Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next...
[cascardo/linux.git] / drivers / net / ethernet / intel / ixgbe / ixgbe_sriov.c
1 /*******************************************************************************
2
3   Intel 10 Gigabit PCI Express Linux driver
4   Copyright(c) 1999 - 2015 Intel Corporation.
5
6   This program is free software; you can redistribute it and/or modify it
7   under the terms and conditions of the GNU General Public License,
8   version 2, as published by the Free Software Foundation.
9
10   This program is distributed in the hope it will be useful, but WITHOUT
11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13   more details.
14
15   You should have received a copy of the GNU General Public License along with
16   this program; if not, write to the Free Software Foundation, Inc.,
17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18
19   The full GNU General Public License is included in this distribution in
20   the file called "COPYING".
21
22   Contact Information:
23   Linux NICS <linux.nics@intel.com>
24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26
27 *******************************************************************************/
28
29 #include <linux/types.h>
30 #include <linux/module.h>
31 #include <linux/pci.h>
32 #include <linux/netdevice.h>
33 #include <linux/vmalloc.h>
34 #include <linux/string.h>
35 #include <linux/in.h>
36 #include <linux/ip.h>
37 #include <linux/tcp.h>
38 #include <linux/ipv6.h>
39 #include <linux/if_bridge.h>
40 #ifdef NETIF_F_HW_VLAN_CTAG_TX
41 #include <linux/if_vlan.h>
42 #endif
43
44 #include "ixgbe.h"
45 #include "ixgbe_type.h"
46 #include "ixgbe_sriov.h"
47
48 #ifdef CONFIG_PCI_IOV
49 static int __ixgbe_enable_sriov(struct ixgbe_adapter *adapter)
50 {
51         struct ixgbe_hw *hw = &adapter->hw;
52         int num_vf_macvlans, i;
53         struct vf_macvlans *mv_list;
54
55         adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
56         e_info(probe, "SR-IOV enabled with %d VFs\n", adapter->num_vfs);
57
58         /* Enable VMDq flag so device will be set in VM mode */
59         adapter->flags |= IXGBE_FLAG_VMDQ_ENABLED;
60         if (!adapter->ring_feature[RING_F_VMDQ].limit)
61                 adapter->ring_feature[RING_F_VMDQ].limit = 1;
62         adapter->ring_feature[RING_F_VMDQ].offset = adapter->num_vfs;
63
64         num_vf_macvlans = hw->mac.num_rar_entries -
65         (IXGBE_MAX_PF_MACVLANS + 1 + adapter->num_vfs);
66
67         adapter->mv_list = mv_list = kcalloc(num_vf_macvlans,
68                                              sizeof(struct vf_macvlans),
69                                              GFP_KERNEL);
70         if (mv_list) {
71                 /* Initialize list of VF macvlans */
72                 INIT_LIST_HEAD(&adapter->vf_mvs.l);
73                 for (i = 0; i < num_vf_macvlans; i++) {
74                         mv_list->vf = -1;
75                         mv_list->free = true;
76                         list_add(&mv_list->l, &adapter->vf_mvs.l);
77                         mv_list++;
78                 }
79         }
80
81         /* Initialize default switching mode VEB */
82         IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
83         adapter->bridge_mode = BRIDGE_MODE_VEB;
84
85         /* If call to enable VFs succeeded then allocate memory
86          * for per VF control structures.
87          */
88         adapter->vfinfo =
89                 kcalloc(adapter->num_vfs,
90                         sizeof(struct vf_data_storage), GFP_KERNEL);
91         if (adapter->vfinfo) {
92                 /* limit trafffic classes based on VFs enabled */
93                 if ((adapter->hw.mac.type == ixgbe_mac_82599EB) &&
94                     (adapter->num_vfs < 16)) {
95                         adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS;
96                         adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS;
97                 } else if (adapter->num_vfs < 32) {
98                         adapter->dcb_cfg.num_tcs.pg_tcs = 4;
99                         adapter->dcb_cfg.num_tcs.pfc_tcs = 4;
100                 } else {
101                         adapter->dcb_cfg.num_tcs.pg_tcs = 1;
102                         adapter->dcb_cfg.num_tcs.pfc_tcs = 1;
103                 }
104
105                 /* Disable RSC when in SR-IOV mode */
106                 adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE |
107                                      IXGBE_FLAG2_RSC_ENABLED);
108
109                 for (i = 0; i < adapter->num_vfs; i++) {
110                         /* enable spoof checking for all VFs */
111                         adapter->vfinfo[i].spoofchk_enabled = true;
112
113                         /* We support VF RSS querying only for 82599 and x540
114                          * devices at the moment. These devices share RSS
115                          * indirection table and RSS hash key with PF therefore
116                          * we want to disable the querying by default.
