drivers/dma/qcom/bam_dma.c

   1 /*
   2  * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 and
   6  * only version 2 as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope that it will be useful,
   9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11  * GNU General Public License for more details.
  12  *
  13  */
  14 /*
  15  * QCOM BAM DMA engine driver
  16  *
  17  * QCOM BAM DMA blocks are distributed amongst a number of the on-chip
  18  * peripherals on the MSM 8x74.  The configuration of the channels are dependent
  19  * on the way they are hard wired to that specific peripheral.  The peripheral
  20  * device tree entries specify the configuration of each channel.
  21  *
  22  * The DMA controller requires the use of external memory for storage of the
  23  * hardware descriptors for each channel.  The descriptor FIFO is accessed as a
  24  * circular buffer and operations are managed according to the offset within the
  25  * FIFO.  After pipe/channel reset, all of the pipe registers and internal state
  26  * are back to defaults.
  27  *
  28  * During DMA operations, we write descriptors to the FIFO, being careful to
  29  * handle wrapping and then write the last FIFO offset to that channel's
  30  * P_EVNT_REG register to kick off the transaction.  The P_SW_OFSTS register
  31  * indicates the current FIFO offset that is being processed, so there is some
  32  * indication of where the hardware is currently working.
  33  */
  34
  35 #include <linux/kernel.h>
  36 #include <linux/io.h>
  37 #include <linux/init.h>
  38 #include <linux/slab.h>
  39 #include <linux/module.h>
  40 #include <linux/interrupt.h>
  41 #include <linux/dma-mapping.h>
  42 #include <linux/scatterlist.h>
  43 #include <linux/device.h>
  44 #include <linux/platform_device.h>
  45 #include <linux/of.h>
  46 #include <linux/of_address.h>
  47 #include <linux/of_irq.h>
  48 #include <linux/of_dma.h>
  49 #include <linux/clk.h>
  50 #include <linux/dmaengine.h>
  51
  52 #include "../dmaengine.h"
  53 #include "../virt-dma.h"
  54
  55 struct bam_desc_hw {
  56         __le32 addr;            /* Buffer physical address */
  57         __le16 size;            /* Buffer size in bytes */
  58         __le16 flags;
  59 };
  60
  61 #define DESC_FLAG_INT BIT(15)
  62 #define DESC_FLAG_EOT BIT(14)
  63 #define DESC_FLAG_EOB BIT(13)
  64 #define DESC_FLAG_NWD BIT(12)
  65
  66 struct bam_async_desc {
  67         struct virt_dma_desc vd;
  68
  69         u32 num_desc;
  70         u32 xfer_len;
  71
  72         /* transaction flags, EOT|EOB|NWD */
  73         u16 flags;
  74
  75         struct bam_desc_hw *curr_desc;
  76
  77         enum dma_transfer_direction dir;
  78         size_t length;
  79         struct bam_desc_hw desc[0];
  80 };
  81
  82 enum bam_reg {
  83         BAM_CTRL,
  84         BAM_REVISION,
  85         BAM_NUM_PIPES,
  86         BAM_DESC_CNT_TRSHLD,
  87         BAM_IRQ_SRCS,
  88         BAM_IRQ_SRCS_MSK,
  89         BAM_IRQ_SRCS_UNMASKED,
  90         BAM_IRQ_STTS,
  91         BAM_IRQ_CLR,
  92         BAM_IRQ_EN,
  93         BAM_CNFG_BITS,
  94         BAM_IRQ_SRCS_EE,
  95         BAM_IRQ_SRCS_MSK_EE,
  96         BAM_P_CTRL,
  97         BAM_P_RST,
  98         BAM_P_HALT,
  99         BAM_P_IRQ_STTS,
 100         BAM_P_IRQ_CLR,
 101         BAM_P_IRQ_EN,
 102         BAM_P_EVNT_DEST_ADDR,
 103         BAM_P_EVNT_REG,
 104         BAM_P_SW_OFSTS,
 105         BAM_P_DATA_FIFO_ADDR,
 106         BAM_P_DESC_FIFO_ADDR,
 107         BAM_P_EVNT_GEN_TRSHLD,
 108         BAM_P_FIFO_SIZES,
 109 };
 110
 111 struct reg_offset_data {
 112         u32 base_offset;
 113         unsigned int pipe_mult, evnt_mult, ee_mult;
 114 };
 115
 116 static const struct reg_offset_data bam_v1_3_reg_info[] = {
 117         [BAM_CTRL]              = { 0x0F80, 0x00, 0x00, 0x00 },
 118         [BAM_REVISION]          = { 0x0F84, 0x00, 0x00, 0x00 },
 119         [BAM_NUM_PIPES]         = { 0x0FBC, 0x00, 0x00, 0x00 },
 120         [BAM_DESC_CNT_TRSHLD]   = { 0x0F88, 0x00, 0x00, 0x00 },
 121         [BAM_IRQ_SRCS]          = { 0x0F8C, 0x00, 0x00, 0x00 },
 122         [BAM_IRQ_SRCS_MSK]      = { 0x0F90, 0x00, 0x00, 0x00 },
 123         [BAM_IRQ_SRCS_UNMASKED] = { 0x0FB0, 0x00, 0x00, 0x00 },
 124         [BAM_IRQ_STTS]          = { 0x0F94, 0x00, 0x00, 0x00 },
 125         [BAM_IRQ_CLR]           = { 0x0F98, 0x00, 0x00, 0x00 },
 126         [BAM_IRQ_EN]            = { 0x0F9C, 0x00, 0x00, 0x00 },
 127         [BAM_CNFG_BITS]         = { 0x0FFC, 0x00, 0x00, 0x00 },
 128         [BAM_IRQ_SRCS_EE]       = { 0x1800, 0x00, 0x00, 0x80 },
 129         [BAM_IRQ_SRCS_MSK_EE]   = { 0x1804, 0x00, 0x00, 0x80 },
 130         [BAM_P_CTRL]            = { 0x0000, 0x80, 0x00, 0x00 },
 131         [BAM_P_RST]             = { 0x0004, 0x80, 0x00, 0x00 },
 132         [BAM_P_HALT]            = { 0x0008, 0x80, 0x00, 0x00 },
 133         [BAM_P_IRQ_STTS]        = { 0x0010, 0x80, 0x00, 0x00 },
 134         [BAM_P_IRQ_CLR]         = { 0x0014, 0x80, 0x00, 0x00 },
 135         [BAM_P_IRQ_EN]          = { 0x0018, 0x80, 0x00, 0x00 },
 136         [BAM_P_EVNT_DEST_ADDR]  = { 0x102C, 0x00, 0x40, 0x00 },
