drivers/leds/leds-blinkm.c

   1 /*
   2  *  leds-blinkm.c
   3  *  (c) Jan-Simon Möller (dl9pf@gmx.de)
   4  *
   5  *  This program is free software; you can redistribute it and/or modify
   6  *  it under the terms of the GNU General Public License as published by
   7  *  the Free Software Foundation; either version 2 of the License, or
   8  *  (at your option) any later version.
   9  *
  10  *  This program is distributed in the hope that it will be useful,
  11  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  *  GNU General Public License for more details.
  14  *
  15  *  You should have received a copy of the GNU General Public License
  16  *  along with this program; if not, write to the Free Software
  17  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18  */
  19
  20 #include <linux/module.h>
  21 #include <linux/slab.h>
  22 #include <linux/jiffies.h>
  23 #include <linux/i2c.h>
  24 #include <linux/err.h>
  25 #include <linux/mutex.h>
  26 #include <linux/sysfs.h>
  27 #include <linux/printk.h>
  28 #include <linux/pm_runtime.h>
  29 #include <linux/leds.h>
  30 #include <linux/delay.h>
  31
  32 /* Addresses to scan - BlinkM is on 0x09 by default*/
  33 static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };
  34
  35 static int blinkm_transfer_hw(struct i2c_client *client, int cmd);
  36 static int blinkm_test_run(struct i2c_client *client);
  37
  38 struct blinkm_led {
  39         struct i2c_client *i2c_client;
  40         struct led_classdev led_cdev;
  41         int id;
  42 };
  43
  44 #define cdev_to_blmled(c)          container_of(c, struct blinkm_led, led_cdev)
  45
  46 struct blinkm_data {
  47         struct i2c_client *i2c_client;
  48         struct mutex update_lock;
  49         /* used for led class interface */
  50         struct blinkm_led blinkm_leds[3];
  51         /* used for "blinkm" sysfs interface */
  52         u8 red;                 /* color red */
  53         u8 green;               /* color green */
  54         u8 blue;                /* color blue */
  55         /* next values to use for transfer */
  56         u8 next_red;                    /* color red */
  57         u8 next_green;          /* color green */
  58         u8 next_blue;           /* color blue */
  59         /* internal use */
  60         u8 args[7];             /* set of args for transmission */
  61         u8 i2c_addr;            /* i2c addr */
  62         u8 fw_ver;              /* firmware version */
  63         /* used, but not from userspace */
  64         u8 hue;                 /* HSB  hue */
  65         u8 saturation;          /* HSB  saturation */
  66         u8 brightness;          /* HSB  brightness */
  67         u8 next_hue;                    /* HSB  hue */
  68         u8 next_saturation;             /* HSB  saturation */
  69         u8 next_brightness;             /* HSB  brightness */
  70         /* currently unused / todo */
  71         u8 fade_speed;          /* fade speed     1 - 255 */
  72         s8 time_adjust;         /* time adjust -128 - 127 */
  73         u8 fade:1;              /* fade on = 1, off = 0 */
  74         u8 rand:1;              /* rand fade mode on = 1 */
  75         u8 script_id;           /* script ID */
  76         u8 script_repeats;      /* repeats of script */
  77         u8 script_startline;    /* line to start */
  78 };
  79
  80 /* Colors */
  81 #define RED   0
  82 #define GREEN 1
  83 #define BLUE  2
  84
  85 /* mapping command names to cmd chars - see datasheet */
  86 #define BLM_GO_RGB            0
  87 #define BLM_FADE_RGB          1
  88 #define BLM_FADE_HSB          2
  89 #define BLM_FADE_RAND_RGB     3
  90 #define BLM_FADE_RAND_HSB     4
  91 #define BLM_PLAY_SCRIPT       5
  92 #define BLM_STOP_SCRIPT       6
  93 #define BLM_SET_FADE_SPEED    7
  94 #define BLM_SET_TIME_ADJ      8
  95 #define BLM_GET_CUR_RGB       9
  96 #define BLM_WRITE_SCRIPT_LINE 10
  97 #define BLM_READ_SCRIPT_LINE  11
  98 #define BLM_SET_SCRIPT_LR     12        /* Length & Repeats */
  99 #define BLM_SET_ADDR          13
 100 #define BLM_GET_ADDR          14
