3 * Generic Bluetooth USB driver
5 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/module.h>
25 #include <linux/usb.h>
26 #include <linux/firmware.h>
27 #include <asm/unaligned.h>
29 #include <net/bluetooth/bluetooth.h>
30 #include <net/bluetooth/hci_core.h>
38 static bool disable_scofix;
39 static bool force_scofix;
41 static bool reset = true;
43 static struct usb_driver btusb_driver;
45 #define BTUSB_IGNORE 0x01
46 #define BTUSB_DIGIANSWER 0x02
47 #define BTUSB_CSR 0x04
48 #define BTUSB_SNIFFER 0x08
49 #define BTUSB_BCM92035 0x10
50 #define BTUSB_BROKEN_ISOC 0x20
51 #define BTUSB_WRONG_SCO_MTU 0x40
52 #define BTUSB_ATH3012 0x80
53 #define BTUSB_INTEL 0x100
54 #define BTUSB_INTEL_BOOT 0x200
55 #define BTUSB_BCM_PATCHRAM 0x400
56 #define BTUSB_MARVELL 0x800
57 #define BTUSB_SWAVE 0x1000
58 #define BTUSB_INTEL_NEW 0x2000
59 #define BTUSB_AMP 0x4000
60 #define BTUSB_QCA_ROME 0x8000
61 #define BTUSB_BCM_APPLE 0x10000
62 #define BTUSB_REALTEK 0x20000
63 #define BTUSB_BCM2045 0x40000
64 #define BTUSB_IFNUM_2 0x80000
66 static const struct usb_device_id btusb_table[] = {
67 /* Generic Bluetooth USB device */
68 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
70 /* Generic Bluetooth AMP device */
71 { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
73 /* Generic Bluetooth USB interface */
74 { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
76 /* Apple-specific (Broadcom) devices */
77 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
78 .driver_info = BTUSB_BCM_APPLE | BTUSB_IFNUM_2 },
80 /* MediaTek MT76x0E */
81 { USB_DEVICE(0x0e8d, 0x763f) },
83 /* Broadcom SoftSailing reporting vendor specific */
84 { USB_DEVICE(0x0a5c, 0x21e1) },
86 /* Apple MacBookPro 7,1 */
87 { USB_DEVICE(0x05ac, 0x8213) },
90 { USB_DEVICE(0x05ac, 0x8215) },
92 /* Apple MacBookPro6,2 */
93 { USB_DEVICE(0x05ac, 0x8218) },
95 /* Apple MacBookAir3,1, MacBookAir3,2 */
96 { USB_DEVICE(0x05ac, 0x821b) },
98 /* Apple MacBookAir4,1 */
99 { USB_DEVICE(0x05ac, 0x821f) },
101 /* Apple MacBookPro8,2 */
102 { USB_DEVICE(0x05ac, 0x821a) },
104 /* Apple MacMini5,1 */
105 { USB_DEVICE(0x05ac, 0x8281) },
107 /* AVM BlueFRITZ! USB v2.0 */
108 { USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE },
110 /* Bluetooth Ultraport Module from IBM */
111 { USB_DEVICE(0x04bf, 0x030a) },
113 /* ALPS Modules with non-standard id */
114 { USB_DEVICE(0x044e, 0x3001) },
115 { USB_DEVICE(0x044e, 0x3002) },
117 /* Ericsson with non-standard id */
118 { USB_DEVICE(0x0bdb, 0x1002) },
120 /* Canyon CN-BTU1 with HID interfaces */
121 { USB_DEVICE(0x0c10, 0x0000) },
123 /* Broadcom BCM20702A0 */
124 { USB_DEVICE(0x413c, 0x8197) },
126 /* Broadcom BCM20702B0 (Dynex/Insignia) */
127 { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
129 /* Broadcom BCM43142A0 (Foxconn/Lenovo) */
130 { USB_DEVICE(0x105b, 0xe065), .driver_info = BTUSB_BCM_PATCHRAM },
132 /* Foxconn - Hon Hai */
133 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
134 .driver_info = BTUSB_BCM_PATCHRAM },
136 /* Lite-On Technology - Broadcom based */
137 { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
138 .driver_info = BTUSB_BCM_PATCHRAM },
140 /* Broadcom devices with vendor specific id */
141 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
142 .driver_info = BTUSB_BCM_PATCHRAM },
144 /* ASUSTek Computer - Broadcom based */
145 { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
146 .driver_info = BTUSB_BCM_PATCHRAM },
148 /* Belkin F8065bf - Broadcom based */
149 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
150 .driver_info = BTUSB_BCM_PATCHRAM },
152 /* IMC Networks - Broadcom based */
153 { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
154 .driver_info = BTUSB_BCM_PATCHRAM },
156 /* Toshiba Corp - Broadcom based */
157 { USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
158 .driver_info = BTUSB_BCM_PATCHRAM },
160 /* Intel Bluetooth USB Bootloader (RAM module) */
161 { USB_DEVICE(0x8087, 0x0a5a),
162 .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
164 { } /* Terminating entry */
167 MODULE_DEVICE_TABLE(usb, btusb_table);
169 static const struct usb_device_id blacklist_table[] = {
170 /* CSR BlueCore devices */
171 { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },
173 /* Broadcom BCM2033 without firmware */
174 { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
176 /* Broadcom BCM2045 devices */
177 { USB_DEVICE(0x0a5c, 0x2045), .driver_info = BTUSB_BCM2045 },
179 /* Atheros 3011 with sflash firmware */
180 { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
181 { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
182 { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
183 { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
184 { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
185 { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
186 { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
188 /* Atheros AR9285 Malbec with sflash firmware */
189 { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
191 /* Atheros 3012 with sflash firmware */
192 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
193 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
194 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
195 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
196 { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
197 { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
198 { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
199 { USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 },
200 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
201 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
202 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
203 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
204 { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
205 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
206 { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
207 { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
208 { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
209 { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
210 { USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
211 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
212 { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
213 { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
214 { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
215 { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
216 { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
217 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
218 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
219 { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
220 { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
221 { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
222 { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
223 { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
224 { USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 },
225 { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
226 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
227 { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
228 { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
229 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
230 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
231 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
232 { USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 },
233 { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
234 { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
235 { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
236 { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
237 { USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
238 { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
239 { USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
240 { USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 },
242 /* Atheros AR5BBU12 with sflash firmware */
243 { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
245 /* Atheros AR5BBU12 with sflash firmware */
246 { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
247 { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
249 /* QCA ROME chipset */
250 { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
251 { USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME },
252 { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
253 { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
254 { USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME },
256 /* Broadcom BCM2035 */
257 { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
258 { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
259 { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
261 /* Broadcom BCM2045 */
262 { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU },
263 { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU },
265 /* IBM/Lenovo ThinkPad with Broadcom chip */
266 { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU },
267 { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU },
269 /* HP laptop with Broadcom chip */
270 { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU },
272 /* Dell laptop with Broadcom chip */
273 { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU },
275 /* Dell Wireless 370 and 410 devices */
276 { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU },
277 { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU },
279 /* Belkin F8T012 and F8T013 devices */
