tile: remove HUGE_VMAP dead code
[cascardo/linux.git] / arch / tile / mm / fault.c
1 /*
2  * Copyright 2010 Tilera Corporation. All Rights Reserved.
3  *
4  *   This program is free software; you can redistribute it and/or
5  *   modify it under the terms of the GNU General Public License
6  *   as published by the Free Software Foundation, version 2.
7  *
8  *   This program is distributed in the hope that it will be useful, but
9  *   WITHOUT ANY WARRANTY; without even the implied warranty of
10  *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
11  *   NON INFRINGEMENT.  See the GNU General Public License for
12  *   more details.
13  *
14  * From i386 code copyright (C) 1995  Linus Torvalds
15  */
16
17 #include <linux/signal.h>
18 #include <linux/sched.h>
19 #include <linux/kernel.h>
20 #include <linux/errno.h>
21 #include <linux/string.h>
22 #include <linux/types.h>
23 #include <linux/ptrace.h>
24 #include <linux/mman.h>
25 #include <linux/mm.h>
26 #include <linux/smp.h>
27 #include <linux/interrupt.h>
28 #include <linux/init.h>
29 #include <linux/tty.h>
30 #include <linux/vt_kern.h>              /* For unblank_screen() */
31 #include <linux/highmem.h>
32 #include <linux/module.h>
33 #include <linux/kprobes.h>
34 #include <linux/hugetlb.h>
35 #include <linux/syscalls.h>
36 #include <linux/uaccess.h>
37 #include <linux/kdebug.h>
38
39 #include <asm/pgalloc.h>
40 #include <asm/sections.h>
41 #include <asm/traps.h>
42 #include <asm/syscalls.h>
43
44 #include <arch/interrupts.h>
45
46 static noinline void force_sig_info_fault(const char *type, int si_signo,
47                                           int si_code, unsigned long address,
48                                           int fault_num,
49                                           struct task_struct *tsk,
50                                           struct pt_regs *regs)
51 {
52         siginfo_t info;
53
54         if (unlikely(tsk->pid < 2)) {
55                 panic("Signal %d (code %d) at %#lx sent to %s!",
56                       si_signo, si_code & 0xffff, address,
57                       is_idle_task(tsk) ? "the idle task" : "init");
58         }
59
60         info.si_signo = si_signo;
61         info.si_errno = 0;
62         info.si_code = si_code;
63         info.si_addr = (void __user *)address;
64         info.si_trapno = fault_num;
65         trace_unhandled_signal(type, regs, address, si_signo);
66         force_sig_info(si_signo, &info, tsk);
67 }
68
69 #ifndef __tilegx__
70 /*
71  * Synthesize the fault a PL0 process would get by doing a word-load of
72  * an unaligned address or a high kernel address.
73  */
74 SYSCALL_DEFINE1(cmpxchg_badaddr, unsigned long, address)
75 {
76         struct pt_regs *regs = current_pt_regs();
77
78         if (address >= PAGE_OFFSET)
79                 force_sig_info_fault("atomic segfault", SIGSEGV, SEGV_MAPERR,
80                                      address, INT_DTLB_MISS, current, regs);
81         else
82                 force_sig_info_fault("atomic alignment fault", SIGBUS,
83                                      BUS_ADRALN, address,
84                                      INT_UNALIGN_DATA, current, regs);
85
86         /*
87          * Adjust pc to point at the actual instruction, which is unusual
88          * for syscalls normally, but is appropriate when we are claiming
89          * that a syscall swint1 caused a page fault or bus error.
90          */
91         regs->pc -= 8;
92
93         /*
94          * Mark this as a caller-save interrupt, like a normal page fault,
95          * so that when we go through the signal handler path we will
96          * properly restore r0, r1, and r2 for the signal handler arguments.