 101 #define BLM_GET_FW_VER        15
 102 #define BLM_SET_STARTUP_PARAM 16
 103
 104 /* BlinkM Commands
 105  *  as extracted out of the datasheet:
 106  *
 107  *  cmdchar = command (ascii)
 108  *  cmdbyte = command in hex
 109  *  nr_args = number of arguments (to send)
 110  *  nr_ret  = number of return values (to read)
 111  *  dir = direction (0 = read, 1 = write, 2 = both)
 112  *
 113  */
 114 static const struct {
 115         char cmdchar;
 116         u8 cmdbyte;
 117         u8 nr_args;
 118         u8 nr_ret;
 119         u8 dir:2;
 120 } blinkm_cmds[17] = {
 121   /* cmdchar, cmdbyte, nr_args, nr_ret,  dir */
 122         { 'n', 0x6e, 3, 0, 1},
 123         { 'c', 0x63, 3, 0, 1},
 124         { 'h', 0x68, 3, 0, 1},
 125         { 'C', 0x43, 3, 0, 1},
 126         { 'H', 0x48, 3, 0, 1},
 127         { 'p', 0x70, 3, 0, 1},
 128         { 'o', 0x6f, 0, 0, 1},
 129         { 'f', 0x66, 1, 0, 1},
 130         { 't', 0x74, 1, 0, 1},
 131         { 'g', 0x67, 0, 3, 0},
 132         { 'W', 0x57, 7, 0, 1},
 133         { 'R', 0x52, 2, 5, 2},
 134         { 'L', 0x4c, 3, 0, 1},
 135         { 'A', 0x41, 4, 0, 1},
 136         { 'a', 0x61, 0, 1, 0},
 137         { 'Z', 0x5a, 0, 1, 0},
 138         { 'B', 0x42, 5, 0, 1},
 139 };
 140
 141 static ssize_t show_color_common(struct device *dev, char *buf, int color)
 142 {
 143         struct i2c_client *client;
 144         struct blinkm_data *data;
 145         int ret;
 146
 147         client = to_i2c_client(dev);
 148         data = i2c_get_clientdata(client);
 149
 150         ret = blinkm_transfer_hw(client, BLM_GET_CUR_RGB);
 151         if (ret < 0)
 152                 return ret;
 153         switch (color) {
 154         case RED:
 155                 return scnprintf(buf, PAGE_SIZE, "%02X\n", data->red);
 156         case GREEN:
 157                 return scnprintf(buf, PAGE_SIZE, "%02X\n", data->green);
 158         case BLUE:
 159                 return scnprintf(buf, PAGE_SIZE, "%02X\n", data->blue);
 160         default:
 161                 return -EINVAL;
 162         }
 163         return -EINVAL;
 164 }
 165
 166 static int store_color_common(struct device *dev, const char *buf, int color)
 167 {
 168         struct i2c_client *client;
 169         struct blinkm_data *data;
 170         int ret;
 171         u8 value;
 172
 173         client = to_i2c_client(dev);
 174         data = i2c_get_clientdata(client);
 175
 176         ret = kstrtou8(buf, 10, &value);
 177         if (ret < 0) {
 178                 dev_err(dev, "BlinkM: value too large!\n");
 179                 return ret;
 180         }
 181
 182         switch (color) {
 183         case RED:
 184                 data->next_red = value;
 185                 break;
 186         case GREEN:
 187                 data->next_green = value;
 188                 break;
 189         case BLUE:
 190                 data->next_blue = value;
 191                 break;
 192         default:
 193                 return -EINVAL;
 194         }
 195
 196         dev_dbg(dev, "next_red = %d, next_green = %d, next_blue = %d\n",
 197                         data->next_red, data->next_green, data->next_blue);
 198
 199         /* if mode ... */
 200         ret = blinkm_transfer_hw(client, BLM_GO_RGB);
 201         if (ret < 0) {
 202                 dev_err(dev, "BlinkM: can't set RGB\n");
 203                 return ret;
 204         }
 205         return 0;
 206 }
 207
 208 static ssize_t show_red(struct device *dev, struct device_attribute *attr,
 209                         char *buf)
 210 {
 211         return show_color_common(dev, buf, RED);
 212 }
 213
 214 static ssize_t store_red(struct device *dev, struct device_attribute *attr,
 215                          const char *buf, size_t count)
 216 {
 217         int ret;
 218
 219         ret = store_color_common(dev, buf, RED);
 220         if (ret < 0)
 221                 return ret;
 222         return count;
 223 }
 224
 225 static DEVICE_ATTR(red, S_IRUGO | S_IWUSR, show_red, store_red);
 226
 227 static ssize_t show_green(struct device *dev, struct device_attribute *attr,
 228                           char *buf)
