drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c

   1 /******************************************************************************
   2  *
   3  * COPYRIGHT © 2014-2015 VMware, Inc., Palo Alto, CA., USA
   4  * All Rights Reserved.
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a
   7  * copy of this software and associated documentation files (the
   8  * "Software"), to deal in the Software without restriction, including
   9  * without limitation the rights to use, copy, modify, merge, publish,
  10  * distribute, sub license, and/or sell copies of the Software, and to
  11  * permit persons to whom the Software is furnished to do so, subject to
  12  * the following conditions:
  13  *
  14  * The above copyright notice and this permission notice (including the
  15  * next paragraph) shall be included in all copies or substantial portions
  16  * of the Software.
  17  *
  18  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  19  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  20  * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
  21  * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
  22  * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
  23  * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
  24  * USE OR OTHER DEALINGS IN THE SOFTWARE.
  25  *
  26  ******************************************************************************/
  27
  28 #include "vmwgfx_kms.h"
  29 #include "device_include/svga3d_surfacedefs.h"
  30 #include <drm/drm_plane_helper.h>
  31
  32 #define vmw_crtc_to_stdu(x) \
  33         container_of(x, struct vmw_screen_target_display_unit, base.crtc)
  34 #define vmw_encoder_to_stdu(x) \
  35         container_of(x, struct vmw_screen_target_display_unit, base.encoder)
  36 #define vmw_connector_to_stdu(x) \
  37         container_of(x, struct vmw_screen_target_display_unit, base.connector)
  38
  39
  40
  41 enum stdu_content_type {
  42         SAME_AS_DISPLAY = 0,
  43         SEPARATE_SURFACE,
  44         SEPARATE_DMA
  45 };
  46
  47 /**
  48  * struct vmw_stdu_dirty - closure structure for the update functions
  49  *
  50  * @base: The base type we derive from. Used by vmw_kms_helper_dirty().
  51  * @transfer: Transfer direction for DMA command.
  52  * @left: Left side of bounding box.
  53  * @right: Right side of bounding box.
  54  * @top: Top side of bounding box.
  55  * @bottom: Bottom side of bounding box.
  56  * @buf: DMA buffer when DMA-ing between buffer and screen targets.
  57  * @sid: Surface ID when copying between surface and screen targets.
  58  */
  59 struct vmw_stdu_dirty {
  60         struct vmw_kms_dirty base;
  61         SVGA3dTransferType  transfer;
  62         s32 left, right, top, bottom;
  63         u32 pitch;
  64         union {
  65                 struct vmw_dma_buffer *buf;
  66                 u32 sid;
  67         };
  68 };
  69
  70 /*
  71  * SVGA commands that are used by this code. Please see the device headers
  72  * for explanation.
  73  */
  74 struct vmw_stdu_update {
  75         SVGA3dCmdHeader header;
  76         SVGA3dCmdUpdateGBScreenTarget body;
  77 };
  78
  79 struct vmw_stdu_dma {
  80         SVGA3dCmdHeader     header;
  81         SVGA3dCmdSurfaceDMA body;
  82 };
  83
  84 struct vmw_stdu_surface_copy {
  85         SVGA3dCmdHeader      header;
  86         SVGA3dCmdSurfaceCopy body;
  87 };
  88
  89
  90 /**
  91  * struct vmw_screen_target_display_unit
  92  *
  93  * @base: VMW specific DU structure
  94  * @display_srf: surface to be displayed.  The dimension of this will always
  95  *               match the display mode.  If the display mode matches
  96  *               content_vfbs dimensions, then this is a pointer into the
  97  *               corresponding field in content_vfbs.  If not, then this
  98  *               is a separate buffer to which content_vfbs will blit to.
  99  * @content_type:  content_fb type
 100  * @defined:  true if the current display unit has been initialized
 101  */
 102 struct vmw_screen_target_display_unit {
 103         struct vmw_display_unit base;
 104
 105         struct vmw_surface     *display_srf;
 106         enum stdu_content_type content_fb_type;
 107
 108         bool defined;
 109 };
 110
 111
 112
 113 static void vmw_stdu_destroy(struct vmw_screen_target_display_unit *stdu);
 114
 115
 116
 117 /******************************************************************************
 118  * Screen Target Display Unit helper Functions
 119  *****************************************************************************/
 120
 121 /**
 122  * vmw_stdu_unpin_display - unpins the resource associated with display surface
 123  *
 124  * @stdu: contains the display surface
 125  *
 126  * If the display surface was privatedly allocated by
 127  * vmw_surface_gb_priv_define() and not registered as a framebuffer, then it
 128  * won't be automatically cleaned up when all the framebuffers are freed.  As
 129  * such, we have to explicitly call vmw_resource_unreference() to get it freed.
 130  */
 131 static void vmw_stdu_unpin_display(struct vmw_screen_target_display_unit *stdu)
 132 {
 133         if (stdu->display_srf) {
 134                 struct vmw_resource *res = &stdu->display_srf->res;
 135
 136                 vmw_resource_unpin(res);
 137                 vmw_surface_unreference(&stdu->display_srf);
 138         }
 139 }
 140
 141
 142
 143 /******************************************************************************
 144  * Screen Target Display Unit CRTC Functions
 145  *****************************************************************************/
 146
 147
 148 /**
 149  * vmw_stdu_crtc_destroy - cleans up the STDU
 150  *
 151  * @crtc: used to get a reference to the containing STDU
 152  */
 153 static void vmw_stdu_crtc_destroy(struct drm_crtc *crtc)
 154 {
 155         vmw_stdu_destroy(vmw_crtc_to_stdu(crtc));
 156 }
 157
 158 /**
 159  * vmw_stdu_define_st - Defines a Screen Target
 160  *
 161  * @dev_priv:  VMW DRM device
 162  * @stdu: display unit to create a Screen Target for
 163  * @mode: The mode to set.
 164  * @crtc_x: X coordinate of screen target relative to framebuffer origin.
 165  * @crtc_y: Y coordinate of screen target relative to framebuffer origin.
 166  *
 167  * Creates a STDU that we can used later.  This function is called whenever the
 168  * framebuffer size changes.
