Merge branch 'parisc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
[cascardo/linux.git] / drivers / hwmon / lm73.c
1 /*
2  * LM73 Sensor driver
3  * Based on LM75
4  *
5  * Copyright (C) 2007, CenoSYS (www.cenosys.com).
6  * Copyright (C) 2009, Bollore telecom (www.bolloretelecom.eu).
7  *
8  * Guillaume Ligneul <guillaume.ligneul@gmail.com>
9  * Adrien Demarez <adrien.demarez@bolloretelecom.eu>
10  * Jeremy Laine <jeremy.laine@bolloretelecom.eu>
11  * Chris Verges <kg4ysn@gmail.com>
12  *
13  * This software program is licensed subject to the GNU General Public License
14  * (GPL).Version 2,June 1991, available at
15  * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
16  */
17
18 #include <linux/module.h>
19 #include <linux/init.h>
20 #include <linux/i2c.h>
21 #include <linux/hwmon.h>
22 #include <linux/hwmon-sysfs.h>
23 #include <linux/err.h>
24
25
26 /* Addresses scanned */
27 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c,
28                                         0x4d, 0x4e, I2C_CLIENT_END };
29
30 /* LM73 registers */
31 #define LM73_REG_INPUT          0x00
32 #define LM73_REG_CONF           0x01
33 #define LM73_REG_MAX            0x02
34 #define LM73_REG_MIN            0x03
35 #define LM73_REG_CTRL           0x04
36 #define LM73_REG_ID             0x07
37
38 #define LM73_ID                 0x9001  /* 0x0190, byte-swapped */
39 #define DRVNAME                 "lm73"
40 #define LM73_TEMP_MIN           (-256000 / 250)
41 #define LM73_TEMP_MAX           (255750 / 250)
42
43 #define LM73_CTRL_RES_SHIFT     5
44 #define LM73_CTRL_RES_MASK      (BIT(5) | BIT(6))
45 #define LM73_CTRL_TO_MASK       BIT(7)
46
47 #define LM73_CTRL_HI_SHIFT      2
48 #define LM73_CTRL_LO_SHIFT      1
49
50 static const unsigned short lm73_convrates[] = {
51         14,     /* 11-bits (0.25000 C/LSB): RES1 Bit = 0, RES0 Bit = 0 */
52         28,     /* 12-bits (0.12500 C/LSB): RES1 Bit = 0, RES0 Bit = 1 */
53         56,     /* 13-bits (0.06250 C/LSB): RES1 Bit = 1, RES0 Bit = 0 */
54         112,    /* 14-bits (0.03125 C/LSB): RES1 Bit = 1, RES0 Bit = 1 */
55 };
56
57 struct lm73_data {
58         struct i2c_client *client;
59         struct mutex lock;
60         u8 ctrl;                        /* control register value */
61 };
62
63 /*-----------------------------------------------------------------------*/
64
65 static ssize_t set_temp(struct device *dev, struct device_attribute *da,
66                         const char *buf, size_t count)
67 {
68         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
69         struct lm73_data *data = dev_get_drvdata(dev);
70         long temp;
71         short value;
72         s32 err;
73
74         int status = kstrtol(buf, 10, &temp);
75         if (status < 0)
76                 return status;
77
78         /* Write value */
79         value = clamp_val(temp / 250, LM73_TEMP_MIN, LM73_TEMP_MAX) << 5;
80         err = i2c_smbus_write_word_swapped(data->client, attr->index, value);
81         return (err < 0) ? err : count;
82 }
83
84 static ssize_t show_temp(struct device *dev, struct device_attribute *da,
85                          char *buf)
86 {
87         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
88         struct lm73_data *data = dev_get_drvdata(dev);
89         int temp;
90
91         s32 err = i2c_smbus_read_word_swapped(data->client, attr->index);
92         if (err < 0)
93                 return err;
94
95         /* use integer division instead of equivalent right shift to
96            guarantee arithmetic shift and preserve the sign */
97         temp = (((s16) err) * 250) / 32;
98         return scnprintf(buf, PAGE_SIZE, "%d\n", temp);
99 }
100
101 static ssize_t set_convrate(struct device *dev, struct device_attribute *da,
102                             const char *buf, size_t count)
103 {
104         struct lm73_data *data = dev_get_drvdata(dev);
105         unsigned long convrate;
106         s32 err;
107         int res = 0;
108
109         err = kstrtoul(buf, 10, &convrate);
110         if (err < 0)
111                 return err;
112
113         /*
114          * Convert the desired conversion rate into register bits.
115          * res is already initialized, and everything past the second-to-last
116          * value in the array is treated as belonging to the last value
117          * in the array.
