drivers/acpi/acpica/tbxfload.c

   1 /******************************************************************************
   2  *
   3  * Module Name: tbxfload - Table load/unload external interfaces
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2016, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #define EXPORT_ACPI_INTERFACES
  45
  46 #include <acpi/acpi.h>
  47 #include "accommon.h"
  48 #include "acnamesp.h"
  49 #include "actables.h"
  50 #include "acevents.h"
  51
  52 #define _COMPONENT          ACPI_TABLES
  53 ACPI_MODULE_NAME("tbxfload")
  54
  55 /*******************************************************************************
  56  *
  57  * FUNCTION:    acpi_load_tables
  58  *
  59  * PARAMETERS:  None
  60  *
  61  * RETURN:      Status
  62  *
  63  * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT
  64  *
  65  ******************************************************************************/
  66 acpi_status __init acpi_load_tables(void)
  67 {
  68         acpi_status status;
  69
  70         ACPI_FUNCTION_TRACE(acpi_load_tables);
  71
  72         /*
  73          * Install the default operation region handlers. These are the
  74          * handlers that are defined by the ACPI specification to be
  75          * "always accessible" -- namely, system_memory, system_IO, and
  76          * PCI_Config. This also means that no _REG methods need to be
  77          * run for these address spaces. We need to have these handlers
  78          * installed before any AML code can be executed, especially any
  79          * module-level code (11/2015).
  80          * Note that we allow OSPMs to install their own region handlers
  81          * between acpi_initialize_subsystem() and acpi_load_tables() to use
  82          * their customized default region handlers.
  83          */
  84         status = acpi_ev_install_region_handlers();
  85         if (ACPI_FAILURE(status)) {
  86                 ACPI_EXCEPTION((AE_INFO, status,
  87                                 "During Region initialization"));
  88                 return_ACPI_STATUS(status);
  89         }
  90
  91         /* Load the namespace from the tables */
  92
  93         status = acpi_tb_load_namespace();
  94
  95         /* Don't let single failures abort the load */
  96
  97         if (status == AE_CTRL_TERMINATE) {
  98                 status = AE_OK;
  99         }
 100
 101         if (ACPI_FAILURE(status)) {
 102                 ACPI_EXCEPTION((AE_INFO, status,
 103                                 "While loading namespace from ACPI tables"));
 104         }
 105
 106         if (!acpi_gbl_group_module_level_code) {
 107                 /*
 108                  * Initialize the objects that remain uninitialized. This
 109                  * runs the executable AML that may be part of the
 110                  * declaration of these objects:
 111                  * operation_regions, buffer_fields, Buffers, and Packages.
 112                  */
 113                 status = acpi_ns_initialize_objects();
 114                 if (ACPI_FAILURE(status)) {
 115                         return_ACPI_STATUS(status);
 116                 }
 117         }
 118
 119         acpi_gbl_namespace_initialized = TRUE;
 120         return_ACPI_STATUS(status);
 121 }
 122
 123 ACPI_EXPORT_SYMBOL_INIT(acpi_load_tables)
 124
 125 /*******************************************************************************
 126  *
 127  * FUNCTION:    acpi_tb_load_namespace
 128  *
 129  * PARAMETERS:  None
 130  *
 131  * RETURN:      Status
 132  *
 133  * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in
 134  *              the RSDT/XSDT.
 135  *
 136  ******************************************************************************/
 137 acpi_status acpi_tb_load_namespace(void)
 138 {
 139         acpi_status status;
 140         u32 i;
 141         struct acpi_table_header *new_dsdt;
 142         struct acpi_table_desc *table;
 143         u32 tables_loaded = 0;
 144         u32 tables_failed = 0;
 145
 146         ACPI_FUNCTION_TRACE(tb_load_namespace);
 147
 148         (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
 149
 150         /*
 151          * Load the namespace. The DSDT is required, but any SSDT and
 152          * PSDT tables are optional. Verify the DSDT.