 169  *
 170  * RETURNs:
 171  * 0 on success, error code on failure
 172  */
 173 static int vmw_stdu_define_st(struct vmw_private *dev_priv,
 174                               struct vmw_screen_target_display_unit *stdu,
 175                               struct drm_display_mode *mode,
 176                               int crtc_x, int crtc_y)
 177 {
 178         struct {
 179                 SVGA3dCmdHeader header;
 180                 SVGA3dCmdDefineGBScreenTarget body;
 181         } *cmd;
 182
 183         cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
 184
 185         if (unlikely(cmd == NULL)) {
 186                 DRM_ERROR("Out of FIFO space defining Screen Target\n");
 187                 return -ENOMEM;
 188         }
 189
 190         cmd->header.id   = SVGA_3D_CMD_DEFINE_GB_SCREENTARGET;
 191         cmd->header.size = sizeof(cmd->body);
 192
 193         cmd->body.stid   = stdu->base.unit;
 194         cmd->body.width  = mode->hdisplay;
 195         cmd->body.height = mode->vdisplay;
 196         cmd->body.flags  = (0 == cmd->body.stid) ? SVGA_STFLAG_PRIMARY : 0;
 197         cmd->body.dpi    = 0;
 198         if (stdu->base.is_implicit) {
 199                 cmd->body.xRoot  = crtc_x;
 200                 cmd->body.yRoot  = crtc_y;
 201         } else {
 202                 cmd->body.xRoot  = stdu->base.gui_x;
 203                 cmd->body.yRoot  = stdu->base.gui_y;
 204         }
 205         stdu->base.set_gui_x = cmd->body.xRoot;
 206         stdu->base.set_gui_y = cmd->body.yRoot;
 207
 208         vmw_fifo_commit(dev_priv, sizeof(*cmd));
 209
 210         stdu->defined = true;
 211
 212         return 0;
 213 }
 214
 215
 216
 217 /**
 218  * vmw_stdu_bind_st - Binds a surface to a Screen Target
 219  *
 220  * @dev_priv: VMW DRM device
 221  * @stdu: display unit affected
 222  * @res: Buffer to bind to the screen target.  Set to NULL to blank screen.
 223  *
 224  * Binding a surface to a Screen Target the same as flipping
 225  */
 226 static int vmw_stdu_bind_st(struct vmw_private *dev_priv,
 227                             struct vmw_screen_target_display_unit *stdu,
 228                             struct vmw_resource *res)
 229 {
 230         SVGA3dSurfaceImageId image;
 231
 232         struct {
 233                 SVGA3dCmdHeader header;
 234                 SVGA3dCmdBindGBScreenTarget body;
 235         } *cmd;
 236
 237
 238         if (!stdu->defined) {
 239                 DRM_ERROR("No screen target defined\n");
 240                 return -EINVAL;
 241         }
 242
 243         /* Set up image using information in vfb */
 244         memset(&image, 0, sizeof(image));
 245         image.sid = res ? res->id : SVGA3D_INVALID_ID;
 246
 247         cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
 248
 249         if (unlikely(cmd == NULL)) {
 250                 DRM_ERROR("Out of FIFO space binding a screen target\n");
 251                 return -ENOMEM;
 252         }
 253
 254         cmd->header.id   = SVGA_3D_CMD_BIND_GB_SCREENTARGET;
 255         cmd->header.size = sizeof(cmd->body);
 256
 257         cmd->body.stid   = stdu->base.unit;
 258         cmd->body.image  = image;
 259
 260         vmw_fifo_commit(dev_priv, sizeof(*cmd));
 261
 262         return 0;
 263 }
 264
 265 /**
 266  * vmw_stdu_populate_update - populate an UPDATE_GB_SCREENTARGET command with a
 267  * bounding box.
 268  *
 269  * @cmd: Pointer to command stream.
 270  * @unit: Screen target unit.
 271  * @left: Left side of bounding box.
 272  * @right: Right side of bounding box.
 273  * @top: Top side of bounding box.
 274  * @bottom: Bottom side of bounding box.
 275  */
 276 static void vmw_stdu_populate_update(void *cmd, int unit,
 277                                      s32 left, s32 right, s32 top, s32 bottom)
 278 {
 279         struct vmw_stdu_update *update = cmd;
 280
 281         update->header.id   = SVGA_3D_CMD_UPDATE_GB_SCREENTARGET;
 282         update->header.size = sizeof(update->body);
 283
 284         update->body.stid   = unit;
 285         update->body.rect.x = left;
 286         update->body.rect.y = top;
 287         update->body.rect.w = right - left;
 288         update->body.rect.h = bottom - top;
 289 }
 290
 291 /**
 292  * vmw_stdu_update_st - Full update of a Screen Target
 293  *
 294  * @dev_priv: VMW DRM device
 295  * @stdu: display unit affected
 296  *
 297  * This function needs to be called whenever the content of a screen
 298  * target has changed completely. Typically as a result of a backing
 299  * surface change.
 300  *
 301  * RETURNS:
 302  * 0 on success, error code on failure
 303  */
 304 static int vmw_stdu_update_st(struct vmw_private *dev_priv,
 305                               struct vmw_screen_target_display_unit *stdu)
 306 {
 307         struct vmw_stdu_update *cmd;
 308         struct drm_crtc *crtc = &stdu->base.crtc;
 309
 310         if (!stdu->defined) {
 311                 DRM_ERROR("No screen target defined");
 312                 return -EINVAL;
 313         }
 314
 315         cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
 316
 317         if (unlikely(cmd == NULL)) {
 318                 DRM_ERROR("Out of FIFO space updating a Screen Target\n");
 319                 return -ENOMEM;
 320         }
 321
 322         vmw_stdu_populate_update(cmd, stdu->base.unit, 0, crtc->mode.hdisplay,
 323                                  0, crtc->mode.vdisplay);
 324
 325         vmw_fifo_commit(dev_priv, sizeof(*cmd));
 326
 327         return 0;
 328 }
 329
 330
 331
 332 /**
 333  * vmw_stdu_destroy_st - Destroy a Screen Target
 334  *
 335  * @dev_priv:  VMW DRM device
 336  * @stdu: display unit to destroy
 337  */
 338 static int vmw_stdu_destroy_st(struct vmw_private *dev_priv,
 339                                struct vmw_screen_target_display_unit *stdu)
 340 {
 341         int    ret;
 342
 343         struct {
 344                 SVGA3dCmdHeader header;
 345                 SVGA3dCmdDestroyGBScreenTarget body;
 346         } *cmd;
 347
 348
 349         /* Nothing to do if not successfully defined */
 350         if (unlikely(!stdu->defined))
 351                 return 0;
 352
 353         cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
 354
 355         if (unlikely(cmd == NULL)) {
 356                 DRM_ERROR("Out of FIFO space, screen target not destroyed\n");
 357                 return -ENOMEM;
 358         }
 359
 360         cmd->header.id   = SVGA_3D_CMD_DESTROY_GB_SCREENTARGET;
 361         cmd->header.size = sizeof(cmd->body);
 362
 363         cmd->body.stid   = stdu->base.unit;
 364
 365         vmw_fifo_commit(dev_priv, sizeof(*cmd));
 366
 367         /* Force sync */
 368         ret = vmw_fallback_wait(dev_priv, false, true, 0, false, 3*HZ);
 369         if (unlikely(ret != 0))
 370                 DRM_ERROR("Failed to sync with HW");
 371
 372         stdu->defined = false;
 373
 374         return ret;
 375 }
 376
 377 /**
 378  * vmw_stdu_bind_fb - Bind an fb to a defined screen target
 379  *
 380  * @dev_priv: Pointer to a device private struct.
