drivers/mtd/nand/nandsim.c

   1 /*
   2  * NAND flash simulator.
   3  *
   4  * Author: Artem B. Bityuckiy <dedekind@oktetlabs.ru>, <dedekind@infradead.org>
   5  *
   6  * Copyright (C) 2004 Nokia Corporation
   7  *
   8  * Note: NS means "NAND Simulator".
   9  * Note: Input means input TO flash chip, output means output FROM chip.
  10  *
  11  * This program is free software; you can redistribute it and/or modify it
  12  * under the terms of the GNU General Public License as published by the
  13  * Free Software Foundation; either version 2, or (at your option) any later
  14  * version.
  15  *
  16  * This program is distributed in the hope that it will be useful, but
  17  * WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
  19  * Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
  24  */
  25
  26 #include <linux/init.h>
  27 #include <linux/types.h>
  28 #include <linux/module.h>
  29 #include <linux/moduleparam.h>
  30 #include <linux/vmalloc.h>
  31 #include <linux/math64.h>
  32 #include <linux/slab.h>
  33 #include <linux/errno.h>
  34 #include <linux/string.h>
  35 #include <linux/mtd/mtd.h>
  36 #include <linux/mtd/nand.h>
  37 #include <linux/mtd/nand_bch.h>
  38 #include <linux/mtd/partitions.h>
  39 #include <linux/delay.h>
  40 #include <linux/list.h>
  41 #include <linux/random.h>
  42 #include <linux/sched.h>
  43 #include <linux/fs.h>
  44 #include <linux/pagemap.h>
  45 #include <linux/seq_file.h>
  46 #include <linux/debugfs.h>
  47
  48 /* Default simulator parameters values */
  49 #if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE)  || \
  50     !defined(CONFIG_NANDSIM_SECOND_ID_BYTE) || \
  51     !defined(CONFIG_NANDSIM_THIRD_ID_BYTE)  || \
  52     !defined(CONFIG_NANDSIM_FOURTH_ID_BYTE)
  53 #define CONFIG_NANDSIM_FIRST_ID_BYTE  0x98
  54 #define CONFIG_NANDSIM_SECOND_ID_BYTE 0x39
  55 #define CONFIG_NANDSIM_THIRD_ID_BYTE  0xFF /* No byte */
  56 #define CONFIG_NANDSIM_FOURTH_ID_BYTE 0xFF /* No byte */
  57 #endif
  58
  59 #ifndef CONFIG_NANDSIM_ACCESS_DELAY
  60 #define CONFIG_NANDSIM_ACCESS_DELAY 25
  61 #endif
  62 #ifndef CONFIG_NANDSIM_PROGRAMM_DELAY
  63 #define CONFIG_NANDSIM_PROGRAMM_DELAY 200
  64 #endif
  65 #ifndef CONFIG_NANDSIM_ERASE_DELAY
  66 #define CONFIG_NANDSIM_ERASE_DELAY 2
  67 #endif
  68 #ifndef CONFIG_NANDSIM_OUTPUT_CYCLE
  69 #define CONFIG_NANDSIM_OUTPUT_CYCLE 40
  70 #endif
  71 #ifndef CONFIG_NANDSIM_INPUT_CYCLE
  72 #define CONFIG_NANDSIM_INPUT_CYCLE  50
  73 #endif
  74 #ifndef CONFIG_NANDSIM_BUS_WIDTH
  75 #define CONFIG_NANDSIM_BUS_WIDTH  8
  76 #endif
  77 #ifndef CONFIG_NANDSIM_DO_DELAYS
  78 #define CONFIG_NANDSIM_DO_DELAYS  0
  79 #endif
  80 #ifndef CONFIG_NANDSIM_LOG
  81 #define CONFIG_NANDSIM_LOG        0
  82 #endif
  83 #ifndef CONFIG_NANDSIM_DBG
  84 #define CONFIG_NANDSIM_DBG        0
  85 #endif
  86 #ifndef CONFIG_NANDSIM_MAX_PARTS
  87 #define CONFIG_NANDSIM_MAX_PARTS  32
  88 #endif
  89
  90 static uint first_id_byte  = CONFIG_NANDSIM_FIRST_ID_BYTE;
  91 static uint second_id_byte = CONFIG_NANDSIM_SECOND_ID_BYTE;
  92 static uint third_id_byte  = CONFIG_NANDSIM_THIRD_ID_BYTE;
  93 static uint fourth_id_byte = CONFIG_NANDSIM_FOURTH_ID_BYTE;
  94 static uint access_delay   = CONFIG_NANDSIM_ACCESS_DELAY;
  95 static uint programm_delay = CONFIG_NANDSIM_PROGRAMM_DELAY;
  96 static uint erase_delay    = CONFIG_NANDSIM_ERASE_DELAY;
  97 static uint output_cycle   = CONFIG_NANDSIM_OUTPUT_CYCLE;
  98 static uint input_cycle    = CONFIG_NANDSIM_INPUT_CYCLE;
  99 static uint bus_width      = CONFIG_NANDSIM_BUS_WIDTH;
 100 static uint do_delays      = CONFIG_NANDSIM_DO_DELAYS;
 101 static uint log            = CONFIG_NANDSIM_LOG;
 102 static uint dbg            = CONFIG_NANDSIM_DBG;
 103 static unsigned long parts[CONFIG_NANDSIM_MAX_PARTS];
 104 static unsigned int parts_num;
 105 static char *badblocks = NULL;
 106 static char *weakblocks = NULL;
 107 static char *weakpages = NULL;
 108 static unsigned int bitflips = 0;
 109 static char *gravepages = NULL;
 110 static unsigned int overridesize = 0;
 111 static char *cache_file = NULL;
 112 static unsigned int bbt;
 113 static unsigned int bch;
 114
 115 module_param(first_id_byte,  uint, 0400);
 116 module_param(second_id_byte, uint, 0400);
 117 module_param(third_id_byte,  uint, 0400);
 118 module_param(fourth_id_byte, uint, 0400);
 119 module_param(access_delay,   uint, 0400);
 120 module_param(programm_delay, uint, 0400);
 121 module_param(erase_delay,    uint, 0400);
 122 module_param(output_cycle,   uint, 0400);
 123 module_param(input_cycle,    uint, 0400);
 124 module_param(bus_width,      uint, 0400);
 125 module_param(do_delays,      uint, 0400);
 126 module_param(log,            uint, 0400);
 127 module_param(dbg,            uint, 0400);
 128 module_param_array(parts, ulong, &parts_num, 0400);
 129 module_param(badblocks,      charp, 0400);
 130 module_param(weakblocks,     charp, 0400);
 131 module_param(weakpages,      charp, 0400);
 132 module_param(bitflips,       uint, 0400);
 133 module_param(gravepages,     charp, 0400);
 134 module_param(overridesize,   uint, 0400);
 135 module_param(cache_file,     charp, 0400);
 136 module_param(bbt,            uint, 0400);
 137 module_param(bch,            uint, 0400);
 138
 139 MODULE_PARM_DESC(first_id_byte,  "The first byte returned by NAND Flash 'read ID' command (manufacturer ID)");
 140 MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID)");
 141 MODULE_PARM_DESC(third_id_byte,  "The third byte returned by NAND Flash 'read ID' command");
 142 MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read ID' command");
 143 MODULE_PARM_DESC(access_delay,   "Initial page access delay (microseconds)");
 144 MODULE_PARM_DESC(programm_delay, "Page programm delay (microseconds");
 145 MODULE_PARM_DESC(erase_delay,    "Sector erase delay (milliseconds)");
 146 MODULE_PARM_DESC(output_cycle,   "Word output (from flash) time (nanoseconds)");
 147 MODULE_PARM_DESC(input_cycle,    "Word input (to flash) time (nanoseconds)");
 148 MODULE_PARM_DESC(bus_width,      "Chip's bus width (8- or 16-bit)");
 149 MODULE_PARM_DESC(do_delays,      "Simulate NAND delays using busy-waits if not zero");
 150 MODULE_PARM_DESC(log,            "Perform logging if not zero");
 151 MODULE_PARM_DESC(dbg,            "Output debug information if not zero");
 152 MODULE_PARM_DESC(parts,          "Partition sizes (in erase blocks) separated by commas");
 153 /* Page and erase block positions for the following parameters are independent of any partitions */
 154 MODULE_PARM_DESC(badblocks,      "Erase blocks that are initially marked bad, separated by commas");
 155 MODULE_PARM_DESC(weakblocks,     "Weak erase blocks [: remaining erase cycles (defaults to 3)]"
 156                                  " separated by commas e.g. 113:2 means eb 113"
 157                                  " can be erased only twice before failing");
 158 MODULE_PARM_DESC(weakpages,      "Weak pages [: maximum writes (defaults to 3)]"
 159                                  " separated by commas e.g. 1401:2 means page 1401"
 160                                  " can be written only twice before failing");
 161 MODULE_PARM_DESC(bitflips,       "Maximum number of random bit flips per page (zero by default)");
 162 MODULE_PARM_DESC(gravepages,     "Pages that lose data [: maximum reads (defaults to 3)]"
 163                                  " separated by commas e.g. 1401:2 means page 1401"
 164                                  " can be read only twice before failing");
 165 MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the ID bytes. "
 166                                  "The size is specified in erase blocks and as the exponent of a power of two"
 167                                  " e.g. 5 means a size of 32 erase blocks");
 168 MODULE_PARM_DESC(cache_file,     "File to use to cache nand pages instead of memory");
 169 MODULE_PARM_DESC(bbt,            "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in data area");
 170 MODULE_PARM_DESC(bch,            "Enable BCH ecc and set how many bits should "
 171                                  "be correctable in 512-byte blocks");
 172
 173 /* The largest possible page size */
 174 #define NS_LARGEST_PAGE_SIZE    4096
 175
 176 /* The prefix for simulator output */
 177 #define NS_OUTPUT_PREFIX "[nandsim]"
 178
 179 /* Simulator's output macros (logging, debugging, warning, error) */
 180 #define NS_LOG(args...) \
 181         do { if (log) printk(KERN_DEBUG NS_OUTPUT_PREFIX " log: " args); } while(0)
 182 #define NS_DBG(args...) \
 183         do { if (dbg) printk(KERN_DEBUG NS_OUTPUT_PREFIX " debug: " args); } while(0)
 184 #define NS_WARN(args...) \
 185         do { printk(KERN_WARNING NS_OUTPUT_PREFIX " warning: " args); } while(0)
 186 #define NS_ERR(args...) \
 187         do { printk(KERN_ERR NS_OUTPUT_PREFIX " error: " args); } while(0)
 188 #define NS_INFO(args...) \
 189         do { printk(KERN_INFO NS_OUTPUT_PREFIX " " args); } while(0)
 190
 191 /* Busy-wait delay macros (microseconds, milliseconds) */
 192 #define NS_UDELAY(us) \
 193         do { if (do_delays) udelay(us); } while(0)
 194 #define NS_MDELAY(us) \
 195         do { if (do_delays) mdelay(us); } while(0)
 196
 197 /* Is the nandsim structure initialized ? */
 198 #define NS_IS_INITIALIZED(ns) ((ns)->geom.totsz != 0)
 199
 200 /* Good operation completion status */
 201 #define NS_STATUS_OK(ns) (NAND_STATUS_READY | (NAND_STATUS_WP * ((ns)->lines.wp == 0)))
 202
 203 /* Operation failed completion status */
 204 #define NS_STATUS_FAILED(ns) (NAND_STATUS_FAIL | NS_STATUS_OK(ns))
 205
 206 /* Calculate the page offset in flash RAM image by (row, column) address */
 207 #define NS_RAW_OFFSET(ns) \
 208         (((ns)->regs.row * (ns)->geom.pgszoob) + (ns)->regs.column)
 209
 210 /* Calculate the OOB offset in flash RAM image by (row, column) address */
 211 #define NS_RAW_OFFSET_OOB(ns) (NS_RAW_OFFSET(ns) + ns->geom.pgsz)
 212
 213 /* After a command is input, the simulator goes to one of the following states */
 214 #define STATE_CMD_READ0        0x00000001 /* read data from the beginning of page */
 215 #define STATE_CMD_READ1        0x00000002 /* read data from the second half of page */
 216 #define STATE_CMD_READSTART    0x00000003 /* read data second command (large page devices) */
 217 #define STATE_CMD_PAGEPROG     0x00000004 /* start page program */
 218 #define STATE_CMD_READOOB      0x00000005 /* read OOB area */
 219 #define STATE_CMD_ERASE1       0x00000006 /* sector erase first command */
 220 #define STATE_CMD_STATUS       0x00000007 /* read status */
 221 #define STATE_CMD_SEQIN        0x00000009 /* sequential data input */
 222 #define STATE_CMD_READID       0x0000000A /* read ID */
 223 #define STATE_CMD_ERASE2       0x0000000B /* sector erase second command */
 224 #define STATE_CMD_RESET        0x0000000C /* reset */
 225 #define STATE_CMD_RNDOUT       0x0000000D /* random output command */
 226 #define STATE_CMD_RNDOUTSTART  0x0000000E /* random output start command */
 227 #define STATE_CMD_MASK         0x0000000F /* command states mask */
 228
 229 /* After an address is input, the simulator goes to one of these states */
 230 #define STATE_ADDR_PAGE        0x00000010 /* full (row, column) address is accepted */
 231 #define STATE_ADDR_SEC         0x00000020 /* sector address was accepted */
 232 #define STATE_ADDR_COLUMN      0x00000030 /* column address was accepted */
 233 #define STATE_ADDR_ZERO        0x00000040 /* one byte zero address was accepted */
 234 #define STATE_ADDR_MASK        0x00000070 /* address states mask */
 235
 236 /* During data input/output the simulator is in these states */
 237 #define STATE_DATAIN           0x00000100 /* waiting for data input */
 238 #define STATE_DATAIN_MASK      0x00000100 /* data input states mask */
 239
 240 #define STATE_DATAOUT          0x00001000 /* waiting for page data output */
 241 #define STATE_DATAOUT_ID       0x00002000 /* waiting for ID bytes output */
 242 #define STATE_DATAOUT_STATUS   0x00003000 /* waiting for status output */
 243 #define STATE_DATAOUT_STATUS_M 0x00004000 /* waiting for multi-plane status output */
 244 #define STATE_DATAOUT_MASK     0x00007000 /* data output states mask */
 245
