drivers/acpi/acpica/dbmethod.c

   1 /*******************************************************************************
   2  *
   3  * Module Name: dbmethod - Debug commands for control methods
   4  *
   5  ******************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2016, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acdispat.h"
  47 #include "acnamesp.h"
  48 #include "acdebug.h"
  49 #include "acparser.h"
  50 #include "acpredef.h"
  51
  52 #define _COMPONENT          ACPI_CA_DEBUGGER
  53 ACPI_MODULE_NAME("dbmethod")
  54
  55 /* Local prototypes */
  56 static acpi_status
  57 acpi_db_walk_for_execute(acpi_handle obj_handle,
  58                          u32 nesting_level, void *context, void **return_value);
  59
  60 /*******************************************************************************
  61  *
  62  * FUNCTION:    acpi_db_set_method_breakpoint
  63  *
  64  * PARAMETERS:  location            - AML offset of breakpoint
  65  *              walk_state          - Current walk info
  66  *              op                  - Current Op (from parse walk)
  67  *
  68  * RETURN:      None
  69  *
  70  * DESCRIPTION: Set a breakpoint in a control method at the specified
  71  *              AML offset
  72  *
  73  ******************************************************************************/
  74
  75 void
  76 acpi_db_set_method_breakpoint(char *location,
  77                               struct acpi_walk_state *walk_state,
  78                               union acpi_parse_object *op)
  79 {
  80         u32 address;
  81         u32 aml_offset;
  82
  83         if (!op) {
  84                 acpi_os_printf("There is no method currently executing\n");
  85                 return;
  86         }
  87
  88         /* Get and verify the breakpoint address */
  89
  90         address = strtoul(location, NULL, 16);
  91         aml_offset = (u32)ACPI_PTR_DIFF(op->common.aml,
  92                                         walk_state->parser_state.aml_start);
  93         if (address <= aml_offset) {
  94                 acpi_os_printf("Breakpoint %X is beyond current address %X\n",
  95                                address, aml_offset);
  96         }
  97
  98         /* Save breakpoint in current walk */
  99
 100         walk_state->user_breakpoint = address;
 101         acpi_os_printf("Breakpoint set at AML offset %X\n", address);
 102 }
 103
 104 /*******************************************************************************
 105  *
 106  * FUNCTION:    acpi_db_set_method_call_breakpoint
 107  *
 108  * PARAMETERS:  op                  - Current Op (from parse walk)
 109  *
 110  * RETURN:      None
 111  *
 112  * DESCRIPTION: Set a breakpoint in a control method at the specified
 113  *              AML offset
 114  *
 115  ******************************************************************************/
 116
 117 void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op)
 118 {
 119
 120         if (!op) {
 121                 acpi_os_printf("There is no method currently executing\n");
 122                 return;
 123         }
 124
 125         acpi_gbl_step_to_next_call = TRUE;
 126 }
 127
 128 /*******************************************************************************
 129  *
 130  * FUNCTION:    acpi_db_set_method_data
 131  *
 132  * PARAMETERS:  type_arg        - L for local, A for argument
 133  *              index_arg       - which one
 134  *              value_arg       - Value to set.
 135  *
 136  * RETURN:      None
 137  *
 138  * DESCRIPTION: Set a local or argument for the running control method.
 139  *              NOTE: only object supported is Number.
