arch/mips/boot/dts/brcm/bcm7346.dtsi

   1 / {
   2         #address-cells = <1>;
   3         #size-cells = <1>;
   4         compatible = "brcm,bcm7346";
   5
   6         cpus {
   7                 #address-cells = <1>;
   8                 #size-cells = <0>;
   9
  10                 mips-hpt-frequency = <163125000>;
  11
  12                 cpu@0 {
  13                         compatible = "brcm,bmips5000";
  14                         device_type = "cpu";
  15                         reg = <0>;
  16                 };
  17
  18                 cpu@1 {
  19                         compatible = "brcm,bmips5000";
  20                         device_type = "cpu";
  21                         reg = <1>;
  22                 };
  23         };
  24
  25         aliases {
  26                 uart0 = &uart0;
  27         };
  28
  29         cpu_intc: cpu_intc {
  30                 #address-cells = <0>;
  31                 compatible = "mti,cpu-interrupt-controller";
  32
  33                 interrupt-controller;
  34                 #interrupt-cells = <1>;
  35         };
  36
  37         clocks {
  38                 uart_clk: uart_clk {
  39                         compatible = "fixed-clock";
  40                         #clock-cells = <0>;
  41                         clock-frequency = <81000000>;
  42                 };
  43         };
  44
  45         rdb {
  46                 #address-cells = <1>;
  47                 #size-cells = <1>;
  48
  49                 compatible = "simple-bus";
  50                 ranges = <0 0x10000000 0x01000000>;
  51
  52                 periph_intc: periph_intc@411400 {
  53                         compatible = "brcm,bcm7038-l1-intc";
  54                         reg = <0x411400 0x30>, <0x411600 0x30>;
  55
  56                         interrupt-controller;
  57                         #interrupt-cells = <1>;
  58
  59                         interrupt-parent = <&cpu_intc>;
  60                         interrupts = <2>, <3>;
  61                 };
  62
  63                 sun_l2_intc: sun_l2_intc@403000 {
  64                         compatible = "brcm,l2-intc";
  65                         reg = <0x403000 0x30>;
  66                         interrupt-controller;
  67                         #interrupt-cells = <1>;
  68                         interrupt-parent = <&periph_intc>;
  69                         interrupts = <51>;
  70                 };
  71
  72                 gisb-arb@400000 {
  73                         compatible = "brcm,bcm7400-gisb-arb";
  74                         reg = <0x400000 0xdc>;
  75                         native-endian;
  76                         interrupt-parent = <&sun_l2_intc>;
  77                         interrupts = <0>, <2>;
  78                         brcm,gisb-arb-master-mask = <0x673>;
  79                         brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
  80                                                      "rdc_0", "raaga_0",
  81                                                      "jtag_0", "svd_0";
  82                 };
  83
  84                 upg_irq0_intc: upg_irq0_intc@406780 {
  85                         compatible = "brcm,bcm7120-l2-intc";
  86                         reg = <0x406780 0x8>;
  87
  88                         brcm,int-map-mask = <0x44>, <0xf000000>;
  89                         brcm,int-fwd-mask = <0x70000>;
  90
  91                         interrupt-controller;
  92                         #interrupt-cells = <1>;
  93
  94                         interrupt-parent = <&periph_intc>;
  95                         interrupts = <59>, <57>;
  96                         interrupt-names = "upg_main", "upg_bsc";
  97                 };
  98
  99                 upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
 100                         compatible = "brcm,bcm7120-l2-intc";
 101                         reg = <0x408b80 0x8>;
 102
 103                         brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
 104                         brcm,int-fwd-mask = <0>;
 105                         brcm,irq-can-wake;
 106
 107                         interrupt-controller;
 108                         #interrupt-cells = <1>;
 109
 110                         interrupt-parent = <&periph_intc>;
 111                         interrupts = <60>, <58>, <62>;
 112                         interrupt-names = "upg_main_aon", "upg_bsc_aon",
 113                                           "upg_spi";
 114                 };
 115
 116                 sun_top_ctrl: syscon@404000 {
 117                         compatible = "brcm,bcm7346-sun-top-ctrl", "syscon";
 118                         reg = <0x404000 0x51c>;
 119                         native-endian;
 120                 };
 121
 122                 reboot {
 123                         compatible = "brcm,brcmstb-reboot";
 124                         syscon = <&sun_top_ctrl 0x304 0x308>;
 125                 };
 126
 127                 uart0: serial@406900 {
 128                         compatible = "ns16550a";
 129                         reg = <0x406900 0x20>;
