drivers/crypto/ux500/cryp/cryp_core.c

   1 /**
   2  * Copyright (C) ST-Ericsson SA 2010
   3  * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
   4  * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson.
   5  * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
   6  * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
   7  * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
   8  * Author: Andreas Westin <andreas.westin@stericsson.com> for ST-Ericsson.
   9  * License terms: GNU General Public License (GPL) version 2
  10  */
  11
  12 #include <linux/clk.h>
  13 #include <linux/completion.h>
  14 #include <linux/crypto.h>
  15 #include <linux/dmaengine.h>
  16 #include <linux/err.h>
  17 #include <linux/errno.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/io.h>
  20 #include <linux/irqreturn.h>
  21 #include <linux/klist.h>
  22 #include <linux/module.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/regulator/consumer.h>
  25 #include <linux/semaphore.h>
  26 #include <linux/platform_data/dma-ste-dma40.h>
  27
  28 #include <crypto/aes.h>
  29 #include <crypto/algapi.h>
  30 #include <crypto/ctr.h>
  31 #include <crypto/des.h>
  32 #include <crypto/scatterwalk.h>
  33
  34 #include <linux/platform_data/crypto-ux500.h>
  35
  36 #include "cryp_p.h"
  37 #include "cryp.h"
  38
  39 #define CRYP_MAX_KEY_SIZE       32
  40 #define BYTES_PER_WORD          4
  41
  42 static int cryp_mode;
  43 static atomic_t session_id;
  44
  45 static struct stedma40_chan_cfg *mem_to_engine;
  46 static struct stedma40_chan_cfg *engine_to_mem;
  47
  48 /**
  49  * struct cryp_driver_data - data specific to the driver.
  50  *
  51  * @device_list: A list of registered devices to choose from.
  52  * @device_allocation: A semaphore initialized with number of devices.
  53  */
  54 struct cryp_driver_data {
  55         struct klist device_list;
  56         struct semaphore device_allocation;
  57 };
  58
  59 /**
  60  * struct cryp_ctx - Crypto context
  61  * @config: Crypto mode.
  62  * @key[CRYP_MAX_KEY_SIZE]: Key.
  63  * @keylen: Length of key.
  64  * @iv: Pointer to initialization vector.
  65  * @indata: Pointer to indata.
  66  * @outdata: Pointer to outdata.
  67  * @datalen: Length of indata.
  68  * @outlen: Length of outdata.
  69  * @blocksize: Size of blocks.
  70  * @updated: Updated flag.
  71  * @dev_ctx: Device dependent context.
  72  * @device: Pointer to the device.
  73  */
  74 struct cryp_ctx {
  75         struct cryp_config config;
  76         u8 key[CRYP_MAX_KEY_SIZE];
  77         u32 keylen;
  78         u8 *iv;
  79         const u8 *indata;
  80         u8 *outdata;
  81         u32 datalen;
  82         u32 outlen;
  83         u32 blocksize;
  84         u8 updated;
  85         struct cryp_device_context dev_ctx;
  86         struct cryp_device_data *device;
  87         u32 session_id;
  88 };
  89
  90 static struct cryp_driver_data driver_data;
  91
  92 /**
  93  * uint8p_to_uint32_be - 4*uint8 to uint32 big endian
  94  * @in: Data to convert.
  95  */
  96 static inline u32 uint8p_to_uint32_be(u8 *in)
  97 {
  98         u32 *data = (u32 *)in;
  99
 100         return cpu_to_be32p(data);
 101 }
 102
 103 /**
 104  * swap_bits_in_byte - mirror the bits in a byte
 105  * @b: the byte to be mirrored
 106  *
 107  * The bits are swapped the following way:
 108  *  Byte b include bits 0-7, nibble 1 (n1) include bits 0-3 and
 109  *  nibble 2 (n2) bits 4-7.
 110  *
 111  *  Nibble 1 (n1):
 112  *  (The "old" (moved) bit is replaced with a zero)
 113  *  1. Move bit 6 and 7, 4 positions to the left.
 114  *  2. Move bit 3 and 5, 2 positions to the left.
 115  *  3. Move bit 1-4, 1 position to the left.
 116  *
 117  *  Nibble 2 (n2):
 118  *  1. Move bit 0 and 1, 4 positions to the right.
 119  *  2. Move bit 2 and 4, 2 positions to the right.
 120  *  3. Move bit 3-6, 1 position to the right.
 121  *
 122  *  Combine the two nibbles to a complete and swapped byte.
 123  */
 124
 125 static inline u8 swap_bits_in_byte(u8 b)
 126 {
 127 #define R_SHIFT_4_MASK  0xc0 /* Bits 6 and 7, right shift 4 */
 128 #define R_SHIFT_2_MASK  0x28 /* (After right shift 4) Bits 3 and 5,
 129                                   right shift 2 */
 130 #define R_SHIFT_1_MASK  0x1e /* (After right shift 2) Bits 1-4,
 131                                   right shift 1 */
 132 #define L_SHIFT_4_MASK  0x03 /* Bits 0 and 1, left shift 4 */
 133 #define L_SHIFT_2_MASK  0x14 /* (After left shift 4) Bits 2 and 4,
 134                                   left shift 2 */
 135 #define L_SHIFT_1_MASK  0x78 /* (After left shift 1) Bits 3-6,
 136                                   left shift 1 */
 137
 138         u8 n1;
 139         u8 n2;
 140
 141         /* Swap most significant nibble */
 142         /* Right shift 4, bits 6 and 7 */
 143         n1 = ((b  & R_SHIFT_4_MASK) >> 4) | (b  & ~(R_SHIFT_4_MASK >> 4));
 144         /* Right shift 2, bits 3 and 5 */
 145         n1 = ((n1 & R_SHIFT_2_MASK) >> 2) | (n1 & ~(R_SHIFT_2_MASK >> 2));
 146         /* Right shift 1, bits 1-4 */
 147         n1 = (n1  & R_SHIFT_1_MASK) >> 1;
 148
 149         /* Swap least significant nibble */
 150         /* Left shift 4, bits 0 and 1 */
 151         n2 = ((b  & L_SHIFT_4_MASK) << 4) | (b  & ~(L_SHIFT_4_MASK << 4));
 152         /* Left shift 2, bits 2 and 4 */
 153         n2 = ((n2 & L_SHIFT_2_MASK) << 2) | (n2 & ~(L_SHIFT_2_MASK << 2));
 154         /* Left shift 1, bits 3-6 */
 155         n2 = (n2  & L_SHIFT_1_MASK) << 1;
 156
 157         return n1 | n2;
 158 }
 159
 160 static inline void swap_words_in_key_and_bits_in_byte(const u8 *in,
 161                                                       u8 *out, u32 len)
 162 {
 163         unsigned int i = 0;
 164         int j;
 165         int index = 0;
 166
 167         j = len - BYTES_PER_WORD;
 168         while (j >= 0) {
 169                 for (i = 0; i < BYTES_PER_WORD; i++) {
 170                         index = len - j - BYTES_PER_WORD + i;
 171                         out[j + i] =
 172                                 swap_bits_in_byte(in[index]);
 173                 }
 174                 j -= BYTES_PER_WORD;
 175         }
 176 }
 177
 178 static void add_session_id(struct cryp_ctx *ctx)
 179 {
 180         /*
 181          * We never want 0 to be a valid value, since this is the default value
 182          * for the software context.
 183          */
 184         if (unlikely(atomic_inc_and_test(&session_id)))
 185                 atomic_inc(&session_id);
 186
 187         ctx->session_id = atomic_read(&session_id);
 188 }
 189
 190 static irqreturn_t cryp_interrupt_handler(int irq, void *param)
 191 {
 192         struct cryp_ctx *ctx;
 193         int i;
 194         struct cryp_device_data *device_data;
 195
 196         if (param == NULL) {
 197                 BUG_ON(!param);
 198                 return IRQ_HANDLED;
 199         }
 200
 201         /* The device is coming from the one found in hw_crypt_noxts. */
 202         device_data = (struct cryp_device_data *)param;
 203
 204         ctx = device_data->current_ctx;
 205
 206         if (ctx == NULL) {
 207                 BUG_ON(!ctx);
 208                 return IRQ_HANDLED;
 209         }
 210
 211         dev_dbg(ctx->device->dev, "[%s] (len: %d) %s, ", __func__, ctx->outlen,
 212                 cryp_pending_irq_src(device_data, CRYP_IRQ_SRC_OUTPUT_FIFO) ?
