iwlwifi: pcie: fix polling in various places
[cascardo/linux.git] / drivers / media / platform / Kconfig
1 #
2 # Platform drivers
3 #       All drivers here are currently for webcam support
4
5 menuconfig V4L_PLATFORM_DRIVERS
6         bool "V4L platform devices"
7         depends on MEDIA_CAMERA_SUPPORT
8         default n
9         ---help---
10           Say Y here to enable support for platform-specific V4L drivers.
11
12 if V4L_PLATFORM_DRIVERS
13
14 source "drivers/media/platform/marvell-ccic/Kconfig"
15
16 config VIDEO_VIA_CAMERA
17         tristate "VIAFB camera controller support"
18         depends on FB_VIA
19         select VIDEOBUF_DMA_SG
20         select VIDEO_OV7670
21         help
22            Driver support for the integrated camera controller in VIA
23            Chrome9 chipsets.  Currently only tested on OLPC xo-1.5 systems
24            with ov7670 sensors.
25
26 #
27 # Platform multimedia device configuration
28 #
29
30 source "drivers/media/platform/davinci/Kconfig"
31
32 source "drivers/media/platform/omap/Kconfig"
33
34 source "drivers/media/platform/blackfin/Kconfig"
35
36 config VIDEO_SH_VOU
37         tristate "SuperH VOU video output driver"
38         depends on MEDIA_CAMERA_SUPPORT
39         depends on VIDEO_DEV && I2C && HAS_DMA
40         depends on ARCH_SHMOBILE || COMPILE_TEST
41         select VIDEOBUF_DMA_CONTIG
42         help
43           Support for the Video Output Unit (VOU) on SuperH SoCs.
44
45 config VIDEO_VIU
46         tristate "Freescale VIU Video Driver"
47         depends on VIDEO_V4L2 && PPC_MPC512x
48         select VIDEOBUF_DMA_CONTIG
49         default y
50         ---help---
51           Support for Freescale VIU video driver. This device captures
52           video data, or overlays video on DIU frame buffer.
53
54           Say Y here if you want to enable VIU device on MPC5121e Rev2+.
55           In doubt, say N.
56
57 config VIDEO_TIMBERDALE
58         tristate "Support for timberdale Video In/LogiWIN"
59         depends on MFD_TIMBERDALE && VIDEO_V4L2 && I2C && DMADEVICES
60         select DMA_ENGINE
61         select TIMB_DMA
62         select VIDEO_ADV7180
63         select VIDEOBUF_DMA_CONTIG
64         ---help---
65           Add support for the Video In peripherial of the timberdale FPGA.
66
67 config VIDEO_VINO
68         tristate "SGI Vino Video For Linux"
69         depends on I2C && SGI_IP22 && VIDEO_V4L2
70         select VIDEO_SAA7191 if MEDIA_SUBDRV_AUTOSELECT
71         help
72           Say Y here to build in support for the Vino video input system found
73           on SGI Indy machines.
74
75 config VIDEO_M32R_AR
76         tristate "AR devices"
77         depends on M32R && VIDEO_V4L2
78         ---help---
79           This is a video4linux driver for the Renesas AR (Artificial Retina)
80           camera module.
81
82 config VIDEO_M32R_AR_M64278
83         tristate "AR device with color module M64278(VGA)"
84         depends on PLAT_M32700UT
85         select VIDEO_M32R_AR
86         ---help---
87           This is a video4linux driver for the Renesas AR (Artificial
88           Retina) with M64278E-800 camera module.
89           This module supports VGA(640x480 pixels) resolutions.
90
91           To compile this driver as a module, choose M here: the
92           module will be called arv.
93
94 config VIDEO_OMAP3
95         tristate "OMAP 3 Camera support"
96         depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3
97         select ARM_DMA_USE_IOMMU
98         select OMAP_IOMMU
99         select VIDEOBUF2_DMA_CONTIG
100         ---help---
101           Driver for an OMAP 3 camera controller.
102
103 config VIDEO_OMAP3_DEBUG
104         bool "OMAP 3 Camera debug messages"
105         depends on VIDEO_OMAP3
106         ---help---
107           Enable debug messages on OMAP 3 camera controller driver.
108
109 config VIDEO_S3C_CAMIF
110         tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
111         depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
112         depends on (ARCH_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
113         select VIDEOBUF2_DMA_CONTIG
114         ---help---
115           This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
116           host interface (CAMIF).
117
118           To compile this driver as a module, choose M here: the module
119           will be called s3c-camif.
120
121 source "drivers/media/platform/soc_camera/Kconfig"
122 source "drivers/media/platform/exynos4-is/Kconfig"
123 source "drivers/media/platform/s5p-tv/Kconfig"
124
125 endif # V4L_PLATFORM_DRIVERS
126
127 menuconfig V4L_MEM2MEM_DRIVERS
128         bool "Memory-to-memory multimedia devices"
129         depends on VIDEO_V4L2
130         depends on MEDIA_CAMERA_SUPPORT
131         default n
132         ---help---
133           Say Y here to enable selecting drivers for V4L devices that
134           use system memory for both source and destination buffers, as opposed
135           to capture and output drivers, which use memory buffers for just
136           one of those.
