2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_PROPERTIES
18 config TOUCHSCREEN_88PM860X
19 tristate "Marvell 88PM860x touchscreen"
20 depends on MFD_88PM860X
22 Say Y here if you have a 88PM860x PMIC and want to enable
23 support for the built-in touchscreen.
27 To compile this driver as a module, choose M here: the
28 module will be called 88pm860x-ts.
30 config TOUCHSCREEN_ADS7846
31 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
33 depends on HWMON = n || HWMON
35 Say Y here if you have a touchscreen interface using the
36 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
37 and your board-specific setup code includes that in its
40 If HWMON is selected, and the driver is told the reference voltage
41 on your board, you will also get hwmon interfaces for the voltage
42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
44 If unsure, say N (but it's safe to say "Y").
46 To compile this driver as a module, choose M here: the
47 module will be called ads7846.
49 config TOUCHSCREEN_AD7877
50 tristate "AD7877 based touchscreens"
53 Say Y here if you have a touchscreen interface using the
54 AD7877 controller, and your board-specific initialization
55 code includes that in its table of SPI devices.
57 If unsure, say N (but it's safe to say "Y").
59 To compile this driver as a module, choose M here: the
60 module will be called ad7877.
62 config TOUCHSCREEN_AD7879
63 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
65 Say Y here if you want to support a touchscreen interface using
66 the AD7879-1/AD7889-1 controller.
68 You should select a bus connection too.
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
73 config TOUCHSCREEN_AD7879_I2C
74 tristate "support I2C bus connection"
75 depends on TOUCHSCREEN_AD7879 && I2C
77 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
79 To compile this driver as a module, choose M here: the
80 module will be called ad7879-i2c.
82 config TOUCHSCREEN_AD7879_SPI
83 tristate "support SPI bus connection"
84 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
86 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
88 If unsure, say N (but it's safe to say "Y").
90 To compile this driver as a module, choose M here: the
91 module will be called ad7879-spi.
93 config TOUCHSCREEN_AR1021_I2C
94 tristate "Microchip AR1021 i2c touchscreen"
97 Say Y here if you have the Microchip AR1021 touchscreen controller
102 To compile this driver as a module, choose M here: the
103 module will be called ar1021_i2c.
105 config TOUCHSCREEN_ATMEL_MXT
106 tristate "Atmel mXT I2C Touchscreen"
110 Say Y here if you have Atmel mXT series I2C touchscreen,
111 such as AT42QT602240/ATMXT224, connected to your system.
115 To compile this driver as a module, choose M here: the
116 module will be called atmel_mxt_ts.
118 config TOUCHSCREEN_AUO_PIXCIR
119 tristate "AUO in-cell touchscreen using Pixcir ICs"
121 depends on GPIOLIB || COMPILE_TEST
123 Say Y here if you have a AUO display with in-cell touchscreen
128 To compile this driver as a module, choose M here: the
129 module will be called auo-pixcir-ts.
131 config TOUCHSCREEN_BU21013
132 tristate "BU21013 based touch panel controllers"
135 Say Y here if you have a bu21013 touchscreen connected to
140 To compile this driver as a module, choose M here: the
141 module will be called bu21013_ts.
143 config TOUCHSCREEN_CHIPONE_ICN8318
144 tristate "chipone icn8318 touchscreen controller"
145 depends on GPIOLIB || COMPILE_TEST
149 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
153 To compile this driver as a module, choose M here: the
154 module will be called chipone_icn8318.
156 config TOUCHSCREEN_CY8CTMG110
157 tristate "cy8ctmg110 touchscreen"
159 depends on GPIOLIB || COMPILE_TEST
161 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
166 To compile this driver as a module, choose M here: the
167 module will be called cy8ctmg110_ts.
169 config TOUCHSCREEN_CYTTSP_CORE
170 tristate "Cypress TTSP touchscreen"
172 Say Y here if you have a touchscreen using controller from
173 the Cypress TrueTouch(tm) Standard Product family connected
174 to your system. You will also need to select appropriate
175 bus connection below.
179 To compile this driver as a module, choose M here: the
180 module will be called cyttsp_core.
182 config TOUCHSCREEN_CYTTSP_I2C
183 tristate "support I2C bus connection"
184 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
186 Say Y here if the touchscreen is connected via I2C bus.
188 To compile this driver as a module, choose M here: the
189 module will be called cyttsp_i2c.
