drivers/input/rmi4/rmi_driver.c

   1 /*
   2  * Copyright (c) 2011-2016 Synaptics Incorporated
   3  * Copyright (c) 2011 Unixphere
   4  *
   5  * This driver provides the core support for a single RMI4-based device.
   6  *
   7  * The RMI4 specification can be found here (URL split for line length):
   8  *
   9  * http://www.synaptics.com/sites/default/files/
  10  *      511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
  11  *
  12  * This program is free software; you can redistribute it and/or modify it
  13  * under the terms of the GNU General Public License version 2 as published by
  14  * the Free Software Foundation.
  15  */
  16
  17 #include <linux/bitmap.h>
  18 #include <linux/delay.h>
  19 #include <linux/fs.h>
  20 #include <linux/kconfig.h>
  21 #include <linux/pm.h>
  22 #include <linux/slab.h>
  23 #include <linux/of.h>
  24 #include <uapi/linux/input.h>
  25 #include <linux/rmi.h>
  26 #include "rmi_bus.h"
  27 #include "rmi_driver.h"
  28
  29 #define HAS_NONSTANDARD_PDT_MASK 0x40
  30 #define RMI4_MAX_PAGE 0xff
  31 #define RMI4_PAGE_SIZE 0x100
  32 #define RMI4_PAGE_MASK 0xFF00
  33
  34 #define RMI_DEVICE_RESET_CMD    0x01
  35 #define DEFAULT_RESET_DELAY_MS  100
  36
  37 static void rmi_free_function_list(struct rmi_device *rmi_dev)
  38 {
  39         struct rmi_function *fn, *tmp;
  40         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
  41
  42         data->f01_container = NULL;
  43
  44         /* Doing it in the reverse order so F01 will be removed last */
  45         list_for_each_entry_safe_reverse(fn, tmp,
  46                                          &data->function_list, node) {
  47                 list_del(&fn->node);
  48                 rmi_unregister_function(fn);
  49         }
  50 }
  51
  52 static int reset_one_function(struct rmi_function *fn)
  53 {
  54         struct rmi_function_handler *fh;
  55         int retval = 0;
  56
  57         if (!fn || !fn->dev.driver)
  58                 return 0;
  59
  60         fh = to_rmi_function_handler(fn->dev.driver);
  61         if (fh->reset) {
  62                 retval = fh->reset(fn);
  63                 if (retval < 0)
  64                         dev_err(&fn->dev, "Reset failed with code %d.\n",
  65                                 retval);
  66         }
  67
  68         return retval;
  69 }
  70
  71 static int configure_one_function(struct rmi_function *fn)
  72 {
  73         struct rmi_function_handler *fh;
  74         int retval = 0;
  75
  76         if (!fn || !fn->dev.driver)
  77                 return 0;
  78
  79         fh = to_rmi_function_handler(fn->dev.driver);
  80         if (fh->config) {
  81                 retval = fh->config(fn);
  82                 if (retval < 0)
  83                         dev_err(&fn->dev, "Config failed with code %d.\n",
  84                                 retval);
  85         }
  86
  87         return retval;
  88 }
  89
  90 static int rmi_driver_process_reset_requests(struct rmi_device *rmi_dev)
  91 {
  92         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
  93         struct rmi_function *entry;
  94         int retval;
  95
  96         list_for_each_entry(entry, &data->function_list, node) {
  97                 retval = reset_one_function(entry);
  98                 if (retval < 0)
  99                         return retval;
 100         }
 101
 102         return 0;
 103 }
 104
 105 static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev)
 106 {
 107         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 108         struct rmi_function *entry;
 109         int retval;
 110
 111         list_for_each_entry(entry, &data->function_list, node) {
 112                 retval = configure_one_function(entry);
 113                 if (retval < 0)
 114                         return retval;
 115         }
 116
 117         return 0;
 118 }
 119
 120 static void process_one_interrupt(struct rmi_driver_data *data,
 121                                   struct rmi_function *fn)
 122 {
 123         struct rmi_function_handler *fh;
 124
 125         if (!fn || !fn->dev.driver)
 126                 return;
 127
 128         fh = to_rmi_function_handler(fn->dev.driver);
 129         if (fh->attention) {
 130                 bitmap_and(data->fn_irq_bits, data->irq_status, fn->irq_mask,
 131                                 data->irq_count);
 132                 if (!bitmap_empty(data->fn_irq_bits, data->irq_count))
 133                         fh->attention(fn, data->fn_irq_bits);
 134         }
 135 }
 136
 137 int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
 138 {
 139         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 140         struct device *dev = &rmi_dev->dev;
 141         struct rmi_function *entry;
 142         int error;
 143
 144         if (!data)
 145                 return 0;
 146
 147         if (!rmi_dev->xport->attn_data) {
 148                 error = rmi_read_block(rmi_dev,
 149                                 data->f01_container->fd.data_base_addr + 1,
 150                                 data->irq_status, data->num_of_irq_regs);
 151                 if (error < 0) {
 152                         dev_err(dev, "Failed to read irqs, code=%d\n", error);
 153                         return error;
 154                 }
 155         }
 156
 157         mutex_lock(&data->irq_mutex);
 158         bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask,
 159                data->irq_count);
 160         /*
 161          * At this point, irq_status has all bits that are set in the
 162          * interrupt status register and are enabled.