 137         [BAM_P_EVNT_REG]        = { 0x1018, 0x00, 0x40, 0x00 },
 138         [BAM_P_SW_OFSTS]        = { 0x1000, 0x00, 0x40, 0x00 },
 139         [BAM_P_DATA_FIFO_ADDR]  = { 0x1024, 0x00, 0x40, 0x00 },
 140         [BAM_P_DESC_FIFO_ADDR]  = { 0x101C, 0x00, 0x40, 0x00 },
 141         [BAM_P_EVNT_GEN_TRSHLD] = { 0x1028, 0x00, 0x40, 0x00 },
 142         [BAM_P_FIFO_SIZES]      = { 0x1020, 0x00, 0x40, 0x00 },
 143 };
 144
 145 static const struct reg_offset_data bam_v1_4_reg_info[] = {
 146         [BAM_CTRL]              = { 0x0000, 0x00, 0x00, 0x00 },
 147         [BAM_REVISION]          = { 0x0004, 0x00, 0x00, 0x00 },
 148         [BAM_NUM_PIPES]         = { 0x003C, 0x00, 0x00, 0x00 },
 149         [BAM_DESC_CNT_TRSHLD]   = { 0x0008, 0x00, 0x00, 0x00 },
 150         [BAM_IRQ_SRCS]          = { 0x000C, 0x00, 0x00, 0x00 },
 151         [BAM_IRQ_SRCS_MSK]      = { 0x0010, 0x00, 0x00, 0x00 },
 152         [BAM_IRQ_SRCS_UNMASKED] = { 0x0030, 0x00, 0x00, 0x00 },
 153         [BAM_IRQ_STTS]          = { 0x0014, 0x00, 0x00, 0x00 },
 154         [BAM_IRQ_CLR]           = { 0x0018, 0x00, 0x00, 0x00 },
 155         [BAM_IRQ_EN]            = { 0x001C, 0x00, 0x00, 0x00 },
 156         [BAM_CNFG_BITS]         = { 0x007C, 0x00, 0x00, 0x00 },
 157         [BAM_IRQ_SRCS_EE]       = { 0x0800, 0x00, 0x00, 0x80 },
 158         [BAM_IRQ_SRCS_MSK_EE]   = { 0x0804, 0x00, 0x00, 0x80 },
 159         [BAM_P_CTRL]            = { 0x1000, 0x1000, 0x00, 0x00 },
 160         [BAM_P_RST]             = { 0x1004, 0x1000, 0x00, 0x00 },
 161         [BAM_P_HALT]            = { 0x1008, 0x1000, 0x00, 0x00 },
 162         [BAM_P_IRQ_STTS]        = { 0x1010, 0x1000, 0x00, 0x00 },
 163         [BAM_P_IRQ_CLR]         = { 0x1014, 0x1000, 0x00, 0x00 },
 164         [BAM_P_IRQ_EN]          = { 0x1018, 0x1000, 0x00, 0x00 },
 165         [BAM_P_EVNT_DEST_ADDR]  = { 0x182C, 0x00, 0x1000, 0x00 },
 166         [BAM_P_EVNT_REG]        = { 0x1818, 0x00, 0x1000, 0x00 },
 167         [BAM_P_SW_OFSTS]        = { 0x1800, 0x00, 0x1000, 0x00 },
 168         [BAM_P_DATA_FIFO_ADDR]  = { 0x1824, 0x00, 0x1000, 0x00 },
 169         [BAM_P_DESC_FIFO_ADDR]  = { 0x181C, 0x00, 0x1000, 0x00 },
 170         [BAM_P_EVNT_GEN_TRSHLD] = { 0x1828, 0x00, 0x1000, 0x00 },
 171         [BAM_P_FIFO_SIZES]      = { 0x1820, 0x00, 0x1000, 0x00 },
 172 };
 173
 174 static const struct reg_offset_data bam_v1_7_reg_info[] = {
 175         [BAM_CTRL]              = { 0x00000, 0x00, 0x00, 0x00 },
 176         [BAM_REVISION]          = { 0x01000, 0x00, 0x00, 0x00 },
 177         [BAM_NUM_PIPES]         = { 0x01008, 0x00, 0x00, 0x00 },
 178         [BAM_DESC_CNT_TRSHLD]   = { 0x00008, 0x00, 0x00, 0x00 },
 179         [BAM_IRQ_SRCS]          = { 0x03010, 0x00, 0x00, 0x00 },
 180         [BAM_IRQ_SRCS_MSK]      = { 0x03014, 0x00, 0x00, 0x00 },
 181         [BAM_IRQ_SRCS_UNMASKED] = { 0x03018, 0x00, 0x00, 0x00 },
 182         [BAM_IRQ_STTS]          = { 0x00014, 0x00, 0x00, 0x00 },
 183         [BAM_IRQ_CLR]           = { 0x00018, 0x00, 0x00, 0x00 },
 184         [BAM_IRQ_EN]            = { 0x0001C, 0x00, 0x00, 0x00 },
 185         [BAM_CNFG_BITS]         = { 0x0007C, 0x00, 0x00, 0x00 },
 186         [BAM_IRQ_SRCS_EE]       = { 0x03000, 0x00, 0x00, 0x1000 },
 187         [BAM_IRQ_SRCS_MSK_EE]   = { 0x03004, 0x00, 0x00, 0x1000 },
 188         [BAM_P_CTRL]            = { 0x13000, 0x1000, 0x00, 0x00 },
 189         [BAM_P_RST]             = { 0x13004, 0x1000, 0x00, 0x00 },
 190         [BAM_P_HALT]            = { 0x13008, 0x1000, 0x00, 0x00 },
 191         [BAM_P_IRQ_STTS]        = { 0x13010, 0x1000, 0x00, 0x00 },
 192         [BAM_P_IRQ_CLR]         = { 0x13014, 0x1000, 0x00, 0x00 },
 193         [BAM_P_IRQ_EN]          = { 0x13018, 0x1000, 0x00, 0x00 },
 194         [BAM_P_EVNT_DEST_ADDR]  = { 0x1382C, 0x00, 0x1000, 0x00 },
 195         [BAM_P_EVNT_REG]        = { 0x13818, 0x00, 0x1000, 0x00 },
 196         [BAM_P_SW_OFSTS]        = { 0x13800, 0x00, 0x1000, 0x00 },
 197         [BAM_P_DATA_FIFO_ADDR]  = { 0x13824, 0x00, 0x1000, 0x00 },
 198         [BAM_P_DESC_FIFO_ADDR]  = { 0x1381C, 0x00, 0x1000, 0x00 },
 199         [BAM_P_EVNT_GEN_TRSHLD] = { 0x13828, 0x00, 0x1000, 0x00 },
 200         [BAM_P_FIFO_SIZES]      = { 0x13820, 0x00, 0x1000, 0x00 },
 201 };
 202
 203 /* BAM CTRL */
 204 #define BAM_SW_RST                      BIT(0)
 205 #define BAM_EN                          BIT(1)
 206 #define BAM_EN_ACCUM                    BIT(4)
 207 #define BAM_TESTBUS_SEL_SHIFT           5
 208 #define BAM_TESTBUS_SEL_MASK            0x3F
 209 #define BAM_DESC_CACHE_SEL_SHIFT        13
 210 #define BAM_DESC_CACHE_SEL_MASK         0x3
 211 #define BAM_CACHED_DESC_STORE           BIT(15)
 212 #define IBC_DISABLE                     BIT(16)
 213
 214 /* BAM REVISION */
 215 #define REVISION_SHIFT          0
 216 #define REVISION_MASK           0xFF
 217 #define NUM_EES_SHIFT           8
 218 #define NUM_EES_MASK            0xF
 219 #define CE_BUFFER_SIZE          BIT(13)
 220 #define AXI_ACTIVE              BIT(14)
 221 #define USE_VMIDMT              BIT(15)
 222 #define SECURED                 BIT(16)
 223 #define BAM_HAS_NO_BYPASS       BIT(17)
 224 #define HIGH_FREQUENCY_BAM      BIT(18)