191 config TOUCHSCREEN_CYTTSP_SPI
192 tristate "support SPI bus connection"
193 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
195 Say Y here if the touchscreen is connected via SPI bus.
197 To compile this driver as a module, choose M here: the
198 module will be called cyttsp_spi.
200 config TOUCHSCREEN_CYTTSP4_CORE
201 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
203 Core driver for Cypress TrueTouch(tm) Standard Product
204 Generation4 touchscreen controllers.
206 Say Y here if you have a Cypress Gen4 touchscreen.
210 To compile this driver as a module, choose M here.
212 config TOUCHSCREEN_CYTTSP4_I2C
213 tristate "support I2C bus connection"
214 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
216 Say Y here if the touchscreen is connected via I2C bus.
218 To compile this driver as a module, choose M here: the
219 module will be called cyttsp4_i2c.
221 config TOUCHSCREEN_CYTTSP4_SPI
222 tristate "support SPI bus connection"
223 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
225 Say Y here if the touchscreen is connected via SPI bus.
227 To compile this driver as a module, choose M here: the
228 module will be called cyttsp4_spi.
230 config TOUCHSCREEN_DA9034
231 tristate "Touchscreen support for Dialog Semiconductor DA9034"
232 depends on PMIC_DA903X
235 Say Y here to enable the support for the touchscreen found
236 on Dialog Semiconductor DA9034 PMIC.
240 To compile this driver as a module, choose M here: the
241 module will be called da9034-ts.
243 config TOUCHSCREEN_DA9052
244 tristate "Dialog DA9052/DA9053 TSI"
245 depends on PMIC_DA9052
247 Say Y here to support the touchscreen found on Dialog Semiconductor
248 DA9052-BC and DA9053-AA/Bx PMICs.
252 To compile this driver as a module, choose M here: the
253 module will be called da9052_tsi.
255 config TOUCHSCREEN_DYNAPRO
256 tristate "Dynapro serial touchscreen"
259 Say Y here if you have a Dynapro serial touchscreen connected to
264 To compile this driver as a module, choose M here: the
265 module will be called dynapro.
267 config TOUCHSCREEN_HAMPSHIRE
268 tristate "Hampshire serial touchscreen"
271 Say Y here if you have a Hampshire serial touchscreen connected to
276 To compile this driver as a module, choose M here: the
277 module will be called hampshire.
279 config TOUCHSCREEN_EETI
280 tristate "EETI touchscreen panel support"
283 Say Y here to enable support for I2C connected EETI touch panels.
285 To compile this driver as a module, choose M here: the
286 module will be called eeti_ts.
288 config TOUCHSCREEN_EGALAX
289 tristate "EETI eGalax multi-touch panel support"
292 Say Y here to enable support for I2C connected EETI
293 eGalax multi-touch panels.
295 To compile this driver as a module, choose M here: the
296 module will be called egalax_ts.
298 config TOUCHSCREEN_EGALAX_SERIAL
299 tristate "EETI eGalax serial touchscreen"
302 Say Y here to enable support for serial connected EETI
305 To compile this driver as a module, choose M here: the
306 module will be called egalax_ts_serial.
308 config TOUCHSCREEN_FT6236
309 tristate "FT6236 I2C touchscreen"
311 depends on GPIOLIB || COMPILE_TEST
313 Say Y here to enable support for the I2C connected FT6x06 and
314 FT6x36 family of capacitive touchscreen drivers.
318 To compile this driver as a module, choose M here: the
319 module will be called ft6236.
321 config TOUCHSCREEN_FUJITSU
322 tristate "Fujitsu serial touchscreen"
325 Say Y here if you have the Fujitsu touchscreen (such as one
326 installed in Lifebook P series laptop) connected to your
331 To compile this driver as a module, choose M here: the
332 module will be called fujitsu-ts.
334 config TOUCHSCREEN_GOODIX
335 tristate "Goodix I2C touchscreen"
337 depends on GPIOLIB || COMPILE_TEST
339 Say Y here if you have the Goodix touchscreen (such as one
340 installed in Onda v975w tablets) connected to your
341 system. It also supports 5-finger chip models, which can be
342 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
346 To compile this driver as a module, choose M here: the
347 module will be called goodix.
