Revert "ACPICA: Namespace: Fix namespace/interpreter lock ordering"
[cascardo/linux.git] / drivers / acpi / acpica / nsparse.c
1 /******************************************************************************
2  *
3  * Module Name: nsparse - namespace interface to AML parser
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2016, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include "accommon.h"
46 #include "acnamesp.h"
47 #include "acparser.h"
48 #include "acdispat.h"
49 #include "actables.h"
50 #include "acinterp.h"
51
52 #define _COMPONENT          ACPI_NAMESPACE
53 ACPI_MODULE_NAME("nsparse")
54
55 /*******************************************************************************
56  *
57  * FUNCTION:    ns_one_complete_parse
58  *
59  * PARAMETERS:  pass_number             - 1 or 2
60  *              table_desc              - The table to be parsed.
61  *
62  * RETURN:      Status
63  *
64  * DESCRIPTION: Perform one complete parse of an ACPI/AML table.
65  *
66  ******************************************************************************/
67 acpi_status
68 acpi_ns_one_complete_parse(u32 pass_number,
69                            u32 table_index,
70                            struct acpi_namespace_node *start_node)
71 {
72         union acpi_parse_object *parse_root;
73         acpi_status status;
74         u32 aml_length;
75         u8 *aml_start;
76         struct acpi_walk_state *walk_state;
77         struct acpi_table_header *table;
78         acpi_owner_id owner_id;
79
80         ACPI_FUNCTION_TRACE(ns_one_complete_parse);
81
82         status = acpi_get_table_by_index(table_index, &table);
83         if (ACPI_FAILURE(status)) {
84                 return_ACPI_STATUS(status);
85         }
86
87         /* Table must consist of at least a complete header */
88
89         if (table->length < sizeof(struct acpi_table_header)) {
90                 return_ACPI_STATUS(AE_BAD_HEADER);
91         }
92
93         aml_start = (u8 *)table + sizeof(struct acpi_table_header);
94         aml_length = table->length - sizeof(struct acpi_table_header);
95
96         status = acpi_tb_get_owner_id(table_index, &owner_id);
97         if (ACPI_FAILURE(status)) {
98                 return_ACPI_STATUS(status);
99         }
100
101         /* Create and init a Root Node */
102
103         parse_root = acpi_ps_create_scope_op(aml_start);
104         if (!parse_root) {
105                 return_ACPI_STATUS(AE_NO_MEMORY);
106         }
107
108         /* Create and initialize a new walk state */
109
110         walk_state = acpi_ds_create_walk_state(owner_id, NULL, NULL, NULL);
111         if (!walk_state) {
112                 acpi_ps_free_op(parse_root);
113                 return_ACPI_STATUS(AE_NO_MEMORY);
114         }
115
116         status = acpi_ds_init_aml_walk(walk_state, parse_root, NULL,
117                                        aml_start, aml_length, NULL,
118                                        (u8)pass_number);
119         if (ACPI_FAILURE(status)) {
120                 acpi_ds_delete_walk_state(walk_state);
121                 goto cleanup;
122         }
123
124         /* Found OSDT table, enable the namespace override feature */
125
126         if (ACPI_COMPARE_NAME(table->signature, ACPI_SIG_OSDT) &&
127             pass_number == ACPI_IMODE_LOAD_PASS1) {
128                 walk_state->namespace_override = TRUE;
129         }
130
131         /* start_node is the default location to load the table */
132
133         if (start_node && start_node != acpi_gbl_root_node) {
134                 status =
135                     acpi_ds_scope_stack_push(start_node, ACPI_TYPE_METHOD,
136                                              walk_state);
137                 if (ACPI_FAILURE(status)) {
138                         acpi_ds_delete_walk_state(walk_state);
139                         goto cleanup;
140                 }
141         }
142
143         /* Parse the AML */
144
145         ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
146                           "*PARSE* pass %u parse\n", pass_number));
147         status = acpi_ps_parse_aml(walk_state);
148
149 cleanup:
150         acpi_ps_delete_parse_tree(parse_root);
151         return_ACPI_STATUS(status);
152 }
153
154 /*******************************************************************************
155  *
156  * FUNCTION:    acpi_ns_parse_table
157  *
158  * PARAMETERS:  table_desc      - An ACPI table descriptor for table to parse
159  *              start_node      - Where to enter the table into the namespace
160  *
161  * RETURN:      Status
162  *
163  * DESCRIPTION: Parse AML within an ACPI table and return a tree of ops
164  *
165  ******************************************************************************/
166
167 acpi_status
168 acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node)
169 {
170         acpi_status status;
171
172         ACPI_FUNCTION_TRACE(ns_parse_table);
173
174         acpi_ex_enter_interpreter();
175
176         /*
177          * AML Parse, pass 1
178          *
179          * In this pass, we load most of the namespace. Control methods
180          * are not parsed until later. A parse tree is not created. Instead,
181          * each Parser Op subtree is deleted when it is finished. This saves
182          * a great deal of memory, and allows a small cache of parse objects
183          * to service the entire parse. The second pass of the parse then
184          * performs another complete parse of the AML.
185          */
186         ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Start pass 1\n"));
187
188         status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS1,
189                                             table_index, start_node);
190         if (ACPI_FAILURE(status)) {
191                 goto error_exit;
192         }
193
194         /*
195          * AML Parse, pass 2
196          *
197          * In this pass, we resolve forward references and other things
198          * that could not be completed during the first pass.
199          * Another complete parse of the AML is performed, but the
200          * overhead of this is compensated for by the fact that the
201          * parse objects are all cached.
202          */
203         ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Start pass 2\n"));
204         status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS2,
205                                             table_index, start_node);
206         if (ACPI_FAILURE(status)) {
207                 goto error_exit;
208         }
209
210 error_exit:
211         acpi_ex_exit_interpreter();
212         return_ACPI_STATUS(status);
213 }