 213                 "out" : "in");
 214
 215         if (cryp_pending_irq_src(device_data,
 216                                  CRYP_IRQ_SRC_OUTPUT_FIFO)) {
 217                 if (ctx->outlen / ctx->blocksize > 0) {
 218                         for (i = 0; i < ctx->blocksize / 4; i++) {
 219                                 *(ctx->outdata) = readl_relaxed(
 220                                                 &device_data->base->dout);
 221                                 ctx->outdata += 4;
 222                                 ctx->outlen -= 4;
 223                         }
 224
 225                         if (ctx->outlen == 0) {
 226                                 cryp_disable_irq_src(device_data,
 227                                                      CRYP_IRQ_SRC_OUTPUT_FIFO);
 228                         }
 229                 }
 230         } else if (cryp_pending_irq_src(device_data,
 231                                         CRYP_IRQ_SRC_INPUT_FIFO)) {
 232                 if (ctx->datalen / ctx->blocksize > 0) {
 233                         for (i = 0 ; i < ctx->blocksize / 4; i++) {
 234                                 writel_relaxed(ctx->indata,
 235                                                 &device_data->base->din);
 236                                 ctx->indata += 4;
 237                                 ctx->datalen -= 4;
 238                         }
 239
 240                         if (ctx->datalen == 0)
 241                                 cryp_disable_irq_src(device_data,
 242                                                    CRYP_IRQ_SRC_INPUT_FIFO);
 243
 244                         if (ctx->config.algomode == CRYP_ALGO_AES_XTS) {
 245                                 CRYP_PUT_BITS(&device_data->base->cr,
 246                                               CRYP_START_ENABLE,
 247                                               CRYP_CR_START_POS,
 248                                               CRYP_CR_START_MASK);
 249
 250                                 cryp_wait_until_done(device_data);
 251                         }
 252                 }
 253         }
 254
 255         return IRQ_HANDLED;
 256 }
 257
 258 static int mode_is_aes(enum cryp_algo_mode mode)
 259 {
 260         return  CRYP_ALGO_AES_ECB == mode ||
 261                 CRYP_ALGO_AES_CBC == mode ||
 262                 CRYP_ALGO_AES_CTR == mode ||
 263                 CRYP_ALGO_AES_XTS == mode;
 264 }
 265
 266 static int cfg_iv(struct cryp_device_data *device_data, u32 left, u32 right,
 267                   enum cryp_init_vector_index index)
 268 {
 269         struct cryp_init_vector_value vector_value;
 270
 271         dev_dbg(device_data->dev, "[%s]", __func__);
 272
 273         vector_value.init_value_left = left;
 274         vector_value.init_value_right = right;
 275
 276         return cryp_configure_init_vector(device_data,
 277                                           index,
 278                                           vector_value);
 279 }
 280
 281 static int cfg_ivs(struct cryp_device_data *device_data, struct cryp_ctx *ctx)
 282 {
 283         int i;
 284         int status = 0;
 285         int num_of_regs = ctx->blocksize / 8;
 286         u32 iv[AES_BLOCK_SIZE / 4];
 287
 288         dev_dbg(device_data->dev, "[%s]", __func__);
 289
 290         /*
 291          * Since we loop on num_of_regs we need to have a check in case
 292          * someone provides an incorrect blocksize which would force calling
 293          * cfg_iv with i greater than 2 which is an error.
 294          */
 295         if (num_of_regs > 2) {
 296                 dev_err(device_data->dev, "[%s] Incorrect blocksize %d",
 297                         __func__, ctx->blocksize);
 298                 return -EINVAL;
 299         }
 300
 301         for (i = 0; i < ctx->blocksize / 4; i++)
 302                 iv[i] = uint8p_to_uint32_be(ctx->iv + i*4);
 303
 304         for (i = 0; i < num_of_regs; i++) {
 305                 status = cfg_iv(device_data, iv[i*2], iv[i*2+1],
 306                                 (enum cryp_init_vector_index) i);
 307                 if (status != 0)
 308                         return status;
 309         }
 310         return status;
 311 }
 312
 313 static int set_key(struct cryp_device_data *device_data,
 314                    u32 left_key,
 315                    u32 right_key,
 316                    enum cryp_key_reg_index index)
 317 {
 318         struct cryp_key_value key_value;
 319         int cryp_error;
 320
 321         dev_dbg(device_data->dev, "[%s]", __func__);
 322
 323         key_value.key_value_left = left_key;
 324         key_value.key_value_right = right_key;
 325
 326         cryp_error = cryp_configure_key_values(device_data,
 327                                                index,
 328                                                key_value);
 329         if (cryp_error != 0)
 330                 dev_err(device_data->dev, "[%s]: "
 331                         "cryp_configure_key_values() failed!", __func__);
 332
 333         return cryp_error;
 334 }
 335
 336 static int cfg_keys(struct cryp_ctx *ctx)
 337 {
 338         int i;
 339         int num_of_regs = ctx->keylen / 8;
 340         u32 swapped_key[CRYP_MAX_KEY_SIZE / 4];
 341         int cryp_error = 0;
 342
 343         dev_dbg(ctx->device->dev, "[%s]", __func__);
 344
 345         if (mode_is_aes(ctx->config.algomode)) {
 346                 swap_words_in_key_and_bits_in_byte((u8 *)ctx->key,
 347                                                    (u8 *)swapped_key,
 348                                                    ctx->keylen);
 349         } else {
 350                 for (i = 0; i < ctx->keylen / 4; i++)
 351                         swapped_key[i] = uint8p_to_uint32_be(ctx->key + i*4);
 352         }
 353
 354         for (i = 0; i < num_of_regs; i++) {
 355                 cryp_error = set_key(ctx->device,
 356                                      *(((u32 *)swapped_key)+i*2),
 357                                      *(((u32 *)swapped_key)+i*2+1),
 358                                      (enum cryp_key_reg_index) i);
 359
 360                 if (cryp_error != 0) {
 361                         dev_err(ctx->device->dev, "[%s]: set_key() failed!",
 362                                         __func__);
 363                         return cryp_error;
 364                 }
 365         }
 366         return cryp_error;
 367 }
 368
 369 static int cryp_setup_context(struct cryp_ctx *ctx,
 370                               struct cryp_device_data *device_data)
 371 {
 372         u32 control_register = CRYP_CR_DEFAULT;
 373
 374         switch (cryp_mode) {
 375         case CRYP_MODE_INTERRUPT:
 376                 writel_relaxed(CRYP_IMSC_DEFAULT, &device_data->base->imsc);
 377                 break;
 378
 379         case CRYP_MODE_DMA:
 380                 writel_relaxed(CRYP_DMACR_DEFAULT, &device_data->base->dmacr);
 381                 break;
 382
 383         default:
 384                 break;
 385         }
 386
 387         if (ctx->updated == 0) {
 388                 cryp_flush_inoutfifo(device_data);
 389                 if (cfg_keys(ctx) != 0) {
 390                         dev_err(ctx->device->dev, "[%s]: cfg_keys failed!",
 391                                 __func__);
 392                         return -EINVAL;
 393                 }
 394
 395                 if (ctx->iv &&
 396                     CRYP_ALGO_AES_ECB != ctx->config.algomode &&
 397                     CRYP_ALGO_DES_ECB != ctx->config.algomode &&
 398                     CRYP_ALGO_TDES_ECB != ctx->config.algomode) {
 399                         if (cfg_ivs(device_data, ctx) != 0)
 400                                 return -EPERM;
 401                 }
 402
 403                 cryp_set_configuration(device_data, &ctx->config,
 404                                        &control_register);
 405                 add_session_id(ctx);
 406         } else if (ctx->updated == 1 &&
 407                    ctx->session_id != atomic_read(&session_id)) {
 408                 cryp_flush_inoutfifo(device_data);
 409                 cryp_restore_device_context(device_data, &ctx->dev_ctx);
 410
 411                 add_session_id(ctx);
 412                 control_register = ctx->dev_ctx.cr;
 413         } else
 414                 control_register = ctx->dev_ctx.cr;
 415
 416         writel(control_register |
 417                (CRYP_CRYPEN_ENABLE << CRYP_CR_CRYPEN_POS),
 418                &device_data->base->cr);
 419
 420         return 0;
 421 }
 422
 423 static int cryp_get_device_data(struct cryp_ctx *ctx,
 424                                 struct cryp_device_data **device_data)
 425 {
 426         int ret;
 427         struct klist_iter device_iterator;
 428         struct klist_node *device_node;
 429         struct cryp_device_data *local_device_data = NULL;
 430         pr_debug(DEV_DBG_NAME " [%s]", __func__);
 431
 432         /* Wait until a device is available */
 433         ret = down_interruptible(&driver_data.device_allocation);
 434         if (ret)
 435                 return ret;  /* Interrupted */
 436
 437         /* Select a device */
 438         klist_iter_init(&driver_data.device_list, &device_iterator);
 439
 440         device_node = klist_next(&device_iterator);
 441         while (device_node) {
 442                 local_device_data = container_of(device_node,
 443                                            struct cryp_device_data, list_node);
 444                 spin_lock(&local_device_data->ctx_lock);
 445                 /* current_ctx allocates a device, NULL = unallocated */
 446                 if (local_device_data->current_ctx) {
 447                         device_node = klist_next(&device_iterator);
 448                 } else {
 449                         local_device_data->current_ctx = ctx;
 450                         ctx->device = local_device_data;
 451                         spin_unlock(&local_device_data->ctx_lock);
 452                         break;
 453                 }
 454                 spin_unlock(&local_device_data->ctx_lock);
 455         }
 456         klist_iter_exit(&device_iterator);
 457
 458         if (!device_node) {
 459                 /**
 460                  * No free device found.