117                          */
118                         adapter->vfinfo[i].rss_query_enabled = 0;
119
120                         /* Untrust all VFs */
121                         adapter->vfinfo[i].trusted = false;
122
123                         /* set the default xcast mode */
124                         adapter->vfinfo[i].xcast_mode = IXGBEVF_XCAST_MODE_NONE;
125                 }
126
127                 return 0;
128         }
129
130         return -ENOMEM;
131 }
132
133 /**
134  * ixgbe_get_vfs - Find and take references to all vf devices
135  * @adapter: Pointer to adapter struct
136  */
137 static void ixgbe_get_vfs(struct ixgbe_adapter *adapter)
138 {
139         struct pci_dev *pdev = adapter->pdev;
140         u16 vendor = pdev->vendor;
141         struct pci_dev *vfdev;
142         int vf = 0;
143         u16 vf_id;
144         int pos;
145
146         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
147         if (!pos)
148                 return;
149         pci_read_config_word(pdev, pos + PCI_SRIOV_VF_DID, &vf_id);
150
151         vfdev = pci_get_device(vendor, vf_id, NULL);
152         for (; vfdev; vfdev = pci_get_device(vendor, vf_id, vfdev)) {
153                 if (!vfdev->is_virtfn)
154                         continue;
155                 if (vfdev->physfn != pdev)
156                         continue;
157                 if (vf >= adapter->num_vfs)
158                         continue;
159                 pci_dev_get(vfdev);
160                 adapter->vfinfo[vf].vfdev = vfdev;
161                 ++vf;
162         }
163 }
164
165 /* Note this function is called when the user wants to enable SR-IOV
166  * VFs using the now deprecated module parameter
167  */
168 void ixgbe_enable_sriov(struct ixgbe_adapter *adapter)
169 {
170         int pre_existing_vfs = 0;
171
172         pre_existing_vfs = pci_num_vf(adapter->pdev);
173         if (!pre_existing_vfs && !adapter->num_vfs)
174                 return;
175
176         /* If there are pre-existing VFs then we have to force
177          * use of that many - over ride any module parameter value.
178          * This may result from the user unloading the PF driver
179          * while VFs were assigned to guest VMs or because the VFs
180          * have been created via the new PCI SR-IOV sysfs interface.
181          */
182         if (pre_existing_vfs) {
183                 adapter->num_vfs = pre_existing_vfs;
184                 dev_warn(&adapter->pdev->dev,
185                          "Virtual Functions already enabled for this device - Please reload all VF drivers to avoid spoofed packet errors\n");
186         } else {
187                 int err;
188                 /*
189                  * The 82599 supports up to 64 VFs per physical function
190                  * but this implementation limits allocation to 63 so that
191                  * basic networking resources are still available to the
192                  * physical function.  If the user requests greater than
193                  * 63 VFs then it is an error - reset to default of zero.
194                  */
195                 adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, IXGBE_MAX_VFS_DRV_LIMIT);
196
197                 err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
198                 if (err) {
199                         e_err(probe, "Failed to enable PCI sriov: %d\n", err);
200                         adapter->num_vfs = 0;
201                         return;
202                 }
203         }
204
205         if (!__ixgbe_enable_sriov(adapter)) {
206                 ixgbe_get_vfs(adapter);
207                 return;
208         }
209
210         /* If we have gotten to this point then there is no memory available
211          * to manage the VF devices - print message and bail.
