Merge branch 'parisc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
[cascardo/linux.git] / drivers / mfd / intel_msic.c
1 /*
2  * Driver for Intel MSIC
3  *
4  * Copyright (C) 2011, Intel Corporation
5  * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11
12 #include <linux/err.h>
13 #include <linux/gpio.h>
14 #include <linux/io.h>
15 #include <linux/init.h>
16 #include <linux/mfd/core.h>
17 #include <linux/mfd/intel_msic.h>
18 #include <linux/platform_device.h>
19 #include <linux/slab.h>
20
21 #include <asm/intel_scu_ipc.h>
22
23 #define MSIC_VENDOR(id)         ((id >> 6) & 3)
24 #define MSIC_VERSION(id)        (id & 0x3f)
25 #define MSIC_MAJOR(id)          ('A' + ((id >> 3) & 7))
26 #define MSIC_MINOR(id)          (id & 7)
27
28 /*
29  * MSIC interrupt tree is readable from SRAM at INTEL_MSIC_IRQ_PHYS_BASE.
30  * Since IRQ block starts from address 0x002 we need to subtract that from
31  * the actual IRQ status register address.
32  */
33 #define MSIC_IRQ_STATUS(x)      (INTEL_MSIC_IRQ_PHYS_BASE + ((x) - 2))
34 #define MSIC_IRQ_STATUS_ACCDET  MSIC_IRQ_STATUS(INTEL_MSIC_ACCDET)
35
36 /*
37  * The SCU hardware has limitation of 16 bytes per read/write buffer on
38  * Medfield.
39  */
40 #define SCU_IPC_RWBUF_LIMIT     16
41
42 /**
43  * struct intel_msic - an MSIC MFD instance
44  * @pdev: pointer to the platform device
45  * @vendor: vendor ID
46  * @version: chip version
47  * @irq_base: base address of the mapped MSIC SRAM interrupt tree
48  */
49 struct intel_msic {
50         struct platform_device          *pdev;
51         unsigned                        vendor;
52         unsigned                        version;
53         void __iomem                    *irq_base;
54 };
55
56 static struct resource msic_touch_resources[] = {
57         {
58                 .flags          = IORESOURCE_IRQ,
59         },
60 };
61
62 static struct resource msic_adc_resources[] = {
63         {
64                 .flags          = IORESOURCE_IRQ,
65         },
66 };
67
68 static struct resource msic_battery_resources[] = {
69         {
70                 .flags          = IORESOURCE_IRQ,
71         },
72 };
73
74 static struct resource msic_gpio_resources[] = {
75         {
76                 .flags          = IORESOURCE_IRQ,
77         },
78 };
79
80 static struct resource msic_audio_resources[] = {
81         {
82                 .name           = "IRQ",
83                 .flags          = IORESOURCE_IRQ,
84         },
85         /*
86          * We will pass IRQ_BASE to the driver now but this can be removed
87          * when/if the driver starts to use intel_msic_irq_read().
88          */
89         {
90                 .name           = "IRQ_BASE",
91                 .flags          = IORESOURCE_MEM,
92                 .start          = MSIC_IRQ_STATUS_ACCDET,
93                 .end            = MSIC_IRQ_STATUS_ACCDET,
94         },
95 };
96
97 static struct resource msic_hdmi_resources[] = {
98         {
99                 .flags          = IORESOURCE_IRQ,
100         },
101 };
102
103 static struct resource msic_thermal_resources[] = {
104         {
105                 .flags          = IORESOURCE_IRQ,
106         },
107 };
108
109 static struct resource msic_power_btn_resources[] = {
110         {
111                 .flags          = IORESOURCE_IRQ,
112         },
113 };
114
115 static struct resource msic_ocd_resources[] = {
116         {
117                 .flags          = IORESOURCE_IRQ,
118         },
119 };
120
121 /*
122  * Devices that are part of the MSIC and are available via firmware
123  * populated SFI DEVS table.