 461                  * Since we allocated a device with down_interruptible, this
 462                  * should not be able to happen.
 463                  * Number of available devices, which are contained in
 464                  * device_allocation, is therefore decremented by not doing
 465                  * an up(device_allocation).
 466                  */
 467                 return -EBUSY;
 468         }
 469
 470         *device_data = local_device_data;
 471
 472         return 0;
 473 }
 474
 475 static void cryp_dma_setup_channel(struct cryp_device_data *device_data,
 476                                    struct device *dev)
 477 {
 478         struct dma_slave_config mem2cryp = {
 479                 .direction = DMA_MEM_TO_DEV,
 480                 .dst_addr = device_data->phybase + CRYP_DMA_TX_FIFO,
 481                 .dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
 482                 .dst_maxburst = 4,
 483         };
 484         struct dma_slave_config cryp2mem = {
 485                 .direction = DMA_DEV_TO_MEM,
 486                 .src_addr = device_data->phybase + CRYP_DMA_RX_FIFO,
 487                 .src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
 488                 .src_maxburst = 4,
 489         };
 490
 491         dma_cap_zero(device_data->dma.mask);
 492         dma_cap_set(DMA_SLAVE, device_data->dma.mask);
 493
 494         device_data->dma.cfg_mem2cryp = mem_to_engine;
 495         device_data->dma.chan_mem2cryp =
 496                 dma_request_channel(device_data->dma.mask,
 497                                     stedma40_filter,
 498                                     device_data->dma.cfg_mem2cryp);
 499
 500         device_data->dma.cfg_cryp2mem = engine_to_mem;
 501         device_data->dma.chan_cryp2mem =
 502                 dma_request_channel(device_data->dma.mask,
 503                                     stedma40_filter,
 504                                     device_data->dma.cfg_cryp2mem);
 505
 506         dmaengine_slave_config(device_data->dma.chan_mem2cryp, &mem2cryp);
 507         dmaengine_slave_config(device_data->dma.chan_cryp2mem, &cryp2mem);
 508
 509         init_completion(&device_data->dma.cryp_dma_complete);
 510 }
 511
 512 static void cryp_dma_out_callback(void *data)
 513 {
 514         struct cryp_ctx *ctx = (struct cryp_ctx *) data;
 515         dev_dbg(ctx->device->dev, "[%s]: ", __func__);
 516
 517         complete(&ctx->device->dma.cryp_dma_complete);
 518 }
 519
 520 static int cryp_set_dma_transfer(struct cryp_ctx *ctx,
 521                                  struct scatterlist *sg,
 522                                  int len,
 523                                  enum dma_data_direction direction)
 524 {
 525         struct dma_async_tx_descriptor *desc;
 526         struct dma_chan *channel = NULL;
 527         dma_cookie_t cookie;
 528
 529         dev_dbg(ctx->device->dev, "[%s]: ", __func__);
 530
 531         if (unlikely(!IS_ALIGNED((u32)sg, 4))) {
 532                 dev_err(ctx->device->dev, "[%s]: Data in sg list isn't "
 533                         "aligned! Addr: 0x%08x", __func__, (u32)sg);
 534                 return -EFAULT;
 535         }
 536
 537         switch (direction) {
 538         case DMA_TO_DEVICE:
 539                 channel = ctx->device->dma.chan_mem2cryp;
 540                 ctx->device->dma.sg_src = sg;
 541                 ctx->device->dma.sg_src_len = dma_map_sg(channel->device->dev,
 542                                                  ctx->device->dma.sg_src,
 543                                                  ctx->device->dma.nents_src,
 544                                                  direction);
 545
 546                 if (!ctx->device->dma.sg_src_len) {
 547                         dev_dbg(ctx->device->dev,
 548                                 "[%s]: Could not map the sg list (TO_DEVICE)",
 549                                 __func__);
 550                         return -EFAULT;
 551                 }
 552
 553                 dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer "
 554                         "(TO_DEVICE)", __func__);
 555
 556                 desc = dmaengine_prep_slave_sg(channel,
 557                                 ctx->device->dma.sg_src,
 558                                 ctx->device->dma.sg_src_len,
 559                                 direction, DMA_CTRL_ACK);
 560                 break;
 561
 562         case DMA_FROM_DEVICE:
 563                 channel = ctx->device->dma.chan_cryp2mem;
 564                 ctx->device->dma.sg_dst = sg;
 565                 ctx->device->dma.sg_dst_len = dma_map_sg(channel->device->dev,
 566                                                  ctx->device->dma.sg_dst,
 567                                                  ctx->device->dma.nents_dst,
 568                                                  direction);
 569
 570                 if (!ctx->device->dma.sg_dst_len) {
 571                         dev_dbg(ctx->device->dev,
 572                                 "[%s]: Could not map the sg list (FROM_DEVICE)",
 573                                 __func__);
 574                         return -EFAULT;
 575                 }
 576
 577                 dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer "
 578                         "(FROM_DEVICE)", __func__);
 579
 580                 desc = dmaengine_prep_slave_sg(channel,
 581                                 ctx->device->dma.sg_dst,
 582                                 ctx->device->dma.sg_dst_len,
 583                                 direction,
 584                                 DMA_CTRL_ACK |
 585                                 DMA_PREP_INTERRUPT);
 586
 587                 desc->callback = cryp_dma_out_callback;
 588                 desc->callback_param = ctx;
 589                 break;
 590
 591         default:
 592                 dev_dbg(ctx->device->dev, "[%s]: Invalid DMA direction",
 593                         __func__);
 594                 return -EFAULT;
 595         }
 596
 597         cookie = dmaengine_submit(desc);
 598         dma_async_issue_pending(channel);
 599
 600         return 0;
 601 }
 602
 603 static void cryp_dma_done(struct cryp_ctx *ctx)
 604 {
 605         struct dma_chan *chan;
 606
 607         dev_dbg(ctx->device->dev, "[%s]: ", __func__);
 608
 609         chan = ctx->device->dma.chan_mem2cryp;
 610         dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
 611         dma_unmap_sg(chan->device->dev, ctx->device->dma.sg_src,
 612                      ctx->device->dma.sg_src_len, DMA_TO_DEVICE);
 613
 614         chan = ctx->device->dma.chan_cryp2mem;
 615         dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
 616         dma_unmap_sg(chan->device->dev, ctx->device->dma.sg_dst,
 617                      ctx->device->dma.sg_dst_len, DMA_FROM_DEVICE);
 618 }
 619
 620 static int cryp_dma_write(struct cryp_ctx *ctx, struct scatterlist *sg,
 621                           int len)
 622 {
 623         int error = cryp_set_dma_transfer(ctx, sg, len, DMA_TO_DEVICE);
 624         dev_dbg(ctx->device->dev, "[%s]: ", __func__);
 625
 626         if (error) {
 627                 dev_dbg(ctx->device->dev, "[%s]: cryp_set_dma_transfer() "
 628                         "failed", __func__);
 629                 return error;
 630         }
 631
 632         return len;
 633 }
 634
 635 static int cryp_dma_read(struct cryp_ctx *ctx, struct scatterlist *sg, int len)
 636 {
 637         int error = cryp_set_dma_transfer(ctx, sg, len, DMA_FROM_DEVICE);
 638         if (error) {
 639                 dev_dbg(ctx->device->dev, "[%s]: cryp_set_dma_transfer() "
 640                         "failed", __func__);
 641                 return error;
 642         }
 643
 644         return len;
 645 }
 646
 647 static void cryp_polling_mode(struct cryp_ctx *ctx,
 648                               struct cryp_device_data *device_data)
 649 {
 650         int len = ctx->blocksize / BYTES_PER_WORD;
 651         int remaining_length = ctx->datalen;
 652         u32 *indata = (u32 *)ctx->indata;
 653         u32 *outdata = (u32 *)ctx->outdata;
 654
 655         while (remaining_length > 0) {
 656                 writesl(&device_data->base->din, indata, len);
 657                 indata += len;
 658                 remaining_length -= (len * BYTES_PER_WORD);
 659                 cryp_wait_until_done(device_data);
 660
 661                 readsl(&device_data->base->dout, outdata, len);
 662                 outdata += len;
 663                 cryp_wait_until_done(device_data);
 664         }
 665 }
 666
 667 static int cryp_disable_power(struct device *dev,
 668                               struct cryp_device_data *device_data,
 669                               bool save_device_context)
 670 {
 671         int ret = 0;
 672
 673         dev_dbg(dev, "[%s]", __func__);
 674
 675         spin_lock(&device_data->power_state_spinlock);
 676         if (!device_data->power_state)
 677                 goto out;
 678
 679         spin_lock(&device_data->ctx_lock);
 680         if (save_device_context && device_data->current_ctx) {
 681                 cryp_save_device_context(device_data,
 682                                 &device_data->current_ctx->dev_ctx,
 683                                 cryp_mode);