212          */
213         e_err(probe, "Unable to allocate memory for VF Data Storage - "
214               "SRIOV disabled\n");
215         ixgbe_disable_sriov(adapter);
216 }
217
218 #endif /* #ifdef CONFIG_PCI_IOV */
219 int ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
220 {
221         unsigned int num_vfs = adapter->num_vfs, vf;
222         struct ixgbe_hw *hw = &adapter->hw;
223         u32 gpie;
224         u32 vmdctl;
225         int rss;
226
227         /* set num VFs to 0 to prevent access to vfinfo */
228         adapter->num_vfs = 0;
229
230         /* put the reference to all of the vf devices */
231         for (vf = 0; vf < num_vfs; ++vf) {
232                 struct pci_dev *vfdev = adapter->vfinfo[vf].vfdev;
233
234                 if (!vfdev)
235                         continue;
236                 adapter->vfinfo[vf].vfdev = NULL;
237                 pci_dev_put(vfdev);
238         }
239
240         /* free VF control structures */
241         kfree(adapter->vfinfo);
242         adapter->vfinfo = NULL;
243
244         /* free macvlan list */
245         kfree(adapter->mv_list);
246         adapter->mv_list = NULL;
247
248         /* if SR-IOV is already disabled then there is nothing to do */
249         if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
250                 return 0;
251
252 #ifdef CONFIG_PCI_IOV
253         /*
254          * If our VFs are assigned we cannot shut down SR-IOV
255          * without causing issues, so just leave the hardware
256          * available but disabled
257          */
258         if (pci_vfs_assigned(adapter->pdev)) {
259                 e_dev_warn("Unloading driver while VFs are assigned - VFs will not be deallocated\n");
260                 return -EPERM;
261         }
262         /* disable iov and allow time for transactions to clear */
263         pci_disable_sriov(adapter->pdev);
264 #endif
265
266         /* turn off device IOV mode */
267         IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, 0);
268         gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
269         gpie &= ~IXGBE_GPIE_VTMODE_MASK;
270         IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
271
272         /* set default pool back to 0 */
273         vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
274         vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
275         IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
276         IXGBE_WRITE_FLUSH(hw);
277
278         /* Disable VMDq flag so device will be set in VM mode */
279         if (adapter->ring_feature[RING_F_VMDQ].limit == 1) {
280                 adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED;
281                 adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
282                 rss = min_t(int, ixgbe_max_rss_indices(adapter),
283                             num_online_cpus());
284         } else {
285                 rss = min_t(int, IXGBE_MAX_L2A_QUEUES, num_online_cpus());
286         }
287
288         adapter->ring_feature[RING_F_VMDQ].offset = 0;
289         adapter->ring_feature[RING_F_RSS].limit = rss;
290
291         /* take a breather then clean up driver data */
292         msleep(100);
293         return 0;
294 }
295
296 static int ixgbe_pci_sriov_enable(struct pci_dev *dev, int num_vfs)
297 {
298 #ifdef CONFIG_PCI_IOV
299         struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
300         int err = 0;
301         int i;
302         int pre_existing_vfs = pci_num_vf(dev);
303
304         if (pre_existing_vfs && pre_existing_vfs != num_vfs)
305                 err = ixgbe_disable_sriov(adapter);
306         else if (pre_existing_vfs && pre_existing_vfs == num_vfs)
307                 return num_vfs;
308
309         if (err)
310                 return err;
311
312         /* While the SR-IOV capability structure reports total VFs to be 64,
313          * we have to limit the actual number allocated based on two factors.
314          * First, we reserve some transmit/receive resources for the PF.
315          * Second, VMDQ also uses the same pools that SR-IOV does. We need to
316          * account for this, so that we don't accidentally allocate more VFs
317          * than we have available pools. The PCI bus driver already checks for
318          * other values out of range.