 163          */
 164         mutex_unlock(&data->irq_mutex);
 165
 166         /*
 167          * It would be nice to be able to use irq_chip to handle these
 168          * nested IRQs.  Unfortunately, most of the current customers for
 169          * this driver are using older kernels (3.0.x) that don't support
 170          * the features required for that.  Once they've shifted to more
 171          * recent kernels (say, 3.3 and higher), this should be switched to
 172          * use irq_chip.
 173          */
 174         list_for_each_entry(entry, &data->function_list, node)
 175                 process_one_interrupt(data, entry);
 176
 177         if (data->input)
 178                 input_sync(data->input);
 179
 180         return 0;
 181 }
 182 EXPORT_SYMBOL_GPL(rmi_process_interrupt_requests);
 183
 184 static int suspend_one_function(struct rmi_function *fn)
 185 {
 186         struct rmi_function_handler *fh;
 187         int retval = 0;
 188
 189         if (!fn || !fn->dev.driver)
 190                 return 0;
 191
 192         fh = to_rmi_function_handler(fn->dev.driver);
 193         if (fh->suspend) {
 194                 retval = fh->suspend(fn);
 195                 if (retval < 0)
 196                         dev_err(&fn->dev, "Suspend failed with code %d.\n",
 197                                 retval);
 198         }
 199
 200         return retval;
 201 }
 202
 203 static int rmi_suspend_functions(struct rmi_device *rmi_dev)
 204 {
 205         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 206         struct rmi_function *entry;
 207         int retval;
 208
 209         list_for_each_entry(entry, &data->function_list, node) {
 210                 retval = suspend_one_function(entry);
 211                 if (retval < 0)
 212                         return retval;
 213         }
 214
 215         return 0;
 216 }
 217
 218 static int resume_one_function(struct rmi_function *fn)
 219 {
 220         struct rmi_function_handler *fh;
 221         int retval = 0;
 222
 223         if (!fn || !fn->dev.driver)
 224                 return 0;
 225
 226         fh = to_rmi_function_handler(fn->dev.driver);
 227         if (fh->resume) {
 228                 retval = fh->resume(fn);
 229                 if (retval < 0)
 230                         dev_err(&fn->dev, "Resume failed with code %d.\n",
 231                                 retval);
 232         }
 233
 234         return retval;
 235 }
 236
 237 static int rmi_resume_functions(struct rmi_device *rmi_dev)
 238 {
 239         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 240         struct rmi_function *entry;
 241         int retval;
 242
 243         list_for_each_entry(entry, &data->function_list, node) {
 244                 retval = resume_one_function(entry);
 245                 if (retval < 0)
 246                         return retval;
 247         }
 248
 249         return 0;
 250 }
 251
 252 static int enable_sensor(struct rmi_device *rmi_dev)
 253 {
 254         int retval = 0;
 255
 256         retval = rmi_driver_process_config_requests(rmi_dev);
 257         if (retval < 0)
 258                 return retval;
 259
 260         return rmi_process_interrupt_requests(rmi_dev);
 261 }
 262
 263 /**
 264  * rmi_driver_set_input_params - set input device id and other data.