 229 {
 230         return show_color_common(dev, buf, GREEN);
 231 }
 232
 233 static ssize_t store_green(struct device *dev, struct device_attribute *attr,
 234                            const char *buf, size_t count)
 235 {
 236
 237         int ret;
 238
 239         ret = store_color_common(dev, buf, GREEN);
 240         if (ret < 0)
 241                 return ret;
 242         return count;
 243 }
 244
 245 static DEVICE_ATTR(green, S_IRUGO | S_IWUSR, show_green, store_green);
 246
 247 static ssize_t show_blue(struct device *dev, struct device_attribute *attr,
 248                          char *buf)
 249 {
 250         return show_color_common(dev, buf, BLUE);
 251 }
 252
 253 static ssize_t store_blue(struct device *dev, struct device_attribute *attr,
 254                           const char *buf, size_t count)
 255 {
 256         int ret;
 257
 258         ret = store_color_common(dev, buf, BLUE);
 259         if (ret < 0)
 260                 return ret;
 261         return count;
 262 }
 263
 264 static DEVICE_ATTR(blue, S_IRUGO | S_IWUSR, show_blue, store_blue);
 265
 266 static ssize_t show_test(struct device *dev, struct device_attribute *attr,
 267                          char *buf)
 268 {
 269         return scnprintf(buf, PAGE_SIZE,
 270                          "#Write into test to start test sequence!#\n");
 271 }
 272
 273 static ssize_t store_test(struct device *dev, struct device_attribute *attr,
 274                           const char *buf, size_t count)
 275 {
 276
 277         struct i2c_client *client;
 278         int ret;
 279         client = to_i2c_client(dev);
 280
 281         /*test */
 282         ret = blinkm_test_run(client);
 283         if (ret < 0)
 284                 return ret;
 285
 286         return count;
 287 }
 288
 289 static DEVICE_ATTR(test, S_IRUGO | S_IWUSR, show_test, store_test);
 290
 291 /* TODO: HSB, fade, timeadj, script ... */
 292
 293 static struct attribute *blinkm_attrs[] = {
 294         &dev_attr_red.attr,
 295         &dev_attr_green.attr,
 296         &dev_attr_blue.attr,
 297         &dev_attr_test.attr,
 298         NULL,
 299 };
 300
 301 static struct attribute_group blinkm_group = {
 302         .name = "blinkm",
 303         .attrs = blinkm_attrs,
 304 };
 305
 306 static int blinkm_write(struct i2c_client *client, int cmd, u8 *arg)
 307 {
 308         int result;
 309         int i;
 310         int arglen = blinkm_cmds[cmd].nr_args;
 311         /* write out cmd to blinkm - always / default step */
 312         result = i2c_smbus_write_byte(client, blinkm_cmds[cmd].cmdbyte);
 313         if (result < 0)
 314                 return result;
 315         /* no args to write out */
 316         if (arglen == 0)
 317                 return 0;
 318
 319         for (i = 0; i < arglen; i++) {
 320                 /* repeat for arglen */
 321                 result = i2c_smbus_write_byte(client, arg[i]);
 322                 if (result < 0)
 323                         return result;
 324         }
 325         return 0;
 326 }
 327
 328 static int blinkm_read(struct i2c_client *client, int cmd, u8 *arg)
 329 {
 330         int result;
 331         int i;
 332         int retlen = blinkm_cmds[cmd].nr_ret;
 333         for (i = 0; i < retlen; i++) {
 334                 /* repeat for retlen */
 335                 result = i2c_smbus_read_byte(client);
 336                 if (result < 0)
 337                         return result;
 338                 arg[i] = result;
 339         }
 340
 341         return 0;
 342 }
 343
 344 static int blinkm_transfer_hw(struct i2c_client *client, int cmd)
 345 {
 346         /* the protocol is simple but non-standard:
 347          * e.g.  cmd 'g' (= 0x67) for "get device address"
 348          * - which defaults to 0x09 - would be the sequence:
 349          *   a) write 0x67 to the device (byte write)
 350          *   b) read the value (0x09) back right after (byte read)
 351          *
 352          * Watch out for "unfinished" sequences (i.e. not enough reads
 353          * or writes after a command. It will make the blinkM misbehave.