280 { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU },
281 { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU },
283 /* Asus WL-BTD202 device */
284 { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },
286 /* Kensington Bluetooth USB adapter */
287 { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU },
289 /* RTX Telecom based adapters with buggy SCO support */
290 { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
291 { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
293 /* CONWISE Technology based adapters with buggy SCO support */
294 { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
296 /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
297 { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
299 /* Digianswer devices */
300 { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
301 { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
303 /* CSR BlueCore Bluetooth Sniffer */
304 { USB_DEVICE(0x0a12, 0x0002),
305 .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
307 /* Frontline ComProbe Bluetooth Sniffer */
308 { USB_DEVICE(0x16d3, 0x0002),
309 .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
311 /* Marvell Bluetooth devices */
312 { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
313 { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
315 /* Intel Bluetooth devices */
316 { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
317 { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
318 { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
319 { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },
320 { USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL },
322 /* Other Intel Bluetooth devices */
323 { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
324 .driver_info = BTUSB_IGNORE },
326 /* Realtek Bluetooth devices */
327 { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
328 .driver_info = BTUSB_REALTEK },
330 /* Additional Realtek 8723AE Bluetooth devices */
331 { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
332 { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
334 /* Additional Realtek 8723BE Bluetooth devices */
335 { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
336 { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
337 { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
338 { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
339 { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
341 /* Additional Realtek 8821AE Bluetooth devices */
342 { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
343 { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
344 { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
345 { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
346 { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
348 /* Silicon Wave based devices */
349 { USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
351 { } /* Terminating entry */
354 #define BTUSB_MAX_ISOC_FRAMES 10
356 #define BTUSB_INTR_RUNNING 0
357 #define BTUSB_BULK_RUNNING 1
358 #define BTUSB_ISOC_RUNNING 2
359 #define BTUSB_SUSPENDING 3
360 #define BTUSB_DID_ISO_RESUME 4
361 #define BTUSB_BOOTLOADER 5
362 #define BTUSB_DOWNLOADING 6
363 #define BTUSB_FIRMWARE_LOADED 7
364 #define BTUSB_FIRMWARE_FAILED 8
365 #define BTUSB_BOOTING 9
366 #define BTUSB_RESET_RESUME 10
367 #define BTUSB_DIAG_RUNNING 11
370 struct hci_dev *hdev;
371 struct usb_device *udev;
372 struct usb_interface *intf;
373 struct usb_interface *isoc;
374 struct usb_interface *diag;
378 struct work_struct work;
379 struct work_struct waker;
381 struct usb_anchor deferred;
382 struct usb_anchor tx_anchor;
386 struct usb_anchor intr_anchor;
387 struct usb_anchor bulk_anchor;
388 struct usb_anchor isoc_anchor;
389 struct usb_anchor diag_anchor;
392 struct sk_buff *evt_skb;
393 struct sk_buff *acl_skb;
394 struct sk_buff *sco_skb;
396 struct usb_endpoint_descriptor *intr_ep;
397 struct usb_endpoint_descriptor *bulk_tx_ep;
398 struct usb_endpoint_descriptor *bulk_rx_ep;
399 struct usb_endpoint_descriptor *isoc_tx_ep;
400 struct usb_endpoint_descriptor *isoc_rx_ep;
401 struct usb_endpoint_descriptor *diag_tx_ep;
402 struct usb_endpoint_descriptor *diag_rx_ep;
407 unsigned int sco_num;
411 int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
412 int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
414 int (*setup_on_usb)(struct hci_dev *hdev);
417 static inline void btusb_free_frags(struct btusb_data *data)
421 spin_lock_irqsave(&data->rxlock, flags);
423 kfree_skb(data->evt_skb);
424 data->evt_skb = NULL;
426 kfree_skb(data->acl_skb);
427 data->acl_skb = NULL;
429 kfree_skb(data->sco_skb);
430 data->sco_skb = NULL;
432 spin_unlock_irqrestore(&data->rxlock, flags);
435 static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
440 spin_lock(&data->rxlock);
447 skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC);
453 hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
454 hci_skb_expect(skb) = HCI_EVENT_HDR_SIZE;
457 len = min_t(uint, hci_skb_expect(skb), count);
458 memcpy(skb_put(skb, len), buffer, len);
462 hci_skb_expect(skb) -= len;
464 if (skb->len == HCI_EVENT_HDR_SIZE) {
465 /* Complete event header */
466 hci_skb_expect(skb) = hci_event_hdr(skb)->plen;
468 if (skb_tailroom(skb) < hci_skb_expect(skb)) {
477 if (!hci_skb_expect(skb)) {
479 data->recv_event(data->hdev, skb);
485 spin_unlock(&data->rxlock);
490 static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
495 spin_lock(&data->rxlock);
502 skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
508 hci_skb_pkt_type(skb) = HCI_ACLDATA_PKT;
509 hci_skb_expect(skb) = HCI_ACL_HDR_SIZE;
512 len = min_t(uint, hci_skb_expect(skb), count);
513 memcpy(skb_put(skb, len), buffer, len);
517 hci_skb_expect(skb) -= len;
519 if (skb->len == HCI_ACL_HDR_SIZE) {
520 __le16 dlen = hci_acl_hdr(skb)->dlen;
522 /* Complete ACL header */
523 hci_skb_expect(skb) = __le16_to_cpu(dlen);
525 if (skb_tailroom(skb) < hci_skb_expect(skb)) {
534 if (!hci_skb_expect(skb)) {
536 hci_recv_frame(data->hdev, skb);
542 spin_unlock(&data->rxlock);
547 static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
552 spin_lock(&data->rxlock);
559 skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC);
565 hci_skb_pkt_type(skb) = HCI_SCODATA_PKT;
566 hci_skb_expect(skb) = HCI_SCO_HDR_SIZE;
569 len = min_t(uint, hci_skb_expect(skb), count);
570 memcpy(skb_put(skb, len), buffer, len);
574 hci_skb_expect(skb) -= len;
576 if (skb->len == HCI_SCO_HDR_SIZE) {
577 /* Complete SCO header */
578 hci_skb_expect(skb) = hci_sco_hdr(skb)->dlen;
580 if (skb_tailroom(skb) < hci_skb_expect(skb)) {
589 if (!hci_skb_expect(skb)) {
591 hci_recv_frame(data->hdev, skb);
597 spin_unlock(&data->rxlock);
602 static void btusb_intr_complete(struct urb *urb)
604 struct hci_dev *hdev = urb->context;
605 struct btusb_data *data = hci_get_drvdata(hdev);
608 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
611 if (!test_bit(HCI_RUNNING, &hdev->flags))
614 if (urb->status == 0) {
615 hdev->stat.byte_rx += urb->actual_length;
617 if (btusb_recv_intr(data, urb->transfer_buffer,
618 urb->actual_length) < 0) {
619 BT_ERR("%s corrupted event packet", hdev->name);
622 } else if (urb->status == -ENOENT) {
623 /* Avoid suspend failed when usb_kill_urb */
627 if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
630 usb_mark_last_busy(data->udev);
631 usb_anchor_urb(urb, &data->intr_anchor);
633 err = usb_submit_urb(urb, GFP_ATOMIC);
635 /* -EPERM: urb is being killed;
636 * -ENODEV: device got disconnected */
637 if (err != -EPERM && err != -ENODEV)
638 BT_ERR("%s urb %p failed to resubmit (%d)",
639 hdev->name, urb, -err);
640 usb_unanchor_urb(urb);
644 static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
646 struct btusb_data *data = hci_get_drvdata(hdev);
652 BT_DBG("%s", hdev->name);
657 urb = usb_alloc_urb(0, mem_flags);
661 size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
663 buf = kmalloc(size, mem_flags);
669 pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress);
671 usb_fill_int_urb(urb, data->udev, pipe, buf, size,
672 btusb_intr_complete, hdev, data->intr_ep->bInterval);
674 urb->transfer_flags |= URB_FREE_BUFFER;
676 usb_anchor_urb(urb, &data->intr_anchor);
678 err = usb_submit_urb(urb, mem_flags);
680 if (err != -EPERM && err != -ENODEV)
681 BT_ERR("%s urb %p submission failed (%d)",
682 hdev->name, urb, -err);
683 usb_unanchor_urb(urb);
691 static void btusb_bulk_complete(struct urb *urb)
693 struct hci_dev *hdev = urb->context;
694 struct btusb_data *data = hci_get_drvdata(hdev);
697 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
700 if (!test_bit(HCI_RUNNING, &hdev->flags))
703 if (urb->status == 0) {
704 hdev->stat.byte_rx += urb->actual_length;
706 if (data->recv_bulk(data, urb->transfer_buffer,
707 urb->actual_length) < 0) {
708 BT_ERR("%s corrupted ACL packet", hdev->name);
711 } else if (urb->status == -ENOENT) {
712 /* Avoid suspend failed when usb_kill_urb */
716 if (!test_bit(BTUSB_BULK_RUNNING, &data->flags))
719 usb_anchor_urb(urb, &data->bulk_anchor);
720 usb_mark_last_busy(data->udev);
722 err = usb_submit_urb(urb, GFP_ATOMIC);
724 /* -EPERM: urb is being killed;
725 * -ENODEV: device got disconnected */
726 if (err != -EPERM && err != -ENODEV)
727 BT_ERR("%s urb %p failed to resubmit (%d)",
728 hdev->name, urb, -err);
729 usb_unanchor_urb(urb);
733 static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
735 struct btusb_data *data = hci_get_drvdata(hdev);
739 int err, size = HCI_MAX_FRAME_SIZE;
