Merge tag 'dts-subdirs-for-arm-soc-v3.19' of git://git.kernel.org/pub/scm/linux/kerne...
[cascardo/linux.git] / arch / powerpc / kernel / exceptions-64s.S
1 /*
2  * This file contains the 64-bit "server" PowerPC variant
3  * of the low level exception handling including exception
4  * vectors, exception return, part of the slb and stab
5  * handling and other fixed offset specific things.
6  *
7  * This file is meant to be #included from head_64.S due to
8  * position dependent assembly.
9  *
10  * Most of this originates from head_64.S and thus has the same
11  * copyright history.
12  *
13  */
14
15 #include <asm/hw_irq.h>
16 #include <asm/exception-64s.h>
17 #include <asm/ptrace.h>
18
19 /*
20  * We layout physical memory as follows:
21  * 0x0000 - 0x00ff : Secondary processor spin code
22  * 0x0100 - 0x17ff : pSeries Interrupt prologs
23  * 0x1800 - 0x4000 : interrupt support common interrupt prologs
24  * 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1
25  * 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1
26  * 0x7000 - 0x7fff : FWNMI data area
27  * 0x8000 - 0x8fff : Initial (CPU0) segment table
28  * 0x9000 -        : Early init and support code
29  */
30         /* Syscall routine is used twice, in reloc-off and reloc-on paths */
31 #define SYSCALL_PSERIES_1                                       \
32 BEGIN_FTR_SECTION                                               \
33         cmpdi   r0,0x1ebe ;                                     \
34         beq-    1f ;                                            \
35 END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)                          \
36         mr      r9,r13 ;                                        \
37         GET_PACA(r13) ;                                         \
38         mfspr   r11,SPRN_SRR0 ;                                 \
39 0:
40
41 #define SYSCALL_PSERIES_2_RFID                                  \
42         mfspr   r12,SPRN_SRR1 ;                                 \
43         ld      r10,PACAKBASE(r13) ;                            \
44         LOAD_HANDLER(r10, system_call_entry) ;                  \
45         mtspr   SPRN_SRR0,r10 ;                                 \
46         ld      r10,PACAKMSR(r13) ;                             \
47         mtspr   SPRN_SRR1,r10 ;                                 \
48         rfid ;                                                  \
49         b       . ;     /* prevent speculative execution */
50
51 #define SYSCALL_PSERIES_3                                       \
52         /* Fast LE/BE switch system call */                     \
53 1:      mfspr   r12,SPRN_SRR1 ;                                 \
54         xori    r12,r12,MSR_LE ;                                \
55         mtspr   SPRN_SRR1,r12 ;                                 \
56         rfid ;          /* return to userspace */               \
57         b       . ;     /* prevent speculative execution */
58
59 #if defined(CONFIG_RELOCATABLE)
60         /*
61          * We can't branch directly; in the direct case we use LR
62          * and system_call_entry restores LR.  (We thus need to move
63          * LR to r10 in the RFID case too.)
64          */
65 #define SYSCALL_PSERIES_2_DIRECT                                \
66         mflr    r10 ;                                           \
67         ld      r12,PACAKBASE(r13) ;                            \
68         LOAD_HANDLER(r12, system_call_entry_direct) ;           \
69         mtctr   r12 ;                                           \
70         mfspr   r12,SPRN_SRR1 ;                                 \
71         /* Re-use of r13... No spare regs to do this */ \
72         li      r13,MSR_RI ;                                    \
73         mtmsrd  r13,1 ;                                         \
74         GET_PACA(r13) ; /* get r13 back */                      \
75         bctr ;
76 #else
77         /* We can branch directly */
78 #define SYSCALL_PSERIES_2_DIRECT                                \
79         mfspr   r12,SPRN_SRR1 ;                                 \
80         li      r10,MSR_RI ;                                    \
81         mtmsrd  r10,1 ;                 /* Set RI (EE=0) */     \
82         b       system_call_entry_direct ;
83 #endif
84
85 /*
86  * This is the start of the interrupt handlers for pSeries
87  * This code runs with relocation off.
88  * Code from here to __end_interrupts gets copied down to real
89  * address 0x100 when we are running a relocatable kernel.
90  * Therefore any relative branches in this section must only
91  * branch to labels in this section.
92  */
93         . = 0x100
94         .globl __start_interrupts
95 __start_interrupts:
96
97         .globl system_reset_pSeries;
98 system_reset_pSeries:
99         HMT_MEDIUM_PPR_DISCARD
100         SET_SCRATCH0(r13)
101 #ifdef CONFIG_PPC_P7_NAP
102 BEGIN_FTR_SECTION
103         /* Running native on arch 2.06 or later, check if we are
104          * waking up from nap. We only handle no state loss and
105          * supervisor state loss. We do -not- handle hypervisor
106          * state loss at this time.
107          */
108         mfspr   r13,SPRN_SRR1
109         rlwinm. r13,r13,47-31,30,31
110         beq     9f
111
112         /* waking up from powersave (nap) state */
113         cmpwi   cr1,r13,2
114         /* Total loss of HV state is fatal, we could try to use the
115          * PIR to locate a PACA, then use an emergency stack etc...
116          * OPAL v3 based powernv platforms have new idle states
117          * which fall in this catagory.
118          */
119         bgt     cr1,8f
120         GET_PACA(r13)
121
122 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
123         li      r0,KVM_HWTHREAD_IN_KERNEL
124         stb     r0,HSTATE_HWTHREAD_STATE(r13)
125         /* Order setting hwthread_state vs. testing hwthread_req */
126         sync
127         lbz     r0,HSTATE_HWTHREAD_REQ(r13)
128         cmpwi   r0,0
129         beq     1f
130         b       kvm_start_guest
131 1:
132 #endif
133
134         beq     cr1,2f
135         b       power7_wakeup_noloss
136 2:      b       power7_wakeup_loss
137
138         /* Fast Sleep wakeup on PowerNV */
139 8:      GET_PACA(r13)
140         b       power7_wakeup_tb_loss
141
142 9:
143 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
144 #endif /* CONFIG_PPC_P7_NAP */
145         EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
146                                  NOTEST, 0x100)
147
148         . = 0x200
149 machine_check_pSeries_1:
150         /* This is moved out of line as it can be patched by FW, but
151          * some code path might still want to branch into the original
152          * vector
153          */
154         HMT_MEDIUM_PPR_DISCARD
155         SET_SCRATCH0(r13)               /* save r13 */
156 #ifdef CONFIG_PPC_P7_NAP
157 BEGIN_FTR_SECTION
158         /* Running native on arch 2.06 or later, check if we are
159          * waking up from nap. We only handle no state loss and
160          * supervisor state loss. We do -not- handle hypervisor
161          * state loss at this time.
162          */
163         mfspr   r13,SPRN_SRR1
164         rlwinm. r13,r13,47-31,30,31
165         OPT_GET_SPR(r13, SPRN_CFAR, CPU_FTR_CFAR)
166         beq     9f
167
168         mfspr   r13,SPRN_SRR1
169         rlwinm. r13,r13,47-31,30,31
170         /* waking up from powersave (nap) state */
171         cmpwi   cr1,r13,2
172         /* Total loss of HV state is fatal. let's just stay stuck here */
173         OPT_GET_SPR(r13, SPRN_CFAR, CPU_FTR_CFAR)
174         bgt     cr1,.
175 9:
176         OPT_SET_SPR(r13, SPRN_CFAR, CPU_FTR_CFAR)
177 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
178 #endif /* CONFIG_PPC_P7_NAP */
179         EXCEPTION_PROLOG_0(PACA_EXMC)
180 BEGIN_FTR_SECTION
181         b       machine_check_pSeries_early
182 FTR_SECTION_ELSE
183         b       machine_check_pSeries_0
184 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
185
186         . = 0x300
187         .globl data_access_pSeries
188 data_access_pSeries:
189         HMT_MEDIUM_PPR_DISCARD
190         SET_SCRATCH0(r13)
191         EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD,
192                                  KVMTEST, 0x300)
193
194         . = 0x380
195         .globl data_access_slb_pSeries
196 data_access_slb_pSeries:
197         HMT_MEDIUM_PPR_DISCARD
198         SET_SCRATCH0(r13)
199         EXCEPTION_PROLOG_0(PACA_EXSLB)
200         EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST, 0x380)
201         std     r3,PACA_EXSLB+EX_R3(r13)
202         mfspr   r3,SPRN_DAR
203 #ifdef __DISABLED__
204         /* Keep that around for when we re-implement dynamic VSIDs */
205         cmpdi   r3,0
206         bge     slb_miss_user_pseries
207 #endif /* __DISABLED__ */
208         mfspr   r12,SPRN_SRR1
209 #ifndef CONFIG_RELOCATABLE
210         b       slb_miss_realmode
211 #else
212         /*
213          * We can't just use a direct branch to slb_miss_realmode
214          * because the distance from here to there depends on where
215          * the kernel ends up being put.