319          */
320         if ((num_vfs + adapter->num_rx_pools) > IXGBE_MAX_VF_FUNCTIONS)
321                 return -EPERM;
322
323         adapter->num_vfs = num_vfs;
324
325         err = __ixgbe_enable_sriov(adapter);
326         if (err)
327                 return  err;
328
329         for (i = 0; i < adapter->num_vfs; i++)
330                 ixgbe_vf_configuration(dev, (i | 0x10000000));
331
332         /* reset before enabling SRIOV to avoid mailbox issues */
333         ixgbe_sriov_reinit(adapter);
334
335         err = pci_enable_sriov(dev, num_vfs);
336         if (err) {
337                 e_dev_warn("Failed to enable PCI sriov: %d\n", err);
338                 return err;
339         }
340         ixgbe_get_vfs(adapter);
341
342         return num_vfs;
343 #else
344         return 0;
345 #endif
346 }
347
348 static int ixgbe_pci_sriov_disable(struct pci_dev *dev)
349 {
350         struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
351         int err;
352 #ifdef CONFIG_PCI_IOV
353         u32 current_flags = adapter->flags;
354 #endif
355
356         err = ixgbe_disable_sriov(adapter);
357
358         /* Only reinit if no error and state changed */
359 #ifdef CONFIG_PCI_IOV
360         if (!err && current_flags != adapter->flags)
361                 ixgbe_sriov_reinit(adapter);
362 #endif
363
364         return err;
365 }
366
367 int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
368 {
369         if (num_vfs == 0)
370                 return ixgbe_pci_sriov_disable(dev);
371         else
372                 return ixgbe_pci_sriov_enable(dev, num_vfs);
373 }
374
375 static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
376                                    u32 *msgbuf, u32 vf)
377 {
378         int entries = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
379                        >> IXGBE_VT_MSGINFO_SHIFT;
380         u16 *hash_list = (u16 *)&msgbuf[1];
381         struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
382         struct ixgbe_hw *hw = &adapter->hw;
383         int i;
384         u32 vector_bit;
385         u32 vector_reg;
386         u32 mta_reg;
387         u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
388
389         /* only so many hash values supported */
390         entries = min(entries, IXGBE_MAX_VF_MC_ENTRIES);
391
392         /*
393          * salt away the number of multi cast addresses assigned
394          * to this VF for later use to restore when the PF multi cast
395          * list changes
396          */
397         vfinfo->num_vf_mc_hashes = entries;
398
399         /*
400          * VFs are limited to using the MTA hash table for their multicast
401          * addresses
402          */
403         for (i = 0; i < entries; i++) {
404                 vfinfo->vf_mc_hashes[i] = hash_list[i];
405         }
406
407         for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) {
408                 vector_reg = (vfinfo->vf_mc_hashes[i] >> 5) & 0x7F;
409                 vector_bit = vfinfo->vf_mc_hashes[i] & 0x1F;
410                 mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
411                 mta_reg |= BIT(vector_bit);
412                 IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
413         }
414         vmolr |= IXGBE_VMOLR_ROMPE;
415         IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
416
417         return 0;
418 }
419
420 #ifdef CONFIG_PCI_IOV
421 void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
422 {
423         struct ixgbe_hw *hw = &adapter->hw;
424         struct vf_data_storage *vfinfo;
425         int i, j;
426         u32 vector_bit;
427         u32 vector_reg;
428         u32 mta_reg;
429
430         for (i = 0; i < adapter->num_vfs; i++) {
431                 u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(i));
432                 vfinfo = &adapter->vfinfo[i];
433                 for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) {
434                         hw->addr_ctrl.mta_in_use++;
435                         vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F;
436                         vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F;
437                         mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
438                         mta_reg |= BIT(vector_bit);
439                         IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
440                 }
441
442                 if (vfinfo->num_vf_mc_hashes)
443                         vmolr |= IXGBE_VMOLR_ROMPE;
444                 else
445                         vmolr &= ~IXGBE_VMOLR_ROMPE;
446                 IXGBE_WRITE_REG(hw, IXGBE_VMOLR(i), vmolr);
447         }
448
449         /* Restore any VF macvlans */
450         ixgbe_full_sync_mac_table(adapter);
451 }
452 #endif
453
454 static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
455                              u32 vf)
456 {
457         struct ixgbe_hw *hw = &adapter->hw;
458         int err;
459
460         /* If VLAN overlaps with one the PF is currently monitoring make
461          * sure that we are able to allocate a VLVF entry.  This may be
462          * redundant but it guarantees PF will maintain visibility to
463          * the VLAN.