 684                 device_data->restore_dev_ctx = true;
 685         }
 686         spin_unlock(&device_data->ctx_lock);
 687
 688         clk_disable(device_data->clk);
 689         ret = regulator_disable(device_data->pwr_regulator);
 690         if (ret)
 691                 dev_err(dev, "[%s]: "
 692                                 "regulator_disable() failed!",
 693                                 __func__);
 694
 695         device_data->power_state = false;
 696
 697 out:
 698         spin_unlock(&device_data->power_state_spinlock);
 699
 700         return ret;
 701 }
 702
 703 static int cryp_enable_power(
 704                 struct device *dev,
 705                 struct cryp_device_data *device_data,
 706                 bool restore_device_context)
 707 {
 708         int ret = 0;
 709
 710         dev_dbg(dev, "[%s]", __func__);
 711
 712         spin_lock(&device_data->power_state_spinlock);
 713         if (!device_data->power_state) {
 714                 ret = regulator_enable(device_data->pwr_regulator);
 715                 if (ret) {
 716                         dev_err(dev, "[%s]: regulator_enable() failed!",
 717                                         __func__);
 718                         goto out;
 719                 }
 720
 721                 ret = clk_enable(device_data->clk);
 722                 if (ret) {
 723                         dev_err(dev, "[%s]: clk_enable() failed!",
 724                                         __func__);
 725                         regulator_disable(device_data->pwr_regulator);
 726                         goto out;
 727                 }
 728                 device_data->power_state = true;
 729         }
 730
 731         if (device_data->restore_dev_ctx) {
 732                 spin_lock(&device_data->ctx_lock);
 733                 if (restore_device_context && device_data->current_ctx) {
 734                         device_data->restore_dev_ctx = false;
 735                         cryp_restore_device_context(device_data,
 736                                         &device_data->current_ctx->dev_ctx);
 737                 }
 738                 spin_unlock(&device_data->ctx_lock);
 739         }
 740 out:
 741         spin_unlock(&device_data->power_state_spinlock);
 742
 743         return ret;
 744 }
 745
 746 static int hw_crypt_noxts(struct cryp_ctx *ctx,
 747                           struct cryp_device_data *device_data)
 748 {
 749         int ret = 0;
 750
 751         const u8 *indata = ctx->indata;
 752         u8 *outdata = ctx->outdata;
 753         u32 datalen = ctx->datalen;
 754         u32 outlen = datalen;
 755
 756         pr_debug(DEV_DBG_NAME " [%s]", __func__);
 757
 758         ctx->outlen = ctx->datalen;
 759
 760         if (unlikely(!IS_ALIGNED((u32)indata, 4))) {
 761                 pr_debug(DEV_DBG_NAME " [%s]: Data isn't aligned! Addr: "
 762                          "0x%08x", __func__, (u32)indata);
 763                 return -EINVAL;
 764         }
 765
 766         ret = cryp_setup_context(ctx, device_data);
 767
 768         if (ret)
 769                 goto out;
 770
 771         if (cryp_mode == CRYP_MODE_INTERRUPT) {
 772                 cryp_enable_irq_src(device_data, CRYP_IRQ_SRC_INPUT_FIFO |
 773                                     CRYP_IRQ_SRC_OUTPUT_FIFO);
 774
 775                 /*
 776                  * ctx->outlen is decremented in the cryp_interrupt_handler
 777                  * function. We had to add cpu_relax() (barrier) to make sure
 778                  * that gcc didn't optimze away this variable.
 779                  */
 780                 while (ctx->outlen > 0)
 781                         cpu_relax();
 782         } else if (cryp_mode == CRYP_MODE_POLLING ||
 783                    cryp_mode == CRYP_MODE_DMA) {
 784                 /*
 785                  * The reason for having DMA in this if case is that if we are
 786                  * running cryp_mode = 2, then we separate DMA routines for
 787                  * handling cipher/plaintext > blocksize, except when
 788                  * running the normal CRYPTO_ALG_TYPE_CIPHER, then we still use
 789                  * the polling mode. Overhead of doing DMA setup eats up the
 790                  * benefits using it.
 791                  */
 792                 cryp_polling_mode(ctx, device_data);
 793         } else {
 794                 dev_err(ctx->device->dev, "[%s]: Invalid operation mode!",
 795                         __func__);
 796                 ret = -EPERM;
 797                 goto out;
 798         }
 799
 800         cryp_save_device_context(device_data, &ctx->dev_ctx, cryp_mode);
 801         ctx->updated = 1;
 802
 803 out:
 804         ctx->indata = indata;
 805         ctx->outdata = outdata;
 806         ctx->datalen = datalen;
 807         ctx->outlen = outlen;
 808
 809         return ret;
 810 }
 811
 812 static int get_nents(struct scatterlist *sg, int nbytes)
 813 {
 814         int nents = 0;
 815
 816         while (nbytes > 0) {
 817                 nbytes -= sg->length;
 818                 sg = scatterwalk_sg_next(sg);
 819                 nents++;
 820         }
 821
 822         return nents;
 823 }
 824
 825 static int ablk_dma_crypt(struct ablkcipher_request *areq)
 826 {
 827         struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
 828         struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
 829         struct cryp_device_data *device_data;
 830
 831         int bytes_written = 0;
 832         int bytes_read = 0;
 833         int ret;
 834
 835         pr_debug(DEV_DBG_NAME " [%s]", __func__);
 836
 837         ctx->datalen = areq->nbytes;
 838         ctx->outlen = areq->nbytes;
 839
 840         ret = cryp_get_device_data(ctx, &device_data);
 841         if (ret)
 842                 return ret;
 843
 844         ret = cryp_setup_context(ctx, device_data);
 845         if (ret)
 846                 goto out;
 847
 848         /* We have the device now, so store the nents in the dma struct. */
 849         ctx->device->dma.nents_src = get_nents(areq->src, ctx->datalen);
 850         ctx->device->dma.nents_dst = get_nents(areq->dst, ctx->outlen);
 851
 852         /* Enable DMA in- and output. */
 853         cryp_configure_for_dma(device_data, CRYP_DMA_ENABLE_BOTH_DIRECTIONS);
 854
 855         bytes_written = cryp_dma_write(ctx, areq->src, ctx->datalen);
 856         bytes_read = cryp_dma_read(ctx, areq->dst, bytes_written);
 857
 858         wait_for_completion(&ctx->device->dma.cryp_dma_complete);
 859         cryp_dma_done(ctx);
 860
 861         cryp_save_device_context(device_data, &ctx->dev_ctx, cryp_mode);
 862         ctx->updated = 1;
 863
 864 out:
 865         spin_lock(&device_data->ctx_lock);
 866         device_data->current_ctx = NULL;
 867         ctx->device = NULL;
 868         spin_unlock(&device_data->ctx_lock);
 869
 870         /*
 871          * The down_interruptible part for this semaphore is called in
 872          * cryp_get_device_data.
 873          */
 874         up(&driver_data.device_allocation);
 875
 876         if (unlikely(bytes_written != bytes_read))
 877                 return -EPERM;
 878
 879         return 0;
 880 }
 881
 882 static int ablk_crypt(struct ablkcipher_request *areq)
 883 {
 884         struct ablkcipher_walk walk;
 885         struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
 886         struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
 887         struct cryp_device_data *device_data;
 888         unsigned long src_paddr;
 889         unsigned long dst_paddr;
 890         int ret;
 891         int nbytes;
 892
 893         pr_debug(DEV_DBG_NAME " [%s]", __func__);
 894
 895         ret = cryp_get_device_data(ctx, &device_data);
 896         if (ret)
 897                 goto out;
 898
 899         ablkcipher_walk_init(&walk, areq->dst, areq->src, areq->nbytes);
 900         ret = ablkcipher_walk_phys(areq, &walk);
 901
 902         if (ret) {
 903                 pr_err(DEV_DBG_NAME "[%s]: ablkcipher_walk_phys() failed!",
 904                         __func__);
 905                 goto out;
 906         }
 907
 908         while ((nbytes = walk.nbytes) > 0) {
 909                 ctx->iv = walk.iv;
 910                 src_paddr = (page_to_phys(walk.src.page) + walk.src.offset);
 911                 ctx->indata = phys_to_virt(src_paddr);
 912
 913                 dst_paddr = (page_to_phys(walk.dst.page) + walk.dst.offset);
 914                 ctx->outdata = phys_to_virt(dst_paddr);
 915
 916                 ctx->datalen = nbytes - (nbytes % ctx->blocksize);
 917
 918                 ret = hw_crypt_noxts(ctx, device_data);
 919                 if (ret)
 920                         goto out;
 921
 922                 nbytes -= ctx->datalen;
 923                 ret = ablkcipher_walk_done(areq, &walk, nbytes);
 924                 if (ret)
 925                         goto out;
 926         }
 927         ablkcipher_walk_complete(&walk);
 928
 929 out:
 930         /* Release the device */
 931         spin_lock(&device_data->ctx_lock);
 932         device_data->current_ctx = NULL;
 933         ctx->device = NULL;
 934         spin_unlock(&device_data->ctx_lock);
 935
 936         /*
 937          * The down_interruptible part for this semaphore is called in
 938          * cryp_get_device_data.