 225 #define INACTIV_TMRS_EXST       BIT(19)
 226 #define NUM_INACTIV_TMRS        BIT(20)
 227 #define DESC_CACHE_DEPTH_SHIFT  21
 228 #define DESC_CACHE_DEPTH_1      (0 << DESC_CACHE_DEPTH_SHIFT)
 229 #define DESC_CACHE_DEPTH_2      (1 << DESC_CACHE_DEPTH_SHIFT)
 230 #define DESC_CACHE_DEPTH_3      (2 << DESC_CACHE_DEPTH_SHIFT)
 231 #define DESC_CACHE_DEPTH_4      (3 << DESC_CACHE_DEPTH_SHIFT)
 232 #define CMD_DESC_EN             BIT(23)
 233 #define INACTIV_TMR_BASE_SHIFT  24
 234 #define INACTIV_TMR_BASE_MASK   0xFF
 235
 236 /* BAM NUM PIPES */
 237 #define BAM_NUM_PIPES_SHIFT             0
 238 #define BAM_NUM_PIPES_MASK              0xFF
 239 #define PERIPH_NON_PIPE_GRP_SHIFT       16
 240 #define PERIPH_NON_PIP_GRP_MASK         0xFF
 241 #define BAM_NON_PIPE_GRP_SHIFT          24
 242 #define BAM_NON_PIPE_GRP_MASK           0xFF
 243
 244 /* BAM CNFG BITS */
 245 #define BAM_PIPE_CNFG           BIT(2)
 246 #define BAM_FULL_PIPE           BIT(11)
 247 #define BAM_NO_EXT_P_RST        BIT(12)
 248 #define BAM_IBC_DISABLE         BIT(13)
 249 #define BAM_SB_CLK_REQ          BIT(14)
 250 #define BAM_PSM_CSW_REQ         BIT(15)
 251 #define BAM_PSM_P_RES           BIT(16)
 252 #define BAM_AU_P_RES            BIT(17)
 253 #define BAM_SI_P_RES            BIT(18)
 254 #define BAM_WB_P_RES            BIT(19)
 255 #define BAM_WB_BLK_CSW          BIT(20)
 256 #define BAM_WB_CSW_ACK_IDL      BIT(21)
 257 #define BAM_WB_RETR_SVPNT       BIT(22)
 258 #define BAM_WB_DSC_AVL_P_RST    BIT(23)
 259 #define BAM_REG_P_EN            BIT(24)
 260 #define BAM_PSM_P_HD_DATA       BIT(25)
 261 #define BAM_AU_ACCUMED          BIT(26)
 262 #define BAM_CMD_ENABLE          BIT(27)
 263
 264 #define BAM_CNFG_BITS_DEFAULT   (BAM_PIPE_CNFG |        \
 265                                  BAM_NO_EXT_P_RST |     \
 266                                  BAM_IBC_DISABLE |      \
 267                                  BAM_SB_CLK_REQ |       \
 268                                  BAM_PSM_CSW_REQ |      \
 269                                  BAM_PSM_P_RES |        \
 270                                  BAM_AU_P_RES |         \
 271                                  BAM_SI_P_RES |         \
 272                                  BAM_WB_P_RES |         \
 273                                  BAM_WB_BLK_CSW |       \
 274                                  BAM_WB_CSW_ACK_IDL |   \
 275                                  BAM_WB_RETR_SVPNT |    \
 276                                  BAM_WB_DSC_AVL_P_RST | \
 277                                  BAM_REG_P_EN |         \
 278                                  BAM_PSM_P_HD_DATA |    \
 279                                  BAM_AU_ACCUMED |       \
 280                                  BAM_CMD_ENABLE)
 281
 282 /* PIPE CTRL */
 283 #define P_EN                    BIT(1)
 284 #define P_DIRECTION             BIT(3)
 285 #define P_SYS_STRM              BIT(4)
 286 #define P_SYS_MODE              BIT(5)
 287 #define P_AUTO_EOB              BIT(6)
 288 #define P_AUTO_EOB_SEL_SHIFT    7
 289 #define P_AUTO_EOB_SEL_512      (0 << P_AUTO_EOB_SEL_SHIFT)
 290 #define P_AUTO_EOB_SEL_256      (1 << P_AUTO_EOB_SEL_SHIFT)
 291 #define P_AUTO_EOB_SEL_128      (2 << P_AUTO_EOB_SEL_SHIFT)
 292 #define P_AUTO_EOB_SEL_64       (3 << P_AUTO_EOB_SEL_SHIFT)
 293 #define P_PREFETCH_LIMIT_SHIFT  9
 294 #define P_PREFETCH_LIMIT_32     (0 << P_PREFETCH_LIMIT_SHIFT)
 295 #define P_PREFETCH_LIMIT_16     (1 << P_PREFETCH_LIMIT_SHIFT)
 296 #define P_PREFETCH_LIMIT_4      (2 << P_PREFETCH_LIMIT_SHIFT)
 297 #define P_WRITE_NWD             BIT(11)
 298 #define P_LOCK_GROUP_SHIFT      16
 299 #define P_LOCK_GROUP_MASK       0x1F
 300
 301 /* BAM_DESC_CNT_TRSHLD */
 302 #define CNT_TRSHLD              0xffff
 303 #define DEFAULT_CNT_THRSHLD     0x4
 304
 305 /* BAM_IRQ_SRCS */
 306 #define BAM_IRQ                 BIT(31)
 307 #define P_IRQ                   0x7fffffff
 308
 309 /* BAM_IRQ_SRCS_MSK */
 310 #define BAM_IRQ_MSK             BAM_IRQ
 311 #define P_IRQ_MSK               P_IRQ
 312
 313 /* BAM_IRQ_STTS */
 314 #define BAM_TIMER_IRQ           BIT(4)
 315 #define BAM_EMPTY_IRQ           BIT(3)
 316 #define BAM_ERROR_IRQ           BIT(2)
 317 #define BAM_HRESP_ERR_IRQ       BIT(1)
 318
 319 /* BAM_IRQ_CLR */
 320 #define BAM_TIMER_CLR           BIT(4)
 321 #define BAM_EMPTY_CLR           BIT(3)
 322 #define BAM_ERROR_CLR           BIT(2)
 323 #define BAM_HRESP_ERR_CLR       BIT(1)
 324
 325 /* BAM_IRQ_EN */
 326 #define BAM_TIMER_EN            BIT(4)
 327 #define BAM_EMPTY_EN            BIT(3)
 328 #define BAM_ERROR_EN            BIT(2)
 329 #define BAM_HRESP_ERR_EN        BIT(1)
 330
 331 /* BAM_P_IRQ_EN */
 332 #define P_PRCSD_DESC_EN         BIT(0)
 333 #define P_TIMER_EN              BIT(1)
 334 #define P_WAKE_EN               BIT(2)
 335 #define P_OUT_OF_DESC_EN        BIT(3)
 336 #define P_ERR_EN                BIT(4)
 337 #define P_TRNSFR_END_EN         BIT(5)
 338 #define P_DEFAULT_IRQS_EN       (P_PRCSD_DESC_EN | P_ERR_EN | P_TRNSFR_END_EN)
 339
 340 /* BAM_P_SW_OFSTS */
 341 #define P_SW_OFSTS_MASK         0xffff
 342
 343 #define BAM_DESC_FIFO_SIZE      SZ_32K