464          */
465         if (add && test_bit(vid, adapter->active_vlans)) {
466                 err = hw->mac.ops.set_vfta(hw, vid, VMDQ_P(0), true, false);
467                 if (err)
468                         return err;
469         }
470
471         err = hw->mac.ops.set_vfta(hw, vid, vf, !!add, false);
472
473         if (add && !err)
474                 return err;
475
476         /* If we failed to add the VF VLAN or we are removing the VF VLAN
477          * we may need to drop the PF pool bit in order to allow us to free
478          * up the VLVF resources.
479          */
480         if (test_bit(vid, adapter->active_vlans) ||
481             (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC))
482                 ixgbe_update_pf_promisc_vlvf(adapter, vid);
483
484         return err;
485 }
486
487 static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
488 {
489         struct ixgbe_hw *hw = &adapter->hw;
490         int max_frame = msgbuf[1];
491         u32 max_frs;
492
493         /*
494          * For 82599EB we have to keep all PFs and VFs operating with
495          * the same max_frame value in order to avoid sending an oversize
496          * frame to a VF.  In order to guarantee this is handled correctly
497          * for all cases we have several special exceptions to take into
498          * account before we can enable the VF for receive
499          */
500         if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
501                 struct net_device *dev = adapter->netdev;
502                 int pf_max_frame = dev->mtu + ETH_HLEN;
503                 u32 reg_offset, vf_shift, vfre;
504                 s32 err = 0;
505
506 #ifdef CONFIG_FCOE
507                 if (dev->features & NETIF_F_FCOE_MTU)
508                         pf_max_frame = max_t(int, pf_max_frame,
509                                              IXGBE_FCOE_JUMBO_FRAME_SIZE);
510
511 #endif /* CONFIG_FCOE */
512                 switch (adapter->vfinfo[vf].vf_api) {
513                 case ixgbe_mbox_api_11:
514                 case ixgbe_mbox_api_12:
515                         /*
516                          * Version 1.1 supports jumbo frames on VFs if PF has
517                          * jumbo frames enabled which means legacy VFs are
518                          * disabled
519                          */
520                         if (pf_max_frame > ETH_FRAME_LEN)
521                                 break;
522                 default:
523                         /*
524                          * If the PF or VF are running w/ jumbo frames enabled
525                          * we need to shut down the VF Rx path as we cannot
526                          * support jumbo frames on legacy VFs
527                          */
528                         if ((pf_max_frame > ETH_FRAME_LEN) ||
529                             (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)))
530                                 err = -EINVAL;
531                         break;
532                 }
533
534                 /* determine VF receive enable location */
535                 vf_shift = vf % 32;
536                 reg_offset = vf / 32;
537
538                 /* enable or disable receive depending on error */
539                 vfre = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
540                 if (err)
541                         vfre &= ~BIT(vf_shift);
542                 else
543                         vfre |= BIT(vf_shift);
544                 IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), vfre);
545
546                 if (err) {
547                         e_err(drv, "VF max_frame %d out of range\n", max_frame);
548                         return err;
549                 }
550         }
551
552         /* MTU < 68 is an error and causes problems on some kernels */
553         if (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) {
554                 e_err(drv, "VF max_frame %d out of range\n", max_frame);
555                 return -EINVAL;
556         }
557
558         /* pull current max frame size from hardware */
559         max_frs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
560         max_frs &= IXGBE_MHADD_MFS_MASK;
561         max_frs >>= IXGBE_MHADD_MFS_SHIFT;
562
563         if (max_frs < max_frame) {
564                 max_frs = max_frame << IXGBE_MHADD_MFS_SHIFT;
565                 IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs);
566         }
567
568         e_info(hw, "VF requests change max MTU to %d\n", max_frame);
569
570         return 0;
571 }
572
573 static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe)
574 {
575         u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
576         vmolr |= IXGBE_VMOLR_BAM;
577         if (aupe)
578                 vmolr |= IXGBE_VMOLR_AUPE;
