drivers/i2c/busses/i2c-omap.c

   1 /*
   2  * TI OMAP I2C master mode driver
   3  *
   4  * Copyright (C) 2003 MontaVista Software, Inc.
   5  * Copyright (C) 2005 Nokia Corporation
   6  * Copyright (C) 2004 - 2007 Texas Instruments.
   7  *
   8  * Originally written by MontaVista Software, Inc.
   9  * Additional contributions by:
  10  *      Tony Lindgren <tony@atomide.com>
  11  *      Imre Deak <imre.deak@nokia.com>
  12  *      Juha Yrjölä <juha.yrjola@solidboot.com>
  13  *      Syed Khasim <x0khasim@ti.com>
  14  *      Nishant Menon <nm@ti.com>
  15  *
  16  * This program is free software; you can redistribute it and/or modify
  17  * it under the terms of the GNU General Public License as published by
  18  * the Free Software Foundation; either version 2 of the License, or
  19  * (at your option) any later version.
  20  *
  21  * This program is distributed in the hope that it will be useful,
  22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  24  * GNU General Public License for more details.
  25  */
  26
  27 #include <linux/module.h>
  28 #include <linux/delay.h>
  29 #include <linux/i2c.h>
  30 #include <linux/err.h>
  31 #include <linux/interrupt.h>
  32 #include <linux/completion.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/clk.h>
  35 #include <linux/io.h>
  36 #include <linux/of.h>
  37 #include <linux/of_device.h>
  38 #include <linux/slab.h>
  39 #include <linux/i2c-omap.h>
  40 #include <linux/pm_runtime.h>
  41 #include <linux/pinctrl/consumer.h>
  42
  43 /* I2C controller revisions */
  44 #define OMAP_I2C_OMAP1_REV_2            0x20
  45
  46 /* I2C controller revisions present on specific hardware */
  47 #define OMAP_I2C_REV_ON_2430            0x00000036
  48 #define OMAP_I2C_REV_ON_3430_3530       0x0000003C
  49 #define OMAP_I2C_REV_ON_3630            0x00000040
  50 #define OMAP_I2C_REV_ON_4430_PLUS       0x50400002
  51
  52 /* timeout waiting for the controller to respond */
  53 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
  54
  55 /* timeout for pm runtime autosuspend */
  56 #define OMAP_I2C_PM_TIMEOUT             1000    /* ms */
  57
  58 /* timeout for making decision on bus free status */
  59 #define OMAP_I2C_BUS_FREE_TIMEOUT (msecs_to_jiffies(10))
  60
  61 /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
  62 enum {
  63         OMAP_I2C_REV_REG = 0,
  64         OMAP_I2C_IE_REG,
  65         OMAP_I2C_STAT_REG,
  66         OMAP_I2C_IV_REG,
  67         OMAP_I2C_WE_REG,
  68         OMAP_I2C_SYSS_REG,
  69         OMAP_I2C_BUF_REG,
  70         OMAP_I2C_CNT_REG,
  71         OMAP_I2C_DATA_REG,
  72         OMAP_I2C_SYSC_REG,
  73         OMAP_I2C_CON_REG,
  74         OMAP_I2C_OA_REG,
  75         OMAP_I2C_SA_REG,
  76         OMAP_I2C_PSC_REG,
  77         OMAP_I2C_SCLL_REG,
  78         OMAP_I2C_SCLH_REG,
  79         OMAP_I2C_SYSTEST_REG,
  80         OMAP_I2C_BUFSTAT_REG,
  81         /* only on OMAP4430 */
  82         OMAP_I2C_IP_V2_REVNB_LO,
  83         OMAP_I2C_IP_V2_REVNB_HI,
  84         OMAP_I2C_IP_V2_IRQSTATUS_RAW,
  85         OMAP_I2C_IP_V2_IRQENABLE_SET,
  86         OMAP_I2C_IP_V2_IRQENABLE_CLR,
  87 };
  88
  89 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
  90 #define OMAP_I2C_IE_XDR         (1 << 14)       /* TX Buffer drain int enable */
  91 #define OMAP_I2C_IE_RDR         (1 << 13)       /* RX Buffer drain int enable */
  92 #define OMAP_I2C_IE_XRDY        (1 << 4)        /* TX data ready int enable */
  93 #define OMAP_I2C_IE_RRDY        (1 << 3)        /* RX data ready int enable */
  94 #define OMAP_I2C_IE_ARDY        (1 << 2)        /* Access ready int enable */
  95 #define OMAP_I2C_IE_NACK        (1 << 1)        /* No ack interrupt enable */
  96 #define OMAP_I2C_IE_AL          (1 << 0)        /* Arbitration lost int ena */
  97
  98 /* I2C Status Register (OMAP_I2C_STAT): */
  99 #define OMAP_I2C_STAT_XDR       (1 << 14)       /* TX Buffer draining */
 100 #define OMAP_I2C_STAT_RDR       (1 << 13)       /* RX Buffer draining */
 101 #define OMAP_I2C_STAT_BB        (1 << 12)       /* Bus busy */
 102 #define OMAP_I2C_STAT_ROVR      (1 << 11)       /* Receive overrun */
 103 #define OMAP_I2C_STAT_XUDF      (1 << 10)       /* Transmit underflow */
 104 #define OMAP_I2C_STAT_AAS       (1 << 9)        /* Address as slave */
 105 #define OMAP_I2C_STAT_BF        (1 << 8)        /* Bus Free */
 106 #define OMAP_I2C_STAT_XRDY      (1 << 4)        /* Transmit data ready */
 107 #define OMAP_I2C_STAT_RRDY      (1 << 3)        /* Receive data ready */
 108 #define OMAP_I2C_STAT_ARDY      (1 << 2)        /* Register access ready */
 109 #define OMAP_I2C_STAT_NACK      (1 << 1)        /* No ack interrupt enable */
 110 #define OMAP_I2C_STAT_AL        (1 << 0)        /* Arbitration lost int ena */
 111
 112 /* I2C WE wakeup enable register */
 113 #define OMAP_I2C_WE_XDR_WE      (1 << 14)       /* TX drain wakup */
 114 #define OMAP_I2C_WE_RDR_WE      (1 << 13)       /* RX drain wakeup */
 115 #define OMAP_I2C_WE_AAS_WE      (1 << 9)        /* Address as slave wakeup*/
 116 #define OMAP_I2C_WE_BF_WE       (1 << 8)        /* Bus free wakeup */
 117 #define OMAP_I2C_WE_STC_WE      (1 << 6)        /* Start condition wakeup */
 118 #define OMAP_I2C_WE_GC_WE       (1 << 5)        /* General call wakeup */
 119 #define OMAP_I2C_WE_DRDY_WE     (1 << 3)        /* TX/RX data ready wakeup */
 120 #define OMAP_I2C_WE_ARDY_WE     (1 << 2)        /* Reg access ready wakeup */
 121 #define OMAP_I2C_WE_NACK_WE     (1 << 1)        /* No acknowledgment wakeup */
 122 #define OMAP_I2C_WE_AL_WE       (1 << 0)        /* Arbitration lost wakeup */
 123
 124 #define OMAP_I2C_WE_ALL         (OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \
 125                                 OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \
 126                                 OMAP_I2C_WE_STC_WE | OMAP_I2C_WE_GC_WE | \
 127                                 OMAP_I2C_WE_DRDY_WE | OMAP_I2C_WE_ARDY_WE | \
 128                                 OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE)
 129
 130 /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
 131 #define OMAP_I2C_BUF_RDMA_EN    (1 << 15)       /* RX DMA channel enable */
 132 #define OMAP_I2C_BUF_RXFIF_CLR  (1 << 14)       /* RX FIFO Clear */
 133 #define OMAP_I2C_BUF_XDMA_EN    (1 << 7)        /* TX DMA channel enable */
 134 #define OMAP_I2C_BUF_TXFIF_CLR  (1 << 6)        /* TX FIFO Clear */
 135
 136 /* I2C Configuration Register (OMAP_I2C_CON): */
 137 #define OMAP_I2C_CON_EN         (1 << 15)       /* I2C module enable */
 138 #define OMAP_I2C_CON_BE         (1 << 14)       /* Big endian mode */
 139 #define OMAP_I2C_CON_OPMODE_HS  (1 << 12)       /* High Speed support */
 140 #define OMAP_I2C_CON_STB        (1 << 11)       /* Start byte mode (master) */
 141 #define OMAP_I2C_CON_MST        (1 << 10)       /* Master/slave mode */
 142 #define OMAP_I2C_CON_TRX        (1 << 9)        /* TX/RX mode (master only) */
 143 #define OMAP_I2C_CON_XA         (1 << 8)        /* Expand address */
 144 #define OMAP_I2C_CON_RM         (1 << 2)        /* Repeat mode (master only) */
 145 #define OMAP_I2C_CON_STP        (1 << 1)        /* Stop cond (master only) */
 146 #define OMAP_I2C_CON_STT        (1 << 0)        /* Start condition (master) */
 147
 148 /* I2C SCL time value when Master */
 149 #define OMAP_I2C_SCLL_HSSCLL    8
