arch/x86/include/asm/fpu-internal.h

   1 /*
   2  * Copyright (C) 1994 Linus Torvalds
   3  *
   4  * Pentium III FXSR, SSE support
   5  * General FPU state handling cleanups
   6  *      Gareth Hughes <gareth@valinux.com>, May 2000
   7  * x86-64 work by Andi Kleen 2002
   8  */
   9
  10 #ifndef _FPU_INTERNAL_H
  11 #define _FPU_INTERNAL_H
  12
  13 #include <linux/kernel_stat.h>
  14 #include <linux/regset.h>
  15 #include <linux/compat.h>
  16 #include <linux/slab.h>
  17 #include <asm/asm.h>
  18 #include <asm/cpufeature.h>
  19 #include <asm/processor.h>
  20 #include <asm/sigcontext.h>
  21 #include <asm/user.h>
  22 #include <asm/uaccess.h>
  23 #include <asm/xsave.h>
  24 #include <asm/smap.h>
  25
  26 #ifdef CONFIG_X86_64
  27 # include <asm/sigcontext32.h>
  28 # include <asm/user32.h>
  29 struct ksignal;
  30 int ia32_setup_rt_frame(int sig, struct ksignal *ksig,
  31                         compat_sigset_t *set, struct pt_regs *regs);
  32 int ia32_setup_frame(int sig, struct ksignal *ksig,
  33                      compat_sigset_t *set, struct pt_regs *regs);
  34 #else
  35 # define user_i387_ia32_struct  user_i387_struct
  36 # define user32_fxsr_struct     user_fxsr_struct
  37 # define ia32_setup_frame       __setup_frame
  38 # define ia32_setup_rt_frame    __setup_rt_frame
  39 #endif
  40
  41 extern unsigned int mxcsr_feature_mask;
  42 extern void fpu_init(void);
  43 extern void eager_fpu_init(void);
  44
  45 DECLARE_PER_CPU(struct task_struct *, fpu_owner_task);
  46
  47 extern void convert_from_fxsr(struct user_i387_ia32_struct *env,
  48                               struct task_struct *tsk);
  49 extern void convert_to_fxsr(struct task_struct *tsk,
  50                             const struct user_i387_ia32_struct *env);
  51
  52 extern user_regset_active_fn fpregs_active, xfpregs_active;
  53 extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
  54                                 xstateregs_get;
  55 extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set,
  56                                  xstateregs_set;
  57
  58 /*
  59  * xstateregs_active == fpregs_active. Please refer to the comment
  60  * at the definition of fpregs_active.
  61  */
  62 #define xstateregs_active       fpregs_active
  63
  64 #ifdef CONFIG_MATH_EMULATION
  65 extern void finit_soft_fpu(struct i387_soft_struct *soft);
  66 #else
  67 static inline void finit_soft_fpu(struct i387_soft_struct *soft) {}
  68 #endif
  69
  70 /*
  71  * Must be run with preemption disabled: this clears the fpu_owner_task,
  72  * on this CPU.
  73  *
  74  * This will disable any lazy FPU state restore of the current FPU state,
  75  * but if the current thread owns the FPU, it will still be saved by.
  76  */
  77 static inline void __cpu_disable_lazy_restore(unsigned int cpu)
  78 {
  79         per_cpu(fpu_owner_task, cpu) = NULL;
  80 }
  81
  82 /*
  83  * Used to indicate that the FPU state in memory is newer than the FPU
  84  * state in registers, and the FPU state should be reloaded next time the
  85  * task is run. Only safe on the current task, or non-running tasks.