579         else
580                 vmolr &= ~IXGBE_VMOLR_AUPE;
581         IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
582 }
583
584 static void ixgbe_clear_vmvir(struct ixgbe_adapter *adapter, u32 vf)
585 {
586         struct ixgbe_hw *hw = &adapter->hw;
587
588         IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), 0);
589 }
590
591 static void ixgbe_clear_vf_vlans(struct ixgbe_adapter *adapter, u32 vf)
592 {
593         struct ixgbe_hw *hw = &adapter->hw;
594         u32 vlvfb_mask, pool_mask, i;
595
596         /* create mask for VF and other pools */
597         pool_mask = ~BIT(VMDQ_P(0) % 32);
598         vlvfb_mask = BIT(vf % 32);
599
600         /* post increment loop, covers VLVF_ENTRIES - 1 to 0 */
601         for (i = IXGBE_VLVF_ENTRIES; i--;) {
602                 u32 bits[2], vlvfb, vid, vfta, vlvf;
603                 u32 word = i * 2 + vf / 32;
604                 u32 mask;
605
606                 vlvfb = IXGBE_READ_REG(hw, IXGBE_VLVFB(word));
607
608                 /* if our bit isn't set we can skip it */
609                 if (!(vlvfb & vlvfb_mask))
610                         continue;
611
612                 /* clear our bit from vlvfb */
613                 vlvfb ^= vlvfb_mask;
614
615                 /* create 64b mask to chedk to see if we should clear VLVF */
616                 bits[word % 2] = vlvfb;
617                 bits[~word % 2] = IXGBE_READ_REG(hw, IXGBE_VLVFB(word ^ 1));
618
619                 /* if other pools are present, just remove ourselves */
620                 if (bits[(VMDQ_P(0) / 32) ^ 1] ||
621                     (bits[VMDQ_P(0) / 32] & pool_mask))
622                         goto update_vlvfb;
623
624                 /* if PF is present, leave VFTA */
625                 if (bits[0] || bits[1])
626                         goto update_vlvf;
627
628                 /* if we cannot determine VLAN just remove ourselves */
629                 vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(i));
630                 if (!vlvf)
631                         goto update_vlvfb;
632
633                 vid = vlvf & VLAN_VID_MASK;
634                 mask = BIT(vid % 32);
635
636                 /* clear bit from VFTA */
637                 vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(vid / 32));
638                 if (vfta & mask)
639                         IXGBE_WRITE_REG(hw, IXGBE_VFTA(vid / 32), vfta ^ mask);
640 update_vlvf:
641                 /* clear POOL selection enable */
642                 IXGBE_WRITE_REG(hw, IXGBE_VLVF(i), 0);
643
644                 if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC))
645                         vlvfb = 0;
646 update_vlvfb:
647                 /* clear pool bits */
648                 IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), vlvfb);
649         }
650 }
651
652 static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
653 {
654         struct ixgbe_hw *hw = &adapter->hw;
655         struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
656         u8 num_tcs = netdev_get_num_tc(adapter->netdev);
657
658         /* remove VLAN filters beloning to this VF */
659         ixgbe_clear_vf_vlans(adapter, vf);
660
661         /* add back PF assigned VLAN or VLAN 0 */
662         ixgbe_set_vf_vlan(adapter, true, vfinfo->pf_vlan, vf);
663
664         /* reset offloads to defaults */
665         ixgbe_set_vmolr(hw, vf, !vfinfo->pf_vlan);
666
667         /* set outgoing tags for VFs */
668         if (!vfinfo->pf_vlan && !vfinfo->pf_qos && !num_tcs) {
669                 ixgbe_clear_vmvir(adapter, vf);
670         } else {
671                 if (vfinfo->pf_qos || !num_tcs)
672                         ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
673                                         vfinfo->pf_qos, vf);
674                 else
675                         ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
676                                         adapter->default_up, vf);
677
678                 if (vfinfo->spoofchk_enabled)
679                         hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
680         }
681
682         /* reset multicast table array for vf */
683         adapter->vfinfo[vf].num_vf_mc_hashes = 0;
684
685         /* Flush and reset the mta with the new values */
686         ixgbe_set_rx_mode(adapter->netdev);
687
688         ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
689
690         /* reset VF api back to unknown */
691         adapter->vfinfo[vf].vf_api = ixgbe_mbox_api_10;
692 }
693
694 static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
695                             int vf, unsigned char *mac_addr)
696 {
697         ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
698         memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