 246 /* Previous operation is done, ready to accept new requests */
 247 #define STATE_READY            0x00000000
 248
 249 /* This state is used to mark that the next state isn't known yet */
 250 #define STATE_UNKNOWN          0x10000000
 251
 252 /* Simulator's actions bit masks */
 253 #define ACTION_CPY       0x00100000 /* copy page/OOB to the internal buffer */
 254 #define ACTION_PRGPAGE   0x00200000 /* program the internal buffer to flash */
 255 #define ACTION_SECERASE  0x00300000 /* erase sector */
 256 #define ACTION_ZEROOFF   0x00400000 /* don't add any offset to address */
 257 #define ACTION_HALFOFF   0x00500000 /* add to address half of page */
 258 #define ACTION_OOBOFF    0x00600000 /* add to address OOB offset */
 259 #define ACTION_MASK      0x00700000 /* action mask */
 260
 261 #define NS_OPER_NUM      13 /* Number of operations supported by the simulator */
 262 #define NS_OPER_STATES   6  /* Maximum number of states in operation */
 263
 264 #define OPT_ANY          0xFFFFFFFF /* any chip supports this operation */
 265 #define OPT_PAGE512      0x00000002 /* 512-byte  page chips */
 266 #define OPT_PAGE2048     0x00000008 /* 2048-byte page chips */
 267 #define OPT_SMARTMEDIA   0x00000010 /* SmartMedia technology chips */
 268 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
 269 #define OPT_PAGE4096     0x00000080 /* 4096-byte page chips */
 270 #define OPT_LARGEPAGE    (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
 271 #define OPT_SMALLPAGE    (OPT_PAGE512) /* 512-byte page chips */
 272
 273 /* Remove action bits from state */
 274 #define NS_STATE(x) ((x) & ~ACTION_MASK)
 275
 276 /*
 277  * Maximum previous states which need to be saved. Currently saving is
 278  * only needed for page program operation with preceded read command
 279  * (which is only valid for 512-byte pages).
 280  */
 281 #define NS_MAX_PREVSTATES 1
 282
 283 /* Maximum page cache pages needed to read or write a NAND page to the cache_file */
 284 #define NS_MAX_HELD_PAGES 16
 285
 286 struct nandsim_debug_info {
 287         struct dentry *dfs_root;
 288         struct dentry *dfs_wear_report;
 289 };
 290
 291 /*
 292  * A union to represent flash memory contents and flash buffer.
 293  */
 294 union ns_mem {
 295         u_char *byte;    /* for byte access */
 296         uint16_t *word;  /* for 16-bit word access */
 297 };
 298
 299 /*
 300  * The structure which describes all the internal simulator data.
 301  */
 302 struct nandsim {
 303         struct mtd_partition partitions[CONFIG_NANDSIM_MAX_PARTS];
 304         unsigned int nbparts;
 305
 306         uint busw;              /* flash chip bus width (8 or 16) */
 307         u_char ids[4];          /* chip's ID bytes */
 308         uint32_t options;       /* chip's characteristic bits */
 309         uint32_t state;         /* current chip state */
 310         uint32_t nxstate;       /* next expected state */
 311
 312         uint32_t *op;           /* current operation, NULL operations isn't known yet  */
 313         uint32_t pstates[NS_MAX_PREVSTATES]; /* previous states */
 314         uint16_t npstates;      /* number of previous states saved */
 315         uint16_t stateidx;      /* current state index */
 316
 317         /* The simulated NAND flash pages array */
 318         union ns_mem *pages;
 319
 320         /* Slab allocator for nand pages */
 321         struct kmem_cache *nand_pages_slab;
 322
 323         /* Internal buffer of page + OOB size bytes */
 324         union ns_mem buf;
 325
 326         /* NAND flash "geometry" */
 327         struct {
 328                 uint64_t totsz;     /* total flash size, bytes */
 329                 uint32_t secsz;     /* flash sector (erase block) size, bytes */
 330                 uint pgsz;          /* NAND flash page size, bytes */
 331                 uint oobsz;         /* page OOB area size, bytes */
 332                 uint64_t totszoob;  /* total flash size including OOB, bytes */
 333                 uint pgszoob;       /* page size including OOB , bytes*/
 334                 uint secszoob;      /* sector size including OOB, bytes */
 335                 uint pgnum;         /* total number of pages */
 336                 uint pgsec;         /* number of pages per sector */
 337                 uint secshift;      /* bits number in sector size */
 338                 uint pgshift;       /* bits number in page size */
 339                 uint pgaddrbytes;   /* bytes per page address */
 340                 uint secaddrbytes;  /* bytes per sector address */
 341                 uint idbytes;       /* the number ID bytes that this chip outputs */
 342         } geom;
 343
 344         /* NAND flash internal registers */
 345         struct {
 346                 unsigned command; /* the command register */
 347                 u_char   status;  /* the status register */
 348                 uint     row;     /* the page number */
 349                 uint     column;  /* the offset within page */
 350                 uint     count;   /* internal counter */
 351                 uint     num;     /* number of bytes which must be processed */
 352                 uint     off;     /* fixed page offset */
 353         } regs;
 354
 355         /* NAND flash lines state */
 356         struct {
 357                 int ce;  /* chip Enable */
 358                 int cle; /* command Latch Enable */
 359                 int ale; /* address Latch Enable */
 360                 int wp;  /* write Protect */
 361         } lines;
 362
 363         /* Fields needed when using a cache file */
 364         struct file *cfile; /* Open file */
 365         unsigned long *pages_written; /* Which pages have been written */
 366         void *file_buf;
 367         struct page *held_pages[NS_MAX_HELD_PAGES];
 368         int held_cnt;
 369
 370         struct nandsim_debug_info dbg;
 371 };
 372
 373 /*
 374  * Operations array. To perform any operation the simulator must pass
 375  * through the correspondent states chain.
 376  */
 377 static struct nandsim_operations {
 378         uint32_t reqopts;  /* options which are required to perform the operation */
 379         uint32_t states[NS_OPER_STATES]; /* operation's states */
 380 } ops[NS_OPER_NUM] = {
 381         /* Read page + OOB from the beginning */
 382         {OPT_SMALLPAGE, {STATE_CMD_READ0 | ACTION_ZEROOFF, STATE_ADDR_PAGE | ACTION_CPY,
 383                         STATE_DATAOUT, STATE_READY}},
 384         /* Read page + OOB from the second half */
 385         {OPT_PAGE512_8BIT, {STATE_CMD_READ1 | ACTION_HALFOFF, STATE_ADDR_PAGE | ACTION_CPY,
 386                         STATE_DATAOUT, STATE_READY}},
 387         /* Read OOB */
 388         {OPT_SMALLPAGE, {STATE_CMD_READOOB | ACTION_OOBOFF, STATE_ADDR_PAGE | ACTION_CPY,
 389                         STATE_DATAOUT, STATE_READY}},
 390         /* Program page starting from the beginning */
 391         {OPT_ANY, {STATE_CMD_SEQIN, STATE_ADDR_PAGE, STATE_DATAIN,
 392                         STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
 393         /* Program page starting from the beginning */
 394         {OPT_SMALLPAGE, {STATE_CMD_READ0, STATE_CMD_SEQIN | ACTION_ZEROOFF, STATE_ADDR_PAGE,
 395                               STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
 396         /* Program page starting from the second half */
 397         {OPT_PAGE512, {STATE_CMD_READ1, STATE_CMD_SEQIN | ACTION_HALFOFF, STATE_ADDR_PAGE,
 398                               STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
 399         /* Program OOB */
 400         {OPT_SMALLPAGE, {STATE_CMD_READOOB, STATE_CMD_SEQIN | ACTION_OOBOFF, STATE_ADDR_PAGE,
 401                               STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
 402         /* Erase sector */
 403         {OPT_ANY, {STATE_CMD_ERASE1, STATE_ADDR_SEC, STATE_CMD_ERASE2 | ACTION_SECERASE, STATE_READY}},
 404         /* Read status */
 405         {OPT_ANY, {STATE_CMD_STATUS, STATE_DATAOUT_STATUS, STATE_READY}},
 406         /* Read ID */
 407         {OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}},
 408         /* Large page devices read page */
 409         {OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY,
 410                                STATE_DATAOUT, STATE_READY}},
 411         /* Large page devices random page read */
 412         {OPT_LARGEPAGE, {STATE_CMD_RNDOUT, STATE_ADDR_COLUMN, STATE_CMD_RNDOUTSTART | ACTION_CPY,
 413                                STATE_DATAOUT, STATE_READY}},
 414 };
 415
 416 struct weak_block {
 417         struct list_head list;
 418         unsigned int erase_block_no;
 419         unsigned int max_erases;
 420         unsigned int erases_done;
 421 };
 422
 423 static LIST_HEAD(weak_blocks);
 424
 425 struct weak_page {
 426         struct list_head list;
 427         unsigned int page_no;
 428         unsigned int max_writes;
 429         unsigned int writes_done;
 430 };
 431
 432 static LIST_HEAD(weak_pages);
 433
 434 struct grave_page {
 435         struct list_head list;
 436         unsigned int page_no;
 437         unsigned int max_reads;
 438         unsigned int reads_done;
 439 };
 440
 441 static LIST_HEAD(grave_pages);
 442
 443 static unsigned long *erase_block_wear = NULL;
 444 static unsigned int wear_eb_count = 0;
 445 static unsigned long total_wear = 0;
 446
 447 /* MTD structure for NAND controller */
 448 static struct mtd_info *nsmtd;
 449
 450 static int nandsim_debugfs_show(struct seq_file *m, void *private)
 451 {
 452         unsigned long wmin = -1, wmax = 0, avg;
 453         unsigned long deciles[10], decile_max[10], tot = 0;
 454         unsigned int i;
 455
 456         /* Calc wear stats */
 457         for (i = 0; i < wear_eb_count; ++i) {
 458                 unsigned long wear = erase_block_wear[i];
 459                 if (wear < wmin)
 460                         wmin = wear;
 461                 if (wear > wmax)
 462                         wmax = wear;
 463                 tot += wear;
 464         }
 465
 466         for (i = 0; i < 9; ++i) {
 467                 deciles[i] = 0;
 468                 decile_max[i] = (wmax * (i + 1) + 5) / 10;
 469         }
 470         deciles[9] = 0;
 471         decile_max[9] = wmax;
 472         for (i = 0; i < wear_eb_count; ++i) {
 473                 int d;
 474                 unsigned long wear = erase_block_wear[i];
 475                 for (d = 0; d < 10; ++d)
 476                         if (wear <= decile_max[d]) {
 477                                 deciles[d] += 1;
 478                                 break;
 479                         }
 480         }
 481         avg = tot / wear_eb_count;
 482
 483         /* Output wear report */
 484         seq_printf(m, "Total numbers of erases:  %lu\n", tot);
 485         seq_printf(m, "Number of erase blocks:   %u\n", wear_eb_count);
 486         seq_printf(m, "Average number of erases: %lu\n", avg);
 487         seq_printf(m, "Maximum number of erases: %lu\n", wmax);
 488         seq_printf(m, "Minimum number of erases: %lu\n", wmin);
 489         for (i = 0; i < 10; ++i) {
 490                 unsigned long from = (i ? decile_max[i - 1] + 1 : 0);
 491                 if (from > decile_max[i])
 492                         continue;
 493                 seq_printf(m, "Number of ebs with erase counts from %lu to %lu : %lu\n",
 494                         from,
 495                         decile_max[i],
 496                         deciles[i]);
 497         }
 498
 499         return 0;
 500 }
 501
 502 static int nandsim_debugfs_open(struct inode *inode, struct file *file)
 503 {
 504         return single_open(file, nandsim_debugfs_show, inode->i_private);
 505 }
 506
 507 static const struct file_operations dfs_fops = {
 508         .open           = nandsim_debugfs_open,
 509         .read           = seq_read,
 510         .llseek         = seq_lseek,
 511         .release        = single_release,
 512 };
 513
 514 /**
 515  * nandsim_debugfs_create - initialize debugfs
 516  * @dev: nandsim device description object
 517  *
 518  * This function creates all debugfs files for UBI device @ubi. Returns zero in
 519  * case of success and a negative error code in case of failure.