  86  */
  87 static inline void task_disable_lazy_fpu_restore(struct task_struct *tsk)
  88 {
  89         tsk->thread.fpu.last_cpu = ~0;
  90 }
  91
  92 static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
  93 {
  94         return new == this_cpu_read_stable(fpu_owner_task) &&
  95                 cpu == new->thread.fpu.last_cpu;
  96 }
  97
  98 static inline int is_ia32_compat_frame(void)
  99 {
 100         return config_enabled(CONFIG_IA32_EMULATION) &&
 101                test_thread_flag(TIF_IA32);
 102 }
 103
 104 static inline int is_ia32_frame(void)
 105 {
 106         return config_enabled(CONFIG_X86_32) || is_ia32_compat_frame();
 107 }
 108
 109 static inline int is_x32_frame(void)
 110 {
 111         return config_enabled(CONFIG_X86_X32_ABI) && test_thread_flag(TIF_X32);
 112 }
 113
 114 #define X87_FSW_ES (1 << 7)     /* Exception Summary */
 115
 116 static __always_inline __pure bool use_eager_fpu(void)
 117 {
 118         return static_cpu_has_safe(X86_FEATURE_EAGER_FPU);
 119 }
 120
 121 static __always_inline __pure bool use_xsaveopt(void)
 122 {
 123         return static_cpu_has_safe(X86_FEATURE_XSAVEOPT);
 124 }
 125
 126 static __always_inline __pure bool use_xsave(void)
 127 {
 128         return static_cpu_has_safe(X86_FEATURE_XSAVE);
 129 }
 130
 131 static __always_inline __pure bool use_fxsr(void)
 132 {
 133         return static_cpu_has_safe(X86_FEATURE_FXSR);
 134 }
 135
 136 static inline void fx_finit(struct i387_fxsave_struct *fx)
 137 {
 138         fx->cwd = 0x37f;
 139         fx->mxcsr = MXCSR_DEFAULT;
 140 }
 141
 142 extern void __sanitize_i387_state(struct task_struct *);
 143
 144 static inline void sanitize_i387_state(struct task_struct *tsk)
 145 {
 146         if (!use_xsaveopt())
 147                 return;
 148         __sanitize_i387_state(tsk);
 149 }
 150
 151 #define user_insn(insn, output, input...)                               \
 152 ({                                                                      \
 153         int err;                                                        \
 154         asm volatile(ASM_STAC "\n"                                      \
 155                      "1:" #insn "\n\t"                                  \
 156                      "2: " ASM_CLAC "\n"                                \
 157                      ".section .fixup,\"ax\"\n"                         \
 158                      "3:  movl $-1,%[err]\n"                            \
 159                      "    jmp  2b\n"                                    \
 160                      ".previous\n"                                      \
 161                      _ASM_EXTABLE(1b, 3b)                               \
 162                      : [err] "=r" (err), output                         \
 163                      : "0"(0), input);                                  \
 164         err;                                                            \
 165 })
 166
 167 #define check_insn(insn, output, input...)                              \
 168 ({                                                                      \
 169         int err;                                                        \
 170         asm volatile("1:" #insn "\n\t"                                  \
 171                      "2:\n"                                             \
 172                      ".section .fixup,\"ax\"\n"                         \
 173                      "3:  movl $-1,%[err]\n"                            \
 174                      "    jmp  2b\n"                                    \
 175                      ".previous\n"                                      \
 176                      _ASM_EXTABLE(1b, 3b)                               \
 177                      : [err] "=r" (err), output                         \
 178                      : "0"(0), input);                                  \
 179         err;                                                            \
 180 })
 181
 182 static inline int fsave_user(struct i387_fsave_struct __user *fx)
 183 {
 184         return user_insn(fnsave %[fx]; fwait,  [fx] "=m" (*fx), "m" (*fx));
 185 }
 186
 187 static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
 188 {
 189         if (config_enabled(CONFIG_X86_32))
 190                 return user_insn(fxsave %[fx], [fx] "=m" (*fx), "m" (*fx));
 191         else if (config_enabled(CONFIG_AS_FXSAVEQ))