216          */
217         mfctr   r11
218         ld      r10,PACAKBASE(r13)
219         LOAD_HANDLER(r10, slb_miss_realmode)
220         mtctr   r10
221         bctr
222 #endif
223
224         STD_EXCEPTION_PSERIES(0x400, 0x400, instruction_access)
225
226         . = 0x480
227         .globl instruction_access_slb_pSeries
228 instruction_access_slb_pSeries:
229         HMT_MEDIUM_PPR_DISCARD
230         SET_SCRATCH0(r13)
231         EXCEPTION_PROLOG_0(PACA_EXSLB)
232         EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x480)
233         std     r3,PACA_EXSLB+EX_R3(r13)
234         mfspr   r3,SPRN_SRR0            /* SRR0 is faulting address */
235 #ifdef __DISABLED__
236         /* Keep that around for when we re-implement dynamic VSIDs */
237         cmpdi   r3,0
238         bge     slb_miss_user_pseries
239 #endif /* __DISABLED__ */
240         mfspr   r12,SPRN_SRR1
241 #ifndef CONFIG_RELOCATABLE
242         b       slb_miss_realmode
243 #else
244         mfctr   r11
245         ld      r10,PACAKBASE(r13)
246         LOAD_HANDLER(r10, slb_miss_realmode)
247         mtctr   r10
248         bctr
249 #endif
250
251         /* We open code these as we can't have a ". = x" (even with
252          * x = "." within a feature section
253          */
254         . = 0x500;
255         .globl hardware_interrupt_pSeries;
256         .globl hardware_interrupt_hv;
257 hardware_interrupt_pSeries:
258 hardware_interrupt_hv:
259         HMT_MEDIUM_PPR_DISCARD
260         BEGIN_FTR_SECTION
261                 _MASKABLE_EXCEPTION_PSERIES(0x502, hardware_interrupt,
262                                             EXC_HV, SOFTEN_TEST_HV)
263                 KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x502)
264         FTR_SECTION_ELSE
265                 _MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt,
266                                             EXC_STD, SOFTEN_TEST_HV_201)
267                 KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x500)
268         ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
269
270         STD_EXCEPTION_PSERIES(0x600, 0x600, alignment)
271         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x600)
272
273         STD_EXCEPTION_PSERIES(0x700, 0x700, program_check)
274         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x700)
275
276         STD_EXCEPTION_PSERIES(0x800, 0x800, fp_unavailable)
277         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x800)
278
279         . = 0x900
280         .globl decrementer_pSeries
281 decrementer_pSeries:
282         _MASKABLE_EXCEPTION_PSERIES(0x900, decrementer, EXC_STD, SOFTEN_TEST_PR)
283
284         STD_EXCEPTION_HV(0x980, 0x982, hdecrementer)
285
286         MASKABLE_EXCEPTION_PSERIES(0xa00, 0xa00, doorbell_super)
287         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00)
288
289         STD_EXCEPTION_PSERIES(0xb00, 0xb00, trap_0b)
290         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xb00)
291
292         . = 0xc00
293         .globl  system_call_pSeries
294 system_call_pSeries:
295         HMT_MEDIUM
296 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
297         SET_SCRATCH0(r13)
298         GET_PACA(r13)
299         std     r9,PACA_EXGEN+EX_R9(r13)
300         std     r10,PACA_EXGEN+EX_R10(r13)
301         mfcr    r9
302         KVMTEST(0xc00)
303         GET_SCRATCH0(r13)
304 #endif
305         SYSCALL_PSERIES_1
306         SYSCALL_PSERIES_2_RFID
307         SYSCALL_PSERIES_3
308         KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00)
309
310         STD_EXCEPTION_PSERIES(0xd00, 0xd00, single_step)
311         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xd00)
312
313         /* At 0xe??? we have a bunch of hypervisor exceptions, we branch
314          * out of line to handle them
315          */
316         . = 0xe00
317 hv_data_storage_trampoline:
318         SET_SCRATCH0(r13)
319         EXCEPTION_PROLOG_0(PACA_EXGEN)
320         b       h_data_storage_hv
321
322         . = 0xe20
323 hv_instr_storage_trampoline:
324         SET_SCRATCH0(r13)
325         EXCEPTION_PROLOG_0(PACA_EXGEN)
326         b       h_instr_storage_hv
327
328         . = 0xe40
329 emulation_assist_trampoline:
330         SET_SCRATCH0(r13)
331         EXCEPTION_PROLOG_0(PACA_EXGEN)
332         b       emulation_assist_hv
333
334         . = 0xe60
335 hv_exception_trampoline:
336         SET_SCRATCH0(r13)
337         EXCEPTION_PROLOG_0(PACA_EXGEN)
338         b       hmi_exception_early
339
340         . = 0xe80
341 hv_doorbell_trampoline:
342         SET_SCRATCH0(r13)
343         EXCEPTION_PROLOG_0(PACA_EXGEN)
344         b       h_doorbell_hv
345
346         /* We need to deal with the Altivec unavailable exception
347          * here which is at 0xf20, thus in the middle of the
348          * prolog code of the PerformanceMonitor one. A little
349          * trickery is thus necessary
350          */
351         . = 0xf00
352 performance_monitor_pseries_trampoline:
353         SET_SCRATCH0(r13)
354         EXCEPTION_PROLOG_0(PACA_EXGEN)
355         b       performance_monitor_pSeries
356
357         . = 0xf20
358 altivec_unavailable_pseries_trampoline:
359         SET_SCRATCH0(r13)
360         EXCEPTION_PROLOG_0(PACA_EXGEN)
361         b       altivec_unavailable_pSeries
362
363         . = 0xf40
364 vsx_unavailable_pseries_trampoline:
365         SET_SCRATCH0(r13)
366         EXCEPTION_PROLOG_0(PACA_EXGEN)
367         b       vsx_unavailable_pSeries
368
369         . = 0xf60
370 facility_unavailable_trampoline:
371         SET_SCRATCH0(r13)
372         EXCEPTION_PROLOG_0(PACA_EXGEN)
373         b       facility_unavailable_pSeries
374
375         . = 0xf80
376 hv_facility_unavailable_trampoline:
377         SET_SCRATCH0(r13)
378         EXCEPTION_PROLOG_0(PACA_EXGEN)
379         b       facility_unavailable_hv
380
381 #ifdef CONFIG_CBE_RAS
382         STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error)
383         KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
384 #endif /* CONFIG_CBE_RAS */
385
386         STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint)
387         KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_STD, 0x1300)
388
389         . = 0x1500
390         .global denorm_exception_hv
391 denorm_exception_hv:
392         HMT_MEDIUM_PPR_DISCARD
393         mtspr   SPRN_SPRG_HSCRATCH0,r13
394         EXCEPTION_PROLOG_0(PACA_EXGEN)
395         EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0x1500)
396
397 #ifdef CONFIG_PPC_DENORMALISATION
398         mfspr   r10,SPRN_HSRR1
399         mfspr   r11,SPRN_HSRR0          /* save HSRR0 */
400         andis.  r10,r10,(HSRR1_DENORM)@h /* denorm? */
401         addi    r11,r11,-4              /* HSRR0 is next instruction */
402         bne+    denorm_assist
403 #endif
404
405         KVMTEST(0x1500)
406         EXCEPTION_PROLOG_PSERIES_1(denorm_common, EXC_HV)
407         KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x1500)
408
409 #ifdef CONFIG_CBE_RAS
410         STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance)
411         KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
412 #endif /* CONFIG_CBE_RAS */
413
414         STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist)
415         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x1700)
416
417 #ifdef CONFIG_CBE_RAS
418         STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
419         KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
420 #else
421         . = 0x1800
422 #endif /* CONFIG_CBE_RAS */
423
424
425 /*** Out of line interrupts support ***/
426
427         .align  7
428         /* moved from 0x200 */
429 machine_check_pSeries_early:
430 BEGIN_FTR_SECTION
431         EXCEPTION_PROLOG_1(PACA_EXMC, NOTEST, 0x200)
432         /*
433          * Register contents:
434          * R13          = PACA
435          * R9           = CR
436          * Original R9 to R13 is saved on PACA_EXMC
437          *
438          * Switch to mc_emergency stack and handle re-entrancy (we limit
439          * the nested MCE upto level 4 to avoid stack overflow).
440          * Save MCE registers srr1, srr0, dar and dsisr and then set ME=1
441          *
442          * We use paca->in_mce to check whether this is the first entry or
443          * nested machine check. We increment paca->in_mce to track nested
444          * machine checks.
445          *
446          * If this is the first entry then set stack pointer to
447          * paca->mc_emergency_sp, otherwise r1 is already pointing to
448          * stack frame on mc_emergency stack.