97          */
98         regs->flags |= PT_FLAGS_CALLER_SAVES;
99
100         return 0;
101 }
102 #endif
103
104 static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
105 {
106         unsigned index = pgd_index(address);
107         pgd_t *pgd_k;
108         pud_t *pud, *pud_k;
109         pmd_t *pmd, *pmd_k;
110
111         pgd += index;
112         pgd_k = init_mm.pgd + index;
113
114         if (!pgd_present(*pgd_k))
115                 return NULL;
116
117         pud = pud_offset(pgd, address);
118         pud_k = pud_offset(pgd_k, address);
119         if (!pud_present(*pud_k))
120                 return NULL;
121
122         pmd = pmd_offset(pud, address);
123         pmd_k = pmd_offset(pud_k, address);
124         if (!pmd_present(*pmd_k))
125                 return NULL;
126         if (!pmd_present(*pmd))
127                 set_pmd(pmd, *pmd_k);
128         else
129                 BUG_ON(pmd_ptfn(*pmd) != pmd_ptfn(*pmd_k));
130         return pmd_k;
131 }
132
133 /*
134  * Handle a fault on the vmalloc area.
135  */
136 static inline int vmalloc_fault(pgd_t *pgd, unsigned long address)
137 {
138         pmd_t *pmd_k;
139         pte_t *pte_k;
140
141         /* Make sure we are in vmalloc area */
142         if (!(address >= VMALLOC_START && address < VMALLOC_END))
143                 return -1;
144
145         /*
146          * Synchronize this task's top level page-table
147          * with the 'reference' page table.
148          */
149         pmd_k = vmalloc_sync_one(pgd, address);
150         if (!pmd_k)
151                 return -1;
152         pte_k = pte_offset_kernel(pmd_k, address);
153         if (!pte_present(*pte_k))
154                 return -1;
155         return 0;
156 }
157
158 /* Wait until this PTE has completed migration. */
159 static void wait_for_migration(pte_t *pte)
160 {
161         if (pte_migrating(*pte)) {
162                 /*
163                  * Wait until the migrater fixes up this pte.
164                  * We scale the loop count by the clock rate so we'll wait for
165                  * a few seconds here.
166                  */
167                 int retries = 0;
168                 int bound = get_clock_rate();
169                 while (pte_migrating(*pte)) {
170                         barrier();
171                         if (++retries > bound)
172                                 panic("Hit migrating PTE (%#llx) and"
173                                       " page PFN %#lx still migrating",
174                                       pte->val, pte_pfn(*pte));
175                 }
176         }
177 }
178
179 /*
180  * It's not generally safe to use "current" to get the page table pointer,
181  * since we might be running an oprofile interrupt in the middle of a
182  * task switch.
183  */
184 static pgd_t *get_current_pgd(void)
185 {
186         HV_Context ctx = hv_inquire_context();
187         unsigned long pgd_pfn = ctx.page_table >> PAGE_SHIFT;
188         struct page *pgd_page = pfn_to_page(pgd_pfn);
189         BUG_ON(PageHighMem(pgd_page));
190         return (pgd_t *) __va(ctx.page_table);
191 }
192
193 /*
194  * We can receive a page fault from a migrating PTE at any time.
195  * Handle it by just waiting until the fault resolves.
196  *
197  * It's also possible to get a migrating kernel PTE that resolves
198  * itself during the downcall from hypervisor to Linux.  We just check
199  * here to see if the PTE seems valid, and if so we retry it.
200  *
201  * NOTE! We MUST NOT take any locks for this case.  We may be in an
202  * interrupt or a critical region, and must do as little as possible.
203  * Similarly, we can't use atomic ops here, since we may be handling a
204  * fault caused by an atomic op access.
205  *
206  * If we find a migrating PTE while we're in an NMI context, and we're
207  * at a PC that has a registered exception handler, we don't wait,
208  * since this thread may (e.g.) have been interrupted while migrating
209  * its own stack, which would then cause us to self-deadlock.
210  */
211 static int handle_migrating_pte(pgd_t *pgd, int fault_num,
212                                 unsigned long address, unsigned long pc,
213                                 int is_kernel_mode, int write)
214 {
215         pud_t *pud;
216         pmd_t *pmd;
217         pte_t *pte;
218         pte_t pteval;
219
220         if (pgd_addr_invalid(address))
221                 return 0;
222
223         pgd += pgd_index(address);
224         pud = pud_offset(pgd, address);
225         if (!pud || !pud_present(*pud))
226                 return 0;
227         pmd = pmd_offset(pud, address);
228         if (!pmd || !pmd_present(*pmd))
229                 return 0;
230         pte = pmd_huge_page(*pmd) ? ((pte_t *)pmd) :
231                 pte_offset_kernel(pmd, address);
232         pteval = *pte;
233         if (pte_migrating(pteval)) {
234                 if (in_nmi() && search_exception_tables(pc))
235                         return 0;
236                 wait_for_migration(pte);
237                 return 1;
238         }
239
240         if (!is_kernel_mode || !pte_present(pteval))
241                 return 0;
242         if (fault_num == INT_ITLB_MISS) {
243                 if (pte_exec(pteval))
244                         return 1;
245         } else if (write) {
246                 if (pte_write(pteval))
247                         return 1;
248         } else {
249                 if (pte_read(pteval))
250                         return 1;
251         }
252
253         return 0;
254 }
255
256 /*
257  * This routine is responsible for faulting in user pages.
