arch/powerpc/boot/dts/b4860emu.dts

   1 /*
   2  * B4860 emulator Device Tree Source
   3  *
   4  * Copyright 2013 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * This software is provided by Freescale Semiconductor "as is" and any
  24  * express or implied warranties, including, but not limited to, the implied
  25  * warranties of merchantability and fitness for a particular purpose are
  26  * disclaimed. In no event shall Freescale Semiconductor be liable for any
  27  * direct, indirect, incidental, special, exemplary, or consequential damages
  28  * (including, but not limited to, procurement of substitute goods or services;
  29  * loss of use, data, or profits; or business interruption) however caused and
  30  * on any theory of liability, whether in contract, strict liability, or tort
  31  * (including negligence or otherwise) arising in any way out of the use of
  32  * this software, even if advised of the possibility of such damage.
  33  */
  34
  35 /dts-v1/;
  36
  37 /include/ "fsl/e6500_power_isa.dtsi"
  38
  39 / {
  40         compatible = "fsl,B4860";
  41         #address-cells = <2>;
  42         #size-cells = <2>;
  43         interrupt-parent = <&mpic>;
  44
  45         aliases {
  46                 ccsr = &soc;
  47
  48                 serial0 = &serial0;
  49                 serial1 = &serial1;
  50                 serial2 = &serial2;
  51                 serial3 = &serial3;
  52                 dma0 = &dma0;
  53                 dma1 = &dma1;
  54         };
  55
  56         cpus {
  57                 #address-cells = <1>;
  58                 #size-cells = <0>;
  59
  60                 cpu0: PowerPC,e6500@0 {
  61                         device_type = "cpu";
  62                         reg = <0 1>;
  63                         next-level-cache = <&L2>;
  64                         fsl,portid-mapping = <0x80000000>;
  65                 };
  66                 cpu1: PowerPC,e6500@2 {
  67                         device_type = "cpu";
  68                         reg = <2 3>;
  69                         next-level-cache = <&L2>;
  70                         fsl,portid-mapping = <0x80000000>;
  71                 };
  72                 cpu2: PowerPC,e6500@4 {
  73                         device_type = "cpu";
  74                         reg = <4 5>;
  75                         next-level-cache = <&L2>;
  76                         fsl,portid-mapping = <0x80000000>;
  77                 };
  78                 cpu3: PowerPC,e6500@6 {
  79                         device_type = "cpu";
  80                         reg = <6 7>;
  81                         next-level-cache = <&L2>;
  82                         fsl,portid-mapping = <0x80000000>;
  83                 };
  84         };
  85 };
  86
  87 / {
  88         model = "fsl,B4860QDS";
  89         compatible = "fsl,B4860EMU", "fsl,B4860QDS";
  90         #address-cells = <2>;
  91         #size-cells = <2>;
  92         interrupt-parent = <&mpic>;
  93
  94         ifc: localbus@ffe124000 {
  95                 reg = <0xf 0xfe124000 0 0x2000>;
  96                 ranges = <0 0 0xf 0xe8000000 0x08000000
  97                           2 0 0xf 0xff800000 0x00010000
  98                           3 0 0xf 0xffdf0000 0x00008000>;
  99
 100                 nor@0,0 {
 101                         #address-cells = <1>;
 102                         #size-cells = <1>;
 103                         compatible = "cfi-flash";
 104                         reg = <0x0 0x0 0x8000000>;
 105                         bank-width = <2>;
 106                         device-width = <1>;
 107                 };
 108         };
 109
 110         memory {
 111                 device_type = "memory";
 112         };
 113
 114         soc: soc@ffe000000 {
 115                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 116                 reg = <0xf 0xfe000000 0 0x00001000>;
 117         };
 118 };
 119
 120 &ifc {
 121         #address-cells = <2>;
 122         #size-cells = <1>;
 123         compatible = "fsl,ifc", "simple-bus";
 124         interrupts = <25 2 0 0>;
 125 };
 126
 127 &soc {
 128         #address-cells = <1>;
 129         #size-cells = <1>;
 130         device_type = "soc";
 131         compatible = "simple-bus";
 132
 133         soc-sram-error {
 134                 compatible = "fsl,soc-sram-error";
 135                 interrupts = <16 2 1 2>;
 136         };
 137
 138         corenet-law@0 {
 139                 compatible = "fsl,corenet-law";
 140                 reg = <0x0 0x1000>;
 141                 fsl,num-laws = <32>;
 142         };
 143
 144         ddr1: memory-controller@8000 {
 145                 compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 146                 reg = <0x8000 0x1000>;
 147                 interrupts = <16 2 1 8>;
 148         };
 149
 150         ddr2: memory-controller@9000 {
 151                 compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
 152                 reg = <0x9000 0x1000>;
 153                 interrupts = <16 2 1 9>;
 154         };
 155
 156         cpc: l3-cache-controller@10000 {
 157                 compatible = "fsl,b4-l3-cache-controller", "cache";
 158                 reg = <0x10000 0x1000
 159                        0x11000 0x1000>;
 160                 interrupts = <16 2 1 4>;
 161         };
 162
 163         corenet-cf@18000 {
 164                 compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
 165                 reg = <0x18000 0x1000>;
 166                 interrupts = <16 2 1 0>;
 167                 fsl,ccf-num-csdids = <32>;
 168                 fsl,ccf-num-snoopids = <32>;
 169         };
 170
 171         iommu@20000 {
 172                 compatible = "fsl,pamu-v1.0", "fsl,pamu";
 173                 reg = <0x20000 0x4000>;
 174                 fsl,portid-mapping = <0x8000>;
 175                 #address-cells = <1>;
 176                 #size-cells = <1>;
 177                 interrupts = <
 178                         24 2 0 0
 179                         16 2 1 1>;
 180                 pamu0: pamu@0 {
 181                         reg = <0 0x1000>;
 182                         fsl,primary-cache-geometry = <8 1>;
 183                         fsl,secondary-cache-geometry = <32 2>;
 184                 };
 185         };
 186
 187 /include/ "fsl/qoriq-mpic.dtsi"
 188
 189         guts: global-utilities@e0000 {
 190                 compatible = "fsl,b4-device-config";
 191                 reg = <0xe0000 0xe00>;
 192                 fsl,has-rstcr;
 193                 fsl,liodn-bits = <12>;
 194         };
 195
 196 /include/ "fsl/qoriq-clockgen2.dtsi"
 197         global-utilities@e1000 {
 198                 compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
 199         };
 200
 201 /include/ "fsl/qoriq-dma-0.dtsi"
 202         dma@100300 {
 203                 fsl,iommu-parent = <&pamu0>;
 204                 fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
 205         };
 206
 207 /include/ "fsl/qoriq-dma-1.dtsi"
 208         dma@101300 {
 209                 fsl,iommu-parent = <&pamu0>;
 210                 fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
 211         };
 212
 213 /include/ "fsl/qoriq-i2c-0.dtsi"
 214 /include/ "fsl/qoriq-i2c-1.dtsi"
 215 /include/ "fsl/qoriq-duart-0.dtsi"
 216 /include/ "fsl/qoriq-duart-1.dtsi"
 217
 218         L2: l2-cache-controller@c20000 {
 219                 compatible = "fsl,b4-l2-cache-controller";
 220                 reg = <0xc20000 0x1000>;
 221                 next-level-cache = <&cpc>;
 222         };
 223 };