741 BT_DBG("%s", hdev->name);
743 if (!data->bulk_rx_ep)
746 urb = usb_alloc_urb(0, mem_flags);
750 buf = kmalloc(size, mem_flags);
756 pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);
758 usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
759 btusb_bulk_complete, hdev);
761 urb->transfer_flags |= URB_FREE_BUFFER;
763 usb_mark_last_busy(data->udev);
764 usb_anchor_urb(urb, &data->bulk_anchor);
766 err = usb_submit_urb(urb, mem_flags);
768 if (err != -EPERM && err != -ENODEV)
769 BT_ERR("%s urb %p submission failed (%d)",
770 hdev->name, urb, -err);
771 usb_unanchor_urb(urb);
779 static void btusb_isoc_complete(struct urb *urb)
781 struct hci_dev *hdev = urb->context;
782 struct btusb_data *data = hci_get_drvdata(hdev);
785 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
788 if (!test_bit(HCI_RUNNING, &hdev->flags))
791 if (urb->status == 0) {
792 for (i = 0; i < urb->number_of_packets; i++) {
793 unsigned int offset = urb->iso_frame_desc[i].offset;
794 unsigned int length = urb->iso_frame_desc[i].actual_length;
796 if (urb->iso_frame_desc[i].status)
799 hdev->stat.byte_rx += length;
801 if (btusb_recv_isoc(data, urb->transfer_buffer + offset,
803 BT_ERR("%s corrupted SCO packet", hdev->name);
807 } else if (urb->status == -ENOENT) {
808 /* Avoid suspend failed when usb_kill_urb */
812 if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
815 usb_anchor_urb(urb, &data->isoc_anchor);
817 err = usb_submit_urb(urb, GFP_ATOMIC);
819 /* -EPERM: urb is being killed;
820 * -ENODEV: device got disconnected */
821 if (err != -EPERM && err != -ENODEV)
822 BT_ERR("%s urb %p failed to resubmit (%d)",
823 hdev->name, urb, -err);
824 usb_unanchor_urb(urb);
828 static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
832 BT_DBG("len %d mtu %d", len, mtu);
834 for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
835 i++, offset += mtu, len -= mtu) {
836 urb->iso_frame_desc[i].offset = offset;
837 urb->iso_frame_desc[i].length = mtu;
840 if (len && i < BTUSB_MAX_ISOC_FRAMES) {
841 urb->iso_frame_desc[i].offset = offset;
842 urb->iso_frame_desc[i].length = len;
846 urb->number_of_packets = i;
849 static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
851 struct btusb_data *data = hci_get_drvdata(hdev);
857 BT_DBG("%s", hdev->name);
859 if (!data->isoc_rx_ep)
862 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
866 size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
867 BTUSB_MAX_ISOC_FRAMES;
869 buf = kmalloc(size, mem_flags);
875 pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
877 usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete,
878 hdev, data->isoc_rx_ep->bInterval);
880 urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
882 __fill_isoc_descriptor(urb, size,
883 le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
885 usb_anchor_urb(urb, &data->isoc_anchor);
887 err = usb_submit_urb(urb, mem_flags);
889 if (err != -EPERM && err != -ENODEV)
890 BT_ERR("%s urb %p submission failed (%d)",
891 hdev->name, urb, -err);
892 usb_unanchor_urb(urb);
900 static void btusb_diag_complete(struct urb *urb)
902 struct hci_dev *hdev = urb->context;
903 struct btusb_data *data = hci_get_drvdata(hdev);
906 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
909 if (urb->status == 0) {
912 skb = bt_skb_alloc(urb->actual_length, GFP_ATOMIC);
914 memcpy(skb_put(skb, urb->actual_length),
915 urb->transfer_buffer, urb->actual_length);
916 hci_recv_diag(hdev, skb);
918 } else if (urb->status == -ENOENT) {
919 /* Avoid suspend failed when usb_kill_urb */
923 if (!test_bit(BTUSB_DIAG_RUNNING, &data->flags))
926 usb_anchor_urb(urb, &data->diag_anchor);
927 usb_mark_last_busy(data->udev);
929 err = usb_submit_urb(urb, GFP_ATOMIC);
931 /* -EPERM: urb is being killed;
932 * -ENODEV: device got disconnected */
933 if (err != -EPERM && err != -ENODEV)
934 BT_ERR("%s urb %p failed to resubmit (%d)",
935 hdev->name, urb, -err);
936 usb_unanchor_urb(urb);
940 static int btusb_submit_diag_urb(struct hci_dev *hdev, gfp_t mem_flags)
942 struct btusb_data *data = hci_get_drvdata(hdev);
946 int err, size = HCI_MAX_FRAME_SIZE;
948 BT_DBG("%s", hdev->name);
950 if (!data->diag_rx_ep)
953 urb = usb_alloc_urb(0, mem_flags);
957 buf = kmalloc(size, mem_flags);
963 pipe = usb_rcvbulkpipe(data->udev, data->diag_rx_ep->bEndpointAddress);
965 usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
966 btusb_diag_complete, hdev);
968 urb->transfer_flags |= URB_FREE_BUFFER;
970 usb_mark_last_busy(data->udev);
971 usb_anchor_urb(urb, &data->diag_anchor);
973 err = usb_submit_urb(urb, mem_flags);
975 if (err != -EPERM && err != -ENODEV)
976 BT_ERR("%s urb %p submission failed (%d)",
977 hdev->name, urb, -err);
978 usb_unanchor_urb(urb);
986 static void btusb_tx_complete(struct urb *urb)
988 struct sk_buff *skb = urb->context;
989 struct hci_dev *hdev = (struct hci_dev *)skb->dev;
990 struct btusb_data *data = hci_get_drvdata(hdev);
992 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
995 if (!test_bit(HCI_RUNNING, &hdev->flags))
999 hdev->stat.byte_tx += urb->transfer_buffer_length;
1001 hdev->stat.err_tx++;
1004 spin_lock(&data->txlock);
1005 data->tx_in_flight--;
1006 spin_unlock(&data->txlock);
1008 kfree(urb->setup_packet);
1013 static void btusb_isoc_tx_complete(struct urb *urb)
1015 struct sk_buff *skb = urb->context;
1016 struct hci_dev *hdev = (struct hci_dev *)skb->dev;
1018 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1019 urb->actual_length);
1021 if (!test_bit(HCI_RUNNING, &hdev->flags))
1025 hdev->stat.byte_tx += urb->transfer_buffer_length;
1027 hdev->stat.err_tx++;
1030 kfree(urb->setup_packet);
1035 static int btusb_open(struct hci_dev *hdev)
1037 struct btusb_data *data = hci_get_drvdata(hdev);
1040 BT_DBG("%s", hdev->name);
1042 /* Patching USB firmware files prior to starting any URBs of HCI path
1043 * It is more safe to use USB bulk channel for downloading USB patch
1045 if (data->setup_on_usb) {
1046 err = data->setup_on_usb(hdev);
1051 err = usb_autopm_get_interface(data->intf);
1055 data->intf->needs_remote_wakeup = 1;
1057 if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
1060 err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
1064 err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
1066 usb_kill_anchored_urbs(&data->intr_anchor);
1070 set_bit(BTUSB_BULK_RUNNING, &data->flags);
1071 btusb_submit_bulk_urb(hdev, GFP_KERNEL);
1074 if (!btusb_submit_diag_urb(hdev, GFP_KERNEL))
1075 set_bit(BTUSB_DIAG_RUNNING, &data->flags);
1079 usb_autopm_put_interface(data->intf);
1083 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
1084 usb_autopm_put_interface(data->intf);
1088 static void btusb_stop_traffic(struct btusb_data *data)
1090 usb_kill_anchored_urbs(&data->intr_anchor);
1091 usb_kill_anchored_urbs(&data->bulk_anchor);
1092 usb_kill_anchored_urbs(&data->isoc_anchor);
1093 usb_kill_anchored_urbs(&data->diag_anchor);
1096 static int btusb_close(struct hci_dev *hdev)
1098 struct btusb_data *data = hci_get_drvdata(hdev);
1101 BT_DBG("%s", hdev->name);
1103 cancel_work_sync(&data->work);
1104 cancel_work_sync(&data->waker);
1106 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1107 clear_bit(BTUSB_BULK_RUNNING, &data->flags);
1108 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
1109 clear_bit(BTUSB_DIAG_RUNNING, &data->flags);
1111 btusb_stop_traffic(data);
1112 btusb_free_frags(data);
1114 err = usb_autopm_get_interface(data->intf);
1118 data->intf->needs_remote_wakeup = 0;
1119 usb_autopm_put_interface(data->intf);
1122 usb_scuttle_anchored_urbs(&data->deferred);
1126 static int btusb_flush(struct hci_dev *hdev)
1128 struct btusb_data *data = hci_get_drvdata(hdev);
1130 BT_DBG("%s", hdev->name);
1132 usb_kill_anchored_urbs(&data->tx_anchor);
1133 btusb_free_frags(data);
1138 static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb)
1140 struct btusb_data *data = hci_get_drvdata(hdev);
1141 struct usb_ctrlrequest *dr;
1145 urb = usb_alloc_urb(0, GFP_KERNEL);
1147 return ERR_PTR(-ENOMEM);
1149 dr = kmalloc(sizeof(*dr), GFP_KERNEL);
1152 return ERR_PTR(-ENOMEM);
1155 dr->bRequestType = data->cmdreq_type;
1156 dr->bRequest = data->cmdreq;
1159 dr->wLength = __cpu_to_le16(skb->len);
1161 pipe = usb_sndctrlpipe(data->udev, 0x00);
1163 usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
1164 skb->data, skb->len, btusb_tx_complete, skb);
1166 skb->dev = (void *)hdev;
1171 static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb)
1173 struct btusb_data *data = hci_get_drvdata(hdev);
1177 if (!data->bulk_tx_ep)
1178 return ERR_PTR(-ENODEV);
1180 urb = usb_alloc_urb(0, GFP_KERNEL);
1182 return ERR_PTR(-ENOMEM);
1184 pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
1186 usb_fill_bulk_urb(urb, data->udev, pipe,
1187 skb->data, skb->len, btusb_tx_complete, skb);
1189 skb->dev = (void *)hdev;
1194 static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb)
1196 struct btusb_data *data = hci_get_drvdata(hdev);
1200 if (!data->isoc_tx_ep)
1201 return ERR_PTR(-ENODEV);
1203 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
1205 return ERR_PTR(-ENOMEM);
1207 pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress);
1209 usb_fill_int_urb(urb, data->udev, pipe,
1210 skb->data, skb->len, btusb_isoc_tx_complete,
1211 skb, data->isoc_tx_ep->bInterval);
1213 urb->transfer_flags = URB_ISO_ASAP;
1215 __fill_isoc_descriptor(urb, skb->len,
1216 le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
1218 skb->dev = (void *)hdev;