 265  *
 266  * @rmi_dev: Pointer to an RMI device
 267  * @input: Pointer to input device
 268  *
 269  */
 270 static int rmi_driver_set_input_params(struct rmi_device *rmi_dev,
 271                                 struct input_dev *input)
 272 {
 273         input->name = SYNAPTICS_INPUT_DEVICE_NAME;
 274         input->id.vendor  = SYNAPTICS_VENDOR_ID;
 275         input->id.bustype = BUS_RMI;
 276         return 0;
 277 }
 278
 279 static void rmi_driver_set_input_name(struct rmi_device *rmi_dev,
 280                                 struct input_dev *input)
 281 {
 282         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 283         char *device_name = rmi_f01_get_product_ID(data->f01_container);
 284         char *name;
 285
 286         name = devm_kasprintf(&rmi_dev->dev, GFP_KERNEL,
 287                               "Synaptics %s", device_name);
 288         if (!name)
 289                 return;
 290
 291         input->name = name;
 292 }
 293
 294 static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev,
 295                                    unsigned long *mask)
 296 {
 297         int error = 0;
 298         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 299         struct device *dev = &rmi_dev->dev;
 300
 301         mutex_lock(&data->irq_mutex);
 302         bitmap_or(data->new_irq_mask,
 303                   data->current_irq_mask, mask, data->irq_count);
 304
 305         error = rmi_write_block(rmi_dev,
 306                         data->f01_container->fd.control_base_addr + 1,
 307                         data->new_irq_mask, data->num_of_irq_regs);
 308         if (error < 0) {
 309                 dev_err(dev, "%s: Failed to change enabled interrupts!",
 310                                                         __func__);
 311                 goto error_unlock;
 312         }
 313         bitmap_copy(data->current_irq_mask, data->new_irq_mask,
 314                     data->num_of_irq_regs);
 315
 316 error_unlock:
 317         mutex_unlock(&data->irq_mutex);
 318         return error;
 319 }
 320
 321 static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev,
 322                                      unsigned long *mask)
 323 {
 324         int error = 0;
 325         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 326         struct device *dev = &rmi_dev->dev;
 327
 328         mutex_lock(&data->irq_mutex);
 329         bitmap_andnot(data->new_irq_mask,
 330                   data->current_irq_mask, mask, data->irq_count);
 331
 332         error = rmi_write_block(rmi_dev,
 333                         data->f01_container->fd.control_base_addr + 1,
 334                         data->new_irq_mask, data->num_of_irq_regs);
 335         if (error < 0) {
 336                 dev_err(dev, "%s: Failed to change enabled interrupts!",
 337                                                         __func__);
 338                 goto error_unlock;
 339         }
 340         bitmap_copy(data->current_irq_mask, data->new_irq_mask,
 341                     data->num_of_irq_regs);
 342
 343 error_unlock:
 344         mutex_unlock(&data->irq_mutex);
 345         return error;
 346 }
 347
 348 static int rmi_driver_reset_handler(struct rmi_device *rmi_dev)
 349 {
 350         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 351         int error;
 352
 353         /*
 354          * Can get called before the driver is fully ready to deal with
 355          * this situation.
 356          */
 357         if (!data || !data->f01_container) {
 358                 dev_warn(&rmi_dev->dev,
 359                          "Not ready to handle reset yet!\n");
 360                 return 0;
 361         }
 362
 363         error = rmi_read_block(rmi_dev,
 364                                data->f01_container->fd.control_base_addr + 1,
 365                                data->current_irq_mask, data->num_of_irq_regs);
 366         if (error < 0) {
 367                 dev_err(&rmi_dev->dev, "%s: Failed to read current IRQ mask.\n",
 368                         __func__);
 369                 return error;
 370         }
 371
 372         error = rmi_driver_process_reset_requests(rmi_dev);
 373         if (error < 0)
 374                 return error;
 375
 376         error = rmi_driver_process_config_requests(rmi_dev);
 377         if (error < 0)
 378                 return error;
 379
 380         return 0;
 381 }
 382
 383 int rmi_read_pdt_entry(struct rmi_device *rmi_dev, struct pdt_entry *entry,
 384                         u16 pdt_address)
 385 {
 386         u8 buf[RMI_PDT_ENTRY_SIZE];
 387         int error;
 388
 389         error = rmi_read_block(rmi_dev, pdt_address, buf, RMI_PDT_ENTRY_SIZE);
 390         if (error) {
 391                 dev_err(&rmi_dev->dev, "Read PDT entry at %#06x failed, code: %d.\n",
 392                                 pdt_address, error);
 393                 return error;
 394         }
 395
 396         entry->page_start = pdt_address & RMI4_PAGE_MASK;
 397         entry->query_base_addr = buf[0];
 398         entry->command_base_addr = buf[1];
 399         entry->control_base_addr = buf[2];
 400         entry->data_base_addr = buf[3];
 401         entry->interrupt_source_count = buf[4] & RMI_PDT_INT_SOURCE_COUNT_MASK;
 402         entry->function_version = (buf[4] & RMI_PDT_FUNCTION_VERSION_MASK) >> 5;
 403         entry->function_number = buf[5];
 404
 405         return 0;
 406 }
 407 EXPORT_SYMBOL_GPL(rmi_read_pdt_entry);
 408
 409 static void rmi_driver_copy_pdt_to_fd(const struct pdt_entry *pdt,
 410                                       struct rmi_function_descriptor *fd)
 411 {