258  * It passes the work off to one of the appropriate routines.
259  * It returns true if the fault was successfully handled.
260  */
261 static int handle_page_fault(struct pt_regs *regs,
262                              int fault_num,
263                              int is_page_fault,
264                              unsigned long address,
265                              int write)
266 {
267         struct task_struct *tsk;
268         struct mm_struct *mm;
269         struct vm_area_struct *vma;
270         unsigned long stack_offset;
271         int fault;
272         int si_code;
273         int is_kernel_mode;
274         pgd_t *pgd;
275         unsigned int flags;
276
277         /* on TILE, protection faults are always writes */
278         if (!is_page_fault)
279                 write = 1;
280
281         flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
282
283         is_kernel_mode = !user_mode(regs);
284
285         tsk = validate_current();
286
287         /*
288          * Check to see if we might be overwriting the stack, and bail
289          * out if so.  The page fault code is a relatively likely
290          * place to get trapped in an infinite regress, and once we
291          * overwrite the whole stack, it becomes very hard to recover.
292          */
293         stack_offset = stack_pointer & (THREAD_SIZE-1);
294         if (stack_offset < THREAD_SIZE / 8) {
295                 pr_alert("Potential stack overrun: sp %#lx\n",
296                        stack_pointer);
297                 show_regs(regs);
298                 pr_alert("Killing current process %d/%s\n",
299                        tsk->pid, tsk->comm);
300                 do_group_exit(SIGKILL);
301         }
302
303         /*
304          * Early on, we need to check for migrating PTE entries;
305          * see homecache.c.  If we find a migrating PTE, we wait until
306          * the backing page claims to be done migrating, then we proceed.
307          * For kernel PTEs, we rewrite the PTE and return and retry.
308          * Otherwise, we treat the fault like a normal "no PTE" fault,
309          * rather than trying to patch up the existing PTE.
310          */
311         pgd = get_current_pgd();
312         if (handle_migrating_pte(pgd, fault_num, address, regs->pc,
313                                  is_kernel_mode, write))
314                 return 1;
315
316         si_code = SEGV_MAPERR;
317
318         /*
319          * We fault-in kernel-space virtual memory on-demand. The
320          * 'reference' page table is init_mm.pgd.
321          *
322          * NOTE! We MUST NOT take any locks for this case. We may
323          * be in an interrupt or a critical region, and should
324          * only copy the information from the master page table,
325          * nothing more.
326          *
327          * This verifies that the fault happens in kernel space
328          * and that the fault was not a protection fault.
329          */
330         if (unlikely(address >= TASK_SIZE &&
331                      !is_arch_mappable_range(address, 0))) {
332                 if (is_kernel_mode && is_page_fault &&
333                     vmalloc_fault(pgd, address) >= 0)
334                         return 1;
335                 /*
336                  * Don't take the mm semaphore here. If we fixup a prefetch
337                  * fault we could otherwise deadlock.
338                  */
339                 mm = NULL;  /* happy compiler */
340                 vma = NULL;
341                 goto bad_area_nosemaphore;
342         }
343
344         /*
345          * If we're trying to touch user-space addresses, we must
346          * be either at PL0, or else with interrupts enabled in the
347          * kernel, so either way we can re-enable interrupts here
348          * unless we are doing atomic access to user space with
349          * interrupts disabled.
350          */
351         if (!(regs->flags & PT_FLAGS_DISABLE_IRQ))
352                 local_irq_enable();
353
354         mm = tsk->mm;
355
356         /*
357          * If we're in an interrupt, have no user context or are running in an
358          * atomic region then we must not take the fault.