 520  */
 521 static int nandsim_debugfs_create(struct nandsim *dev)
 522 {
 523         struct nandsim_debug_info *dbg = &dev->dbg;
 524         struct dentry *dent;
 525         int err;
 526
 527         if (!IS_ENABLED(CONFIG_DEBUG_FS))
 528                 return 0;
 529
 530         dent = debugfs_create_dir("nandsim", NULL);
 531         if (IS_ERR_OR_NULL(dent)) {
 532                 int err = dent ? -ENODEV : PTR_ERR(dent);
 533
 534                 NS_ERR("cannot create \"nandsim\" debugfs directory, err %d\n",
 535                         err);
 536                 return err;
 537         }
 538         dbg->dfs_root = dent;
 539
 540         dent = debugfs_create_file("wear_report", S_IRUSR,
 541                                    dbg->dfs_root, dev, &dfs_fops);
 542         if (IS_ERR_OR_NULL(dent))
 543                 goto out_remove;
 544         dbg->dfs_wear_report = dent;
 545
 546         return 0;
 547
 548 out_remove:
 549         debugfs_remove_recursive(dbg->dfs_root);
 550         err = dent ? PTR_ERR(dent) : -ENODEV;
 551         return err;
 552 }
 553
 554 /**
 555  * nandsim_debugfs_remove - destroy all debugfs files
 556  */
 557 static void nandsim_debugfs_remove(struct nandsim *ns)
 558 {
 559         if (IS_ENABLED(CONFIG_DEBUG_FS))
 560                 debugfs_remove_recursive(ns->dbg.dfs_root);
 561 }
 562
 563 /*
 564  * Allocate array of page pointers, create slab allocation for an array
 565  * and initialize the array by NULL pointers.
 566  *
 567  * RETURNS: 0 if success, -ENOMEM if memory alloc fails.
 568  */
 569 static int alloc_device(struct nandsim *ns)
 570 {
 571         struct file *cfile;
 572         int i, err;
 573
 574         if (cache_file) {
 575                 cfile = filp_open(cache_file, O_CREAT | O_RDWR | O_LARGEFILE, 0600);
 576                 if (IS_ERR(cfile))
 577                         return PTR_ERR(cfile);
 578                 if (!cfile->f_op->read && !cfile->f_op->aio_read) {
 579                         NS_ERR("alloc_device: cache file not readable\n");
 580                         err = -EINVAL;
 581                         goto err_close;
 582                 }
 583                 if (!cfile->f_op->write && !cfile->f_op->aio_write) {
 584                         NS_ERR("alloc_device: cache file not writeable\n");
 585                         err = -EINVAL;
 586                         goto err_close;
 587                 }
 588                 ns->pages_written = vzalloc(BITS_TO_LONGS(ns->geom.pgnum) *
 589                                             sizeof(unsigned long));
 590                 if (!ns->pages_written) {
 591                         NS_ERR("alloc_device: unable to allocate pages written array\n");
 592                         err = -ENOMEM;
 593                         goto err_close;
 594                 }
 595                 ns->file_buf = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
 596                 if (!ns->file_buf) {
 597                         NS_ERR("alloc_device: unable to allocate file buf\n");
 598                         err = -ENOMEM;
 599                         goto err_free;
 600                 }
 601                 ns->cfile = cfile;
 602                 return 0;
 603         }
 604
 605         ns->pages = vmalloc(ns->geom.pgnum * sizeof(union ns_mem));
 606         if (!ns->pages) {
 607                 NS_ERR("alloc_device: unable to allocate page array\n");
 608                 return -ENOMEM;
 609         }
 610         for (i = 0; i < ns->geom.pgnum; i++) {
 611                 ns->pages[i].byte = NULL;
 612         }
 613         ns->nand_pages_slab = kmem_cache_create("nandsim",
 614                                                 ns->geom.pgszoob, 0, 0, NULL);
 615         if (!ns->nand_pages_slab) {
 616                 NS_ERR("cache_create: unable to create kmem_cache\n");
 617                 return -ENOMEM;
 618         }
 619
 620         return 0;
 621
 622 err_free:
 623         vfree(ns->pages_written);
 624 err_close:
 625         filp_close(cfile, NULL);
 626         return err;
 627 }
 628
 629 /*
 630  * Free any allocated pages, and free the array of page pointers.
 631  */
 632 static void free_device(struct nandsim *ns)
 633 {
 634         int i;
 635
 636         if (ns->cfile) {
 637                 kfree(ns->file_buf);
 638                 vfree(ns->pages_written);
 639                 filp_close(ns->cfile, NULL);
 640                 return;
 641         }
 642
 643         if (ns->pages) {
 644                 for (i = 0; i < ns->geom.pgnum; i++) {
 645                         if (ns->pages[i].byte)
 646                                 kmem_cache_free(ns->nand_pages_slab,
 647                                                 ns->pages[i].byte);
 648                 }
 649                 kmem_cache_destroy(ns->nand_pages_slab);
 650                 vfree(ns->pages);
 651         }
 652 }
 653
 654 static char *get_partition_name(int i)
 655 {
 656         return kasprintf(GFP_KERNEL, "NAND simulator partition %d", i);
 657 }
 658
 659 /*
 660  * Initialize the nandsim structure.
 661  *
 662  * RETURNS: 0 if success, -ERRNO if failure.
 663  */
 664 static int init_nandsim(struct mtd_info *mtd)
 665 {
 666         struct nand_chip *chip = mtd->priv;
 667         struct nandsim   *ns   = chip->priv;
 668         int i, ret = 0;
 669         uint64_t remains;
 670         uint64_t next_offset;
 671
 672         if (NS_IS_INITIALIZED(ns)) {
 673                 NS_ERR("init_nandsim: nandsim is already initialized\n");
 674                 return -EIO;
 675         }
 676
 677         /* Force mtd to not do delays */
 678         chip->chip_delay = 0;
 679
 680         /* Initialize the NAND flash parameters */
 681         ns->busw = chip->options & NAND_BUSWIDTH_16 ? 16 : 8;
 682         ns->geom.totsz    = mtd->size;
 683         ns->geom.pgsz     = mtd->writesize;
 684         ns->geom.oobsz    = mtd->oobsize;
 685         ns->geom.secsz    = mtd->erasesize;
 686         ns->geom.pgszoob  = ns->geom.pgsz + ns->geom.oobsz;
 687         ns->geom.pgnum    = div_u64(ns->geom.totsz, ns->geom.pgsz);
 688         ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
 689         ns->geom.secshift = ffs(ns->geom.secsz) - 1;
 690         ns->geom.pgshift  = chip->page_shift;
 691         ns->geom.pgsec    = ns->geom.secsz / ns->geom.pgsz;
 692         ns->geom.secszoob = ns->geom.secsz + ns->geom.oobsz * ns->geom.pgsec;
 693         ns->options = 0;
 694
 695         if (ns->geom.pgsz == 512) {
 696                 ns->options |= OPT_PAGE512;
 697                 if (ns->busw == 8)
 698                         ns->options |= OPT_PAGE512_8BIT;
 699         } else if (ns->geom.pgsz == 2048) {
 700                 ns->options |= OPT_PAGE2048;
 701         } else if (ns->geom.pgsz == 4096) {
 702                 ns->options |= OPT_PAGE4096;
 703         } else {
 704                 NS_ERR("init_nandsim: unknown page size %u\n", ns->geom.pgsz);
 705                 return -EIO;
 706         }
 707
 708         if (ns->options & OPT_SMALLPAGE) {
 709                 if (ns->geom.totsz <= (32 << 20)) {
 710                         ns->geom.pgaddrbytes  = 3;
 711                         ns->geom.secaddrbytes = 2;
 712                 } else {
 713                         ns->geom.pgaddrbytes  = 4;
 714                         ns->geom.secaddrbytes = 3;
 715                 }
 716         } else {
 717                 if (ns->geom.totsz <= (128 << 20)) {
 718                         ns->geom.pgaddrbytes  = 4;
 719                         ns->geom.secaddrbytes = 2;
 720                 } else {
 721                         ns->geom.pgaddrbytes  = 5;
 722                         ns->geom.secaddrbytes = 3;
 723                 }
 724         }
 725
 726         /* Fill the partition_info structure */
 727         if (parts_num > ARRAY_SIZE(ns->partitions)) {
 728                 NS_ERR("too many partitions.\n");
 729                 ret = -EINVAL;
 730                 goto error;
 731         }
 732         remains = ns->geom.totsz;
 733         next_offset = 0;
 734         for (i = 0; i < parts_num; ++i) {
 735                 uint64_t part_sz = (uint64_t)parts[i] * ns->geom.secsz;
 736
 737                 if (!part_sz || part_sz > remains) {
 738                         NS_ERR("bad partition size.\n");
 739                         ret = -EINVAL;
 740                         goto error;
 741                 }
 742                 ns->partitions[i].name   = get_partition_name(i);
 743                 ns->partitions[i].offset = next_offset;
 744                 ns->partitions[i].size   = part_sz;
 745                 next_offset += ns->partitions[i].size;
 746                 remains -= ns->partitions[i].size;
 747         }
 748         ns->nbparts = parts_num;
 749         if (remains) {
 750                 if (parts_num + 1 > ARRAY_SIZE(ns->partitions)) {
 751                         NS_ERR("too many partitions.\n");
 752                         ret = -EINVAL;
 753                         goto error;
 754                 }
 755                 ns->partitions[i].name   = get_partition_name(i);
 756                 ns->partitions[i].offset = next_offset;
 757                 ns->partitions[i].size   = remains;
 758                 ns->nbparts += 1;
 759         }
 760
 761         if (ns->busw == 16)
 762                 NS_WARN("16-bit flashes support wasn't tested\n");
 763
 764         printk("flash size: %llu MiB\n",
 765                         (unsigned long long)ns->geom.totsz >> 20);
 766         printk("page size: %u bytes\n",         ns->geom.pgsz);
 767         printk("OOB area size: %u bytes\n",     ns->geom.oobsz);
 768         printk("sector size: %u KiB\n",         ns->geom.secsz >> 10);
 769         printk("pages number: %u\n",            ns->geom.pgnum);
 770         printk("pages per sector: %u\n",        ns->geom.pgsec);
 771         printk("bus width: %u\n",               ns->busw);
 772         printk("bits in sector size: %u\n",     ns->geom.secshift);
 773         printk("bits in page size: %u\n",       ns->geom.pgshift);
 774         printk("bits in OOB size: %u\n",        ffs(ns->geom.oobsz) - 1);
 775         printk("flash size with OOB: %llu KiB\n",
 776                         (unsigned long long)ns->geom.totszoob >> 10);
 777         printk("page address bytes: %u\n",      ns->geom.pgaddrbytes);
 778         printk("sector address bytes: %u\n",    ns->geom.secaddrbytes);
 779         printk("options: %#x\n",                ns->options);
 780
 781         if ((ret = alloc_device(ns)) != 0)
 782                 goto error;
 783
 784         /* Allocate / initialize the internal buffer */
 785         ns->buf.byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
 786         if (!ns->buf.byte) {
 787                 NS_ERR("init_nandsim: unable to allocate %u bytes for the internal buffer\n",
 788                         ns->geom.pgszoob);
 789                 ret = -ENOMEM;
 790                 goto error;
 791         }
 792         memset(ns->buf.byte, 0xFF, ns->geom.pgszoob);
 793
 794         return 0;
 795
 796 error:
 797         free_device(ns);
 798
 799         return ret;
 800 }
 801
 802 /*
 803  * Free the nandsim structure.
