arch/mips/boot/dts/brcm/bcm7435.dtsi

   1 / {
   2         #address-cells = <1>;
   3         #size-cells = <1>;
   4         compatible = "brcm,bcm7435";
   5
   6         cpus {
   7                 #address-cells = <1>;
   8                 #size-cells = <0>;
   9
  10                 mips-hpt-frequency = <163125000>;
  11
  12                 cpu@0 {
  13                         compatible = "brcm,bmips5200";
  14                         device_type = "cpu";
  15                         reg = <0>;
  16                 };
  17
  18                 cpu@1 {
  19                         compatible = "brcm,bmips5200";
  20                         device_type = "cpu";
  21                         reg = <1>;
  22                 };
  23
  24                 cpu@2 {
  25                         compatible = "brcm,bmips5200";
  26                         device_type = "cpu";
  27                         reg = <2>;
  28                 };
  29
  30                 cpu@3 {
  31                         compatible = "brcm,bmips5200";
  32                         device_type = "cpu";
  33                         reg = <3>;
  34                 };
  35         };
  36
  37         aliases {
  38                 uart0 = &uart0;
  39         };
  40
  41         cpu_intc: cpu_intc {
  42                 #address-cells = <0>;
  43                 compatible = "mti,cpu-interrupt-controller";
  44
  45                 interrupt-controller;
  46                 #interrupt-cells = <1>;
  47         };
  48
  49         clocks {
  50                 uart_clk: uart_clk {
  51                         compatible = "fixed-clock";
  52                         #clock-cells = <0>;
  53                         clock-frequency = <81000000>;
  54                 };
  55         };
  56
  57         rdb {
  58                 #address-cells = <1>;
  59                 #size-cells = <1>;
  60
  61                 compatible = "simple-bus";
  62                 ranges = <0 0x10000000 0x01000000>;
  63
  64                 periph_intc: periph_intc@41b500 {
  65                         compatible = "brcm,bcm7038-l1-intc";
  66                         reg = <0x41b500 0x40>, <0x41b600 0x40>;
  67
  68                         interrupt-controller;
  69                         #interrupt-cells = <1>;
  70
  71                         interrupt-parent = <&cpu_intc>;
  72                         interrupts = <2>, <3>;
  73                 };
  74
  75                 sun_l2_intc: sun_l2_intc@403000 {
  76                         compatible = "brcm,l2-intc";
  77                         reg = <0x403000 0x30>;
  78                         interrupt-controller;
  79                         #interrupt-cells = <1>;
  80                         interrupt-parent = <&periph_intc>;
  81                         interrupts = <52>;
  82                 };
  83
  84                 gisb-arb@400000 {
  85                         compatible = "brcm,bcm7400-gisb-arb";
  86                         reg = <0x400000 0xdc>;
  87                         native-endian;
  88                         interrupt-parent = <&sun_l2_intc>;
  89                         interrupts = <0>, <2>;
  90                         brcm,gisb-arb-master-mask = <0xf77f>;
  91                         brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "webcpu_0",
  92                                                      "pcie_0", "bsp_0",
  93                                                      "rdc_0", "raaga_0",
  94                                                      "avd_1", "jtag_0",
  95                                                      "svd_0", "vice_0",
  96                                                      "vice_1", "raaga_1",
  97                                                      "scpu";
  98                 };
  99
 100                 upg_irq0_intc: upg_irq0_intc@406780 {
 101                         compatible = "brcm,bcm7120-l2-intc";
 102                         reg = <0x406780 0x8>;
 103
 104                         brcm,int-map-mask = <0x44>;
 105                         brcm,int-fwd-mask = <0x70000>;
 106
 107                         interrupt-controller;
 108                         #interrupt-cells = <1>;
 109
 110                         interrupt-parent = <&periph_intc>;
 111                         interrupts = <60>;
 112                 };
 113
 114                 sun_top_ctrl: syscon@404000 {
 115                         compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
 116                         reg = <0x404000 0x51c>;
 117                 };
 118
 119                 reboot {
 120                         compatible = "brcm,brcmstb-reboot";
 121                         syscon = <&sun_top_ctrl 0x304 0x308>;
 122                 };
 123
 124                 uart0: serial@406b00 {
 125                         compatible = "ns16550a";
 126                         reg = <0x406b00 0x20>;
 127                         reg-io-width = <0x4>;
 128                         reg-shift = <0x2>;