359          */
360         if (in_atomic() || !mm) {
361                 vma = NULL;  /* happy compiler */
362                 goto bad_area_nosemaphore;
363         }
364
365         if (!is_kernel_mode)
366                 flags |= FAULT_FLAG_USER;
367
368         /*
369          * When running in the kernel we expect faults to occur only to
370          * addresses in user space.  All other faults represent errors in the
371          * kernel and should generate an OOPS.  Unfortunately, in the case of an
372          * erroneous fault occurring in a code path which already holds mmap_sem
373          * we will deadlock attempting to validate the fault against the
374          * address space.  Luckily the kernel only validly references user
375          * space from well defined areas of code, which are listed in the
376          * exceptions table.
377          *
378          * As the vast majority of faults will be valid we will only perform
379          * the source reference check when there is a possibility of a deadlock.
380          * Attempt to lock the address space, if we cannot we then validate the
381          * source.  If this is invalid we can skip the address space check,
382          * thus avoiding the deadlock.
383          */
384         if (!down_read_trylock(&mm->mmap_sem)) {
385                 if (is_kernel_mode &&
386                     !search_exception_tables(regs->pc)) {
387                         vma = NULL;  /* happy compiler */
388                         goto bad_area_nosemaphore;
389                 }
390
391 retry:
392                 down_read(&mm->mmap_sem);
393         }
394
395         vma = find_vma(mm, address);
396         if (!vma)
397                 goto bad_area;
398         if (vma->vm_start <= address)
399                 goto good_area;
400         if (!(vma->vm_flags & VM_GROWSDOWN))
401                 goto bad_area;
402         if (regs->sp < PAGE_OFFSET) {
403                 /*
404                  * accessing the stack below sp is always a bug.
405                  */
406                 if (address < regs->sp)
407                         goto bad_area;
408         }
409         if (expand_stack(vma, address))
410                 goto bad_area;
411
412 /*
413  * Ok, we have a good vm_area for this memory access, so
414  * we can handle it..
415  */
416 good_area:
417         si_code = SEGV_ACCERR;
418         if (fault_num == INT_ITLB_MISS) {
419                 if (!(vma->vm_flags & VM_EXEC))
420                         goto bad_area;
421         } else if (write) {
422 #ifdef TEST_VERIFY_AREA
423                 if (!is_page_fault && regs->cs == KERNEL_CS)
424                         pr_err("WP fault at "REGFMT"\n", regs->eip);
425 #endif
426                 if (!(vma->vm_flags & VM_WRITE))
427                         goto bad_area;
428                 flags |= FAULT_FLAG_WRITE;
429         } else {
430                 if (!is_page_fault || !(vma->vm_flags & VM_READ))
431                         goto bad_area;
432         }
433
434         /*
435          * If for any reason at all we couldn't handle the fault,
436          * make sure we exit gracefully rather than endlessly redo
437          * the fault.
438          */
439         fault = handle_mm_fault(mm, vma, address, flags);
440
441         if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
442                 return 0;
443
444         if (unlikely(fault & VM_FAULT_ERROR)) {
445                 if (fault & VM_FAULT_OOM)
446                         goto out_of_memory;
447                 else if (fault & VM_FAULT_SIGBUS)
448                         goto do_sigbus;
449                 BUG();
450         }
451         if (flags & FAULT_FLAG_ALLOW_RETRY) {
452                 if (fault & VM_FAULT_MAJOR)
453                         tsk->maj_flt++;
454                 else
455                         tsk->min_flt++;
456                 if (fault & VM_FAULT_RETRY) {
457                         flags &= ~FAULT_FLAG_ALLOW_RETRY;
458                         flags |= FAULT_FLAG_TRIED;
459
460                          /*
461                           * No need to up_read(&mm->mmap_sem) as we would
462                           * have already released it in __lock_page_or_retry
463                           * in mm/filemap.c.
464                           */
465                         goto retry;
466                 }
467         }
468
469 #if CHIP_HAS_TILE_DMA()
470         /* If this was a DMA TLB fault, restart the DMA engine. */
471         switch (fault_num) {
472         case INT_DMATLB_MISS:
473         case INT_DMATLB_MISS_DWNCL:
474         case INT_DMATLB_ACCESS:
475         case INT_DMATLB_ACCESS_DWNCL:
476                 __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK);
477                 break;
478         }
479 #endif
480
481         up_read(&mm->mmap_sem);
482         return 1;
483
484 /*
485  * Something tried to access memory that isn't in our memory map..
