2 * File: arch/blackfin/mach-bf537/boards/cm_bf537.c
3 * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
4 * Author: Aidan Williams <aidan@nicta.com.au>
7 * Description: Board description file
10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2006 Analog Devices Inc.
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see the file COPYING, or write
27 * to the Free Software Foundation, Inc.,
28 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
31 #include <linux/device.h>
32 #include <linux/etherdevice.h>
33 #include <linux/platform_device.h>
34 #include <linux/mtd/mtd.h>
35 #include <linux/mtd/partitions.h>
36 #include <linux/mtd/physmap.h>
37 #include <linux/spi/spi.h>
38 #include <linux/spi/flash.h>
39 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
40 #include <linux/usb/isp1362.h>
42 #include <linux/ata_platform.h>
43 #include <linux/irq.h>
45 #include <asm/bfin5xx_spi.h>
46 #include <asm/portmux.h>
50 * Name the Board for the /proc/cpuinfo
52 const char bfin_board_name[] = "Bluetechnix CM BF537E";
54 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
55 /* all SPI peripherals info goes here */
57 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
58 static struct mtd_partition bfin_spi_flash_partitions[] = {
60 .name = "bootloader(spi)",
63 .mask_flags = MTD_CAP_ROM
65 .name = "linux kernel(spi)",
69 .name = "file system(spi)",
75 static struct flash_platform_data bfin_spi_flash_data = {
77 .parts = bfin_spi_flash_partitions,
78 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
82 /* SPI flash chip (m25p64) */
83 static struct bfin5xx_spi_chip spi_flash_chip_info = {
84 .enable_dma = 0, /* use dma transfer with this chip*/
89 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
91 static struct bfin5xx_spi_chip spi_adc_chip_info = {
92 .enable_dma = 1, /* use dma transfer with this chip*/
97 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
98 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
104 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
105 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
111 static struct spi_board_info bfin_spi_board_info[] __initdata = {
112 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
114 /* the modalias must be the same as spi device driver name */
115 .modalias = "m25p80", /* Name of spi_driver for this device */
116 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
117 .bus_num = 0, /* Framework bus number */
118 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
119 .platform_data = &bfin_spi_flash_data,
120 .controller_data = &spi_flash_chip_info,
125 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
127 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
128 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
129 .bus_num = 0, /* Framework bus number */
130 .chip_select = 1, /* Framework chip select. */
131 .platform_data = NULL, /* No spi_driver specific config */
132 .controller_data = &spi_adc_chip_info,
136 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
138 .modalias = "ad1836",
139 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
141 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
142 .controller_data = &ad1836_spi_chip_info,
146 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
148 .modalias = "mmc_spi",
149 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
152 .controller_data = &mmc_spi_chip_info,
159 static struct resource bfin_spi0_resource[] = {
161 .start = SPI0_REGBASE,
162 .end = SPI0_REGBASE + 0xFF,
163 .flags = IORESOURCE_MEM,
168 .flags = IORESOURCE_DMA,
173 .flags = IORESOURCE_IRQ,
177 /* SPI controller data */
178 static struct bfin5xx_spi_master bfin_spi0_info = {
180 .enable_dma = 1, /* master has the ability to do dma transfer */
181 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
184 static struct platform_device bfin_spi0_device = {
186 .id = 0, /* Bus number */
187 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
188 .resource = bfin_spi0_resource,
190 .platform_data = &bfin_spi0_info, /* Passed to driver */
193 #endif /* spi master and devices */
195 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
196 static struct platform_device rtc_device = {
202 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
203 static struct platform_device hitachi_fb_device = {
204 .name = "hitachi-tx09",
208 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
209 #include <linux/smc91x.h>