 150 #define OMAP_I2C_SCLH_HSSCLH    8
 151
 152 /* I2C System Test Register (OMAP_I2C_SYSTEST): */
 153 #define OMAP_I2C_SYSTEST_ST_EN          (1 << 15)       /* System test enable */
 154 #define OMAP_I2C_SYSTEST_FREE           (1 << 14)       /* Free running mode */
 155 #define OMAP_I2C_SYSTEST_TMODE_MASK     (3 << 12)       /* Test mode select */
 156 #define OMAP_I2C_SYSTEST_TMODE_SHIFT    (12)            /* Test mode select */
 157 /* Functional mode */
 158 #define OMAP_I2C_SYSTEST_SCL_I_FUNC     (1 << 8)        /* SCL line input value */
 159 #define OMAP_I2C_SYSTEST_SCL_O_FUNC     (1 << 7)        /* SCL line output value */
 160 #define OMAP_I2C_SYSTEST_SDA_I_FUNC     (1 << 6)        /* SDA line input value */
 161 #define OMAP_I2C_SYSTEST_SDA_O_FUNC     (1 << 5)        /* SDA line output value */
 162 /* SDA/SCL IO mode */
 163 #define OMAP_I2C_SYSTEST_SCL_I          (1 << 3)        /* SCL line sense in */
 164 #define OMAP_I2C_SYSTEST_SCL_O          (1 << 2)        /* SCL line drive out */
 165 #define OMAP_I2C_SYSTEST_SDA_I          (1 << 1)        /* SDA line sense in */
 166 #define OMAP_I2C_SYSTEST_SDA_O          (1 << 0)        /* SDA line drive out */
 167
 168 /* OCP_SYSSTATUS bit definitions */
 169 #define SYSS_RESETDONE_MASK             (1 << 0)
 170
 171 /* OCP_SYSCONFIG bit definitions */
 172 #define SYSC_CLOCKACTIVITY_MASK         (0x3 << 8)
 173 #define SYSC_SIDLEMODE_MASK             (0x3 << 3)
 174 #define SYSC_ENAWAKEUP_MASK             (1 << 2)
 175 #define SYSC_SOFTRESET_MASK             (1 << 1)
 176 #define SYSC_AUTOIDLE_MASK              (1 << 0)
 177
 178 #define SYSC_IDLEMODE_SMART             0x2
 179 #define SYSC_CLOCKACTIVITY_FCLK         0x2
 180
 181 /* Errata definitions */
 182 #define I2C_OMAP_ERRATA_I207            (1 << 0)
 183 #define I2C_OMAP_ERRATA_I462            (1 << 1)
 184
 185 #define OMAP_I2C_IP_V2_INTERRUPTS_MASK  0x6FFF
 186
 187 struct omap_i2c_dev {
 188         spinlock_t              lock;           /* IRQ synchronization */
 189         struct device           *dev;
 190         void __iomem            *base;          /* virtual */
 191         int                     irq;
 192         int                     reg_shift;      /* bit shift for I2C register addresses */
 193         struct completion       cmd_complete;
 194         struct resource         *ioarea;
 195         u32                     latency;        /* maximum mpu wkup latency */
 196         void                    (*set_mpu_wkup_lat)(struct device *dev,
 197                                                     long latency);
 198         u32                     speed;          /* Speed of bus in kHz */
 199         u32                     flags;
 200         u16                     scheme;
 201         u16                     cmd_err;
 202         u8                      *buf;
 203         u8                      *regs;
 204         size_t                  buf_len;
 205         struct i2c_adapter      adapter;
 206         u8                      threshold;
 207         u8                      fifo_size;      /* use as flag and value
 208                                                  * fifo_size==0 implies no fifo
 209                                                  * if set, should be trsh+1
 210                                                  */
 211         u32                     rev;
 212         unsigned                b_hw:1;         /* bad h/w fixes */
 213         unsigned                bb_valid:1;     /* true when BB-bit reflects
 214                                                  * the I2C bus state
 215                                                  */
 216         unsigned                receiver:1;     /* true when we're in receiver mode */
 217         u16                     iestate;        /* Saved interrupt register */
 218         u16                     pscstate;
 219         u16                     scllstate;
 220         u16                     sclhstate;
 221         u16                     syscstate;
 222         u16                     westate;
 223         u16                     errata;
 224 };
 225
 226 static const u8 reg_map_ip_v1[] = {
 227         [OMAP_I2C_REV_REG] = 0x00,
 228         [OMAP_I2C_IE_REG] = 0x01,
 229         [OMAP_I2C_STAT_REG] = 0x02,
 230         [OMAP_I2C_IV_REG] = 0x03,
 231         [OMAP_I2C_WE_REG] = 0x03,
 232         [OMAP_I2C_SYSS_REG] = 0x04,
 233         [OMAP_I2C_BUF_REG] = 0x05,
 234         [OMAP_I2C_CNT_REG] = 0x06,
 235         [OMAP_I2C_DATA_REG] = 0x07,
 236         [OMAP_I2C_SYSC_REG] = 0x08,
 237         [OMAP_I2C_CON_REG] = 0x09,
 238         [OMAP_I2C_OA_REG] = 0x0a,
 239         [OMAP_I2C_SA_REG] = 0x0b,
 240         [OMAP_I2C_PSC_REG] = 0x0c,
 241         [OMAP_I2C_SCLL_REG] = 0x0d,
 242         [OMAP_I2C_SCLH_REG] = 0x0e,
 243         [OMAP_I2C_SYSTEST_REG] = 0x0f,
 244         [OMAP_I2C_BUFSTAT_REG] = 0x10,
 245 };
 246
 247 static const u8 reg_map_ip_v2[] = {
 248         [OMAP_I2C_REV_REG] = 0x04,
 249         [OMAP_I2C_IE_REG] = 0x2c,
 250         [OMAP_I2C_STAT_REG] = 0x28,
 251         [OMAP_I2C_IV_REG] = 0x34,
 252         [OMAP_I2C_WE_REG] = 0x34,
 253         [OMAP_I2C_SYSS_REG] = 0x90,
 254         [OMAP_I2C_BUF_REG] = 0x94,
 255         [OMAP_I2C_CNT_REG] = 0x98,
 256         [OMAP_I2C_DATA_REG] = 0x9c,
 257         [OMAP_I2C_SYSC_REG] = 0x10,
 258         [OMAP_I2C_CON_REG] = 0xa4,
 259         [OMAP_I2C_OA_REG] = 0xa8,
 260         [OMAP_I2C_SA_REG] = 0xac,
 261         [OMAP_I2C_PSC_REG] = 0xb0,
 262         [OMAP_I2C_SCLL_REG] = 0xb4,
 263         [OMAP_I2C_SCLH_REG] = 0xb8,
 264         [OMAP_I2C_SYSTEST_REG] = 0xbC,
 265         [OMAP_I2C_BUFSTAT_REG] = 0xc0,
 266         [OMAP_I2C_IP_V2_REVNB_LO] = 0x00,
 267         [OMAP_I2C_IP_V2_REVNB_HI] = 0x04,
 268         [OMAP_I2C_IP_V2_IRQSTATUS_RAW] = 0x24,
 269         [OMAP_I2C_IP_V2_IRQENABLE_SET] = 0x2c,
 270         [OMAP_I2C_IP_V2_IRQENABLE_CLR] = 0x30,
 271 };
 272
 273 static inline void omap_i2c_write_reg(struct omap_i2c_dev *omap,
 274                                       int reg, u16 val)
 275 {
 276         writew_relaxed(val, omap->base +
 277                         (omap->regs[reg] << omap->reg_shift));
 278 }
 279
 280 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *omap, int reg)
 281 {
 282         return readw_relaxed(omap->base +
 283                                 (omap->regs[reg] << omap->reg_shift));
 284 }
 285
 286 static void __omap_i2c_init(struct omap_i2c_dev *omap)
 287 {
 288
 289         omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
 290
 291         /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
 292         omap_i2c_write_reg(omap, OMAP_I2C_PSC_REG, omap->pscstate);
 293
 294         /* SCL low and high time values */
 295         omap_i2c_write_reg(omap, OMAP_I2C_SCLL_REG, omap->scllstate);
 296         omap_i2c_write_reg(omap, OMAP_I2C_SCLH_REG, omap->sclhstate);
 297         if (omap->rev >= OMAP_I2C_REV_ON_3430_3530)
 298                 omap_i2c_write_reg(omap, OMAP_I2C_WE_REG, omap->westate);
 299
 300         /* Take the I2C module out of reset: */
 301         omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 302
 303         /*
 304          * NOTE: right after setting CON_EN, STAT_BB could be 0 while the
 305          * bus is busy. It will be changed to 1 on the next IP FCLK clock.