1223 static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb)
1225 struct btusb_data *data = hci_get_drvdata(hdev);
1228 usb_anchor_urb(urb, &data->tx_anchor);
1230 err = usb_submit_urb(urb, GFP_KERNEL);
1232 if (err != -EPERM && err != -ENODEV)
1233 BT_ERR("%s urb %p submission failed (%d)",
1234 hdev->name, urb, -err);
1235 kfree(urb->setup_packet);
1236 usb_unanchor_urb(urb);
1238 usb_mark_last_busy(data->udev);
1245 static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb)
1247 struct btusb_data *data = hci_get_drvdata(hdev);
1248 unsigned long flags;
1251 spin_lock_irqsave(&data->txlock, flags);
1252 suspending = test_bit(BTUSB_SUSPENDING, &data->flags);
1254 data->tx_in_flight++;
1255 spin_unlock_irqrestore(&data->txlock, flags);
1258 return submit_tx_urb(hdev, urb);
1260 usb_anchor_urb(urb, &data->deferred);
1261 schedule_work(&data->waker);
1267 static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
1271 BT_DBG("%s", hdev->name);
1273 switch (hci_skb_pkt_type(skb)) {
1274 case HCI_COMMAND_PKT:
1275 urb = alloc_ctrl_urb(hdev, skb);
1277 return PTR_ERR(urb);
1279 hdev->stat.cmd_tx++;
1280 return submit_or_queue_tx_urb(hdev, urb);
1282 case HCI_ACLDATA_PKT:
1283 urb = alloc_bulk_urb(hdev, skb);
1285 return PTR_ERR(urb);
1287 hdev->stat.acl_tx++;
1288 return submit_or_queue_tx_urb(hdev, urb);
1290 case HCI_SCODATA_PKT:
1291 if (hci_conn_num(hdev, SCO_LINK) < 1)
1294 urb = alloc_isoc_urb(hdev, skb);
1296 return PTR_ERR(urb);
1298 hdev->stat.sco_tx++;
1299 return submit_tx_urb(hdev, urb);
1305 static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
1307 struct btusb_data *data = hci_get_drvdata(hdev);
1309 BT_DBG("%s evt %d", hdev->name, evt);
1311 if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) {
1312 data->sco_num = hci_conn_num(hdev, SCO_LINK);
1313 schedule_work(&data->work);
1317 static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
1319 struct btusb_data *data = hci_get_drvdata(hdev);
1320 struct usb_interface *intf = data->isoc;
1321 struct usb_endpoint_descriptor *ep_desc;
1327 err = usb_set_interface(data->udev, 1, altsetting);
1329 BT_ERR("%s setting interface failed (%d)", hdev->name, -err);
1333 data->isoc_altsetting = altsetting;
1335 data->isoc_tx_ep = NULL;
1336 data->isoc_rx_ep = NULL;
1338 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
1339 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
1341 if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
1342 data->isoc_tx_ep = ep_desc;
1346 if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
1347 data->isoc_rx_ep = ep_desc;
1352 if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
1353 BT_ERR("%s invalid SCO descriptors", hdev->name);
1360 static void btusb_work(struct work_struct *work)
1362 struct btusb_data *data = container_of(work, struct btusb_data, work);
1363 struct hci_dev *hdev = data->hdev;
1367 if (data->sco_num > 0) {
1368 if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
1369 err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
1371 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1372 usb_kill_anchored_urbs(&data->isoc_anchor);
1376 set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
1379 if (hdev->voice_setting & 0x0020) {
1380 static const int alts[3] = { 2, 4, 5 };
1382 new_alts = alts[data->sco_num - 1];
1384 new_alts = data->sco_num;
1387 if (data->isoc_altsetting != new_alts) {
1388 unsigned long flags;
1390 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1391 usb_kill_anchored_urbs(&data->isoc_anchor);
1393 /* When isochronous alternate setting needs to be
1394 * changed, because SCO connection has been added
1395 * or removed, a packet fragment may be left in the
1396 * reassembling state. This could lead to wrongly
1397 * assembled fragments.
1399 * Clear outstanding fragment when selecting a new
1400 * alternate setting.
1402 spin_lock_irqsave(&data->rxlock, flags);
1403 kfree_skb(data->sco_skb);
1404 data->sco_skb = NULL;
1405 spin_unlock_irqrestore(&data->rxlock, flags);
1407 if (__set_isoc_interface(hdev, new_alts) < 0)
1411 if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
1412 if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
1413 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1415 btusb_submit_isoc_urb(hdev, GFP_KERNEL);
1418 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1419 usb_kill_anchored_urbs(&data->isoc_anchor);
1421 __set_isoc_interface(hdev, 0);
1422 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
1423 usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
1427 static void btusb_waker(struct work_struct *work)
1429 struct btusb_data *data = container_of(work, struct btusb_data, waker);
1432 err = usb_autopm_get_interface(data->intf);
1436 usb_autopm_put_interface(data->intf);
1439 static int btusb_setup_bcm92035(struct hci_dev *hdev)
1441 struct sk_buff *skb;
1444 BT_DBG("%s", hdev->name);
1446 skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
1448 BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb));
1455 static int btusb_setup_csr(struct hci_dev *hdev)
1457 struct hci_rp_read_local_version *rp;
1458 struct sk_buff *skb;
1460 BT_DBG("%s", hdev->name);
1462 skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
1465 int err = PTR_ERR(skb);
1466 BT_ERR("%s: CSR: Local version failed (%d)", hdev->name, err);
1470 if (skb->len != sizeof(struct hci_rp_read_local_version)) {
1471 BT_ERR("%s: CSR: Local version length mismatch", hdev->name);
1476 rp = (struct hci_rp_read_local_version *)skb->data;
1478 /* Detect controllers which aren't real CSR ones. */
1479 if (le16_to_cpu(rp->manufacturer) != 10 ||
1480 le16_to_cpu(rp->lmp_subver) == 0x0c5c) {
1481 /* Clear the reset quirk since this is not an actual
1482 * early Bluetooth 1.1 device from CSR.
1484 clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
1486 /* These fake CSR controllers have all a broken
1487 * stored link key handling and so just disable it.
1489 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
1497 static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
1498 struct intel_version *ver)
1500 const struct firmware *fw;
1504 snprintf(fwname, sizeof(fwname),
1505 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1506 ver->hw_platform, ver->hw_variant, ver->hw_revision,
1507 ver->fw_variant, ver->fw_revision, ver->fw_build_num,
1508 ver->fw_build_ww, ver->fw_build_yy);
1510 ret = request_firmware(&fw, fwname, &hdev->dev);
1512 if (ret == -EINVAL) {
1513 BT_ERR("%s Intel firmware file request failed (%d)",
1518 BT_ERR("%s failed to open Intel firmware file: %s(%d)",
1519 hdev->name, fwname, ret);
1521 /* If the correct firmware patch file is not found, use the
1522 * default firmware patch file instead
1524 snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
1525 ver->hw_platform, ver->hw_variant);
1526 if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
1527 BT_ERR("%s failed to open default Intel fw file: %s",
1528 hdev->name, fwname);
1533 BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname);
1538 static int btusb_setup_intel_patching(struct hci_dev *hdev,
1539 const struct firmware *fw,
1540 const u8 **fw_ptr, int *disable_patch)
1542 struct sk_buff *skb;
1543 struct hci_command_hdr *cmd;
1544 const u8 *cmd_param;
1545 struct hci_event_hdr *evt = NULL;
1546 const u8 *evt_param = NULL;
1547 int remain = fw->size - (*fw_ptr - fw->data);
1549 /* The first byte indicates the types of the patch command or event.
1550 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1551 * in the current firmware buffer doesn't start with 0x01 or
1552 * the size of remain buffer is smaller than HCI command header,
1553 * the firmware file is corrupted and it should stop the patching
1556 if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
1557 BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name);
1563 cmd = (struct hci_command_hdr *)(*fw_ptr);
1564 *fw_ptr += sizeof(*cmd);
1565 remain -= sizeof(*cmd);
1567 /* Ensure that the remain firmware data is long enough than the length
1568 * of command parameter. If not, the firmware file is corrupted.
1570 if (remain < cmd->plen) {
1571 BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name);
1575 /* If there is a command that loads a patch in the firmware
1576 * file, then enable the patch upon success, otherwise just
1577 * disable the manufacturer mode, for example patch activation
1578 * is not required when the default firmware patch file is used
1579 * because there are no patch data to load.
1581 if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
1584 cmd_param = *fw_ptr;
1585 *fw_ptr += cmd->plen;
1586 remain -= cmd->plen;
1588 /* This reads the expected events when the above command is sent to the
1589 * device. Some vendor commands expects more than one events, for
1590 * example command status event followed by vendor specific event.
1591 * For this case, it only keeps the last expected event. so the command
1592 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1593 * last expected event.
1595 while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
1599 evt = (struct hci_event_hdr *)(*fw_ptr);
1600 *fw_ptr += sizeof(*evt);
1601 remain -= sizeof(*evt);
1603 if (remain < evt->plen) {
1604 BT_ERR("%s Intel fw corrupted: invalid evt len",
1609 evt_param = *fw_ptr;
1610 *fw_ptr += evt->plen;
1611 remain -= evt->plen;
1614 /* Every HCI commands in the firmware file has its correspond event.
1615 * If event is not found or remain is smaller than zero, the firmware
1616 * file is corrupted.