699         ixgbe_add_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
700
701         return 0;
702 }
703
704 static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
705                                 int vf, int index, unsigned char *mac_addr)
706 {
707         struct list_head *pos;
708         struct vf_macvlans *entry;
709
710         if (index <= 1) {
711                 list_for_each(pos, &adapter->vf_mvs.l) {
712                         entry = list_entry(pos, struct vf_macvlans, l);
713                         if (entry->vf == vf) {
714                                 entry->vf = -1;
715                                 entry->free = true;
716                                 entry->is_macvlan = false;
717                                 ixgbe_del_mac_filter(adapter,
718                                                      entry->vf_macvlan, vf);
719                         }
720                 }
721         }
722
723         /*
724          * If index was zero then we were asked to clear the uc list
725          * for the VF.  We're done.
726          */
727         if (!index)
728                 return 0;
729
730         entry = NULL;
731
732         list_for_each(pos, &adapter->vf_mvs.l) {
733                 entry = list_entry(pos, struct vf_macvlans, l);
734                 if (entry->free)
735                         break;
736         }
737
738         /*
739          * If we traversed the entire list and didn't find a free entry
740          * then we're out of space on the RAR table.  Also entry may
741          * be NULL because the original memory allocation for the list
742          * failed, which is not fatal but does mean we can't support
743          * VF requests for MACVLAN because we couldn't allocate
744          * memory for the list management required.
745          */
746         if (!entry || !entry->free)
747                 return -ENOSPC;
748
749         entry->free = false;
750         entry->is_macvlan = true;
751         entry->vf = vf;
752         memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
753
754         ixgbe_add_mac_filter(adapter, mac_addr, vf);
755
756         return 0;
757 }
758
759 int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
760 {
761         struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
762         unsigned int vfn = (event_mask & 0x3f);
763
764         bool enable = ((event_mask & 0x10000000U) != 0);
765
766         if (enable)
767                 eth_zero_addr(adapter->vfinfo[vfn].vf_mac_addresses);
768
769         return 0;
770 }
771
772 static inline void ixgbe_write_qde(struct ixgbe_adapter *adapter, u32 vf,
773                                    u32 qde)
774 {
775         struct ixgbe_hw *hw = &adapter->hw;
776         struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
777         u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
778         int i;
779
780         for (i = vf * q_per_pool; i < ((vf + 1) * q_per_pool); i++) {
781                 u32 reg;
782
783                 /* flush previous write */
784                 IXGBE_WRITE_FLUSH(hw);
785
786                 /* indicate to hardware that we want to set drop enable */
787                 reg = IXGBE_QDE_WRITE | IXGBE_QDE_ENABLE;
788                 reg |= i <<  IXGBE_QDE_IDX_SHIFT;
789                 IXGBE_WRITE_REG(hw, IXGBE_QDE, reg);
790         }
791 }
792
793 static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
794 {
795         struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
796         struct ixgbe_hw *hw = &adapter->hw;
797         unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
798         u32 reg, reg_offset, vf_shift;
799         u32 msgbuf[4] = {0, 0, 0, 0};
800         u8 *addr = (u8 *)(&msgbuf[1]);
801         u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
802         int i;
803
804         e_info(probe, "VF Reset msg received from vf %d\n", vf);
805
806         /* reset the filters for the device */
807         ixgbe_vf_reset_event(adapter, vf);
808
809         /* set vf mac address */
810         if (!is_zero_ether_addr(vf_mac))
811                 ixgbe_set_vf_mac(adapter, vf, vf_mac);
812
813         vf_shift = vf % 32;
814         reg_offset = vf / 32;
815
816         /* enable transmit for vf */
817         reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset));
818         reg |= BIT(vf_shift);
819         IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg);
820
821         /* force drop enable for all VF Rx queues */
822         ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE);
823
824         /* enable receive for vf */
825         reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
826         reg |= BIT(vf_shift);
827         /*
828          * The 82599 cannot support a mix of jumbo and non-jumbo PF/VFs.