 354          * Sequence is key here.
 355          */
 356
 357         /* args / return are in private data struct */
 358         struct blinkm_data *data = i2c_get_clientdata(client);
 359
 360         /* We start hardware transfers which are not to be
 361          * mixed with other commands. Aquire a lock now. */
 362         if (mutex_lock_interruptible(&data->update_lock) < 0)
 363                 return -EAGAIN;
 364
 365         /* switch cmd - usually write before reads */
 366         switch (cmd) {
 367         case BLM_FADE_RAND_RGB:
 368         case BLM_GO_RGB:
 369         case BLM_FADE_RGB:
 370                 data->args[0] = data->next_red;
 371                 data->args[1] = data->next_green;
 372                 data->args[2] = data->next_blue;
 373                 blinkm_write(client, cmd, data->args);
 374                 data->red = data->args[0];
 375                 data->green = data->args[1];
 376                 data->blue = data->args[2];
 377                 break;
 378         case BLM_FADE_HSB:
 379         case BLM_FADE_RAND_HSB:
 380                 data->args[0] = data->next_hue;
 381                 data->args[1] = data->next_saturation;
 382                 data->args[2] = data->next_brightness;
 383                 blinkm_write(client, cmd, data->args);
 384                 data->hue = data->next_hue;
 385                 data->saturation = data->next_saturation;
 386                 data->brightness = data->next_brightness;
 387                 break;
 388         case BLM_PLAY_SCRIPT:
 389                 data->args[0] = data->script_id;
 390                 data->args[1] = data->script_repeats;
 391                 data->args[2] = data->script_startline;
 392                 blinkm_write(client, cmd, data->args);
 393                 break;
 394         case BLM_STOP_SCRIPT:
 395                 blinkm_write(client, cmd, NULL);
 396                 break;
 397         case BLM_GET_CUR_RGB:
 398                 data->args[0] = data->red;
 399                 data->args[1] = data->green;
 400                 data->args[2] = data->blue;
 401                 blinkm_write(client, cmd, NULL);
 402                 blinkm_read(client, cmd, data->args);
 403                 data->red = data->args[0];
 404                 data->green = data->args[1];
 405                 data->blue = data->args[2];
 406                 break;
 407         case BLM_GET_ADDR:
 408                 data->args[0] = data->i2c_addr;
 409                 blinkm_write(client, cmd, NULL);
 410                 blinkm_read(client, cmd, data->args);
 411                 data->i2c_addr = data->args[0];
 412                 break;
 413         case BLM_SET_TIME_ADJ:
 414         case BLM_SET_FADE_SPEED:
 415         case BLM_READ_SCRIPT_LINE:
 416         case BLM_WRITE_SCRIPT_LINE:
 417         case BLM_SET_SCRIPT_LR:
 418         case BLM_SET_ADDR:
 419         case BLM_GET_FW_VER:
 420         case BLM_SET_STARTUP_PARAM:
 421                 dev_err(&client->dev,
 422                                 "BlinkM: cmd %d not implemented yet.\n", cmd);
 423                 break;
 424         default:
 425                 dev_err(&client->dev, "BlinkM: unknown command %d\n", cmd);
 426                 mutex_unlock(&data->update_lock);
 427                 return -EINVAL;
 428         }                       /* end switch(cmd) */
 429
 430         /* transfers done, unlock */
 431         mutex_unlock(&data->update_lock);
 432         return 0;
 433 }
 434
 435 static int blinkm_led_common_set(struct led_classdev *led_cdev,
 436                                  enum led_brightness value, int color)
 437 {
 438         /* led_brightness is 0, 127 or 255 - we just use it here as-is */
 439         struct blinkm_led *led = cdev_to_blmled(led_cdev);
 440         struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);
 441
 442         switch (color) {
 443         case RED:
 444                 /* bail out if there's no change */
 445                 if (data->next_red == (u8) value)
 446                         return 0;
 447                 data->next_red = (u8) value;