486  * Fix it, but check if it's kernel or user first..
487  */
488 bad_area:
489         up_read(&mm->mmap_sem);
490
491 bad_area_nosemaphore:
492         /* User mode accesses just cause a SIGSEGV */
493         if (!is_kernel_mode) {
494                 /*
495                  * It's possible to have interrupts off here.
496                  */
497                 local_irq_enable();
498
499                 force_sig_info_fault("segfault", SIGSEGV, si_code, address,
500                                      fault_num, tsk, regs);
501                 return 0;
502         }
503
504 no_context:
505         /* Are we prepared to handle this kernel fault?  */
506         if (fixup_exception(regs))
507                 return 0;
508
509 /*
510  * Oops. The kernel tried to access some bad page. We'll have to
511  * terminate things with extreme prejudice.
512  */
513
514         bust_spinlocks(1);
515
516         /* FIXME: no lookup_address() yet */
517 #ifdef SUPPORT_LOOKUP_ADDRESS
518         if (fault_num == INT_ITLB_MISS) {
519                 pte_t *pte = lookup_address(address);
520
521                 if (pte && pte_present(*pte) && !pte_exec_kernel(*pte))
522                         pr_crit("kernel tried to execute"
523                                " non-executable page - exploit attempt?"
524                                " (uid: %d)\n", current->uid);
525         }
526 #endif
527         if (address < PAGE_SIZE)
528                 pr_alert("Unable to handle kernel NULL pointer dereference\n");
529         else
530                 pr_alert("Unable to handle kernel paging request\n");
531         pr_alert(" at virtual address "REGFMT", pc "REGFMT"\n",
532                  address, regs->pc);
533
534         show_regs(regs);
535
536         if (unlikely(tsk->pid < 2)) {
537                 panic("Kernel page fault running %s!",
538                       is_idle_task(tsk) ? "the idle task" : "init");
539         }
540
541         /*
542          * More FIXME: we should probably copy the i386 here and
543          * implement a generic die() routine.  Not today.
544          */
545 #ifdef SUPPORT_DIE
546         die("Oops", regs);
547 #endif
548         bust_spinlocks(1);
549
550         do_group_exit(SIGKILL);
551
552 /*
553  * We ran out of memory, or some other thing happened to us that made
554  * us unable to handle the page fault gracefully.
555  */
556 out_of_memory:
557         up_read(&mm->mmap_sem);
558         if (is_kernel_mode)
559                 goto no_context;
560         pagefault_out_of_memory();
561         return 0;
562
563 do_sigbus:
564         up_read(&mm->mmap_sem);
565
566         /* Kernel mode? Handle exceptions or die */
567         if (is_kernel_mode)
568                 goto no_context;
569
570         force_sig_info_fault("bus error", SIGBUS, BUS_ADRERR, address,
571                              fault_num, tsk, regs);
572         return 0;
573 }
574
575 #ifndef __tilegx__
576
577 /* We must release ICS before panicking or we won't get anywhere. */
578 #define ics_panic(fmt, ...) do { \
579         __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); \
580         panic(fmt, __VA_ARGS__); \
581 } while (0)
582
583 /*
584  * When we take an ITLB or DTLB fault or access violation in the
585  * supervisor while the critical section bit is set, the hypervisor is
586  * reluctant to write new values into the EX_CONTEXT_K_x registers,
587  * since that might indicate we have not yet squirreled the SPR
588  * contents away and can thus safely take a recursive interrupt.
589  * Accordingly, the hypervisor passes us the PC via SYSTEM_SAVE_K_2.
590  *
591  * Note that this routine is called before homecache_tlb_defer_enter(),
592  * which means that we can properly unlock any atomics that might
593  * be used there (good), but also means we must be very sensitive
594  * to not touch any data structures that might be located in memory
595  * that could migrate, as we could be entering the kernel on a dataplane
596  * cpu that has been deferring kernel TLB updates.  This means, for
597  * example, that we can't migrate init_mm or its pgd.