349 config TOUCHSCREEN_ILI210X
350 tristate "Ilitek ILI210X based touchscreen"
353 Say Y here if you have a ILI210X based touchscreen
354 controller. This driver supports models ILI2102,
355 ILI2102s, ILI2103, ILI2103s and ILI2105.
356 Such kind of chipsets can be found in Amazon Kindle Fire
361 To compile this driver as a module, choose M here: the
362 module will be called ili210x.
364 config TOUCHSCREEN_IPROC
365 tristate "IPROC touch panel driver support"
366 depends on ARCH_BCM_IPROC || COMPILE_TEST
368 Say Y here if you want to add support for the IPROC touch
369 controller to your system.
373 To compile this driver as a module, choose M here: the
374 module will be called bcm_iproc_tsc.
376 config TOUCHSCREEN_S3C2410
377 tristate "Samsung S3C2410/generic touchscreen input driver"
378 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
381 Say Y here if you have the s3c2410 touchscreen.
385 To compile this driver as a module, choose M here: the
386 module will be called s3c2410_ts.
388 config TOUCHSCREEN_GUNZE
389 tristate "Gunze AHL-51S touchscreen"
392 Say Y here if you have the Gunze AHL-51 touchscreen connected to
397 To compile this driver as a module, choose M here: the
398 module will be called gunze.
400 config TOUCHSCREEN_ELAN
401 tristate "Elan eKTH I2C touchscreen"
404 Say Y here if you have an Elan eKTH I2C touchscreen
405 connected to your system.
409 To compile this driver as a module, choose M here: the
410 module will be called elants_i2c.
412 config TOUCHSCREEN_ELO
413 tristate "Elo serial touchscreens"
416 Say Y here if you have an Elo serial touchscreen connected to
421 To compile this driver as a module, choose M here: the
422 module will be called elo.
424 config TOUCHSCREEN_WACOM_W8001
425 tristate "Wacom W8001 penabled serial touchscreen"
428 Say Y here if you have an Wacom W8001 penabled serial touchscreen
429 connected to your system.
433 To compile this driver as a module, choose M here: the
434 module will be called wacom_w8001.
436 config TOUCHSCREEN_WACOM_I2C
437 tristate "Wacom Tablet support (I2C)"
440 Say Y here if you want to use the I2C version of the Wacom
445 To compile this driver as a module, choose M here: the module
446 will be called wacom_i2c.
448 config TOUCHSCREEN_LPC32XX
449 tristate "LPC32XX touchscreen controller"
450 depends on ARCH_LPC32XX
452 Say Y here if you have a LPC32XX device and want
453 to support the built-in touchscreen.
455 To compile this driver as a module, choose M here: the
456 module will be called lpc32xx_ts.
458 config TOUCHSCREEN_MAX11801
459 tristate "MAX11801 based touchscreens"
462 Say Y here if you have a MAX11801 based touchscreen
467 To compile this driver as a module, choose M here: the
468 module will be called max11801_ts.
470 config TOUCHSCREEN_MCS5000
471 tristate "MELFAS MCS-5000 touchscreen"
474 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
479 To compile this driver as a module, choose M here: the
480 module will be called mcs5000_ts.
482 config TOUCHSCREEN_MMS114
483 tristate "MELFAS MMS114 touchscreen"
486 Say Y here if you have the MELFAS MMS114 touchscreen controller
491 To compile this driver as a module, choose M here: the
492 module will be called mms114.
494 config TOUCHSCREEN_MELFAS_MIP4
495 tristate "MELFAS MIP4 Touchscreen"
498 Say Y here if you have a MELFAS MIP4 Touchscreen device.
502 To compile this driver as a module, choose M here:
503 the module will be called melfas_mip4.
505 config TOUCHSCREEN_MTOUCH
506 tristate "MicroTouch serial touchscreens"
509 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
514 To compile this driver as a module, choose M here: the
515 module will be called mtouch.
517 config TOUCHSCREEN_IMX6UL_TSC
518 tristate "Freescale i.MX6UL touchscreen controller"
519 depends on (OF && GPIOLIB) || COMPILE_TEST
521 Say Y here if you have a Freescale i.MX6UL, and want to
522 use the internal touchscreen controller.
526 To compile this driver as a module, choose M here: the
527 module will be called imx6ul_tsc.
529 config TOUCHSCREEN_INEXIO
530 tristate "iNexio serial touchscreens"
533 Say Y here if you have an iNexio serial touchscreen connected to
538 To compile this driver as a module, choose M here: the
539 module will be called inexio.