 448                 break;
 449         case GREEN:
 450                 /* bail out if there's no change */
 451                 if (data->next_green == (u8) value)
 452                         return 0;
 453                 data->next_green = (u8) value;
 454                 break;
 455         case BLUE:
 456                 /* bail out if there's no change */
 457                 if (data->next_blue == (u8) value)
 458                         return 0;
 459                 data->next_blue = (u8) value;
 460                 break;
 461
 462         default:
 463                 dev_err(&led->i2c_client->dev, "BlinkM: unknown color.\n");
 464                 return -EINVAL;
 465         }
 466
 467         blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB);
 468         dev_dbg(&led->i2c_client->dev,
 469                         "# DONE # next_red = %d, next_green = %d,"
 470                         " next_blue = %d\n",
 471                         data->next_red, data->next_green,
 472                         data->next_blue);
 473         return 0;
 474 }
 475
 476 static int blinkm_led_red_set(struct led_classdev *led_cdev,
 477                                enum led_brightness value)
 478 {
 479         return blinkm_led_common_set(led_cdev, value, RED);
 480 }
 481
 482 static int blinkm_led_green_set(struct led_classdev *led_cdev,
 483                                  enum led_brightness value)
 484 {
 485         return blinkm_led_common_set(led_cdev, value, GREEN);
 486 }
 487
 488 static int blinkm_led_blue_set(struct led_classdev *led_cdev,
 489                                 enum led_brightness value)
 490 {
 491         return blinkm_led_common_set(led_cdev, value, BLUE);
 492 }
 493
 494 static void blinkm_init_hw(struct i2c_client *client)
 495 {
 496         int ret;
 497         ret = blinkm_transfer_hw(client, BLM_STOP_SCRIPT);
 498         ret = blinkm_transfer_hw(client, BLM_GO_RGB);
 499 }
 500
 501 static int blinkm_test_run(struct i2c_client *client)
 502 {
 503         int ret;
 504         struct blinkm_data *data = i2c_get_clientdata(client);
 505
 506         data->next_red = 0x01;
 507         data->next_green = 0x05;
 508         data->next_blue = 0x10;
 509         ret = blinkm_transfer_hw(client, BLM_GO_RGB);
 510         if (ret < 0)
 511                 return ret;
 512         msleep(2000);
 513
 514         data->next_red = 0x25;
 515         data->next_green = 0x10;
 516         data->next_blue = 0x31;
 517         ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
 518         if (ret < 0)
 519                 return ret;
 520         msleep(2000);
 521
 522         data->next_hue = 0x50;
 523         data->next_saturation = 0x10;
 524         data->next_brightness = 0x20;
 525         ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
 526         if (ret < 0)
 527                 return ret;
 528         msleep(2000);
 529
 530         return 0;
 531 }
 532
 533 /* Return 0 if detection is successful, -ENODEV otherwise */
 534 static int blinkm_detect(struct i2c_client *client, struct i2c_board_info *info)
 535 {
 536         struct i2c_adapter *adapter = client->adapter;
 537         int ret;
 538         int count = 99;
 539         u8 tmpargs[7];
 540
 541         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
 542                                      | I2C_FUNC_SMBUS_WORD_DATA
 543                                      | I2C_FUNC_SMBUS_WRITE_BYTE))
 544                 return -ENODEV;
 545
 546         /* Now, we do the remaining detection. Simple for now. */
 547         /* We might need more guards to protect other i2c slaves */
 548
 549         /* make sure the blinkM is balanced (read/writes) */
 550         while (count > 0) {
 551                 ret = blinkm_write(client, BLM_GET_ADDR, NULL);
 552                 usleep_range(5000, 10000);
 553                 ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
 554                 usleep_range(5000, 10000);
 555                 if (tmpargs[0] == 0x09)
 556                         count = 0;
 557                 count--;
 558         }
 559