 381  * @crtc: The crtc holding the screen target.
 382  * @mode: The mode currently used by the screen target. Must be non-NULL.
 383  * @new_fb: The new framebuffer to bind. Must be non-NULL.
 384  *
 385  * RETURNS:
 386  * 0 on success, error code on failure.
 387  */
 388 static int vmw_stdu_bind_fb(struct vmw_private *dev_priv,
 389                             struct drm_crtc *crtc,
 390                             struct drm_display_mode *mode,
 391                             struct drm_framebuffer *new_fb)
 392 {
 393         struct vmw_screen_target_display_unit *stdu = vmw_crtc_to_stdu(crtc);
 394         struct vmw_framebuffer *vfb = vmw_framebuffer_to_vfb(new_fb);
 395         struct vmw_surface *new_display_srf = NULL;
 396         enum stdu_content_type new_content_type;
 397         struct vmw_framebuffer_surface *new_vfbs;
 398         int ret;
 399
 400         WARN_ON_ONCE(!stdu->defined);
 401
 402         if (!vfb->dmabuf && new_fb->width == mode->hdisplay &&
 403             new_fb->height == mode->vdisplay)
 404                 new_content_type = SAME_AS_DISPLAY;
 405         else if (vfb->dmabuf)
 406                 new_content_type = SEPARATE_DMA;
 407         else
 408                 new_content_type = SEPARATE_SURFACE;
 409
 410         if (new_content_type != SAME_AS_DISPLAY &&
 411             !stdu->display_srf) {
 412                 struct vmw_surface content_srf;
 413                 struct drm_vmw_size display_base_size = {0};
 414
 415                 display_base_size.width  = mode->hdisplay;
 416                 display_base_size.height = mode->vdisplay;
 417                 display_base_size.depth  = 1;
 418
 419                 /*
 420                  * If content buffer is a DMA buf, then we have to construct
 421                  * surface info
 422                  */
 423                 if (new_content_type == SEPARATE_DMA) {
 424
 425                         switch (new_fb->bits_per_pixel) {
 426                         case 32:
 427                                 content_srf.format = SVGA3D_X8R8G8B8;
 428                                 break;
 429
 430                         case 16:
 431                                 content_srf.format = SVGA3D_R5G6B5;
 432                                 break;
 433
 434                         case 8:
 435                                 content_srf.format = SVGA3D_P8;
 436                                 break;
 437
 438                         default:
 439                                 DRM_ERROR("Invalid format\n");
 440                                 return -EINVAL;
 441                         }
 442
 443                         content_srf.flags             = 0;
 444                         content_srf.mip_levels[0]     = 1;
 445                         content_srf.multisample_count = 0;
 446                 } else {
 447                         new_vfbs = vmw_framebuffer_to_vfbs(new_fb);
 448                         content_srf = *new_vfbs->surface;
 449                 }
 450
 451
 452                 ret = vmw_surface_gb_priv_define(crtc->dev,
 453                                 0, /* because kernel visible only */
 454                                 content_srf.flags,
 455                                 content_srf.format,
 456                                 true, /* a scanout buffer */
 457                                 content_srf.mip_levels[0],
 458                                 content_srf.multisample_count,
 459                                 0,
 460                                 display_base_size,
 461                                 &new_display_srf);
 462                 if (unlikely(ret != 0)) {
 463                         DRM_ERROR("Could not allocate screen target surface.\n");
 464                         return ret;
 465                 }
 466         } else if (new_content_type == SAME_AS_DISPLAY) {
 467                 new_vfbs = vmw_framebuffer_to_vfbs(new_fb);
 468                 new_display_srf = vmw_surface_reference(new_vfbs->surface);
 469         }
 470
 471         if (new_display_srf) {
 472                 /* Pin new surface before flipping */
 473                 ret = vmw_resource_pin(&new_display_srf->res, false);
 474                 if (ret)
 475                         goto out_srf_unref;
 476
 477                 ret = vmw_stdu_bind_st(dev_priv, stdu, &new_display_srf->res);
 478                 if (ret)
 479                         goto out_srf_unpin;
 480
 481                 /* Unpin and unreference old surface */
 482                 vmw_stdu_unpin_display(stdu);
 483
 484                 /* Transfer the reference */
 485                 stdu->display_srf = new_display_srf;
 486                 new_display_srf = NULL;
 487         }
 488
 489         crtc->primary->fb = new_fb;
 490         stdu->content_fb_type = new_content_type;
 491         return 0;
 492
 493 out_srf_unpin:
 494         vmw_resource_unpin(&new_display_srf->res);
 495 out_srf_unref:
 496         vmw_surface_unreference(&new_display_srf);
 497         return ret;
 498 }
 499
 500 /**
 501  * vmw_stdu_crtc_set_config - Sets a mode
 502  *
 503  * @set:  mode parameters
 504  *
 505  * This function is the device-specific portion of the DRM CRTC mode set.
 506  * For the SVGA device, we do this by defining a Screen Target, binding a
 507  * GB Surface to that target, and finally update the screen target.