598  */
599 struct intvec_state do_page_fault_ics(struct pt_regs *regs, int fault_num,
600                                       unsigned long address,
601                                       unsigned long info)
602 {
603         unsigned long pc = info & ~1;
604         int write = info & 1;
605         pgd_t *pgd = get_current_pgd();
606
607         /* Retval is 1 at first since we will handle the fault fully. */
608         struct intvec_state state = {
609                 do_page_fault, fault_num, address, write, 1
610         };
611
612         /* Validate that we are plausibly in the right routine. */
613         if ((pc & 0x7) != 0 || pc < PAGE_OFFSET ||
614             (fault_num != INT_DTLB_MISS &&
615              fault_num != INT_DTLB_ACCESS)) {
616                 unsigned long old_pc = regs->pc;
617                 regs->pc = pc;
618                 ics_panic("Bad ICS page fault args:"
619                           " old PC %#lx, fault %d/%d at %#lx\n",
620                           old_pc, fault_num, write, address);
621         }
622
623         /* We might be faulting on a vmalloc page, so check that first. */
624         if (fault_num != INT_DTLB_ACCESS && vmalloc_fault(pgd, address) >= 0)
625                 return state;
626
627         /*
628          * If we faulted with ICS set in sys_cmpxchg, we are providing
629          * a user syscall service that should generate a signal on
630          * fault.  We didn't set up a kernel stack on initial entry to
631          * sys_cmpxchg, but instead had one set up by the fault, which
632          * (because sys_cmpxchg never releases ICS) came to us via the
633          * SYSTEM_SAVE_K_2 mechanism, and thus EX_CONTEXT_K_[01] are
634          * still referencing the original user code.  We release the
635          * atomic lock and rewrite pt_regs so that it appears that we
636          * came from user-space directly, and after we finish the
637          * fault we'll go back to user space and re-issue the swint.
638          * This way the backtrace information is correct if we need to
639          * emit a stack dump at any point while handling this.
640          *
641          * Must match register use in sys_cmpxchg().
642          */
643         if (pc >= (unsigned long) sys_cmpxchg &&
644             pc < (unsigned long) __sys_cmpxchg_end) {
645 #ifdef CONFIG_SMP
646                 /* Don't unlock before we could have locked. */
647                 if (pc >= (unsigned long)__sys_cmpxchg_grab_lock) {
648                         int *lock_ptr = (int *)(regs->regs[ATOMIC_LOCK_REG]);
649                         __atomic_fault_unlock(lock_ptr);
650                 }
651 #endif
652                 regs->sp = regs->regs[27];
653         }
654
655         /*
656          * We can also fault in the atomic assembly, in which
657          * case we use the exception table to do the first-level fixup.
658          * We may re-fixup again in the real fault handler if it
659          * turns out the faulting address is just bad, and not,
660          * for example, migrating.
661          */
662         else if (pc >= (unsigned long) __start_atomic_asm_code &&
663                    pc < (unsigned long) __end_atomic_asm_code) {
664                 const struct exception_table_entry *fixup;
665 #ifdef CONFIG_SMP
666                 /* Unlock the atomic lock. */
667                 int *lock_ptr = (int *)(regs->regs[ATOMIC_LOCK_REG]);
668                 __atomic_fault_unlock(lock_ptr);
669 #endif
670                 fixup = search_exception_tables(pc);
671                 if (!fixup)
672                         ics_panic("ICS atomic fault not in table:"
673                                   " PC %#lx, fault %d", pc, fault_num);
674                 regs->pc = fixup->fixup;
675                 regs->ex1 = PL_ICS_EX1(KERNEL_PL, 0);
676         }
677
678         /*
679          * Now that we have released the atomic lock (if necessary),
680          * it's safe to spin if the PTE that caused the fault was migrating.
681          */
682         if (fault_num == INT_DTLB_ACCESS)
683                 write = 1;
684         if (handle_migrating_pte(pgd, fault_num, address, pc, 1, write))
685                 return state;
686
687         /* Return zero so that we continue on with normal fault handling. */
688         state.retval = 0;
689         return state;
690 }
691
692 #endif /* !__tilegx__ */
693
694 /*
695  * This routine handles page faults.  It determines the address, and the
696  * problem, and then passes it handle_page_fault() for normal DTLB and
697  * ITLB issues, and for DMA or SN processor faults when we are in user
698  * space.  For the latter, if we're in kernel mode, we just save the
699  * interrupt away appropriately and return immediately.  We can't do
700  * page faults for user code while in kernel mode.
