arcnet: Expand odd BUGLVL macro with if and uses
[cascardo/linux.git] / drivers / net / arcnet / rfc1051.c
1 /*
2  * Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation
3  *
4  * Written 1994-1999 by Avery Pennarun.
5  * Derived from skeleton.c by Donald Becker.
6  *
7  * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
8  *  for sponsoring the further development of this driver.
9  *
10  * **********************
11  *
12  * The original copyright of skeleton.c was as follows:
13  *
14  * skeleton.c Written 1993 by Donald Becker.
15  * Copyright 1993 United States Government as represented by the
16  * Director, National Security Agency.  This software may only be used
17  * and distributed according to the terms of the GNU General Public License as
18  * modified by SRC, incorporated herein by reference.
19  *
20  * **********************
21  *
22  * For more details, see drivers/net/arcnet.c
23  *
24  * **********************
25  */
26 #include <linux/module.h>
27 #include <linux/gfp.h>
28 #include <linux/init.h>
29 #include <linux/if_arp.h>
30 #include <net/arp.h>
31 #include <linux/netdevice.h>
32 #include <linux/skbuff.h>
33 #include <linux/arcdevice.h>
34
35 #define VERSION "arcnet: RFC1051 \"simple standard\" (`s') encapsulation support loaded.\n"
36
37 static __be16 type_trans(struct sk_buff *skb, struct net_device *dev);
38 static void rx(struct net_device *dev, int bufnum,
39                struct archdr *pkthdr, int length);
40 static int build_header(struct sk_buff *skb, struct net_device *dev,
41                         unsigned short type, uint8_t daddr);
42 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
43                       int bufnum);
44
45 static struct ArcProto rfc1051_proto = {
46         .suffix         = 's',
47         .mtu            = XMTU - RFC1051_HDR_SIZE,
48         .is_ip          = 1,
49         .rx             = rx,
50         .build_header   = build_header,
51         .prepare_tx     = prepare_tx,
52         .continue_tx    = NULL,
53         .ack_tx         = NULL
54 };
55
56 static int __init arcnet_rfc1051_init(void)
57 {
58         printk(VERSION);
59
60         arc_proto_map[ARC_P_IP_RFC1051]
61             = arc_proto_map[ARC_P_ARP_RFC1051]
62             = &rfc1051_proto;
63
64         /* if someone else already owns the broadcast, we won't take it */
65         if (arc_bcast_proto == arc_proto_default)
66                 arc_bcast_proto = &rfc1051_proto;
67
68         return 0;
69 }
70
71 static void __exit arcnet_rfc1051_exit(void)
72 {
73         arcnet_unregister_proto(&rfc1051_proto);
74 }
75
76 module_init(arcnet_rfc1051_init);
77 module_exit(arcnet_rfc1051_exit);
78
79 MODULE_LICENSE("GPL");
80
81 /* Determine a packet's protocol ID.
82  *
83  * With ARCnet we have to convert everything to Ethernet-style stuff.
