e78b76535acc3919fd3647ebaefb90aef4767bfd
[cascardo/linux.git] / drivers / net / arcnet / rfc1051.c
1 /*
2  * Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation
3  *
4  * Written 1994-1999 by Avery Pennarun.
5  * Derived from skeleton.c by Donald Becker.
6  *
7  * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
8  *  for sponsoring the further development of this driver.
9  *
10  * **********************
11  *
12  * The original copyright of skeleton.c was as follows:
13  *
14  * skeleton.c Written 1993 by Donald Becker.
15  * Copyright 1993 United States Government as represented by the
16  * Director, National Security Agency.  This software may only be used
17  * and distributed according to the terms of the GNU General Public License as
18  * modified by SRC, incorporated herein by reference.
19  *
20  * **********************
21  *
22  * For more details, see drivers/net/arcnet.c
23  *
24  * **********************
25  */
26 #include <linux/module.h>
27 #include <linux/gfp.h>
28 #include <linux/init.h>
29 #include <linux/if_arp.h>
30 #include <net/arp.h>
31 #include <linux/netdevice.h>
32 #include <linux/skbuff.h>
33 #include <linux/arcdevice.h>
34
35 #define VERSION "arcnet: RFC1051 \"simple standard\" (`s') encapsulation support loaded.\n"
36
37 static __be16 type_trans(struct sk_buff *skb, struct net_device *dev);
38 static void rx(struct net_device *dev, int bufnum,
39                struct archdr *pkthdr, int length);
40 static int build_header(struct sk_buff *skb, struct net_device *dev,
41                         unsigned short type, uint8_t daddr);
42 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
43                       int bufnum);
44
45 static struct ArcProto rfc1051_proto = {
46         .suffix         = 's',
47         .mtu            = XMTU - RFC1051_HDR_SIZE,
48         .is_ip          = 1,
49         .rx             = rx,
50         .build_header   = build_header,
51         .prepare_tx     = prepare_tx,
52         .continue_tx    = NULL,
53         .ack_tx         = NULL
54 };
55
56 static int __init arcnet_rfc1051_init(void)
57 {
58         printk(VERSION);
59
60         arc_proto_map[ARC_P_IP_RFC1051]
61             = arc_proto_map[ARC_P_ARP_RFC1051]
62             = &rfc1051_proto;
63
64         /* if someone else already owns the broadcast, we won't take it */
65         if (arc_bcast_proto == arc_proto_default)
66                 arc_bcast_proto = &rfc1051_proto;
67
68         return 0;
69 }
70
71 static void __exit arcnet_rfc1051_exit(void)
72 {
73         arcnet_unregister_proto(&rfc1051_proto);
74 }
75
76 module_init(arcnet_rfc1051_init);
77 module_exit(arcnet_rfc1051_exit);
78
79 MODULE_LICENSE("GPL");
80
81 /* Determine a packet's protocol ID.
82  *
83  * With ARCnet we have to convert everything to Ethernet-style stuff.