701  */
702 void do_page_fault(struct pt_regs *regs, int fault_num,
703                    unsigned long address, unsigned long write)
704 {
705         int is_page_fault;
706
707 #ifdef CONFIG_KPROBES
708         /*
709          * This is to notify the fault handler of the kprobes.  The
710          * exception code is redundant as it is also carried in REGS,
711          * but we pass it anyhow.
712          */
713         if (notify_die(DIE_PAGE_FAULT, "page fault", regs, -1,
714                        regs->faultnum, SIGSEGV) == NOTIFY_STOP)
715                 return;
716 #endif
717
718 #ifdef __tilegx__
719         /*
720          * We don't need early do_page_fault_ics() support, since unlike
721          * Pro we don't need to worry about unlocking the atomic locks.
722          * There is only one current case in GX where we touch any memory
723          * under ICS other than our own kernel stack, and we handle that
724          * here.  (If we crash due to trying to touch our own stack,
725          * we're in too much trouble for C code to help out anyway.)
726          */
727         if (write & ~1) {
728                 unsigned long pc = write & ~1;
729                 if (pc >= (unsigned long) __start_unalign_asm_code &&
730                     pc < (unsigned long) __end_unalign_asm_code) {
731                         struct thread_info *ti = current_thread_info();
732                         /*
733                          * Our EX_CONTEXT is still what it was from the
734                          * initial unalign exception, but now we've faulted
735                          * on the JIT page.  We would like to complete the
736                          * page fault however is appropriate, and then retry
737                          * the instruction that caused the unalign exception.
738                          * Our state has been "corrupted" by setting the low
739                          * bit in "sp", and stashing r0..r3 in the
740                          * thread_info area, so we revert all of that, then
741                          * continue as if this were a normal page fault.
742                          */
743                         regs->sp &= ~1UL;
744                         regs->regs[0] = ti->unalign_jit_tmp[0];
745                         regs->regs[1] = ti->unalign_jit_tmp[1];
746                         regs->regs[2] = ti->unalign_jit_tmp[2];
747                         regs->regs[3] = ti->unalign_jit_tmp[3];
748                         write &= 1;
749                 } else {
750                         pr_alert("%s/%d: ICS set at page fault at %#lx: %#lx\n",
751                                  current->comm, current->pid, pc, address);
752                         show_regs(regs);
753                         do_group_exit(SIGKILL);
754                         return;
755                 }
756         }
757 #else
758         /* This case should have been handled by do_page_fault_ics(). */
759         BUG_ON(write & ~1);
760 #endif
761
762 #if CHIP_HAS_TILE_DMA()
763         /*
764          * If it's a DMA fault, suspend the transfer while we're
765          * handling the miss; we'll restart after it's handled.  If we
766          * don't suspend, it's possible that this process could swap
767          * out and back in, and restart the engine since the DMA is
768          * still 'running'.
769          */
770         if (fault_num == INT_DMATLB_MISS ||
771             fault_num == INT_DMATLB_ACCESS ||
772             fault_num == INT_DMATLB_MISS_DWNCL ||
773             fault_num == INT_DMATLB_ACCESS_DWNCL) {
774                 __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__SUSPEND_MASK);
775                 while (__insn_mfspr(SPR_DMA_USER_STATUS) &
776                        SPR_DMA_STATUS__BUSY_MASK)
777                         ;
778         }
779 #endif
780
781         /* Validate fault num and decide if this is a first-time page fault. */
782         switch (fault_num) {
783         case INT_ITLB_MISS:
784         case INT_DTLB_MISS:
785 #if CHIP_HAS_TILE_DMA()
786         case INT_DMATLB_MISS:
787         case INT_DMATLB_MISS_DWNCL:
788 #endif
789                 is_page_fault = 1;
790                 break;
791
792         case INT_DTLB_ACCESS:
793 #if CHIP_HAS_TILE_DMA()
794         case INT_DMATLB_ACCESS:
795         case INT_DMATLB_ACCESS_DWNCL:
796 #endif
797                 is_page_fault = 0;
798                 break;
799
800         default:
801                 panic("Bad fault number %d in do_page_fault", fault_num);
802         }
803
804 #if CHIP_HAS_TILE_DMA()
805         if (!user_mode(regs)) {
806                 struct async_tlb *async;
807                 switch (fault_num) {
808 #if CHIP_HAS_TILE_DMA()
809                 case INT_DMATLB_MISS:
810                 case INT_DMATLB_ACCESS:
811                 case INT_DMATLB_MISS_DWNCL:
812                 case INT_DMATLB_ACCESS_DWNCL:
813                         async = &current->thread.dma_async_tlb;
814                         break;
815 #endif
816                 default:
817                         async = NULL;
818                 }
819                 if (async) {
820
821                         /*
822                          * No vmalloc check required, so we can allow
823                          * interrupts immediately at this point.