 153          */
 154         table = &acpi_gbl_root_table_list.tables[acpi_gbl_dsdt_index];
 155
 156         if (!acpi_gbl_root_table_list.current_table_count ||
 157             !ACPI_COMPARE_NAME(table->signature.ascii, ACPI_SIG_DSDT) ||
 158             ACPI_FAILURE(acpi_tb_validate_table(table))) {
 159                 status = AE_NO_ACPI_TABLES;
 160                 goto unlock_and_exit;
 161         }
 162
 163         /*
 164          * Save the DSDT pointer for simple access. This is the mapped memory
 165          * address. We must take care here because the address of the .Tables
 166          * array can change dynamically as tables are loaded at run-time. Note:
 167          * .Pointer field is not validated until after call to acpi_tb_validate_table.
 168          */
 169         acpi_gbl_DSDT = table->pointer;
 170
 171         /*
 172          * Optionally copy the entire DSDT to local memory (instead of simply
 173          * mapping it.) There are some BIOSs that corrupt or replace the original
 174          * DSDT, creating the need for this option. Default is FALSE, do not copy
 175          * the DSDT.
 176          */
 177         if (acpi_gbl_copy_dsdt_locally) {
 178                 new_dsdt = acpi_tb_copy_dsdt(acpi_gbl_dsdt_index);
 179                 if (new_dsdt) {
 180                         acpi_gbl_DSDT = new_dsdt;
 181                 }
 182         }
 183
 184         /*
 185          * Save the original DSDT header for detection of table corruption
 186          * and/or replacement of the DSDT from outside the OS.
 187          */
 188         memcpy(&acpi_gbl_original_dsdt_header, acpi_gbl_DSDT,
 189                sizeof(struct acpi_table_header));
 190
 191         (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
 192
 193         /* Load and parse tables */
 194
 195         status = acpi_ns_load_table(acpi_gbl_dsdt_index, acpi_gbl_root_node);
 196         if (ACPI_FAILURE(status)) {
 197                 ACPI_EXCEPTION((AE_INFO, status, "[DSDT] table load failed"));
 198                 tables_failed++;
 199         } else {
 200                 tables_loaded++;
 201         }
 202
 203         /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */
 204
 205         (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
 206         for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) {
 207                 table = &acpi_gbl_root_table_list.tables[i];
 208
 209                 if (!acpi_gbl_root_table_list.tables[i].address ||
 210                     (!ACPI_COMPARE_NAME(table->signature.ascii, ACPI_SIG_SSDT)
 211                      && !ACPI_COMPARE_NAME(table->signature.ascii,
 212                                            ACPI_SIG_PSDT)
 213                      && !ACPI_COMPARE_NAME(table->signature.ascii,
 214                                            ACPI_SIG_OSDT))
 215                     || ACPI_FAILURE(acpi_tb_validate_table(table))) {
 216                         continue;
 217                 }
 218
 219                 /* Ignore errors while loading tables, get as many as possible */
 220
 221                 (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
 222                 status = acpi_ns_load_table(i, acpi_gbl_root_node);
 223                 if (ACPI_FAILURE(status)) {
 224                         ACPI_EXCEPTION((AE_INFO, status,
 225                                         "(%4.4s:%8.8s) while loading table",
 226                                         table->signature.ascii,
 227                                         table->pointer->oem_table_id));
 228
 229                         tables_failed++;
 230
 231                         ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
 232                                               "Table [%4.4s:%8.8s] (id FF) - Table namespace load failed\n\n",
 233                                               table->signature.ascii,
 234                                               table->pointer->oem_table_id));
 235                 } else {
 236                         tables_loaded++;
 237                 }
 238
 239                 (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
 240         }
 241
 242         if (!tables_failed) {
 243                 ACPI_INFO(("%u ACPI AML tables successfully acquired and loaded\n", tables_loaded));
 244         } else {
 245                 ACPI_ERROR((AE_INFO,
 246                             "%u table load failures, %u successful",
 247                             tables_failed, tables_loaded));
 248
 249                 /* Indicate at least one failure */
 250
 251                 status = AE_CTRL_TERMINATE;
 252         }
 253
 254 unlock_and_exit:
 255         (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
 256         return_ACPI_STATUS(status);
 257 }
 258
 259 /*******************************************************************************
 260  *
 261  * FUNCTION:    acpi_install_table
 262  *
 263  * PARAMETERS:  address             - Address of the ACPI table to be installed.