 508  *
 509  * RETURNS:
 510  * 0 on success, error code otherwise
 511  */
 512 static int vmw_stdu_crtc_set_config(struct drm_mode_set *set)
 513 {
 514         struct vmw_private *dev_priv;
 515         struct vmw_framebuffer *vfb;
 516         struct vmw_screen_target_display_unit *stdu;
 517         struct drm_display_mode *mode;
 518         struct drm_framebuffer  *new_fb;
 519         struct drm_crtc      *crtc;
 520         struct drm_encoder   *encoder;
 521         struct drm_connector *connector;
 522         bool turning_off;
 523         int    ret;
 524
 525
 526         if (!set || !set->crtc)
 527                 return -EINVAL;
 528
 529         crtc     = set->crtc;
 530         stdu     = vmw_crtc_to_stdu(crtc);
 531         mode     = set->mode;
 532         new_fb   = set->fb;
 533         dev_priv = vmw_priv(crtc->dev);
 534         turning_off = set->num_connectors == 0 || !mode || !new_fb;
 535         vfb = (new_fb) ? vmw_framebuffer_to_vfb(new_fb) : NULL;
 536
 537         if (set->num_connectors > 1) {
 538                 DRM_ERROR("Too many connectors\n");
 539                 return -EINVAL;
 540         }
 541
 542         if (set->num_connectors == 1 &&
 543             set->connectors[0] != &stdu->base.connector) {
 544                 DRM_ERROR("Connectors don't match %p %p\n",
 545                         set->connectors[0], &stdu->base.connector);
 546                 return -EINVAL;
 547         }
 548
 549         if (!turning_off && (set->x + mode->hdisplay > new_fb->width ||
 550                              set->y + mode->vdisplay > new_fb->height)) {
 551                 DRM_ERROR("Set outside of framebuffer\n");
 552                 return -EINVAL;
 553         }
 554
 555         /* Only one active implicit frame-buffer at a time. */
 556         mutex_lock(&dev_priv->global_kms_state_mutex);
 557         if (!turning_off && stdu->base.is_implicit && dev_priv->implicit_fb &&
 558             !(dev_priv->num_implicit == 1 && stdu->base.active_implicit)
 559             && dev_priv->implicit_fb != vfb) {
 560                 mutex_unlock(&dev_priv->global_kms_state_mutex);
 561                 DRM_ERROR("Multiple implicit framebuffers not supported.\n");
 562                 return -EINVAL;
 563         }
 564         mutex_unlock(&dev_priv->global_kms_state_mutex);
 565
 566         /* Since they always map one to one these are safe */
 567         connector = &stdu->base.connector;
 568         encoder   = &stdu->base.encoder;
 569
 570         if (stdu->defined) {
 571                 ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
 572                 if (ret)
 573                         return ret;
 574
 575                 vmw_stdu_unpin_display(stdu);
 576                 (void) vmw_stdu_update_st(dev_priv, stdu);
 577                 vmw_kms_del_active(dev_priv, &stdu->base);
 578
 579                 ret = vmw_stdu_destroy_st(dev_priv, stdu);
 580                 if (ret)
 581                         return ret;
 582
 583                 crtc->primary->fb = NULL;
 584                 crtc->enabled = false;
 585                 encoder->crtc = NULL;
 586                 connector->encoder = NULL;
 587                 stdu->content_fb_type = SAME_AS_DISPLAY;
 588                 crtc->x = set->x;
 589                 crtc->y = set->y;
 590         }
 591
 592         if (turning_off)
 593                 return 0;
 594
 595         /*
 596          * Steps to displaying a surface, assume surface is already
 597          * bound:
 598          *   1.  define a screen target
 599          *   2.  bind a fb to the screen target
 600          *   3.  update that screen target (this is done later by
 601          *       vmw_kms_stdu_do_surface_dirty_or_present)
 602          */
 603         /*
 604          * Note on error handling: We can't really restore the crtc to
 605          * it's original state on error, but we at least update the
 606          * current state to what's submitted to hardware to enable
 607          * future recovery.
 608          */
 609         vmw_svga_enable(dev_priv);
 610         ret = vmw_stdu_define_st(dev_priv, stdu, mode, set->x, set->y);
 611         if (ret)
 612                 return ret;
 613
 614         crtc->x = set->x;
 615         crtc->y = set->y;
 616         crtc->mode = *mode;
 617
 618         ret = vmw_stdu_bind_fb(dev_priv, crtc, mode, new_fb);
 619         if (ret)
 620                 return ret;
 621
 622         vmw_kms_add_active(dev_priv, &stdu->base, vfb);
 623         crtc->enabled = true;
 624         connector->encoder = encoder;
 625         encoder->crtc      = crtc;
 626
 627         return 0;
 628 }
 629
 630 /**
 631  * vmw_stdu_crtc_page_flip - Binds a buffer to a screen target
 632  *
 633  * @crtc: CRTC to attach FB to
 634  * @fb: FB to attach
 635  * @event: Event to be posted. This event should've been alloced
 636  *         using k[mz]alloc, and should've been completely initialized.
 637  * @page_flip_flags: Input flags.
 638  *
 639  * If the STDU uses the same display and content buffers, i.e. a true flip,
 640  * this function will replace the existing display buffer with the new content
 641  * buffer.
 642  *
 643  * If the STDU uses different display and content buffers, i.e. a blit, then
 644  * only the content buffer will be updated.