1618 if (!evt || !evt_param || remain < 0) {
1619 BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name);
1623 skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
1624 cmd_param, evt->evt, HCI_INIT_TIMEOUT);
1626 BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
1627 hdev->name, cmd->opcode, PTR_ERR(skb));
1628 return PTR_ERR(skb);
1631 /* It ensures that the returned event matches the event data read from
1632 * the firmware file. At fist, it checks the length and then
1633 * the contents of the event.
1635 if (skb->len != evt->plen) {
1636 BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name,
1637 le16_to_cpu(cmd->opcode));
1642 if (memcmp(skb->data, evt_param, evt->plen)) {
1643 BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
1644 hdev->name, le16_to_cpu(cmd->opcode));
1653 static int btusb_setup_intel(struct hci_dev *hdev)
1655 struct sk_buff *skb;
1656 const struct firmware *fw;
1658 int disable_patch, err;
1659 struct intel_version ver;
1661 BT_DBG("%s", hdev->name);
1663 /* The controller has a bug with the first HCI command sent to it
1664 * returning number of completed commands as zero. This would stall the
1665 * command processing in the Bluetooth core.
1667 * As a workaround, send HCI Reset command first which will reset the
1668 * number of completed commands and allow normal command processing
1671 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
1673 BT_ERR("%s sending initial HCI reset command failed (%ld)",
1674 hdev->name, PTR_ERR(skb));
1675 return PTR_ERR(skb);
1679 /* Read Intel specific controller version first to allow selection of
1680 * which firmware file to load.
1682 * The returned information are hardware variant and revision plus
1683 * firmware variant, revision and build number.
1685 err = btintel_read_version(hdev, &ver);
1689 BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
1690 hdev->name, ver.hw_platform, ver.hw_variant, ver.hw_revision,
1691 ver.fw_variant, ver.fw_revision, ver.fw_build_num,
1692 ver.fw_build_ww, ver.fw_build_yy, ver.fw_patch_num);
1694 /* fw_patch_num indicates the version of patch the device currently
1695 * have. If there is no patch data in the device, it is always 0x00.
1696 * So, if it is other than 0x00, no need to patch the device again.
1698 if (ver.fw_patch_num) {
1699 BT_INFO("%s: Intel device is already patched. patch num: %02x",
1700 hdev->name, ver.fw_patch_num);
1704 /* Opens the firmware patch file based on the firmware version read
1705 * from the controller. If it fails to open the matching firmware
1706 * patch file, it tries to open the default firmware patch file.
1707 * If no patch file is found, allow the device to operate without
1710 fw = btusb_setup_intel_get_fw(hdev, &ver);
1715 /* Enable the manufacturer mode of the controller.
1716 * Only while this mode is enabled, the driver can download the
1717 * firmware patch data and configuration parameters.
1719 err = btintel_enter_mfg(hdev);
1721 release_firmware(fw);
1727 /* The firmware data file consists of list of Intel specific HCI
1728 * commands and its expected events. The first byte indicates the
1729 * type of the message, either HCI command or HCI event.
1731 * It reads the command and its expected event from the firmware file,
1732 * and send to the controller. Once __hci_cmd_sync_ev() returns,
1733 * the returned event is compared with the event read from the firmware
1734 * file and it will continue until all the messages are downloaded to
1737 * Once the firmware patching is completed successfully,
1738 * the manufacturer mode is disabled with reset and activating the
1741 * If the firmware patching fails, the manufacturer mode is
1742 * disabled with reset and deactivating the patch.
1744 * If the default patch file is used, no reset is done when disabling
1747 while (fw->size > fw_ptr - fw->data) {
1750 ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
1753 goto exit_mfg_deactivate;
1756 release_firmware(fw);
1759 goto exit_mfg_disable;
1761 /* Patching completed successfully and disable the manufacturer mode
1762 * with reset and activate the downloaded firmware patches.
1764 err = btintel_exit_mfg(hdev, true, true);
1768 BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
1774 /* Disable the manufacturer mode without reset */
1775 err = btintel_exit_mfg(hdev, false, false);
1779 BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
1783 exit_mfg_deactivate:
1784 release_firmware(fw);
1786 /* Patching failed. Disable the manufacturer mode with reset and
1787 * deactivate the downloaded firmware patches.
1789 err = btintel_exit_mfg(hdev, true, false);
1793 BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
1797 /* Set the event mask for Intel specific vendor events. This enables
1798 * a few extra events that are useful during general operation.
1800 btintel_set_event_mask_mfg(hdev, false);
1802 btintel_check_bdaddr(hdev);
1806 static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
1808 struct sk_buff *skb;
1809 struct hci_event_hdr *hdr;
1810 struct hci_ev_cmd_complete *evt;
1812 skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
1816 hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr));
1817 hdr->evt = HCI_EV_CMD_COMPLETE;
1818 hdr->plen = sizeof(*evt) + 1;
1820 evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt));
1822 evt->opcode = cpu_to_le16(opcode);
1824 *skb_put(skb, 1) = 0x00;
1826 hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
1828 return hci_recv_frame(hdev, skb);
1831 static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
1834 /* When the device is in bootloader mode, then it can send
1835 * events via the bulk endpoint. These events are treated the
1836 * same way as the ones received from the interrupt endpoint.
1838 if (test_bit(BTUSB_BOOTLOADER, &data->flags))
1839 return btusb_recv_intr(data, buffer, count);
1841 return btusb_recv_bulk(data, buffer, count);
1844 static void btusb_intel_bootup(struct btusb_data *data, const void *ptr,
1847 const struct intel_bootup *evt = ptr;
1849 if (len != sizeof(*evt))
1852 if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
1853 smp_mb__after_atomic();
1854 wake_up_bit(&data->flags, BTUSB_BOOTING);
1858 static void btusb_intel_secure_send_result(struct btusb_data *data,
1859 const void *ptr, unsigned int len)
1861 const struct intel_secure_send_result *evt = ptr;
1863 if (len != sizeof(*evt))
1867 set_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
1869 if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) &&
1870 test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
1871 smp_mb__after_atomic();
1872 wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
1876 static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
1878 struct btusb_data *data = hci_get_drvdata(hdev);
1880 if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
1881 struct hci_event_hdr *hdr = (void *)skb->data;
1883 if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
1885 const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
1886 unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
1888 switch (skb->data[2]) {
1890 /* When switching to the operational firmware
1891 * the device sends a vendor specific event
1892 * indicating that the bootup completed.
1894 btusb_intel_bootup(data, ptr, len);
1897 /* When the firmware loading completes the
1898 * device sends out a vendor specific event
1899 * indicating the result of the firmware
1902 btusb_intel_secure_send_result(data, ptr, len);
1908 return hci_recv_frame(hdev, skb);
1911 static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
1913 struct btusb_data *data = hci_get_drvdata(hdev);
1916 BT_DBG("%s", hdev->name);
1918 switch (hci_skb_pkt_type(skb)) {
1919 case HCI_COMMAND_PKT:
1920 if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
1921 struct hci_command_hdr *cmd = (void *)skb->data;
1922 __u16 opcode = le16_to_cpu(cmd->opcode);
1924 /* When in bootloader mode and the command 0xfc09
1925 * is received, it needs to be send down the
1926 * bulk endpoint. So allocate a bulk URB instead.
1928 if (opcode == 0xfc09)
1929 urb = alloc_bulk_urb(hdev, skb);
1931 urb = alloc_ctrl_urb(hdev, skb);
1933 /* When the 0xfc01 command is issued to boot into
1934 * the operational firmware, it will actually not
1935 * send a command complete event. To keep the flow
1936 * control working inject that event here.
1938 if (opcode == 0xfc01)
1939 inject_cmd_complete(hdev, opcode);
1941 urb = alloc_ctrl_urb(hdev, skb);
1944 return PTR_ERR(urb);
1946 hdev->stat.cmd_tx++;
1947 return submit_or_queue_tx_urb(hdev, urb);
1949 case HCI_ACLDATA_PKT:
1950 urb = alloc_bulk_urb(hdev, skb);
1952 return PTR_ERR(urb);
1954 hdev->stat.acl_tx++;
1955 return submit_or_queue_tx_urb(hdev, urb);
1957 case HCI_SCODATA_PKT:
1958 if (hci_conn_num(hdev, SCO_LINK) < 1)
1961 urb = alloc_isoc_urb(hdev, skb);
1963 return PTR_ERR(urb);
1965 hdev->stat.sco_tx++;
1966 return submit_tx_urb(hdev, urb);
1972 static int btusb_setup_intel_new(struct hci_dev *hdev)
1974 static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
1975 0x00, 0x08, 0x04, 0x00 };
1976 struct btusb_data *data = hci_get_drvdata(hdev);
1977 struct sk_buff *skb;
1978 struct intel_version ver;
1979 struct intel_boot_params *params;
1980 const struct firmware *fw;
1984 ktime_t calltime, delta, rettime;
1985 unsigned long long duration;
1988 BT_DBG("%s", hdev->name);
1990 calltime = ktime_get();
1992 /* Read the Intel version information to determine if the device
1993 * is in bootloader mode or if it already has operational firmware
1996 err = btintel_read_version(hdev, &ver);
2000 /* The hardware platform number has a fixed value of 0x37 and
2001 * for now only accept this single value.