 344 #define MAX_DESCRIPTORS (BAM_DESC_FIFO_SIZE / sizeof(struct bam_desc_hw) - 1)
 345 #define BAM_MAX_DATA_SIZE       (SZ_32K - 8)
 346
 347 struct bam_chan {
 348         struct virt_dma_chan vc;
 349
 350         struct bam_device *bdev;
 351
 352         /* configuration from device tree */
 353         u32 id;
 354
 355         struct bam_async_desc *curr_txd;        /* current running dma */
 356
 357         /* runtime configuration */
 358         struct dma_slave_config slave;
 359
 360         /* fifo storage */
 361         struct bam_desc_hw *fifo_virt;
 362         dma_addr_t fifo_phys;
 363
 364         /* fifo markers */
 365         unsigned short head;            /* start of active descriptor entries */
 366         unsigned short tail;            /* end of active descriptor entries */
 367
 368         unsigned int initialized;       /* is the channel hw initialized? */
 369         unsigned int paused;            /* is the channel paused? */
 370         unsigned int reconfigure;       /* new slave config? */
 371
 372         struct list_head node;
 373 };
 374
 375 static inline struct bam_chan *to_bam_chan(struct dma_chan *common)
 376 {
 377         return container_of(common, struct bam_chan, vc.chan);
 378 }
 379
 380 struct bam_device {
 381         void __iomem *regs;
 382         struct device *dev;
 383         struct dma_device common;
 384         struct device_dma_parameters dma_parms;
 385         struct bam_chan *channels;
 386         u32 num_channels;
 387
 388         /* execution environment ID, from DT */
 389         u32 ee;
 390
 391         const struct reg_offset_data *layout;
 392
 393         struct clk *bamclk;
 394         int irq;
 395
 396         /* dma start transaction tasklet */
 397         struct tasklet_struct task;
 398 };
 399
 400 /**
 401  * bam_addr - returns BAM register address
 402  * @bdev: bam device
 403  * @pipe: pipe instance (ignored when register doesn't have multiple instances)
 404  * @reg:  register enum
 405  */
 406 static inline void __iomem *bam_addr(struct bam_device *bdev, u32 pipe,
 407                 enum bam_reg reg)
 408 {
 409         const struct reg_offset_data r = bdev->layout[reg];
 410
 411         return bdev->regs + r.base_offset +
 412                 r.pipe_mult * pipe +
 413                 r.evnt_mult * pipe +
 414                 r.ee_mult * bdev->ee;
 415 }
 416
 417 /**
 418  * bam_reset_channel - Reset individual BAM DMA channel
 419  * @bchan: bam channel
 420  *
 421  * This function resets a specific BAM channel
 422  */
 423 static void bam_reset_channel(struct bam_chan *bchan)
 424 {
 425         struct bam_device *bdev = bchan->bdev;
 426
 427         lockdep_assert_held(&bchan->vc.lock);
 428
 429         /* reset channel */
 430         writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_RST));
 431         writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_RST));
 432
 433         /* don't allow cpu to reorder BAM register accesses done after this */
 434         wmb();
 435
 436         /* make sure hw is initialized when channel is used the first time  */
 437         bchan->initialized = 0;
 438 }
 439
 440 /**
 441  * bam_chan_init_hw - Initialize channel hardware
 442  * @bchan: bam channel
 443  *
 444  * This function resets and initializes the BAM channel
 445  */
 446 static void bam_chan_init_hw(struct bam_chan *bchan,
 447         enum dma_transfer_direction dir)
 448 {
 449         struct bam_device *bdev = bchan->bdev;
 450         u32 val;
 451
 452         /* Reset the channel to clear internal state of the FIFO */
 453         bam_reset_channel(bchan);
 454
 455         /*
 456          * write out 8 byte aligned address.  We have enough space for this
 457          * because we allocated 1 more descriptor (8 bytes) than we can use
 458          */
 459         writel_relaxed(ALIGN(bchan->fifo_phys, sizeof(struct bam_desc_hw)),
 460                         bam_addr(bdev, bchan->id, BAM_P_DESC_FIFO_ADDR));
 461         writel_relaxed(BAM_DESC_FIFO_SIZE,
 462                         bam_addr(bdev, bchan->id, BAM_P_FIFO_SIZES));
 463
 464         /* enable the per pipe interrupts, enable EOT, ERR, and INT irqs */
 465         writel_relaxed(P_DEFAULT_IRQS_EN,
 466                         bam_addr(bdev, bchan->id, BAM_P_IRQ_EN));
 467
 468         /* unmask the specific pipe and EE combo */
 469         val = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE));
 470         val |= BIT(bchan->id);
 471         writel_relaxed(val, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE));
 472
 473         /* don't allow cpu to reorder the channel enable done below */
 474         wmb();
 475
 476         /* set fixed direction and mode, then enable channel */
 477         val = P_EN | P_SYS_MODE;
 478         if (dir == DMA_DEV_TO_MEM)
 479                 val |= P_DIRECTION;
 480
 481         writel_relaxed(val, bam_addr(bdev, bchan->id, BAM_P_CTRL));
 482
 483         bchan->initialized = 1;
 484
 485         /* init FIFO pointers */
 486         bchan->head = 0;
 487         bchan->tail = 0;
 488 }
 489
 490 /**
 491  * bam_alloc_chan - Allocate channel resources for DMA channel.