 412         fd->query_base_addr = pdt->query_base_addr + pdt->page_start;
 413         fd->command_base_addr = pdt->command_base_addr + pdt->page_start;
 414         fd->control_base_addr = pdt->control_base_addr + pdt->page_start;
 415         fd->data_base_addr = pdt->data_base_addr + pdt->page_start;
 416         fd->function_number = pdt->function_number;
 417         fd->interrupt_source_count = pdt->interrupt_source_count;
 418         fd->function_version = pdt->function_version;
 419 }
 420
 421 #define RMI_SCAN_CONTINUE       0
 422 #define RMI_SCAN_DONE           1
 423
 424 static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
 425                              int page,
 426                              void *ctx,
 427                              int (*callback)(struct rmi_device *rmi_dev,
 428                                              void *ctx,
 429                                              const struct pdt_entry *entry))
 430 {
 431         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 432         struct pdt_entry pdt_entry;
 433         u16 page_start = RMI4_PAGE_SIZE * page;
 434         u16 pdt_start = page_start + PDT_START_SCAN_LOCATION;
 435         u16 pdt_end = page_start + PDT_END_SCAN_LOCATION;
 436         u16 addr;
 437         int error;
 438         int retval;
 439
 440         for (addr = pdt_start; addr >= pdt_end; addr -= RMI_PDT_ENTRY_SIZE) {
 441                 error = rmi_read_pdt_entry(rmi_dev, &pdt_entry, addr);
 442                 if (error)
 443                         return error;
 444
 445                 if (RMI4_END_OF_PDT(pdt_entry.function_number))
 446                         break;
 447
 448                 retval = callback(rmi_dev, ctx, &pdt_entry);
 449                 if (retval != RMI_SCAN_CONTINUE)
 450                         return retval;
 451         }
 452
 453         return (data->f01_bootloader_mode || addr == pdt_start) ?
 454                                         RMI_SCAN_DONE : RMI_SCAN_CONTINUE;
 455 }
 456
 457 static int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
 458                         int (*callback)(struct rmi_device *rmi_dev,
 459                                         void *ctx,
 460                                         const struct pdt_entry *entry))
 461 {
 462         int page;
 463         int retval = RMI_SCAN_DONE;
 464
 465         for (page = 0; page <= RMI4_MAX_PAGE; page++) {
 466                 retval = rmi_scan_pdt_page(rmi_dev, page, ctx, callback);
 467                 if (retval != RMI_SCAN_CONTINUE)
 468                         break;
 469         }
 470
 471         return retval < 0 ? retval : 0;
 472 }
 473
 474 int rmi_read_register_desc(struct rmi_device *d, u16 addr,
 475                                 struct rmi_register_descriptor *rdesc)
 476 {
 477         int ret;
 478         u8 size_presence_reg;
 479         u8 buf[35];
 480         int presense_offset = 1;
 481         u8 *struct_buf;
 482         int reg;
 483         int offset = 0;
 484         int map_offset = 0;
 485         int i;
 486         int b;
 487
 488         /*
 489          * The first register of the register descriptor is the size of
 490          * the register descriptor's presense register.
 491          */
 492         ret = rmi_read(d, addr, &size_presence_reg);
 493         if (ret)
 494                 return ret;
 495         ++addr;
 496
 497         if (size_presence_reg < 0 || size_presence_reg > 35)
 498                 return -EIO;
 499
 500         memset(buf, 0, sizeof(buf));
 501
 502         /*
 503          * The presence register contains the size of the register structure
 504          * and a bitmap which identified which packet registers are present
 505          * for this particular register type (ie query, control, or data).
 506          */
 507         ret = rmi_read_block(d, addr, buf, size_presence_reg);
 508         if (ret)
 509                 return ret;
 510         ++addr;
 511
 512         if (buf[0] == 0) {
 513                 presense_offset = 3;
 514                 rdesc->struct_size = buf[1] | (buf[2] << 8);
 515         } else {
 516                 rdesc->struct_size = buf[0];
 517         }
 518
 519         for (i = presense_offset; i < size_presence_reg; i++) {
 520                 for (b = 0; b < 8; b++) {
 521                         if (buf[i] & (0x1 << b))
 522                                 bitmap_set(rdesc->presense_map, map_offset, 1);
 523                         ++map_offset;
 524                 }
 525         }
 526
 527         rdesc->num_registers = bitmap_weight(rdesc->presense_map,
 528                                                 RMI_REG_DESC_PRESENSE_BITS);
 529
 530         rdesc->registers = devm_kzalloc(&d->dev, rdesc->num_registers *
 531                                 sizeof(struct rmi_register_desc_item),
 532                                 GFP_KERNEL);
 533         if (!rdesc->registers)
 534                 return -ENOMEM;
 535
 536         /*
 537          * Allocate a temporary buffer to hold the register structure.
 538          * I'm not using devm_kzalloc here since it will not be retained
 539          * after exiting this function
 540          */
 541         struct_buf = kzalloc(rdesc->struct_size, GFP_KERNEL);
 542         if (!struct_buf)
 543                 return -ENOMEM;
 544
 545         /*
 546          * The register structure contains information about every packet
 547          * register of this type. This includes the size of the packet
 548          * register and a bitmap of all subpackets contained in the packet
 549          * register.