 939          */
 940         up(&driver_data.device_allocation);
 941
 942         return ret;
 943 }
 944
 945 static int aes_ablkcipher_setkey(struct crypto_ablkcipher *cipher,
 946                                  const u8 *key, unsigned int keylen)
 947 {
 948         struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
 949         u32 *flags = &cipher->base.crt_flags;
 950
 951         pr_debug(DEV_DBG_NAME " [%s]", __func__);
 952
 953         switch (keylen) {
 954         case AES_KEYSIZE_128:
 955                 ctx->config.keysize = CRYP_KEY_SIZE_128;
 956                 break;
 957
 958         case AES_KEYSIZE_192:
 959                 ctx->config.keysize = CRYP_KEY_SIZE_192;
 960                 break;
 961
 962         case AES_KEYSIZE_256:
 963                 ctx->config.keysize = CRYP_KEY_SIZE_256;
 964                 break;
 965
 966         default:
 967                 pr_err(DEV_DBG_NAME "[%s]: Unknown keylen!", __func__);
 968                 *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
 969                 return -EINVAL;
 970         }
 971
 972         memcpy(ctx->key, key, keylen);
 973         ctx->keylen = keylen;
 974
 975         ctx->updated = 0;
 976
 977         return 0;
 978 }
 979
 980 static int des_ablkcipher_setkey(struct crypto_ablkcipher *cipher,
 981                                  const u8 *key, unsigned int keylen)
 982 {
 983         struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
 984         u32 *flags = &cipher->base.crt_flags;
 985         u32 tmp[DES_EXPKEY_WORDS];
 986         int ret;
 987
 988         pr_debug(DEV_DBG_NAME " [%s]", __func__);
 989         if (keylen != DES_KEY_SIZE) {
 990                 *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
 991                 pr_debug(DEV_DBG_NAME " [%s]: CRYPTO_TFM_RES_BAD_KEY_LEN",
 992                                 __func__);
 993                 return -EINVAL;
 994         }
 995
 996         ret = des_ekey(tmp, key);
 997         if (unlikely(ret == 0) && (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
 998                 *flags |= CRYPTO_TFM_RES_WEAK_KEY;
 999                 pr_debug(DEV_DBG_NAME " [%s]: CRYPTO_TFM_REQ_WEAK_KEY",
1000                                 __func__);
1001                 return -EINVAL;
1002         }
1003
1004         memcpy(ctx->key, key, keylen);
1005         ctx->keylen = keylen;
1006
1007         ctx->updated = 0;
1008         return 0;
1009 }
1010
1011 static int des3_ablkcipher_setkey(struct crypto_ablkcipher *cipher,
1012                                   const u8 *key, unsigned int keylen)
1013 {
1014         struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
1015         u32 *flags = &cipher->base.crt_flags;
1016         const u32 *K = (const u32 *)key;
1017         u32 tmp[DES3_EDE_EXPKEY_WORDS];
1018         int i, ret;
1019
1020         pr_debug(DEV_DBG_NAME " [%s]", __func__);
1021         if (keylen != DES3_EDE_KEY_SIZE) {
1022                 *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
1023                 pr_debug(DEV_DBG_NAME " [%s]: CRYPTO_TFM_RES_BAD_KEY_LEN",
1024                                 __func__);
1025                 return -EINVAL;
1026         }
1027
1028         /* Checking key interdependency for weak key detection. */
1029         if (unlikely(!((K[0] ^ K[2]) | (K[1] ^ K[3])) ||
1030                                 !((K[2] ^ K[4]) | (K[3] ^ K[5]))) &&
1031                         (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
1032                 *flags |= CRYPTO_TFM_RES_WEAK_KEY;
1033                 pr_debug(DEV_DBG_NAME " [%s]: CRYPTO_TFM_REQ_WEAK_KEY",
1034                                 __func__);
1035                 return -EINVAL;
1036         }
1037         for (i = 0; i < 3; i++) {
1038                 ret = des_ekey(tmp, key + i*DES_KEY_SIZE);
1039                 if (unlikely(ret == 0) && (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
1040                         *flags |= CRYPTO_TFM_RES_WEAK_KEY;
1041                         pr_debug(DEV_DBG_NAME " [%s]: "
1042                                         "CRYPTO_TFM_REQ_WEAK_KEY", __func__);
1043                         return -EINVAL;
1044                 }
1045         }
1046
1047         memcpy(ctx->key, key, keylen);
1048         ctx->keylen = keylen;
1049
1050         ctx->updated = 0;
1051         return 0;
1052 }
1053
1054 static int cryp_blk_encrypt(struct ablkcipher_request *areq)
1055 {
1056         struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
1057         struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
1058
1059         pr_debug(DEV_DBG_NAME " [%s]", __func__);
1060
1061         ctx->config.algodir = CRYP_ALGORITHM_ENCRYPT;
1062
1063         /*
1064          * DMA does not work for DES due to a hw bug */
1065         if (cryp_mode == CRYP_MODE_DMA && mode_is_aes(ctx->config.algomode))
1066                 return ablk_dma_crypt(areq);
1067
1068         /* For everything except DMA, we run the non DMA version. */
1069         return ablk_crypt(areq);
1070 }
1071
1072 static int cryp_blk_decrypt(struct ablkcipher_request *areq)
1073 {
1074         struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
1075         struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
1076
1077         pr_debug(DEV_DBG_NAME " [%s]", __func__);
1078
1079         ctx->config.algodir = CRYP_ALGORITHM_DECRYPT;
1080
1081         /* DMA does not work for DES due to a hw bug */
1082         if (cryp_mode == CRYP_MODE_DMA && mode_is_aes(ctx->config.algomode))
1083                 return ablk_dma_crypt(areq);
1084
1085         /* For everything except DMA, we run the non DMA version. */
1086         return ablk_crypt(areq);
1087 }
1088
1089 struct cryp_algo_template {
1090         enum cryp_algo_mode algomode;
1091         struct crypto_alg crypto;
1092 };
1093
1094 static int cryp_cra_init(struct crypto_tfm *tfm)
1095 {
1096         struct cryp_ctx *ctx = crypto_tfm_ctx(tfm);
1097         struct crypto_alg *alg = tfm->__crt_alg;
1098         struct cryp_algo_template *cryp_alg = container_of(alg,
1099                         struct cryp_algo_template,
1100                         crypto);
1101
1102         ctx->config.algomode = cryp_alg->algomode;
1103         ctx->blocksize = crypto_tfm_alg_blocksize(tfm);
1104
1105         return 0;
1106 }
1107
1108 static struct cryp_algo_template cryp_algs[] = {
1109         {
1110                 .algomode = CRYP_ALGO_AES_ECB,
1111                 .crypto = {
1112                         .cra_name = "aes",
1113                         .cra_driver_name = "aes-ux500",
1114                         .cra_priority = 300,
1115                         .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
1116                                         CRYPTO_ALG_ASYNC,
1117                         .cra_blocksize = AES_BLOCK_SIZE,
1118                         .cra_ctxsize = sizeof(struct cryp_ctx),
1119                         .cra_alignmask = 3,
1120                         .cra_type = &crypto_ablkcipher_type,
1121                         .cra_init = cryp_cra_init,
1122                         .cra_module = THIS_MODULE,
1123                         .cra_u = {
1124                                 .ablkcipher = {
1125                                         .min_keysize = AES_MIN_KEY_SIZE,
1126                                         .max_keysize = AES_MAX_KEY_SIZE,
1127                                         .setkey = aes_ablkcipher_setkey,
1128                                         .encrypt = cryp_blk_encrypt,
1129                                         .decrypt = cryp_blk_decrypt
1130                                 }
1131                         }
1132                 }
1133         },
1134         {
1135                 .algomode = CRYP_ALGO_AES_ECB,
1136                 .crypto = {
1137                         .cra_name = "ecb(aes)",
1138                         .cra_driver_name = "ecb-aes-ux500",
1139                         .cra_priority = 300,
1140                         .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
1141                                         CRYPTO_ALG_ASYNC,
1142                         .cra_blocksize = AES_BLOCK_SIZE,
1143                         .cra_ctxsize = sizeof(struct cryp_ctx),
1144                         .cra_alignmask = 3,
1145                         .cra_type = &crypto_ablkcipher_type,
1146                         .cra_init = cryp_cra_init,
1147                         .cra_module = THIS_MODULE,
1148                         .cra_u = {
1149                                 .ablkcipher = {
1150                                         .min_keysize = AES_MIN_KEY_SIZE,
1151                                         .max_keysize = AES_MAX_KEY_SIZE,
1152                                         .setkey = aes_ablkcipher_setkey,
1153                                         .encrypt = cryp_blk_encrypt,
1154                                         .decrypt = cryp_blk_decrypt,
1155                                 }
1156                         }
1157                 }
1158         },
1159         {
1160                 .algomode = CRYP_ALGO_AES_CBC,