 492  * @chan: specified channel
 493  *
 494  * This function allocates the FIFO descriptor memory
 495  */
 496 static int bam_alloc_chan(struct dma_chan *chan)
 497 {
 498         struct bam_chan *bchan = to_bam_chan(chan);
 499         struct bam_device *bdev = bchan->bdev;
 500
 501         if (bchan->fifo_virt)
 502                 return 0;
 503
 504         /* allocate FIFO descriptor space, but only if necessary */
 505         bchan->fifo_virt = dma_alloc_wc(bdev->dev, BAM_DESC_FIFO_SIZE,
 506                                         &bchan->fifo_phys, GFP_KERNEL);
 507
 508         if (!bchan->fifo_virt) {
 509                 dev_err(bdev->dev, "Failed to allocate desc fifo\n");
 510                 return -ENOMEM;
 511         }
 512
 513         return 0;
 514 }
 515
 516 /**
 517  * bam_free_chan - Frees dma resources associated with specific channel
 518  * @chan: specified channel
 519  *
 520  * Free the allocated fifo descriptor memory and channel resources
 521  *
 522  */
 523 static void bam_free_chan(struct dma_chan *chan)
 524 {
 525         struct bam_chan *bchan = to_bam_chan(chan);
 526         struct bam_device *bdev = bchan->bdev;
 527         u32 val;
 528         unsigned long flags;
 529
 530         vchan_free_chan_resources(to_virt_chan(chan));
 531
 532         if (bchan->curr_txd) {
 533                 dev_err(bchan->bdev->dev, "Cannot free busy channel\n");
 534                 return;
 535         }
 536
 537         spin_lock_irqsave(&bchan->vc.lock, flags);
 538         bam_reset_channel(bchan);
 539         spin_unlock_irqrestore(&bchan->vc.lock, flags);
 540
 541         dma_free_wc(bdev->dev, BAM_DESC_FIFO_SIZE, bchan->fifo_virt,
 542                     bchan->fifo_phys);
 543         bchan->fifo_virt = NULL;
 544
 545         /* mask irq for pipe/channel */
 546         val = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE));
 547         val &= ~BIT(bchan->id);
 548         writel_relaxed(val, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE));
 549
 550         /* disable irq */
 551         writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_IRQ_EN));
 552 }
 553
 554 /**
 555  * bam_slave_config - set slave configuration for channel
 556  * @chan: dma channel
 557  * @cfg: slave configuration
 558  *
 559  * Sets slave configuration for channel
 560  *
 561  */
 562 static int bam_slave_config(struct dma_chan *chan,
 563                             struct dma_slave_config *cfg)
 564 {
 565         struct bam_chan *bchan = to_bam_chan(chan);
 566         unsigned long flag;
 567
 568         spin_lock_irqsave(&bchan->vc.lock, flag);
 569         memcpy(&bchan->slave, cfg, sizeof(*cfg));
 570         bchan->reconfigure = 1;
 571         spin_unlock_irqrestore(&bchan->vc.lock, flag);
 572
 573         return 0;
 574 }
 575
 576 /**
 577  * bam_prep_slave_sg - Prep slave sg transaction
 578  *
 579  * @chan: dma channel
 580  * @sgl: scatter gather list
 581  * @sg_len: length of sg
 582  * @direction: DMA transfer direction
 583  * @flags: DMA flags
 584  * @context: transfer context (unused)
 585  */
 586 static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
 587         struct scatterlist *sgl, unsigned int sg_len,
 588         enum dma_transfer_direction direction, unsigned long flags,
 589         void *context)
 590 {
 591         struct bam_chan *bchan = to_bam_chan(chan);
 592         struct bam_device *bdev = bchan->bdev;
 593         struct bam_async_desc *async_desc;
 594         struct scatterlist *sg;
 595         u32 i;
 596         struct bam_desc_hw *desc;
 597         unsigned int num_alloc = 0;
 598
 599
 600         if (!is_slave_direction(direction)) {
 601                 dev_err(bdev->dev, "invalid dma direction\n");
 602                 return NULL;
 603         }
 604
 605         /* calculate number of required entries */
 606         for_each_sg(sgl, sg, sg_len, i)
 607                 num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_MAX_DATA_SIZE);
 608
 609         /* allocate enough room to accomodate the number of entries */
 610         async_desc = kzalloc(sizeof(*async_desc) +
 611                         (num_alloc * sizeof(struct bam_desc_hw)), GFP_NOWAIT);
 612
 613         if (!async_desc)
 614                 goto err_out;
 615
 616         if (flags & DMA_PREP_FENCE)
 617                 async_desc->flags |= DESC_FLAG_NWD;
 618
 619         if (flags & DMA_PREP_INTERRUPT)
 620                 async_desc->flags |= DESC_FLAG_EOT;
 621         else
 622                 async_desc->flags |= DESC_FLAG_INT;
 623
 624         async_desc->num_desc = num_alloc;
 625         async_desc->curr_desc = async_desc->desc;
 626         async_desc->dir = direction;
 627
 628         /* fill in temporary descriptors */
 629         desc = async_desc->desc;
 630         for_each_sg(sgl, sg, sg_len, i) {
 631                 unsigned int remainder = sg_dma_len(sg);
 632                 unsigned int curr_offset = 0;
 633
 634                 do {
 635                         desc->addr = cpu_to_le32(sg_dma_address(sg) +
 636                                                  curr_offset);
 637
 638                         if (remainder > BAM_MAX_DATA_SIZE) {
 639                                 desc->size = cpu_to_le16(BAM_MAX_DATA_SIZE);
 640                                 remainder -= BAM_MAX_DATA_SIZE;
 641                                 curr_offset += BAM_MAX_DATA_SIZE;
 642                         } else {
 643                                 desc->size = cpu_to_le16(remainder);
 644                                 remainder = 0;
 645                         }
 646
 647                         async_desc->length += desc->size;
 648                         desc++;
 649                 } while (remainder > 0);
 650         }
 651
 652         return vchan_tx_prep(&bchan->vc, &async_desc->vd, flags);
 653
 654 err_out:
 655         kfree(async_desc);
 656         return NULL;
 657 }
 658
 659 /**
 660  * bam_dma_terminate_all - terminate all transactions on a channel
 661  * @bchan: bam dma channel
 662  *
 663  * Dequeues and frees all transactions
 664  * No callbacks are done
 665  *
 666  */
 667 static int bam_dma_terminate_all(struct dma_chan *chan)
 668 {
 669         struct bam_chan *bchan = to_bam_chan(chan);
 670         unsigned long flag;
 671         LIST_HEAD(head);
 672
 673         /* remove all transactions, including active transaction */
 674         spin_lock_irqsave(&bchan->vc.lock, flag);
 675         if (bchan->curr_txd) {
 676                 list_add(&bchan->curr_txd->vd.node, &bchan->vc.desc_issued);
 677                 bchan->curr_txd = NULL;
 678         }
 679
 680         vchan_get_all_descriptors(&bchan->vc, &head);
 681         spin_unlock_irqrestore(&bchan->vc.lock, flag);
 682
 683         vchan_dma_desc_free_list(&bchan->vc, &head);
 684
 685         return 0;
 686 }
 687
 688 /**
 689  * bam_pause - Pause DMA channel