 550          */
 551         ret = rmi_read_block(d, addr, struct_buf, rdesc->struct_size);
 552         if (ret)
 553                 goto free_struct_buff;
 554
 555         reg = find_first_bit(rdesc->presense_map, RMI_REG_DESC_PRESENSE_BITS);
 556         map_offset = 0;
 557         for (i = 0; i < rdesc->num_registers; i++) {
 558                 struct rmi_register_desc_item *item = &rdesc->registers[i];
 559                 int reg_size = struct_buf[offset];
 560
 561                 ++offset;
 562                 if (reg_size == 0) {
 563                         reg_size = struct_buf[offset] |
 564                                         (struct_buf[offset + 1] << 8);
 565                         offset += 2;
 566                 }
 567
 568                 if (reg_size == 0) {
 569                         reg_size = struct_buf[offset] |
 570                                         (struct_buf[offset + 1] << 8) |
 571                                         (struct_buf[offset + 2] << 16) |
 572                                         (struct_buf[offset + 3] << 24);
 573                         offset += 4;
 574                 }
 575
 576                 item->reg = reg;
 577                 item->reg_size = reg_size;
 578
 579                 do {
 580                         for (b = 0; b < 7; b++) {
 581                                 if (struct_buf[offset] & (0x1 << b))
 582                                         bitmap_set(item->subpacket_map,
 583                                                 map_offset, 1);
 584                                 ++map_offset;
 585                         }
 586                 } while (struct_buf[offset++] & 0x80);
 587
 588                 item->num_subpackets = bitmap_weight(item->subpacket_map,
 589                                                 RMI_REG_DESC_SUBPACKET_BITS);
 590
 591                 rmi_dbg(RMI_DEBUG_CORE, &d->dev,
 592                         "%s: reg: %d reg size: %ld subpackets: %d\n", __func__,
 593                         item->reg, item->reg_size, item->num_subpackets);
 594
 595                 reg = find_next_bit(rdesc->presense_map,
 596                                 RMI_REG_DESC_PRESENSE_BITS, reg + 1);
 597         }
 598
 599 free_struct_buff:
 600         kfree(struct_buf);
 601         return ret;
 602 }
 603 EXPORT_SYMBOL_GPL(rmi_read_register_desc);
 604
 605 const struct rmi_register_desc_item *rmi_get_register_desc_item(
 606                                 struct rmi_register_descriptor *rdesc, u16 reg)
 607 {
 608         const struct rmi_register_desc_item *item;
 609         int i;
 610
 611         for (i = 0; i < rdesc->num_registers; i++) {
 612                 item = &rdesc->registers[i];
 613                 if (item->reg == reg)
 614                         return item;
 615         }
 616
 617         return NULL;
 618 }
 619 EXPORT_SYMBOL_GPL(rmi_get_register_desc_item);
 620
 621 size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc)
 622 {
 623         const struct rmi_register_desc_item *item;
 624         int i;
 625         size_t size = 0;
 626
 627         for (i = 0; i < rdesc->num_registers; i++) {
 628                 item = &rdesc->registers[i];
 629                 size += item->reg_size;
 630         }
 631         return size;
 632 }
 633 EXPORT_SYMBOL_GPL(rmi_register_desc_calc_size);
 634
 635 /* Compute the register offset relative to the base address */
 636 int rmi_register_desc_calc_reg_offset(
 637                 struct rmi_register_descriptor *rdesc, u16 reg)
 638 {
 639         const struct rmi_register_desc_item *item;
 640         int offset = 0;
 641         int i;
 642
 643         for (i = 0; i < rdesc->num_registers; i++) {
 644                 item = &rdesc->registers[i];
 645                 if (item->reg == reg)
 646                         return offset;
 647                 ++offset;
 648         }
 649         return -1;
 650 }
 651 EXPORT_SYMBOL_GPL(rmi_register_desc_calc_reg_offset);
 652
 653 bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
 654         u8 subpacket)
 655 {
 656         return find_next_bit(item->subpacket_map, RMI_REG_DESC_PRESENSE_BITS,
 657                                 subpacket) == subpacket;
 658 }
 659
 660 /* Indicates that flash programming is enabled (bootloader mode). */
 661 #define RMI_F01_STATUS_BOOTLOADER(status)       (!!((status) & 0x40))
 662
 663 /*
 664  * Given the PDT entry for F01, read the device status register to determine
 665  * if we're stuck in bootloader mode or not.