2003 if (ver.hw_platform != 0x37) {
2004 BT_ERR("%s: Unsupported Intel hardware platform (%u)",
2005 hdev->name, ver.hw_platform);
2009 /* At the moment the iBT 3.0 hardware variants 0x0b (LnP/SfP)
2010 * and 0x0c (WsP) are supported by this firmware loading method.
2012 * This check has been put in place to ensure correct forward
2013 * compatibility options when newer hardware variants come along.
2015 if (ver.hw_variant != 0x0b && ver.hw_variant != 0x0c) {
2016 BT_ERR("%s: Unsupported Intel hardware variant (%u)",
2017 hdev->name, ver.hw_variant);
2021 btintel_version_info(hdev, &ver);
2023 /* The firmware variant determines if the device is in bootloader
2024 * mode or is running operational firmware. The value 0x06 identifies
2025 * the bootloader and the value 0x23 identifies the operational
2028 * When the operational firmware is already present, then only
2029 * the check for valid Bluetooth device address is needed. This
2030 * determines if the device will be added as configured or
2031 * unconfigured controller.
2033 * It is not possible to use the Secure Boot Parameters in this
2034 * case since that command is only available in bootloader mode.
2036 if (ver.fw_variant == 0x23) {
2037 clear_bit(BTUSB_BOOTLOADER, &data->flags);
2038 btintel_check_bdaddr(hdev);
2042 /* If the device is not in bootloader mode, then the only possible
2043 * choice is to return an error and abort the device initialization.
2045 if (ver.fw_variant != 0x06) {
2046 BT_ERR("%s: Unsupported Intel firmware variant (%u)",
2047 hdev->name, ver.fw_variant);
2051 /* Read the secure boot parameters to identify the operating
2052 * details of the bootloader.
2054 skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
2056 BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
2057 hdev->name, PTR_ERR(skb));
2058 return PTR_ERR(skb);
2061 if (skb->len != sizeof(*params)) {
2062 BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
2067 params = (struct intel_boot_params *)skb->data;
2069 BT_INFO("%s: Device revision is %u", hdev->name,
2070 le16_to_cpu(params->dev_revid));
2072 BT_INFO("%s: Secure boot is %s", hdev->name,
2073 params->secure_boot ? "enabled" : "disabled");
2075 BT_INFO("%s: OTP lock is %s", hdev->name,
2076 params->otp_lock ? "enabled" : "disabled");
2078 BT_INFO("%s: API lock is %s", hdev->name,
2079 params->api_lock ? "enabled" : "disabled");
2081 BT_INFO("%s: Debug lock is %s", hdev->name,
2082 params->debug_lock ? "enabled" : "disabled");
2084 BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name,
2085 params->min_fw_build_nn, params->min_fw_build_cw,
2086 2000 + params->min_fw_build_yy);
2088 /* It is required that every single firmware fragment is acknowledged
2089 * with a command complete event. If the boot parameters indicate
2090 * that this bootloader does not send them, then abort the setup.
2092 if (params->limited_cce != 0x00) {
2093 BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
2094 hdev->name, params->limited_cce);
2099 /* If the OTP has no valid Bluetooth device address, then there will
2100 * also be no valid address for the operational firmware.
2102 if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) {
2103 BT_INFO("%s: No device address configured", hdev->name);
2104 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
2107 /* With this Intel bootloader only the hardware variant and device
2108 * revision information are used to select the right firmware.
2110 * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
2112 * Currently the supported hardware variants are:
2113 * 11 (0x0b) for iBT3.0 (LnP/SfP)
2114 * 12 (0x0c) for iBT3.5 (WsP)
2116 snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
2117 le16_to_cpu(ver.hw_variant),
2118 le16_to_cpu(params->dev_revid));
2120 err = request_firmware(&fw, fwname, &hdev->dev);
2122 BT_ERR("%s: Failed to load Intel firmware file (%d)",
2128 BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
2130 /* Save the DDC file name for later use to apply once the firmware
2131 * downloading is done.
2133 snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
2134 le16_to_cpu(ver.hw_variant),
2135 le16_to_cpu(params->dev_revid));
2139 if (fw->size < 644) {
2140 BT_ERR("%s: Invalid size of firmware file (%zu)",
2141 hdev->name, fw->size);
2146 set_bit(BTUSB_DOWNLOADING, &data->flags);
2148 /* Start the firmware download transaction with the Init fragment
2149 * represented by the 128 bytes of CSS header.
2151 err = btintel_secure_send(hdev, 0x00, 128, fw->data);
2153 BT_ERR("%s: Failed to send firmware header (%d)",
2158 /* Send the 256 bytes of public key information from the firmware
2159 * as the PKey fragment.
2161 err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
2163 BT_ERR("%s: Failed to send firmware public key (%d)",
2168 /* Send the 256 bytes of signature information from the firmware
2169 * as the Sign fragment.
2171 err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
2173 BT_ERR("%s: Failed to send firmware signature (%d)",
2178 fw_ptr = fw->data + 644;
2181 while (fw_ptr - fw->data < fw->size) {
2182 struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
2184 frag_len += sizeof(*cmd) + cmd->plen;
2186 /* The parameter length of the secure send command requires
2187 * a 4 byte alignment. It happens so that the firmware file
2188 * contains proper Intel_NOP commands to align the fragments
2191 * Send set of commands with 4 byte alignment from the
2192 * firmware data buffer as a single Data fragement.
2194 if (!(frag_len % 4)) {
2195 err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
2197 BT_ERR("%s: Failed to send firmware data (%d)",
2207 set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
2209 BT_INFO("%s: Waiting for firmware download to complete", hdev->name);
2211 /* Before switching the device into operational mode and with that
2212 * booting the loaded firmware, wait for the bootloader notification
2213 * that all fragments have been successfully received.
2215 * When the event processing receives the notification, then the
2216 * BTUSB_DOWNLOADING flag will be cleared.
2218 * The firmware loading should not take longer than 5 seconds
2219 * and thus just timeout if that happens and fail the setup
2222 err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
2224 msecs_to_jiffies(5000));
2225 if (err == -EINTR) {
2226 BT_ERR("%s: Firmware loading interrupted", hdev->name);
2231 BT_ERR("%s: Firmware loading timeout", hdev->name);
2236 if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
2237 BT_ERR("%s: Firmware loading failed", hdev->name);
2242 rettime = ktime_get();
2243 delta = ktime_sub(rettime, calltime);
2244 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
2246 BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration);
2249 release_firmware(fw);
2254 calltime = ktime_get();
2256 set_bit(BTUSB_BOOTING, &data->flags);
2258 skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
2261 return PTR_ERR(skb);
2265 /* The bootloader will not indicate when the device is ready. This
2266 * is done by the operational firmware sending bootup notification.
2268 * Booting into operational firmware should not take longer than
2269 * 1 second. However if that happens, then just fail the setup
2270 * since something went wrong.
2272 BT_INFO("%s: Waiting for device to boot", hdev->name);
2274 err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
2276 msecs_to_jiffies(1000));
2278 if (err == -EINTR) {
2279 BT_ERR("%s: Device boot interrupted", hdev->name);
2284 BT_ERR("%s: Device boot timeout", hdev->name);
2288 rettime = ktime_get();
2289 delta = ktime_sub(rettime, calltime);
2290 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
2292 BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);
2294 clear_bit(BTUSB_BOOTLOADER, &data->flags);
2296 /* Once the device is running in operational mode, it needs to apply
2297 * the device configuration (DDC) parameters.
2299 * The device can work without DDC parameters, so even if it fails
2300 * to load the file, no need to fail the setup.
2302 btintel_load_ddc_config(hdev, fwname);
2304 /* Set the event mask for Intel specific vendor events. This enables
2305 * a few extra events that are useful during general operation. It
2306 * does not enable any debugging related events.
2308 * The device will function correctly without these events enabled
2309 * and thus no need to fail the setup.
2311 btintel_set_event_mask(hdev, false);
2316 static int btusb_shutdown_intel(struct hci_dev *hdev)
2318 struct sk_buff *skb;
2321 /* Some platforms have an issue with BT LED when the interface is
2322 * down or BT radio is turned off, which takes 5 seconds to BT LED
2323 * goes off. This command turns off the BT LED immediately.
2325 skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
2328 BT_ERR("%s: turning off Intel device LED failed (%ld)",
2337 static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
2338 const bdaddr_t *bdaddr)
2340 struct sk_buff *skb;
2345 buf[1] = sizeof(bdaddr_t);
2346 memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));
2348 skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT);
2351 BT_ERR("%s: changing Marvell device address failed (%ld)",
2360 static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
2361 const bdaddr_t *bdaddr)
2363 struct sk_buff *skb;
2370 buf[3] = sizeof(bdaddr_t);
2371 memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
2373 skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
2376 BT_ERR("%s: Change address command failed (%ld)",
2385 #define QCA_DFU_PACKET_LEN 4096
2387 #define QCA_GET_TARGET_VERSION 0x09
2388 #define QCA_CHECK_STATUS 0x05
2389 #define QCA_DFU_DOWNLOAD 0x01
2391 #define QCA_SYSCFG_UPDATED 0x40
2392 #define QCA_PATCH_UPDATED 0x80
2393 #define QCA_DFU_TIMEOUT 3000
2395 struct qca_version {
2397 __le32 patch_version;
2403 struct qca_rampatch_version {
2405 __le16 patch_version;
2408 struct qca_device_info {
2410 u8 rampatch_hdr; /* length of header in rampatch */
2411 u8 nvm_hdr; /* length of header in NVM */
2412 u8 ver_offset; /* offset of version structure in rampatch */
2415 static const struct qca_device_info qca_devices_table[] = {
2416 { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
2417 { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
2418 { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
2419 { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
2420 { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
2421 { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
2424 static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request,
2425 void *data, u16 size)
2427 struct btusb_data *btdata = hci_get_drvdata(hdev);
2428 struct usb_device *udev = btdata->udev;
2432 buf = kmalloc(size, GFP_KERNEL);
2436 /* Found some of USB hosts have IOT issues with ours so that we should
2437 * not wait until HCI layer is ready.