118          */
119         while (res < (ARRAY_SIZE(lm73_convrates) - 1) &&
120                         convrate > lm73_convrates[res])
121                 res++;
122
123         mutex_lock(&data->lock);
124         data->ctrl &= LM73_CTRL_TO_MASK;
125         data->ctrl |= res << LM73_CTRL_RES_SHIFT;
126         err = i2c_smbus_write_byte_data(data->client, LM73_REG_CTRL,
127                                         data->ctrl);
128         mutex_unlock(&data->lock);
129
130         if (err < 0)
131                 return err;
132
133         return count;
134 }
135
136 static ssize_t show_convrate(struct device *dev, struct device_attribute *da,
137                              char *buf)
138 {
139         struct lm73_data *data = dev_get_drvdata(dev);
140         int res;
141
142         res = (data->ctrl & LM73_CTRL_RES_MASK) >> LM73_CTRL_RES_SHIFT;
143         return scnprintf(buf, PAGE_SIZE, "%hu\n", lm73_convrates[res]);
144 }
145
146 static ssize_t show_maxmin_alarm(struct device *dev,
147                                  struct device_attribute *da, char *buf)
148 {
149         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
150         struct lm73_data *data = dev_get_drvdata(dev);
151         s32 ctrl;
152
153         mutex_lock(&data->lock);
154         ctrl = i2c_smbus_read_byte_data(data->client, LM73_REG_CTRL);
155         if (ctrl < 0)
156                 goto abort;
157         data->ctrl = ctrl;
158         mutex_unlock(&data->lock);
159
160         return scnprintf(buf, PAGE_SIZE, "%d\n", (ctrl >> attr->index) & 1);
161
162 abort:
163         mutex_unlock(&data->lock);
164         return ctrl;
165 }
166
167 /*-----------------------------------------------------------------------*/
168
169 /* sysfs attributes for hwmon */
170
171 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
172                         show_temp, set_temp, LM73_REG_MAX);
173 static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
174                         show_temp, set_temp, LM73_REG_MIN);
175 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
176                         show_temp, NULL, LM73_REG_INPUT);
177 static SENSOR_DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO,
178                         show_convrate, set_convrate, 0);
179 static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
180                         show_maxmin_alarm, NULL, LM73_CTRL_HI_SHIFT);
181 static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO,
182                         show_maxmin_alarm, NULL, LM73_CTRL_LO_SHIFT);
183
184 static struct attribute *lm73_attrs[] = {
185         &sensor_dev_attr_temp1_input.dev_attr.attr,
186         &sensor_dev_attr_temp1_max.dev_attr.attr,
187         &sensor_dev_attr_temp1_min.dev_attr.attr,
188         &sensor_dev_attr_update_interval.dev_attr.attr,
189         &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
190         &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
191         NULL
192 };
193 ATTRIBUTE_GROUPS(lm73);
194
195 /*-----------------------------------------------------------------------*/
196
197 /* device probe and removal */
198
199 static int
200 lm73_probe(struct i2c_client *client, const struct i2c_device_id *id)
201 {
202         struct device *dev = &client->dev;
203         struct device *hwmon_dev;
204         struct lm73_data *data;
205         int ctrl;
206
207         data = devm_kzalloc(dev, sizeof(struct lm73_data), GFP_KERNEL);
208         if (!data)
209                 return -ENOMEM;
210
211         data->client = client;
212         mutex_init(&data->lock);
213
214         ctrl = i2c_smbus_read_byte_data(client, LM73_REG_CTRL);
215         if (ctrl < 0)
216                 return ctrl;
217         data->ctrl = ctrl;
218
219         hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
220                                                            data, lm73_groups);
221         if (IS_ERR(hwmon_dev))
222                 return PTR_ERR(hwmon_dev);
223
224         dev_info(dev, "sensor '%s'\n", client->name);
225
226         return 0;
227 }
228
229 static const struct i2c_device_id lm73_ids[] = {
230         { "lm73", 0 },
231         { /* LIST END */ }
232 };
233 MODULE_DEVICE_TABLE(i2c, lm73_ids);
234
235 /* Return 0 if detection is successful, -ENODEV otherwise */
236 static int lm73_detect(struct i2c_client *new_client,
237                         struct i2c_board_info *info)
238 {
239         struct i2c_adapter *adapter = new_client->adapter;
240         int id, ctrl, conf;
241
242         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
243                                         I2C_FUNC_SMBUS_WORD_DATA))
244                 return -ENODEV;
245
246         /*
247          * Do as much detection as possible with byte reads first, as word
248          * reads can confuse other devices.
249          */
250         ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL);
251         if (ctrl < 0 || (ctrl & 0x10))
252                 return -ENODEV;
253
254         conf = i2c_smbus_read_byte_data(new_client, LM73_REG_CONF);
255         if (conf < 0 || (conf & 0x0c))
256                 return -ENODEV;
257
258         id = i2c_smbus_read_byte_data(new_client, LM73_REG_ID);
259         if (id < 0 || id != (LM73_ID & 0xff))
260                 return -ENODEV;
261
262         /* Check device ID */
263         id = i2c_smbus_read_word_data(new_client, LM73_REG_ID);
264         if (id < 0 || id != LM73_ID)
265                 return -ENODEV;
266
267         strlcpy(info->type, "lm73", I2C_NAME_SIZE);
268
269         return 0;
270 }
271
272 static struct i2c_driver lm73_driver = {
273         .class          = I2C_CLASS_HWMON,
274         .driver = {
275                 .name   = "lm73",
276         },
277         .probe          = lm73_probe,
278         .id_table       = lm73_ids,
279         .detect         = lm73_detect,
280         .address_list   = normal_i2c,
281 };
282
283 module_i2c_driver(lm73_driver);
284
285 MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@gmail.com>");
286 MODULE_DESCRIPTION("LM73 driver");
287 MODULE_LICENSE("GPL");