449          *
450          * NOTE: We are here with MSR_ME=0 (off), which means we risk a
451          * checkstop if we get another machine check exception before we do
452          * rfid with MSR_ME=1.
453          */
454         mr      r11,r1                  /* Save r1 */
455         lhz     r10,PACA_IN_MCE(r13)
456         cmpwi   r10,0                   /* Are we in nested machine check */
457         bne     0f                      /* Yes, we are. */
458         /* First machine check entry */
459         ld      r1,PACAMCEMERGSP(r13)   /* Use MC emergency stack */
460 0:      subi    r1,r1,INT_FRAME_SIZE    /* alloc stack frame */
461         addi    r10,r10,1               /* increment paca->in_mce */
462         sth     r10,PACA_IN_MCE(r13)
463         /* Limit nested MCE to level 4 to avoid stack overflow */
464         cmpwi   r10,4
465         bgt     2f                      /* Check if we hit limit of 4 */
466         std     r11,GPR1(r1)            /* Save r1 on the stack. */
467         std     r11,0(r1)               /* make stack chain pointer */
468         mfspr   r11,SPRN_SRR0           /* Save SRR0 */
469         std     r11,_NIP(r1)
470         mfspr   r11,SPRN_SRR1           /* Save SRR1 */
471         std     r11,_MSR(r1)
472         mfspr   r11,SPRN_DAR            /* Save DAR */
473         std     r11,_DAR(r1)
474         mfspr   r11,SPRN_DSISR          /* Save DSISR */
475         std     r11,_DSISR(r1)
476         std     r9,_CCR(r1)             /* Save CR in stackframe */
477         /* Save r9 through r13 from EXMC save area to stack frame. */
478         EXCEPTION_PROLOG_COMMON_2(PACA_EXMC)
479         mfmsr   r11                     /* get MSR value */
480         ori     r11,r11,MSR_ME          /* turn on ME bit */
481         ori     r11,r11,MSR_RI          /* turn on RI bit */
482         ld      r12,PACAKBASE(r13)      /* get high part of &label */
483         LOAD_HANDLER(r12, machine_check_handle_early)
484 1:      mtspr   SPRN_SRR0,r12
485         mtspr   SPRN_SRR1,r11
486         rfid
487         b       .       /* prevent speculative execution */
488 2:
489         /* Stack overflow. Stay on emergency stack and panic.
490          * Keep the ME bit off while panic-ing, so that if we hit
491          * another machine check we checkstop.
492          */
493         addi    r1,r1,INT_FRAME_SIZE    /* go back to previous stack frame */
494         ld      r11,PACAKMSR(r13)
495         ld      r12,PACAKBASE(r13)
496         LOAD_HANDLER(r12, unrecover_mce)
497         li      r10,MSR_ME
498         andc    r11,r11,r10             /* Turn off MSR_ME */
499         b       1b
500         b       .       /* prevent speculative execution */
501 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
502
503 machine_check_pSeries:
504         .globl machine_check_fwnmi
505 machine_check_fwnmi:
506         HMT_MEDIUM_PPR_DISCARD
507         SET_SCRATCH0(r13)               /* save r13 */
508         EXCEPTION_PROLOG_0(PACA_EXMC)
509 machine_check_pSeries_0:
510         EXCEPTION_PROLOG_1(PACA_EXMC, KVMTEST, 0x200)
511         EXCEPTION_PROLOG_PSERIES_1(machine_check_common, EXC_STD)
512         KVM_HANDLER_SKIP(PACA_EXMC, EXC_STD, 0x200)
513         KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300)
514         KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380)
515         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x400)
516         KVM_HANDLER_PR(PACA_EXSLB, EXC_STD, 0x480)
517         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x900)
518         KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x982)
519
520 #ifdef CONFIG_PPC_DENORMALISATION
521 denorm_assist:
522 BEGIN_FTR_SECTION
523 /*
524  * To denormalise we need to move a copy of the register to itself.
525  * For POWER6 do that here for all FP regs.
526  */
527         mfmsr   r10
528         ori     r10,r10,(MSR_FP|MSR_FE0|MSR_FE1)
529         xori    r10,r10,(MSR_FE0|MSR_FE1)
530         mtmsrd  r10
531         sync
532
533 #define FMR2(n)  fmr (n), (n) ; fmr n+1, n+1
534 #define FMR4(n)  FMR2(n) ; FMR2(n+2)
535 #define FMR8(n)  FMR4(n) ; FMR4(n+4)
536 #define FMR16(n) FMR8(n) ; FMR8(n+8)
537 #define FMR32(n) FMR16(n) ; FMR16(n+16)
538         FMR32(0)
539
540 FTR_SECTION_ELSE
541 /*
542  * To denormalise we need to move a copy of the register to itself.
543  * For POWER7 do that here for the first 32 VSX registers only.
544  */
545         mfmsr   r10
546         oris    r10,r10,MSR_VSX@h
547         mtmsrd  r10
548         sync
549
550 #define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1)
551 #define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2)
552 #define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4)
553 #define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8)
554 #define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16)
555         XVCPSGNDP32(0)
556
557 ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206)
558
559 BEGIN_FTR_SECTION
560         b       denorm_done
561 END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
562 /*
563  * To denormalise we need to move a copy of the register to itself.
564  * For POWER8 we need to do that for all 64 VSX registers
565  */
566         XVCPSGNDP32(32)
567 denorm_done:
568         mtspr   SPRN_HSRR0,r11
569         mtcrf   0x80,r9
570         ld      r9,PACA_EXGEN+EX_R9(r13)
571         RESTORE_PPR_PACA(PACA_EXGEN, r10)
572 BEGIN_FTR_SECTION
573         ld      r10,PACA_EXGEN+EX_CFAR(r13)
574         mtspr   SPRN_CFAR,r10
575 END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
576         ld      r10,PACA_EXGEN+EX_R10(r13)
577         ld      r11,PACA_EXGEN+EX_R11(r13)
578         ld      r12,PACA_EXGEN+EX_R12(r13)
579         ld      r13,PACA_EXGEN+EX_R13(r13)
580         HRFID
581         b       .
582 #endif
583
584         .align  7
585         /* moved from 0xe00 */
586         STD_EXCEPTION_HV_OOL(0xe02, h_data_storage)
587         KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0xe02)
588         STD_EXCEPTION_HV_OOL(0xe22, h_instr_storage)
589         KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe22)
590         STD_EXCEPTION_HV_OOL(0xe42, emulation_assist)
591         KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe42)
592         MASKABLE_EXCEPTION_HV_OOL(0xe62, hmi_exception)
593         KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe62)
594
595         MASKABLE_EXCEPTION_HV_OOL(0xe82, h_doorbell)
596         KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe82)
597
598         /* moved from 0xf00 */
599         STD_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor)
600         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf00)
601         STD_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable)
602         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf20)
603         STD_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
604         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf40)
605         STD_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
606         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf60)
607         STD_EXCEPTION_HV_OOL(0xf82, facility_unavailable)
608         KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xf82)
609
610 /*
611  * An interrupt came in while soft-disabled. We set paca->irq_happened, then:
612  * - If it was a decrementer interrupt, we bump the dec to max and and return.
613  * - If it was a doorbell we return immediately since doorbells are edge
614  *   triggered and won't automatically refire.
615  * - If it was a HMI we return immediately since we handled it in realmode
616  *   and it won't refire.
617  * - else we hard disable and return.
618  * This is called with r10 containing the value to OR to the paca field.
619  */
620 #define MASKED_INTERRUPT(_H)                            \
621 masked_##_H##interrupt:                                 \
622         std     r11,PACA_EXGEN+EX_R11(r13);             \
623         lbz     r11,PACAIRQHAPPENED(r13);               \
624         or      r11,r11,r10;                            \
625         stb     r11,PACAIRQHAPPENED(r13);               \
626         cmpwi   r10,PACA_IRQ_DEC;                       \
627         bne     1f;                                     \
628         lis     r10,0x7fff;                             \
629         ori     r10,r10,0xffff;                         \
630         mtspr   SPRN_DEC,r10;                           \
631         b       2f;                                     \
632 1:      cmpwi   r10,PACA_IRQ_DBELL;                     \
633         beq     2f;                                     \
634         cmpwi   r10,PACA_IRQ_HMI;                       \
635         beq     2f;                                     \
636         mfspr   r10,SPRN_##_H##SRR1;                    \
637         rldicl  r10,r10,48,1; /* clear MSR_EE */        \
638         rotldi  r10,r10,16;                             \
639         mtspr   SPRN_##_H##SRR1,r10;                    \
640 2:      mtcrf   0x80,r9;                                \
641         ld      r9,PACA_EXGEN+EX_R9(r13);               \
642         ld      r10,PACA_EXGEN+EX_R10(r13);             \
643         ld      r11,PACA_EXGEN+EX_R11(r13);             \
644         GET_SCRATCH0(r13);                              \
645         ##_H##rfid;                                     \
646         b       .