541 config TOUCHSCREEN_INTEL_MID
542 tristate "Intel MID platform resistive touchscreen"
543 depends on INTEL_SCU_IPC
545 Say Y here if you have a Intel MID based touchscreen in
550 To compile this driver as a module, choose M here: the
551 module will be called intel_mid_touch.
553 config TOUCHSCREEN_MK712
554 tristate "ICS MicroClock MK712 touchscreen"
556 Say Y here if you have the ICS MicroClock MK712 touchscreen
557 controller chip in your system.
561 To compile this driver as a module, choose M here: the
562 module will be called mk712.
564 config TOUCHSCREEN_HP600
565 tristate "HP Jornada 6xx touchscreen"
566 depends on SH_HP6XX && SH_ADC
568 Say Y here if you have a HP Jornada 620/660/680/690 and want to
569 support the built-in touchscreen.
571 To compile this driver as a module, choose M here: the
572 module will be called hp680_ts_input.
574 config TOUCHSCREEN_HP7XX
575 tristate "HP Jornada 7xx touchscreen"
576 depends on SA1100_JORNADA720_SSP
578 Say Y here if you have a HP Jornada 710/720/728 and want
579 to support the built-in touchscreen.
581 To compile this driver as a module, choose M here: the
582 module will be called jornada720_ts.
584 config TOUCHSCREEN_IPAQ_MICRO
585 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
586 depends on MFD_IPAQ_MICRO
588 Say Y here to enable support for the touchscreen attached to
589 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
593 To compile this driver as a module, choose M here: the
594 module will be called ipaq-micro-ts.
596 config TOUCHSCREEN_HTCPEN
597 tristate "HTC Shift X9500 touchscreen"
600 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
601 Clio / Shangrila and want to support the built-in touchscreen.
605 To compile this driver as a module, choose M here: the
606 module will be called htcpen.
608 config TOUCHSCREEN_PENMOUNT
609 tristate "Penmount serial touchscreen"
612 Say Y here if you have a Penmount serial touchscreen connected to
617 To compile this driver as a module, choose M here: the
618 module will be called penmount.
620 config TOUCHSCREEN_EDT_FT5X06
621 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
624 Say Y here if you have an EDT "Polytouch" touchscreen based
625 on the FocalTech FT5x06 family of controllers connected to
630 To compile this driver as a module, choose M here: the
631 module will be called edt-ft5x06.
633 config TOUCHSCREEN_MIGOR
634 tristate "Renesas MIGO-R touchscreen"
635 depends on SH_MIGOR && I2C
637 Say Y here to enable MIGO-R touchscreen support.
641 To compile this driver as a module, choose M here: the
642 module will be called migor_ts.
644 config TOUCHSCREEN_TOUCHRIGHT
645 tristate "Touchright serial touchscreen"
648 Say Y here if you have a Touchright serial touchscreen connected to
653 To compile this driver as a module, choose M here: the
654 module will be called touchright.
656 config TOUCHSCREEN_TOUCHWIN
657 tristate "Touchwin serial touchscreen"
660 Say Y here if you have a Touchwin serial touchscreen connected to
665 To compile this driver as a module, choose M here: the
666 module will be called touchwin.
668 config TOUCHSCREEN_TI_AM335X_TSC
669 tristate "TI Touchscreen Interface"
670 depends on MFD_TI_AM335X_TSCADC
672 Say Y here if you have 4/5/8 wire touchscreen controller
673 to be connected to the ADC controller on your TI AM335x SoC.
677 To compile this driver as a module, choose M here: the
678 module will be called ti_am335x_tsc.
680 config TOUCHSCREEN_UCB1400
681 tristate "Philips UCB1400 touchscreen"
683 depends on UCB1400_CORE
685 This enables support for the Philips UCB1400 touchscreen interface.
686 The UCB1400 is an AC97 audio codec. The touchscreen interface
687 will be initialized only after the ALSA subsystem has been
688 brought up and the UCB1400 detected. You therefore have to
689 configure ALSA support as well (either built-in or modular,
690 independently of whether this driver is itself built-in or
691 modular) for this driver to work.
693 To compile this driver as a module, choose M here: the
694 module will be called ucb1400_ts.
