Merge branch 'parisc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
[cascardo/linux.git] / drivers / gpio / gpio-xilinx.c
1 /*
2  * Xilinx gpio driver for xps/axi_gpio IP.
3  *
4  * Copyright 2008 - 2013 Xilinx, Inc.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2
8  * as published by the Free Software Foundation.
9  *
10  * You should have received a copy of the GNU General Public License
11  * along with this program; if not, write to the Free Software
12  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
13  */
14
15 #include <linux/bitops.h>
16 #include <linux/init.h>
17 #include <linux/errno.h>
18 #include <linux/module.h>
19 #include <linux/of_device.h>
20 #include <linux/of_platform.h>
21 #include <linux/of_gpio.h>
22 #include <linux/io.h>
23 #include <linux/gpio.h>
24 #include <linux/slab.h>
25
26 /* Register Offset Definitions */
27 #define XGPIO_DATA_OFFSET   (0x0)       /* Data register  */
28 #define XGPIO_TRI_OFFSET    (0x4)       /* I/O direction register  */
29
30 #define XGPIO_CHANNEL_OFFSET    0x8
31
32 /* Read/Write access to the GPIO registers */
33 #if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_X86)
34 # define xgpio_readreg(offset)          readl(offset)
35 # define xgpio_writereg(offset, val)    writel(val, offset)
36 #else
37 # define xgpio_readreg(offset)          __raw_readl(offset)
38 # define xgpio_writereg(offset, val)    __raw_writel(val, offset)
39 #endif
40
41 /**
42  * struct xgpio_instance - Stores information about GPIO device
43  * @mmchip: OF GPIO chip for memory mapped banks
44  * @gpio_width: GPIO width for every channel
45  * @gpio_state: GPIO state shadow register
46  * @gpio_dir: GPIO direction shadow register
47  * @gpio_lock: Lock used for synchronization
48  */
49 struct xgpio_instance {
50         struct of_mm_gpio_chip mmchip;
51         unsigned int gpio_width[2];
52         u32 gpio_state[2];
53         u32 gpio_dir[2];
54         spinlock_t gpio_lock[2];
55 };
56
57 static inline int xgpio_index(struct xgpio_instance *chip, int gpio)
58 {
59         if (gpio >= chip->gpio_width[0])
60                 return 1;
61
62         return 0;
63 }
64
65 static inline int xgpio_regoffset(struct xgpio_instance *chip, int gpio)
66 {
67         if (xgpio_index(chip, gpio))
68                 return XGPIO_CHANNEL_OFFSET;
69
70         return 0;
71 }
72
73 static inline int xgpio_offset(struct xgpio_instance *chip, int gpio)
74 {
75         if (xgpio_index(chip, gpio))
76                 return gpio - chip->gpio_width[0];
77
78         return gpio;
79 }
80
81 /**
82  * xgpio_get - Read the specified signal of the GPIO device.
83  * @gc:     Pointer to gpio_chip device structure.
84  * @gpio:   GPIO signal number.
85  *
86  * This function reads the specified signal of the GPIO device.
87  *
88  * Return:
89  * 0 if direction of GPIO signals is set as input otherwise it
90  * returns negative error value.
91  */
92 static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
93 {
94         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
95         struct xgpio_instance *chip = gpiochip_get_data(gc);
96         u32 val;
97
98         val = xgpio_readreg(mm_gc->regs + XGPIO_DATA_OFFSET +
99                             xgpio_regoffset(chip, gpio));
100
101         return !!(val & BIT(xgpio_offset(chip, gpio)));
102 }
103
104 /**
105  * xgpio_set - Write the specified signal of the GPIO device.
106  * @gc:     Pointer to gpio_chip device structure.
107  * @gpio:   GPIO signal number.
108  * @val:    Value to be written to specified signal.
109  *
110  * This function writes the specified value in to the specified signal of the
111  * GPIO device.
112  */
113 static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
114 {
115         unsigned long flags;
116         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
117         struct xgpio_instance *chip = gpiochip_get_data(gc);
118         int index =  xgpio_index(chip, gpio);
119         int offset =  xgpio_offset(chip, gpio);
120
121         spin_lock_irqsave(&chip->gpio_lock[index], flags);
122
123         /* Write to GPIO signal and set its direction to output */
124         if (val)
125                 chip->gpio_state[index] |= BIT(offset);
126         else
127                 chip->gpio_state[index] &= ~BIT(offset);
128
129         xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
130                        xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
131
132         spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
133 }
134
135 /**
136  * xgpio_set_multiple - Write the specified signals of the GPIO device.