 130                         reg-io-width = <0x4>;
 131                         reg-shift = <0x2>;
 132                         native-endian;
 133                         interrupt-parent = <&periph_intc>;
 134                         interrupts = <64>;
 135                         clocks = <&uart_clk>;
 136                         status = "disabled";
 137                 };
 138
 139                 uart1: serial@406940 {
 140                         compatible = "ns16550a";
 141                         reg = <0x406940 0x20>;
 142                         reg-io-width = <0x4>;
 143                         reg-shift = <0x2>;
 144                         native-endian;
 145                         interrupt-parent = <&periph_intc>;
 146                         interrupts = <65>;
 147                         clocks = <&uart_clk>;
 148                         status = "disabled";
 149                 };
 150
 151                 uart2: serial@406980 {
 152                         compatible = "ns16550a";
 153                         reg = <0x406980 0x20>;
 154                         reg-io-width = <0x4>;
 155                         reg-shift = <0x2>;
 156                         native-endian;
 157                         interrupt-parent = <&periph_intc>;
 158                         interrupts = <66>;
 159                         clocks = <&uart_clk>;
 160                         status = "disabled";
 161                 };
 162
 163                 bsca: i2c@406200 {
 164                       clock-frequency = <390000>;
 165                       compatible = "brcm,brcmstb-i2c";
 166                       interrupt-parent = <&upg_irq0_intc>;
 167                       reg = <0x406200 0x58>;
 168                       interrupts = <24>;
 169                       interrupt-names = "upg_bsca";
 170                       status = "disabled";
 171                 };
 172
 173                 bscb: i2c@406280 {
 174                       clock-frequency = <390000>;
 175                       compatible = "brcm,brcmstb-i2c";
 176                       interrupt-parent = <&upg_irq0_intc>;
 177                       reg = <0x406280 0x58>;
 178                       interrupts = <25>;
 179                       interrupt-names = "upg_bscb";
 180                       status = "disabled";
 181                 };
 182
 183                 bscc: i2c@406300 {
 184                       clock-frequency = <390000>;
 185                       compatible = "brcm,brcmstb-i2c";
 186                       interrupt-parent = <&upg_irq0_intc>;
 187                       reg = <0x406300 0x58>;
 188                       interrupts = <26>;
 189                       interrupt-names = "upg_bscc";
 190                       status = "disabled";
 191                 };
 192
 193                 bscd: i2c@406380 {
 194                       clock-frequency = <390000>;
 195                       compatible = "brcm,brcmstb-i2c";
 196                       interrupt-parent = <&upg_irq0_intc>;
 197                       reg = <0x406380 0x58>;
 198                       interrupts = <27>;
 199                       interrupt-names = "upg_bscd";
 200                       status = "disabled";
 201                 };
 202
 203                 bsce: i2c@408980 {
 204                       clock-frequency = <390000>;
 205                       compatible = "brcm,brcmstb-i2c";
 206                       interrupt-parent = <&upg_aon_irq0_intc>;
 207                       reg = <0x408980 0x58>;
 208                       interrupts = <27>;
 209                       interrupt-names = "upg_bsce";
 210                       status = "disabled";
 211                 };
 212
 213                 enet0: ethernet@430000 {
 214                         phy-mode = "internal";
 215                         phy-handle = <&phy1>;
 216                         mac-address = [ 00 10 18 36 23 1a ];
 217                         compatible = "brcm,genet-v2";
 218                         #address-cells = <0x1>;
 219                         #size-cells = <0x1>;
 220                         reg = <0x430000 0x4c8c>;
 221                         interrupts = <24>, <25>;
 222                         interrupt-parent = <&periph_intc>;
 223                         status = "disabled";
 224
 225                         mdio@e14 {
 226                                 compatible = "brcm,genet-mdio-v2";
 227                                 #address-cells = <0x1>;
 228                                 #size-cells = <0x0>;
 229                                 reg = <0xe14 0x8>;
 230
 231                                 phy1: ethernet-phy@1 {
 232                                         max-speed = <100>;
 233                                         reg = <0x1>;
 234                                         compatible = "brcm,40nm-ephy",
 235                                                 "ethernet-phy-ieee802.3-c22";
 236                                 };
 237                         };
 238                 };
 239
 240                 ehci0: usb@480300 {