 306          * udelay(1) will be enough to fix that.
 307          */
 308
 309         /*
 310          * Don't write to this register if the IE state is 0 as it can
 311          * cause deadlock.
 312          */
 313         if (omap->iestate)
 314                 omap_i2c_write_reg(omap, OMAP_I2C_IE_REG, omap->iestate);
 315 }
 316
 317 static int omap_i2c_reset(struct omap_i2c_dev *omap)
 318 {
 319         unsigned long timeout;
 320         u16 sysc;
 321
 322         if (omap->rev >= OMAP_I2C_OMAP1_REV_2) {
 323                 sysc = omap_i2c_read_reg(omap, OMAP_I2C_SYSC_REG);
 324
 325                 /* Disable I2C controller before soft reset */
 326                 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG,
 327                         omap_i2c_read_reg(omap, OMAP_I2C_CON_REG) &
 328                                 ~(OMAP_I2C_CON_EN));
 329
 330                 omap_i2c_write_reg(omap, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK);
 331                 /* For some reason we need to set the EN bit before the
 332                  * reset done bit gets set. */
 333                 timeout = jiffies + OMAP_I2C_TIMEOUT;
 334                 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 335                 while (!(omap_i2c_read_reg(omap, OMAP_I2C_SYSS_REG) &
 336                          SYSS_RESETDONE_MASK)) {
 337                         if (time_after(jiffies, timeout)) {
 338                                 dev_warn(omap->dev, "timeout waiting "
 339                                                 "for controller reset\n");
 340                                 return -ETIMEDOUT;
 341                         }
 342                         msleep(1);
 343                 }
 344
 345                 /* SYSC register is cleared by the reset; rewrite it */
 346                 omap_i2c_write_reg(omap, OMAP_I2C_SYSC_REG, sysc);
 347
 348                 if (omap->rev > OMAP_I2C_REV_ON_3430_3530) {
 349                         /* Schedule I2C-bus monitoring on the next transfer */
 350                         omap->bb_valid = 0;
 351                 }
 352         }
 353
 354         return 0;
 355 }
 356
 357 static int omap_i2c_init(struct omap_i2c_dev *omap)
 358 {
 359         u16 psc = 0, scll = 0, sclh = 0;
 360         u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
 361         unsigned long fclk_rate = 12000000;
 362         unsigned long internal_clk = 0;
 363         struct clk *fclk;
 364
 365         if (omap->rev >= OMAP_I2C_REV_ON_3430_3530) {
 366                 /*
 367                  * Enabling all wakup sources to stop I2C freezing on
 368                  * WFI instruction.
 369                  * REVISIT: Some wkup sources might not be needed.
 370                  */
 371                 omap->westate = OMAP_I2C_WE_ALL;
 372         }
 373
 374         if (omap->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
 375                 /*
 376                  * The I2C functional clock is the armxor_ck, so there's
 377                  * no need to get "armxor_ck" separately.  Now, if OMAP2420
 378                  * always returns 12MHz for the functional clock, we can
 379                  * do this bit unconditionally.
 380                  */
 381                 fclk = clk_get(omap->dev, "fck");
 382                 fclk_rate = clk_get_rate(fclk);
 383                 clk_put(fclk);
 384
 385                 /* TRM for 5912 says the I2C clock must be prescaled to be
 386                  * between 7 - 12 MHz. The XOR input clock is typically
 387                  * 12, 13 or 19.2 MHz. So we should have code that produces:
 388                  *
 389                  * XOR MHz      Divider         Prescaler
 390                  * 12           1               0
 391                  * 13           2               1
 392                  * 19.2         2               1
 393                  */
 394                 if (fclk_rate > 12000000)
 395                         psc = fclk_rate / 12000000;
 396         }
 397
 398         if (!(omap->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
 399
 400                 /*
 401                  * HSI2C controller internal clk rate should be 19.2 Mhz for
 402                  * HS and for all modes on 2430. On 34xx we can use lower rate
 403                  * to get longer filter period for better noise suppression.
 404                  * The filter is iclk (fclk for HS) period.
 405                  */
 406                 if (omap->speed > 400 ||
 407                                omap->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
 408                         internal_clk = 19200;
 409                 else if (omap->speed > 100)
 410                         internal_clk = 9600;
 411                 else
 412                         internal_clk = 4000;
 413                 fclk = clk_get(omap->dev, "fck");
 414                 fclk_rate = clk_get_rate(fclk) / 1000;
 415                 clk_put(fclk);
 416
 417                 /* Compute prescaler divisor */
 418                 psc = fclk_rate / internal_clk;
 419                 psc = psc - 1;
 420
 421                 /* If configured for High Speed */
 422                 if (omap->speed > 400) {
 423                         unsigned long scl;
 424
 425                         /* For first phase of HS mode */
 426                         scl = internal_clk / 400;
 427                         fsscll = scl - (scl / 3) - 7;
 428                         fssclh = (scl / 3) - 5;
 429
 430                         /* For second phase of HS mode */
 431                         scl = fclk_rate / omap->speed;
 432                         hsscll = scl - (scl / 3) - 7;
 433                         hssclh = (scl / 3) - 5;
 434                 } else if (omap->speed > 100) {
 435                         unsigned long scl;
 436
 437                         /* Fast mode */
 438                         scl = internal_clk / omap->speed;
 439                         fsscll = scl - (scl / 3) - 7;
 440                         fssclh = (scl / 3) - 5;
 441                 } else {
 442                         /* Standard mode */
 443                         fsscll = internal_clk / (omap->speed * 2) - 7;
 444                         fssclh = internal_clk / (omap->speed * 2) - 5;
 445                 }
 446                 scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
 447                 sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
 448         } else {
 449                 /* Program desired operating rate */
 450                 fclk_rate /= (psc + 1) * 1000;
 451                 if (psc > 2)
 452                         psc = 2;
 453                 scll = fclk_rate / (omap->speed * 2) - 7 + psc;
 454                 sclh = fclk_rate / (omap->speed * 2) - 7 + psc;
 455         }
 456
 457         omap->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
 458                         OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
 459                         OMAP_I2C_IE_AL)  | ((omap->fifo_size) ?
 460                                 (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
 461
 462         omap->pscstate = psc;
 463         omap->scllstate = scll;
 464         omap->sclhstate = sclh;
 465
 466         if (omap->rev <= OMAP_I2C_REV_ON_3430_3530) {
 467                 /* Not implemented */
 468                 omap->bb_valid = 1;
 469         }
 470
 471         __omap_i2c_init(omap);
 472
 473         return 0;
 474 }
 475
 476 /*
 477  * Waiting on Bus Busy
 478  */
 479 static int omap_i2c_wait_for_bb(struct omap_i2c_dev *omap)
 480 {
 481         unsigned long timeout;
 482
 483         timeout = jiffies + OMAP_I2C_TIMEOUT;
 484         while (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
 485                 if (time_after(jiffies, timeout))
 486                         return i2c_recover_bus(&omap->adapter);
 487                 msleep(1);
 488         }
 489
 490         return 0;
 491 }
 492
 493 /*
 494  * Wait while BB-bit doesn't reflect the I2C bus state
 495  *
 496  * In a multimaster environment, after IP software reset, BB-bit value doesn't
 497  * correspond to the current bus state. It may happen what BB-bit will be 0,
 498  * while the bus is busy due to another I2C master activity.