137  * @gc:     Pointer to gpio_chip device structure.
138  * @mask:   Mask of the GPIOS to modify.
139  * @bits:   Value to be wrote on each GPIO
140  *
141  * This function writes the specified values into the specified signals of the
142  * GPIO devices.
143  */
144 static void xgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
145                                unsigned long *bits)
146 {
147         unsigned long flags;
148         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
149         struct xgpio_instance *chip = gpiochip_get_data(gc);
150         int index = xgpio_index(chip, 0);
151         int offset, i;
152
153         spin_lock_irqsave(&chip->gpio_lock[index], flags);
154
155         /* Write to GPIO signals */
156         for (i = 0; i < gc->ngpio; i++) {
157                 if (*mask == 0)
158                         break;
159                 if (index !=  xgpio_index(chip, i)) {
160                         xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
161                                        xgpio_regoffset(chip, i),
162                                        chip->gpio_state[index]);
163                         spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
164                         index =  xgpio_index(chip, i);
165                         spin_lock_irqsave(&chip->gpio_lock[index], flags);
166                 }
167                 if (__test_and_clear_bit(i, mask)) {
168                         offset =  xgpio_offset(chip, i);
169                         if (test_bit(i, bits))
170                                 chip->gpio_state[index] |= BIT(offset);
171                         else
172                                 chip->gpio_state[index] &= ~BIT(offset);
173                 }
174         }
175
176         xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
177                        xgpio_regoffset(chip, i), chip->gpio_state[index]);
178
179         spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
180 }
181
182 /**
183  * xgpio_dir_in - Set the direction of the specified GPIO signal as input.
184  * @gc:     Pointer to gpio_chip device structure.
185  * @gpio:   GPIO signal number.
186  *
187  * Return:
188  * 0 - if direction of GPIO signals is set as input
189  * otherwise it returns negative error value.
190  */
191 static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
192 {
193         unsigned long flags;
194         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
195         struct xgpio_instance *chip = gpiochip_get_data(gc);
196         int index =  xgpio_index(chip, gpio);
197         int offset =  xgpio_offset(chip, gpio);
198
199         spin_lock_irqsave(&chip->gpio_lock[index], flags);
200
201         /* Set the GPIO bit in shadow register and set direction as input */
202         chip->gpio_dir[index] |= BIT(offset);
203         xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET +
204                        xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
205
206         spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
207
208         return 0;
209 }
210
211 /**
212  * xgpio_dir_out - Set the direction of the specified GPIO signal as output.
213  * @gc:     Pointer to gpio_chip device structure.
214  * @gpio:   GPIO signal number.
215  * @val:    Value to be written to specified signal.
216  *
217  * This function sets the direction of specified GPIO signal as output.
218  *
219  * Return:
220  * If all GPIO signals of GPIO chip is configured as input then it returns
221  * error otherwise it returns 0.
222  */
223 static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
224 {
225         unsigned long flags;
226         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
227         struct xgpio_instance *chip = gpiochip_get_data(gc);
228         int index =  xgpio_index(chip, gpio);
229         int offset =  xgpio_offset(chip, gpio);
230
231         spin_lock_irqsave(&chip->gpio_lock[index], flags);
232
233         /* Write state of GPIO signal */
234         if (val)
235                 chip->gpio_state[index] |= BIT(offset);
236         else
237                 chip->gpio_state[index] &= ~BIT(offset);
238         xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
239                         xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
240
241         /* Clear the GPIO bit in shadow register and set direction as output */
242         chip->gpio_dir[index] &= ~BIT(offset);
243         xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET +
244                         xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
245
246         spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
247
248         return 0;
249 }
250
251 /**
252  * xgpio_save_regs - Set initial values of GPIO pins
253  * @mm_gc: Pointer to memory mapped GPIO chip structure
254  */
255 static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
256 {
257         struct xgpio_instance *chip =
258                 container_of(mm_gc, struct xgpio_instance, mmchip);
259
260         xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state[0]);
261         xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir[0]);
262
263         if (!chip->gpio_width[1])
264                 return;
265
266         xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + XGPIO_CHANNEL_OFFSET,
267                        chip->gpio_state[1]);
268         xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + XGPIO_CHANNEL_OFFSET,
269                        chip->gpio_dir[1]);
270 }
271
272 /**
273  * xgpio_remove - Remove method for the GPIO device.
274  * @pdev: pointer to the platform device
275  *
276  * This function remove gpiochips and frees all the allocated resources.