211 static struct smc91x_platdata smc91x_info = {
212 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
213 .leda = RPC_LED_100_10,
214 .ledb = RPC_LED_TX_RX,
217 static struct resource smc91x_resources[] = {
220 .end = 0x20200300 + 16,
221 .flags = IORESOURCE_MEM,
225 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
229 static struct platform_device smc91x_device = {
232 .num_resources = ARRAY_SIZE(smc91x_resources),
233 .resource = smc91x_resources,
235 .platform_data = &smc91x_info,
240 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
241 static struct resource isp1362_hcd_resources[] = {
245 .flags = IORESOURCE_MEM,
249 .flags = IORESOURCE_MEM,
253 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
257 static struct isp1362_platform_data isp1362_priv = {
262 .int_edge_triggered = 0,
263 .remote_wakeup_connected = 0,
264 .no_power_switching = 1,
265 .power_switching_mode = 0,
268 static struct platform_device isp1362_hcd_device = {
269 .name = "isp1362-hcd",
272 .platform_data = &isp1362_priv,
274 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
275 .resource = isp1362_hcd_resources,
279 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
280 static struct resource net2272_bfin_resources[] = {
283 .end = 0x20300000 + 0x100,
284 .flags = IORESOURCE_MEM,
288 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
292 static struct platform_device net2272_bfin_device = {
295 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
296 .resource = net2272_bfin_resources,
300 static struct resource bfin_gpios_resources = {
302 .end = MAX_BLACKFIN_GPIOS - 1,
303 .flags = IORESOURCE_IRQ,
306 static struct platform_device bfin_gpios_device = {
307 .name = "simple-gpio",
310 .resource = &bfin_gpios_resources,
313 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
314 static struct mtd_partition cm_partitions[] = {
316 .name = "bootloader(nor)",
320 .name = "linux kernel(nor)",
322 .offset = MTDPART_OFS_APPEND,
324 .name = "file system(nor)",
325 .size = MTDPART_SIZ_FULL,
326 .offset = MTDPART_OFS_APPEND,
330 static struct physmap_flash_data cm_flash_data = {
332 .parts = cm_partitions,
333 .nr_parts = ARRAY_SIZE(cm_partitions),
336 static unsigned cm_flash_gpios[] = { GPIO_PF4 };
338 static struct resource cm_flash_resource[] = {
343 .flags = IORESOURCE_MEM,
345 .start = (unsigned long)cm_flash_gpios,
346 .end = ARRAY_SIZE(cm_flash_gpios),
347 .flags = IORESOURCE_IRQ,
351 static struct platform_device cm_flash_device = {
352 .name = "gpio-addr-flash",
355 .platform_data = &cm_flash_data,
357 .num_resources = ARRAY_SIZE(cm_flash_resource),
358 .resource = cm_flash_resource,
362 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
363 #ifdef CONFIG_SERIAL_BFIN_UART0
364 static struct resource bfin_uart0_resources[] = {
368 .flags = IORESOURCE_MEM,
371 .start = IRQ_UART0_RX,
372 .end = IRQ_UART0_RX+1,
373 .flags = IORESOURCE_IRQ,
376 .start = IRQ_UART0_ERROR,
377 .end = IRQ_UART0_ERROR,
378 .flags = IORESOURCE_IRQ,
381 .start = CH_UART0_TX,
383 .flags = IORESOURCE_DMA,
386 .start = CH_UART0_RX,
388 .flags = IORESOURCE_DMA,
390 #ifdef CONFIG_BFIN_UART0_CTSRTS
393 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
397 .flags = IORESOURCE_IO,
401 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
405 .flags = IORESOURCE_IO,
410 static struct platform_device bfin_uart0_device = {
413 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
414 .resource = bfin_uart0_resources,
417 #ifdef CONFIG_SERIAL_BFIN_UART1
418 static struct resource bfin_uart1_resources[] = {
422 .flags = IORESOURCE_MEM,
425 .start = IRQ_UART1_RX,
426 .end = IRQ_UART1_RX+1,
427 .flags = IORESOURCE_IRQ,
430 .start = IRQ_UART1_ERROR,
431 .end = IRQ_UART1_ERROR,
432 .flags = IORESOURCE_IRQ,
435 .start = CH_UART1_TX,
437 .flags = IORESOURCE_DMA,
440 .start = CH_UART1_RX,
442 .flags = IORESOURCE_DMA,
444 #ifdef CONFIG_BFIN_UART1_CTSRTS
447 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
451 .flags = IORESOURCE_IO,
455 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
459 .flags = IORESOURCE_IO,
464 static struct platform_device bfin_uart1_device = {
467 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
468 .resource = bfin_uart1_resources,
473 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
474 #ifdef CONFIG_BFIN_SIR0
475 static struct resource bfin_sir0_resources[] = {
479 .flags = IORESOURCE_MEM,
482 .start = IRQ_UART0_RX,
483 .end = IRQ_UART0_RX+1,