1161                 .crypto = {
1162                         .cra_name = "cbc(aes)",
1163                         .cra_driver_name = "cbc-aes-ux500",
1164                         .cra_priority = 300,
1165                         .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
1166                                         CRYPTO_ALG_ASYNC,
1167                         .cra_blocksize = AES_BLOCK_SIZE,
1168                         .cra_ctxsize = sizeof(struct cryp_ctx),
1169                         .cra_alignmask = 3,
1170                         .cra_type = &crypto_ablkcipher_type,
1171                         .cra_init = cryp_cra_init,
1172                         .cra_module = THIS_MODULE,
1173                         .cra_u = {
1174                                 .ablkcipher = {
1175                                         .min_keysize = AES_MIN_KEY_SIZE,
1176                                         .max_keysize = AES_MAX_KEY_SIZE,
1177                                         .setkey = aes_ablkcipher_setkey,
1178                                         .encrypt = cryp_blk_encrypt,
1179                                         .decrypt = cryp_blk_decrypt,
1180                                         .ivsize = AES_BLOCK_SIZE,
1181                                 }
1182                         }
1183                 }
1184         },
1185         {
1186                 .algomode = CRYP_ALGO_AES_CTR,
1187                 .crypto = {
1188                         .cra_name = "ctr(aes)",
1189                         .cra_driver_name = "ctr-aes-ux500",
1190                         .cra_priority = 300,
1191                         .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
1192                                                 CRYPTO_ALG_ASYNC,
1193                         .cra_blocksize = AES_BLOCK_SIZE,
1194                         .cra_ctxsize = sizeof(struct cryp_ctx),
1195                         .cra_alignmask = 3,
1196                         .cra_type = &crypto_ablkcipher_type,
1197                         .cra_init = cryp_cra_init,
1198                         .cra_module = THIS_MODULE,
1199                         .cra_u = {
1200                                 .ablkcipher = {
1201                                         .min_keysize = AES_MIN_KEY_SIZE,
1202                                         .max_keysize = AES_MAX_KEY_SIZE,
1203                                         .setkey = aes_ablkcipher_setkey,
1204                                         .encrypt = cryp_blk_encrypt,
1205                                         .decrypt = cryp_blk_decrypt,
1206                                         .ivsize = AES_BLOCK_SIZE,
1207                                 }
1208                         }
1209                 }
1210         },
1211         {
1212                 .algomode = CRYP_ALGO_DES_ECB,
1213                 .crypto = {
1214                         .cra_name = "des",
1215                         .cra_driver_name = "des-ux500",
1216                         .cra_priority = 300,
1217                         .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
1218                                                 CRYPTO_ALG_ASYNC,
1219                         .cra_blocksize = DES_BLOCK_SIZE,
1220                         .cra_ctxsize = sizeof(struct cryp_ctx),
1221                         .cra_alignmask = 3,
1222                         .cra_type = &crypto_ablkcipher_type,
1223                         .cra_init = cryp_cra_init,
1224                         .cra_module = THIS_MODULE,
1225                         .cra_u = {
1226                                 .ablkcipher = {
1227                                         .min_keysize = DES_KEY_SIZE,
1228                                         .max_keysize = DES_KEY_SIZE,
1229                                         .setkey = des_ablkcipher_setkey,
1230                                         .encrypt = cryp_blk_encrypt,
1231                                         .decrypt = cryp_blk_decrypt
1232                                 }
1233                         }
1234                 }
1235
1236         },
1237         {
1238                 .algomode = CRYP_ALGO_TDES_ECB,
1239                 .crypto = {
1240                         .cra_name = "des3_ede",
1241                         .cra_driver_name = "des3_ede-ux500",
1242                         .cra_priority = 300,
1243                         .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
1244                                                 CRYPTO_ALG_ASYNC,
1245                         .cra_blocksize = DES3_EDE_BLOCK_SIZE,
1246                         .cra_ctxsize = sizeof(struct cryp_ctx),
1247                         .cra_alignmask = 3,
1248                         .cra_type = &crypto_ablkcipher_type,
1249                         .cra_init = cryp_cra_init,
1250                         .cra_module = THIS_MODULE,
1251                         .cra_u = {
1252                                 .ablkcipher = {
1253                                         .min_keysize = DES3_EDE_KEY_SIZE,
1254                                         .max_keysize = DES3_EDE_KEY_SIZE,
1255                                         .setkey = des_ablkcipher_setkey,
1256                                         .encrypt = cryp_blk_encrypt,
1257                                         .decrypt = cryp_blk_decrypt
1258                                 }
1259                         }
1260                 }
1261         },
1262         {
1263                 .algomode = CRYP_ALGO_DES_ECB,
1264                 .crypto = {
1265                         .cra_name = "ecb(des)",
1266                         .cra_driver_name = "ecb-des-ux500",
1267                         .cra_priority = 300,
1268                         .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
1269                                         CRYPTO_ALG_ASYNC,
1270                         .cra_blocksize = DES_BLOCK_SIZE,
1271                         .cra_ctxsize = sizeof(struct cryp_ctx),
1272                         .cra_alignmask = 3,
1273                         .cra_type = &crypto_ablkcipher_type,
1274                         .cra_init = cryp_cra_init,
1275                         .cra_module = THIS_MODULE,
1276                         .cra_u = {
1277                                 .ablkcipher = {
1278                                         .min_keysize = DES_KEY_SIZE,
1279                                         .max_keysize = DES_KEY_SIZE,
1280                                         .setkey = des_ablkcipher_setkey,
1281                                         .encrypt = cryp_blk_encrypt,
1282                                         .decrypt = cryp_blk_decrypt,
1283                                 }
1284                         }
1285                 }
1286         },
1287         {
1288                 .algomode = CRYP_ALGO_TDES_ECB,
1289                 .crypto = {
1290                         .cra_name = "ecb(des3_ede)",
1291                         .cra_driver_name = "ecb-des3_ede-ux500",
1292                         .cra_priority = 300,
1293                         .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
1294                                         CRYPTO_ALG_ASYNC,
1295                         .cra_blocksize = DES3_EDE_BLOCK_SIZE,
1296                         .cra_ctxsize = sizeof(struct cryp_ctx),
1297                         .cra_alignmask = 3,
1298                         .cra_type = &crypto_ablkcipher_type,
1299                         .cra_init = cryp_cra_init,
1300                         .cra_module = THIS_MODULE,
1301                         .cra_u = {
1302                                 .ablkcipher = {
1303                                         .min_keysize = DES3_EDE_KEY_SIZE,
1304                                         .max_keysize = DES3_EDE_KEY_SIZE,
1305                                         .setkey = des3_ablkcipher_setkey,
1306                                         .encrypt = cryp_blk_encrypt,
1307                                         .decrypt = cryp_blk_decrypt,
1308                                 }
1309                         }
1310                 }
1311         },
1312         {
1313                 .algomode = CRYP_ALGO_DES_CBC,
1314                 .crypto = {
1315                         .cra_name = "cbc(des)",
1316                         .cra_driver_name = "cbc-des-ux500",
1317                         .cra_priority = 300,
1318                         .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
1319                                         CRYPTO_ALG_ASYNC,
1320                         .cra_blocksize = DES_BLOCK_SIZE,
1321                         .cra_ctxsize = sizeof(struct cryp_ctx),
1322                         .cra_alignmask = 3,
1323                         .cra_type = &crypto_ablkcipher_type,
1324                         .cra_init = cryp_cra_init,
1325                         .cra_module = THIS_MODULE,
1326                         .cra_u = {
1327                                 .ablkcipher = {
1328                                         .min_keysize = DES_KEY_SIZE,
1329                                         .max_keysize = DES_KEY_SIZE,