277  *
278  * Return: 0 always
279  */
280 static int xgpio_remove(struct platform_device *pdev)
281 {
282         struct xgpio_instance *chip = platform_get_drvdata(pdev);
283
284         of_mm_gpiochip_remove(&chip->mmchip);
285
286         return 0;
287 }
288
289 /**
290  * xgpio_of_probe - Probe method for the GPIO device.
291  * @pdev: pointer to the platform device
292  *
293  * Return:
294  * It returns 0, if the driver is bound to the GPIO device, or
295  * a negative value if there is an error.
296  */
297 static int xgpio_probe(struct platform_device *pdev)
298 {
299         struct xgpio_instance *chip;
300         int status = 0;
301         struct device_node *np = pdev->dev.of_node;
302         u32 is_dual;
303
304         chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
305         if (!chip)
306                 return -ENOMEM;
307
308         platform_set_drvdata(pdev, chip);
309
310         /* Update GPIO state shadow register with default value */
311         of_property_read_u32(np, "xlnx,dout-default", &chip->gpio_state[0]);
312
313         /* Update GPIO direction shadow register with default value */
314         if (of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir[0]))
315                 chip->gpio_dir[0] = 0xFFFFFFFF;
316
317         /*
318          * Check device node and parent device node for device width
319          * and assume default width of 32
320          */
321         if (of_property_read_u32(np, "xlnx,gpio-width", &chip->gpio_width[0]))
322                 chip->gpio_width[0] = 32;
323
324         spin_lock_init(&chip->gpio_lock[0]);
325
326         if (of_property_read_u32(np, "xlnx,is-dual", &is_dual))
327                 is_dual = 0;
328
329         if (is_dual) {
330                 /* Update GPIO state shadow register with default value */
331                 of_property_read_u32(np, "xlnx,dout-default-2",
332                                      &chip->gpio_state[1]);
333
334                 /* Update GPIO direction shadow register with default value */
335                 if (of_property_read_u32(np, "xlnx,tri-default-2",
336                                          &chip->gpio_dir[1]))
337                         chip->gpio_dir[1] = 0xFFFFFFFF;
338
339                 /*
340                  * Check device node and parent device node for device width
341                  * and assume default width of 32
342                  */
343                 if (of_property_read_u32(np, "xlnx,gpio2-width",
344                                          &chip->gpio_width[1]))
345                         chip->gpio_width[1] = 32;
346
347                 spin_lock_init(&chip->gpio_lock[1]);
348         }
349
350         chip->mmchip.gc.ngpio = chip->gpio_width[0] + chip->gpio_width[1];
351         chip->mmchip.gc.parent = &pdev->dev;
352         chip->mmchip.gc.direction_input = xgpio_dir_in;
353         chip->mmchip.gc.direction_output = xgpio_dir_out;
354         chip->mmchip.gc.get = xgpio_get;
355         chip->mmchip.gc.set = xgpio_set;
356         chip->mmchip.gc.set_multiple = xgpio_set_multiple;
357
358         chip->mmchip.save_regs = xgpio_save_regs;
359
360         /* Call the OF gpio helper to setup and register the GPIO device */
361         status = of_mm_gpiochip_add_data(np, &chip->mmchip, chip);
362         if (status) {
363                 pr_err("%s: error in probe function with status %d\n",
364                        np->full_name, status);
365                 return status;
366         }
367
368         return 0;
369 }
370
371 static const struct of_device_id xgpio_of_match[] = {
372         { .compatible = "xlnx,xps-gpio-1.00.a", },
373         { /* end of list */ },
374 };
375
376 MODULE_DEVICE_TABLE(of, xgpio_of_match);
377
378 static struct platform_driver xgpio_plat_driver = {
379         .probe          = xgpio_probe,
380         .remove         = xgpio_remove,
381         .driver         = {
382                         .name = "gpio-xilinx",
383                         .of_match_table = xgpio_of_match,
384         },
385 };
386
387 static int __init xgpio_init(void)
388 {
389         return platform_driver_register(&xgpio_plat_driver);
390 }
391
392 subsys_initcall(xgpio_init);
393
394 static void __exit xgpio_exit(void)
395 {
396         platform_driver_unregister(&xgpio_plat_driver);
397 }
398 module_exit(xgpio_exit);
399
400 MODULE_AUTHOR("Xilinx, Inc.");
401 MODULE_DESCRIPTION("Xilinx GPIO driver");
402 MODULE_LICENSE("GPL");