84  */
85 static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
86 {
87         struct archdr *pkt = (struct archdr *)skb->data;
88         struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
89         int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
90
91         /* Pull off the arcnet header. */
92         skb_reset_mac_header(skb);
93         skb_pull(skb, hdr_size);
94
95         if (pkt->hard.dest == 0) {
96                 skb->pkt_type = PACKET_BROADCAST;
97         } else if (dev->flags & IFF_PROMISC) {
98                 /* if we're not sending to ourselves :) */
99                 if (pkt->hard.dest != dev->dev_addr[0])
100                         skb->pkt_type = PACKET_OTHERHOST;
101         }
102         /* now return the protocol number */
103         switch (soft->proto) {
104         case ARC_P_IP_RFC1051:
105                 return htons(ETH_P_IP);
106         case ARC_P_ARP_RFC1051:
107                 return htons(ETH_P_ARP);
108
109         default:
110                 dev->stats.rx_errors++;
111                 dev->stats.rx_crc_errors++;
112                 return 0;
113         }
114
115         return htons(ETH_P_IP);
116 }
117
118 /* packet receiver */
119 static void rx(struct net_device *dev, int bufnum,
120                struct archdr *pkthdr, int length)
121 {
122         struct arcnet_local *lp = netdev_priv(dev);
123         struct sk_buff *skb;
124         struct archdr *pkt = pkthdr;
125         int ofs;
126
127         BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
128
129         if (length >= MinTU)
130                 ofs = 512 - length;
131         else
132                 ofs = 256 - length;
133
134         skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
135         if (skb == NULL) {
136                 BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
137                 dev->stats.rx_dropped++;
138                 return;
139         }
140         skb_put(skb, length + ARC_HDR_SIZE);
141         skb->dev = dev;
142
143         pkt = (struct archdr *)skb->data;
144
145         /* up to sizeof(pkt->soft) has already been copied from the card */
146         memcpy(pkt, pkthdr, sizeof(struct archdr));
147         if (length > sizeof(pkt->soft))
148                 lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
149                                       pkt->soft.raw + sizeof(pkt->soft),
150                                       length - sizeof(pkt->soft));
151
152         BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
153
154         skb->protocol = type_trans(skb, dev);
155         netif_rx(skb);
156 }
157
158 /* Create the ARCnet hard/soft headers for RFC1051 */
159 static int build_header(struct sk_buff *skb, struct net_device *dev,
160                         unsigned short type, uint8_t daddr)
161 {
162         int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
163         struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
164         struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
165
166         /* set the protocol ID according to RFC1051 */
167         switch (type) {
168         case ETH_P_IP:
169                 soft->proto = ARC_P_IP_RFC1051;
170                 break;
171         case ETH_P_ARP:
172                 soft->proto = ARC_P_ARP_RFC1051;
173                 break;
174         default:
175                 BUGMSG(D_NORMAL, "RFC1051: I don't understand protocol %d (%Xh)\n",
176                        type, type);
177                 dev->stats.tx_errors++;
178                 dev->stats.tx_aborted_errors++;
179                 return 0;
180         }
181
182         /* Set the source hardware address.
183          *
184          * This is pretty pointless for most purposes, but it can help in
185          * debugging.  ARCnet does not allow us to change the source address
186          * in the actual packet sent.
187          */
188         pkt->hard.source = *dev->dev_addr;
189
190         /* see linux/net/ethernet/eth.c to see where I got the following */
191
192         if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
193                 /* FIXME: fill in the last byte of the dest ipaddr here to
194                  * better comply with RFC1051 in "noarp" mode.
195                  */
196                 pkt->hard.dest = 0;
197                 return hdr_size;
198         }
199         /* otherwise, just fill it in and go! */
200         pkt->hard.dest = daddr;
201
202         return hdr_size;        /* success */
203 }
204
205 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
206                       int bufnum)
207 {
208         struct arcnet_local *lp = netdev_priv(dev);
209         struct arc_hardware *hard = &pkt->hard;
210         int ofs;
211
212         BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
213                lp->next_tx, lp->cur_tx, bufnum);
214
215         length -= ARC_HDR_SIZE; /* hard header is not included in packet length */
216
217         if (length > XMTU) {
218                 /* should never happen! other people already check for this. */
219                 BUGMSG(D_NORMAL, "Bug!  prepare_tx with size %d (> %d)\n",
220                        length, XMTU);
221                 length = XMTU;
222         }
223         if (length > MinTU) {
224                 hard->offset[0] = 0;
225                 hard->offset[1] = ofs = 512 - length;
226         } else if (length > MTU) {
227                 hard->offset[0] = 0;
228                 hard->offset[1] = ofs = 512 - length - 3;
229         } else {
230                 hard->offset[0] = ofs = 256 - length;
231         }
232
233         lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
234         lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
235
236         lp->lastload_dest = hard->dest;
237
238         return 1;               /* done */
239 }