 645  *
 646  * RETURNS:
 647  * 0 on success, error code on failure
 648  */
 649 static int vmw_stdu_crtc_page_flip(struct drm_crtc *crtc,
 650                                    struct drm_framebuffer *new_fb,
 651                                    struct drm_pending_vblank_event *event,
 652                                    uint32_t flags)
 653
 654 {
 655         struct vmw_private *dev_priv = vmw_priv(crtc->dev);
 656         struct vmw_screen_target_display_unit *stdu;
 657         struct drm_vmw_rect vclips;
 658         struct vmw_framebuffer *vfb = vmw_framebuffer_to_vfb(new_fb);
 659         int ret;
 660
 661         dev_priv          = vmw_priv(crtc->dev);
 662         stdu              = vmw_crtc_to_stdu(crtc);
 663
 664         if (!stdu->defined || !vmw_kms_crtc_flippable(dev_priv, crtc))
 665                 return -EINVAL;
 666
 667         ret = vmw_stdu_bind_fb(dev_priv, crtc, &crtc->mode, new_fb);
 668         if (ret)
 669                 return ret;
 670
 671         if (stdu->base.is_implicit)
 672                 vmw_kms_update_implicit_fb(dev_priv, crtc);
 673
 674         vclips.x = crtc->x;
 675         vclips.y = crtc->y;
 676         vclips.w = crtc->mode.hdisplay;
 677         vclips.h = crtc->mode.vdisplay;
 678         if (vfb->dmabuf)
 679                 ret = vmw_kms_stdu_dma(dev_priv, NULL, vfb, NULL, NULL, &vclips,
 680                                        1, 1, true, false);
 681         else
 682                 ret = vmw_kms_stdu_surface_dirty(dev_priv, vfb, NULL, &vclips,
 683                                                  NULL, 0, 0, 1, 1, NULL);
 684         if (ret)
 685                 return ret;
 686
 687         if (event) {
 688                 struct vmw_fence_obj *fence = NULL;
 689                 struct drm_file *file_priv = event->base.file_priv;
 690
 691                 vmw_execbuf_fence_commands(NULL, dev_priv, &fence, NULL);
 692                 if (!fence)
 693                         return -ENOMEM;
 694
 695                 ret = vmw_event_fence_action_queue(file_priv, fence,
 696                                                    &event->base,
 697                                                    &event->event.tv_sec,
 698                                                    &event->event.tv_usec,
 699                                                    true);
 700                 vmw_fence_obj_unreference(&fence);
 701         } else {
 702                 vmw_fifo_flush(dev_priv, false);
 703         }
 704
 705         return 0;
 706 }
 707
 708
 709 /**
 710  * vmw_stdu_dmabuf_clip - Callback to encode a suface DMA command cliprect
 711  *
 712  * @dirty: The closure structure.
 713  *
 714  * Encodes a surface DMA command cliprect and updates the bounding box
 715  * for the DMA.
 716  */
 717 static void vmw_stdu_dmabuf_clip(struct vmw_kms_dirty *dirty)
 718 {
 719         struct vmw_stdu_dirty *ddirty =
 720                 container_of(dirty, struct vmw_stdu_dirty, base);
 721         struct vmw_stdu_dma *cmd = dirty->cmd;
 722         struct SVGA3dCopyBox *blit = (struct SVGA3dCopyBox *) &cmd[1];
 723
 724         blit += dirty->num_hits;
 725         blit->srcx = dirty->fb_x;
 726         blit->srcy = dirty->fb_y;
 727         blit->x = dirty->unit_x1;
 728         blit->y = dirty->unit_y1;
 729         blit->d = 1;
 730         blit->w = dirty->unit_x2 - dirty->unit_x1;
 731         blit->h = dirty->unit_y2 - dirty->unit_y1;
 732         dirty->num_hits++;
 733
 734         if (ddirty->transfer != SVGA3D_WRITE_HOST_VRAM)
 735                 return;
 736
 737         /* Destination bounding box */
 738         ddirty->left = min_t(s32, ddirty->left, dirty->unit_x1);
 739         ddirty->top = min_t(s32, ddirty->top, dirty->unit_y1);
 740         ddirty->right = max_t(s32, ddirty->right, dirty->unit_x2);
 741         ddirty->bottom = max_t(s32, ddirty->bottom, dirty->unit_y2);
 742 }
 743
 744 /**
 745  * vmw_stdu_dmabuf_fifo_commit - Callback to fill in and submit a DMA command.
 746  *
 747  * @dirty: The closure structure.
 748  *
 749  * Fills in the missing fields in a DMA command, and optionally encodes
 750  * a screen target update command, depending on transfer direction.
 751  */
 752 static void vmw_stdu_dmabuf_fifo_commit(struct vmw_kms_dirty *dirty)
 753 {
 754         struct vmw_stdu_dirty *ddirty =
 755                 container_of(dirty, struct vmw_stdu_dirty, base);
 756         struct vmw_screen_target_display_unit *stdu =
 757                 container_of(dirty->unit, typeof(*stdu), base);
 758         struct vmw_stdu_dma *cmd = dirty->cmd;
 759         struct SVGA3dCopyBox *blit = (struct SVGA3dCopyBox *) &cmd[1];
 760         SVGA3dCmdSurfaceDMASuffix *suffix =
 761                 (SVGA3dCmdSurfaceDMASuffix *) &blit[dirty->num_hits];
 762         size_t blit_size = sizeof(*blit) * dirty->num_hits + sizeof(*suffix);
 763
 764         if (!dirty->num_hits) {
 765                 vmw_fifo_commit(dirty->dev_priv, 0);
 766                 return;
 767         }
 768
 769         cmd->header.id = SVGA_3D_CMD_SURFACE_DMA;
 770         cmd->header.size = sizeof(cmd->body) + blit_size;
 771         vmw_bo_get_guest_ptr(&ddirty->buf->base, &cmd->body.guest.ptr);
 772         cmd->body.guest.pitch = ddirty->pitch;
 773         cmd->body.host.sid = stdu->display_srf->res.id;
 774         cmd->body.host.face = 0;
 775         cmd->body.host.mipmap = 0;
 776         cmd->body.transfer = ddirty->transfer;
 777         suffix->suffixSize = sizeof(*suffix);
 778         suffix->maximumOffset = ddirty->buf->base.num_pages * PAGE_SIZE;
 779
 780         if (ddirty->transfer == SVGA3D_WRITE_HOST_VRAM) {
 781                 blit_size += sizeof(struct vmw_stdu_update);
 782
 783                 vmw_stdu_populate_update(&suffix[1], stdu->base.unit,
 784                                          ddirty->left, ddirty->right,
 785                                          ddirty->top, ddirty->bottom);
 786         }
 787
 788         vmw_fifo_commit(dirty->dev_priv, sizeof(*cmd) + blit_size);
 789
 790         ddirty->left = ddirty->top = S32_MAX;
 791         ddirty->right = ddirty->bottom = S32_MIN;
 792 }
 793
 794 /**
 795  * vmw_kms_stdu_dma - Perform a DMA transfer between a dma-buffer backed
 796  * framebuffer and the screen target system.
 797  *
 798  * @dev_priv: Pointer to the device private structure.
 799  * @file_priv: Pointer to a struct drm-file identifying the caller. May be
 800  * set to NULL, but then @user_fence_rep must also be set to NULL.
 801  * @vfb: Pointer to the dma-buffer backed framebuffer.
 802  * @clips: Array of clip rects. Either @clips or @vclips must be NULL.
 803  * @vclips: Alternate array of clip rects. Either @clips or @vclips must
 804  * be NULL.
 805  * @num_clips: Number of clip rects in @clips or @vclips.
