arch/mips/boot/dts/brcm/bcm7435.dtsi

   1 / {
   2         #address-cells = <1>;
   3         #size-cells = <1>;
   4         compatible = "brcm,bcm7435";
   5
   6         cpus {
   7                 #address-cells = <1>;
   8                 #size-cells = <0>;
   9
  10                 mips-hpt-frequency = <175625000>;
  11
  12                 cpu@0 {
  13                         compatible = "brcm,bmips5200";
  14                         device_type = "cpu";
  15                         reg = <0>;
  16                 };
  17
  18                 cpu@1 {
  19                         compatible = "brcm,bmips5200";
  20                         device_type = "cpu";
  21                         reg = <1>;
  22                 };
  23
  24                 cpu@2 {
  25                         compatible = "brcm,bmips5200";
  26                         device_type = "cpu";
  27                         reg = <2>;
  28                 };
  29
  30                 cpu@3 {
  31                         compatible = "brcm,bmips5200";
  32                         device_type = "cpu";
  33                         reg = <3>;
  34                 };
  35         };
  36
  37         aliases {
  38                 uart0 = &uart0;
  39         };
  40
  41         cpu_intc: cpu_intc {
  42                 #address-cells = <0>;
  43                 compatible = "mti,cpu-interrupt-controller";
  44
  45                 interrupt-controller;
  46                 #interrupt-cells = <1>;
  47         };
  48
  49         clocks {
  50                 uart_clk: uart_clk {
  51                         compatible = "fixed-clock";
  52                         #clock-cells = <0>;
  53                         clock-frequency = <81000000>;
  54                 };
  55         };
  56
  57         rdb {
  58                 #address-cells = <1>;
  59                 #size-cells = <1>;
  60
  61                 compatible = "simple-bus";
  62                 ranges = <0 0x10000000 0x01000000>;
  63
  64                 periph_intc: periph_intc@41b500 {
  65                         compatible = "brcm,bcm7038-l1-intc";
  66                         reg = <0x41b500 0x40>, <0x41b600 0x40>,
  67                                 <0x41b700 0x40>, <0x41b800 0x40>;
  68
  69                         interrupt-controller;
  70                         #interrupt-cells = <1>;
  71
  72                         interrupt-parent = <&cpu_intc>;
  73                         interrupts = <2>, <3>, <2>, <3>;
  74                 };
  75
  76                 sun_l2_intc: sun_l2_intc@403000 {
  77                         compatible = "brcm,l2-intc";
  78                         reg = <0x403000 0x30>;
  79                         interrupt-controller;
  80                         #interrupt-cells = <1>;
  81                         interrupt-parent = <&periph_intc>;
  82                         interrupts = <52>;
  83                 };
  84
  85                 gisb-arb@400000 {
  86                         compatible = "brcm,bcm7435-gisb-arb";
  87                         reg = <0x400000 0xdc>;
  88                         native-endian;
  89                         interrupt-parent = <&sun_l2_intc>;
  90                         interrupts = <0>, <2>;
  91                         brcm,gisb-arb-master-mask = <0xf77f>;
  92                         brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "webcpu_0",
  93                                                      "pcie_0", "bsp_0",
  94                                                      "rdc_0", "raaga_0",
  95                                                      "avd_1", "jtag_0",
  96                                                      "svd_0", "vice_0",
  97                                                      "vice_1", "raaga_1",
  98                                                      "scpu";
  99                 };
 100
 101                 upg_irq0_intc: upg_irq0_intc@406780 {
 102                         compatible = "brcm,bcm7120-l2-intc";
 103                         reg = <0x406780 0x8>;
 104
 105                         brcm,int-map-mask = <0x44>, <0x7000000>;
 106                         brcm,int-fwd-mask = <0x70000>;
 107
 108                         interrupt-controller;
 109                         #interrupt-cells = <1>;
 110
 111                         interrupt-parent = <&periph_intc>;
 112                         interrupts = <60>, <58>;
 113                         interrupt-names = "upg_main", "upg_bsc";
 114                 };
 115
 116                 upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
 117                         compatible = "brcm,bcm7120-l2-intc";
 118                         reg = <0x409480 0x8>;
 119
 120                         brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
 121                         brcm,int-fwd-mask = <0>;
 122                         brcm,irq-can-wake;
 123
 124                         interrupt-controller;
 125                         #interrupt-cells = <1>;
 126
 127                         interrupt-parent = <&periph_intc>;
 128                         interrupts = <61>, <59>, <64>;
 129                         interrupt-names = "upg_main_aon", "upg_bsc_aon",
 130                                           "upg_spi";
 131                 };
 132