 690  * @chan: dma channel
 691  *
 692  */
 693 static int bam_pause(struct dma_chan *chan)
 694 {
 695         struct bam_chan *bchan = to_bam_chan(chan);
 696         struct bam_device *bdev = bchan->bdev;
 697         unsigned long flag;
 698
 699         spin_lock_irqsave(&bchan->vc.lock, flag);
 700         writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_HALT));
 701         bchan->paused = 1;
 702         spin_unlock_irqrestore(&bchan->vc.lock, flag);
 703
 704         return 0;
 705 }
 706
 707 /**
 708  * bam_resume - Resume DMA channel operations
 709  * @chan: dma channel
 710  *
 711  */
 712 static int bam_resume(struct dma_chan *chan)
 713 {
 714         struct bam_chan *bchan = to_bam_chan(chan);
 715         struct bam_device *bdev = bchan->bdev;
 716         unsigned long flag;
 717
 718         spin_lock_irqsave(&bchan->vc.lock, flag);
 719         writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_HALT));
 720         bchan->paused = 0;
 721         spin_unlock_irqrestore(&bchan->vc.lock, flag);
 722
 723         return 0;
 724 }
 725
 726 /**
 727  * process_channel_irqs - processes the channel interrupts
 728  * @bdev: bam controller
 729  *
 730  * This function processes the channel interrupts
 731  *
 732  */
 733 static u32 process_channel_irqs(struct bam_device *bdev)
 734 {
 735         u32 i, srcs, pipe_stts;
 736         unsigned long flags;
 737         struct bam_async_desc *async_desc;
 738
 739         srcs = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_EE));
 740
 741         /* return early if no pipe/channel interrupts are present */
 742         if (!(srcs & P_IRQ))
 743                 return srcs;
 744
 745         for (i = 0; i < bdev->num_channels; i++) {
 746                 struct bam_chan *bchan = &bdev->channels[i];
 747
 748                 if (!(srcs & BIT(i)))
 749                         continue;
 750
 751                 /* clear pipe irq */
 752                 pipe_stts = readl_relaxed(bam_addr(bdev, i, BAM_P_IRQ_STTS));
 753
 754                 writel_relaxed(pipe_stts, bam_addr(bdev, i, BAM_P_IRQ_CLR));
 755
 756                 spin_lock_irqsave(&bchan->vc.lock, flags);
 757                 async_desc = bchan->curr_txd;
 758
 759                 if (async_desc) {
 760                         async_desc->num_desc -= async_desc->xfer_len;
 761                         async_desc->curr_desc += async_desc->xfer_len;
 762                         bchan->curr_txd = NULL;
 763
 764                         /* manage FIFO */
 765                         bchan->head += async_desc->xfer_len;
 766                         bchan->head %= MAX_DESCRIPTORS;
 767
 768                         /*
 769                          * if complete, process cookie.  Otherwise
 770                          * push back to front of desc_issued so that
 771                          * it gets restarted by the tasklet
 772                          */
 773                         if (!async_desc->num_desc)
 774                                 vchan_cookie_complete(&async_desc->vd);
 775                         else
 776                                 list_add(&async_desc->vd.node,
 777                                         &bchan->vc.desc_issued);
 778                 }
 779
 780                 spin_unlock_irqrestore(&bchan->vc.lock, flags);
 781         }
 782
 783         return srcs;
 784 }
 785
 786 /**
 787  * bam_dma_irq - irq handler for bam controller
 788  * @irq: IRQ of interrupt
 789  * @data: callback data
 790  *
 791  * IRQ handler for the bam controller
 792  */
 793 static irqreturn_t bam_dma_irq(int irq, void *data)
 794 {
 795         struct bam_device *bdev = data;
 796         u32 clr_mask = 0, srcs = 0;
 797
 798         srcs |= process_channel_irqs(bdev);
 799
 800         /* kick off tasklet to start next dma transfer */
 801         if (srcs & P_IRQ)
 802                 tasklet_schedule(&bdev->task);
 803
 804         if (srcs & BAM_IRQ)
 805                 clr_mask = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_STTS));
 806
 807         /* don't allow reorder of the various accesses to the BAM registers */
 808         mb();
 809
 810         writel_relaxed(clr_mask, bam_addr(bdev, 0, BAM_IRQ_CLR));
 811
 812         return IRQ_HANDLED;
 813 }
 814
 815 /**
 816  * bam_tx_status - returns status of transaction
 817  * @chan: dma channel
 818  * @cookie: transaction cookie
 819  * @txstate: DMA transaction state
 820  *
 821  * Return status of dma transaction
 822  */
 823 static enum dma_status bam_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
 824                 struct dma_tx_state *txstate)
 825 {
 826         struct bam_chan *bchan = to_bam_chan(chan);
 827         struct virt_dma_desc *vd;
 828         int ret;
 829         size_t residue = 0;
 830         unsigned int i;
 831         unsigned long flags;
 832
 833         ret = dma_cookie_status(chan, cookie, txstate);
 834         if (ret == DMA_COMPLETE)
 835                 return ret;
 836
 837         if (!txstate)
 838                 return bchan->paused ? DMA_PAUSED : ret;
 839
 840         spin_lock_irqsave(&bchan->vc.lock, flags);
 841         vd = vchan_find_desc(&bchan->vc, cookie);
 842         if (vd)
 843                 residue = container_of(vd, struct bam_async_desc, vd)->length;
 844         else if (bchan->curr_txd && bchan->curr_txd->vd.tx.cookie == cookie)
 845                 for (i = 0; i < bchan->curr_txd->num_desc; i++)
 846                         residue += bchan->curr_txd->curr_desc[i].size;
 847
 848         spin_unlock_irqrestore(&bchan->vc.lock, flags);
 849
 850         dma_set_residue(txstate, residue);
 851
 852         if (ret == DMA_IN_PROGRESS && bchan->paused)
 853                 ret = DMA_PAUSED;
 854
 855         return ret;
 856 }
 857
 858 /**
 859  * bam_apply_new_config
 860  * @bchan: bam dma channel
 861  * @dir: DMA direction
 862  */
 863 static void bam_apply_new_config(struct bam_chan *bchan,
 864         enum dma_transfer_direction dir)
 865 {
 866         struct bam_device *bdev = bchan->bdev;
 867         u32 maxburst;
 868
 869         if (dir == DMA_DEV_TO_MEM)
 870                 maxburst = bchan->slave.src_maxburst;
 871         else
 872                 maxburst = bchan->slave.dst_maxburst;
 873
 874         writel_relaxed(maxburst, bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD));
 875
 876         bchan->reconfigure = 0;
 877 }
 878
 879 /**
 880  * bam_start_dma - start next transaction
 881  * @bchan - bam dma channel
 882  */
 883 static void bam_start_dma(struct bam_chan *bchan)
 884 {
 885         struct virt_dma_desc *vd = vchan_next_desc(&bchan->vc);
 886         struct bam_device *bdev = bchan->bdev;
 887         struct bam_async_desc *async_desc;
 888         struct bam_desc_hw *desc;
 889         struct bam_desc_hw *fifo = PTR_ALIGN(bchan->fifo_virt,
 890                                         sizeof(struct bam_desc_hw));
 891