647         
648         MASKED_INTERRUPT()
649         MASKED_INTERRUPT(H)
650
651 /*
652  * Called from arch_local_irq_enable when an interrupt needs
653  * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate
654  * which kind of interrupt. MSR:EE is already off. We generate a
655  * stackframe like if a real interrupt had happened.
656  *
657  * Note: While MSR:EE is off, we need to make sure that _MSR
658  * in the generated frame has EE set to 1 or the exception
659  * handler will not properly re-enable them.
660  */
661 _GLOBAL(__replay_interrupt)
662         /* We are going to jump to the exception common code which
663          * will retrieve various register values from the PACA which
664          * we don't give a damn about, so we don't bother storing them.
665          */
666         mfmsr   r12
667         mflr    r11
668         mfcr    r9
669         ori     r12,r12,MSR_EE
670         cmpwi   r3,0x900
671         beq     decrementer_common
672         cmpwi   r3,0x500
673         beq     hardware_interrupt_common
674 BEGIN_FTR_SECTION
675         cmpwi   r3,0xe80
676         beq     h_doorbell_common
677 FTR_SECTION_ELSE
678         cmpwi   r3,0xa00
679         beq     doorbell_super_common
680 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
681         blr
682
683 #ifdef CONFIG_PPC_PSERIES
684 /*
685  * Vectors for the FWNMI option.  Share common code.
686  */
687         .globl system_reset_fwnmi
688       .align 7
689 system_reset_fwnmi:
690         HMT_MEDIUM_PPR_DISCARD
691         SET_SCRATCH0(r13)               /* save r13 */
692         EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
693                                  NOTEST, 0x100)
694
695 #endif /* CONFIG_PPC_PSERIES */
696
697 #ifdef __DISABLED__
698 /*
699  * This is used for when the SLB miss handler has to go virtual,
700  * which doesn't happen for now anymore but will once we re-implement
701  * dynamic VSIDs for shared page tables
702  */
703 slb_miss_user_pseries:
704         std     r10,PACA_EXGEN+EX_R10(r13)
705         std     r11,PACA_EXGEN+EX_R11(r13)
706         std     r12,PACA_EXGEN+EX_R12(r13)
707         GET_SCRATCH0(r10)
708         ld      r11,PACA_EXSLB+EX_R9(r13)
709         ld      r12,PACA_EXSLB+EX_R3(r13)
710         std     r10,PACA_EXGEN+EX_R13(r13)
711         std     r11,PACA_EXGEN+EX_R9(r13)
712         std     r12,PACA_EXGEN+EX_R3(r13)
713         clrrdi  r12,r13,32
714         mfmsr   r10
715         mfspr   r11,SRR0                        /* save SRR0 */
716         ori     r12,r12,slb_miss_user_common@l  /* virt addr of handler */
717         ori     r10,r10,MSR_IR|MSR_DR|MSR_RI
718         mtspr   SRR0,r12
719         mfspr   r12,SRR1                        /* and SRR1 */
720         mtspr   SRR1,r10
721         rfid
722         b       .                               /* prevent spec. execution */
723 #endif /* __DISABLED__ */
724
725 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
726 kvmppc_skip_interrupt:
727         /*
728          * Here all GPRs are unchanged from when the interrupt happened
729          * except for r13, which is saved in SPRG_SCRATCH0.
730          */
731         mfspr   r13, SPRN_SRR0
732         addi    r13, r13, 4
733         mtspr   SPRN_SRR0, r13
734         GET_SCRATCH0(r13)
735         rfid
736         b       .
737
738 kvmppc_skip_Hinterrupt:
739         /*
740          * Here all GPRs are unchanged from when the interrupt happened
741          * except for r13, which is saved in SPRG_SCRATCH0.
742          */
743         mfspr   r13, SPRN_HSRR0
744         addi    r13, r13, 4
745         mtspr   SPRN_HSRR0, r13
746         GET_SCRATCH0(r13)
747         hrfid
748         b       .
749 #endif
750
751 /*
752  * Code from here down to __end_handlers is invoked from the
753  * exception prologs above.  Because the prologs assemble the
754  * addresses of these handlers using the LOAD_HANDLER macro,
755  * which uses an ori instruction, these handlers must be in
756  * the first 64k of the kernel image.
757  */
758
759 /*** Common interrupt handlers ***/
760
761         STD_EXCEPTION_COMMON(0x100, system_reset, system_reset_exception)
762
763         STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ)
764         STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, timer_interrupt)
765         STD_EXCEPTION_COMMON(0x980, hdecrementer, hdec_interrupt)
766 #ifdef CONFIG_PPC_DOORBELL
767         STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, doorbell_exception)
768 #else
769         STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, unknown_exception)
770 #endif
771         STD_EXCEPTION_COMMON(0xb00, trap_0b, unknown_exception)
772         STD_EXCEPTION_COMMON(0xd00, single_step, single_step_exception)
773         STD_EXCEPTION_COMMON(0xe00, trap_0e, unknown_exception)
774         STD_EXCEPTION_COMMON(0xe40, emulation_assist, emulation_assist_interrupt)
775         STD_EXCEPTION_COMMON_ASYNC(0xe60, hmi_exception, handle_hmi_exception)
776 #ifdef CONFIG_PPC_DOORBELL
777         STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, doorbell_exception)
778 #else
779         STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, unknown_exception)
780 #endif
781         STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, performance_monitor_exception)
782         STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, instruction_breakpoint_exception)
783         STD_EXCEPTION_COMMON(0x1502, denorm, unknown_exception)
784 #ifdef CONFIG_ALTIVEC
785         STD_EXCEPTION_COMMON(0x1700, altivec_assist, altivec_assist_exception)
786 #else
787         STD_EXCEPTION_COMMON(0x1700, altivec_assist, unknown_exception)
788 #endif
789 #ifdef CONFIG_CBE_RAS
790         STD_EXCEPTION_COMMON(0x1200, cbe_system_error, cbe_system_error_exception)
791         STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, cbe_maintenance_exception)
792         STD_EXCEPTION_COMMON(0x1800, cbe_thermal, cbe_thermal_exception)
793 #endif /* CONFIG_CBE_RAS */
794
795         /*
796          * Relocation-on interrupts: A subset of the interrupts can be delivered
797          * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
798          * it.  Addresses are the same as the original interrupt addresses, but
799          * offset by 0xc000000000004000.
800          * It's impossible to receive interrupts below 0x300 via this mechanism.
801          * KVM: None of these traps are from the guest ; anything that escalated
802          * to HV=1 from HV=0 is delivered via real mode handlers.
803          */
804
805         /*
806          * This uses the standard macro, since the original 0x300 vector
807          * only has extra guff for STAB-based processors -- which never
808          * come here.
809          */
810         STD_RELON_EXCEPTION_PSERIES(0x4300, 0x300, data_access)
811         . = 0x4380
812         .globl data_access_slb_relon_pSeries
813 data_access_slb_relon_pSeries:
814         SET_SCRATCH0(r13)
815         EXCEPTION_PROLOG_0(PACA_EXSLB)
816         EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380)
817         std     r3,PACA_EXSLB+EX_R3(r13)
818         mfspr   r3,SPRN_DAR
819         mfspr   r12,SPRN_SRR1
820 #ifndef CONFIG_RELOCATABLE
821         b       slb_miss_realmode
822 #else
823         /*
824          * We can't just use a direct branch to slb_miss_realmode
825          * because the distance from here to there depends on where
826          * the kernel ends up being put.