 140  *
 141  ******************************************************************************/
 142
 143 void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg)
 144 {
 145         char type;
 146         u32 index;
 147         u32 value;
 148         struct acpi_walk_state *walk_state;
 149         union acpi_operand_object *obj_desc;
 150         acpi_status status;
 151         struct acpi_namespace_node *node;
 152
 153         /* Validate type_arg */
 154
 155         acpi_ut_strupr(type_arg);
 156         type = type_arg[0];
 157         if ((type != 'L') && (type != 'A') && (type != 'N')) {
 158                 acpi_os_printf("Invalid SET operand: %s\n", type_arg);
 159                 return;
 160         }
 161
 162         value = strtoul(value_arg, NULL, 16);
 163
 164         if (type == 'N') {
 165                 node = acpi_db_convert_to_node(index_arg);
 166                 if (!node) {
 167                         return;
 168                 }
 169
 170                 if (node->type != ACPI_TYPE_INTEGER) {
 171                         acpi_os_printf("Can only set Integer nodes\n");
 172                         return;
 173                 }
 174                 obj_desc = node->object;
 175                 obj_desc->integer.value = value;
 176                 return;
 177         }
 178
 179         /* Get the index and value */
 180
 181         index = strtoul(index_arg, NULL, 16);
 182
 183         walk_state = acpi_ds_get_current_walk_state(acpi_gbl_current_walk_list);
 184         if (!walk_state) {
 185                 acpi_os_printf("There is no method currently executing\n");
 186                 return;
 187         }
 188
 189         /* Create and initialize the new object */
 190
 191         obj_desc = acpi_ut_create_integer_object((u64)value);
 192         if (!obj_desc) {
 193                 acpi_os_printf("Could not create an internal object\n");
 194                 return;
 195         }
 196
 197         /* Store the new object into the target */
 198
 199         switch (type) {
 200         case 'A':
 201
 202                 /* Set a method argument */
 203
 204                 if (index > ACPI_METHOD_MAX_ARG) {
 205                         acpi_os_printf("Arg%u - Invalid argument name\n",
 206                                        index);
 207                         goto cleanup;
 208                 }
 209
 210                 status = acpi_ds_store_object_to_local(ACPI_REFCLASS_ARG,
 211                                                        index, obj_desc,
 212                                                        walk_state);
 213                 if (ACPI_FAILURE(status)) {
 214                         goto cleanup;
 215                 }
 216
 217                 obj_desc = walk_state->arguments[index].object;
 218
 219                 acpi_os_printf("Arg%u: ", index);
 220                 acpi_db_display_internal_object(obj_desc, walk_state);
 221                 break;
 222
 223         case 'L':
 224
 225                 /* Set a method local */
 226
 227                 if (index > ACPI_METHOD_MAX_LOCAL) {
 228                         acpi_os_printf
 229                             ("Local%u - Invalid local variable name\n", index);
 230                         goto cleanup;
 231                 }
 232
 233                 status = acpi_ds_store_object_to_local(ACPI_REFCLASS_LOCAL,
 234                                                        index, obj_desc,
 235                                                        walk_state);
 236                 if (ACPI_FAILURE(status)) {
 237                         goto cleanup;
 238                 }
 239
 240                 obj_desc = walk_state->local_variables[index].object;
 241
 242                 acpi_os_printf("Local%u: ", index);
 243                 acpi_db_display_internal_object(obj_desc, walk_state);
 244                 break;
 245
 246         default:
 247
 248                 break;
 249         }
 250
 251 cleanup:
 252         acpi_ut_remove_reference(obj_desc);
 253 }
 254
 255 /*******************************************************************************
 256  *
 257  * FUNCTION:    acpi_db_disassemble_aml
 258  *
 259  * PARAMETERS:  statements          - Number of statements to disassemble
 260  *              op                  - Current Op (from parse walk)
 261  *
 262  * RETURN:      None
 263  *
 264  * DESCRIPTION: Display disassembled AML (ASL) starting from Op for the number
 265  *              of statements specified.
 266  *
 267  ******************************************************************************/
 268
 269 void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op)
 270 {
 271         u32 num_statements = 8;
 272
 273         if (!op) {
 274                 acpi_os_printf("There is no method currently executing\n");
 275                 return;
 276         }
 277
 278         if (statements) {
 279                 num_statements = strtoul(statements, NULL, 0);
 280         }
 281 #ifdef ACPI_DISASSEMBLER
 282         acpi_dm_disassemble(NULL, op, num_statements);
 283 #endif
 284 }
 285
 286 /*******************************************************************************
 287  *
 288  * FUNCTION:    acpi_db_disassemble_method
 289  *
 290  * PARAMETERS:  name            - Name of control method
 291  *
 292  * RETURN:      None
 293  *
 294  * DESCRIPTION: Display disassembled AML (ASL) starting from Op for the number
 295  *              of statements specified.