 499  * Here are BB-bit values after reset:
 500  *     SDA   SCL   BB   NOTES
 501  *       0     0    0   1, 2
 502  *       1     0    0   1, 2
 503  *       0     1    1
 504  *       1     1    0   3
 505  * Later, if IP detect SDA=0 and SCL=1 (ACK) or SDA 1->0 while SCL=1 (START)
 506  * combinations on the bus, it set BB-bit to 1.
 507  * If IP detect SDA 0->1 while SCL=1 (STOP) combination on the bus,
 508  * it set BB-bit to 0 and BF to 1.
 509  * BB and BF bits correctly tracks the bus state while IP is suspended
 510  * BB bit became valid on the next FCLK clock after CON_EN bit set
 511  *
 512  * NOTES:
 513  * 1. Any transfer started when BB=0 and bus is busy wouldn't be
 514  *    completed by IP and results in controller timeout.
 515  * 2. Any transfer started when BB=0 and SCL=0 results in IP
 516  *    starting to drive SDA low. In that case IP corrupt data
 517  *    on the bus.
 518  * 3. Any transfer started in the middle of another master's transfer
 519  *    results in unpredictable results and data corruption
 520  */
 521 static int omap_i2c_wait_for_bb_valid(struct omap_i2c_dev *omap)
 522 {
 523         unsigned long bus_free_timeout = 0;
 524         unsigned long timeout;
 525         int bus_free = 0;
 526         u16 stat, systest;
 527
 528         if (omap->bb_valid)
 529                 return 0;
 530
 531         timeout = jiffies + OMAP_I2C_TIMEOUT;
 532         while (1) {
 533                 stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
 534                 /*
 535                  * We will see BB or BF event in a case IP had detected any
 536                  * activity on the I2C bus. Now IP correctly tracks the bus
 537                  * state. BB-bit value is valid.
 538                  */
 539                 if (stat & (OMAP_I2C_STAT_BB | OMAP_I2C_STAT_BF))
 540                         break;
 541
 542                 /*
 543                  * Otherwise, we must look signals on the bus to make
 544                  * the right decision.
 545                  */
 546                 systest = omap_i2c_read_reg(omap, OMAP_I2C_SYSTEST_REG);
 547                 if ((systest & OMAP_I2C_SYSTEST_SCL_I_FUNC) &&
 548                     (systest & OMAP_I2C_SYSTEST_SDA_I_FUNC)) {
 549                         if (!bus_free) {
 550                                 bus_free_timeout = jiffies +
 551                                         OMAP_I2C_BUS_FREE_TIMEOUT;
 552                                 bus_free = 1;
 553                         }
 554
 555                         /*
 556                          * SDA and SCL lines was high for 10 ms without bus
 557                          * activity detected. The bus is free. Consider
 558                          * BB-bit value is valid.
 559                          */
 560                         if (time_after(jiffies, bus_free_timeout))
 561                                 break;
 562                 } else {
 563                         bus_free = 0;
 564                 }
 565
 566                 if (time_after(jiffies, timeout)) {
 567                         dev_warn(omap->dev, "timeout waiting for bus ready\n");
 568                         return -ETIMEDOUT;
 569                 }
 570
 571                 msleep(1);
 572         }
 573
 574         omap->bb_valid = 1;
 575         return 0;
 576 }
 577
 578 static void omap_i2c_resize_fifo(struct omap_i2c_dev *omap, u8 size, bool is_rx)
 579 {
 580         u16             buf;
 581
 582         if (omap->flags & OMAP_I2C_FLAG_NO_FIFO)
 583                 return;
 584
 585         /*
 586          * Set up notification threshold based on message size. We're doing
 587          * this to try and avoid draining feature as much as possible. Whenever
 588          * we have big messages to transfer (bigger than our total fifo size)
 589          * then we might use draining feature to transfer the remaining bytes.
 590          */
 591
 592         omap->threshold = clamp(size, (u8) 1, omap->fifo_size);
 593
 594         buf = omap_i2c_read_reg(omap, OMAP_I2C_BUF_REG);
 595
 596         if (is_rx) {
 597                 /* Clear RX Threshold */
 598                 buf &= ~(0x3f << 8);
 599                 buf |= ((omap->threshold - 1) << 8) | OMAP_I2C_BUF_RXFIF_CLR;
 600         } else {
 601                 /* Clear TX Threshold */
 602                 buf &= ~0x3f;
 603                 buf |= (omap->threshold - 1) | OMAP_I2C_BUF_TXFIF_CLR;
 604         }
 605
 606         omap_i2c_write_reg(omap, OMAP_I2C_BUF_REG, buf);
 607
 608         if (omap->rev < OMAP_I2C_REV_ON_3630)
 609                 omap->b_hw = 1; /* Enable hardware fixes */
 610
 611         /* calculate wakeup latency constraint for MPU */
 612         if (omap->set_mpu_wkup_lat != NULL)
 613                 omap->latency = (1000000 * omap->threshold) /
 614                         (1000 * omap->speed / 8);
 615 }
 616
 617 /*
 618  * Low level master read/write transaction.
 619  */
 620 static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 621                              struct i2c_msg *msg, int stop)
 622 {
 623         struct omap_i2c_dev *omap = i2c_get_adapdata(adap);
 624         unsigned long timeout;
 625         u16 w;
 626
 627         dev_dbg(omap->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
 628                 msg->addr, msg->len, msg->flags, stop);
 629
 630         if (msg->len == 0)
 631                 return -EINVAL;
 632
 633         omap->receiver = !!(msg->flags & I2C_M_RD);
 634         omap_i2c_resize_fifo(omap, msg->len, omap->receiver);
 635
 636         omap_i2c_write_reg(omap, OMAP_I2C_SA_REG, msg->addr);
 637
 638         /* REVISIT: Could the STB bit of I2C_CON be used with probing? */
 639         omap->buf = msg->buf;
 640         omap->buf_len = msg->len;
 641
 642         /* make sure writes to omap->buf_len are ordered */
 643         barrier();
 644
 645         omap_i2c_write_reg(omap, OMAP_I2C_CNT_REG, omap->buf_len);
 646
 647         /* Clear the FIFO Buffers */
 648         w = omap_i2c_read_reg(omap, OMAP_I2C_BUF_REG);
 649         w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
 650         omap_i2c_write_reg(omap, OMAP_I2C_BUF_REG, w);
 651
 652         reinit_completion(&omap->cmd_complete);
 653         omap->cmd_err = 0;
 654
 655         w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
 656
 657         /* High speed configuration */
 658         if (omap->speed > 400)
 659                 w |= OMAP_I2C_CON_OPMODE_HS;
 660
 661         if (msg->flags & I2C_M_STOP)
 662                 stop = 1;
 663         if (msg->flags & I2C_M_TEN)
 664                 w |= OMAP_I2C_CON_XA;
 665         if (!(msg->flags & I2C_M_RD))
 666                 w |= OMAP_I2C_CON_TRX;
 667
 668         if (!omap->b_hw && stop)
 669                 w |= OMAP_I2C_CON_STP;
 670         /*
 671          * NOTE: STAT_BB bit could became 1 here if another master occupy
 672          * the bus. IP successfully complete transfer when the bus will be
 673          * free again (BB reset to 0).