 133                 sun_top_ctrl: syscon@404000 {
 134                         compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
 135                         reg = <0x404000 0x51c>;
 136                         native-endian;
 137                 };
 138
 139                 reboot {
 140                         compatible = "brcm,brcmstb-reboot";
 141                         syscon = <&sun_top_ctrl 0x304 0x308>;
 142                 };
 143
 144                 uart0: serial@406b00 {
 145                         compatible = "ns16550a";
 146                         reg = <0x406b00 0x20>;
 147                         reg-io-width = <0x4>;
 148                         reg-shift = <0x2>;
 149                         interrupt-parent = <&periph_intc>;
 150                         interrupts = <66>;
 151                         clocks = <&uart_clk>;
 152                         status = "disabled";
 153                 };
 154
 155                 uart1: serial@406b40 {
 156                         compatible = "ns16550a";
 157                         reg = <0x406b40 0x20>;
 158                         reg-io-width = <0x4>;
 159                         reg-shift = <0x2>;
 160                         interrupt-parent = <&periph_intc>;
 161                         interrupts = <67>;
 162                         clocks = <&uart_clk>;
 163                         status = "disabled";
 164                 };
 165
 166                 uart2: serial@406b80 {
 167                         compatible = "ns16550a";
 168                         reg = <0x406b80 0x20>;
 169                         reg-io-width = <0x4>;
 170                         reg-shift = <0x2>;
 171                         interrupt-parent = <&periph_intc>;
 172                         interrupts = <68>;
 173                         clocks = <&uart_clk>;
 174                         status = "disabled";
 175                 };
 176
 177                 bsca: i2c@406300 {
 178                       clock-frequency = <390000>;
 179                       compatible = "brcm,brcmstb-i2c";
 180                       interrupt-parent = <&upg_irq0_intc>;
 181                       reg = <0x406300 0x58>;
 182                       interrupts = <26>;
 183                       interrupt-names = "upg_bsca";
 184                       status = "disabled";
 185                 };
 186
 187                 bscb: i2c@409400 {
 188                       clock-frequency = <390000>;
 189                       compatible = "brcm,brcmstb-i2c";
 190                       interrupt-parent = <&upg_aon_irq0_intc>;
 191                       reg = <0x409400 0x58>;
 192                       interrupts = <28>;
 193                       interrupt-names = "upg_bscb";
 194                       status = "disabled";
 195                 };
 196
 197                 bscc: i2c@406200 {
 198                       clock-frequency = <390000>;
 199                       compatible = "brcm,brcmstb-i2c";
 200                       interrupt-parent = <&upg_irq0_intc>;
 201                       reg = <0x406200 0x58>;
 202                       interrupts = <24>;
 203                       interrupt-names = "upg_bscc";
 204                       status = "disabled";
 205                 };
 206
 207                 bscd: i2c@406280 {
 208                       clock-frequency = <390000>;
 209                       compatible = "brcm,brcmstb-i2c";
 210                       interrupt-parent = <&upg_irq0_intc>;
 211                       reg = <0x406280 0x58>;
 212                       interrupts = <25>;
 213                       interrupt-names = "upg_bscd";
 214                       status = "disabled";
 215                 };
 216
 217                 bsce: i2c@409180 {
 218                       clock-frequency = <390000>;
 219                       compatible = "brcm,brcmstb-i2c";
 220                       interrupt-parent = <&upg_aon_irq0_intc>;
 221                       reg = <0x409180 0x58>;
 222                       interrupts = <27>;
 223                       interrupt-names = "upg_bsce";
 224                       status = "disabled";
 225                 };
 226
 227                 enet0: ethernet@b80000 {
 228                         phy-mode = "internal";
 229                         phy-handle = <&phy1>;
 230                         mac-address = [ 00 10 18 36 23 1a ];
 231                         compatible = "brcm,genet-v3";
 232                         #address-cells = <0x1>;
 233                         #size-cells = <0x1>;
 234                         reg = <0xb80000 0x11c88>;
 235                         interrupts = <17>, <18>;
 236                         interrupt-parent = <&periph_intc>;
 237                         status = "disabled";
 238
 239                         mdio@e14 {
 240                                 compatible = "brcm,genet-mdio-v3";
 241                                 #address-cells = <0x1>;
 242                                 #size-cells = <0x0>;
 243                                 reg = <0xe14 0x8>;
 244
 245                                 phy1: ethernet-phy@1 {
 246                                         max-speed = <100>;
 247                                         reg = <0x1>;
 248                                         compatible = "brcm,40nm-ephy",