124  */
125 static struct mfd_cell msic_devs[] = {
126         [INTEL_MSIC_BLOCK_TOUCH]        = {
127                 .name                   = "msic_touch",
128                 .num_resources          = ARRAY_SIZE(msic_touch_resources),
129                 .resources              = msic_touch_resources,
130         },
131         [INTEL_MSIC_BLOCK_ADC]          = {
132                 .name                   = "msic_adc",
133                 .num_resources          = ARRAY_SIZE(msic_adc_resources),
134                 .resources              = msic_adc_resources,
135         },
136         [INTEL_MSIC_BLOCK_BATTERY]      = {
137                 .name                   = "msic_battery",
138                 .num_resources          = ARRAY_SIZE(msic_battery_resources),
139                 .resources              = msic_battery_resources,
140         },
141         [INTEL_MSIC_BLOCK_GPIO]         = {
142                 .name                   = "msic_gpio",
143                 .num_resources          = ARRAY_SIZE(msic_gpio_resources),
144                 .resources              = msic_gpio_resources,
145         },
146         [INTEL_MSIC_BLOCK_AUDIO]        = {
147                 .name                   = "msic_audio",
148                 .num_resources          = ARRAY_SIZE(msic_audio_resources),
149                 .resources              = msic_audio_resources,
150         },
151         [INTEL_MSIC_BLOCK_HDMI]         = {
152                 .name                   = "msic_hdmi",
153                 .num_resources          = ARRAY_SIZE(msic_hdmi_resources),
154                 .resources              = msic_hdmi_resources,
155         },
156         [INTEL_MSIC_BLOCK_THERMAL]      = {
157                 .name                   = "msic_thermal",
158                 .num_resources          = ARRAY_SIZE(msic_thermal_resources),
159                 .resources              = msic_thermal_resources,
160         },
161         [INTEL_MSIC_BLOCK_POWER_BTN]    = {
162                 .name                   = "msic_power_btn",
163                 .num_resources          = ARRAY_SIZE(msic_power_btn_resources),
164                 .resources              = msic_power_btn_resources,
165         },
166         [INTEL_MSIC_BLOCK_OCD]          = {
167                 .name                   = "msic_ocd",
168                 .num_resources          = ARRAY_SIZE(msic_ocd_resources),
169                 .resources              = msic_ocd_resources,
170         },
171 };
172
173 /*
174  * Other MSIC related devices which are not directly available via SFI DEVS
175  * table. These can be pseudo devices, regulators etc. which are needed for
176  * different purposes.
177  *
178  * These devices appear only after the MSIC driver itself is initialized so
179  * we can guarantee that the SCU IPC interface is ready.
180  */
181 static const struct mfd_cell msic_other_devs[] = {
182         /* Audio codec in the MSIC */
183         {
184                 .id                     = -1,
185                 .name                   = "sn95031",
186         },
187 };
188
189 /**
190  * intel_msic_reg_read - read a single MSIC register
191  * @reg: register to read
192  * @val: register value is placed here
193  *
194  * Read a single register from MSIC. Returns %0 on success and negative
195  * errno in case of failure.
196  *
197  * Function may sleep.
198  */
199 int intel_msic_reg_read(unsigned short reg, u8 *val)
200 {
201         return intel_scu_ipc_ioread8(reg, val);
202 }
203 EXPORT_SYMBOL_GPL(intel_msic_reg_read);
204
205 /**
206  * intel_msic_reg_write - write a single MSIC register
207  * @reg: register to write
208  * @val: value to write to that register
209  *
210  * Write a single MSIC register. Returns 0 on success and negative
211  * errno in case of failure.
212  *
213  * Function may sleep.