 674          */
 675         omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w);
 676
 677         /*
 678          * Don't write stt and stp together on some hardware.
 679          */
 680         if (omap->b_hw && stop) {
 681                 unsigned long delay = jiffies + OMAP_I2C_TIMEOUT;
 682                 u16 con = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG);
 683                 while (con & OMAP_I2C_CON_STT) {
 684                         con = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG);
 685
 686                         /* Let the user know if i2c is in a bad state */
 687                         if (time_after(jiffies, delay)) {
 688                                 dev_err(omap->dev, "controller timed out "
 689                                 "waiting for start condition to finish\n");
 690                                 return -ETIMEDOUT;
 691                         }
 692                         cpu_relax();
 693                 }
 694
 695                 w |= OMAP_I2C_CON_STP;
 696                 w &= ~OMAP_I2C_CON_STT;
 697                 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w);
 698         }
 699
 700         /*
 701          * REVISIT: We should abort the transfer on signals, but the bus goes
 702          * into arbitration and we're currently unable to recover from it.
 703          */
 704         timeout = wait_for_completion_timeout(&omap->cmd_complete,
 705                                                 OMAP_I2C_TIMEOUT);
 706         if (timeout == 0) {
 707                 dev_err(omap->dev, "controller timed out\n");
 708                 omap_i2c_reset(omap);
 709                 __omap_i2c_init(omap);
 710                 return -ETIMEDOUT;
 711         }
 712
 713         if (likely(!omap->cmd_err))
 714                 return 0;
 715
 716         /* We have an error */
 717         if (omap->cmd_err & (OMAP_I2C_STAT_ROVR | OMAP_I2C_STAT_XUDF)) {
 718                 omap_i2c_reset(omap);
 719                 __omap_i2c_init(omap);
 720                 return -EIO;
 721         }
 722
 723         if (omap->cmd_err & OMAP_I2C_STAT_AL)
 724                 return -EAGAIN;
 725
 726         if (omap->cmd_err & OMAP_I2C_STAT_NACK) {
 727                 if (msg->flags & I2C_M_IGNORE_NAK)
 728                         return 0;
 729
 730                 w = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG);
 731                 w |= OMAP_I2C_CON_STP;
 732                 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w);
 733                 return -EREMOTEIO;
 734         }
 735         return -EIO;
 736 }
 737
 738
 739 /*
 740  * Prepare controller for a transaction and call omap_i2c_xfer_msg
 741  * to do the work during IRQ processing.
 742  */
 743 static int
 744 omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 745 {
 746         struct omap_i2c_dev *omap = i2c_get_adapdata(adap);
 747         int i;
 748         int r;
 749
 750         r = pm_runtime_get_sync(omap->dev);
 751         if (r < 0)
 752                 goto out;
 753
 754         r = omap_i2c_wait_for_bb_valid(omap);
 755         if (r < 0)
 756                 goto out;
 757
 758         r = omap_i2c_wait_for_bb(omap);
 759         if (r < 0)
 760                 goto out;
 761
 762         if (omap->set_mpu_wkup_lat != NULL)
 763                 omap->set_mpu_wkup_lat(omap->dev, omap->latency);
 764
 765         for (i = 0; i < num; i++) {
 766                 r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
 767                 if (r != 0)
 768                         break;
 769         }
 770
 771         if (r == 0)
 772                 r = num;
 773
 774         omap_i2c_wait_for_bb(omap);
 775
 776         if (omap->set_mpu_wkup_lat != NULL)
 777                 omap->set_mpu_wkup_lat(omap->dev, -1);
 778
 779 out:
 780         pm_runtime_mark_last_busy(omap->dev);
 781         pm_runtime_put_autosuspend(omap->dev);
 782         return r;
 783 }
 784
 785 static u32
 786 omap_i2c_func(struct i2c_adapter *adap)
 787 {
 788         return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
 789                I2C_FUNC_PROTOCOL_MANGLING;
 790 }
 791
 792 static inline void
 793 omap_i2c_complete_cmd(struct omap_i2c_dev *omap, u16 err)
 794 {
 795         omap->cmd_err |= err;
 796         complete(&omap->cmd_complete);
 797 }
 798
 799 static inline void
 800 omap_i2c_ack_stat(struct omap_i2c_dev *omap, u16 stat)
 801 {
 802         omap_i2c_write_reg(omap, OMAP_I2C_STAT_REG, stat);
 803 }
 804
 805 static inline void i2c_omap_errata_i207(struct omap_i2c_dev *omap, u16 stat)
 806 {
 807         /*
 808          * I2C Errata(Errata Nos. OMAP2: 1.67, OMAP3: 1.8)
 809          * Not applicable for OMAP4.
 810          * Under certain rare conditions, RDR could be set again
 811          * when the bus is busy, then ignore the interrupt and
 812          * clear the interrupt.
 813          */
 814         if (stat & OMAP_I2C_STAT_RDR) {
 815                 /* Step 1: If RDR is set, clear it */
 816                 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR);
 817
 818                 /* Step 2: */
 819                 if (!(omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG)
 820                                                 & OMAP_I2C_STAT_BB)) {
 821
 822                         /* Step 3: */
 823                         if (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG)
 824                                                 & OMAP_I2C_STAT_RDR) {
 825                                 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR);
 826                                 dev_dbg(omap->dev, "RDR when bus is busy.\n");
 827                         }
 828
 829                 }
 830         }
 831 }
 832
 833 /* rev1 devices are apparently only on some 15xx */
 834 #ifdef CONFIG_ARCH_OMAP15XX
 835
 836 static irqreturn_t
 837 omap_i2c_omap1_isr(int this_irq, void *dev_id)
 838 {
 839         struct omap_i2c_dev *omap = dev_id;
 840         u16 iv, w;
 841
 842         if (pm_runtime_suspended(omap->dev))
 843                 return IRQ_NONE;
 844
 845         iv = omap_i2c_read_reg(omap, OMAP_I2C_IV_REG);
 846         switch (iv) {
 847         case 0x00:      /* None */
 848                 break;
 849         case 0x01:      /* Arbitration lost */
 850                 dev_err(omap->dev, "Arbitration lost\n");
 851                 omap_i2c_complete_cmd(omap, OMAP_I2C_STAT_AL);
 852                 break;
 853         case 0x02:      /* No acknowledgement */
 854                 omap_i2c_complete_cmd(omap, OMAP_I2C_STAT_NACK);
 855                 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP);
 856                 break;
 857         case 0x03:      /* Register access ready */
 858                 omap_i2c_complete_cmd(omap, 0);
 859                 break;
 860         case 0x04:      /* Receive data ready */
 861                 if (omap->buf_len) {
 862                         w = omap_i2c_read_reg(omap, OMAP_I2C_DATA_REG);
 863                         *omap->buf++ = w;
 864                         omap->buf_len--;
 865                         if (omap->buf_len) {
 866                                 *omap->buf++ = w >> 8;
 867                                 omap->buf_len--;
 868                         }
 869                 } else
 870                         dev_err(omap->dev, "RRDY IRQ while no data requested\n");
 871                 break;
 872         case 0x05:      /* Transmit data ready */
 873                 if (omap->buf_len) {
 874                         w = *omap->buf++;
 875                         omap->buf_len--;
 876                         if (omap->buf_len) {
 877                                 w |= *omap->buf++ << 8;
 878                                 omap->buf_len--;
 879                         }
 880                         omap_i2c_write_reg(omap, OMAP_I2C_DATA_REG, w);
 881                 } else
 882                         dev_err(omap->dev, "XRDY IRQ while no data to send\n");
 883                 break;
 884         default:
 885                 return IRQ_NONE;
 886         }
 887
 888         return IRQ_HANDLED;
 889 }
 890 #else
 891 #define omap_i2c_omap1_isr              NULL
 892 #endif
 893
 894 /*
 895  * OMAP3430 Errata i462: When an XRDY/XDR is hit, wait for XUDF before writing
 896  * data to DATA_REG. Otherwise some data bytes can be lost while transferring
 897  * them from the memory to the I2C interface.