 806  * @increment: Increment to use when looping over @clips or @vclips.
 807  * @to_surface: Whether to DMA to the screen target system as opposed to
 808  * from the screen target system.
 809  * @interruptible: Whether to perform waits interruptible if possible.
 810  *
 811  * If DMA-ing till the screen target system, the function will also notify
 812  * the screen target system that a bounding box of the cliprects has been
 813  * updated.
 814  * Returns 0 on success, negative error code on failure. -ERESTARTSYS if
 815  * interrupted.
 816  */
 817 int vmw_kms_stdu_dma(struct vmw_private *dev_priv,
 818                      struct drm_file *file_priv,
 819                      struct vmw_framebuffer *vfb,
 820                      struct drm_vmw_fence_rep __user *user_fence_rep,
 821                      struct drm_clip_rect *clips,
 822                      struct drm_vmw_rect *vclips,
 823                      uint32_t num_clips,
 824                      int increment,
 825                      bool to_surface,
 826                      bool interruptible)
 827 {
 828         struct vmw_dma_buffer *buf =
 829                 container_of(vfb, struct vmw_framebuffer_dmabuf, base)->buffer;
 830         struct vmw_stdu_dirty ddirty;
 831         int ret;
 832
 833         ret = vmw_kms_helper_buffer_prepare(dev_priv, buf, interruptible,
 834                                             false);
 835         if (ret)
 836                 return ret;
 837
 838         ddirty.transfer = (to_surface) ? SVGA3D_WRITE_HOST_VRAM :
 839                 SVGA3D_READ_HOST_VRAM;
 840         ddirty.left = ddirty.top = S32_MAX;
 841         ddirty.right = ddirty.bottom = S32_MIN;
 842         ddirty.pitch = vfb->base.pitches[0];
 843         ddirty.buf = buf;
 844         ddirty.base.fifo_commit = vmw_stdu_dmabuf_fifo_commit;
 845         ddirty.base.clip = vmw_stdu_dmabuf_clip;
 846         ddirty.base.fifo_reserve_size = sizeof(struct vmw_stdu_dma) +
 847                 num_clips * sizeof(SVGA3dCopyBox) +
 848                 sizeof(SVGA3dCmdSurfaceDMASuffix);
 849         if (to_surface)
 850                 ddirty.base.fifo_reserve_size += sizeof(struct vmw_stdu_update);
 851
 852         ret = vmw_kms_helper_dirty(dev_priv, vfb, clips, vclips,
 853                                    0, 0, num_clips, increment, &ddirty.base);
 854         vmw_kms_helper_buffer_finish(dev_priv, file_priv, buf, NULL,
 855                                      user_fence_rep);
 856
 857         return ret;
 858 }
 859
 860 /**
 861  * vmw_stdu_surface_clip - Callback to encode a surface copy command cliprect
 862  *
 863  * @dirty: The closure structure.
 864  *
 865  * Encodes a surface copy command cliprect and updates the bounding box
 866  * for the copy.
 867  */
 868 static void vmw_kms_stdu_surface_clip(struct vmw_kms_dirty *dirty)
 869 {
 870         struct vmw_stdu_dirty *sdirty =
 871                 container_of(dirty, struct vmw_stdu_dirty, base);
 872         struct vmw_stdu_surface_copy *cmd = dirty->cmd;
 873         struct vmw_screen_target_display_unit *stdu =
 874                 container_of(dirty->unit, typeof(*stdu), base);
 875
 876         if (sdirty->sid != stdu->display_srf->res.id) {
 877                 struct SVGA3dCopyBox *blit = (struct SVGA3dCopyBox *) &cmd[1];
 878
 879                 blit += dirty->num_hits;
 880                 blit->srcx = dirty->fb_x;
 881                 blit->srcy = dirty->fb_y;
 882                 blit->x = dirty->unit_x1;
 883                 blit->y = dirty->unit_y1;
 884                 blit->d = 1;
 885                 blit->w = dirty->unit_x2 - dirty->unit_x1;
 886                 blit->h = dirty->unit_y2 - dirty->unit_y1;
 887         }
 888
 889         dirty->num_hits++;
 890
 891         /* Destination bounding box */
 892         sdirty->left = min_t(s32, sdirty->left, dirty->unit_x1);
 893         sdirty->top = min_t(s32, sdirty->top, dirty->unit_y1);
 894         sdirty->right = max_t(s32, sdirty->right, dirty->unit_x2);
 895         sdirty->bottom = max_t(s32, sdirty->bottom, dirty->unit_y2);
 896 }
 897
 898 /**
 899  * vmw_stdu_surface_fifo_commit - Callback to fill in and submit a surface
 900  * copy command.
 901  *
 902  * @dirty: The closure structure.
 903  *
 904  * Fills in the missing fields in a surface copy command, and encodes a screen
 905  * target update command.
 906  */
 907 static void vmw_kms_stdu_surface_fifo_commit(struct vmw_kms_dirty *dirty)
 908 {
 909         struct vmw_stdu_dirty *sdirty =
 910                 container_of(dirty, struct vmw_stdu_dirty, base);
 911         struct vmw_screen_target_display_unit *stdu =
 912                 container_of(dirty->unit, typeof(*stdu), base);
 913         struct vmw_stdu_surface_copy *cmd = dirty->cmd;
 914         struct vmw_stdu_update *update;
 915         size_t blit_size = sizeof(SVGA3dCopyBox) * dirty->num_hits;
 916         size_t commit_size;
 917
 918         if (!dirty->num_hits) {
 919                 vmw_fifo_commit(dirty->dev_priv, 0);
 920                 return;
 921         }
 922
 923         if (sdirty->sid != stdu->display_srf->res.id) {
 924                 struct SVGA3dCopyBox *blit = (struct SVGA3dCopyBox *) &cmd[1];
 925
 926                 cmd->header.id = SVGA_3D_CMD_SURFACE_COPY;
 927                 cmd->header.size = sizeof(cmd->body) + blit_size;
 928                 cmd->body.src.sid = sdirty->sid;
 929                 cmd->body.dest.sid = stdu->display_srf->res.id;
 930                 update = (struct vmw_stdu_update *) &blit[dirty->num_hits];
 931                 commit_size = sizeof(*cmd) + blit_size + sizeof(*update);
 932         } else {
 933                 update = dirty->cmd;
 934                 commit_size = sizeof(*update);
 935         }
 936
 937         vmw_stdu_populate_update(update, stdu->base.unit, sdirty->left,
 938                                  sdirty->right, sdirty->top, sdirty->bottom);
 939
 940         vmw_fifo_commit(dirty->dev_priv, commit_size);
 941
 942         sdirty->left = sdirty->top = S32_MAX;
 943         sdirty->right = sdirty->bottom = S32_MIN;
 944 }
 945
 946 /**
 947  * vmw_kms_stdu_surface_dirty - Dirty part of a surface backed framebuffer
 948  *
 949  * @dev_priv: Pointer to the device private structure.