 192                 return user_insn(fxsaveq %[fx], [fx] "=m" (*fx), "m" (*fx));
 193
 194         /* See comment in fpu_fxsave() below. */
 195         return user_insn(rex64/fxsave (%[fx]), "=m" (*fx), [fx] "R" (fx));
 196 }
 197
 198 static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
 199 {
 200         if (config_enabled(CONFIG_X86_32))
 201                 return check_insn(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx));
 202         else if (config_enabled(CONFIG_AS_FXSAVEQ))
 203                 return check_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
 204
 205         /* See comment in fpu_fxsave() below. */
 206         return check_insn(rex64/fxrstor (%[fx]), "=m" (*fx), [fx] "R" (fx),
 207                           "m" (*fx));
 208 }
 209
 210 static inline int fxrstor_user(struct i387_fxsave_struct __user *fx)
 211 {
 212         if (config_enabled(CONFIG_X86_32))
 213                 return user_insn(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx));
 214         else if (config_enabled(CONFIG_AS_FXSAVEQ))
 215                 return user_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
 216
 217         /* See comment in fpu_fxsave() below. */
 218         return user_insn(rex64/fxrstor (%[fx]), "=m" (*fx), [fx] "R" (fx),
 219                           "m" (*fx));
 220 }
 221
 222 static inline int frstor_checking(struct i387_fsave_struct *fx)
 223 {
 224         return check_insn(frstor %[fx], "=m" (*fx), [fx] "m" (*fx));
 225 }
 226
 227 static inline int frstor_user(struct i387_fsave_struct __user *fx)
 228 {
 229         return user_insn(frstor %[fx], "=m" (*fx), [fx] "m" (*fx));
 230 }
 231
 232 static inline void fpu_fxsave(struct fpu *fpu)
 233 {
 234         if (config_enabled(CONFIG_X86_32))
 235                 asm volatile( "fxsave %[fx]" : [fx] "=m" (fpu->state->fxsave));
 236         else if (config_enabled(CONFIG_AS_FXSAVEQ))
 237                 asm volatile("fxsaveq %[fx]" : [fx] "=m" (fpu->state->fxsave));
 238         else {
 239                 /* Using "rex64; fxsave %0" is broken because, if the memory
 240                  * operand uses any extended registers for addressing, a second
 241                  * REX prefix will be generated (to the assembler, rex64
 242                  * followed by semicolon is a separate instruction), and hence
 243                  * the 64-bitness is lost.
 244                  *
 245                  * Using "fxsaveq %0" would be the ideal choice, but is only
 246                  * supported starting with gas 2.16.
 247                  *
 248                  * Using, as a workaround, the properly prefixed form below
 249                  * isn't accepted by any binutils version so far released,
 250                  * complaining that the same type of prefix is used twice if
 251                  * an extended register is needed for addressing (fix submitted
 252                  * to mainline 2005-11-21).
 253                  *
 254                  *  asm volatile("rex64/fxsave %0" : "=m" (fpu->state->fxsave));
 255                  *
 256                  * This, however, we can work around by forcing the compiler to
 257                  * select an addressing mode that doesn't require extended
 258                  * registers.
 259                  */
 260                 asm volatile( "rex64/fxsave (%[fx])"
 261                              : "=m" (fpu->state->fxsave)
 262                              : [fx] "R" (&fpu->state->fxsave));
 263         }
 264 }
 265
 266 /*
 267  * These must be called with preempt disabled. Returns
 268  * 'true' if the FPU state is still intact.
 269  */
 270 static inline int fpu_save_init(struct fpu *fpu)
 271 {
 272         if (use_xsave()) {
 273                 fpu_xsave(fpu);
 274
 275                 /*
 276                  * xsave header may indicate the init state of the FP.
 277                  */
 278                 if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP))
 279                         return 1;
 280         } else if (use_fxsr()) {
 281                 fpu_fxsave(fpu);
 282         } else {
 283                 asm volatile("fnsave %[fx]; fwait"
 284                              : [fx] "=m" (fpu->state->fsave));
 285                 return 0;
 286         }
 287
 288         /*
 289          * If exceptions are pending, we need to clear them so
 290          * that we don't randomly get exceptions later.