 804  */
 805 static void free_nandsim(struct nandsim *ns)
 806 {
 807         kfree(ns->buf.byte);
 808         free_device(ns);
 809
 810         return;
 811 }
 812
 813 static int parse_badblocks(struct nandsim *ns, struct mtd_info *mtd)
 814 {
 815         char *w;
 816         int zero_ok;
 817         unsigned int erase_block_no;
 818         loff_t offset;
 819
 820         if (!badblocks)
 821                 return 0;
 822         w = badblocks;
 823         do {
 824                 zero_ok = (*w == '0' ? 1 : 0);
 825                 erase_block_no = simple_strtoul(w, &w, 0);
 826                 if (!zero_ok && !erase_block_no) {
 827                         NS_ERR("invalid badblocks.\n");
 828                         return -EINVAL;
 829                 }
 830                 offset = erase_block_no * ns->geom.secsz;
 831                 if (mtd_block_markbad(mtd, offset)) {
 832                         NS_ERR("invalid badblocks.\n");
 833                         return -EINVAL;
 834                 }
 835                 if (*w == ',')
 836                         w += 1;
 837         } while (*w);
 838         return 0;
 839 }
 840
 841 static int parse_weakblocks(void)
 842 {
 843         char *w;
 844         int zero_ok;
 845         unsigned int erase_block_no;
 846         unsigned int max_erases;
 847         struct weak_block *wb;
 848
 849         if (!weakblocks)
 850                 return 0;
 851         w = weakblocks;
 852         do {
 853                 zero_ok = (*w == '0' ? 1 : 0);
 854                 erase_block_no = simple_strtoul(w, &w, 0);
 855                 if (!zero_ok && !erase_block_no) {
 856                         NS_ERR("invalid weakblocks.\n");
 857                         return -EINVAL;
 858                 }
 859                 max_erases = 3;
 860                 if (*w == ':') {
 861                         w += 1;
 862                         max_erases = simple_strtoul(w, &w, 0);
 863                 }
 864                 if (*w == ',')
 865                         w += 1;
 866                 wb = kzalloc(sizeof(*wb), GFP_KERNEL);
 867                 if (!wb) {
 868                         NS_ERR("unable to allocate memory.\n");
 869                         return -ENOMEM;
 870                 }
 871                 wb->erase_block_no = erase_block_no;
 872                 wb->max_erases = max_erases;
 873                 list_add(&wb->list, &weak_blocks);
 874         } while (*w);
 875         return 0;
 876 }
 877
 878 static int erase_error(unsigned int erase_block_no)
 879 {
 880         struct weak_block *wb;
 881
 882         list_for_each_entry(wb, &weak_blocks, list)
 883                 if (wb->erase_block_no == erase_block_no) {
 884                         if (wb->erases_done >= wb->max_erases)
 885                                 return 1;
 886                         wb->erases_done += 1;
 887                         return 0;
 888                 }
 889         return 0;
 890 }
 891
 892 static int parse_weakpages(void)
 893 {
 894         char *w;
 895         int zero_ok;
 896         unsigned int page_no;
 897         unsigned int max_writes;
 898         struct weak_page *wp;
 899
 900         if (!weakpages)
 901                 return 0;
 902         w = weakpages;
 903         do {
 904                 zero_ok = (*w == '0' ? 1 : 0);
 905                 page_no = simple_strtoul(w, &w, 0);
 906                 if (!zero_ok && !page_no) {
 907                         NS_ERR("invalid weakpagess.\n");
 908                         return -EINVAL;
 909                 }
 910                 max_writes = 3;
 911                 if (*w == ':') {
 912                         w += 1;
 913                         max_writes = simple_strtoul(w, &w, 0);
 914                 }
 915                 if (*w == ',')
 916                         w += 1;
 917                 wp = kzalloc(sizeof(*wp), GFP_KERNEL);
 918                 if (!wp) {
 919                         NS_ERR("unable to allocate memory.\n");
 920                         return -ENOMEM;
 921                 }
 922                 wp->page_no = page_no;
 923                 wp->max_writes = max_writes;
 924                 list_add(&wp->list, &weak_pages);
 925         } while (*w);
 926         return 0;
 927 }
 928
 929 static int write_error(unsigned int page_no)
 930 {
 931         struct weak_page *wp;
 932
 933         list_for_each_entry(wp, &weak_pages, list)
 934                 if (wp->page_no == page_no) {
 935                         if (wp->writes_done >= wp->max_writes)
 936                                 return 1;
 937                         wp->writes_done += 1;
 938                         return 0;
 939                 }
 940         return 0;
 941 }
 942
 943 static int parse_gravepages(void)
 944 {
 945         char *g;
 946         int zero_ok;
 947         unsigned int page_no;
 948         unsigned int max_reads;
 949         struct grave_page *gp;
 950
 951         if (!gravepages)
 952                 return 0;
 953         g = gravepages;
 954         do {
 955                 zero_ok = (*g == '0' ? 1 : 0);
 956                 page_no = simple_strtoul(g, &g, 0);
 957                 if (!zero_ok && !page_no) {
 958                         NS_ERR("invalid gravepagess.\n");
 959                         return -EINVAL;
 960                 }
 961                 max_reads = 3;
 962                 if (*g == ':') {
 963                         g += 1;
 964                         max_reads = simple_strtoul(g, &g, 0);
 965                 }
 966                 if (*g == ',')
 967                         g += 1;
 968                 gp = kzalloc(sizeof(*gp), GFP_KERNEL);
 969                 if (!gp) {
 970                         NS_ERR("unable to allocate memory.\n");
 971                         return -ENOMEM;
 972                 }
 973                 gp->page_no = page_no;
 974                 gp->max_reads = max_reads;
 975                 list_add(&gp->list, &grave_pages);
 976         } while (*g);
 977         return 0;
 978 }
 979
 980 static int read_error(unsigned int page_no)
 981 {
 982         struct grave_page *gp;
 983
 984         list_for_each_entry(gp, &grave_pages, list)
 985                 if (gp->page_no == page_no) {
 986                         if (gp->reads_done >= gp->max_reads)
 987                                 return 1;
 988                         gp->reads_done += 1;
 989                         return 0;
 990                 }
 991         return 0;
 992 }
 993
 994 static void free_lists(void)
 995 {
 996         struct list_head *pos, *n;
 997         list_for_each_safe(pos, n, &weak_blocks) {
 998                 list_del(pos);
 999                 kfree(list_entry(pos, struct weak_block, list));
1000         }
1001         list_for_each_safe(pos, n, &weak_pages) {
1002                 list_del(pos);
1003                 kfree(list_entry(pos, struct weak_page, list));
1004         }
1005         list_for_each_safe(pos, n, &grave_pages) {
1006                 list_del(pos);
1007                 kfree(list_entry(pos, struct grave_page, list));
1008         }
1009         kfree(erase_block_wear);
1010 }
1011
1012 static int setup_wear_reporting(struct mtd_info *mtd)
1013 {
1014         size_t mem;
1015
1016         wear_eb_count = div_u64(mtd->size, mtd->erasesize);
1017         mem = wear_eb_count * sizeof(unsigned long);
1018         if (mem / sizeof(unsigned long) != wear_eb_count) {
1019                 NS_ERR("Too many erase blocks for wear reporting\n");
1020                 return -ENOMEM;
1021         }
1022         erase_block_wear = kzalloc(mem, GFP_KERNEL);
1023         if (!erase_block_wear) {
1024                 NS_ERR("Too many erase blocks for wear reporting\n");
1025                 return -ENOMEM;
1026         }
1027         return 0;
1028 }
1029
1030 static void update_wear(unsigned int erase_block_no)
1031 {
1032         if (!erase_block_wear)
1033                 return;
1034         total_wear += 1;
1035         /*
1036          * TODO: Notify this through a debugfs entry,
1037          * instead of showing an error message.
1038          */
1039         if (total_wear == 0)
1040                 NS_ERR("Erase counter total overflow\n");
1041         erase_block_wear[erase_block_no] += 1;
1042         if (erase_block_wear[erase_block_no] == 0)
1043                 NS_ERR("Erase counter overflow for erase block %u\n", erase_block_no);
1044 }
1045
1046 /*
1047  * Returns the string representation of 'state' state.
1048  */
1049 static char *get_state_name(uint32_t state)
1050 {
1051         switch (NS_STATE(state)) {
1052                 case STATE_CMD_READ0:
1053                         return "STATE_CMD_READ0";
1054                 case STATE_CMD_READ1:
1055                         return "STATE_CMD_READ1";
1056                 case STATE_CMD_PAGEPROG:
1057                         return "STATE_CMD_PAGEPROG";
1058                 case STATE_CMD_READOOB:
1059                         return "STATE_CMD_READOOB";
1060                 case STATE_CMD_READSTART:
1061                         return "STATE_CMD_READSTART";
1062                 case STATE_CMD_ERASE1:
1063                         return "STATE_CMD_ERASE1";
1064                 case STATE_CMD_STATUS:
1065                         return "STATE_CMD_STATUS";
1066                 case STATE_CMD_SEQIN:
1067                         return "STATE_CMD_SEQIN";
1068                 case STATE_CMD_READID:
1069                         return "STATE_CMD_READID";
1070                 case STATE_CMD_ERASE2:
1071                         return "STATE_CMD_ERASE2";
1072                 case STATE_CMD_RESET:
1073                         return "STATE_CMD_RESET";
1074                 case STATE_CMD_RNDOUT:
1075                         return "STATE_CMD_RNDOUT";
1076                 case STATE_CMD_RNDOUTSTART:
1077                         return "STATE_CMD_RNDOUTSTART";
1078                 case STATE_ADDR_PAGE:
1079                         return "STATE_ADDR_PAGE";
1080                 case STATE_ADDR_SEC:
1081                         return "STATE_ADDR_SEC";
1082                 case STATE_ADDR_ZERO:
1083                         return "STATE_ADDR_ZERO";
1084                 case STATE_ADDR_COLUMN:
1085                         return "STATE_ADDR_COLUMN";
1086                 case STATE_DATAIN:
1087                         return "STATE_DATAIN";
1088                 case STATE_DATAOUT:
1089                         return "STATE_DATAOUT";
1090                 case STATE_DATAOUT_ID:
1091                         return "STATE_DATAOUT_ID";
1092                 case STATE_DATAOUT_STATUS:
1093                         return "STATE_DATAOUT_STATUS";
1094                 case STATE_DATAOUT_STATUS_M:
1095                         return "STATE_DATAOUT_STATUS_M";
1096                 case STATE_READY:
1097                         return "STATE_READY";
1098                 case STATE_UNKNOWN:
1099                         return "STATE_UNKNOWN";
1100         }
1101
1102         NS_ERR("get_state_name: unknown state, BUG\n");
1103         return NULL;
1104 }
1105
1106 /*
1107  * Check if command is valid.