 264  *              physical            - Whether the address is a physical table
 265  *                                    address or not
 266  *
 267  * RETURN:      Status
 268  *
 269  * DESCRIPTION: Dynamically install an ACPI table.
 270  *              Note: This function should only be invoked after
 271  *                    acpi_initialize_tables() and before acpi_load_tables().
 272  *
 273  ******************************************************************************/
 274
 275 acpi_status __init
 276 acpi_install_table(acpi_physical_address address, u8 physical)
 277 {
 278         acpi_status status;
 279         u8 flags;
 280         u32 table_index;
 281
 282         ACPI_FUNCTION_TRACE(acpi_install_table);
 283
 284         if (physical) {
 285                 flags = ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL;
 286         } else {
 287                 flags = ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL;
 288         }
 289
 290         status = acpi_tb_install_standard_table(address, flags,
 291                                                 FALSE, FALSE, &table_index);
 292
 293         return_ACPI_STATUS(status);
 294 }
 295
 296 ACPI_EXPORT_SYMBOL_INIT(acpi_install_table)
 297
 298 /*******************************************************************************
 299  *
 300  * FUNCTION:    acpi_load_table
 301  *
 302  * PARAMETERS:  table               - Pointer to a buffer containing the ACPI
 303  *                                    table to be loaded.
 304  *
 305  * RETURN:      Status
 306  *
 307  * DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must
 308  *              be a valid ACPI table with a valid ACPI table header.
 309  *              Note1: Mainly intended to support hotplug addition of SSDTs.
 310  *              Note2: Does not copy the incoming table. User is responsible
 311  *              to ensure that the table is not deleted or unmapped.
 312  *
 313  ******************************************************************************/
 314 acpi_status acpi_load_table(struct acpi_table_header *table)
 315 {
 316         acpi_status status;
 317         u32 table_index;
 318
 319         ACPI_FUNCTION_TRACE(acpi_load_table);
 320
 321         /* Parameter validation */
 322
 323         if (!table) {
 324                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 325         }
 326
 327         /* Must acquire the interpreter lock during this operation */
 328
 329         status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
 330         if (ACPI_FAILURE(status)) {
 331                 return_ACPI_STATUS(status);
 332         }
 333
 334         /* Install the table and load it into the namespace */
 335
 336         ACPI_INFO(("Host-directed Dynamic ACPI Table Load:"));
 337         (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
 338
 339         status = acpi_tb_install_standard_table(ACPI_PTR_TO_PHYSADDR(table),
 340                                                 ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL,
 341                                                 TRUE, FALSE, &table_index);
 342
 343         (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
 344         if (ACPI_FAILURE(status)) {
 345                 goto unlock_and_exit;
 346         }
 347
 348         /*
 349          * Note: Now table is "INSTALLED", it must be validated before
 350          * using.
 351          */
 352         status =
 353             acpi_tb_validate_table(&acpi_gbl_root_table_list.