 898  */
 899 static int errata_omap3_i462(struct omap_i2c_dev *omap)
 900 {
 901         unsigned long timeout = 10000;
 902         u16 stat;
 903
 904         do {
 905                 stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
 906                 if (stat & OMAP_I2C_STAT_XUDF)
 907                         break;
 908
 909                 if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
 910                         omap_i2c_ack_stat(omap, (OMAP_I2C_STAT_XRDY |
 911                                                         OMAP_I2C_STAT_XDR));
 912                         if (stat & OMAP_I2C_STAT_NACK) {
 913                                 omap->cmd_err |= OMAP_I2C_STAT_NACK;
 914                                 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_NACK);
 915                         }
 916
 917                         if (stat & OMAP_I2C_STAT_AL) {
 918                                 dev_err(omap->dev, "Arbitration lost\n");
 919                                 omap->cmd_err |= OMAP_I2C_STAT_AL;
 920                                 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_AL);
 921                         }
 922
 923                         return -EIO;
 924                 }
 925
 926                 cpu_relax();
 927         } while (--timeout);
 928
 929         if (!timeout) {
 930                 dev_err(omap->dev, "timeout waiting on XUDF bit\n");
 931                 return 0;
 932         }
 933
 934         return 0;
 935 }
 936
 937 static void omap_i2c_receive_data(struct omap_i2c_dev *omap, u8 num_bytes,
 938                 bool is_rdr)
 939 {
 940         u16             w;
 941
 942         while (num_bytes--) {
 943                 w = omap_i2c_read_reg(omap, OMAP_I2C_DATA_REG);
 944                 *omap->buf++ = w;
 945                 omap->buf_len--;
 946
 947                 /*
 948                  * Data reg in 2430, omap3 and
 949                  * omap4 is 8 bit wide
 950                  */
 951                 if (omap->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) {
 952                         *omap->buf++ = w >> 8;
 953                         omap->buf_len--;
 954                 }
 955         }
 956 }
 957
 958 static int omap_i2c_transmit_data(struct omap_i2c_dev *omap, u8 num_bytes,
 959                 bool is_xdr)
 960 {
 961         u16             w;
 962
 963         while (num_bytes--) {
 964                 w = *omap->buf++;
 965                 omap->buf_len--;
 966
 967                 /*
 968                  * Data reg in 2430, omap3 and
 969                  * omap4 is 8 bit wide
 970                  */
 971                 if (omap->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) {
 972                         w |= *omap->buf++ << 8;
 973                         omap->buf_len--;
 974                 }
 975
 976                 if (omap->errata & I2C_OMAP_ERRATA_I462) {
 977                         int ret;
 978
 979                         ret = errata_omap3_i462(omap);
 980                         if (ret < 0)
 981                                 return ret;
 982                 }
 983
 984                 omap_i2c_write_reg(omap, OMAP_I2C_DATA_REG, w);
 985         }
 986
 987         return 0;
 988 }
 989
 990 static irqreturn_t
 991 omap_i2c_isr(int irq, void *dev_id)
 992 {
 993         struct omap_i2c_dev *omap = dev_id;
 994         irqreturn_t ret = IRQ_HANDLED;
 995         u16 mask;
 996         u16 stat;
 997
 998         spin_lock(&omap->lock);
 999         mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
1000         stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
1001
1002         if (stat & mask)
1003                 ret = IRQ_WAKE_THREAD;
1004
1005         spin_unlock(&omap->lock);
1006
1007         return ret;
1008 }
1009
1010 static irqreturn_t
1011 omap_i2c_isr_thread(int this_irq, void *dev_id)
1012 {
1013         struct omap_i2c_dev *omap = dev_id;
1014         unsigned long flags;
1015         u16 bits;
1016         u16 stat;
1017         int err = 0, count = 0;
1018
1019         spin_lock_irqsave(&omap->lock, flags);
1020         do {
1021                 bits = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
1022                 stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
1023                 stat &= bits;
1024
1025                 /* If we're in receiver mode, ignore XDR/XRDY */
1026                 if (omap->receiver)
1027                         stat &= ~(OMAP_I2C_STAT_XDR | OMAP_I2C_STAT_XRDY);
1028                 else
1029                         stat &= ~(OMAP_I2C_STAT_RDR | OMAP_I2C_STAT_RRDY);
1030
1031                 if (!stat) {
1032                         /* my work here is done */
1033                         goto out;
1034                 }
1035
1036                 dev_dbg(omap->dev, "IRQ (ISR = 0x%04x)\n", stat);
1037                 if (count++ == 100) {
1038                         dev_warn(omap->dev, "Too much work in one IRQ\n");
1039                         break;
1040                 }
1041
1042                 if (stat & OMAP_I2C_STAT_NACK) {
1043                         err |= OMAP_I2C_STAT_NACK;
1044                         omap_i2c_ack_stat(omap, OMAP_I2C_STAT_NACK);
1045                 }
1046
1047                 if (stat & OMAP_I2C_STAT_AL) {
1048                         dev_err(omap->dev, "Arbitration lost\n");
1049                         err |= OMAP_I2C_STAT_AL;
1050                         omap_i2c_ack_stat(omap, OMAP_I2C_STAT_AL);
1051                 }
1052
1053                 /*
1054                  * ProDB0017052: Clear ARDY bit twice
1055                  */
1056                 if (stat & OMAP_I2C_STAT_ARDY)
1057                         omap_i2c_ack_stat(omap, OMAP_I2C_STAT_ARDY);
1058
1059                 if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
1060                                         OMAP_I2C_STAT_AL)) {
1061                         omap_i2c_ack_stat(omap, (OMAP_I2C_STAT_RRDY |
1062                                                 OMAP_I2C_STAT_RDR |
1063                                                 OMAP_I2C_STAT_XRDY |
1064                                                 OMAP_I2C_STAT_XDR |
1065                                                 OMAP_I2C_STAT_ARDY));
1066                         break;
1067                 }
1068
1069                 if (stat & OMAP_I2C_STAT_RDR) {
1070                         u8 num_bytes = 1;
1071
1072                         if (omap->fifo_size)
1073                                 num_bytes = omap->buf_len;
1074
1075                         if (omap->errata & I2C_OMAP_ERRATA_I207) {
1076                                 i2c_omap_errata_i207(omap, stat);
1077                                 num_bytes = (omap_i2c_read_reg(omap,
1078                                         OMAP_I2C_BUFSTAT_REG) >> 8) & 0x3F;
1079                         }
1080
1081                         omap_i2c_receive_data(omap, num_bytes, true);
1082                         omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR);
1083                         continue;
1084                 }
1085
1086                 if (stat & OMAP_I2C_STAT_RRDY) {
1087                         u8 num_bytes = 1;
1088
1089                         if (omap->threshold)
1090                                 num_bytes = omap->threshold;
1091
1092                         omap_i2c_receive_data(omap, num_bytes, false);
1093                         omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RRDY);
1094                         continue;
1095                 }
1096
1097                 if (stat & OMAP_I2C_STAT_XDR) {
1098                         u8 num_bytes = 1;
1099                         int ret;
1100
1101                         if (omap->fifo_size)
1102                                 num_bytes = omap->buf_len;
1103
1104                         ret = omap_i2c_transmit_data(omap, num_bytes, true);
1105                         if (ret < 0)
1106                                 break;
1107
1108                         omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XDR);
1109                         continue;
1110                 }
1111
1112                 if (stat & OMAP_I2C_STAT_XRDY) {
1113                         u8 num_bytes = 1;
1114                         int ret;
1115
1116                         if (omap->threshold)
1117                                 num_bytes = omap->threshold;
1118
1119                         ret = omap_i2c_transmit_data(omap, num_bytes, false);
1120                         if (ret < 0)
1121                                 break;
1122