137
138 if V4L_MEM2MEM_DRIVERS
139
140 config VIDEO_CODA
141         tristate "Chips&Media Coda multi-standard codec IP"
142         depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC
143         select SRAM
144         select VIDEOBUF2_DMA_CONTIG
145         select V4L2_MEM2MEM_DEV
146         select GENERIC_ALLOCATOR
147         ---help---
148            Coda is a range of video codec IPs that supports
149            H.264, MPEG-4, and other video formats.
150
151 config VIDEO_MEM2MEM_DEINTERLACE
152         tristate "Deinterlace support"
153         depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE
154         select VIDEOBUF2_DMA_CONTIG
155         select V4L2_MEM2MEM_DEV
156         help
157             Generic deinterlacing V4L2 driver.
158
159 config VIDEO_SAMSUNG_S5P_G2D
160         tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
161         depends on VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS)
162         select VIDEOBUF2_DMA_CONTIG
163         select V4L2_MEM2MEM_DEV
164         default n
165         ---help---
166           This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
167           2d graphics accelerator.
168
169 config VIDEO_SAMSUNG_S5P_JPEG
170         tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver"
171         depends on VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS)
172         select VIDEOBUF2_DMA_CONTIG
173         select V4L2_MEM2MEM_DEV
174         ---help---
175           This is a v4l2 driver for Samsung S5P, EXYNOS3250
176           and EXYNOS4 JPEG codec
177
178 config VIDEO_SAMSUNG_S5P_MFC
179         tristate "Samsung S5P MFC Video Codec"
180         depends on VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS)
181         select VIDEOBUF2_DMA_CONTIG
182         default n
183         help
184             MFC 5.1 and 6.x driver for V4L2
185
186 config VIDEO_MX2_EMMAPRP
187         tristate "MX2 eMMa-PrP support"
188         depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27
189         select VIDEOBUF2_DMA_CONTIG
190         select V4L2_MEM2MEM_DEV
191         help
192             MX2X chips have a PrP that can be used to process buffers from
193             memory to memory. Operations include resizing and format
194             conversion.
195
196 config VIDEO_SAMSUNG_EXYNOS_GSC
197         tristate "Samsung Exynos G-Scaler driver"
198         depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_EXYNOS5
199         select VIDEOBUF2_DMA_CONTIG
200         select V4L2_MEM2MEM_DEV
201         help
202           This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler.
203
204 config VIDEO_SH_VEU
205         tristate "SuperH VEU mem2mem video processing driver"
206         depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
207         select VIDEOBUF2_DMA_CONTIG
208         select V4L2_MEM2MEM_DEV
209         help
210             Support for the Video Engine Unit (VEU) on SuperH and
211             SH-Mobile SoCs.
212
213 config VIDEO_RENESAS_VSP1
214         tristate "Renesas VSP1 Video Processing Engine"
215         depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA
216         select VIDEOBUF2_DMA_CONTIG
217         ---help---
218           This is a V4L2 driver for the Renesas VSP1 video processing engine.
219
220           To compile this driver as a module, choose M here: the module
221           will be called vsp1.
222
223 config VIDEO_TI_VPE
224         tristate "TI VPE (Video Processing Engine) driver"
225         depends on VIDEO_DEV && VIDEO_V4L2 && SOC_DRA7XX
226         select VIDEOBUF2_DMA_CONTIG
227         select V4L2_MEM2MEM_DEV
228         default n
229         ---help---
230           Support for the TI VPE(Video Processing Engine) block
231           found on DRA7XX SoC.
232
233 config VIDEO_TI_VPE_DEBUG
234         bool "VPE debug messages"
235         depends on VIDEO_TI_VPE
236         ---help---
237           Enable debug messages on VPE driver.
238
239 endif # V4L_MEM2MEM_DRIVERS
240
241 menuconfig V4L_TEST_DRIVERS
242         bool "Media test drivers"
243         depends on MEDIA_CAMERA_SUPPORT
244
245 if V4L_TEST_DRIVERS
246 config VIDEO_VIVI
247         tristate "Virtual Video Driver"
248         depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
249         select FONT_SUPPORT
250         select FONT_8x16
251         select VIDEOBUF2_VMALLOC
252         default n
253         ---help---
254           Enables a virtual video driver. This device shows a color bar
255           and a timestamp, as a real device would generate by using V4L2
256           api.
257           Say Y here if you want to test video apps or debug V4L devices.
258           In doubt, say N.
259
260 config VIDEO_MEM2MEM_TESTDEV
261         tristate "Virtual test device for mem2mem framework"
262         depends on VIDEO_DEV && VIDEO_V4L2
263         select VIDEOBUF2_VMALLOC
264         select V4L2_MEM2MEM_DEV
265         default n
266         ---help---
267           This is a virtual test device for the memory-to-memory driver
268           framework.
269 endif #V4L_TEST_DRIVERS