214  */
215 int intel_msic_reg_write(unsigned short reg, u8 val)
216 {
217         return intel_scu_ipc_iowrite8(reg, val);
218 }
219 EXPORT_SYMBOL_GPL(intel_msic_reg_write);
220
221 /**
222  * intel_msic_reg_update - update a single MSIC register
223  * @reg: register to update
224  * @val: value to write to the register
225  * @mask: specifies which of the bits are updated (%0 = don't update,
226  *        %1 = update)
227  *
228  * Perform an update to a register @reg. @mask is used to specify which
229  * bits are updated. Returns %0 in case of success and negative errno in
230  * case of failure.
231  *
232  * Function may sleep.
233  */
234 int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask)
235 {
236         return intel_scu_ipc_update_register(reg, val, mask);
237 }
238 EXPORT_SYMBOL_GPL(intel_msic_reg_update);
239
240 /**
241  * intel_msic_bulk_read - read an array of registers
242  * @reg: array of register addresses to read
243  * @buf: array where the read values are placed
244  * @count: number of registers to read
245  *
246  * Function reads @count registers from the MSIC using addresses passed in
247  * @reg. Read values are placed in @buf. Reads are performed atomically
248  * wrt. MSIC.
249  *
250  * Returns %0 in case of success and negative errno in case of failure.
251  *
252  * Function may sleep.
253  */
254 int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count)
255 {
256         if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
257                 return -EINVAL;
258
259         return intel_scu_ipc_readv(reg, buf, count);
260 }
261 EXPORT_SYMBOL_GPL(intel_msic_bulk_read);
262
263 /**
264  * intel_msic_bulk_write - write an array of values to the MSIC registers
265  * @reg: array of registers to write
266  * @buf: values to write to each register
267  * @count: number of registers to write
268  *
269  * Function writes @count registers in @buf to MSIC. Writes are performed
270  * atomically wrt MSIC. Returns %0 in case of success and negative errno in
271  * case of failure.
272  *
273  * Function may sleep.
274  */
275 int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count)
276 {
277         if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
278                 return -EINVAL;
279
280         return intel_scu_ipc_writev(reg, buf, count);
281 }
282 EXPORT_SYMBOL_GPL(intel_msic_bulk_write);
283
284 /**
285  * intel_msic_irq_read - read a register from an MSIC interrupt tree
286  * @msic: MSIC instance
287  * @reg: interrupt register (between %INTEL_MSIC_IRQLVL1 and
288  *       %INTEL_MSIC_RESETIRQ2)
289  * @val: value of the register is placed here
290  *
291  * This function can be used by an MSIC subdevice interrupt handler to read
292  * a register value from the MSIC interrupt tree. In this way subdevice
293  * drivers don't have to map in the interrupt tree themselves but can just
294  * call this function instead.
295  *
296  * Function doesn't sleep and is callable from interrupt context.
297  *
298  * Returns %-EINVAL if @reg is outside of the allowed register region.