 666  *
 667  */
 668 static int rmi_check_bootloader_mode(struct rmi_device *rmi_dev,
 669                                      const struct pdt_entry *pdt)
 670 {
 671         int error;
 672         u8 device_status;
 673
 674         error = rmi_read(rmi_dev, pdt->data_base_addr + pdt->page_start,
 675                          &device_status);
 676         if (error) {
 677                 dev_err(&rmi_dev->dev,
 678                         "Failed to read device status: %d.\n", error);
 679                 return error;
 680         }
 681
 682         return RMI_F01_STATUS_BOOTLOADER(device_status);
 683 }
 684
 685 static int rmi_count_irqs(struct rmi_device *rmi_dev,
 686                          void *ctx, const struct pdt_entry *pdt)
 687 {
 688         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 689         int *irq_count = ctx;
 690
 691         *irq_count += pdt->interrupt_source_count;
 692         if (pdt->function_number == 0x01) {
 693                 data->f01_bootloader_mode =
 694                         rmi_check_bootloader_mode(rmi_dev, pdt);
 695                 if (data->f01_bootloader_mode)
 696                         dev_warn(&rmi_dev->dev,
 697                                 "WARNING: RMI4 device is in bootloader mode!\n");
 698         }
 699
 700         return RMI_SCAN_CONTINUE;
 701 }
 702
 703 static int rmi_initial_reset(struct rmi_device *rmi_dev,
 704                              void *ctx, const struct pdt_entry *pdt)
 705 {
 706         int error;
 707
 708         if (pdt->function_number == 0x01) {
 709                 u16 cmd_addr = pdt->page_start + pdt->command_base_addr;
 710                 u8 cmd_buf = RMI_DEVICE_RESET_CMD;
 711                 const struct rmi_device_platform_data *pdata =
 712                                 rmi_get_platform_data(rmi_dev);
 713
 714                 if (rmi_dev->xport->ops->reset) {
 715                         error = rmi_dev->xport->ops->reset(rmi_dev->xport,
 716                                                                 cmd_addr);
 717                         if (error)
 718                                 return error;
 719
 720                         return RMI_SCAN_DONE;
 721                 }
 722
 723                 error = rmi_write_block(rmi_dev, cmd_addr, &cmd_buf, 1);
 724                 if (error) {
 725                         dev_err(&rmi_dev->dev,
 726                                 "Initial reset failed. Code = %d.\n", error);
 727                         return error;
 728                 }
 729
 730                 mdelay(pdata->reset_delay_ms ?: DEFAULT_RESET_DELAY_MS);
 731
 732                 return RMI_SCAN_DONE;
 733         }
 734
 735         /* F01 should always be on page 0. If we don't find it there, fail. */
 736         return pdt->page_start == 0 ? RMI_SCAN_CONTINUE : -ENODEV;
 737 }
 738
 739 static int rmi_create_function(struct rmi_device *rmi_dev,
 740                                void *ctx, const struct pdt_entry *pdt)
 741 {
 742         struct device *dev = &rmi_dev->dev;
 743         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 744         int *current_irq_count = ctx;
 745         struct rmi_function *fn;
 746         int i;
 747         int error;
 748
 749         rmi_dbg(RMI_DEBUG_CORE, dev, "Initializing F%02X.\n",
 750                         pdt->function_number);
 751
 752         fn = kzalloc(sizeof(struct rmi_function) +
 753                         BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long),
 754                      GFP_KERNEL);
 755         if (!fn) {
 756                 dev_err(dev, "Failed to allocate memory for F%02X\n",
 757                         pdt->function_number);
 758                 return -ENOMEM;
 759         }
 760
 761         INIT_LIST_HEAD(&fn->node);
 762         rmi_driver_copy_pdt_to_fd(pdt, &fn->fd);
 763
 764         fn->rmi_dev = rmi_dev;
 765
 766         fn->num_of_irqs = pdt->interrupt_source_count;
 767         fn->irq_pos = *current_irq_count;
 768         *current_irq_count += fn->num_of_irqs;
 769
 770         for (i = 0; i < fn->num_of_irqs; i++)
 771                 set_bit(fn->irq_pos + i, fn->irq_mask);
 772
 773         error = rmi_register_function(fn);
 774         if (error)
 775                 goto err_put_fn;
 776
 777         if (pdt->function_number == 0x01)
 778                 data->f01_container = fn;
 779
 780         list_add_tail(&fn->node, &data->function_list);
 781
 782         return RMI_SCAN_CONTINUE;
 783
 784 err_put_fn:
 785         put_device(&fn->dev);
 786         return error;
 787 }
 788
 789 int rmi_driver_suspend(struct rmi_device *rmi_dev)
 790 {
 791         int retval = 0;
 792
 793         retval = rmi_suspend_functions(rmi_dev);
 794         if (retval)
 795                 dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
 796                         retval);
 797
 798         return retval;
 799 }
 800 EXPORT_SYMBOL_GPL(rmi_driver_suspend);