 950  * @framebuffer: Pointer to the surface-buffer backed framebuffer.
 951  * @clips: Array of clip rects. Either @clips or @vclips must be NULL.
 952  * @vclips: Alternate array of clip rects. Either @clips or @vclips must
 953  * be NULL.
 954  * @srf: Pointer to surface to blit from. If NULL, the surface attached
 955  * to @framebuffer will be used.
 956  * @dest_x: X coordinate offset to align @srf with framebuffer coordinates.
 957  * @dest_y: Y coordinate offset to align @srf with framebuffer coordinates.
 958  * @num_clips: Number of clip rects in @clips.
 959  * @inc: Increment to use when looping over @clips.
 960  * @out_fence: If non-NULL, will return a ref-counted pointer to a
 961  * struct vmw_fence_obj. The returned fence pointer may be NULL in which
 962  * case the device has already synchronized.
 963  *
 964  * Returns 0 on success, negative error code on failure. -ERESTARTSYS if
 965  * interrupted.
 966  */
 967 int vmw_kms_stdu_surface_dirty(struct vmw_private *dev_priv,
 968                                struct vmw_framebuffer *framebuffer,
 969                                struct drm_clip_rect *clips,
 970                                struct drm_vmw_rect *vclips,
 971                                struct vmw_resource *srf,
 972                                s32 dest_x,
 973                                s32 dest_y,
 974                                unsigned num_clips, int inc,
 975                                struct vmw_fence_obj **out_fence)
 976 {
 977         struct vmw_framebuffer_surface *vfbs =
 978                 container_of(framebuffer, typeof(*vfbs), base);
 979         struct vmw_stdu_dirty sdirty;
 980         int ret;
 981
 982         if (!srf)
 983                 srf = &vfbs->surface->res;
 984
 985         ret = vmw_kms_helper_resource_prepare(srf, true);
 986         if (ret)
 987                 return ret;
 988
 989         if (vfbs->is_dmabuf_proxy) {
 990                 ret = vmw_kms_update_proxy(srf, clips, num_clips, inc);
 991                 if (ret)
 992                         goto out_finish;
 993         }
 994
 995         sdirty.base.fifo_commit = vmw_kms_stdu_surface_fifo_commit;
 996         sdirty.base.clip = vmw_kms_stdu_surface_clip;
 997         sdirty.base.fifo_reserve_size = sizeof(struct vmw_stdu_surface_copy) +
 998                 sizeof(SVGA3dCopyBox) * num_clips +
 999                 sizeof(struct vmw_stdu_update);
1000         sdirty.sid = srf->id;
1001         sdirty.left = sdirty.top = S32_MAX;
1002         sdirty.right = sdirty.bottom = S32_MIN;
1003
1004         ret = vmw_kms_helper_dirty(dev_priv, framebuffer, clips, vclips,
1005                                    dest_x, dest_y, num_clips, inc,
1006                                    &sdirty.base);
1007 out_finish:
1008         vmw_kms_helper_resource_finish(srf, out_fence);
1009
1010         return ret;
1011 }
1012
1013
1014 /*
1015  *  Screen Target CRTC dispatch table
1016  */
1017 static const struct drm_crtc_funcs vmw_stdu_crtc_funcs = {
1018         .cursor_set2 = vmw_du_crtc_cursor_set2,
1019         .cursor_move = vmw_du_crtc_cursor_move,
1020         .gamma_set = vmw_du_crtc_gamma_set,
1021         .destroy = vmw_stdu_crtc_destroy,
1022         .set_config = vmw_stdu_crtc_set_config,
1023         .page_flip = vmw_stdu_crtc_page_flip,
1024 };
1025
1026
1027
1028 /******************************************************************************
1029  * Screen Target Display Unit Encoder Functions
1030  *****************************************************************************/
1031
1032 /**
1033  * vmw_stdu_encoder_destroy - cleans up the STDU
1034  *
1035  * @encoder: used the get the containing STDU
1036  *
1037  * vmwgfx cleans up crtc/encoder/connector all at the same time so technically
1038  * this can be a no-op.  Nevertheless, it doesn't hurt of have this in case
1039  * the common KMS code changes and somehow vmw_stdu_crtc_destroy() doesn't
1040  * get called.
1041  */
1042 static void vmw_stdu_encoder_destroy(struct drm_encoder *encoder)
1043 {
1044         vmw_stdu_destroy(vmw_encoder_to_stdu(encoder));
1045 }
1046
1047 static const struct drm_encoder_funcs vmw_stdu_encoder_funcs = {
1048         .destroy = vmw_stdu_encoder_destroy,
1049 };
1050
1051
1052
1053 /******************************************************************************
1054  * Screen Target Display Unit Connector Functions
1055  *****************************************************************************/
1056
1057 /**
1058  * vmw_stdu_connector_destroy - cleans up the STDU
1059  *
1060  * @connector: used to get the containing STDU
1061  *
1062  * vmwgfx cleans up crtc/encoder/connector all at the same time so technically
1063  * this can be a no-op.  Nevertheless, it doesn't hurt of have this in case
1064  * the common KMS code changes and somehow vmw_stdu_crtc_destroy() doesn't
1065  * get called.
1066  */
1067 static void vmw_stdu_connector_destroy(struct drm_connector *connector)
1068 {
1069         vmw_stdu_destroy(vmw_connector_to_stdu(connector));
1070 }
1071
1072
1073
1074 static const struct drm_connector_funcs vmw_stdu_connector_funcs = {
1075         .dpms = vmw_du_connector_dpms,
1076         .detect = vmw_du_connector_detect,
1077         .fill_modes = vmw_du_connector_fill_modes,
1078         .set_property = vmw_du_connector_set_property,
1079         .destroy = vmw_stdu_connector_destroy,
1080 };
1081
1082
1083
1084 /**
1085  * vmw_stdu_init - Sets up a Screen Target Display Unit
1086  *
1087  * @dev_priv: VMW DRM device
1088  * @unit: unit number range from 0 to VMWGFX_NUM_DISPLAY_UNITS
1089  *
1090  * This function is called once per CRTC, and allocates one Screen Target
1091  * display unit to represent that CRTC.  Since the SVGA device does not separate
1092  * out encoder and connector, they are represented as part of the STDU as well.