1108  *
1109  * RETURNS: 1 if wrong command, 0 if right.
1110  */
1111 static int check_command(int cmd)
1112 {
1113         switch (cmd) {
1114
1115         case NAND_CMD_READ0:
1116         case NAND_CMD_READ1:
1117         case NAND_CMD_READSTART:
1118         case NAND_CMD_PAGEPROG:
1119         case NAND_CMD_READOOB:
1120         case NAND_CMD_ERASE1:
1121         case NAND_CMD_STATUS:
1122         case NAND_CMD_SEQIN:
1123         case NAND_CMD_READID:
1124         case NAND_CMD_ERASE2:
1125         case NAND_CMD_RESET:
1126         case NAND_CMD_RNDOUT:
1127         case NAND_CMD_RNDOUTSTART:
1128                 return 0;
1129
1130         default:
1131                 return 1;
1132         }
1133 }
1134
1135 /*
1136  * Returns state after command is accepted by command number.
1137  */
1138 static uint32_t get_state_by_command(unsigned command)
1139 {
1140         switch (command) {
1141                 case NAND_CMD_READ0:
1142                         return STATE_CMD_READ0;
1143                 case NAND_CMD_READ1:
1144                         return STATE_CMD_READ1;
1145                 case NAND_CMD_PAGEPROG:
1146                         return STATE_CMD_PAGEPROG;
1147                 case NAND_CMD_READSTART:
1148                         return STATE_CMD_READSTART;
1149                 case NAND_CMD_READOOB:
1150                         return STATE_CMD_READOOB;
1151                 case NAND_CMD_ERASE1:
1152                         return STATE_CMD_ERASE1;
1153                 case NAND_CMD_STATUS:
1154                         return STATE_CMD_STATUS;
1155                 case NAND_CMD_SEQIN:
1156                         return STATE_CMD_SEQIN;
1157                 case NAND_CMD_READID:
1158                         return STATE_CMD_READID;
1159                 case NAND_CMD_ERASE2:
1160                         return STATE_CMD_ERASE2;
1161                 case NAND_CMD_RESET:
1162                         return STATE_CMD_RESET;
1163                 case NAND_CMD_RNDOUT:
1164                         return STATE_CMD_RNDOUT;
1165                 case NAND_CMD_RNDOUTSTART:
1166                         return STATE_CMD_RNDOUTSTART;
1167         }
1168
1169         NS_ERR("get_state_by_command: unknown command, BUG\n");
1170         return 0;
1171 }
1172
1173 /*
1174  * Move an address byte to the correspondent internal register.
1175  */
1176 static inline void accept_addr_byte(struct nandsim *ns, u_char bt)
1177 {
1178         uint byte = (uint)bt;
1179
1180         if (ns->regs.count < (ns->geom.pgaddrbytes - ns->geom.secaddrbytes))
1181                 ns->regs.column |= (byte << 8 * ns->regs.count);
1182         else {
1183                 ns->regs.row |= (byte << 8 * (ns->regs.count -
1184                                                 ns->geom.pgaddrbytes +
1185                                                 ns->geom.secaddrbytes));
1186         }
1187
1188         return;
1189 }
1190
1191 /*
1192  * Switch to STATE_READY state.
1193  */
1194 static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
1195 {
1196         NS_DBG("switch_to_ready_state: switch to %s state\n", get_state_name(STATE_READY));
1197
1198         ns->state       = STATE_READY;
1199         ns->nxstate     = STATE_UNKNOWN;
1200         ns->op          = NULL;
1201         ns->npstates    = 0;
1202         ns->stateidx    = 0;
1203         ns->regs.num    = 0;
1204         ns->regs.count  = 0;
1205         ns->regs.off    = 0;
1206         ns->regs.row    = 0;
1207         ns->regs.column = 0;
1208         ns->regs.status = status;
1209 }
1210
1211 /*
1212  * If the operation isn't known yet, try to find it in the global array
1213  * of supported operations.
1214  *
1215  * Operation can be unknown because of the following.
1216  *   1. New command was accepted and this is the first call to find the
1217  *      correspondent states chain. In this case ns->npstates = 0;
1218  *   2. There are several operations which begin with the same command(s)
1219  *      (for example program from the second half and read from the
1220  *      second half operations both begin with the READ1 command). In this
1221  *      case the ns->pstates[] array contains previous states.
1222  *
1223  * Thus, the function tries to find operation containing the following
1224  * states (if the 'flag' parameter is 0):
1225  *    ns->pstates[0], ... ns->pstates[ns->npstates], ns->state
1226  *
1227  * If (one and only one) matching operation is found, it is accepted (
1228  * ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is
1229  * zeroed).
1230  *
1231  * If there are several matches, the current state is pushed to the
1232  * ns->pstates.
1233  *
1234  * The operation can be unknown only while commands are input to the chip.
1235  * As soon as address command is accepted, the operation must be known.
1236  * In such situation the function is called with 'flag' != 0, and the
1237  * operation is searched using the following pattern:
1238  *     ns->pstates[0], ... ns->pstates[ns->npstates], <address input>
1239  *
1240  * It is supposed that this pattern must either match one operation or
1241  * none. There can't be ambiguity in that case.
1242  *
1243  * If no matches found, the function does the following:
1244  *   1. if there are saved states present, try to ignore them and search
1245  *      again only using the last command. If nothing was found, switch
1246  *      to the STATE_READY state.
1247  *   2. if there are no saved states, switch to the STATE_READY state.
1248  *
1249  * RETURNS: -2 - no matched operations found.
1250  *          -1 - several matches.
1251  *           0 - operation is found.
1252  */
1253 static int find_operation(struct nandsim *ns, uint32_t flag)
1254 {
1255         int opsfound = 0;
1256         int i, j, idx = 0;
1257
1258         for (i = 0; i < NS_OPER_NUM; i++) {
1259
1260                 int found = 1;
1261
1262                 if (!(ns->options & ops[i].reqopts))
1263                         /* Ignore operations we can't perform */
1264                         continue;
1265
1266                 if (flag) {
1267                         if (!(ops[i].states[ns->npstates] & STATE_ADDR_MASK))
1268                                 continue;
1269                 } else {
1270                         if (NS_STATE(ns->state) != NS_STATE(ops[i].states[ns->npstates]))
1271                                 continue;
1272                 }
1273
1274                 for (j = 0; j < ns->npstates; j++)
1275                         if (NS_STATE(ops[i].states[j]) != NS_STATE(ns->pstates[j])
1276                                 && (ns->options & ops[idx].reqopts)) {
1277                                 found = 0;
1278                                 break;
1279                         }
1280
1281                 if (found) {
1282                         idx = i;
1283                         opsfound += 1;
1284                 }
1285         }
1286
1287         if (opsfound == 1) {
1288                 /* Exact match */
1289                 ns->op = &ops[idx].states[0];
1290                 if (flag) {
1291                         /*
1292                          * In this case the find_operation function was
1293                          * called when address has just began input. But it isn't
1294                          * yet fully input and the current state must
1295                          * not be one of STATE_ADDR_*, but the STATE_ADDR_*
1296                          * state must be the next state (ns->nxstate).
1297                          */
1298                         ns->stateidx = ns->npstates - 1;
1299                 } else {
1300                         ns->stateidx = ns->npstates;
1301                 }
1302                 ns->npstates = 0;
1303                 ns->state = ns->op[ns->stateidx];
1304                 ns->nxstate = ns->op[ns->stateidx + 1];
1305                 NS_DBG("find_operation: operation found, index: %d, state: %s, nxstate %s\n",
1306                                 idx, get_state_name(ns->state), get_state_name(ns->nxstate));
1307                 return 0;
1308         }
1309
1310         if (opsfound == 0) {
1311                 /* Nothing was found. Try to ignore previous commands (if any) and search again */
1312                 if (ns->npstates != 0) {
1313                         NS_DBG("find_operation: no operation found, try again with state %s\n",
1314                                         get_state_name(ns->state));
1315                         ns->npstates = 0;
1316                         return find_operation(ns, 0);
1317
1318                 }
1319                 NS_DBG("find_operation: no operations found\n");
1320                 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
1321                 return -2;
1322         }
1323
1324         if (flag) {
1325                 /* This shouldn't happen */
1326                 NS_DBG("find_operation: BUG, operation must be known if address is input\n");
1327                 return -2;
1328         }
1329
1330         NS_DBG("find_operation: there is still ambiguity\n");
1331
1332         ns->pstates[ns->npstates++] = ns->state;
1333
1334         return -1;
1335 }
1336
1337 static void put_pages(struct nandsim *ns)
1338 {
1339         int i;
1340
1341         for (i = 0; i < ns->held_cnt; i++)
1342                 page_cache_release(ns->held_pages[i]);
1343 }
1344
1345 /* Get page cache pages in advance to provide NOFS memory allocation */
1346 static int get_pages(struct nandsim *ns, struct file *file, size_t count, loff_t pos)
1347 {
1348         pgoff_t index, start_index, end_index;
1349         struct page *page;
1350         struct address_space *mapping = file->f_mapping;
1351
1352         start_index = pos >> PAGE_CACHE_SHIFT;
1353         end_index = (pos + count - 1) >> PAGE_CACHE_SHIFT;
1354         if (end_index - start_index + 1 > NS_MAX_HELD_PAGES)
1355                 return -EINVAL;
1356         ns->held_cnt = 0;
1357         for (index = start_index; index <= end_index; index++) {
1358                 page = find_get_page(mapping, index);
1359                 if (page == NULL) {
1360                         page = find_or_create_page(mapping, index, GFP_NOFS);
1361                         if (page == NULL) {
1362                                 write_inode_now(mapping->host, 1);
1363                                 page = find_or_create_page(mapping, index, GFP_NOFS);
1364                         }
1365                         if (page == NULL) {
1366                                 put_pages(ns);
1367                                 return -ENOMEM;
1368                         }
1369                         unlock_page(page);
1370                 }
1371                 ns->held_pages[ns->held_cnt++] = page;
1372         }
1373         return 0;
1374 }
1375
1376 static int set_memalloc(void)
1377 {
1378         if (current->flags & PF_MEMALLOC)
1379                 return 0;
1380         current->flags |= PF_MEMALLOC;
1381         return 1;
1382 }
1383
1384 static void clear_memalloc(int memalloc)
1385 {
1386         if (memalloc)
1387                 current->flags &= ~PF_MEMALLOC;
1388 }
1389
1390 static ssize_t read_file(struct nandsim *ns, struct file *file, void *buf, size_t count, loff_t pos)
1391 {
1392         ssize_t tx;
1393         int err, memalloc;
1394
1395         err = get_pages(ns, file, count, pos);
1396         if (err)
1397                 return err;
1398         memalloc = set_memalloc();
1399         tx = kernel_read(file, pos, buf, count);
1400         clear_memalloc(memalloc);
1401         put_pages(ns);
1402         return tx;
1403 }
1404
1405 static ssize_t write_file(struct nandsim *ns, struct file *file, void *buf, size_t count, loff_t pos)
1406 {
1407         ssize_t tx;
1408         int err, memalloc;
1409
1410         err = get_pages(ns, file, count, pos);
1411         if (err)
1412                 return err;
1413         memalloc = set_memalloc();
1414         tx = kernel_write(file, buf, count, pos);
1415         clear_memalloc(memalloc);
1416         put_pages(ns);
1417         return tx;
1418 }
1419
1420 /*
1421  * Returns a pointer to the current page.
1422  */
1423 static inline union ns_mem *NS_GET_PAGE(struct nandsim *ns)
1424 {
1425         return &(ns->pages[ns->regs.row]);
1426 }
1427
1428 /*
1429  * Retuns a pointer to the current byte, within the current page.