 801
 802 int rmi_driver_resume(struct rmi_device *rmi_dev)
 803 {
 804         int retval;
 805
 806         retval = rmi_resume_functions(rmi_dev);
 807         if (retval)
 808                 dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
 809                         retval);
 810
 811         return retval;
 812 }
 813 EXPORT_SYMBOL_GPL(rmi_driver_resume);
 814
 815 static int rmi_driver_remove(struct device *dev)
 816 {
 817         struct rmi_device *rmi_dev = to_rmi_device(dev);
 818
 819         rmi_free_function_list(rmi_dev);
 820
 821         return 0;
 822 }
 823
 824 #ifdef CONFIG_OF
 825 static int rmi_driver_of_probe(struct device *dev,
 826                                 struct rmi_device_platform_data *pdata)
 827 {
 828         int retval;
 829
 830         retval = rmi_of_property_read_u32(dev, &pdata->reset_delay_ms,
 831                                         "syna,reset-delay-ms", 1);
 832         if (retval)
 833                 return retval;
 834
 835         return 0;
 836 }
 837 #else
 838 static inline int rmi_driver_of_probe(struct device *dev,
 839                                         struct rmi_device_platform_data *pdata)
 840 {
 841         return -ENODEV;
 842 }
 843 #endif
 844
 845 static int rmi_driver_probe(struct device *dev)
 846 {
 847         struct rmi_driver *rmi_driver;
 848         struct rmi_driver_data *data;
 849         struct rmi_device_platform_data *pdata;
 850         struct rmi_device *rmi_dev;
 851         size_t size;
 852         void *irq_memory;
 853         int irq_count;
 854         int retval;
 855
 856         rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Starting probe.\n",
 857                         __func__);
 858
 859         if (!rmi_is_physical_device(dev)) {
 860                 rmi_dbg(RMI_DEBUG_CORE, dev, "Not a physical device.\n");
 861                 return -ENODEV;
 862         }
 863
 864         rmi_dev = to_rmi_device(dev);
 865         rmi_driver = to_rmi_driver(dev->driver);
 866         rmi_dev->driver = rmi_driver;
 867
 868         pdata = rmi_get_platform_data(rmi_dev);
 869
 870         if (rmi_dev->xport->dev->of_node) {
 871                 retval = rmi_driver_of_probe(rmi_dev->xport->dev, pdata);
 872                 if (retval)
 873                         return retval;
 874         }
 875
 876         data = devm_kzalloc(dev, sizeof(struct rmi_driver_data), GFP_KERNEL);
 877         if (!data)
 878                 return -ENOMEM;
 879
 880         INIT_LIST_HEAD(&data->function_list);
 881         data->rmi_dev = rmi_dev;
 882         dev_set_drvdata(&rmi_dev->dev, data);
 883
 884         /*
 885          * Right before a warm boot, the sensor might be in some unusual state,
 886          * such as F54 diagnostics, or F34 bootloader mode after a firmware
 887          * or configuration update.  In order to clear the sensor to a known
 888          * state and/or apply any updates, we issue a initial reset to clear any
 889          * previous settings and force it into normal operation.
 890          *
 891          * We have to do this before actually building the PDT because
 892          * the reflash updates (if any) might cause various registers to move
 893          * around.
 894          *
 895          * For a number of reasons, this initial reset may fail to return
 896          * within the specified time, but we'll still be able to bring up the
 897          * driver normally after that failure.  This occurs most commonly in
 898          * a cold boot situation (where then firmware takes longer to come up
 899          * than from a warm boot) and the reset_delay_ms in the platform data
 900          * has been set too short to accommodate that.  Since the sensor will
 901          * eventually come up and be usable, we don't want to just fail here
 902          * and leave the customer's device unusable.  So we warn them, and
 903          * continue processing.
 904          */
 905         retval = rmi_scan_pdt(rmi_dev, NULL, rmi_initial_reset);
 906         if (retval < 0)
 907                 dev_warn(dev, "RMI initial reset failed! Continuing in spite of this.\n");
 908
 909         retval = rmi_read(rmi_dev, PDT_PROPERTIES_LOCATION, &data->pdt_props);
 910         if (retval < 0) {
 911                 /*
 912                  * we'll print out a warning and continue since
 913                  * failure to get the PDT properties is not a cause to fail
 914                  */
 915                 dev_warn(dev, "Could not read PDT properties from %#06x (code %d). Assuming 0x00.\n",
 916                          PDT_PROPERTIES_LOCATION, retval);
 917         }
 918
 919         /*
 920          * We need to count the IRQs and allocate their storage before scanning
 921          * the PDT and creating the function entries, because adding a new
 922          * function can trigger events that result in the IRQ related storage
 923          * being accessed.