 291          *
 292          * FIXME! Is this perhaps only true for the old-style
 293          * irq13 case? Maybe we could leave the x87 state
 294          * intact otherwise?
 295          */
 296         if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) {
 297                 asm volatile("fnclex");
 298                 return 0;
 299         }
 300         return 1;
 301 }
 302
 303 static inline int __save_init_fpu(struct task_struct *tsk)
 304 {
 305         return fpu_save_init(&tsk->thread.fpu);
 306 }
 307
 308 static inline int fpu_restore_checking(struct fpu *fpu)
 309 {
 310         if (use_xsave())
 311                 return fpu_xrstor_checking(&fpu->state->xsave);
 312         else if (use_fxsr())
 313                 return fxrstor_checking(&fpu->state->fxsave);
 314         else
 315                 return frstor_checking(&fpu->state->fsave);
 316 }
 317
 318 static inline int restore_fpu_checking(struct task_struct *tsk)
 319 {
 320         /*
 321          * AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception is
 322          * pending. Clear the x87 state here by setting it to fixed values.
 323          * "m" is a random variable that should be in L1.
 324          */
 325         if (unlikely(static_cpu_has_bug_safe(X86_BUG_FXSAVE_LEAK))) {
 326                 asm volatile(
 327                         "fnclex\n\t"
 328                         "emms\n\t"
 329                         "fildl %P[addr]"        /* set F?P to defined value */
 330                         : : [addr] "m" (tsk->thread.fpu.has_fpu));
 331         }
 332
 333         return fpu_restore_checking(&tsk->thread.fpu);
 334 }
 335
 336 /*
 337  * Software FPU state helpers. Careful: these need to
 338  * be preemption protection *and* they need to be
 339  * properly paired with the CR0.TS changes!
 340  */
 341 static inline int __thread_has_fpu(struct task_struct *tsk)
 342 {
 343         return tsk->thread.fpu.has_fpu;
 344 }
 345
 346 /* Must be paired with an 'stts' after! */
 347 static inline void __thread_clear_has_fpu(struct task_struct *tsk)
 348 {
 349         tsk->thread.fpu.has_fpu = 0;
 350         this_cpu_write(fpu_owner_task, NULL);
 351 }
 352
 353 /* Must be paired with a 'clts' before! */
 354 static inline void __thread_set_has_fpu(struct task_struct *tsk)
 355 {
 356         tsk->thread.fpu.has_fpu = 1;
 357         this_cpu_write(fpu_owner_task, tsk);
 358 }
 359
 360 /*
 361  * Encapsulate the CR0.TS handling together with the
 362  * software flag.
 363  *
 364  * These generally need preemption protection to work,
 365  * do try to avoid using these on their own.
 366  */
 367 static inline void __thread_fpu_end(struct task_struct *tsk)
 368 {
 369         __thread_clear_has_fpu(tsk);
 370         if (!use_eager_fpu())
 371                 stts();
 372 }
 373
 374 static inline void __thread_fpu_begin(struct task_struct *tsk)
 375 {
 376         if (!use_eager_fpu())
 377                 clts();
 378         __thread_set_has_fpu(tsk);
 379 }
 380
 381 static inline void __drop_fpu(struct task_struct *tsk)
 382 {
 383         if (__thread_has_fpu(tsk)) {
 384                 /* Ignore delayed exceptions from user space */
 385                 asm volatile("1: fwait\n"
 386                              "2:\n"
 387                              _ASM_EXTABLE(1b, 2b));
 388                 __thread_fpu_end(tsk);
 389         }
 390 }
 391
 392 static inline void drop_fpu(struct task_struct *tsk)
 393 {
 394         /*
 395          * Forget coprocessor state..