696 config TOUCHSCREEN_PIXCIR
697 tristate "PIXCIR I2C touchscreens"
700 Say Y here if you have a pixcir i2c touchscreen
705 To compile this driver as a module, choose M here: the
706 module will be called pixcir_i2c_ts.
708 config TOUCHSCREEN_WDT87XX_I2C
709 tristate "Weida HiTech I2C touchscreen"
712 Say Y here if you have a Weida WDT87XX I2C touchscreen
713 connected to your system.
717 To compile this driver as a module, choose M here: the
718 module will be called wdt87xx_i2c.
720 config TOUCHSCREEN_WM831X
721 tristate "Support for WM831x touchscreen controllers"
722 depends on MFD_WM831X
724 This enables support for the touchscreen controller on the WM831x
727 To compile this driver as a module, choose M here: the
728 module will be called wm831x-ts.
730 config TOUCHSCREEN_WM97XX
731 tristate "Support for WM97xx AC97 touchscreen controllers"
734 Say Y here if you have a Wolfson Microelectronics WM97xx
735 touchscreen connected to your system. Note that this option
736 only enables core driver, you will also need to select
737 support for appropriate chip below.
741 To compile this driver as a module, choose M here: the
742 module will be called wm97xx-ts.
744 config TOUCHSCREEN_WM9705
745 bool "WM9705 Touchscreen interface support"
746 depends on TOUCHSCREEN_WM97XX
749 Say Y here to enable support for the Wolfson Microelectronics
750 WM9705 touchscreen controller.
752 config TOUCHSCREEN_WM9712
753 bool "WM9712 Touchscreen interface support"
754 depends on TOUCHSCREEN_WM97XX
757 Say Y here to enable support for the Wolfson Microelectronics
758 WM9712 touchscreen controller.
760 config TOUCHSCREEN_WM9713
761 bool "WM9713 Touchscreen interface support"
762 depends on TOUCHSCREEN_WM97XX
765 Say Y here to enable support for the Wolfson Microelectronics
766 WM9713 touchscreen controller.
768 config TOUCHSCREEN_WM97XX_ATMEL
769 tristate "WM97xx Atmel accelerated touch"
770 depends on TOUCHSCREEN_WM97XX && AVR32
772 Say Y here for support for streaming mode with WM97xx touchscreens
773 on Atmel AT91 or AVR32 systems with an AC97C module.
775 Be aware that this will use channel B in the controller for
776 streaming data, this must not conflict with other AC97C drivers.
780 To compile this driver as a module, choose M here: the module will
781 be called atmel-wm97xx.
783 config TOUCHSCREEN_WM97XX_MAINSTONE
784 tristate "WM97xx Mainstone/Palm accelerated touch"
785 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
787 Say Y here for support for streaming mode with WM97xx touchscreens
788 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
792 To compile this driver as a module, choose M here: the
793 module will be called mainstone-wm97xx.
795 config TOUCHSCREEN_WM97XX_ZYLONITE
796 tristate "Zylonite accelerated touch"
797 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
798 select TOUCHSCREEN_WM9713
800 Say Y here for support for streaming mode with the touchscreen
805 To compile this driver as a module, choose M here: the
806 module will be called zylonite-wm97xx.
808 config TOUCHSCREEN_USB_COMPOSITE
809 tristate "USB Touchscreen Driver"
810 depends on USB_ARCH_HAS_HCD
813 USB Touchscreen driver for:
814 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
815 - PanJit TouchSet USB
816 - 3M MicroTouch USB (EX II series)
818 - some other eTurboTouch
821 - IRTOUCHSYSTEMS/UNITOP
823 - GoTop Super_Q2/GogoPen/PenPower tablets
824 - JASTEC USB Touch Controller/DigiTech DTR-02U
825 - Zytronic controllers
826 - Elo TouchSystems 2700 IntelliTouch
827 - EasyTouch USB Touch Controller from Data Modul
828 - e2i (Mimo monitors)
830 Have a look at <http://linux.chapter7.ch/touchkit/> for
831 a usage description and the required user-space stuff.
833 To compile this driver as a module, choose M here: the
834 module will be called usbtouchscreen.
836 config TOUCHSCREEN_MC13783
837 tristate "Freescale MC13783 touchscreen input driver"
838 depends on MFD_MC13XXX
840 Say Y here if you have an Freescale MC13783 PMIC on your
841 board and want to use its touchscreen
845 To compile this driver as a module, choose M here: the
846 module will be called mc13783_ts.