 241                         compatible = "brcm,bcm7346-ehci", "generic-ehci";
 242                         reg = <0x480300 0x100>;
 243                         native-endian;
 244                         interrupt-parent = <&periph_intc>;
 245                         interrupts = <68>;
 246                         status = "disabled";
 247                 };
 248
 249                 ohci0: usb@480400 {
 250                         compatible = "brcm,bcm7346-ohci", "generic-ohci";
 251                         reg = <0x480400 0x100>;
 252                         native-endian;
 253                         no-big-frame-no;
 254                         interrupt-parent = <&periph_intc>;
 255                         interrupts = <70>;
 256                         status = "disabled";
 257                 };
 258
 259                 ehci1: usb@480500 {
 260                         compatible = "brcm,bcm7346-ehci", "generic-ehci";
 261                         reg = <0x480500 0x100>;
 262                         native-endian;
 263                         interrupt-parent = <&periph_intc>;
 264                         interrupts = <69>;
 265                         status = "disabled";
 266                 };
 267
 268                 ohci1: usb@480600 {
 269                         compatible = "brcm,bcm7346-ohci", "generic-ohci";
 270                         reg = <0x480600 0x100>;
 271                         native-endian;
 272                         no-big-frame-no;
 273                         interrupt-parent = <&periph_intc>;
 274                         interrupts = <71>;
 275                         status = "disabled";
 276                 };
 277
 278                 ehci2: usb@490300 {
 279                         compatible = "brcm,bcm7346-ehci", "generic-ehci";
 280                         reg = <0x490300 0x100>;
 281                         native-endian;
 282                         interrupt-parent = <&periph_intc>;
 283                         interrupts = <73>;
 284                         status = "disabled";
 285                 };
 286
 287                 ohci2: usb@490400 {
 288                         compatible = "brcm,bcm7346-ohci", "generic-ohci";
 289                         reg = <0x490400 0x100>;
 290                         native-endian;
 291                         no-big-frame-no;
 292                         interrupt-parent = <&periph_intc>;
 293                         interrupts = <75>;
 294                         status = "disabled";
 295                 };
 296
 297                 ehci3: usb@490500 {
 298                         compatible = "brcm,bcm7346-ehci", "generic-ehci";
 299                         reg = <0x490500 0x100>;
 300                         native-endian;
 301                         interrupt-parent = <&periph_intc>;
 302                         interrupts = <74>;
 303                         status = "disabled";
 304                 };
 305
 306                 ohci3: usb@490600 {
 307                         compatible = "brcm,bcm7346-ohci", "generic-ohci";
 308                         reg = <0x490600 0x100>;
 309                         native-endian;
 310                         no-big-frame-no;
 311                         interrupt-parent = <&periph_intc>;
 312                         interrupts = <76>;
 313                         status = "disabled";
 314                 };
 315
 316                 sata: sata@181000 {
 317                         compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 318                         reg-names = "ahci", "top-ctrl";
 319                         reg = <0x181000 0xa9c>, <0x180020 0x1c>;
 320                         interrupt-parent = <&periph_intc>;
 321                         interrupts = <40>;
 322                         #address-cells = <1>;
 323                         #size-cells = <0>;
 324                         status = "disabled";
 325
 326                         sata0: sata-port@0 {
 327                                 reg = <0>;
 328                                 phys = <&sata_phy0>;
 329                         };
 330
 331                         sata1: sata-port@1 {
 332                                 reg = <1>;
 333                                 phys = <&sata_phy1>;
 334                         };
 335                 };
 336
 337                 sata_phy: sata-phy@180100 {
 338                         compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
 339                         reg = <0x180100 0x0eff>;
 340                         reg-names = "phy";
 341                         #address-cells = <1>;
 342                         #size-cells = <0>;
 343                         status = "disabled";
 344
 345                         sata_phy0: sata-phy@0 {
 346                                 reg = <0>;
 347                                 #phy-cells = <0>;
 348                         };
 349
 350                         sata_phy1: sata-phy@1 {
 351                                 reg = <1>;
 352                                 #phy-cells = <0>;
 353                         };
 354                 };
 355         };
 356 };