 396          */
 397         preempt_disable();
 398         tsk->thread.fpu_counter = 0;
 399         __drop_fpu(tsk);
 400         clear_stopped_child_used_math(tsk);
 401         preempt_enable();
 402 }
 403
 404 static inline void drop_init_fpu(struct task_struct *tsk)
 405 {
 406         if (!use_eager_fpu())
 407                 drop_fpu(tsk);
 408         else {
 409                 if (use_xsave())
 410                         xrstor_state(init_xstate_buf, -1);
 411                 else
 412                         fxrstor_checking(&init_xstate_buf->i387);
 413         }
 414 }
 415
 416 /*
 417  * FPU state switching for scheduling.
 418  *
 419  * This is a two-stage process:
 420  *
 421  *  - switch_fpu_prepare() saves the old state and
 422  *    sets the new state of the CR0.TS bit. This is
 423  *    done within the context of the old process.
 424  *
 425  *  - switch_fpu_finish() restores the new state as
 426  *    necessary.
 427  */
 428 typedef struct { int preload; } fpu_switch_t;
 429
 430 static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu)
 431 {
 432         fpu_switch_t fpu;
 433
 434         /*
 435          * If the task has used the math, pre-load the FPU on xsave processors
 436          * or if the past 5 consecutive context-switches used math.
 437          */
 438         fpu.preload = tsk_used_math(new) &&
 439                       (use_eager_fpu() || new->thread.fpu_counter > 5);
 440
 441         if (__thread_has_fpu(old)) {
 442                 if (!__save_init_fpu(old))
 443                         task_disable_lazy_fpu_restore(old);
 444                 else
 445                         old->thread.fpu.last_cpu = cpu;
 446
 447                 /* But leave fpu_owner_task! */
 448                 old->thread.fpu.has_fpu = 0;
 449
 450                 /* Don't change CR0.TS if we just switch! */
 451                 if (fpu.preload) {
 452                         new->thread.fpu_counter++;
 453                         __thread_set_has_fpu(new);
 454                         prefetch(new->thread.fpu.state);
 455                 } else if (!use_eager_fpu())
 456                         stts();
 457         } else {
 458                 old->thread.fpu_counter = 0;
 459                 task_disable_lazy_fpu_restore(old);
 460                 if (fpu.preload) {
 461                         new->thread.fpu_counter++;
 462                         if (fpu_lazy_restore(new, cpu))
 463                                 fpu.preload = 0;
 464                         else
 465                                 prefetch(new->thread.fpu.state);
 466                         __thread_fpu_begin(new);
 467                 }
 468         }
 469         return fpu;
 470 }
 471
 472 /*
 473  * By the time this gets called, we've already cleared CR0.TS and
 474  * given the process the FPU if we are going to preload the FPU
 475  * state - all we need to do is to conditionally restore the register
 476  * state itself.
 477  */
 478 static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu)
 479 {
 480         if (fpu.preload) {
 481                 if (unlikely(restore_fpu_checking(new)))
 482                         drop_init_fpu(new);
 483         }
 484 }
 485
 486 /*
 487  * Signal frame handlers...
 488  */
 489 extern int save_xstate_sig(void __user *buf, void __user *fx, int size);
 490 extern int __restore_xstate_sig(void __user *buf, void __user *fx, int size);
 491
 492 static inline int xstate_sigframe_size(void)
 493 {
 494         return use_xsave() ? xstate_size + FP_XSTATE_MAGIC2_SIZE : xstate_size;
 495 }
 496
 497 static inline int restore_xstate_sig(void __user *buf, int ia32_frame)
 498 {
 499         void __user *buf_fx = buf;
 500         int size = xstate_sigframe_size();
 501
 502         if (ia32_frame && use_fxsr()) {
 503                 buf_fx = buf + sizeof(struct i387_fsave_struct);
 504                 size += sizeof(struct i387_fsave_struct);
 505         }
 506
 507         return __restore_xstate_sig(buf, buf_fx, size);
 508 }
 509
 510 /*
 511  * Need to be preemption-safe.