827          */
828         mfctr   r11
829         ld      r10,PACAKBASE(r13)
830         LOAD_HANDLER(r10, slb_miss_realmode)
831         mtctr   r10
832         bctr
833 #endif
834
835         STD_RELON_EXCEPTION_PSERIES(0x4400, 0x400, instruction_access)
836         . = 0x4480
837         .globl instruction_access_slb_relon_pSeries
838 instruction_access_slb_relon_pSeries:
839         SET_SCRATCH0(r13)
840         EXCEPTION_PROLOG_0(PACA_EXSLB)
841         EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480)
842         std     r3,PACA_EXSLB+EX_R3(r13)
843         mfspr   r3,SPRN_SRR0            /* SRR0 is faulting address */
844         mfspr   r12,SPRN_SRR1
845 #ifndef CONFIG_RELOCATABLE
846         b       slb_miss_realmode
847 #else
848         mfctr   r11
849         ld      r10,PACAKBASE(r13)
850         LOAD_HANDLER(r10, slb_miss_realmode)
851         mtctr   r10
852         bctr
853 #endif
854
855         . = 0x4500
856         .globl hardware_interrupt_relon_pSeries;
857         .globl hardware_interrupt_relon_hv;
858 hardware_interrupt_relon_pSeries:
859 hardware_interrupt_relon_hv:
860         BEGIN_FTR_SECTION
861                 _MASKABLE_RELON_EXCEPTION_PSERIES(0x502, hardware_interrupt, EXC_HV, SOFTEN_TEST_HV)
862         FTR_SECTION_ELSE
863                 _MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt, EXC_STD, SOFTEN_TEST_PR)
864         ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
865         STD_RELON_EXCEPTION_PSERIES(0x4600, 0x600, alignment)
866         STD_RELON_EXCEPTION_PSERIES(0x4700, 0x700, program_check)
867         STD_RELON_EXCEPTION_PSERIES(0x4800, 0x800, fp_unavailable)
868         MASKABLE_RELON_EXCEPTION_PSERIES(0x4900, 0x900, decrementer)
869         STD_RELON_EXCEPTION_HV(0x4980, 0x982, hdecrementer)
870         MASKABLE_RELON_EXCEPTION_PSERIES(0x4a00, 0xa00, doorbell_super)
871         STD_RELON_EXCEPTION_PSERIES(0x4b00, 0xb00, trap_0b)
872
873         . = 0x4c00
874         .globl system_call_relon_pSeries
875 system_call_relon_pSeries:
876         HMT_MEDIUM
877         SYSCALL_PSERIES_1
878         SYSCALL_PSERIES_2_DIRECT
879         SYSCALL_PSERIES_3
880
881         STD_RELON_EXCEPTION_PSERIES(0x4d00, 0xd00, single_step)
882
883         . = 0x4e00
884         b       .       /* Can't happen, see v2.07 Book III-S section 6.5 */
885
886         . = 0x4e20
887         b       .       /* Can't happen, see v2.07 Book III-S section 6.5 */
888
889         . = 0x4e40
890 emulation_assist_relon_trampoline:
891         SET_SCRATCH0(r13)
892         EXCEPTION_PROLOG_0(PACA_EXGEN)
893         b       emulation_assist_relon_hv
894
895         . = 0x4e60
896         b       .       /* Can't happen, see v2.07 Book III-S section 6.5 */
897
898         . = 0x4e80
899 h_doorbell_relon_trampoline:
900         SET_SCRATCH0(r13)
901         EXCEPTION_PROLOG_0(PACA_EXGEN)
902         b       h_doorbell_relon_hv
903
904         . = 0x4f00
905 performance_monitor_relon_pseries_trampoline:
906         SET_SCRATCH0(r13)
907         EXCEPTION_PROLOG_0(PACA_EXGEN)
908         b       performance_monitor_relon_pSeries
909
910         . = 0x4f20
911 altivec_unavailable_relon_pseries_trampoline:
912         SET_SCRATCH0(r13)
913         EXCEPTION_PROLOG_0(PACA_EXGEN)
914         b       altivec_unavailable_relon_pSeries
915
916         . = 0x4f40
917 vsx_unavailable_relon_pseries_trampoline:
918         SET_SCRATCH0(r13)
919         EXCEPTION_PROLOG_0(PACA_EXGEN)
920         b       vsx_unavailable_relon_pSeries
921
922         . = 0x4f60
923 facility_unavailable_relon_trampoline:
924         SET_SCRATCH0(r13)
925         EXCEPTION_PROLOG_0(PACA_EXGEN)
926         b       facility_unavailable_relon_pSeries
927
928         . = 0x4f80
929 hv_facility_unavailable_relon_trampoline:
930         SET_SCRATCH0(r13)
931         EXCEPTION_PROLOG_0(PACA_EXGEN)
932         b       hv_facility_unavailable_relon_hv
933
934         STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint)
935 #ifdef CONFIG_PPC_DENORMALISATION
936         . = 0x5500
937         b       denorm_exception_hv
938 #endif
939         STD_RELON_EXCEPTION_PSERIES(0x5700, 0x1700, altivec_assist)
940
941         /* Other future vectors */
942         .align  7
943         .globl  __end_interrupts
944 __end_interrupts:
945
946         .align  7
947 system_call_entry_direct:
948 #if defined(CONFIG_RELOCATABLE)
949         /* The first level prologue may have used LR to get here, saving
950          * orig in r10.  To save hacking/ifdeffing common code, restore here.
951          */
952         mtlr    r10
953 #endif
954 system_call_entry:
955         b       system_call_common
956
957 ppc64_runlatch_on_trampoline:
958         b       __ppc64_runlatch_on
959
960 /*
961  * Here r13 points to the paca, r9 contains the saved CR,
962  * SRR0 and SRR1 are saved in r11 and r12,
963  * r9 - r13 are saved in paca->exgen.
964  */
965         .align  7
966         .globl data_access_common
967 data_access_common:
968         mfspr   r10,SPRN_DAR
969         std     r10,PACA_EXGEN+EX_DAR(r13)
970         mfspr   r10,SPRN_DSISR
971         stw     r10,PACA_EXGEN+EX_DSISR(r13)
972         EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
973         RECONCILE_IRQ_STATE(r10, r11)
974         ld      r12,_MSR(r1)
975         ld      r3,PACA_EXGEN+EX_DAR(r13)
976         lwz     r4,PACA_EXGEN+EX_DSISR(r13)
977         li      r5,0x300
978         b       do_hash_page            /* Try to handle as hpte fault */
979
980         .align  7
981         .globl  h_data_storage_common
982 h_data_storage_common:
983         mfspr   r10,SPRN_HDAR
984         std     r10,PACA_EXGEN+EX_DAR(r13)
985         mfspr   r10,SPRN_HDSISR
986         stw     r10,PACA_EXGEN+EX_DSISR(r13)
987         EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
988         bl      save_nvgprs
989         RECONCILE_IRQ_STATE(r10, r11)
990         addi    r3,r1,STACK_FRAME_OVERHEAD
991         bl      unknown_exception
992         b       ret_from_except
993
994         .align  7
995         .globl instruction_access_common
996 instruction_access_common:
997         EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
998         RECONCILE_IRQ_STATE(r10, r11)
999         ld      r12,_MSR(r1)
1000         ld      r3,_NIP(r1)
1001         andis.  r4,r12,0x5820
1002         li      r5,0x400
1003         b       do_hash_page            /* Try to handle as hpte fault */
1004
1005         STD_EXCEPTION_COMMON(0xe20, h_instr_storage, unknown_exception)
1006
1007 /*
1008  * Here is the common SLB miss user that is used when going to virtual
1009  * mode for SLB misses, that is currently not used
1010  */
1011 #ifdef __DISABLED__
1012         .align  7
1013         .globl  slb_miss_user_common
1014 slb_miss_user_common:
1015         mflr    r10
1016         std     r3,PACA_EXGEN+EX_DAR(r13)
1017         stw     r9,PACA_EXGEN+EX_CCR(r13)
1018         std     r10,PACA_EXGEN+EX_LR(r13)
1019         std     r11,PACA_EXGEN+EX_SRR0(r13)
1020         bl      slb_allocate_user
1021
1022         ld      r10,PACA_EXGEN+EX_LR(r13)
1023         ld      r3,PACA_EXGEN+EX_R3(r13)
1024         lwz     r9,PACA_EXGEN+EX_CCR(r13)
1025         ld      r11,PACA_EXGEN+EX_SRR0(r13)
1026         mtlr    r10
1027         beq-    slb_miss_fault
1028
1029         andi.   r10,r12,MSR_RI          /* check for unrecoverable exception */
1030         beq-    unrecov_user_slb
1031         mfmsr   r10
1032
1033 .machine push
1034 .machine "power4"
1035         mtcrf   0x80,r9
1036 .machine pop
1037
1038         clrrdi  r10,r10,2               /* clear RI before setting SRR0/1 */
1039         mtmsrd  r10,1
1040
1041         mtspr   SRR0,r11
1042         mtspr   SRR1,r12
1043
1044         ld      r9,PACA_EXGEN+EX_R9(r13)
1045         ld      r10,PACA_EXGEN+EX_R10(r13)
1046         ld      r11,PACA_EXGEN+EX_R11(r13)
1047         ld      r12,PACA_EXGEN+EX_R12(r13)
1048         ld      r13,PACA_EXGEN+EX_R13(r13)
1049         rfid
1050         b       .
1051
1052 slb_miss_fault:
1053         EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
1054         ld      r4,PACA_EXGEN+EX_DAR(r13)
1055         li      r5,0
1056         std     r4,_DAR(r1)
1057         std     r5,_DSISR(r1)
1058         b       handle_page_fault
1059
1060 unrecov_user_slb:
1061         EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
1062         RECONCILE_IRQ_STATE(r10, r11)
1063         bl      save_nvgprs
1064 1:      addi    r3,r1,STACK_FRAME_OVERHEAD
1065         bl      unrecoverable_exception
1066         b       1b
1067
1068 #endif /* __DISABLED__ */
1069
1070
1071         /*
1072          * Machine check is different because we use a different
1073          * save area: PACA_EXMC instead of PACA_EXGEN.