1093  */
1094 static int vmw_stdu_init(struct vmw_private *dev_priv, unsigned unit)
1095 {
1096         struct vmw_screen_target_display_unit *stdu;
1097         struct drm_device *dev = dev_priv->dev;
1098         struct drm_connector *connector;
1099         struct drm_encoder *encoder;
1100         struct drm_crtc *crtc;
1101
1102
1103         stdu = kzalloc(sizeof(*stdu), GFP_KERNEL);
1104         if (!stdu)
1105                 return -ENOMEM;
1106
1107         stdu->base.unit = unit;
1108         crtc = &stdu->base.crtc;
1109         encoder = &stdu->base.encoder;
1110         connector = &stdu->base.connector;
1111
1112         stdu->base.pref_active = (unit == 0);
1113         stdu->base.pref_width  = dev_priv->initial_width;
1114         stdu->base.pref_height = dev_priv->initial_height;
1115         stdu->base.is_implicit = false;
1116
1117         drm_connector_init(dev, connector, &vmw_stdu_connector_funcs,
1118                            DRM_MODE_CONNECTOR_VIRTUAL);
1119         connector->status = vmw_du_connector_detect(connector, false);
1120
1121         drm_encoder_init(dev, encoder, &vmw_stdu_encoder_funcs,
1122                          DRM_MODE_ENCODER_VIRTUAL, NULL);
1123         drm_mode_connector_attach_encoder(connector, encoder);
1124         encoder->possible_crtcs = (1 << unit);
1125         encoder->possible_clones = 0;
1126
1127         (void) drm_connector_register(connector);
1128
1129         drm_crtc_init(dev, crtc, &vmw_stdu_crtc_funcs);
1130
1131         drm_mode_crtc_set_gamma_size(crtc, 256);
1132
1133         drm_object_attach_property(&connector->base,
1134                                    dev->mode_config.dirty_info_property,
1135                                    1);
1136         drm_object_attach_property(&connector->base,
1137                                    dev_priv->hotplug_mode_update_property, 1);
1138         drm_object_attach_property(&connector->base,
1139                                    dev->mode_config.suggested_x_property, 0);
1140         drm_object_attach_property(&connector->base,
1141                                    dev->mode_config.suggested_y_property, 0);
1142         if (dev_priv->implicit_placement_property)
1143                 drm_object_attach_property
1144                         (&connector->base,
1145                          dev_priv->implicit_placement_property,
1146                          stdu->base.is_implicit);
1147         return 0;
1148 }
1149
1150
1151
1152 /**
1153  *  vmw_stdu_destroy - Cleans up a vmw_screen_target_display_unit
1154  *
1155  *  @stdu:  Screen Target Display Unit to be destroyed
1156  *
1157  *  Clean up after vmw_stdu_init
1158  */
1159 static void vmw_stdu_destroy(struct vmw_screen_target_display_unit *stdu)
1160 {
1161         vmw_stdu_unpin_display(stdu);
1162
1163         vmw_du_cleanup(&stdu->base);
1164         kfree(stdu);
1165 }
1166
1167
1168
1169 /******************************************************************************
1170  * Screen Target Display KMS Functions
1171  *
1172  * These functions are called by the common KMS code in vmwgfx_kms.c
1173  *****************************************************************************/
1174
1175 /**
1176  * vmw_kms_stdu_init_display - Initializes a Screen Target based display
1177  *
1178  * @dev_priv: VMW DRM device
1179  *
1180  * This function initialize a Screen Target based display device.  It checks
1181  * the capability bits to make sure the underlying hardware can support
1182  * screen targets, and then creates the maximum number of CRTCs, a.k.a Display
1183  * Units, as supported by the display hardware.
1184  *
1185  * RETURNS:
1186  * 0 on success, error code otherwise
1187  */
1188 int vmw_kms_stdu_init_display(struct vmw_private *dev_priv)
1189 {
1190         struct drm_device *dev = dev_priv->dev;
1191         int i, ret;
1192
1193
1194         /* Do nothing if Screen Target support is turned off */
1195         if (!VMWGFX_ENABLE_SCREEN_TARGET_OTABLE)
1196                 return -ENOSYS;
1197
1198         if (!(dev_priv->capabilities & SVGA_CAP_GBOBJECTS))
1199                 return -ENOSYS;
1200
1201         ret = drm_vblank_init(dev, VMWGFX_NUM_DISPLAY_UNITS);
1202         if (unlikely(ret != 0))
1203                 return ret;
1204
1205         ret = drm_mode_create_dirty_info_property(dev);
1206         if (unlikely(ret != 0))
1207                 goto err_vblank_cleanup;
1208
1209         dev_priv->active_display_unit = vmw_du_screen_target;
1210
1211         vmw_kms_create_implicit_placement_property(dev_priv, false);
1212
1213         for (i = 0; i < VMWGFX_NUM_DISPLAY_UNITS; ++i) {
1214                 ret = vmw_stdu_init(dev_priv, i);
1215
1216                 if (unlikely(ret != 0)) {
1217                         DRM_ERROR("Failed to initialize STDU %d", i);
1218                         goto err_vblank_cleanup;
1219                 }
1220         }
1221
1222         DRM_INFO("Screen Target Display device initialized\n");
1223
1224         return 0;
1225
1226 err_vblank_cleanup:
1227         drm_vblank_cleanup(dev);
1228         return ret;
1229 }
1230
1231
1232
1233 /**
1234  * vmw_kms_stdu_close_display - Cleans up after vmw_kms_stdu_init_display
1235  *
1236  * @dev_priv: VMW DRM device
1237  *
1238  * Frees up any resources allocated by vmw_kms_stdu_init_display
1239  *
1240  * RETURNS:
1241  * 0 on success
1242  */
1243 int vmw_kms_stdu_close_display(struct vmw_private *dev_priv)
1244 {
1245         struct drm_device *dev = dev_priv->dev;
1246
1247         drm_vblank_cleanup(dev);
1248
1249         return 0;
1250 }