 924          */
 925         rmi_dbg(RMI_DEBUG_CORE, dev, "Counting IRQs.\n");
 926         irq_count = 0;
 927         retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
 928         if (retval < 0) {
 929                 dev_err(dev, "IRQ counting failed with code %d.\n", retval);
 930                 goto err;
 931         }
 932         data->irq_count = irq_count;
 933         data->num_of_irq_regs = (data->irq_count + 7) / 8;
 934
 935         mutex_init(&data->irq_mutex);
 936
 937         size = BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long);
 938         irq_memory = devm_kzalloc(dev, size * 4, GFP_KERNEL);
 939         if (!irq_memory) {
 940                 dev_err(dev, "Failed to allocate memory for irq masks.\n");
 941                 goto err;
 942         }
 943
 944         data->irq_status        = irq_memory + size * 0;
 945         data->fn_irq_bits       = irq_memory + size * 1;
 946         data->current_irq_mask  = irq_memory + size * 2;
 947         data->new_irq_mask      = irq_memory + size * 3;
 948
 949         if (rmi_dev->xport->input) {
 950                 /*
 951                  * The transport driver already has an input device.
 952                  * In some cases it is preferable to reuse the transport
 953                  * devices input device instead of creating a new one here.
 954                  * One example is some HID touchpads report "pass-through"
 955                  * button events are not reported by rmi registers.
 956                  */
 957                 data->input = rmi_dev->xport->input;
 958         } else {
 959                 data->input = devm_input_allocate_device(dev);
 960                 if (!data->input) {
 961                         dev_err(dev, "%s: Failed to allocate input device.\n",
 962                                 __func__);
 963                         retval = -ENOMEM;
 964                         goto err_destroy_functions;
 965                 }
 966                 rmi_driver_set_input_params(rmi_dev, data->input);
 967                 data->input->phys = devm_kasprintf(dev, GFP_KERNEL,
 968                                                 "%s/input0", dev_name(dev));
 969         }
 970
 971         irq_count = 0;
 972         rmi_dbg(RMI_DEBUG_CORE, dev, "Creating functions.");
 973         retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
 974         if (retval < 0) {
 975                 dev_err(dev, "Function creation failed with code %d.\n",
 976                         retval);
 977                 goto err_destroy_functions;
 978         }
 979
 980         if (!data->f01_container) {
 981                 dev_err(dev, "Missing F01 container!\n");
 982                 retval = -EINVAL;
 983                 goto err_destroy_functions;
 984         }
 985
 986         retval = rmi_read_block(rmi_dev,
 987                                 data->f01_container->fd.control_base_addr + 1,
 988                                 data->current_irq_mask, data->num_of_irq_regs);
 989         if (retval < 0) {
 990                 dev_err(dev, "%s: Failed to read current IRQ mask.\n",
 991                         __func__);
 992                 goto err_destroy_functions;
 993         }
 994
 995         if (data->input) {
 996                 rmi_driver_set_input_name(rmi_dev, data->input);
 997                 if (!rmi_dev->xport->input) {
 998                         if (input_register_device(data->input)) {
 999                                 dev_err(dev, "%s: Failed to register input device.\n",
1000                                         __func__);
1001                                 goto err_destroy_functions;
1002                         }
1003                 }
1004         }
1005
1006         if (data->f01_container->dev.driver)
1007                 /* Driver already bound, so enable ATTN now. */
1008                 return enable_sensor(rmi_dev);
1009
1010         return 0;
1011
1012 err_destroy_functions:
1013         rmi_free_function_list(rmi_dev);
1014 err:
1015         return retval < 0 ? retval : 0;
1016 }
1017
1018 static struct rmi_driver rmi_physical_driver = {
1019         .driver = {
1020                 .owner  = THIS_MODULE,
1021                 .name   = "rmi4_physical",
1022                 .bus    = &rmi_bus_type,
1023                 .probe = rmi_driver_probe,
1024                 .remove = rmi_driver_remove,
1025         },
1026         .reset_handler = rmi_driver_reset_handler,
1027         .clear_irq_bits = rmi_driver_clear_irq_bits,
1028         .set_irq_bits = rmi_driver_set_irq_bits,
1029         .set_input_params = rmi_driver_set_input_params,
1030 };
1031
1032 bool rmi_is_physical_driver(struct device_driver *drv)
1033 {
1034         return drv == &rmi_physical_driver.driver;
1035 }
1036
1037 int __init rmi_register_physical_driver(void)
1038 {
1039         int error;
1040
1041         error = driver_register(&rmi_physical_driver.driver);
1042         if (error) {
1043                 pr_err("%s: driver register failed, code=%d.\n", __func__,
1044                        error);
1045                 return error;
1046         }
1047
1048         return 0;
1049 }
1050
1051 void __exit rmi_unregister_physical_driver(void)
1052 {
1053         driver_unregister(&rmi_physical_driver.driver);
1054 }