1074          */
1075         .align  7
1076         .globl machine_check_common
1077 machine_check_common:
1078
1079         mfspr   r10,SPRN_DAR
1080         std     r10,PACA_EXGEN+EX_DAR(r13)
1081         mfspr   r10,SPRN_DSISR
1082         stw     r10,PACA_EXGEN+EX_DSISR(r13)
1083         EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
1084         FINISH_NAP
1085         RECONCILE_IRQ_STATE(r10, r11)
1086         ld      r3,PACA_EXGEN+EX_DAR(r13)
1087         lwz     r4,PACA_EXGEN+EX_DSISR(r13)
1088         std     r3,_DAR(r1)
1089         std     r4,_DSISR(r1)
1090         bl      save_nvgprs
1091         addi    r3,r1,STACK_FRAME_OVERHEAD
1092         bl      machine_check_exception
1093         b       ret_from_except
1094
1095         .align  7
1096         .globl alignment_common
1097 alignment_common:
1098         mfspr   r10,SPRN_DAR
1099         std     r10,PACA_EXGEN+EX_DAR(r13)
1100         mfspr   r10,SPRN_DSISR
1101         stw     r10,PACA_EXGEN+EX_DSISR(r13)
1102         EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
1103         ld      r3,PACA_EXGEN+EX_DAR(r13)
1104         lwz     r4,PACA_EXGEN+EX_DSISR(r13)
1105         std     r3,_DAR(r1)
1106         std     r4,_DSISR(r1)
1107         bl      save_nvgprs
1108         RECONCILE_IRQ_STATE(r10, r11)
1109         addi    r3,r1,STACK_FRAME_OVERHEAD
1110         bl      alignment_exception
1111         b       ret_from_except
1112
1113         .align  7
1114         .globl program_check_common
1115 program_check_common:
1116         EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
1117         bl      save_nvgprs
1118         RECONCILE_IRQ_STATE(r10, r11)
1119         addi    r3,r1,STACK_FRAME_OVERHEAD
1120         bl      program_check_exception
1121         b       ret_from_except
1122
1123         .align  7
1124         .globl fp_unavailable_common
1125 fp_unavailable_common:
1126         EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
1127         bne     1f                      /* if from user, just load it up */
1128         bl      save_nvgprs
1129         RECONCILE_IRQ_STATE(r10, r11)
1130         addi    r3,r1,STACK_FRAME_OVERHEAD
1131         bl      kernel_fp_unavailable_exception
1132         BUG_OPCODE
1133 1:
1134 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1135 BEGIN_FTR_SECTION
1136         /* Test if 2 TM state bits are zero.  If non-zero (ie. userspace was in
1137          * transaction), go do TM stuff
1138          */
1139         rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
1140         bne-    2f
1141 END_FTR_SECTION_IFSET(CPU_FTR_TM)
1142 #endif
1143         bl      load_up_fpu
1144         b       fast_exception_return
1145 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1146 2:      /* User process was in a transaction */
1147         bl      save_nvgprs
1148         RECONCILE_IRQ_STATE(r10, r11)
1149         addi    r3,r1,STACK_FRAME_OVERHEAD
1150         bl      fp_unavailable_tm
1151         b       ret_from_except
1152 #endif
1153         .align  7
1154         .globl altivec_unavailable_common
1155 altivec_unavailable_common:
1156         EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
1157 #ifdef CONFIG_ALTIVEC
1158 BEGIN_FTR_SECTION
1159         beq     1f
1160 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1161   BEGIN_FTR_SECTION_NESTED(69)
1162         /* Test if 2 TM state bits are zero.  If non-zero (ie. userspace was in
1163          * transaction), go do TM stuff
1164          */
1165         rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
1166         bne-    2f
1167   END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
1168 #endif
1169         bl      load_up_altivec
1170         b       fast_exception_return
1171 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1172 2:      /* User process was in a transaction */
1173         bl      save_nvgprs
1174         RECONCILE_IRQ_STATE(r10, r11)
1175         addi    r3,r1,STACK_FRAME_OVERHEAD
1176         bl      altivec_unavailable_tm
1177         b       ret_from_except
1178 #endif
1179 1:
1180 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
1181 #endif
1182         bl      save_nvgprs
1183         RECONCILE_IRQ_STATE(r10, r11)
1184         addi    r3,r1,STACK_FRAME_OVERHEAD
1185         bl      altivec_unavailable_exception
1186         b       ret_from_except
1187
1188         .align  7
1189         .globl vsx_unavailable_common
1190 vsx_unavailable_common:
1191         EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
1192 #ifdef CONFIG_VSX
1193 BEGIN_FTR_SECTION
1194         beq     1f
1195 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1196   BEGIN_FTR_SECTION_NESTED(69)
1197         /* Test if 2 TM state bits are zero.  If non-zero (ie. userspace was in
1198          * transaction), go do TM stuff
1199          */
1200         rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
1201         bne-    2f
1202   END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
1203 #endif
1204         b       load_up_vsx
1205 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1206 2:      /* User process was in a transaction */
1207         bl      save_nvgprs
1208         RECONCILE_IRQ_STATE(r10, r11)
1209         addi    r3,r1,STACK_FRAME_OVERHEAD
1210         bl      vsx_unavailable_tm
1211         b       ret_from_except
1212 #endif
1213 1:
1214 END_FTR_SECTION_IFSET(CPU_FTR_VSX)
1215 #endif
1216         bl      save_nvgprs
1217         RECONCILE_IRQ_STATE(r10, r11)
1218         addi    r3,r1,STACK_FRAME_OVERHEAD
1219         bl      vsx_unavailable_exception
1220         b       ret_from_except
1221
1222         STD_EXCEPTION_COMMON(0xf60, facility_unavailable, facility_unavailable_exception)
1223         STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, facility_unavailable_exception)
1224
1225         .align  7
1226         .globl  __end_handlers
1227 __end_handlers:
1228
1229         /* Equivalents to the above handlers for relocation-on interrupt vectors */
1230         STD_RELON_EXCEPTION_HV_OOL(0xe40, emulation_assist)
1231         MASKABLE_RELON_EXCEPTION_HV_OOL(0xe80, h_doorbell)
1232
1233         STD_RELON_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor)
1234         STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable)
1235         STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
1236         STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
1237         STD_RELON_EXCEPTION_HV_OOL(0xf80, hv_facility_unavailable)
1238
1239 #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
1240 /*
1241  * Data area reserved for FWNMI option.
1242  * This address (0x7000) is fixed by the RPA.
1243  */
1244         .= 0x7000
1245         .globl fwnmi_data_area
1246 fwnmi_data_area:
1247
1248         /* pseries and powernv need to keep the whole page from
1249          * 0x7000 to 0x8000 free for use by the firmware
1250          */
1251         . = 0x8000
1252 #endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
1253
1254         .globl hmi_exception_early
1255 hmi_exception_early:
1256         EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0xe60)
1257         mr      r10,r1                  /* Save r1                      */
1258         ld      r1,PACAEMERGSP(r13)     /* Use emergency stack          */
1259         subi    r1,r1,INT_FRAME_SIZE    /* alloc stack frame            */
1260         std     r9,_CCR(r1)             /* save CR in stackframe        */
1261         mfspr   r11,SPRN_HSRR0          /* Save HSRR0 */
1262         std     r11,_NIP(r1)            /* save HSRR0 in stackframe     */
1263         mfspr   r12,SPRN_HSRR1          /* Save SRR1 */
1264         std     r12,_MSR(r1)            /* save SRR1 in stackframe      */
1265         std     r10,0(r1)               /* make stack chain pointer     */
1266         std     r0,GPR0(r1)             /* save r0 in stackframe        */
1267         std     r10,GPR1(r1)            /* save r1 in stackframe        */
1268         EXCEPTION_PROLOG_COMMON_2(PACA_EXGEN)
1269         EXCEPTION_PROLOG_COMMON_3(0xe60)
1270         addi    r3,r1,STACK_FRAME_OVERHEAD
1271         bl      hmi_exception_realmode
1272         /* Windup the stack. */
1273         /* Move original HSRR0 and HSRR1 into the respective regs */
1274         ld      r9,_MSR(r1)
1275         mtspr   SPRN_HSRR1,r9
1276         ld      r3,_NIP(r1)
1277         mtspr   SPRN_HSRR0,r3
1278         ld      r9,_CTR(r1)
1279         mtctr   r9
1280         ld      r9,_XER(r1)
1281         mtxer   r9
1282         ld      r9,_LINK(r1)
1283         mtlr    r9
1284         REST_GPR(0, r1)
1285         REST_8GPRS(2, r1)
1286         REST_GPR(10, r1)
1287         ld      r11,_CCR(r1)
1288         mtcr    r11
1289         REST_GPR(11, r1)
1290         REST_2GPRS(12, r1)
1291         /* restore original r1. */
1292         ld      r1,GPR1(r1)
1293
1294         /*
1295          * Go to virtual mode and pull the HMI event information from
1296          * firmware.