2439 pipe = usb_rcvctrlpipe(udev, 0);
2440 err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
2441 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
2443 BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err);
2447 memcpy(data, buf, size);
2455 static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
2456 const struct firmware *firmware,
2459 struct btusb_data *btdata = hci_get_drvdata(hdev);
2460 struct usb_device *udev = btdata->udev;
2461 size_t count, size, sent = 0;
2465 buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
2469 count = firmware->size;
2471 size = min_t(size_t, count, hdr_size);
2472 memcpy(buf, firmware->data, size);
2474 /* USB patches should go down to controller through USB path
2475 * because binary format fits to go down through USB channel.
2476 * USB control path is for patching headers and USB bulk is for
2479 pipe = usb_sndctrlpipe(udev, 0);
2480 err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
2481 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
2483 BT_ERR("%s: Failed to send headers (%d)", hdev->name, err);
2491 size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
2493 memcpy(buf, firmware->data + sent, size);
2495 pipe = usb_sndbulkpipe(udev, 0x02);
2496 err = usb_bulk_msg(udev, pipe, buf, size, &len,
2499 BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
2500 hdev->name, sent, firmware->size, err);
2505 BT_ERR("%s: Failed to get bulk buffer", hdev->name);
2519 static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
2520 struct qca_version *ver,
2521 const struct qca_device_info *info)
2523 struct qca_rampatch_version *rver;
2524 const struct firmware *fw;
2525 u32 ver_rom, ver_patch;
2526 u16 rver_rom, rver_patch;
2530 ver_rom = le32_to_cpu(ver->rom_version);
2531 ver_patch = le32_to_cpu(ver->patch_version);
2533 snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom);
2535 err = request_firmware(&fw, fwname, &hdev->dev);
2537 BT_ERR("%s: failed to request rampatch file: %s (%d)",
2538 hdev->name, fwname, err);
2542 BT_INFO("%s: using rampatch file: %s", hdev->name, fwname);
2544 rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
2545 rver_rom = le16_to_cpu(rver->rom_version);
2546 rver_patch = le16_to_cpu(rver->patch_version);
2548 BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
2549 "build 0x%x", hdev->name, rver_rom, rver_patch, ver_rom,
2552 if (rver_rom != ver_rom || rver_patch <= ver_patch) {
2553 BT_ERR("%s: rampatch file version did not match with firmware",
2559 err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);
2562 release_firmware(fw);
2567 static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
2568 struct qca_version *ver,
2569 const struct qca_device_info *info)
2571 const struct firmware *fw;
2575 snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
2576 le32_to_cpu(ver->rom_version));
2578 err = request_firmware(&fw, fwname, &hdev->dev);
2580 BT_ERR("%s: failed to request NVM file: %s (%d)",
2581 hdev->name, fwname, err);
2585 BT_INFO("%s: using NVM file: %s", hdev->name, fwname);
2587 err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
2589 release_firmware(fw);
2594 static int btusb_setup_qca(struct hci_dev *hdev)
2596 const struct qca_device_info *info = NULL;
2597 struct qca_version ver;
2602 err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver,
2607 ver_rom = le32_to_cpu(ver.rom_version);
2608 for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
2609 if (ver_rom == qca_devices_table[i].rom_version)
2610 info = &qca_devices_table[i];
2613 BT_ERR("%s: don't support firmware rome 0x%x", hdev->name,
2618 err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status,
2623 if (!(status & QCA_PATCH_UPDATED)) {
2624 err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
2629 if (!(status & QCA_SYSCFG_UPDATED)) {
2630 err = btusb_setup_qca_load_nvm(hdev, &ver, info);
2638 #ifdef CONFIG_BT_HCIBTUSB_BCM
2639 static inline int __set_diag_interface(struct hci_dev *hdev)
2641 struct btusb_data *data = hci_get_drvdata(hdev);
2642 struct usb_interface *intf = data->diag;
2648 data->diag_tx_ep = NULL;
2649 data->diag_rx_ep = NULL;
2651 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
2652 struct usb_endpoint_descriptor *ep_desc;
2654 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
2656 if (!data->diag_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
2657 data->diag_tx_ep = ep_desc;
2661 if (!data->diag_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
2662 data->diag_rx_ep = ep_desc;
2667 if (!data->diag_tx_ep || !data->diag_rx_ep) {
2668 BT_ERR("%s invalid diagnostic descriptors", hdev->name);
2675 static struct urb *alloc_diag_urb(struct hci_dev *hdev, bool enable)
2677 struct btusb_data *data = hci_get_drvdata(hdev);
2678 struct sk_buff *skb;
2682 if (!data->diag_tx_ep)
2683 return ERR_PTR(-ENODEV);
2685 urb = usb_alloc_urb(0, GFP_KERNEL);
2687 return ERR_PTR(-ENOMEM);
2689 skb = bt_skb_alloc(2, GFP_KERNEL);
2692 return ERR_PTR(-ENOMEM);
2695 *skb_put(skb, 1) = 0xf0;
2696 *skb_put(skb, 1) = enable;
2698 pipe = usb_sndbulkpipe(data->udev, data->diag_tx_ep->bEndpointAddress);
2700 usb_fill_bulk_urb(urb, data->udev, pipe,
2701 skb->data, skb->len, btusb_tx_complete, skb);
2703 skb->dev = (void *)hdev;
2708 static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable)
2710 struct btusb_data *data = hci_get_drvdata(hdev);
2716 if (!test_bit(HCI_RUNNING, &hdev->flags))
2719 urb = alloc_diag_urb(hdev, enable);
2721 return PTR_ERR(urb);
2723 return submit_or_queue_tx_urb(hdev, urb);
2727 static int btusb_probe(struct usb_interface *intf,
2728 const struct usb_device_id *id)
2730 struct usb_endpoint_descriptor *ep_desc;
2731 struct btusb_data *data;
2732 struct hci_dev *hdev;
2733 unsigned ifnum_base;
2736 BT_DBG("intf %p id %p", intf, id);
2738 /* interface numbers are hardcoded in the spec */
2739 if (intf->cur_altsetting->desc.bInterfaceNumber != 0) {
2740 if (!(id->driver_info & BTUSB_IFNUM_2))
2742 if (intf->cur_altsetting->desc.bInterfaceNumber != 2)
2746 ifnum_base = intf->cur_altsetting->desc.bInterfaceNumber;
2748 if (!id->driver_info) {
2749 const struct usb_device_id *match;
2751 match = usb_match_id(intf, blacklist_table);
2756 if (id->driver_info == BTUSB_IGNORE)
2759 if (id->driver_info & BTUSB_ATH3012) {
2760 struct usb_device *udev = interface_to_usbdev(intf);
2762 /* Old firmware would otherwise let ath3k driver load
2763 * patch and sysconfig files */
2764 if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
2768 data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
2772 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
2773 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
2775 if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) {
2776 data->intr_ep = ep_desc;
2780 if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
2781 data->bulk_tx_ep = ep_desc;
2785 if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
2786 data->bulk_rx_ep = ep_desc;
2791 if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep)
2794 if (id->driver_info & BTUSB_AMP) {
2795 data->cmdreq_type = USB_TYPE_CLASS | 0x01;
2796 data->cmdreq = 0x2b;
2798 data->cmdreq_type = USB_TYPE_CLASS;
2799 data->cmdreq = 0x00;
2802 data->udev = interface_to_usbdev(intf);
2805 INIT_WORK(&data->work, btusb_work);
2806 INIT_WORK(&data->waker, btusb_waker);
2807 init_usb_anchor(&data->deferred);
2808 init_usb_anchor(&data->tx_anchor);
2809 spin_lock_init(&data->txlock);
2811 init_usb_anchor(&data->intr_anchor);
2812 init_usb_anchor(&data->bulk_anchor);
2813 init_usb_anchor(&data->isoc_anchor);
2814 init_usb_anchor(&data->diag_anchor);
2815 spin_lock_init(&data->rxlock);
2817 if (id->driver_info & BTUSB_INTEL_NEW) {
2818 data->recv_event = btusb_recv_event_intel;
2819 data->recv_bulk = btusb_recv_bulk_intel;
2820 set_bit(BTUSB_BOOTLOADER, &data->flags);
2822 data->recv_event = hci_recv_frame;
2823 data->recv_bulk = btusb_recv_bulk;
2826 hdev = hci_alloc_dev();
2830 hdev->bus = HCI_USB;
2831 hci_set_drvdata(hdev, data);
2833 if (id->driver_info & BTUSB_AMP)
2834 hdev->dev_type = HCI_AMP;
2836 hdev->dev_type = HCI_PRIMARY;
2840 SET_HCIDEV_DEV(hdev, &intf->dev);
2842 hdev->open = btusb_open;
2843 hdev->close = btusb_close;
2844 hdev->flush = btusb_flush;
2845 hdev->send = btusb_send_frame;
2846 hdev->notify = btusb_notify;
2848 if (id->driver_info & BTUSB_BCM2045)
2849 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