 129                         interrupt-parent = <&periph_intc>;
 130                         interrupts = <66>;
 131                         clocks = <&uart_clk>;
 132                         status = "disabled";
 133                 };
 134
 135                 enet0: ethernet@b80000 {
 136                         phy-mode = "internal";
 137                         phy-handle = <&phy1>;
 138                         mac-address = [ 00 10 18 36 23 1a ];
 139                         compatible = "brcm,genet-v3";
 140                         #address-cells = <0x1>;
 141                         #size-cells = <0x1>;
 142                         reg = <0xb80000 0x11c88>;
 143                         interrupts = <17>, <18>;
 144                         interrupt-parent = <&periph_intc>;
 145                         status = "disabled";
 146
 147                         mdio@e14 {
 148                                 compatible = "brcm,genet-mdio-v3";
 149                                 #address-cells = <0x1>;
 150                                 #size-cells = <0x0>;
 151                                 reg = <0xe14 0x8>;
 152
 153                                 phy1: ethernet-phy@1 {
 154                                         max-speed = <100>;
 155                                         reg = <0x1>;
 156                                         compatible = "brcm,40nm-ephy",
 157                                                 "ethernet-phy-ieee802.3-c22";
 158                                 };
 159                         };
 160                 };
 161
 162                 ehci0: usb@480300 {
 163                         compatible = "brcm,bcm7435-ehci", "generic-ehci";
 164                         reg = <0x480300 0x100>;
 165                         native-endian;
 166                         interrupt-parent = <&periph_intc>;
 167                         interrupts = <70>;
 168                         status = "disabled";
 169                 };
 170
 171                 ohci0: usb@480400 {
 172                         compatible = "brcm,bcm7435-ohci", "generic-ohci";
 173                         reg = <0x480400 0x100>;
 174                         native-endian;
 175                         no-big-frame-no;
 176                         interrupt-parent = <&periph_intc>;
 177                         interrupts = <72>;
 178                         status = "disabled";
 179                 };
 180
 181                 ehci1: usb@480500 {
 182                         compatible = "brcm,bcm7435-ehci", "generic-ehci";
 183                         reg = <0x480500 0x100>;
 184                         native-endian;
 185                         interrupt-parent = <&periph_intc>;
 186                         interrupts = <71>;
 187                         status = "disabled";
 188                 };
 189
 190                 ohci1: usb@480600 {
 191                         compatible = "brcm,bcm7435-ohci", "generic-ohci";
 192                         reg = <0x480600 0x100>;
 193                         native-endian;
 194                         no-big-frame-no;
 195                         interrupt-parent = <&periph_intc>;
 196                         interrupts = <73>;
 197                         status = "disabled";
 198                 };
 199
 200                 ehci2: usb@490300 {
 201                         compatible = "brcm,bcm7435-ehci", "generic-ehci";
 202                         reg = <0x490300 0x100>;
 203                         native-endian;
 204                         interrupt-parent = <&periph_intc>;
 205                         interrupts = <75>;
 206                         status = "disabled";
 207                 };
 208
 209                 ohci2: usb@490400 {
 210                         compatible = "brcm,bcm7435-ohci", "generic-ohci";
 211                         reg = <0x490400 0x100>;
 212                         native-endian;
 213                         no-big-frame-no;
 214                         interrupt-parent = <&periph_intc>;
 215                         interrupts = <77>;
 216                         status = "disabled";
 217                 };
 218
 219                 ehci3: usb@490500 {
 220                         compatible = "brcm,bcm7435-ehci", "generic-ehci";
 221                         reg = <0x490500 0x100>;
 222                         native-endian;
 223                         interrupt-parent = <&periph_intc>;
 224                         interrupts = <76>;
 225                         status = "disabled";
 226                 };
 227
 228                 ohci3: usb@490600 {
 229                         compatible = "brcm,bcm7435-ohci", "generic-ohci";
 230                         reg = <0x490600 0x100>;
 231                         native-endian;
 232                         no-big-frame-no;
 233                         interrupt-parent = <&periph_intc>;
 234                         interrupts = <78>;
 235                         status = "disabled";
 236                 };
 237         };
 238 };