1297          */
1298         .globl hmi_exception_after_realmode
1299 hmi_exception_after_realmode:
1300         SET_SCRATCH0(r13)
1301         EXCEPTION_PROLOG_0(PACA_EXGEN)
1302         b       hmi_exception_hv
1303
1304 #ifdef CONFIG_PPC_POWERNV
1305 _GLOBAL(opal_mc_secondary_handler)
1306         HMT_MEDIUM_PPR_DISCARD
1307         SET_SCRATCH0(r13)
1308         GET_PACA(r13)
1309         clrldi  r3,r3,2
1310         tovirt(r3,r3)
1311         std     r3,PACA_OPAL_MC_EVT(r13)
1312         ld      r13,OPAL_MC_SRR0(r3)
1313         mtspr   SPRN_SRR0,r13
1314         ld      r13,OPAL_MC_SRR1(r3)
1315         mtspr   SPRN_SRR1,r13
1316         ld      r3,OPAL_MC_GPR3(r3)
1317         GET_SCRATCH0(r13)
1318         b       machine_check_pSeries
1319 #endif /* CONFIG_PPC_POWERNV */
1320
1321
1322 #define MACHINE_CHECK_HANDLER_WINDUP                    \
1323         /* Clear MSR_RI before setting SRR0 and SRR1. */\
1324         li      r0,MSR_RI;                              \
1325         mfmsr   r9;             /* get MSR value */     \
1326         andc    r9,r9,r0;                               \
1327         mtmsrd  r9,1;           /* Clear MSR_RI */      \
1328         /* Move original SRR0 and SRR1 into the respective regs */      \
1329         ld      r9,_MSR(r1);                            \
1330         mtspr   SPRN_SRR1,r9;                           \
1331         ld      r3,_NIP(r1);                            \
1332         mtspr   SPRN_SRR0,r3;                           \
1333         ld      r9,_CTR(r1);                            \
1334         mtctr   r9;                                     \
1335         ld      r9,_XER(r1);                            \
1336         mtxer   r9;                                     \
1337         ld      r9,_LINK(r1);                           \
1338         mtlr    r9;                                     \
1339         REST_GPR(0, r1);                                \
1340         REST_8GPRS(2, r1);                              \
1341         REST_GPR(10, r1);                               \
1342         ld      r11,_CCR(r1);                           \
1343         mtcr    r11;                                    \
1344         /* Decrement paca->in_mce. */                   \
1345         lhz     r12,PACA_IN_MCE(r13);                   \
1346         subi    r12,r12,1;                              \
1347         sth     r12,PACA_IN_MCE(r13);                   \
1348         REST_GPR(11, r1);                               \
1349         REST_2GPRS(12, r1);                             \
1350         /* restore original r1. */                      \
1351         ld      r1,GPR1(r1)
1352
1353         /*
1354          * Handle machine check early in real mode. We come here with
1355          * ME=1, MMU (IR=0 and DR=0) off and using MC emergency stack.
1356          */
1357         .align  7
1358         .globl machine_check_handle_early
1359 machine_check_handle_early:
1360         std     r0,GPR0(r1)     /* Save r0 */
1361         EXCEPTION_PROLOG_COMMON_3(0x200)
1362         bl      save_nvgprs
1363         addi    r3,r1,STACK_FRAME_OVERHEAD
1364         bl      machine_check_early
1365         std     r3,RESULT(r1)   /* Save result */
1366         ld      r12,_MSR(r1)
1367 #ifdef  CONFIG_PPC_P7_NAP
1368         /*
1369          * Check if thread was in power saving mode. We come here when any
1370          * of the following is true:
1371          * a. thread wasn't in power saving mode
1372          * b. thread was in power saving mode with no state loss or
1373          *    supervisor state loss
1374          *
1375          * Go back to nap again if (b) is true.
1376          */
1377         rlwinm. r11,r12,47-31,30,31     /* Was it in power saving mode? */
1378         beq     4f                      /* No, it wasn;t */
1379         /* Thread was in power saving mode. Go back to nap again. */
1380         cmpwi   r11,2
1381         bne     3f
1382         /* Supervisor state loss */
1383         li      r0,1
1384         stb     r0,PACA_NAPSTATELOST(r13)
1385 3:      bl      machine_check_queue_event
1386         MACHINE_CHECK_HANDLER_WINDUP
1387         GET_PACA(r13)
1388         ld      r1,PACAR1(r13)
1389         b       power7_enter_nap_mode
1390 4:
1391 #endif
1392         /*
1393          * Check if we are coming from hypervisor userspace. If yes then we
1394          * continue in host kernel in V mode to deliver the MC event.
1395          */
1396         rldicl. r11,r12,4,63            /* See if MC hit while in HV mode. */
1397         beq     5f
1398         andi.   r11,r12,MSR_PR          /* See if coming from user. */
1399         bne     9f                      /* continue in V mode if we are. */
1400
1401 5:
1402 #ifdef CONFIG_KVM_BOOK3S_64_HV
1403         /*
1404          * We are coming from kernel context. Check if we are coming from
1405          * guest. if yes, then we can continue. We will fall through
1406          * do_kvm_200->kvmppc_interrupt to deliver the MC event to guest.
1407          */
1408         lbz     r11,HSTATE_IN_GUEST(r13)
1409         cmpwi   r11,0                   /* Check if coming from guest */
1410         bne     9f                      /* continue if we are. */
1411 #endif
1412         /*
1413          * At this point we are not sure about what context we come from.
1414          * Queue up the MCE event and return from the interrupt.
1415          * But before that, check if this is an un-recoverable exception.
1416          * If yes, then stay on emergency stack and panic.
1417          */
1418         andi.   r11,r12,MSR_RI
1419         bne     2f
1420 1:      mfspr   r11,SPRN_SRR0
1421         ld      r10,PACAKBASE(r13)
1422         LOAD_HANDLER(r10,unrecover_mce)
1423         mtspr   SPRN_SRR0,r10
1424         ld      r10,PACAKMSR(r13)
1425         /*
1426          * We are going down. But there are chances that we might get hit by
1427          * another MCE during panic path and we may run into unstable state
1428          * with no way out. Hence, turn ME bit off while going down, so that
1429          * when another MCE is hit during panic path, system will checkstop
1430          * and hypervisor will get restarted cleanly by SP.
1431          */
1432         li      r3,MSR_ME
1433         andc    r10,r10,r3              /* Turn off MSR_ME */
1434         mtspr   SPRN_SRR1,r10
1435         rfid
1436         b       .
1437 2:
1438         /*
1439          * Check if we have successfully handled/recovered from error, if not
1440          * then stay on emergency stack and panic.
1441          */
1442         ld      r3,RESULT(r1)   /* Load result */
1443         cmpdi   r3,0            /* see if we handled MCE successfully */
1444
1445         beq     1b              /* if !handled then panic */
1446         /*
1447          * Return from MC interrupt.
1448          * Queue up the MCE event so that we can log it later, while
1449          * returning from kernel or opal call.
1450          */
1451         bl      machine_check_queue_event
1452         MACHINE_CHECK_HANDLER_WINDUP
1453         rfid
1454 9:
1455         /* Deliver the machine check to host kernel in V mode. */
1456         MACHINE_CHECK_HANDLER_WINDUP
1457         b       machine_check_pSeries
1458
1459 unrecover_mce:
1460         /* Invoke machine_check_exception to print MCE event and panic. */
1461         addi    r3,r1,STACK_FRAME_OVERHEAD
1462         bl      machine_check_exception
1463         /*
1464          * We will not reach here. Even if we did, there is no way out. Call
1465          * unrecoverable_exception and die.
1466          */
1467 1:      addi    r3,r1,STACK_FRAME_OVERHEAD
1468         bl      unrecoverable_exception
1469         b       1b
1470 /*
1471  * r13 points to the PACA, r9 contains the saved CR,
1472  * r12 contain the saved SRR1, SRR0 is still ready for return
1473  * r3 has the faulting address
1474  * r9 - r13 are saved in paca->exslb.
1475  * r3 is saved in paca->slb_r3
1476  * We assume we aren't going to take any exceptions during this procedure.