1430  */
1431 static inline u_char *NS_PAGE_BYTE_OFF(struct nandsim *ns)
1432 {
1433         return NS_GET_PAGE(ns)->byte + ns->regs.column + ns->regs.off;
1434 }
1435
1436 static int do_read_error(struct nandsim *ns, int num)
1437 {
1438         unsigned int page_no = ns->regs.row;
1439
1440         if (read_error(page_no)) {
1441                 prandom_bytes(ns->buf.byte, num);
1442                 NS_WARN("simulating read error in page %u\n", page_no);
1443                 return 1;
1444         }
1445         return 0;
1446 }
1447
1448 static void do_bit_flips(struct nandsim *ns, int num)
1449 {
1450         if (bitflips && prandom_u32() < (1 << 22)) {
1451                 int flips = 1;
1452                 if (bitflips > 1)
1453                         flips = (prandom_u32() % (int) bitflips) + 1;
1454                 while (flips--) {
1455                         int pos = prandom_u32() % (num * 8);
1456                         ns->buf.byte[pos / 8] ^= (1 << (pos % 8));
1457                         NS_WARN("read_page: flipping bit %d in page %d "
1458                                 "reading from %d ecc: corrected=%u failed=%u\n",
1459                                 pos, ns->regs.row, ns->regs.column + ns->regs.off,
1460                                 nsmtd->ecc_stats.corrected, nsmtd->ecc_stats.failed);
1461                 }
1462         }
1463 }
1464
1465 /*
1466  * Fill the NAND buffer with data read from the specified page.
1467  */
1468 static void read_page(struct nandsim *ns, int num)
1469 {
1470         union ns_mem *mypage;
1471
1472         if (ns->cfile) {
1473                 if (!test_bit(ns->regs.row, ns->pages_written)) {
1474                         NS_DBG("read_page: page %d not written\n", ns->regs.row);
1475                         memset(ns->buf.byte, 0xFF, num);
1476                 } else {
1477                         loff_t pos;
1478                         ssize_t tx;
1479
1480                         NS_DBG("read_page: page %d written, reading from %d\n",
1481                                 ns->regs.row, ns->regs.column + ns->regs.off);
1482                         if (do_read_error(ns, num))
1483                                 return;
1484                         pos = (loff_t)NS_RAW_OFFSET(ns) + ns->regs.off;
1485                         tx = read_file(ns, ns->cfile, ns->buf.byte, num, pos);
1486                         if (tx != num) {
1487                                 NS_ERR("read_page: read error for page %d ret %ld\n", ns->regs.row, (long)tx);
1488                                 return;
1489                         }
1490                         do_bit_flips(ns, num);
1491                 }
1492                 return;
1493         }
1494
1495         mypage = NS_GET_PAGE(ns);
1496         if (mypage->byte == NULL) {
1497                 NS_DBG("read_page: page %d not allocated\n", ns->regs.row);
1498                 memset(ns->buf.byte, 0xFF, num);
1499         } else {
1500                 NS_DBG("read_page: page %d allocated, reading from %d\n",
1501                         ns->regs.row, ns->regs.column + ns->regs.off);
1502                 if (do_read_error(ns, num))
1503                         return;
1504                 memcpy(ns->buf.byte, NS_PAGE_BYTE_OFF(ns), num);
1505                 do_bit_flips(ns, num);
1506         }
1507 }
1508
1509 /*
1510  * Erase all pages in the specified sector.
1511  */
1512 static void erase_sector(struct nandsim *ns)
1513 {
1514         union ns_mem *mypage;
1515         int i;
1516
1517         if (ns->cfile) {
1518                 for (i = 0; i < ns->geom.pgsec; i++)
1519                         if (__test_and_clear_bit(ns->regs.row + i,
1520                                                  ns->pages_written)) {
1521                                 NS_DBG("erase_sector: freeing page %d\n", ns->regs.row + i);
1522                         }
1523                 return;
1524         }
1525
1526         mypage = NS_GET_PAGE(ns);
1527         for (i = 0; i < ns->geom.pgsec; i++) {
1528                 if (mypage->byte != NULL) {
1529                         NS_DBG("erase_sector: freeing page %d\n", ns->regs.row+i);
1530                         kmem_cache_free(ns->nand_pages_slab, mypage->byte);
1531                         mypage->byte = NULL;
1532                 }
1533                 mypage++;
1534         }
1535 }
1536
1537 /*
1538  * Program the specified page with the contents from the NAND buffer.
1539  */
1540 static int prog_page(struct nandsim *ns, int num)
1541 {
1542         int i;
1543         union ns_mem *mypage;
1544         u_char *pg_off;
1545
1546         if (ns->cfile) {
1547                 loff_t off;
1548                 ssize_t tx;
1549                 int all;
1550
1551                 NS_DBG("prog_page: writing page %d\n", ns->regs.row);
1552                 pg_off = ns->file_buf + ns->regs.column + ns->regs.off;
1553                 off = (loff_t)NS_RAW_OFFSET(ns) + ns->regs.off;
1554                 if (!test_bit(ns->regs.row, ns->pages_written)) {
1555                         all = 1;
1556                         memset(ns->file_buf, 0xff, ns->geom.pgszoob);
1557                 } else {
1558                         all = 0;
1559                         tx = read_file(ns, ns->cfile, pg_off, num, off);
1560                         if (tx != num) {
1561                                 NS_ERR("prog_page: read error for page %d ret %ld\n", ns->regs.row, (long)tx);
1562                                 return -1;
1563                         }
1564                 }
1565                 for (i = 0; i < num; i++)
1566                         pg_off[i] &= ns->buf.byte[i];
1567                 if (all) {
1568                         loff_t pos = (loff_t)ns->regs.row * ns->geom.pgszoob;
1569                         tx = write_file(ns, ns->cfile, ns->file_buf, ns->geom.pgszoob, pos);
1570                         if (tx != ns->geom.pgszoob) {
1571                                 NS_ERR("prog_page: write error for page %d ret %ld\n", ns->regs.row, (long)tx);
1572                                 return -1;
1573                         }
1574                         __set_bit(ns->regs.row, ns->pages_written);
1575                 } else {
1576                         tx = write_file(ns, ns->cfile, pg_off, num, off);
1577                         if (tx != num) {
1578                                 NS_ERR("prog_page: write error for page %d ret %ld\n", ns->regs.row, (long)tx);
1579                                 return -1;
1580                         }
1581                 }
1582                 return 0;
1583         }
1584
1585         mypage = NS_GET_PAGE(ns);
1586         if (mypage->byte == NULL) {
1587                 NS_DBG("prog_page: allocating page %d\n", ns->regs.row);
1588                 /*
1589                  * We allocate memory with GFP_NOFS because a flash FS may
1590                  * utilize this. If it is holding an FS lock, then gets here,
1591                  * then kernel memory alloc runs writeback which goes to the FS
1592                  * again and deadlocks. This was seen in practice.
1593                  */
1594                 mypage->byte = kmem_cache_alloc(ns->nand_pages_slab, GFP_NOFS);
1595                 if (mypage->byte == NULL) {
1596                         NS_ERR("prog_page: error allocating memory for page %d\n", ns->regs.row);
1597                         return -1;
1598                 }
1599                 memset(mypage->byte, 0xFF, ns->geom.pgszoob);
1600         }
1601
1602         pg_off = NS_PAGE_BYTE_OFF(ns);
1603         for (i = 0; i < num; i++)
1604                 pg_off[i] &= ns->buf.byte[i];
1605
1606         return 0;
1607 }
1608
1609 /*
1610  * If state has any action bit, perform this action.
1611  *
1612  * RETURNS: 0 if success, -1 if error.
1613  */
1614 static int do_state_action(struct nandsim *ns, uint32_t action)
1615 {
1616         int num;
1617         int busdiv = ns->busw == 8 ? 1 : 2;
1618         unsigned int erase_block_no, page_no;
1619
1620         action &= ACTION_MASK;
1621
1622         /* Check that page address input is correct */
1623         if (action != ACTION_SECERASE && ns->regs.row >= ns->geom.pgnum) {
1624                 NS_WARN("do_state_action: wrong page number (%#x)\n", ns->regs.row);
1625                 return -1;
1626         }
1627
1628         switch (action) {
1629
1630         case ACTION_CPY:
1631                 /*
1632                  * Copy page data to the internal buffer.
1633                  */
1634
1635                 /* Column shouldn't be very large */
1636                 if (ns->regs.column >= (ns->geom.pgszoob - ns->regs.off)) {
1637                         NS_ERR("do_state_action: column number is too large\n");
1638                         break;
1639                 }
1640                 num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
1641                 read_page(ns, num);
1642
1643                 NS_DBG("do_state_action: (ACTION_CPY:) copy %d bytes to int buf, raw offset %d\n",
1644                         num, NS_RAW_OFFSET(ns) + ns->regs.off);
1645
1646                 if (ns->regs.off == 0)
1647                         NS_LOG("read page %d\n", ns->regs.row);
1648                 else if (ns->regs.off < ns->geom.pgsz)
1649                         NS_LOG("read page %d (second half)\n", ns->regs.row);
1650                 else
1651                         NS_LOG("read OOB of page %d\n", ns->regs.row);
1652
1653                 NS_UDELAY(access_delay);
1654                 NS_UDELAY(input_cycle * ns->geom.pgsz / 1000 / busdiv);
1655
1656                 break;
1657
1658         case ACTION_SECERASE:
1659                 /*
1660                  * Erase sector.
1661                  */
1662
1663                 if (ns->lines.wp) {
1664                         NS_ERR("do_state_action: device is write-protected, ignore sector erase\n");
1665                         return -1;
1666                 }
1667
1668                 if (ns->regs.row >= ns->geom.pgnum - ns->geom.pgsec
1669                         || (ns->regs.row & ~(ns->geom.secsz - 1))) {
1670                         NS_ERR("do_state_action: wrong sector address (%#x)\n", ns->regs.row);
1671                         return -1;
1672                 }
1673
1674                 ns->regs.row = (ns->regs.row <<
1675                                 8 * (ns->geom.pgaddrbytes - ns->geom.secaddrbytes)) | ns->regs.column;
1676                 ns->regs.column = 0;
1677
1678                 erase_block_no = ns->regs.row >> (ns->geom.secshift - ns->geom.pgshift);
1679
1680                 NS_DBG("do_state_action: erase sector at address %#x, off = %d\n",
1681                                 ns->regs.row, NS_RAW_OFFSET(ns));
1682                 NS_LOG("erase sector %u\n", erase_block_no);
1683
1684                 erase_sector(ns);
1685
1686                 NS_MDELAY(erase_delay);
1687
1688                 if (erase_block_wear)
1689                         update_wear(erase_block_no);
1690
1691                 if (erase_error(erase_block_no)) {
1692                         NS_WARN("simulating erase failure in erase block %u\n", erase_block_no);
1693                         return -1;
1694                 }
1695
1696                 break;
1697
1698         case ACTION_PRGPAGE:
1699                 /*
1700                  * Program page - move internal buffer data to the page.
1701                  */
1702
1703                 if (ns->lines.wp) {
1704                         NS_WARN("do_state_action: device is write-protected, programm\n");
1705                         return -1;
1706                 }
1707
1708                 num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
1709                 if (num != ns->regs.count) {
1710                         NS_ERR("do_state_action: too few bytes were input (%d instead of %d)\n",
1711                                         ns->regs.count, num);
1712                         return -1;
1713                 }
1714
1715                 if (prog_page(ns, num) == -1)
1716                         return -1;
1717
1718                 page_no = ns->regs.row;
1719
1720                 NS_DBG("do_state_action: copy %d bytes from int buf to (%#x, %#x), raw off = %d\n",
1721                         num, ns->regs.row, ns->regs.column, NS_RAW_OFFSET(ns) + ns->regs.off);
1722                 NS_LOG("programm page %d\n", ns->regs.row);
1723
1724                 NS_UDELAY(programm_delay);
1725                 NS_UDELAY(output_cycle * ns->geom.pgsz / 1000 / busdiv);
1726
1727                 if (write_error(page_no)) {
1728                         NS_WARN("simulating write failure in page %u\n", page_no);
1729                         return -1;
1730                 }
1731
1732                 break;
1733
1734         case ACTION_ZEROOFF:
1735                 NS_DBG("do_state_action: set internal offset to 0\n");
1736                 ns->regs.off = 0;
1737                 break;
1738
1739         case ACTION_HALFOFF:
1740                 if (!(ns->options & OPT_PAGE512_8BIT)) {
1741                         NS_ERR("do_state_action: BUG! can't skip half of page for non-512"
1742                                 "byte page size 8x chips\n");
1743                         return -1;
1744                 }
1745                 NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz/2);
1746                 ns->regs.off = ns->geom.pgsz/2;
1747                 break;
1748
1749         case ACTION_OOBOFF:
1750                 NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz);
1751                 ns->regs.off = ns->geom.pgsz;
1752                 break;
1753
1754         default:
1755                 NS_DBG("do_state_action: BUG! unknown action\n");
1756         }
1757
1758         return 0;
1759 }
1760
1761 /*
1762  * Switch simulator's state.