299  */
300 int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg, u8 *val)
301 {
302         if (WARN_ON(reg < INTEL_MSIC_IRQLVL1 || reg > INTEL_MSIC_RESETIRQ2))
303                 return -EINVAL;
304
305         *val = readb(msic->irq_base + (reg - INTEL_MSIC_IRQLVL1));
306         return 0;
307 }
308 EXPORT_SYMBOL_GPL(intel_msic_irq_read);
309
310 static int intel_msic_init_devices(struct intel_msic *msic)
311 {
312         struct platform_device *pdev = msic->pdev;
313         struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev);
314         int ret, i;
315
316         if (pdata->gpio) {
317                 struct mfd_cell *cell = &msic_devs[INTEL_MSIC_BLOCK_GPIO];
318
319                 cell->platform_data = pdata->gpio;
320                 cell->pdata_size = sizeof(*pdata->gpio);
321         }
322
323         if (pdata->ocd) {
324                 unsigned gpio = pdata->ocd->gpio;
325
326                 ret = devm_gpio_request_one(&pdev->dev, gpio,
327                                         GPIOF_IN, "ocd_gpio");
328                 if (ret) {
329                         dev_err(&pdev->dev, "failed to register OCD GPIO\n");
330                         return ret;
331                 }
332
333                 ret = gpio_to_irq(gpio);
334                 if (ret < 0) {
335                         dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
336                         return ret;
337                 }
338
339                 /* Update the IRQ number for the OCD */
340                 pdata->irq[INTEL_MSIC_BLOCK_OCD] = ret;
341         }
342
343         for (i = 0; i < ARRAY_SIZE(msic_devs); i++) {
344                 if (!pdata->irq[i])
345                         continue;
346
347                 ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
348                                       pdata->irq[i], NULL);
349                 if (ret)
350                         goto fail;
351         }
352
353         ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
354                               ARRAY_SIZE(msic_other_devs), NULL, 0, NULL);
355         if (ret)
356                 goto fail;
357
358         return 0;
359
360 fail:
361         mfd_remove_devices(&pdev->dev);
362
363         return ret;
364 }
365
366 static void intel_msic_remove_devices(struct intel_msic *msic)
367 {
368         struct platform_device *pdev = msic->pdev;
369
370         mfd_remove_devices(&pdev->dev);
371 }
372
373 static int intel_msic_probe(struct platform_device *pdev)
374 {
375         struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev);
376         struct intel_msic *msic;
377         struct resource *res;
378         u8 id0, id1;
379         int ret;
380
381         if (!pdata) {
382                 dev_err(&pdev->dev, "no platform data passed\n");
383                 return -EINVAL;
384         }
385
386         /* First validate that we have an MSIC in place */
387         ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID0, &id0);
388         if (ret) {
389                 dev_err(&pdev->dev, "failed to identify the MSIC chip (ID0)\n");
390                 return -ENXIO;
391         }
392
393         ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID1, &id1);
394         if (ret) {
395                 dev_err(&pdev->dev, "failed to identify the MSIC chip (ID1)\n");
396                 return -ENXIO;
397         }
398
399         if (MSIC_VENDOR(id0) != MSIC_VENDOR(id1)) {
400                 dev_err(&pdev->dev, "invalid vendor ID: %x, %x\n", id0, id1);
401                 return -ENXIO;
402         }
403
404         msic = devm_kzalloc(&pdev->dev, sizeof(*msic), GFP_KERNEL);
405         if (!msic)
406                 return -ENOMEM;
407
408         msic->vendor = MSIC_VENDOR(id0);
409         msic->version = MSIC_VERSION(id0);
410         msic->pdev = pdev;
411
412         /*
413          * Map in the MSIC interrupt tree area in SRAM. This is exposed to
414          * the clients via intel_msic_irq_read().
415          */
416         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
417         msic->irq_base = devm_ioremap_resource(&pdev->dev, res);
418         if (IS_ERR(msic->irq_base))
419                 return PTR_ERR(msic->irq_base);
420
421         platform_set_drvdata(pdev, msic);
422
423         ret = intel_msic_init_devices(msic);
424         if (ret) {
425                 dev_err(&pdev->dev, "failed to initialize MSIC devices\n");
426                 return ret;
427         }
428
429         dev_info(&pdev->dev, "Intel MSIC version %c%d (vendor %#x)\n",
430                  MSIC_MAJOR(msic->version), MSIC_MINOR(msic->version),
431                  msic->vendor);
432
433         return 0;
434 }
435
436 static int intel_msic_remove(struct platform_device *pdev)
437 {
438         struct intel_msic *msic = platform_get_drvdata(pdev);
439
440         intel_msic_remove_devices(msic);
441
442         return 0;
443 }
444
445 static struct platform_driver intel_msic_driver = {
446         .probe          = intel_msic_probe,
447         .remove         = intel_msic_remove,
448         .driver         = {
449                 .name   = "intel_msic",
450         },
451 };
452 builtin_platform_driver(intel_msic_driver);