1123                         omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XRDY);
1124                         continue;
1125                 }
1126
1127                 if (stat & OMAP_I2C_STAT_ROVR) {
1128                         dev_err(omap->dev, "Receive overrun\n");
1129                         err |= OMAP_I2C_STAT_ROVR;
1130                         omap_i2c_ack_stat(omap, OMAP_I2C_STAT_ROVR);
1131                         break;
1132                 }
1133
1134                 if (stat & OMAP_I2C_STAT_XUDF) {
1135                         dev_err(omap->dev, "Transmit underflow\n");
1136                         err |= OMAP_I2C_STAT_XUDF;
1137                         omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XUDF);
1138                         break;
1139                 }
1140         } while (stat);
1141
1142         omap_i2c_complete_cmd(omap, err);
1143
1144 out:
1145         spin_unlock_irqrestore(&omap->lock, flags);
1146
1147         return IRQ_HANDLED;
1148 }
1149
1150 static const struct i2c_algorithm omap_i2c_algo = {
1151         .master_xfer    = omap_i2c_xfer,
1152         .functionality  = omap_i2c_func,
1153 };
1154
1155 #ifdef CONFIG_OF
1156 static struct omap_i2c_bus_platform_data omap2420_pdata = {
1157         .rev = OMAP_I2C_IP_VERSION_1,
1158         .flags = OMAP_I2C_FLAG_NO_FIFO |
1159                         OMAP_I2C_FLAG_SIMPLE_CLOCK |
1160                         OMAP_I2C_FLAG_16BIT_DATA_REG |
1161                         OMAP_I2C_FLAG_BUS_SHIFT_2,
1162 };
1163
1164 static struct omap_i2c_bus_platform_data omap2430_pdata = {
1165         .rev = OMAP_I2C_IP_VERSION_1,
1166         .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
1167                         OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
1168 };
1169
1170 static struct omap_i2c_bus_platform_data omap3_pdata = {
1171         .rev = OMAP_I2C_IP_VERSION_1,
1172         .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
1173 };
1174
1175 static struct omap_i2c_bus_platform_data omap4_pdata = {
1176         .rev = OMAP_I2C_IP_VERSION_2,
1177 };
1178
1179 static const struct of_device_id omap_i2c_of_match[] = {
1180         {
1181                 .compatible = "ti,omap4-i2c",
1182                 .data = &omap4_pdata,
1183         },
1184         {
1185                 .compatible = "ti,omap3-i2c",
1186                 .data = &omap3_pdata,
1187         },
1188         {
1189                 .compatible = "ti,omap2430-i2c",
1190                 .data = &omap2430_pdata,
1191         },
1192         {
1193                 .compatible = "ti,omap2420-i2c",
1194                 .data = &omap2420_pdata,
1195         },
1196         { },
1197 };
1198 MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
1199 #endif
1200
1201 #define OMAP_I2C_SCHEME(rev)            ((rev & 0xc000) >> 14)
1202
1203 #define OMAP_I2C_REV_SCHEME_0_MAJOR(rev) (rev >> 4)
1204 #define OMAP_I2C_REV_SCHEME_0_MINOR(rev) (rev & 0xf)
1205
1206 #define OMAP_I2C_REV_SCHEME_1_MAJOR(rev) ((rev & 0x0700) >> 7)
1207 #define OMAP_I2C_REV_SCHEME_1_MINOR(rev) (rev & 0x1f)
1208 #define OMAP_I2C_SCHEME_0               0
1209 #define OMAP_I2C_SCHEME_1               1
1210
1211 static int omap_i2c_get_scl(struct i2c_adapter *adap)
1212 {
1213         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
1214         u32 reg;
1215
1216         reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
1217
1218         return reg & OMAP_I2C_SYSTEST_SCL_I_FUNC;
1219 }
1220
1221 static int omap_i2c_get_sda(struct i2c_adapter *adap)
1222 {
1223         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
1224         u32 reg;
1225
1226         reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
1227
1228         return reg & OMAP_I2C_SYSTEST_SDA_I_FUNC;
1229 }
1230
1231 static void omap_i2c_set_scl(struct i2c_adapter *adap, int val)
1232 {
1233         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
1234         u32 reg;
1235
1236         reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
1237         if (val)
1238                 reg |= OMAP_I2C_SYSTEST_SCL_O;
1239         else
1240                 reg &= ~OMAP_I2C_SYSTEST_SCL_O;
1241         omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg);
1242 }
1243
1244 static void omap_i2c_prepare_recovery(struct i2c_adapter *adap)
1245 {
1246         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
1247         u32 reg;
1248
1249         reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
1250         /* enable test mode */
1251         reg |= OMAP_I2C_SYSTEST_ST_EN;
1252         /* select SDA/SCL IO mode */
1253         reg |= 3 << OMAP_I2C_SYSTEST_TMODE_SHIFT;
1254         /* set SCL to high-impedance state (reset value is 0) */
1255         reg |= OMAP_I2C_SYSTEST_SCL_O;
1256         /* set SDA to high-impedance state (reset value is 0) */
1257         reg |= OMAP_I2C_SYSTEST_SDA_O;
1258         omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg);
1259 }
1260
1261 static void omap_i2c_unprepare_recovery(struct i2c_adapter *adap)
1262 {
1263         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
1264         u32 reg;
1265
1266         reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
1267         /* restore reset values */
1268         reg &= ~OMAP_I2C_SYSTEST_ST_EN;
1269         reg &= ~OMAP_I2C_SYSTEST_TMODE_MASK;
1270         reg &= ~OMAP_I2C_SYSTEST_SCL_O;
1271         reg &= ~OMAP_I2C_SYSTEST_SDA_O;
1272         omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg);
1273 }
1274
1275 static struct i2c_bus_recovery_info omap_i2c_bus_recovery_info = {
1276         .get_scl                = omap_i2c_get_scl,
1277         .get_sda                = omap_i2c_get_sda,
1278         .set_scl                = omap_i2c_set_scl,
1279         .prepare_recovery       = omap_i2c_prepare_recovery,
1280         .unprepare_recovery     = omap_i2c_unprepare_recovery,
1281         .recover_bus            = i2c_generic_scl_recovery,
1282 };
1283
1284 static int
1285 omap_i2c_probe(struct platform_device *pdev)
1286 {
1287         struct omap_i2c_dev     *omap;
1288         struct i2c_adapter      *adap;
1289         struct resource         *mem;
1290         const struct omap_i2c_bus_platform_data *pdata =
1291                 dev_get_platdata(&pdev->dev);
1292         struct device_node      *node = pdev->dev.of_node;
1293         const struct of_device_id *match;
1294         int irq;
1295         int r;
1296         u32 rev;
1297         u16 minor, major;
1298
1299         irq = platform_get_irq(pdev, 0);
1300         if (irq < 0) {
1301                 dev_err(&pdev->dev, "no irq resource?\n");
1302                 return irq;
1303         }
1304
1305         omap = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL);
1306         if (!omap)
1307                 return -ENOMEM;
1308
1309         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1310         omap->base = devm_ioremap_resource(&pdev->dev, mem);
1311         if (IS_ERR(omap->base))
1312                 return PTR_ERR(omap->base);
1313
1314         match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
1315         if (match) {
1316                 u32 freq = 100000; /* default to 100000 Hz */
1317
1318                 pdata = match->data;
1319                 omap->flags = pdata->flags;
1320
1321                 of_property_read_u32(node, "clock-frequency", &freq);
1322                 /* convert DT freq value in Hz into kHz for speed */
1323                 omap->speed = freq / 1000;
1324         } else if (pdata != NULL) {
1325                 omap->speed = pdata->clkrate;
1326                 omap->flags = pdata->flags;
1327                 omap->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
1328         }
1329
1330         omap->dev = &pdev->dev;
1331         omap->irq = irq;
1332
1333         spin_lock_init(&omap->lock);
1334
1335         platform_set_drvdata(pdev, omap);
1336         init_completion(&omap->cmd_complete);
1337
1338         omap->reg_shift = (omap->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
1339
1340         pm_runtime_enable(omap->dev);
1341         pm_runtime_set_autosuspend_delay(omap->dev, OMAP_I2C_PM_TIMEOUT);
1342         pm_runtime_use_autosuspend(omap->dev);
1343
1344         r = pm_runtime_get_sync(omap->dev);
1345         if (r < 0)
1346                 goto err_free_mem;
1347
1348         /*
1349          * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
1350          * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset.
1351          * Also since the omap_i2c_read_reg uses reg_map_ip_* a
1352          * readw_relaxed is done.