 512  *
 513  * NOTE! user_fpu_begin() must be used only immediately before restoring
 514  * it. This function does not do any save/restore on their own.
 515  */
 516 static inline void user_fpu_begin(void)
 517 {
 518         preempt_disable();
 519         if (!user_has_fpu())
 520                 __thread_fpu_begin(current);
 521         preempt_enable();
 522 }
 523
 524 static inline void __save_fpu(struct task_struct *tsk)
 525 {
 526         if (use_xsave()) {
 527                 if (unlikely(system_state == SYSTEM_BOOTING))
 528                         xsave_state_booting(&tsk->thread.fpu.state->xsave, -1);
 529                 else
 530                         xsave_state(&tsk->thread.fpu.state->xsave, -1);
 531         } else
 532                 fpu_fxsave(&tsk->thread.fpu);
 533 }
 534
 535 /*
 536  * i387 state interaction
 537  */
 538 static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
 539 {
 540         if (cpu_has_fxsr) {
 541                 return tsk->thread.fpu.state->fxsave.cwd;
 542         } else {
 543                 return (unsigned short)tsk->thread.fpu.state->fsave.cwd;
 544         }
 545 }
 546
 547 static inline unsigned short get_fpu_swd(struct task_struct *tsk)
 548 {
 549         if (cpu_has_fxsr) {
 550                 return tsk->thread.fpu.state->fxsave.swd;
 551         } else {
 552                 return (unsigned short)tsk->thread.fpu.state->fsave.swd;
 553         }
 554 }
 555
 556 static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
 557 {
 558         if (cpu_has_xmm) {
 559                 return tsk->thread.fpu.state->fxsave.mxcsr;
 560         } else {
 561                 return MXCSR_DEFAULT;
 562         }
 563 }
 564
 565 static bool fpu_allocated(struct fpu *fpu)
 566 {
 567         return fpu->state != NULL;
 568 }
 569
 570 static inline int fpu_alloc(struct fpu *fpu)
 571 {
 572         if (fpu_allocated(fpu))
 573                 return 0;
 574         fpu->state = kmem_cache_alloc(task_xstate_cachep, GFP_KERNEL);
 575         if (!fpu->state)
 576                 return -ENOMEM;
 577         WARN_ON((unsigned long)fpu->state & 15);
 578         return 0;
 579 }
 580
 581 static inline void fpu_free(struct fpu *fpu)
 582 {
 583         if (fpu->state) {
 584                 kmem_cache_free(task_xstate_cachep, fpu->state);
 585                 fpu->state = NULL;
 586         }
 587 }
 588
 589 static inline void fpu_copy(struct task_struct *dst, struct task_struct *src)
 590 {
 591         if (use_eager_fpu()) {
 592                 memset(&dst->thread.fpu.state->xsave, 0, xstate_size);
 593                 __save_fpu(dst);
 594         } else {
 595                 struct fpu *dfpu = &dst->thread.fpu;
 596                 struct fpu *sfpu = &src->thread.fpu;
 597
 598                 unlazy_fpu(src);
 599                 memcpy(dfpu->state, sfpu->state, xstate_size);
 600         }
 601 }
 602
 603 static inline unsigned long
 604 alloc_mathframe(unsigned long sp, int ia32_frame, unsigned long *buf_fx,
 605                 unsigned long *size)
 606 {
 607         unsigned long frame_size = xstate_sigframe_size();
 608
 609         *buf_fx = sp = round_down(sp - frame_size, 64);
 610         if (ia32_frame && use_fxsr()) {
 611                 frame_size += sizeof(struct i387_fsave_struct);
 612                 sp -= sizeof(struct i387_fsave_struct);
 613         }
 614
 615         *size = frame_size;
 616         return sp;
 617 }
 618
 619 #endif