84  */
85 static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
86 {
87         struct archdr *pkt = (struct archdr *)skb->data;
88         struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
89         int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
90
91         /* Pull off the arcnet header. */
92         skb_reset_mac_header(skb);
93         skb_pull(skb, hdr_size);
94
95         if (pkt->hard.dest == 0) {
96                 skb->pkt_type = PACKET_BROADCAST;
97         } else if (dev->flags & IFF_PROMISC) {
98                 /* if we're not sending to ourselves :) */
99                 if (pkt->hard.dest != dev->dev_addr[0])
100                         skb->pkt_type = PACKET_OTHERHOST;
101         }
102         /* now return the protocol number */
103         switch (soft->proto) {
104         case ARC_P_IP_RFC1051:
105                 return htons(ETH_P_IP);
106         case ARC_P_ARP_RFC1051:
107                 return htons(ETH_P_ARP);
108
109         default:
110                 dev->stats.rx_errors++;
111                 dev->stats.rx_crc_errors++;
112                 return 0;
113         }
114
115         return htons(ETH_P_IP);
116 }
117
118 /* packet receiver */
119 static void rx(struct net_device *dev, int bufnum,
120                struct archdr *pkthdr, int length)
121 {
122         struct arcnet_local *lp = netdev_priv(dev);
123         struct sk_buff *skb;
124         struct archdr *pkt = pkthdr;
125         int ofs;
126
127         BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
128
129         if (length >= MinTU)
130                 ofs = 512 - length;
131         else
132                 ofs = 256 - length;
133
134         skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
135         if (skb == NULL) {
136                 BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
137                 dev->stats.rx_dropped++;
138                 return;
139         }
140         skb_put(skb, length + ARC_HDR_SIZE);
141         skb->dev = dev;
142
143         pkt = (struct archdr *)skb->data;
144
145         /* up to sizeof(pkt->soft) has already been copied from the card */
146         memcpy(pkt, pkthdr, sizeof(struct archdr));
147         if (length > sizeof(pkt->soft))
148                 lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
149                                       pkt->soft.raw + sizeof(pkt->soft),
150                                       length - sizeof(pkt->soft));
151
152         if (BUGLVL(D_SKB))
153                 arcnet_dump_skb(dev, skb, "rx");
154
155         skb->protocol = type_trans(skb, dev);
156         netif_rx(skb);
157 }
158
159 /* Create the ARCnet hard/soft headers for RFC1051 */
160 static int build_header(struct sk_buff *skb, struct net_device *dev,
161                         unsigned short type, uint8_t daddr)
162 {
163         int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
164         struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
165         struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
166
167         /* set the protocol ID according to RFC1051 */
168         switch (type) {
169         case ETH_P_IP:
170                 soft->proto = ARC_P_IP_RFC1051;
171                 break;
172         case ETH_P_ARP:
173                 soft->proto = ARC_P_ARP_RFC1051;
174                 break;
175         default:
176                 BUGMSG(D_NORMAL, "RFC1051: I don't understand protocol %d (%Xh)\n",
177                        type, type);
178                 dev->stats.tx_errors++;
179                 dev->stats.tx_aborted_errors++;
180                 return 0;
181         }
182
183         /* Set the source hardware address.
184          *
185          * This is pretty pointless for most purposes, but it can help in
186          * debugging.  ARCnet does not allow us to change the source address
187          * in the actual packet sent.
188          */
189         pkt->hard.source = *dev->dev_addr;
190
191         /* see linux/net/ethernet/eth.c to see where I got the following */
192
193         if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
194                 /* FIXME: fill in the last byte of the dest ipaddr here to
195                  * better comply with RFC1051 in "noarp" mode.
196                  */
197                 pkt->hard.dest = 0;
198                 return hdr_size;
199         }
200         /* otherwise, just fill it in and go! */
201         pkt->hard.dest = daddr;
202
203         return hdr_size;        /* success */
204 }
205
206 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
207                       int bufnum)
208 {
209         struct arcnet_local *lp = netdev_priv(dev);
210         struct arc_hardware *hard = &pkt->hard;
211         int ofs;
212
213         BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
214                lp->next_tx, lp->cur_tx, bufnum);
215
216         length -= ARC_HDR_SIZE; /* hard header is not included in packet length */
217
218         if (length > XMTU) {
219                 /* should never happen! other people already check for this. */
220                 BUGMSG(D_NORMAL, "Bug!  prepare_tx with size %d (> %d)\n",
221                        length, XMTU);
222                 length = XMTU;
223         }
224         if (length > MinTU) {
225                 hard->offset[0] = 0;
226                 hard->offset[1] = ofs = 512 - length;
227         } else if (length > MTU) {
228                 hard->offset[0] = 0;
229                 hard->offset[1] = ofs = 512 - length - 3;
230         } else {
231                 hard->offset[0] = ofs = 256 - length;
232         }
233
234         lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
235         lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
236
237         lp->lastload_dest = hard->dest;
238
239         return 1;               /* done */
240 }