 296  *
 297  ******************************************************************************/
 298
 299 acpi_status acpi_db_disassemble_method(char *name)
 300 {
 301         acpi_status status;
 302         union acpi_parse_object *op;
 303         struct acpi_walk_state *walk_state;
 304         union acpi_operand_object *obj_desc;
 305         struct acpi_namespace_node *method;
 306
 307         method = acpi_db_convert_to_node(name);
 308         if (!method) {
 309                 return (AE_BAD_PARAMETER);
 310         }
 311
 312         if (method->type != ACPI_TYPE_METHOD) {
 313                 ACPI_ERROR((AE_INFO, "%s (%s): Object must be a control method",
 314                             name, acpi_ut_get_type_name(method->type)));
 315                 return (AE_BAD_PARAMETER);
 316         }
 317
 318         obj_desc = method->object;
 319
 320         op = acpi_ps_create_scope_op(obj_desc->method.aml_start);
 321         if (!op) {
 322                 return (AE_NO_MEMORY);
 323         }
 324
 325         /* Create and initialize a new walk state */
 326
 327         walk_state = acpi_ds_create_walk_state(0, op, NULL, NULL);
 328         if (!walk_state) {
 329                 return (AE_NO_MEMORY);
 330         }
 331
 332         status = acpi_ds_init_aml_walk(walk_state, op, NULL,
 333                                        obj_desc->method.aml_start,
 334                                        obj_desc->method.aml_length, NULL,
 335                                        ACPI_IMODE_LOAD_PASS1);
 336         if (ACPI_FAILURE(status)) {
 337                 return (status);
 338         }
 339
 340         status = acpi_ut_allocate_owner_id(&obj_desc->method.owner_id);
 341         walk_state->owner_id = obj_desc->method.owner_id;
 342
 343         /* Push start scope on scope stack and make it current */
 344
 345         status = acpi_ds_scope_stack_push(method, method->type, walk_state);
 346         if (ACPI_FAILURE(status)) {
 347                 return (status);
 348         }
 349
 350         /* Parse the entire method AML including deferred operators */
 351
 352         walk_state->parse_flags &= ~ACPI_PARSE_DELETE_TREE;
 353         walk_state->parse_flags |= ACPI_PARSE_DISASSEMBLE;
 354
 355         status = acpi_ps_parse_aml(walk_state);
 356
 357 #ifdef ACPI_DISASSEMBLER
 358         (void)acpi_dm_parse_deferred_ops(op);
 359
 360         /* Now we can disassemble the method */
 361
 362         acpi_gbl_dm_opt_verbose = FALSE;
 363         acpi_dm_disassemble(NULL, op, 0);
 364         acpi_gbl_dm_opt_verbose = TRUE;
 365 #endif
 366
 367         acpi_ps_delete_parse_tree(op);
 368
 369         /* Method cleanup */
 370
 371         acpi_ns_delete_namespace_subtree(method);
 372         acpi_ns_delete_namespace_by_owner(obj_desc->method.owner_id);
 373         acpi_ut_release_owner_id(&obj_desc->method.owner_id);
 374         return (AE_OK);
 375 }
 376
 377 /*******************************************************************************
 378  *
 379  * FUNCTION:    acpi_db_walk_for_execute
 380  *
 381  * PARAMETERS:  Callback from walk_namespace
 382  *
 383  * RETURN:      Status
 384  *
 385  * DESCRIPTION: Batch execution module. Currently only executes predefined
 386  *              ACPI names.