1763  */
1764 static void switch_state(struct nandsim *ns)
1765 {
1766         if (ns->op) {
1767                 /*
1768                  * The current operation have already been identified.
1769                  * Just follow the states chain.
1770                  */
1771
1772                 ns->stateidx += 1;
1773                 ns->state = ns->nxstate;
1774                 ns->nxstate = ns->op[ns->stateidx + 1];
1775
1776                 NS_DBG("switch_state: operation is known, switch to the next state, "
1777                         "state: %s, nxstate: %s\n",
1778                         get_state_name(ns->state), get_state_name(ns->nxstate));
1779
1780                 /* See, whether we need to do some action */
1781                 if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
1782                         switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
1783                         return;
1784                 }
1785
1786         } else {
1787                 /*
1788                  * We don't yet know which operation we perform.
1789                  * Try to identify it.
1790                  */
1791
1792                 /*
1793                  *  The only event causing the switch_state function to
1794                  *  be called with yet unknown operation is new command.
1795                  */
1796                 ns->state = get_state_by_command(ns->regs.command);
1797
1798                 NS_DBG("switch_state: operation is unknown, try to find it\n");
1799
1800                 if (find_operation(ns, 0) != 0)
1801                         return;
1802
1803                 if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
1804                         switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
1805                         return;
1806                 }
1807         }
1808
1809         /* For 16x devices column means the page offset in words */
1810         if ((ns->nxstate & STATE_ADDR_MASK) && ns->busw == 16) {
1811                 NS_DBG("switch_state: double the column number for 16x device\n");
1812                 ns->regs.column <<= 1;
1813         }
1814
1815         if (NS_STATE(ns->nxstate) == STATE_READY) {
1816                 /*
1817                  * The current state is the last. Return to STATE_READY
1818                  */
1819
1820                 u_char status = NS_STATUS_OK(ns);
1821
1822                 /* In case of data states, see if all bytes were input/output */
1823                 if ((ns->state & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK))
1824                         && ns->regs.count != ns->regs.num) {
1825                         NS_WARN("switch_state: not all bytes were processed, %d left\n",
1826                                         ns->regs.num - ns->regs.count);
1827                         status = NS_STATUS_FAILED(ns);
1828                 }
1829
1830                 NS_DBG("switch_state: operation complete, switch to STATE_READY state\n");
1831
1832                 switch_to_ready_state(ns, status);
1833
1834                 return;
1835         } else if (ns->nxstate & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK)) {
1836                 /*
1837                  * If the next state is data input/output, switch to it now
1838                  */
1839
1840                 ns->state      = ns->nxstate;
1841                 ns->nxstate    = ns->op[++ns->stateidx + 1];
1842                 ns->regs.num   = ns->regs.count = 0;
1843
1844                 NS_DBG("switch_state: the next state is data I/O, switch, "
1845                         "state: %s, nxstate: %s\n",
1846                         get_state_name(ns->state), get_state_name(ns->nxstate));
1847
1848                 /*
1849                  * Set the internal register to the count of bytes which
1850                  * are expected to be input or output
1851                  */
1852                 switch (NS_STATE(ns->state)) {
1853                         case STATE_DATAIN:
1854                         case STATE_DATAOUT:
1855                                 ns->regs.num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
1856                                 break;
1857
1858                         case STATE_DATAOUT_ID:
1859                                 ns->regs.num = ns->geom.idbytes;
1860                                 break;
1861
1862                         case STATE_DATAOUT_STATUS:
1863                         case STATE_DATAOUT_STATUS_M:
1864                                 ns->regs.count = ns->regs.num = 0;
1865                                 break;
1866
1867                         default:
1868                                 NS_ERR("switch_state: BUG! unknown data state\n");
1869                 }
1870
1871         } else if (ns->nxstate & STATE_ADDR_MASK) {
1872                 /*
1873                  * If the next state is address input, set the internal
1874                  * register to the number of expected address bytes
1875                  */
1876
1877                 ns->regs.count = 0;
1878
1879                 switch (NS_STATE(ns->nxstate)) {
1880                         case STATE_ADDR_PAGE:
1881                                 ns->regs.num = ns->geom.pgaddrbytes;
1882
1883                                 break;
1884                         case STATE_ADDR_SEC:
1885                                 ns->regs.num = ns->geom.secaddrbytes;
1886                                 break;
1887
1888                         case STATE_ADDR_ZERO:
1889                                 ns->regs.num = 1;
1890                                 break;
1891
1892                         case STATE_ADDR_COLUMN:
1893                                 /* Column address is always 2 bytes */
1894                                 ns->regs.num = ns->geom.pgaddrbytes - ns->geom.secaddrbytes;
1895                                 break;
1896
1897                         default:
1898                                 NS_ERR("switch_state: BUG! unknown address state\n");
1899                 }
1900         } else {
1901                 /*
1902                  * Just reset internal counters.
1903                  */
1904
1905                 ns->regs.num = 0;
1906                 ns->regs.count = 0;
1907         }
1908 }
1909
1910 static u_char ns_nand_read_byte(struct mtd_info *mtd)
1911 {
1912         struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
1913         u_char outb = 0x00;
1914
1915         /* Sanity and correctness checks */
1916         if (!ns->lines.ce) {
1917                 NS_ERR("read_byte: chip is disabled, return %#x\n", (uint)outb);
1918                 return outb;
1919         }
1920         if (ns->lines.ale || ns->lines.cle) {
1921                 NS_ERR("read_byte: ALE or CLE pin is high, return %#x\n", (uint)outb);
1922                 return outb;
1923         }
1924         if (!(ns->state & STATE_DATAOUT_MASK)) {
1925                 NS_WARN("read_byte: unexpected data output cycle, state is %s "
1926                         "return %#x\n", get_state_name(ns->state), (uint)outb);
1927                 return outb;
1928         }
1929
1930         /* Status register may be read as many times as it is wanted */
1931         if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS) {
1932                 NS_DBG("read_byte: return %#x status\n", ns->regs.status);
1933                 return ns->regs.status;
1934         }
1935
1936         /* Check if there is any data in the internal buffer which may be read */
1937         if (ns->regs.count == ns->regs.num) {
1938                 NS_WARN("read_byte: no more data to output, return %#x\n", (uint)outb);
1939                 return outb;
1940         }
1941
1942         switch (NS_STATE(ns->state)) {
1943                 case STATE_DATAOUT:
1944                         if (ns->busw == 8) {
1945                                 outb = ns->buf.byte[ns->regs.count];
1946                                 ns->regs.count += 1;
1947                         } else {
1948                                 outb = (u_char)cpu_to_le16(ns->buf.word[ns->regs.count >> 1]);
1949                                 ns->regs.count += 2;
1950                         }
1951                         break;
1952                 case STATE_DATAOUT_ID:
1953                         NS_DBG("read_byte: read ID byte %d, total = %d\n", ns->regs.count, ns->regs.num);
1954                         outb = ns->ids[ns->regs.count];
1955                         ns->regs.count += 1;
1956                         break;
1957                 default:
1958                         BUG();
1959         }
1960
1961         if (ns->regs.count == ns->regs.num) {
1962                 NS_DBG("read_byte: all bytes were read\n");
1963
1964                 if (NS_STATE(ns->nxstate) == STATE_READY)
1965                         switch_state(ns);
1966         }
1967
1968         return outb;
1969 }
1970
1971 static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
1972 {
1973         struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
1974
1975         /* Sanity and correctness checks */
1976         if (!ns->lines.ce) {
1977                 NS_ERR("write_byte: chip is disabled, ignore write\n");
1978                 return;
1979         }
1980         if (ns->lines.ale && ns->lines.cle) {
1981                 NS_ERR("write_byte: ALE and CLE pins are high simultaneously, ignore write\n");
1982                 return;
1983         }
1984
1985         if (ns->lines.cle == 1) {
1986                 /*
1987                  * The byte written is a command.
1988                  */
1989
1990                 if (byte == NAND_CMD_RESET) {
1991                         NS_LOG("reset chip\n");
1992                         switch_to_ready_state(ns, NS_STATUS_OK(ns));
1993                         return;
1994                 }
1995
1996                 /* Check that the command byte is correct */
1997                 if (check_command(byte)) {
1998                         NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
1999                         return;
2000                 }
2001
2002                 if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
2003                         || NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M
2004                         || NS_STATE(ns->state) == STATE_DATAOUT) {
2005                         int row = ns->regs.row;
2006
2007                         switch_state(ns);
2008                         if (byte == NAND_CMD_RNDOUT)
2009                                 ns->regs.row = row;
2010                 }
2011
2012                 /* Check if chip is expecting command */
2013                 if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) {
2014                         /* Do not warn if only 2 id bytes are read */
2015                         if (!(ns->regs.command == NAND_CMD_READID &&
2016                             NS_STATE(ns->state) == STATE_DATAOUT_ID && ns->regs.count == 2)) {
2017                                 /*
2018                                  * We are in situation when something else (not command)
2019                                  * was expected but command was input. In this case ignore
2020                                  * previous command(s)/state(s) and accept the last one.
2021                                  */
2022                                 NS_WARN("write_byte: command (%#x) wasn't expected, expected state is %s, "
2023                                         "ignore previous states\n", (uint)byte, get_state_name(ns->nxstate));
2024                         }
2025                         switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2026                 }
2027
2028                 NS_DBG("command byte corresponding to %s state accepted\n",
2029                         get_state_name(get_state_by_command(byte)));
2030                 ns->regs.command = byte;
2031                 switch_state(ns);
2032
2033         } else if (ns->lines.ale == 1) {
2034                 /*
2035                  * The byte written is an address.
2036                  */
2037
2038                 if (NS_STATE(ns->nxstate) == STATE_UNKNOWN) {
2039
2040                         NS_DBG("write_byte: operation isn't known yet, identify it\n");
2041
2042                         if (find_operation(ns, 1) < 0)
2043                                 return;
2044
2045                         if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
2046                                 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2047                                 return;
2048                         }
2049
2050                         ns->regs.count = 0;
2051                         switch (NS_STATE(ns->nxstate)) {
2052                                 case STATE_ADDR_PAGE:
2053                                         ns->regs.num = ns->geom.pgaddrbytes;
2054                                         break;
2055                                 case STATE_ADDR_SEC:
2056                                         ns->regs.num = ns->geom.secaddrbytes;
2057                                         break;
2058                                 case STATE_ADDR_ZERO:
2059                                         ns->regs.num = 1;
2060                                         break;
2061                                 default:
2062                                         BUG();
2063                         }
2064                 }
2065
2066                 /* Check that chip is expecting address */
2067                 if (!(ns->nxstate & STATE_ADDR_MASK)) {
2068                         NS_ERR("write_byte: address (%#x) isn't expected, expected state is %s, "
2069                                 "switch to STATE_READY\n", (uint)byte, get_state_name(ns->nxstate));
2070                         switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2071                         return;
2072                 }
2073
2074                 /* Check if this is expected byte */
2075                 if (ns->regs.count == ns->regs.num) {
2076                         NS_ERR("write_byte: no more address bytes expected\n");
2077                         switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2078                         return;
2079                 }
2080
2081                 accept_addr_byte(ns, byte);
2082
2083                 ns->regs.count += 1;
2084
2085                 NS_DBG("write_byte: address byte %#x was accepted (%d bytes input, %d expected)\n",
2086                                 (uint)byte, ns->regs.count, ns->regs.num);
2087
2088                 if (ns->regs.count == ns->regs.num) {
2089                         NS_DBG("address (%#x, %#x) is accepted\n", ns->regs.row, ns->regs.column);
2090                         switch_state(ns);
2091                 }
2092
2093         } else {
2094                 /*
2095                  * The byte written is an input data.