 560         /* Step 1: Read BlinkM address back  -  cmd_char 'a' */
 561         ret = blinkm_write(client, BLM_GET_ADDR, NULL);
 562         if (ret < 0)
 563                 return ret;
 564         usleep_range(20000, 30000);     /* allow a small delay */
 565         ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
 566         if (ret < 0)
 567                 return ret;
 568
 569         if (tmpargs[0] != 0x09) {
 570                 dev_err(&client->dev, "enodev DEV ADDR = 0x%02X\n", tmpargs[0]);
 571                 return -ENODEV;
 572         }
 573
 574         strlcpy(info->type, "blinkm", I2C_NAME_SIZE);
 575         return 0;
 576 }
 577
 578 static int blinkm_probe(struct i2c_client *client,
 579                         const struct i2c_device_id *id)
 580 {
 581         struct blinkm_data *data;
 582         struct blinkm_led *led[3];
 583         int err, i;
 584         char blinkm_led_name[28];
 585
 586         data = devm_kzalloc(&client->dev,
 587                         sizeof(struct blinkm_data), GFP_KERNEL);
 588         if (!data) {
 589                 err = -ENOMEM;
 590                 goto exit;
 591         }
 592
 593         data->i2c_addr = 0x09;
 594         data->i2c_addr = 0x08;
 595         /* i2c addr  - use fake addr of 0x08 initially (real is 0x09) */
 596         data->fw_ver = 0xfe;
 597         /* firmware version - use fake until we read real value
 598          * (currently broken - BlinkM confused!) */
 599         data->script_id = 0x01;
 600         data->i2c_client = client;
 601
 602         i2c_set_clientdata(client, data);
 603         mutex_init(&data->update_lock);
 604
 605         /* Register sysfs hooks */
 606         err = sysfs_create_group(&client->dev.kobj, &blinkm_group);
 607         if (err < 0) {
 608                 dev_err(&client->dev, "couldn't register sysfs group\n");
 609                 goto exit;
 610         }
 611
 612         for (i = 0; i < 3; i++) {
 613                 /* RED = 0, GREEN = 1, BLUE = 2 */
 614                 led[i] = &data->blinkm_leds[i];
 615                 led[i]->i2c_client = client;
 616                 led[i]->id = i;
 617                 led[i]->led_cdev.max_brightness = 255;
 618                 led[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME;
 619                 switch (i) {
 620                 case RED:
 621                         snprintf(blinkm_led_name, sizeof(blinkm_led_name),
 622                                          "blinkm-%d-%d-red",
 623                                          client->adapter->nr,
 624                                          client->addr);
 625                         led[i]->led_cdev.name = blinkm_led_name;
 626                         led[i]->led_cdev.brightness_set_blocking =
 627                                                         blinkm_led_red_set;
 628                         err = led_classdev_register(&client->dev,
 629                                                     &led[i]->led_cdev);
 630                         if (err < 0) {
 631                                 dev_err(&client->dev,
 632                                         "couldn't register LED %s\n",
 633                                         led[i]->led_cdev.name);
 634                                 goto failred;
 635                         }
 636                         break;
 637                 case GREEN:
 638                         snprintf(blinkm_led_name, sizeof(blinkm_led_name),
 639                                          "blinkm-%d-%d-green",
 640                                          client->adapter->nr,
 641                                          client->addr);
 642                         led[i]->led_cdev.name = blinkm_led_name;
 643                         led[i]->led_cdev.brightness_set_blocking =
 644                                                         blinkm_led_green_set;
 645                         err = led_classdev_register(&client->dev,
 646                                                     &led[i]->led_cdev);
 647                         if (err < 0) {
 648                                 dev_err(&client->dev,