1477  */
1478 slb_miss_realmode:
1479         mflr    r10
1480 #ifdef CONFIG_RELOCATABLE
1481         mtctr   r11
1482 #endif
1483
1484         stw     r9,PACA_EXSLB+EX_CCR(r13)       /* save CR in exc. frame */
1485         std     r10,PACA_EXSLB+EX_LR(r13)       /* save LR */
1486
1487         bl      slb_allocate_realmode
1488
1489         /* All done -- return from exception. */
1490
1491         ld      r10,PACA_EXSLB+EX_LR(r13)
1492         ld      r3,PACA_EXSLB+EX_R3(r13)
1493         lwz     r9,PACA_EXSLB+EX_CCR(r13)       /* get saved CR */
1494
1495         mtlr    r10
1496
1497         andi.   r10,r12,MSR_RI  /* check for unrecoverable exception */
1498         beq-    2f
1499
1500 .machine        push
1501 .machine        "power4"
1502         mtcrf   0x80,r9
1503         mtcrf   0x01,r9         /* slb_allocate uses cr0 and cr7 */
1504 .machine        pop
1505
1506         RESTORE_PPR_PACA(PACA_EXSLB, r9)
1507         ld      r9,PACA_EXSLB+EX_R9(r13)
1508         ld      r10,PACA_EXSLB+EX_R10(r13)
1509         ld      r11,PACA_EXSLB+EX_R11(r13)
1510         ld      r12,PACA_EXSLB+EX_R12(r13)
1511         ld      r13,PACA_EXSLB+EX_R13(r13)
1512         rfid
1513         b       .       /* prevent speculative execution */
1514
1515 2:      mfspr   r11,SPRN_SRR0
1516         ld      r10,PACAKBASE(r13)
1517         LOAD_HANDLER(r10,unrecov_slb)
1518         mtspr   SPRN_SRR0,r10
1519         ld      r10,PACAKMSR(r13)
1520         mtspr   SPRN_SRR1,r10
1521         rfid
1522         b       .
1523
1524 unrecov_slb:
1525         EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
1526         RECONCILE_IRQ_STATE(r10, r11)
1527         bl      save_nvgprs
1528 1:      addi    r3,r1,STACK_FRAME_OVERHEAD
1529         bl      unrecoverable_exception
1530         b       1b
1531
1532
1533 #ifdef CONFIG_PPC_970_NAP
1534 power4_fixup_nap:
1535         andc    r9,r9,r10
1536         std     r9,TI_LOCAL_FLAGS(r11)
1537         ld      r10,_LINK(r1)           /* make idle task do the */
1538         std     r10,_NIP(r1)            /* equivalent of a blr */
1539         blr
1540 #endif
1541
1542 /*
1543  * Hash table stuff
1544  */
1545         .align  7
1546 do_hash_page:
1547         std     r3,_DAR(r1)
1548         std     r4,_DSISR(r1)
1549
1550         andis.  r0,r4,0xa410            /* weird error? */
1551         bne-    handle_page_fault       /* if not, try to insert a HPTE */
1552         andis.  r0,r4,DSISR_DABRMATCH@h
1553         bne-    handle_dabr_fault
1554         CURRENT_THREAD_INFO(r11, r1)
1555         lwz     r0,TI_PREEMPT(r11)      /* If we're in an "NMI" */
1556         andis.  r0,r0,NMI_MASK@h        /* (i.e. an irq when soft-disabled) */
1557         bne     77f                     /* then don't call hash_page now */
1558         /*
1559          * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
1560          * accessing a userspace segment (even from the kernel). We assume
1561          * kernel addresses always have the high bit set.
1562          */
1563         rlwinm  r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */
1564         rotldi  r0,r3,15                /* Move high bit into MSR_PR posn */
1565         orc     r0,r12,r0               /* MSR_PR | ~high_bit */
1566         rlwimi  r4,r0,32-13,30,30       /* becomes _PAGE_USER access bit */
1567         ori     r4,r4,1                 /* add _PAGE_PRESENT */
1568         rlwimi  r4,r5,22+2,31-2,31-2    /* Set _PAGE_EXEC if trap is 0x400 */
1569
1570         /*
1571          * r3 contains the faulting address
1572          * r4 contains the required access permissions
1573          * r5 contains the trap number
1574          *
1575          * at return r3 = 0 for success, 1 for page fault, negative for error
1576          */
1577         bl      hash_page               /* build HPTE if possible */
1578         cmpdi   r3,0                    /* see if hash_page succeeded */
1579
1580         /* Success */
1581         beq     fast_exc_return_irq     /* Return from exception on success */
1582
1583         /* Error */
1584         blt-    13f
1585
1586 /* Here we have a page fault that hash_page can't handle. */
1587 handle_page_fault:
1588 11:     ld      r4,_DAR(r1)
1589         ld      r5,_DSISR(r1)
1590         addi    r3,r1,STACK_FRAME_OVERHEAD
1591         bl      do_page_fault
1592         cmpdi   r3,0
1593         beq+    12f
1594         bl      save_nvgprs
1595         mr      r5,r3
1596         addi    r3,r1,STACK_FRAME_OVERHEAD
1597         lwz     r4,_DAR(r1)
1598         bl      bad_page_fault
1599         b       ret_from_except
1600
1601 /* We have a data breakpoint exception - handle it */
1602 handle_dabr_fault:
1603         bl      save_nvgprs
1604         ld      r4,_DAR(r1)
1605         ld      r5,_DSISR(r1)
1606         addi    r3,r1,STACK_FRAME_OVERHEAD
1607         bl      do_break
1608 12:     b       ret_from_except_lite
1609
1610
1611 /* We have a page fault that hash_page could handle but HV refused
1612  * the PTE insertion
1613  */
1614 13:     bl      save_nvgprs
1615         mr      r5,r3
1616         addi    r3,r1,STACK_FRAME_OVERHEAD
1617         ld      r4,_DAR(r1)
1618         bl      low_hash_fault
1619         b       ret_from_except
1620
1621 /*
1622  * We come here as a result of a DSI at a point where we don't want
1623  * to call hash_page, such as when we are accessing memory (possibly
1624  * user memory) inside a PMU interrupt that occurred while interrupts
1625  * were soft-disabled.  We want to invoke the exception handler for
1626  * the access, or panic if there isn't a handler.
1627  */
1628 77:     bl      save_nvgprs
1629         mr      r4,r3
1630         addi    r3,r1,STACK_FRAME_OVERHEAD
1631         li      r5,SIGSEGV
1632         bl      bad_page_fault
1633         b       ret_from_except
1634
1635 /*
1636  * Here we have detected that the kernel stack pointer is bad.
1637  * R9 contains the saved CR, r13 points to the paca,
1638  * r10 contains the (bad) kernel stack pointer,
1639  * r11 and r12 contain the saved SRR0 and SRR1.
1640  * We switch to using an emergency stack, save the registers there,
1641  * and call kernel_bad_stack(), which panics.
1642  */
1643 bad_stack:
1644         ld      r1,PACAEMERGSP(r13)
1645         subi    r1,r1,64+INT_FRAME_SIZE
1646         std     r9,_CCR(r1)
1647         std     r10,GPR1(r1)
1648         std     r11,_NIP(r1)
1649         std     r12,_MSR(r1)
1650         mfspr   r11,SPRN_DAR
1651         mfspr   r12,SPRN_DSISR
1652         std     r11,_DAR(r1)
1653         std     r12,_DSISR(r1)
1654         mflr    r10
1655         mfctr   r11
1656         mfxer   r12
1657         std     r10,_LINK(r1)
1658         std     r11,_CTR(r1)
1659         std     r12,_XER(r1)
1660         SAVE_GPR(0,r1)
1661         SAVE_GPR(2,r1)
1662         ld      r10,EX_R3(r3)
1663         std     r10,GPR3(r1)
1664         SAVE_GPR(4,r1)
1665         SAVE_4GPRS(5,r1)
1666         ld      r9,EX_R9(r3)
1667         ld      r10,EX_R10(r3)
1668         SAVE_2GPRS(9,r1)
1669         ld      r9,EX_R11(r3)
1670         ld      r10,EX_R12(r3)
1671         ld      r11,EX_R13(r3)
1672         std     r9,GPR11(r1)
1673         std     r10,GPR12(r1)
1674         std     r11,GPR13(r1)
1675 BEGIN_FTR_SECTION
1676         ld      r10,EX_CFAR(r3)
1677         std     r10,ORIG_GPR3(r1)
1678 END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
1679         SAVE_8GPRS(14,r1)
1680         SAVE_10GPRS(22,r1)
1681         lhz     r12,PACA_TRAP_SAVE(r13)
1682         std     r12,_TRAP(r1)
1683         addi    r11,r1,INT_FRAME_SIZE
1684         std     r11,0(r1)
1685         li      r12,0
1686         std     r12,0(r11)
1687         ld      r2,PACATOC(r13)
1688         ld      r11,exception_marker@toc(r2)
1689         std     r12,RESULT(r1)
1690         std     r11,STACK_FRAME_OVERHEAD-16(r1)
1691 1:      addi    r3,r1,STACK_FRAME_OVERHEAD
1692         bl      kernel_bad_stack
1693         b       1b