484 .flags = IORESOURCE_IRQ,
487 .start = CH_UART0_RX,
488 .end = CH_UART0_RX+1,
489 .flags = IORESOURCE_DMA,
492 static struct platform_device bfin_sir0_device = {
495 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
496 .resource = bfin_sir0_resources,
499 #ifdef CONFIG_BFIN_SIR1
500 static struct resource bfin_sir1_resources[] = {
504 .flags = IORESOURCE_MEM,
507 .start = IRQ_UART1_RX,
508 .end = IRQ_UART1_RX+1,
509 .flags = IORESOURCE_IRQ,
512 .start = CH_UART1_RX,
513 .end = CH_UART1_RX+1,
514 .flags = IORESOURCE_DMA,
517 static struct platform_device bfin_sir1_device = {
520 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
521 .resource = bfin_sir1_resources,
526 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
527 static struct resource bfin_twi0_resource[] = {
529 .start = TWI0_REGBASE,
531 .flags = IORESOURCE_MEM,
536 .flags = IORESOURCE_IRQ,
540 static struct platform_device i2c_bfin_twi_device = {
541 .name = "i2c-bfin-twi",
543 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
544 .resource = bfin_twi0_resource,
548 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
549 static struct platform_device bfin_sport0_uart_device = {
550 .name = "bfin-sport-uart",
554 static struct platform_device bfin_sport1_uart_device = {
555 .name = "bfin-sport-uart",
560 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
561 static struct platform_device bfin_mii_bus = {
562 .name = "bfin_mii_bus",
565 static struct platform_device bfin_mac_device = {
567 .dev.platform_data = &bfin_mii_bus,
571 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
572 #define PATA_INT IRQ_PF14
574 static struct pata_platform_info bfin_pata_platform_data = {
576 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
579 static struct resource bfin_pata_resources[] = {
583 .flags = IORESOURCE_MEM,
588 .flags = IORESOURCE_MEM,
593 .flags = IORESOURCE_IRQ,
597 static struct platform_device bfin_pata_device = {
598 .name = "pata_platform",
600 .num_resources = ARRAY_SIZE(bfin_pata_resources),
601 .resource = bfin_pata_resources,
603 .platform_data = &bfin_pata_platform_data,
608 static const unsigned int cclk_vlev_datasheet[] =
610 VRPAIR(VLEV_085, 250000000),
611 VRPAIR(VLEV_090, 376000000),
612 VRPAIR(VLEV_095, 426000000),
613 VRPAIR(VLEV_100, 426000000),
614 VRPAIR(VLEV_105, 476000000),
615 VRPAIR(VLEV_110, 476000000),
616 VRPAIR(VLEV_115, 476000000),
617 VRPAIR(VLEV_120, 500000000),
618 VRPAIR(VLEV_125, 533000000),
619 VRPAIR(VLEV_130, 600000000),
622 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
623 .tuple_tab = cclk_vlev_datasheet,
624 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
625 .vr_settling_time = 25 /* us */,
628 static struct platform_device bfin_dpmc = {
631 .platform_data = &bfin_dmpc_vreg_data,
635 static struct platform_device *cm_bf537e_devices[] __initdata = {
639 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
643 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
647 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
648 #ifdef CONFIG_SERIAL_BFIN_UART0
651 #ifdef CONFIG_SERIAL_BFIN_UART1
656 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
657 #ifdef CONFIG_BFIN_SIR0
660 #ifdef CONFIG_BFIN_SIR1
665 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
666 &i2c_bfin_twi_device,
669 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
670 &bfin_sport0_uart_device,
671 &bfin_sport1_uart_device,
674 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
678 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
682 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
687 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
688 &net2272_bfin_device,
691 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
695 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
699 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
706 static int __init cm_bf537e_init(void)
708 printk(KERN_INFO "%s(): registering device resources\n", __func__);
709 platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
710 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
711 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
714 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
715 irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
720 arch_initcall(cm_bf537e_init);
722 void bfin_get_ether_addr(char *addr)
724 random_ether_addr(addr);
725 printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
727 EXPORT_SYMBOL(bfin_get_ether_addr);