 387  *
 388  ******************************************************************************/
 389
 390 static acpi_status
 391 acpi_db_walk_for_execute(acpi_handle obj_handle,
 392                          u32 nesting_level, void *context, void **return_value)
 393 {
 394         struct acpi_namespace_node *node =
 395             (struct acpi_namespace_node *)obj_handle;
 396         struct acpi_db_execute_walk *info =
 397             (struct acpi_db_execute_walk *)context;
 398         struct acpi_buffer return_obj;
 399         acpi_status status;
 400         char *pathname;
 401         u32 i;
 402         struct acpi_device_info *obj_info;
 403         struct acpi_object_list param_objects;
 404         union acpi_object params[ACPI_METHOD_NUM_ARGS];
 405         const union acpi_predefined_info *predefined;
 406
 407         predefined = acpi_ut_match_predefined_method(node->name.ascii);
 408         if (!predefined) {
 409                 return (AE_OK);
 410         }
 411
 412         if (node->type == ACPI_TYPE_LOCAL_SCOPE) {
 413                 return (AE_OK);
 414         }
 415
 416         pathname = acpi_ns_get_external_pathname(node);
 417         if (!pathname) {
 418                 return (AE_OK);
 419         }
 420
 421         /* Get the object info for number of method parameters */
 422
 423         status = acpi_get_object_info(obj_handle, &obj_info);
 424         if (ACPI_FAILURE(status)) {
 425                 return (status);
 426         }
 427
 428         param_objects.pointer = NULL;
 429         param_objects.count = 0;
 430
 431         if (obj_info->type == ACPI_TYPE_METHOD) {
 432
 433                 /* Setup default parameters */
 434
 435                 for (i = 0; i < obj_info->param_count; i++) {
 436                         params[i].type = ACPI_TYPE_INTEGER;
 437                         params[i].integer.value = 1;
 438                 }
 439
 440                 param_objects.pointer = params;
 441                 param_objects.count = obj_info->param_count;
 442         }
 443
 444         ACPI_FREE(obj_info);
 445         return_obj.pointer = NULL;
 446         return_obj.length = ACPI_ALLOCATE_BUFFER;
 447
 448         /* Do the actual method execution */
 449
 450         acpi_gbl_method_executing = TRUE;
 451
 452         status = acpi_evaluate_object(node, NULL, &param_objects, &return_obj);
 453
 454         acpi_os_printf("%-32s returned %s\n", pathname,
 455                        acpi_format_exception(status));
 456         acpi_gbl_method_executing = FALSE;
 457         ACPI_FREE(pathname);
 458
 459         /* Ignore status from method execution */
 460
 461         status = AE_OK;
 462
 463         /* Update count, check if we have executed enough methods */
 464
 465         info->count++;
 466         if (info->count >= info->max_count) {
 467                 status = AE_CTRL_TERMINATE;
 468         }
 469
 470         return (status);
 471 }
 472
 473 /*******************************************************************************
 474  *
 475  * FUNCTION:    acpi_db_evaluate_predefined_names
 476  *
 477  * PARAMETERS:  None
 478  *
 479  * RETURN:      None
 480  *
 481  * DESCRIPTION: Namespace batch execution. Execute predefined names in the
 482  *              namespace, up to the max count, if specified.
 483  *
 484  ******************************************************************************/
 485
 486 void acpi_db_evaluate_predefined_names(void)
 487 {
 488         struct acpi_db_execute_walk info;
 489
 490         info.count = 0;
 491         info.max_count = ACPI_UINT32_MAX;
 492
 493         /* Search all nodes in namespace */
 494
 495         (void)acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
 496                                   ACPI_UINT32_MAX, acpi_db_walk_for_execute,
 497                                   NULL, (void *)&info, NULL);
 498
 499         acpi_os_printf("Evaluated %u predefined names in the namespace\n",
 500                        info.count);
 501 }