1330                                         .setkey = des_ablkcipher_setkey,
1331                                         .encrypt = cryp_blk_encrypt,
1332                                         .decrypt = cryp_blk_decrypt,
1333                                 }
1334                         }
1335                 }
1336         },
1337         {
1338                 .algomode = CRYP_ALGO_TDES_CBC,
1339                 .crypto = {
1340                         .cra_name = "cbc(des3_ede)",
1341                         .cra_driver_name = "cbc-des3_ede-ux500",
1342                         .cra_priority = 300,
1343                         .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
1344                                         CRYPTO_ALG_ASYNC,
1345                         .cra_blocksize = DES3_EDE_BLOCK_SIZE,
1346                         .cra_ctxsize = sizeof(struct cryp_ctx),
1347                         .cra_alignmask = 3,
1348                         .cra_type = &crypto_ablkcipher_type,
1349                         .cra_init = cryp_cra_init,
1350                         .cra_module = THIS_MODULE,
1351                         .cra_u = {
1352                                 .ablkcipher = {
1353                                         .min_keysize = DES3_EDE_KEY_SIZE,
1354                                         .max_keysize = DES3_EDE_KEY_SIZE,
1355                                         .setkey = des3_ablkcipher_setkey,
1356                                         .encrypt = cryp_blk_encrypt,
1357                                         .decrypt = cryp_blk_decrypt,
1358                                         .ivsize = DES3_EDE_BLOCK_SIZE,
1359                                 }
1360                         }
1361                 }
1362         }
1363 };
1364
1365 /**
1366  * cryp_algs_register_all -
1367  */
1368 static int cryp_algs_register_all(void)
1369 {
1370         int ret;
1371         int i;
1372         int count;
1373
1374         pr_debug("[%s]", __func__);
1375
1376         for (i = 0; i < ARRAY_SIZE(cryp_algs); i++) {
1377                 ret = crypto_register_alg(&cryp_algs[i].crypto);
1378                 if (ret) {
1379                         count = i;
1380                         pr_err("[%s] alg registration failed",
1381                                         cryp_algs[i].crypto.cra_driver_name);
1382                         goto unreg;
1383                 }
1384         }
1385         return 0;
1386 unreg:
1387         for (i = 0; i < count; i++)
1388                 crypto_unregister_alg(&cryp_algs[i].crypto);
1389         return ret;
1390 }
1391
1392 /**
1393  * cryp_algs_unregister_all -
1394  */
1395 static void cryp_algs_unregister_all(void)
1396 {
1397         int i;
1398
1399         pr_debug(DEV_DBG_NAME " [%s]", __func__);
1400
1401         for (i = 0; i < ARRAY_SIZE(cryp_algs); i++)
1402                 crypto_unregister_alg(&cryp_algs[i].crypto);
1403 }
1404
1405 static int ux500_cryp_probe(struct platform_device *pdev)
1406 {
1407         int ret;
1408         int cryp_error = 0;
1409         struct resource *res = NULL;
1410         struct resource *res_irq = NULL;
1411         struct cryp_device_data *device_data;
1412         struct cryp_protection_config prot = {
1413                 .privilege_access = CRYP_STATE_ENABLE
1414         };
1415         struct device *dev = &pdev->dev;
1416
1417         dev_dbg(dev, "[%s]", __func__);
1418         device_data = kzalloc(sizeof(struct cryp_device_data), GFP_ATOMIC);
1419         if (!device_data) {
1420                 dev_err(dev, "[%s]: kzalloc() failed!", __func__);
1421                 ret = -ENOMEM;
1422                 goto out;
1423         }
1424
1425         device_data->dev = dev;
1426         device_data->current_ctx = NULL;
1427
1428         /* Grab the DMA configuration from platform data. */
1429         mem_to_engine = &((struct cryp_platform_data *)
1430                          dev->platform_data)->mem_to_engine;
1431         engine_to_mem = &((struct cryp_platform_data *)
1432                          dev->platform_data)->engine_to_mem;
1433
1434         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1435         if (!res) {
1436                 dev_err(dev, "[%s]: platform_get_resource() failed",
1437                                 __func__);
1438                 ret = -ENODEV;
1439                 goto out_kfree;
1440         }
1441
1442         res = request_mem_region(res->start, resource_size(res), pdev->name);
1443         if (res == NULL) {
1444                 dev_err(dev, "[%s]: request_mem_region() failed",
1445                                 __func__);
1446                 ret = -EBUSY;
1447                 goto out_kfree;
1448         }
1449
1450         device_data->phybase = res->start;
1451         device_data->base = ioremap(res->start, resource_size(res));
1452         if (!device_data->base) {
1453                 dev_err(dev, "[%s]: ioremap failed!", __func__);
1454                 ret = -ENOMEM;
1455                 goto out_free_mem;
1456         }
1457
1458         spin_lock_init(&device_data->ctx_lock);
1459         spin_lock_init(&device_data->power_state_spinlock);
1460
1461         /* Enable power for CRYP hardware block */
1462         device_data->pwr_regulator = regulator_get(&pdev->dev, "v-ape");
1463         if (IS_ERR(device_data->pwr_regulator)) {
1464                 dev_err(dev, "[%s]: could not get cryp regulator", __func__);
1465                 ret = PTR_ERR(device_data->pwr_regulator);
1466                 device_data->pwr_regulator = NULL;
1467                 goto out_unmap;
1468         }
1469
1470         /* Enable the clk for CRYP hardware block */
1471         device_data->clk = clk_get(&pdev->dev, NULL);
1472         if (IS_ERR(device_data->clk)) {
1473                 dev_err(dev, "[%s]: clk_get() failed!", __func__);
1474                 ret = PTR_ERR(device_data->clk);
1475                 goto out_regulator;
1476         }
1477
1478         ret = clk_prepare(device_data->clk);
1479         if (ret) {
1480                 dev_err(dev, "[%s]: clk_prepare() failed!", __func__);
1481                 goto out_clk;
1482         }
1483
1484         /* Enable device power (and clock) */
1485         ret = cryp_enable_power(device_data->dev, device_data, false);
1486         if (ret) {
1487                 dev_err(dev, "[%s]: cryp_enable_power() failed!", __func__);
1488                 goto out_clk_unprepare;
1489         }
1490
1491         cryp_error = cryp_check(device_data);
1492         if (cryp_error != 0) {
1493                 dev_err(dev, "[%s]: cryp_init() failed!", __func__);
1494                 ret = -EINVAL;
1495                 goto out_power;
1496         }
1497
1498         cryp_error = cryp_configure_protection(device_data, &prot);
1499         if (cryp_error != 0) {
1500                 dev_err(dev, "[%s]: cryp_configure_protection() failed!",
1501                         __func__);
1502                 ret = -EINVAL;
1503                 goto out_power;
1504         }
1505
1506         res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1507         if (!res_irq) {
1508                 dev_err(dev, "[%s]: IORESOURCE_IRQ unavailable",
1509                         __func__);
1510                 ret = -ENODEV;
1511                 goto out_power;
1512         }
1513
1514         ret = request_irq(res_irq->start,
1515                           cryp_interrupt_handler,
1516                           0,
1517                           "cryp1",
1518                           device_data);
1519         if (ret) {
1520                 dev_err(dev, "[%s]: Unable to request IRQ", __func__);
1521                 goto out_power;
1522         }
1523
1524         if (cryp_mode == CRYP_MODE_DMA)
1525                 cryp_dma_setup_channel(device_data, dev);
1526
1527         platform_set_drvdata(pdev, device_data);
1528
1529         /* Put the new device into the device list... */
1530         klist_add_tail(&device_data->list_node, &driver_data.device_list);
1531
1532         /* ... and signal that a new device is available. */
1533         up(&driver_data.device_allocation);
1534
1535         atomic_set(&session_id, 1);
1536
1537         ret = cryp_algs_register_all();
1538         if (ret) {
1539                 dev_err(dev, "[%s]: cryp_algs_register_all() failed!",
1540                         __func__);
1541                 goto out_power;
1542         }
1543
1544         dev_info(dev, "successfully registered\n");
1545
1546         return 0;
1547
1548 out_power:
1549         cryp_disable_power(device_data->dev, device_data, false);
1550
1551 out_clk_unprepare:
1552         clk_unprepare(device_data->clk);
1553
1554 out_clk:
1555         clk_put(device_data->clk);
1556
1557 out_regulator:
1558         regulator_put(device_data->pwr_regulator);
1559
1560 out_unmap:
1561         iounmap(device_data->base);
1562
1563 out_free_mem:
1564         release_mem_region(res->start, resource_size(res));
1565
1566 out_kfree:
1567         kfree(device_data);
1568 out:
1569         return ret;
1570 }
1571
1572 static int ux500_cryp_remove(struct platform_device *pdev)
1573 {