848 config TOUCHSCREEN_USB_EGALAX
850 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
851 depends on TOUCHSCREEN_USB_COMPOSITE
853 config TOUCHSCREEN_USB_PANJIT
855 bool "PanJit device support" if EXPERT
856 depends on TOUCHSCREEN_USB_COMPOSITE
858 config TOUCHSCREEN_USB_3M
860 bool "3M/Microtouch EX II series device support" if EXPERT
861 depends on TOUCHSCREEN_USB_COMPOSITE
863 config TOUCHSCREEN_USB_ITM
865 bool "ITM device support" if EXPERT
866 depends on TOUCHSCREEN_USB_COMPOSITE
868 config TOUCHSCREEN_USB_ETURBO
870 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
871 depends on TOUCHSCREEN_USB_COMPOSITE
873 config TOUCHSCREEN_USB_GUNZE
875 bool "Gunze AHL61 device support" if EXPERT
876 depends on TOUCHSCREEN_USB_COMPOSITE
878 config TOUCHSCREEN_USB_DMC_TSC10
880 bool "DMC TSC-10/25 device support" if EXPERT
881 depends on TOUCHSCREEN_USB_COMPOSITE
883 config TOUCHSCREEN_USB_IRTOUCH
885 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
886 depends on TOUCHSCREEN_USB_COMPOSITE
888 config TOUCHSCREEN_USB_IDEALTEK
890 bool "IdealTEK URTC1000 device support" if EXPERT
891 depends on TOUCHSCREEN_USB_COMPOSITE
893 config TOUCHSCREEN_USB_GENERAL_TOUCH
895 bool "GeneralTouch Touchscreen device support" if EXPERT
896 depends on TOUCHSCREEN_USB_COMPOSITE
898 config TOUCHSCREEN_USB_GOTOP
900 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
901 depends on TOUCHSCREEN_USB_COMPOSITE
903 config TOUCHSCREEN_USB_JASTEC
905 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
906 depends on TOUCHSCREEN_USB_COMPOSITE
908 config TOUCHSCREEN_USB_ELO
910 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
911 depends on TOUCHSCREEN_USB_COMPOSITE
913 config TOUCHSCREEN_USB_E2I
915 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
916 depends on TOUCHSCREEN_USB_COMPOSITE
918 config TOUCHSCREEN_USB_ZYTRONIC
920 bool "Zytronic controller" if EXPERT
921 depends on TOUCHSCREEN_USB_COMPOSITE
923 config TOUCHSCREEN_USB_ETT_TC45USB
925 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
926 depends on TOUCHSCREEN_USB_COMPOSITE
928 config TOUCHSCREEN_USB_NEXIO
930 bool "NEXIO/iNexio device support" if EXPERT
931 depends on TOUCHSCREEN_USB_COMPOSITE
933 config TOUCHSCREEN_USB_EASYTOUCH
935 bool "EasyTouch USB Touch controller device support" if EMBEDDED
936 depends on TOUCHSCREEN_USB_COMPOSITE
938 Say Y here if you have an EasyTouch USB Touch controller.
941 config TOUCHSCREEN_TOUCHIT213
942 tristate "Sahara TouchIT-213 touchscreen"
945 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
949 To compile this driver as a module, choose M here: the
950 module will be called touchit213.
952 config TOUCHSCREEN_TS4800
953 tristate "TS-4800 touchscreen"
954 depends on HAS_IOMEM && OF
955 depends on SOC_IMX51 || COMPILE_TEST
959 Say Y here if you have a touchscreen on a TS-4800 board.
961 On TS-4800, the touchscreen is not handled directly by Linux but by
966 To compile this driver as a module, choose M here: the
967 module will be called ts4800_ts.
969 config TOUCHSCREEN_TSC_SERIO
970 tristate "TSC-10/25/40 serial touchscreen support"
973 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
978 To compile this driver as a module, choose M here: the
979 module will be called tsc40.
981 config TOUCHSCREEN_TSC200X_CORE
984 config TOUCHSCREEN_TSC2004
985 tristate "TSC2004 based touchscreens"
988 select TOUCHSCREEN_TSC200X_CORE
990 Say Y here if you have a TSC2004 based touchscreen.
994 To compile this driver as a module, choose M here: the
995 module will be called tsc2004.