 249                                                 "ethernet-phy-ieee802.3-c22";
 250                                 };
 251                         };
 252                 };
 253
 254                 ehci0: usb@480300 {
 255                         compatible = "brcm,bcm7435-ehci", "generic-ehci";
 256                         reg = <0x480300 0x100>;
 257                         native-endian;
 258                         interrupt-parent = <&periph_intc>;
 259                         interrupts = <70>;
 260                         status = "disabled";
 261                 };
 262
 263                 ohci0: usb@480400 {
 264                         compatible = "brcm,bcm7435-ohci", "generic-ohci";
 265                         reg = <0x480400 0x100>;
 266                         native-endian;
 267                         no-big-frame-no;
 268                         interrupt-parent = <&periph_intc>;
 269                         interrupts = <72>;
 270                         status = "disabled";
 271                 };
 272
 273                 ehci1: usb@480500 {
 274                         compatible = "brcm,bcm7435-ehci", "generic-ehci";
 275                         reg = <0x480500 0x100>;
 276                         native-endian;
 277                         interrupt-parent = <&periph_intc>;
 278                         interrupts = <71>;
 279                         status = "disabled";
 280                 };
 281
 282                 ohci1: usb@480600 {
 283                         compatible = "brcm,bcm7435-ohci", "generic-ohci";
 284                         reg = <0x480600 0x100>;
 285                         native-endian;
 286                         no-big-frame-no;
 287                         interrupt-parent = <&periph_intc>;
 288                         interrupts = <73>;
 289                         status = "disabled";
 290                 };
 291
 292                 ehci2: usb@490300 {
 293                         compatible = "brcm,bcm7435-ehci", "generic-ehci";
 294                         reg = <0x490300 0x100>;
 295                         native-endian;
 296                         interrupt-parent = <&periph_intc>;
 297                         interrupts = <75>;
 298                         status = "disabled";
 299                 };
 300
 301                 ohci2: usb@490400 {
 302                         compatible = "brcm,bcm7435-ohci", "generic-ohci";
 303                         reg = <0x490400 0x100>;
 304                         native-endian;
 305                         no-big-frame-no;
 306                         interrupt-parent = <&periph_intc>;
 307                         interrupts = <77>;
 308                         status = "disabled";
 309                 };
 310
 311                 ehci3: usb@490500 {
 312                         compatible = "brcm,bcm7435-ehci", "generic-ehci";
 313                         reg = <0x490500 0x100>;
 314                         native-endian;
 315                         interrupt-parent = <&periph_intc>;
 316                         interrupts = <76>;
 317                         status = "disabled";
 318                 };
 319
 320                 ohci3: usb@490600 {
 321                         compatible = "brcm,bcm7435-ohci", "generic-ohci";
 322                         reg = <0x490600 0x100>;
 323                         native-endian;
 324                         no-big-frame-no;
 325                         interrupt-parent = <&periph_intc>;
 326                         interrupts = <78>;
 327                         status = "disabled";
 328                 };
 329
 330                 sata: sata@181000 {
 331                         compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 332                         reg-names = "ahci", "top-ctrl";
 333                         reg = <0x181000 0xa9c>, <0x180020 0x1c>;
 334                         interrupt-parent = <&periph_intc>;
 335                         interrupts = <45>;
 336                         #address-cells = <1>;
 337                         #size-cells = <0>;
 338                         status = "disabled";
 339
 340                         sata0: sata-port@0 {
 341                                 reg = <0>;
 342                                 phys = <&sata_phy0>;
 343                         };
 344
 345                         sata1: sata-port@1 {
 346                                 reg = <1>;
 347                                 phys = <&sata_phy1>;
 348                         };
 349                 };
 350
 351                 sata_phy: sata-phy@180100 {
 352                         compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
 353                         reg = <0x180100 0x0eff>;
 354                         reg-names = "phy";
 355                         #address-cells = <1>;
 356                         #size-cells = <0>;
 357                         status = "disabled";
 358
 359                         sata_phy0: sata-phy@0 {
 360                                 reg = <0>;
 361                                 #phy-cells = <0>;
 362                         };
 363
 364                         sata_phy1: sata-phy@1 {
 365                                 reg = <1>;
 366                                 #phy-cells = <0>;
 367                         };
 368                 };
 369         };
 370 };