 354                                    tables[table_index]);
 355         if (ACPI_FAILURE(status)) {
 356                 goto unlock_and_exit;
 357         }
 358
 359         status = acpi_ns_load_table(table_index, acpi_gbl_root_node);
 360
 361         /* Invoke table handler if present */
 362
 363         if (acpi_gbl_table_handler) {
 364                 (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_LOAD, table,
 365                                              acpi_gbl_table_handler_context);
 366         }
 367
 368 unlock_and_exit:
 369         (void)acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
 370         return_ACPI_STATUS(status);
 371 }
 372
 373 ACPI_EXPORT_SYMBOL(acpi_load_table)
 374
 375 /*******************************************************************************
 376  *
 377  * FUNCTION:    acpi_unload_parent_table
 378  *
 379  * PARAMETERS:  object              - Handle to any namespace object owned by
 380  *                                    the table to be unloaded
 381  *
 382  * RETURN:      Status
 383  *
 384  * DESCRIPTION: Via any namespace object within an SSDT or OEMx table, unloads
 385  *              the table and deletes all namespace objects associated with
 386  *              that table. Unloading of the DSDT is not allowed.
 387  *              Note: Mainly intended to support hotplug removal of SSDTs.
 388  *
 389  ******************************************************************************/
 390 acpi_status acpi_unload_parent_table(acpi_handle object)
 391 {
 392         struct acpi_namespace_node *node =
 393             ACPI_CAST_PTR(struct acpi_namespace_node, object);
 394         acpi_status status = AE_NOT_EXIST;
 395         acpi_owner_id owner_id;
 396         u32 i;
 397
 398         ACPI_FUNCTION_TRACE(acpi_unload_parent_table);
 399
 400         /* Parameter validation */
 401
 402         if (!object) {
 403                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 404         }
 405
 406         /*
 407          * The node owner_id is currently the same as the parent table ID.
 408          * However, this could change in the future.
 409          */
 410         owner_id = node->owner_id;
 411         if (!owner_id) {
 412
 413                 /* owner_id==0 means DSDT is the owner. DSDT cannot be unloaded */
 414
 415                 return_ACPI_STATUS(AE_TYPE);
 416         }
 417
 418         /* Must acquire the interpreter lock during this operation */
 419
 420         status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
 421         if (ACPI_FAILURE(status)) {
 422                 return_ACPI_STATUS(status);
 423         }
 424
 425         /* Find the table in the global table list */
 426
 427         for (i = 0; i < acpi_gbl_root_table_list.current_table_count; i++) {
 428                 if (owner_id != acpi_gbl_root_table_list.tables[i].owner_id) {
 429                         continue;
 430                 }
 431
 432                 /*
 433                  * Allow unload of SSDT and OEMx tables only. Do not allow unload
 434                  * of the DSDT. No other types of tables should get here, since
 435                  * only these types can contain AML and thus are the only types
 436                  * that can create namespace objects.
 437                  */
 438                 if (ACPI_COMPARE_NAME
 439                     (acpi_gbl_root_table_list.tables[i].signature.ascii,
 440                      ACPI_SIG_DSDT)) {
 441                         status = AE_TYPE;
 442                         break;
 443                 }
 444
 445                 /* Ensure the table is actually loaded */
 446
 447                 if (!acpi_tb_is_table_loaded(i)) {
 448                         status = AE_NOT_EXIST;
 449                         break;
 450                 }
 451
 452                 /* Invoke table handler if present */
 453
 454                 if (acpi_gbl_table_handler) {
 455                         (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_UNLOAD,
 456                                                      acpi_gbl_root_table_list.
 457                                                      tables[i].pointer,
 458                                                      acpi_gbl_table_handler_context);
 459                 }
 460
 461                 /*
 462                  * Delete all namespace objects owned by this table. Note that
 463                  * these objects can appear anywhere in the namespace by virtue
 464                  * of the AML "Scope" operator. Thus, we need to track ownership
 465                  * by an ID, not simply a position within the hierarchy.
 466                  */
 467                 status = acpi_tb_delete_namespace_by_owner(i);
 468                 if (ACPI_FAILURE(status)) {
 469                         break;
 470                 }
 471
 472                 status = acpi_tb_release_owner_id(i);
 473                 acpi_tb_set_table_loaded_flag(i, FALSE);
 474                 break;
 475         }
 476
 477         (void)acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
 478         return_ACPI_STATUS(status);
 479 }
 480
 481 ACPI_EXPORT_SYMBOL(acpi_unload_parent_table)