2851 if (id->driver_info & BTUSB_BCM92035)
2852 hdev->setup = btusb_setup_bcm92035;
2854 #ifdef CONFIG_BT_HCIBTUSB_BCM
2855 if (id->driver_info & BTUSB_BCM_PATCHRAM) {
2856 hdev->manufacturer = 15;
2857 hdev->setup = btbcm_setup_patchram;
2858 hdev->set_diag = btusb_bcm_set_diag;
2859 hdev->set_bdaddr = btbcm_set_bdaddr;
2861 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2862 data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
2865 if (id->driver_info & BTUSB_BCM_APPLE) {
2866 hdev->manufacturer = 15;
2867 hdev->setup = btbcm_setup_apple;
2868 hdev->set_diag = btusb_bcm_set_diag;
2870 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2871 data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
2875 if (id->driver_info & BTUSB_INTEL) {
2876 hdev->manufacturer = 2;
2877 hdev->setup = btusb_setup_intel;
2878 hdev->shutdown = btusb_shutdown_intel;
2879 hdev->set_diag = btintel_set_diag_mfg;
2880 hdev->set_bdaddr = btintel_set_bdaddr;
2881 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
2882 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
2883 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
2886 if (id->driver_info & BTUSB_INTEL_NEW) {
2887 hdev->manufacturer = 2;
2888 hdev->send = btusb_send_frame_intel;
2889 hdev->setup = btusb_setup_intel_new;
2890 hdev->hw_error = btintel_hw_error;
2891 hdev->set_diag = btintel_set_diag;
2892 hdev->set_bdaddr = btintel_set_bdaddr;
2893 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
2894 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
2897 if (id->driver_info & BTUSB_MARVELL)
2898 hdev->set_bdaddr = btusb_set_bdaddr_marvell;
2900 if (id->driver_info & BTUSB_SWAVE) {
2901 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
2902 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
2905 if (id->driver_info & BTUSB_INTEL_BOOT) {
2906 hdev->manufacturer = 2;
2907 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
2910 if (id->driver_info & BTUSB_ATH3012) {
2911 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
2912 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
2913 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
2916 if (id->driver_info & BTUSB_QCA_ROME) {
2917 data->setup_on_usb = btusb_setup_qca;
2918 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
2921 #ifdef CONFIG_BT_HCIBTUSB_RTL
2922 if (id->driver_info & BTUSB_REALTEK) {
2923 hdev->setup = btrtl_setup_realtek;
2925 /* Realtek devices lose their updated firmware over suspend,
2926 * but the USB hub doesn't notice any status change.
2927 * Explicitly request a device reset on resume.
2929 set_bit(BTUSB_RESET_RESUME, &data->flags);
2933 if (id->driver_info & BTUSB_AMP) {
2934 /* AMP controllers do not support SCO packets */
2937 /* Interface orders are hardcoded in the specification */
2938 data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
2942 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
2944 if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
2945 if (!disable_scofix)
2946 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
2949 if (id->driver_info & BTUSB_BROKEN_ISOC)
2952 if (id->driver_info & BTUSB_DIGIANSWER) {
2953 data->cmdreq_type = USB_TYPE_VENDOR;
2954 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
2957 if (id->driver_info & BTUSB_CSR) {
2958 struct usb_device *udev = data->udev;
2959 u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
2961 /* Old firmware would otherwise execute USB reset */
2962 if (bcdDevice < 0x117)
2963 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
2965 /* Fake CSR devices with broken commands */
2966 if (bcdDevice <= 0x100 || bcdDevice == 0x134)
2967 hdev->setup = btusb_setup_csr;
2969 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
2972 if (id->driver_info & BTUSB_SNIFFER) {
2973 struct usb_device *udev = data->udev;
2975 /* New sniffer firmware has crippled HCI interface */
2976 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
2977 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
2980 if (id->driver_info & BTUSB_INTEL_BOOT) {
2981 /* A bug in the bootloader causes that interrupt interface is
2982 * only enabled after receiving SetInterface(0, AltSetting=0).
2984 err = usb_set_interface(data->udev, 0, 0);
2986 BT_ERR("failed to set interface 0, alt 0 %d", err);
2993 err = usb_driver_claim_interface(&btusb_driver,
3001 #ifdef CONFIG_BT_HCIBTUSB_BCM
3003 if (!usb_driver_claim_interface(&btusb_driver,
3005 __set_diag_interface(hdev);
3011 err = hci_register_dev(hdev);
3017 usb_set_intfdata(intf, data);
3022 static void btusb_disconnect(struct usb_interface *intf)
3024 struct btusb_data *data = usb_get_intfdata(intf);
3025 struct hci_dev *hdev;
3027 BT_DBG("intf %p", intf);
3033 usb_set_intfdata(data->intf, NULL);
3036 usb_set_intfdata(data->isoc, NULL);
3039 usb_set_intfdata(data->diag, NULL);
3041 hci_unregister_dev(hdev);
3043 if (intf == data->intf) {
3045 usb_driver_release_interface(&btusb_driver, data->isoc);
3047 usb_driver_release_interface(&btusb_driver, data->diag);
3048 } else if (intf == data->isoc) {
3050 usb_driver_release_interface(&btusb_driver, data->diag);
3051 usb_driver_release_interface(&btusb_driver, data->intf);
3052 } else if (intf == data->diag) {
3053 usb_driver_release_interface(&btusb_driver, data->intf);
3055 usb_driver_release_interface(&btusb_driver, data->isoc);
3062 static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
3064 struct btusb_data *data = usb_get_intfdata(intf);
3066 BT_DBG("intf %p", intf);
3068 if (data->suspend_count++)
3071 spin_lock_irq(&data->txlock);
3072 if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) {
3073 set_bit(BTUSB_SUSPENDING, &data->flags);
3074 spin_unlock_irq(&data->txlock);
3076 spin_unlock_irq(&data->txlock);
3077 data->suspend_count--;
3081 cancel_work_sync(&data->work);
3083 btusb_stop_traffic(data);
3084 usb_kill_anchored_urbs(&data->tx_anchor);
3086 /* Optionally request a device reset on resume, but only when
3087 * wakeups are disabled. If wakeups are enabled we assume the
3088 * device will stay powered up throughout suspend.
3090 if (test_bit(BTUSB_RESET_RESUME, &data->flags) &&
3091 !device_may_wakeup(&data->udev->dev))
3092 data->udev->reset_resume = 1;
3097 static void play_deferred(struct btusb_data *data)
3102 while ((urb = usb_get_from_anchor(&data->deferred))) {
3103 err = usb_submit_urb(urb, GFP_ATOMIC);
3107 data->tx_in_flight++;
3109 usb_scuttle_anchored_urbs(&data->deferred);
3112 static int btusb_resume(struct usb_interface *intf)
3114 struct btusb_data *data = usb_get_intfdata(intf);
3115 struct hci_dev *hdev = data->hdev;
3118 BT_DBG("intf %p", intf);
3120 if (--data->suspend_count)
3123 if (!test_bit(HCI_RUNNING, &hdev->flags))
3126 if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
3127 err = btusb_submit_intr_urb(hdev, GFP_NOIO);
3129 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
3134 if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
3135 err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
3137 clear_bit(BTUSB_BULK_RUNNING, &data->flags);
3141 btusb_submit_bulk_urb(hdev, GFP_NOIO);
3144 if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
3145 if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0)
3146 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
3148 btusb_submit_isoc_urb(hdev, GFP_NOIO);
3151 spin_lock_irq(&data->txlock);
3152 play_deferred(data);
3153 clear_bit(BTUSB_SUSPENDING, &data->flags);
3154 spin_unlock_irq(&data->txlock);
3155 schedule_work(&data->work);
3160 usb_scuttle_anchored_urbs(&data->deferred);
3162 spin_lock_irq(&data->txlock);
3163 clear_bit(BTUSB_SUSPENDING, &data->flags);
3164 spin_unlock_irq(&data->txlock);
3170 static struct usb_driver btusb_driver = {
3172 .probe = btusb_probe,
3173 .disconnect = btusb_disconnect,
3175 .suspend = btusb_suspend,
3176 .resume = btusb_resume,
3178 .id_table = btusb_table,
3179 .supports_autosuspend = 1,
3180 .disable_hub_initiated_lpm = 1,
3183 module_usb_driver(btusb_driver);
3185 module_param(disable_scofix, bool, 0644);
3186 MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
3188 module_param(force_scofix, bool, 0644);
3189 MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
3191 module_param(reset, bool, 0644);
3192 MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
3194 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3195 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
3196 MODULE_VERSION(VERSION);
3197 MODULE_LICENSE("GPL");