 649                                         "couldn't register LED %s\n",
 650                                         led[i]->led_cdev.name);
 651                                 goto failgreen;
 652                         }
 653                         break;
 654                 case BLUE:
 655                         snprintf(blinkm_led_name, sizeof(blinkm_led_name),
 656                                          "blinkm-%d-%d-blue",
 657                                          client->adapter->nr,
 658                                          client->addr);
 659                         led[i]->led_cdev.name = blinkm_led_name;
 660                         led[i]->led_cdev.brightness_set_blocking =
 661                                                         blinkm_led_blue_set;
 662                         err = led_classdev_register(&client->dev,
 663                                                     &led[i]->led_cdev);
 664                         if (err < 0) {
 665                                 dev_err(&client->dev,
 666                                         "couldn't register LED %s\n",
 667                                         led[i]->led_cdev.name);
 668                                 goto failblue;
 669                         }
 670                         break;
 671                 }               /* end switch */
 672         }                       /* end for */
 673
 674         /* Initialize the blinkm */
 675         blinkm_init_hw(client);
 676
 677         return 0;
 678
 679 failblue:
 680         led_classdev_unregister(&led[GREEN]->led_cdev);
 681
 682 failgreen:
 683         led_classdev_unregister(&led[RED]->led_cdev);
 684
 685 failred:
 686         sysfs_remove_group(&client->dev.kobj, &blinkm_group);
 687 exit:
 688         return err;
 689 }
 690
 691 static int blinkm_remove(struct i2c_client *client)
 692 {
 693         struct blinkm_data *data = i2c_get_clientdata(client);
 694         int ret = 0;
 695         int i;
 696
 697         /* make sure no workqueue entries are pending */
 698         for (i = 0; i < 3; i++)
 699                 led_classdev_unregister(&data->blinkm_leds[i].led_cdev);
 700
 701         /* reset rgb */
 702         data->next_red = 0x00;
 703         data->next_green = 0x00;
 704         data->next_blue = 0x00;
 705         ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
 706         if (ret < 0)
 707                 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
 708
 709         /* reset hsb */
 710         data->next_hue = 0x00;
 711         data->next_saturation = 0x00;
 712         data->next_brightness = 0x00;
 713         ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
 714         if (ret < 0)
 715                 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
 716
 717         /* red fade to off */
 718         data->next_red = 0xff;
 719         ret = blinkm_transfer_hw(client, BLM_GO_RGB);
 720         if (ret < 0)
 721                 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
 722
 723         /* off */
 724         data->next_red = 0x00;
 725         ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
 726         if (ret < 0)
 727                 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
 728
 729         sysfs_remove_group(&client->dev.kobj, &blinkm_group);
 730         return 0;
 731 }
 732
 733 static const struct i2c_device_id blinkm_id[] = {
 734         {"blinkm", 0},
 735         {}
 736 };
 737
 738 MODULE_DEVICE_TABLE(i2c, blinkm_id);
 739
 740   /* This is the driver that will be inserted */
 741 static struct i2c_driver blinkm_driver = {
 742         .class = I2C_CLASS_HWMON,
 743         .driver = {
 744                    .name = "blinkm",
 745                    },
 746         .probe = blinkm_probe,
 747         .remove = blinkm_remove,
 748         .id_table = blinkm_id,
 749         .detect = blinkm_detect,
 750         .address_list = normal_i2c,
 751 };
 752
 753 module_i2c_driver(blinkm_driver);
 754
 755 MODULE_AUTHOR("Jan-Simon Moeller <dl9pf@gmx.de>");
 756 MODULE_DESCRIPTION("BlinkM RGB LED driver");
 757 MODULE_LICENSE("GPL");
 758