1353          */
1354         rev = readw_relaxed(omap->base + 0x04);
1355
1356         omap->scheme = OMAP_I2C_SCHEME(rev);
1357         switch (omap->scheme) {
1358         case OMAP_I2C_SCHEME_0:
1359                 omap->regs = (u8 *)reg_map_ip_v1;
1360                 omap->rev = omap_i2c_read_reg(omap, OMAP_I2C_REV_REG);
1361                 minor = OMAP_I2C_REV_SCHEME_0_MAJOR(omap->rev);
1362                 major = OMAP_I2C_REV_SCHEME_0_MAJOR(omap->rev);
1363                 break;
1364         case OMAP_I2C_SCHEME_1:
1365                 /* FALLTHROUGH */
1366         default:
1367                 omap->regs = (u8 *)reg_map_ip_v2;
1368                 rev = (rev << 16) |
1369                         omap_i2c_read_reg(omap, OMAP_I2C_IP_V2_REVNB_LO);
1370                 minor = OMAP_I2C_REV_SCHEME_1_MINOR(rev);
1371                 major = OMAP_I2C_REV_SCHEME_1_MAJOR(rev);
1372                 omap->rev = rev;
1373         }
1374
1375         omap->errata = 0;
1376
1377         if (omap->rev >= OMAP_I2C_REV_ON_2430 &&
1378                         omap->rev < OMAP_I2C_REV_ON_4430_PLUS)
1379                 omap->errata |= I2C_OMAP_ERRATA_I207;
1380
1381         if (omap->rev <= OMAP_I2C_REV_ON_3430_3530)
1382                 omap->errata |= I2C_OMAP_ERRATA_I462;
1383
1384         if (!(omap->flags & OMAP_I2C_FLAG_NO_FIFO)) {
1385                 u16 s;
1386
1387                 /* Set up the fifo size - Get total size */
1388                 s = (omap_i2c_read_reg(omap, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3;
1389                 omap->fifo_size = 0x8 << s;
1390
1391                 /*
1392                  * Set up notification threshold as half the total available
1393                  * size. This is to ensure that we can handle the status on int
1394                  * call back latencies.
1395                  */
1396
1397                 omap->fifo_size = (omap->fifo_size / 2);
1398
1399                 if (omap->rev < OMAP_I2C_REV_ON_3630)
1400                         omap->b_hw = 1; /* Enable hardware fixes */
1401
1402                 /* calculate wakeup latency constraint for MPU */
1403                 if (omap->set_mpu_wkup_lat != NULL)
1404                         omap->latency = (1000000 * omap->fifo_size) /
1405                                        (1000 * omap->speed / 8);
1406         }
1407
1408         /* reset ASAP, clearing any IRQs */
1409         omap_i2c_init(omap);
1410
1411         if (omap->rev < OMAP_I2C_OMAP1_REV_2)
1412                 r = devm_request_irq(&pdev->dev, omap->irq, omap_i2c_omap1_isr,
1413                                 IRQF_NO_SUSPEND, pdev->name, omap);
1414         else
1415                 r = devm_request_threaded_irq(&pdev->dev, omap->irq,
1416                                 omap_i2c_isr, omap_i2c_isr_thread,
1417                                 IRQF_NO_SUSPEND | IRQF_ONESHOT,
1418                                 pdev->name, omap);
1419
1420         if (r) {
1421                 dev_err(omap->dev, "failure requesting irq %i\n", omap->irq);
1422                 goto err_unuse_clocks;
1423         }
1424
1425         adap = &omap->adapter;
1426         i2c_set_adapdata(adap, omap);
1427         adap->owner = THIS_MODULE;
1428         adap->class = I2C_CLASS_DEPRECATED;
1429         strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
1430         adap->algo = &omap_i2c_algo;
1431         adap->dev.parent = &pdev->dev;
1432         adap->dev.of_node = pdev->dev.of_node;
1433         adap->bus_recovery_info = &omap_i2c_bus_recovery_info;
1434
1435         /* i2c device drivers may be active on return from add_adapter() */
1436         adap->nr = pdev->id;
1437         r = i2c_add_numbered_adapter(adap);
1438         if (r) {
1439                 dev_err(omap->dev, "failure adding adapter\n");
1440                 goto err_unuse_clocks;
1441         }
1442
1443         dev_info(omap->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
1444                  major, minor, omap->speed);
1445
1446         pm_runtime_mark_last_busy(omap->dev);
1447         pm_runtime_put_autosuspend(omap->dev);
1448
1449         return 0;
1450
1451 err_unuse_clocks:
1452         omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
1453         pm_runtime_put(omap->dev);
1454         pm_runtime_disable(&pdev->dev);
1455 err_free_mem:
1456
1457         return r;
1458 }
1459
1460 static int omap_i2c_remove(struct platform_device *pdev)
1461 {
1462         struct omap_i2c_dev     *omap = platform_get_drvdata(pdev);
1463         int ret;
1464
1465         i2c_del_adapter(&omap->adapter);
1466         ret = pm_runtime_get_sync(&pdev->dev);
1467         if (ret < 0)
1468                 return ret;
1469
1470         omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
1471         pm_runtime_put_sync(&pdev->dev);
1472         pm_runtime_disable(&pdev->dev);
1473         return 0;
1474 }
1475
1476 #ifdef CONFIG_PM
1477 static int omap_i2c_runtime_suspend(struct device *dev)
1478 {
1479         struct omap_i2c_dev *omap = dev_get_drvdata(dev);
1480
1481         omap->iestate = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
1482
1483         if (omap->scheme == OMAP_I2C_SCHEME_0)
1484                 omap_i2c_write_reg(omap, OMAP_I2C_IE_REG, 0);
1485         else
1486                 omap_i2c_write_reg(omap, OMAP_I2C_IP_V2_IRQENABLE_CLR,
1487                                    OMAP_I2C_IP_V2_INTERRUPTS_MASK);
1488
1489         if (omap->rev < OMAP_I2C_OMAP1_REV_2) {
1490                 omap_i2c_read_reg(omap, OMAP_I2C_IV_REG); /* Read clears */
1491         } else {
1492                 omap_i2c_write_reg(omap, OMAP_I2C_STAT_REG, omap->iestate);
1493
1494                 /* Flush posted write */
1495                 omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
1496         }
1497
1498         pinctrl_pm_select_sleep_state(dev);
1499
1500         return 0;
1501 }
1502
1503 static int omap_i2c_runtime_resume(struct device *dev)
1504 {
1505         struct omap_i2c_dev *omap = dev_get_drvdata(dev);
1506
1507         pinctrl_pm_select_default_state(dev);
1508
1509         if (!omap->regs)
1510                 return 0;
1511
1512         __omap_i2c_init(omap);
1513
1514         return 0;
1515 }
1516
1517 static struct dev_pm_ops omap_i2c_pm_ops = {
1518         SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
1519                            omap_i2c_runtime_resume, NULL)
1520 };
1521 #define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
1522 #else
1523 #define OMAP_I2C_PM_OPS NULL
1524 #endif /* CONFIG_PM */
1525
1526 static struct platform_driver omap_i2c_driver = {
1527         .probe          = omap_i2c_probe,
1528         .remove         = omap_i2c_remove,
1529         .driver         = {
1530                 .name   = "omap_i2c",
1531                 .pm     = OMAP_I2C_PM_OPS,
1532                 .of_match_table = of_match_ptr(omap_i2c_of_match),
1533         },
1534 };
1535
1536 /* I2C may be needed to bring up other drivers */
1537 static int __init
1538 omap_i2c_init_driver(void)
1539 {
1540         return platform_driver_register(&omap_i2c_driver);
1541 }
1542 subsys_initcall(omap_i2c_init_driver);
1543
1544 static void __exit omap_i2c_exit_driver(void)
1545 {
1546         platform_driver_unregister(&omap_i2c_driver);
1547 }
1548 module_exit(omap_i2c_exit_driver);
1549
1550 MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
1551 MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
1552 MODULE_LICENSE("GPL");
1553 MODULE_ALIAS("platform:omap_i2c");