2096                  */
2097
2098                 /* Check that chip is expecting data input */
2099                 if (!(ns->state & STATE_DATAIN_MASK)) {
2100                         NS_ERR("write_byte: data input (%#x) isn't expected, state is %s, "
2101                                 "switch to %s\n", (uint)byte,
2102                                 get_state_name(ns->state), get_state_name(STATE_READY));
2103                         switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2104                         return;
2105                 }
2106
2107                 /* Check if this is expected byte */
2108                 if (ns->regs.count == ns->regs.num) {
2109                         NS_WARN("write_byte: %u input bytes has already been accepted, ignore write\n",
2110                                         ns->regs.num);
2111                         return;
2112                 }
2113
2114                 if (ns->busw == 8) {
2115                         ns->buf.byte[ns->regs.count] = byte;
2116                         ns->regs.count += 1;
2117                 } else {
2118                         ns->buf.word[ns->regs.count >> 1] = cpu_to_le16((uint16_t)byte);
2119                         ns->regs.count += 2;
2120                 }
2121         }
2122
2123         return;
2124 }
2125
2126 static void ns_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int bitmask)
2127 {
2128         struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
2129
2130         ns->lines.cle = bitmask & NAND_CLE ? 1 : 0;
2131         ns->lines.ale = bitmask & NAND_ALE ? 1 : 0;
2132         ns->lines.ce = bitmask & NAND_NCE ? 1 : 0;
2133
2134         if (cmd != NAND_CMD_NONE)
2135                 ns_nand_write_byte(mtd, cmd);
2136 }
2137
2138 static int ns_device_ready(struct mtd_info *mtd)
2139 {
2140         NS_DBG("device_ready\n");
2141         return 1;
2142 }
2143
2144 static uint16_t ns_nand_read_word(struct mtd_info *mtd)
2145 {
2146         struct nand_chip *chip = (struct nand_chip *)mtd->priv;
2147
2148         NS_DBG("read_word\n");
2149
2150         return chip->read_byte(mtd) | (chip->read_byte(mtd) << 8);
2151 }
2152
2153 static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
2154 {
2155         struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
2156
2157         /* Check that chip is expecting data input */
2158         if (!(ns->state & STATE_DATAIN_MASK)) {
2159                 NS_ERR("write_buf: data input isn't expected, state is %s, "
2160                         "switch to STATE_READY\n", get_state_name(ns->state));
2161                 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2162                 return;
2163         }
2164
2165         /* Check if these are expected bytes */
2166         if (ns->regs.count + len > ns->regs.num) {
2167                 NS_ERR("write_buf: too many input bytes\n");
2168                 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2169                 return;
2170         }
2171
2172         memcpy(ns->buf.byte + ns->regs.count, buf, len);
2173         ns->regs.count += len;
2174
2175         if (ns->regs.count == ns->regs.num) {
2176                 NS_DBG("write_buf: %d bytes were written\n", ns->regs.count);
2177         }
2178 }
2179
2180 static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
2181 {
2182         struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
2183
2184         /* Sanity and correctness checks */
2185         if (!ns->lines.ce) {
2186                 NS_ERR("read_buf: chip is disabled\n");
2187                 return;
2188         }
2189         if (ns->lines.ale || ns->lines.cle) {
2190                 NS_ERR("read_buf: ALE or CLE pin is high\n");
2191                 return;
2192         }
2193         if (!(ns->state & STATE_DATAOUT_MASK)) {
2194                 NS_WARN("read_buf: unexpected data output cycle, current state is %s\n",
2195                         get_state_name(ns->state));
2196                 return;
2197         }
2198
2199         if (NS_STATE(ns->state) != STATE_DATAOUT) {
2200                 int i;
2201
2202                 for (i = 0; i < len; i++)
2203                         buf[i] = ((struct nand_chip *)mtd->priv)->read_byte(mtd);
2204
2205                 return;
2206         }
2207
2208         /* Check if these are expected bytes */
2209         if (ns->regs.count + len > ns->regs.num) {
2210                 NS_ERR("read_buf: too many bytes to read\n");
2211                 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2212                 return;
2213         }
2214
2215         memcpy(buf, ns->buf.byte + ns->regs.count, len);
2216         ns->regs.count += len;
2217
2218         if (ns->regs.count == ns->regs.num) {
2219                 if (NS_STATE(ns->nxstate) == STATE_READY)
2220                         switch_state(ns);
2221         }
2222
2223         return;
2224 }
2225
2226 /*
2227  * Module initialization function
2228  */
2229 static int __init ns_init_module(void)
2230 {
2231         struct nand_chip *chip;
2232         struct nandsim *nand;
2233         int retval = -ENOMEM, i;
2234
2235         if (bus_width != 8 && bus_width != 16) {
2236                 NS_ERR("wrong bus width (%d), use only 8 or 16\n", bus_width);
2237                 return -EINVAL;
2238         }
2239
2240         /* Allocate and initialize mtd_info, nand_chip and nandsim structures */
2241         nsmtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip)
2242                                 + sizeof(struct nandsim), GFP_KERNEL);
2243         if (!nsmtd) {
2244                 NS_ERR("unable to allocate core structures.\n");
2245                 return -ENOMEM;
2246         }
2247         chip        = (struct nand_chip *)(nsmtd + 1);
2248         nsmtd->priv = (void *)chip;
2249         nand        = (struct nandsim *)(chip + 1);
2250         chip->priv  = (void *)nand;
2251
2252         /*
2253          * Register simulator's callbacks.
2254          */
2255         chip->cmd_ctrl   = ns_hwcontrol;
2256         chip->read_byte  = ns_nand_read_byte;
2257         chip->dev_ready  = ns_device_ready;
2258         chip->write_buf  = ns_nand_write_buf;
2259         chip->read_buf   = ns_nand_read_buf;
2260         chip->read_word  = ns_nand_read_word;
2261         chip->ecc.mode   = NAND_ECC_SOFT;
2262         /* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
2263         /* and 'badblocks' parameters to work */
2264         chip->options   |= NAND_SKIP_BBTSCAN;
2265
2266         switch (bbt) {
2267         case 2:
2268                  chip->bbt_options |= NAND_BBT_NO_OOB;
2269         case 1:
2270                  chip->bbt_options |= NAND_BBT_USE_FLASH;
2271         case 0:
2272                 break;
2273         default:
2274                 NS_ERR("bbt has to be 0..2\n");
2275                 retval = -EINVAL;
2276                 goto error;
2277         }
2278         /*
2279          * Perform minimum nandsim structure initialization to handle
2280          * the initial ID read command correctly
2281          */
2282         if (third_id_byte != 0xFF || fourth_id_byte != 0xFF)
2283                 nand->geom.idbytes = 4;
2284         else
2285                 nand->geom.idbytes = 2;
2286         nand->regs.status = NS_STATUS_OK(nand);
2287         nand->nxstate = STATE_UNKNOWN;
2288         nand->options |= OPT_PAGE512; /* temporary value */
2289         nand->ids[0] = first_id_byte;
2290         nand->ids[1] = second_id_byte;
2291         nand->ids[2] = third_id_byte;
2292         nand->ids[3] = fourth_id_byte;
2293         if (bus_width == 16) {
2294                 nand->busw = 16;
2295                 chip->options |= NAND_BUSWIDTH_16;
2296         }
2297
2298         nsmtd->owner = THIS_MODULE;
2299
2300         if ((retval = parse_weakblocks()) != 0)
2301                 goto error;
2302
2303         if ((retval = parse_weakpages()) != 0)
2304                 goto error;
2305
2306         if ((retval = parse_gravepages()) != 0)
2307                 goto error;
2308
2309         retval = nand_scan_ident(nsmtd, 1, NULL);
2310         if (retval) {
2311                 NS_ERR("cannot scan NAND Simulator device\n");
2312                 if (retval > 0)
2313                         retval = -ENXIO;
2314                 goto error;
2315         }
2316
2317         if (bch) {
2318                 unsigned int eccsteps, eccbytes;
2319                 if (!mtd_nand_has_bch()) {
2320                         NS_ERR("BCH ECC support is disabled\n");
2321                         retval = -EINVAL;
2322                         goto error;
2323                 }
2324                 /* use 512-byte ecc blocks */
2325                 eccsteps = nsmtd->writesize/512;
2326                 eccbytes = (bch*13+7)/8;
2327                 /* do not bother supporting small page devices */
2328                 if ((nsmtd->oobsize < 64) || !eccsteps) {
2329                         NS_ERR("bch not available on small page devices\n");
2330                         retval = -EINVAL;
2331                         goto error;
2332                 }
2333                 if ((eccbytes*eccsteps+2) > nsmtd->oobsize) {
2334                         NS_ERR("invalid bch value %u\n", bch);
2335                         retval = -EINVAL;
2336                         goto error;
2337                 }
2338                 chip->ecc.mode = NAND_ECC_SOFT_BCH;
2339                 chip->ecc.size = 512;
2340                 chip->ecc.bytes = eccbytes;
2341                 NS_INFO("using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
2342         }
2343
2344         retval = nand_scan_tail(nsmtd);
2345         if (retval) {
2346                 NS_ERR("can't register NAND Simulator\n");
2347                 if (retval > 0)
2348                         retval = -ENXIO;
2349                 goto error;
2350         }
2351
2352         if (overridesize) {
2353                 uint64_t new_size = (uint64_t)nsmtd->erasesize << overridesize;
2354                 if (new_size >> overridesize != nsmtd->erasesize) {
2355                         NS_ERR("overridesize is too big\n");
2356                         retval = -EINVAL;
2357                         goto err_exit;
2358                 }
2359                 /* N.B. This relies on nand_scan not doing anything with the size before we change it */
2360                 nsmtd->size = new_size;
2361                 chip->chipsize = new_size;
2362                 chip->chip_shift = ffs(nsmtd->erasesize) + overridesize - 1;
2363                 chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
2364         }
2365
2366         if ((retval = setup_wear_reporting(nsmtd)) != 0)
2367                 goto err_exit;
2368
2369         if ((retval = nandsim_debugfs_create(nand)) != 0)
2370                 goto err_exit;
2371
2372         if ((retval = init_nandsim(nsmtd)) != 0)
2373                 goto err_exit;
2374
2375         if ((retval = chip->scan_bbt(nsmtd)) != 0)
2376                 goto err_exit;
2377
2378         if ((retval = parse_badblocks(nand, nsmtd)) != 0)
2379                 goto err_exit;
2380
2381         /* Register NAND partitions */
2382         retval = mtd_device_register(nsmtd, &nand->partitions[0],
2383                                      nand->nbparts);
2384         if (retval != 0)
2385                 goto err_exit;
2386
2387         return 0;
2388
2389 err_exit:
2390         free_nandsim(nand);
2391         nand_release(nsmtd);
2392         for (i = 0;i < ARRAY_SIZE(nand->partitions); ++i)
2393                 kfree(nand->partitions[i].name);
2394 error:
2395         kfree(nsmtd);
2396         free_lists();
2397
2398         return retval;
2399 }
2400
2401 module_init(ns_init_module);
2402
2403 /*
2404  * Module clean-up function
2405  */
2406 static void __exit ns_cleanup_module(void)
2407 {
2408         struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv;
2409         int i;
2410
2411         nandsim_debugfs_remove(ns);
2412         free_nandsim(ns);    /* Free nandsim private resources */
2413         nand_release(nsmtd); /* Unregister driver */
2414         for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i)
2415                 kfree(ns->partitions[i].name);
2416         kfree(nsmtd);        /* Free other structures */
2417         free_lists();
2418 }
2419
2420 module_exit(ns_cleanup_module);
2421
2422 MODULE_LICENSE ("GPL");
2423 MODULE_AUTHOR ("Artem B. Bityuckiy");
2424 MODULE_DESCRIPTION ("The NAND flash simulator");