1574         struct resource *res = NULL;
1575         struct resource *res_irq = NULL;
1576         struct cryp_device_data *device_data;
1577
1578         dev_dbg(&pdev->dev, "[%s]", __func__);
1579         device_data = platform_get_drvdata(pdev);
1580         if (!device_data) {
1581                 dev_err(&pdev->dev, "[%s]: platform_get_drvdata() failed!",
1582                         __func__);
1583                 return -ENOMEM;
1584         }
1585
1586         /* Try to decrease the number of available devices. */
1587         if (down_trylock(&driver_data.device_allocation))
1588                 return -EBUSY;
1589
1590         /* Check that the device is free */
1591         spin_lock(&device_data->ctx_lock);
1592         /* current_ctx allocates a device, NULL = unallocated */
1593         if (device_data->current_ctx) {
1594                 /* The device is busy */
1595                 spin_unlock(&device_data->ctx_lock);
1596                 /* Return the device to the pool. */
1597                 up(&driver_data.device_allocation);
1598                 return -EBUSY;
1599         }
1600
1601         spin_unlock(&device_data->ctx_lock);
1602
1603         /* Remove the device from the list */
1604         if (klist_node_attached(&device_data->list_node))
1605                 klist_remove(&device_data->list_node);
1606
1607         /* If this was the last device, remove the services */
1608         if (list_empty(&driver_data.device_list.k_list))
1609                 cryp_algs_unregister_all();
1610
1611         res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1612         if (!res_irq)
1613                 dev_err(&pdev->dev, "[%s]: IORESOURCE_IRQ, unavailable",
1614                         __func__);
1615         else {
1616                 disable_irq(res_irq->start);
1617                 free_irq(res_irq->start, device_data);
1618         }
1619
1620         if (cryp_disable_power(&pdev->dev, device_data, false))
1621                 dev_err(&pdev->dev, "[%s]: cryp_disable_power() failed",
1622                         __func__);
1623
1624         clk_unprepare(device_data->clk);
1625         clk_put(device_data->clk);
1626         regulator_put(device_data->pwr_regulator);
1627
1628         iounmap(device_data->base);
1629
1630         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1631         if (res)
1632                 release_mem_region(res->start, resource_size(res));
1633
1634         kfree(device_data);
1635
1636         return 0;
1637 }
1638
1639 static void ux500_cryp_shutdown(struct platform_device *pdev)
1640 {
1641         struct resource *res_irq = NULL;
1642         struct cryp_device_data *device_data;
1643
1644         dev_dbg(&pdev->dev, "[%s]", __func__);
1645
1646         device_data = platform_get_drvdata(pdev);
1647         if (!device_data) {
1648                 dev_err(&pdev->dev, "[%s]: platform_get_drvdata() failed!",
1649                         __func__);
1650                 return;
1651         }
1652
1653         /* Check that the device is free */
1654         spin_lock(&device_data->ctx_lock);
1655         /* current_ctx allocates a device, NULL = unallocated */
1656         if (!device_data->current_ctx) {
1657                 if (down_trylock(&driver_data.device_allocation))
1658                         dev_dbg(&pdev->dev, "[%s]: Cryp still in use!"
1659                                 "Shutting down anyway...", __func__);
1660                 /**
1661                  * (Allocate the device)
1662                  * Need to set this to non-null (dummy) value,
1663                  * to avoid usage if context switching.
1664                  */
1665                 device_data->current_ctx++;
1666         }
1667         spin_unlock(&device_data->ctx_lock);
1668
1669         /* Remove the device from the list */
1670         if (klist_node_attached(&device_data->list_node))
1671                 klist_remove(&device_data->list_node);
1672
1673         /* If this was the last device, remove the services */
1674         if (list_empty(&driver_data.device_list.k_list))
1675                 cryp_algs_unregister_all();
1676
1677         res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1678         if (!res_irq)
1679                 dev_err(&pdev->dev, "[%s]: IORESOURCE_IRQ, unavailable",
1680                         __func__);
1681         else {
1682                 disable_irq(res_irq->start);
1683                 free_irq(res_irq->start, device_data);
1684         }
1685
1686         if (cryp_disable_power(&pdev->dev, device_data, false))
1687                 dev_err(&pdev->dev, "[%s]: cryp_disable_power() failed",
1688                         __func__);
1689
1690 }
1691
1692 static int ux500_cryp_suspend(struct device *dev)
1693 {
1694         int ret;
1695         struct platform_device *pdev = to_platform_device(dev);
1696         struct cryp_device_data *device_data;
1697         struct resource *res_irq;
1698         struct cryp_ctx *temp_ctx = NULL;
1699
1700         dev_dbg(dev, "[%s]", __func__);
1701
1702         /* Handle state? */
1703         device_data = platform_get_drvdata(pdev);
1704         if (!device_data) {
1705                 dev_err(dev, "[%s]: platform_get_drvdata() failed!", __func__);
1706                 return -ENOMEM;
1707         }
1708
1709         res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1710         if (!res_irq)
1711                 dev_err(dev, "[%s]: IORESOURCE_IRQ, unavailable", __func__);
1712         else
1713                 disable_irq(res_irq->start);
1714
1715         spin_lock(&device_data->ctx_lock);
1716         if (!device_data->current_ctx)
1717                 device_data->current_ctx++;
1718         spin_unlock(&device_data->ctx_lock);
1719
1720         if (device_data->current_ctx == ++temp_ctx) {
1721                 if (down_interruptible(&driver_data.device_allocation))
1722                         dev_dbg(dev, "[%s]: down_interruptible() failed",
1723                                 __func__);
1724                 ret = cryp_disable_power(dev, device_data, false);
1725
1726         } else
1727                 ret = cryp_disable_power(dev, device_data, true);
1728
1729         if (ret)
1730                 dev_err(dev, "[%s]: cryp_disable_power()", __func__);
1731
1732         return ret;
1733 }
1734
1735 static int ux500_cryp_resume(struct device *dev)
1736 {
1737         int ret = 0;
1738         struct platform_device *pdev = to_platform_device(dev);
1739         struct cryp_device_data *device_data;
1740         struct resource *res_irq;
1741         struct cryp_ctx *temp_ctx = NULL;
1742
1743         dev_dbg(dev, "[%s]", __func__);
1744
1745         device_data = platform_get_drvdata(pdev);
1746         if (!device_data) {
1747                 dev_err(dev, "[%s]: platform_get_drvdata() failed!", __func__);
1748                 return -ENOMEM;
1749         }
1750
1751         spin_lock(&device_data->ctx_lock);
1752         if (device_data->current_ctx == ++temp_ctx)
1753                 device_data->current_ctx = NULL;
1754         spin_unlock(&device_data->ctx_lock);
1755
1756
1757         if (!device_data->current_ctx)
1758                 up(&driver_data.device_allocation);
1759         else
1760                 ret = cryp_enable_power(dev, device_data, true);
1761
1762         if (ret)
1763                 dev_err(dev, "[%s]: cryp_enable_power() failed!", __func__);
1764         else {
1765                 res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1766                 if (res_irq)
1767                         enable_irq(res_irq->start);
1768         }
1769
1770         return ret;
1771 }
1772
1773 static SIMPLE_DEV_PM_OPS(ux500_cryp_pm, ux500_cryp_suspend, ux500_cryp_resume);
1774
1775 static const struct of_device_id ux500_cryp_match[] = {
1776         { .compatible = "stericsson,ux500-cryp" },
1777         { },
1778 };
1779
1780 static struct platform_driver cryp_driver = {
1781         .probe  = ux500_cryp_probe,
1782         .remove = ux500_cryp_remove,
1783         .shutdown = ux500_cryp_shutdown,
1784         .driver = {
1785                 .owner = THIS_MODULE,
1786                 .name  = "cryp1",
1787                 .of_match_table = ux500_cryp_match,
1788                 .pm    = &ux500_cryp_pm,
1789         }
1790 };
1791
1792 static int __init ux500_cryp_mod_init(void)
1793 {
1794         pr_debug("[%s] is called!", __func__);
1795         klist_init(&driver_data.device_list, NULL, NULL);
1796         /* Initialize the semaphore to 0 devices (locked state) */
1797         sema_init(&driver_data.device_allocation, 0);
1798         return platform_driver_register(&cryp_driver);
1799 }
1800
1801 static void __exit ux500_cryp_mod_fini(void)
1802 {
1803         pr_debug("[%s] is called!", __func__);
1804         platform_driver_unregister(&cryp_driver);
1805         return;
1806 }
1807
1808 module_init(ux500_cryp_mod_init);
1809 module_exit(ux500_cryp_mod_fini);
1810
1811 module_param(cryp_mode, int, 0);
1812
1813 MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 CRYP crypto engine.");
1814 MODULE_ALIAS("aes-all");
1815 MODULE_ALIAS("des-all");
1816
1817 MODULE_LICENSE("GPL");