997 config TOUCHSCREEN_TSC2005
998 tristate "TSC2005 based touchscreens"
999 depends on SPI_MASTER
1001 select TOUCHSCREEN_TSC200X_CORE
1003 Say Y here if you have a TSC2005 based touchscreen.
1007 To compile this driver as a module, choose M here: the
1008 module will be called tsc2005.
1010 config TOUCHSCREEN_TSC2007
1011 tristate "TSC2007 based touchscreens"
1014 Say Y here if you have a TSC2007 based touchscreen.
1018 To compile this driver as a module, choose M here: the
1019 module will be called tsc2007.
1021 config TOUCHSCREEN_W90X900
1022 tristate "W90P910 touchscreen driver"
1023 depends on ARCH_W90X900
1025 Say Y here if you have a W90P910 based touchscreen.
1027 To compile this driver as a module, choose M here: the
1028 module will be called w90p910_ts.
1030 config TOUCHSCREEN_PCAP
1031 tristate "Motorola PCAP touchscreen"
1034 Say Y here if you have a Motorola EZX telephone and
1035 want to enable support for the built-in touchscreen.
1037 To compile this driver as a module, choose M here: the
1038 module will be called pcap_ts.
1040 config TOUCHSCREEN_ST1232
1041 tristate "Sitronix ST1232 touchscreen controllers"
1044 Say Y here if you want to support Sitronix ST1232
1045 touchscreen controller.
1049 To compile this driver as a module, choose M here: the
1050 module will be called st1232_ts.
1052 config TOUCHSCREEN_STMPE
1053 tristate "STMicroelectronics STMPE touchscreens"
1054 depends on MFD_STMPE
1055 depends on (OF || COMPILE_TEST)
1057 Say Y here if you want support for STMicroelectronics
1058 STMPE touchscreen controllers.
1060 To compile this driver as a module, choose M here: the
1061 module will be called stmpe-ts.
1063 config TOUCHSCREEN_SUN4I
1064 tristate "Allwinner sun4i resistive touchscreen controller support"
1065 depends on ARCH_SUNXI || COMPILE_TEST
1067 depends on THERMAL || !THERMAL_OF
1069 This selects support for the resistive touchscreen controller
1070 found on Allwinner sunxi SoCs.
1072 To compile this driver as a module, choose M here: the
1073 module will be called sun4i-ts.
1075 config TOUCHSCREEN_SUR40
1076 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1077 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1078 depends on VIDEO_V4L2
1079 select INPUT_POLLDEV
1080 select VIDEOBUF2_DMA_SG
1082 Say Y here if you want support for the Samsung SUR40 touchscreen
1083 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1085 To compile this driver as a module, choose M here: the
1086 module will be called sur40.
1088 config TOUCHSCREEN_SX8654
1089 tristate "Semtech SX8654 touchscreen"
1092 Say Y here if you have a Semtech SX8654 touchscreen controller.
1096 To compile this driver as a module, choose M here: the
1097 module will be called sx8654.
1099 config TOUCHSCREEN_TPS6507X
1100 tristate "TPS6507x based touchscreens"
1102 select INPUT_POLLDEV
1104 Say Y here if you have a TPS6507x based touchscreen
1109 To compile this driver as a module, choose M here: the
1110 module will be called tps6507x_ts.
1112 config TOUCHSCREEN_ZFORCE
1113 tristate "Neonode zForce infrared touchscreens"
1115 depends on GPIOLIB || COMPILE_TEST
1117 Say Y here if you have a touchscreen using the zforce
1118 infraread technology from Neonode.
1122 To compile this driver as a module, choose M here: the
1123 module will be called zforce_ts.
1125 config TOUCHSCREEN_COLIBRI_VF50
1126 tristate "Toradex Colibri on board touchscreen driver"
1127 depends on IIO && VF610_ADC
1128 depends on GPIOLIB || COMPILE_TEST
1130 Say Y here if you have a Colibri VF50 and plan to use
1131 the on-board provided 4-wire touchscreen driver.
1135 To compile this driver as a module, choose M here: the
1136 module will be called colibri_vf50_ts.
1138 config TOUCHSCREEN_ROHM_BU21023
1139 tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1142 Say Y here if you have a touchscreen using ROHM BU21023/24.
1146 To compile this driver as a module, choose M here: the
1147 module will be called bu21023_ts.