN);
117 static void h1940_latch_control(unsigned int clear, unsigned int set)
121 local_irq_save(flags);
123 latch_state &= ~clear;
126 __raw_writel(latch_state, H1940_LATCH);
128 local_irq_restore(flags);
131 static inline int h1940_gpiolib_to_latch(int offset)
133 return 1 << (offset + 16);
136 static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
137 unsigned offset, int value)
139 int latch_bit = h1940_gpiolib_to_latch(offset);
141 h1940_latch_control(value ? 0 : latch_bit,
142 value ? latch_bit : 0);
145 static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
146 unsigned offset, int value)
148 h1940_gpiolib_latch_set(chip, offset, value);
152 static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
155 return (latch_state >> (offset + 16)) & 1;
158 struct gpio_chip h1940_latch_gpiochip = {
159 .base = H1940_LATCH_GPIO(0),
160 .owner = THIS_MODULE,
161 .label = "H1940_LATCH",
163 .direction_output = h1940_gpiolib_latch_output,
164 .set = h1940_gpiolib_latch_set,
165 .get = h1940_gpiolib_latch_get,
168 static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
170 printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
174 case S3C2410_UDC_P_ENABLE :
175 gpio_set_value(H1940_LATCH_USB_DP, 1);
177 case S3C2410_UDC_P_DISABLE :
178 gpio_set_value(H1940_LATCH_USB_DP, 0);
180 case S3C2410_UDC_P_RESET :
187 static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
188 .udc_command = h1940_udc_pullup,
189 .vbus_pin = S3C2410_GPG(5),
190 .vbus_pin_inverted = 1,
193 static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
196 .oversampling_shift = 2,
197 .cfg_gpio = s3c24xx_ts_cfg_gpio,
203 static struct s3c2410fb_display h1940_lcd __initdata = {
204 .lcdcon5= S3C2410_LCDCON5_FRM565 | \
205 S3C2410_LCDCON5_INVVLINE | \
206 S3C2410_LCDCON5_HWSWP,
208 .type = S3C2410_LCDCON1_TFT,
223 static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
224 .displays = &h1940_lcd,
226 .default_display = 0,
230 .gpccon_mask= 0xffffffff,
232 .gpcup_mask= 0xffffffff,
234 .gpdcon_mask= 0xffffffff,
236 .gpdup_mask= 0xffffffff,
239 static struct platform_device h1940_device_leds = {
240 .name = "h1940-leds",
244 static struct platform_device h1940_device_bluetooth = {
249 static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
251 switch (power_mode) {
253 gpio_set_value(H1940_LATCH_SD_POWER, 0);
257 gpio_set_value(H1940_LATCH_SD_POWER, 1);
264 static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
265 .gpio_detect = S3C2410_GPF(5),
266 .gpio_wprotect = S3C2410_GPH(8),
267 .set_power = h1940_set_mmc_power,
268 .ocr_avail = MMC_VDD_32_33,
271 static int h1940_backlight_init(struct device *dev)
273 gpio_request(S3C2410_GPB(0), "Backlight");
275 gpio_direction_output(S3C2410_GPB(0), 0);
276 s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
277 s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
282 static void h1940_backlight_exit(struct device *dev)
284 gpio_direction_output(S3C2410_GPB(0), 1);
287 static struct platform_pwm_backlight_data backlight_data = {
289 .max_brightness = 100,
290 .dft_brightness = 50,
292 .pwm_period_ns = 36296,
293 .init = h1940_backlight_init,
294 .exit = h1940_backlight_exit,
297 static struct platform_device h1940_backlight = {
298 .name = "pwm-backlight",
300 .parent = &s3c_device_timer[0].dev,
301 .platform_data = &backlight_data,
306 static void h1940_lcd_power_set(struct plat_lcd_data *pd,
313 gpio_direction_output(S3C2410_GPC(0), 0);
316 value = gpio_get_value(S3C2410_GPC(6));
319 gpio_direction_output(S3C2410_GPC(5), 0);
322 gpio_direction_output(S3C2410_GPC(5), 1);
324 gpio_direction_output(S3C2410_GPC(0), 1);
328 static struct plat_lcd_data h1940_lcd_power_data = {
329 .set_power = h1940_lcd_power_set,
332 static struct platform_device h1940_lcd_powerdev = {
333 .name = "platform-lcd",
334 .dev.parent = &s3c_device_lcd.dev,
335 .dev.platform_data = &h1940_lcd_power_data,
338 static struct platform_device *h1940_devices[] __initdata = {
344 &s3c_device_usbgadget,
346 &h1940_device_bluetooth,
349 &s3c_device_timer[0],
356 static void __init h1940_map_io(void)
358 s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
359 s3c24xx_init_clocks(0);
360 s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
364 #ifdef CONFIG_PM_H1940
365 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
369 WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
372 /* H1940 and RX3715 need to reserve this for suspend */
373 static void __init h1940_reserve(void)
375 memblock_reserve(0x30003000, 0x1000);
376 memblock_reserve(0x30081000, 0x1000);
379 static void __init h1940_init_irq(void)
384 static void __init h1940_init(void)
388 s3c24xx_fb_set_platdata(&h1940_fb_info);
389 s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
390 s3c24xx_udc_set_platdata(&h1940_udc_cfg);
391 s3c24xx_ts_set_platdata(&h1940_ts_cfg);
392 s3c_i2c0_set_platdata(NULL);
394 /* Turn off suspend on both USB ports, and switch the
395 * selectable USB port to USB device mode. */
397 s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
398 S3C2410_MISCCR_USBSUSPND0 |
399 S3C2410_MISCCR_USBSUSPND1, 0x0);
401 tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
402 | (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
403 | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
404 writel(tmp, S3C2410_UPLLCON);
406 gpio_request(S3C2410_GPC(0), "LCD power");
407 gpio_request(S3C2410_GPC(5), "LCD power");
408 gpio_request(S3C2410_GPC(6), "LCD power");
409 gpio_direction_input(S3C2410_GPC(6));
411 gpio_request(H1940_LATCH_USB_DP, "USB pullup");
412 gpio_direction_output(H1940_LATCH_USB_DP, 0);
414 gpio_request(H1940_LATCH_SD_POWER, "SD power");
415 gpio_direction_output(H1940_LATCH_SD_POWER, 0);
417 platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
420 MACHINE_START(H1940, "IPAQ-H1940")
421 /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
422 .phys_io = S3C2410_PA_UART,
423 .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
424 .boot_params = S3C2410_SDRAM_PA + 0x100,
425 .map_io = h1940_map_io,
426 .reserve = h1940_reserve,
427 .init_irq = h1940_init_irq,
428 .init_machine = h1940_init,
429 .timer = &s3c24xx_timer,