 892         lockdep_assert_held(&bchan->vc.lock);
 893
 894         if (!vd)
 895                 return;
 896
 897         list_del(&vd->node);
 898
 899         async_desc = container_of(vd, struct bam_async_desc, vd);
 900         bchan->curr_txd = async_desc;
 901
 902         /* on first use, initialize the channel hardware */
 903         if (!bchan->initialized)
 904                 bam_chan_init_hw(bchan, async_desc->dir);
 905
 906         /* apply new slave config changes, if necessary */
 907         if (bchan->reconfigure)
 908                 bam_apply_new_config(bchan, async_desc->dir);
 909
 910         desc = bchan->curr_txd->curr_desc;
 911
 912         if (async_desc->num_desc > MAX_DESCRIPTORS)
 913                 async_desc->xfer_len = MAX_DESCRIPTORS;
 914         else
 915                 async_desc->xfer_len = async_desc->num_desc;
 916
 917         /* set any special flags on the last descriptor */
 918         if (async_desc->num_desc == async_desc->xfer_len)
 919                 desc[async_desc->xfer_len - 1].flags =
 920                                         cpu_to_le16(async_desc->flags);
 921         else
 922                 desc[async_desc->xfer_len - 1].flags |=
 923                                         cpu_to_le16(DESC_FLAG_INT);
 924
 925         if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) {
 926                 u32 partial = MAX_DESCRIPTORS - bchan->tail;
 927
 928                 memcpy(&fifo[bchan->tail], desc,
 929                                 partial * sizeof(struct bam_desc_hw));
 930                 memcpy(fifo, &desc[partial], (async_desc->xfer_len - partial) *
 931                                 sizeof(struct bam_desc_hw));
 932         } else {
 933                 memcpy(&fifo[bchan->tail], desc,
 934                         async_desc->xfer_len * sizeof(struct bam_desc_hw));
 935         }
 936
 937         bchan->tail += async_desc->xfer_len;
 938         bchan->tail %= MAX_DESCRIPTORS;
 939
 940         /* ensure descriptor writes and dma start not reordered */
 941         wmb();
 942         writel_relaxed(bchan->tail * sizeof(struct bam_desc_hw),
 943                         bam_addr(bdev, bchan->id, BAM_P_EVNT_REG));
 944 }
 945
 946 /**
 947  * dma_tasklet - DMA IRQ tasklet
 948  * @data: tasklet argument (bam controller structure)
 949  *
 950  * Sets up next DMA operation and then processes all completed transactions
 951  */
 952 static void dma_tasklet(unsigned long data)
 953 {
 954         struct bam_device *bdev = (struct bam_device *)data;
 955         struct bam_chan *bchan;
 956         unsigned long flags;
 957         unsigned int i;
 958
 959         /* go through the channels and kick off transactions */
 960         for (i = 0; i < bdev->num_channels; i++) {
 961                 bchan = &bdev->channels[i];
 962                 spin_lock_irqsave(&bchan->vc.lock, flags);
 963
 964                 if (!list_empty(&bchan->vc.desc_issued) && !bchan->curr_txd)
 965                         bam_start_dma(bchan);
 966                 spin_unlock_irqrestore(&bchan->vc.lock, flags);
 967         }
 968 }
 969
 970 /**
 971  * bam_issue_pending - starts pending transactions
 972  * @chan: dma channel
 973  *
 974  * Calls tasklet directly which in turn starts any pending transactions
 975  */
 976 static void bam_issue_pending(struct dma_chan *chan)
 977 {
 978         struct bam_chan *bchan = to_bam_chan(chan);
 979         unsigned long flags;
 980
 981         spin_lock_irqsave(&bchan->vc.lock, flags);
 982
 983         /* if work pending and idle, start a transaction */
 984         if (vchan_issue_pending(&bchan->vc) && !bchan->curr_txd)
 985                 bam_start_dma(bchan);
 986
 987         spin_unlock_irqrestore(&bchan->vc.lock, flags);
 988 }
 989
 990 /**
 991  * bam_dma_free_desc - free descriptor memory
 992  * @vd: virtual descriptor
 993  *
 994  */
 995 static void bam_dma_free_desc(struct virt_dma_desc *vd)
 996 {
 997         struct bam_async_desc *async_desc = container_of(vd,
 998                         struct bam_async_desc, vd);
 999
1000         kfree(async_desc);
1001 }
1002
1003 static struct dma_chan *bam_dma_xlate(struct of_phandle_args *dma_spec,
1004                 struct of_dma *of)
1005 {
1006         struct bam_device *bdev = container_of(of->of_dma_data,
1007                                         struct bam_device, common);
1008         unsigned int request;
1009
1010         if (dma_spec->args_count != 1)
1011                 return NULL;
1012
1013         request = dma_spec->args[0];
1014         if (request >= bdev->num_channels)
1015                 return NULL;
1016
1017         return dma_get_slave_channel(&(bdev->channels[request].vc.chan));
1018 }
1019
1020 /**
1021  * bam_init
1022  * @bdev: bam device
1023  *
1024  * Initialization helper for global bam registers
1025  */
1026 static int bam_init(struct bam_device *bdev)
1027 {
1028         u32 val;
1029
1030         /* read revision and configuration information */
1031         val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION)) >> NUM_EES_SHIFT;
1032         val &= NUM_EES_MASK;
1033
1034         /* check that configured EE is within range */
1035         if (bdev->ee >= val)
1036                 return -EINVAL;
1037
1038         val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES));
1039         bdev->num_channels = val & BAM_NUM_PIPES_MASK;
1040
1041         /* s/w reset bam */
1042         /* after reset all pipes are disabled and idle */
1043         val = readl_relaxed(bam_addr(bdev, 0, BAM_CTRL));
1044         val |= BAM_SW_RST;
1045         writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL));
1046         val &= ~BAM_SW_RST;
1047         writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL));
1048
1049         /* make sure previous stores are visible before enabling BAM */
1050         wmb();
1051
1052         /* enable bam */
1053         val |= BAM_EN;
1054         writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL));
1055
1056         /* set descriptor threshhold, start with 4 bytes */
1057         writel_relaxed(DEFAULT_CNT_THRSHLD,
1058                         bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD));
1059
1060         /* Enable default set of h/w workarounds, ie all except BAM_FULL_PIPE */
1061         writel_relaxed(BAM_CNFG_BITS_DEFAULT, bam_addr(bdev, 0, BAM_CNFG_BITS));
1062
1063         /* enable irqs for errors */
1064         writel_relaxed(BAM_ERROR_EN | BAM_HRESP_ERR_EN,
1065                         bam_addr(bdev, 0, BAM_IRQ_EN));
1066
1067         /* unmask global bam interrupt */
1068         writel_relaxed(BAM_IRQ_MSK, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE));
1069
1070         return 0;
1071 }
1072
1073 static void bam_channel_init(struct bam_device *bdev, struct bam_chan *bchan,
1074         u32 index)
1075 {
1076         bchan->id = index;
1077         bchan->bdev = bdev;
1078