824                          */
825                         local_irq_enable();
826
827                         set_thread_flag(TIF_ASYNC_TLB);
828                         if (async->fault_num != 0) {
829                                 panic("Second async fault %d;"
830                                       " old fault was %d (%#lx/%ld)",
831                                       fault_num, async->fault_num,
832                                       address, write);
833                         }
834                         BUG_ON(fault_num == 0);
835                         async->fault_num = fault_num;
836                         async->is_fault = is_page_fault;
837                         async->is_write = write;
838                         async->address = address;
839                         return;
840                 }
841         }
842 #endif
843
844         handle_page_fault(regs, fault_num, is_page_fault, address, write);
845 }
846
847
848 #if CHIP_HAS_TILE_DMA()
849 /*
850  * This routine effectively re-issues asynchronous page faults
851  * when we are returning to user space.
852  */
853 void do_async_page_fault(struct pt_regs *regs)
854 {
855         struct async_tlb *async = &current->thread.dma_async_tlb;
856
857         /*
858          * Clear thread flag early.  If we re-interrupt while processing
859          * code here, we will reset it and recall this routine before
860          * returning to user space.
861          */
862         clear_thread_flag(TIF_ASYNC_TLB);
863
864         if (async->fault_num) {
865                 /*
866                  * Clear async->fault_num before calling the page-fault
867                  * handler so that if we re-interrupt before returning
868                  * from the function we have somewhere to put the
869                  * information from the new interrupt.
870                  */
871                 int fault_num = async->fault_num;
872                 async->fault_num = 0;
873                 handle_page_fault(regs, fault_num, async->is_fault,
874                                   async->address, async->is_write);
875         }
876 }
877 #endif /* CHIP_HAS_TILE_DMA() */
878
879
880 void vmalloc_sync_all(void)
881 {
882 #ifdef __tilegx__
883         /* Currently all L1 kernel pmd's are static and shared. */
884         BUILD_BUG_ON(pgd_index(VMALLOC_END - PAGE_SIZE) !=
885                      pgd_index(VMALLOC_START));
886 #else
887         /*
888          * Note that races in the updates of insync and start aren't
889          * problematic: insync can only get set bits added, and updates to
890          * start are only improving performance (without affecting correctness
891          * if undone).
892          */
893         static DECLARE_BITMAP(insync, PTRS_PER_PGD);
894         static unsigned long start = PAGE_OFFSET;
895         unsigned long address;
896
897         BUILD_BUG_ON(PAGE_OFFSET & ~PGDIR_MASK);
898         for (address = start; address >= PAGE_OFFSET; address += PGDIR_SIZE) {
899                 if (!test_bit(pgd_index(address), insync)) {
900                         unsigned long flags;
901                         struct list_head *pos;
902
903                         spin_lock_irqsave(&pgd_lock, flags);
904                         list_for_each(pos, &pgd_list)
905                                 if (!vmalloc_sync_one(list_to_pgd(pos),
906                                                                 address)) {
907                                         /* Must be at first entry in list. */
908                                         BUG_ON(pos != pgd_list.next);
909                                         break;
910                                 }
911                         spin_unlock_irqrestore(&pgd_lock, flags);
912                         if (pos != pgd_list.next)
913                                 set_bit(pgd_index(address), insync);
914                 }
915                 if (address == start && test_bit(pgd_index(address), insync))
916                         start = address + PGDIR_SIZE;
917         }
918 #endif
919 }