1079         vchan_init(&bchan->vc, &bdev->common);
1080         bchan->vc.desc_free = bam_dma_free_desc;
1081 }
1082
1083 static const struct of_device_id bam_of_match[] = {
1084         { .compatible = "qcom,bam-v1.3.0", .data = &bam_v1_3_reg_info },
1085         { .compatible = "qcom,bam-v1.4.0", .data = &bam_v1_4_reg_info },
1086         { .compatible = "qcom,bam-v1.7.0", .data = &bam_v1_7_reg_info },
1087         {}
1088 };
1089
1090 MODULE_DEVICE_TABLE(of, bam_of_match);
1091
1092 static int bam_dma_probe(struct platform_device *pdev)
1093 {
1094         struct bam_device *bdev;
1095         const struct of_device_id *match;
1096         struct resource *iores;
1097         int ret, i;
1098
1099         bdev = devm_kzalloc(&pdev->dev, sizeof(*bdev), GFP_KERNEL);
1100         if (!bdev)
1101                 return -ENOMEM;
1102
1103         bdev->dev = &pdev->dev;
1104
1105         match = of_match_node(bam_of_match, pdev->dev.of_node);
1106         if (!match) {
1107                 dev_err(&pdev->dev, "Unsupported BAM module\n");
1108                 return -ENODEV;
1109         }
1110
1111         bdev->layout = match->data;
1112
1113         iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1114         bdev->regs = devm_ioremap_resource(&pdev->dev, iores);
1115         if (IS_ERR(bdev->regs))
1116                 return PTR_ERR(bdev->regs);
1117
1118         bdev->irq = platform_get_irq(pdev, 0);
1119         if (bdev->irq < 0)
1120                 return bdev->irq;
1121
1122         ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &bdev->ee);
1123         if (ret) {
1124                 dev_err(bdev->dev, "Execution environment unspecified\n");
1125                 return ret;
1126         }
1127
1128         bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk");
1129         if (IS_ERR(bdev->bamclk))
1130                 return PTR_ERR(bdev->bamclk);
1131
1132         ret = clk_prepare_enable(bdev->bamclk);
1133         if (ret) {
1134                 dev_err(bdev->dev, "failed to prepare/enable clock\n");
1135                 return ret;
1136         }
1137
1138         ret = bam_init(bdev);
1139         if (ret)
1140                 goto err_disable_clk;
1141
1142         tasklet_init(&bdev->task, dma_tasklet, (unsigned long)bdev);
1143
1144         bdev->channels = devm_kcalloc(bdev->dev, bdev->num_channels,
1145                                 sizeof(*bdev->channels), GFP_KERNEL);
1146
1147         if (!bdev->channels) {
1148                 ret = -ENOMEM;
1149                 goto err_tasklet_kill;
1150         }
1151
1152         /* allocate and initialize channels */
1153         INIT_LIST_HEAD(&bdev->common.channels);
1154
1155         for (i = 0; i < bdev->num_channels; i++)
1156                 bam_channel_init(bdev, &bdev->channels[i], i);
1157
1158         ret = devm_request_irq(bdev->dev, bdev->irq, bam_dma_irq,
1159                         IRQF_TRIGGER_HIGH, "bam_dma", bdev);
1160         if (ret)
1161                 goto err_bam_channel_exit;
1162
1163         /* set max dma segment size */
1164         bdev->common.dev = bdev->dev;
1165         bdev->common.dev->dma_parms = &bdev->dma_parms;
1166         ret = dma_set_max_seg_size(bdev->common.dev, BAM_MAX_DATA_SIZE);
1167         if (ret) {
1168                 dev_err(bdev->dev, "cannot set maximum segment size\n");
1169                 goto err_bam_channel_exit;
1170         }
1171
1172         platform_set_drvdata(pdev, bdev);
1173
1174         /* set capabilities */
1175         dma_cap_zero(bdev->common.cap_mask);
1176         dma_cap_set(DMA_SLAVE, bdev->common.cap_mask);
1177
1178         /* initialize dmaengine apis */
1179         bdev->common.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
1180         bdev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
1181         bdev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
1182         bdev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
1183         bdev->common.device_alloc_chan_resources = bam_alloc_chan;
1184         bdev->common.device_free_chan_resources = bam_free_chan;
1185         bdev->common.device_prep_slave_sg = bam_prep_slave_sg;
1186         bdev->common.device_config = bam_slave_config;
1187         bdev->common.device_pause = bam_pause;
1188         bdev->common.device_resume = bam_resume;
1189         bdev->common.device_terminate_all = bam_dma_terminate_all;
1190         bdev->common.device_issue_pending = bam_issue_pending;
1191         bdev->common.device_tx_status = bam_tx_status;
1192         bdev->common.dev = bdev->dev;
1193
1194         ret = dma_async_device_register(&bdev->common);
1195         if (ret) {
1196                 dev_err(bdev->dev, "failed to register dma async device\n");
1197                 goto err_bam_channel_exit;
1198         }
1199
1200         ret = of_dma_controller_register(pdev->dev.of_node, bam_dma_xlate,
1201                                         &bdev->common);
1202         if (ret)
1203                 goto err_unregister_dma;
1204
1205         return 0;
1206
1207 err_unregister_dma:
1208         dma_async_device_unregister(&bdev->common);
1209 err_bam_channel_exit:
1210         for (i = 0; i < bdev->num_channels; i++)
1211                 tasklet_kill(&bdev->channels[i].vc.task);
1212 err_tasklet_kill:
1213         tasklet_kill(&bdev->task);
1214 err_disable_clk:
1215         clk_disable_unprepare(bdev->bamclk);
1216
1217         return ret;
1218 }
1219
1220 static int bam_dma_remove(struct platform_device *pdev)
1221 {
1222         struct bam_device *bdev = platform_get_drvdata(pdev);
1223         u32 i;
1224
1225         of_dma_controller_free(pdev->dev.of_node);
1226         dma_async_device_unregister(&bdev->common);
1227
1228         /* mask all interrupts for this execution environment */
1229         writel_relaxed(0, bam_addr(bdev, 0,  BAM_IRQ_SRCS_MSK_EE));
1230
1231         devm_free_irq(bdev->dev, bdev->irq, bdev);
1232
1233         for (i = 0; i < bdev->num_channels; i++) {
1234                 bam_dma_terminate_all(&bdev->channels[i].vc.chan);
1235                 tasklet_kill(&bdev->channels[i].vc.task);
1236
1237                 dma_free_wc(bdev->dev, BAM_DESC_FIFO_SIZE,
1238                             bdev->channels[i].fifo_virt,
1239                             bdev->channels[i].fifo_phys);
1240         }
1241
1242         tasklet_kill(&bdev->task);
1243
1244         clk_disable_unprepare(bdev->bamclk);
1245
1246         return 0;
1247 }
1248
1249 static struct platform_driver bam_dma_driver = {
1250         .probe = bam_dma_probe,
1251         .remove = bam_dma_remove,
1252         .driver = {
1253                 .name = "bam-dma-engine",
1254                 .of_match_table = bam_of_match,
1255         },
1256 };
1257
1258 module_platform_driver(bam_dma_driver);
1259
1260 MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
1261 MODULE_DESCRIPTION("QCOM BAM DMA engine driver");
1262 MODULE_LICENSE("GPL v2");