829          * For more info take a look at ixgbe_set_vf_lpe
830          */
831         if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
832                 struct net_device *dev = adapter->netdev;
833                 int pf_max_frame = dev->mtu + ETH_HLEN;
834
835 #ifdef CONFIG_FCOE
836                 if (dev->features & NETIF_F_FCOE_MTU)
837                         pf_max_frame = max_t(int, pf_max_frame,
838                                              IXGBE_FCOE_JUMBO_FRAME_SIZE);
839
840 #endif /* CONFIG_FCOE */
841                 if (pf_max_frame > ETH_FRAME_LEN)
842                         reg &= ~BIT(vf_shift);
843         }
844         IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg);
845
846         /* enable VF mailbox for further messages */
847         adapter->vfinfo[vf].clear_to_send = true;
848
849         /* Enable counting of spoofed packets in the SSVPC register */
850         reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset));
851         reg |= BIT(vf_shift);
852         IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg);
853
854         /*
855          * Reset the VFs TDWBAL and TDWBAH registers
856          * which are not cleared by an FLR
857          */
858         for (i = 0; i < q_per_pool; i++) {
859                 IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBAHn(q_per_pool, vf, i), 0);
860                 IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBALn(q_per_pool, vf, i), 0);
861         }
862
863         /* reply to reset with ack and vf mac address */
864         msgbuf[0] = IXGBE_VF_RESET;
865         if (!is_zero_ether_addr(vf_mac)) {
866                 msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
867                 memcpy(addr, vf_mac, ETH_ALEN);
868         } else {
869                 msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
870                 dev_warn(&adapter->pdev->dev,
871                          "VF %d has no MAC address assigned, you may have to assign one manually\n",
872                          vf);
873         }
874
875         /*
876          * Piggyback the multicast filter type so VF can compute the
877          * correct vectors
878          */
879         msgbuf[3] = hw->mac.mc_filter_type;
880         ixgbe_write_mbx(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN, vf);
881
882         return 0;
883 }
884
885 static int ixgbe_set_vf_mac_addr(struct ixgbe_adapter *adapter,
886                                  u32 *msgbuf, u32 vf)
887 {
888         u8 *new_mac = ((u8 *)(&msgbuf[1]));
889
890         if (!is_valid_ether_addr(new_mac)) {
891                 e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
892                 return -1;
893         }
894
895         if (adapter->vfinfo[vf].pf_set_mac && !adapter->vfinfo[vf].trusted &&
896             !ether_addr_equal(adapter->vfinfo[vf].vf_mac_addresses, new_mac)) {
897                 e_warn(drv,
898                        "VF %d attempted to override administratively set MAC address\n"
899                        "Reload the VF driver to resume operations\n",
900                        vf);
901                 return -1;
902         }
903
904         return ixgbe_set_vf_mac(adapter, vf, new_mac) < 0;
905 }
906
907 static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter,
908                                  u32 *msgbuf, u32 vf)
909 {
910         u32 add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> IXGBE_VT_MSGINFO_SHIFT;
911         u32 vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK);
912         u8 tcs = netdev_get_num_tc(adapter->netdev);
913
914         if (adapter->vfinfo[vf].pf_vlan || tcs) {
915                 e_warn(drv,
916                        "VF %d attempted to override administratively set VLAN configuration\n"
917                        "Reload the VF driver to resume operations\n",
918                        vf);
919                 return -1;
920         }
921
922         /* VLAN 0 is a special case, don't allow it to be removed */
923         if (!vid && !add)
924                 return 0;
925
926         return ixgbe_set_vf_vlan(adapter, add, vid, vf);
927 }
928
929 static int ixgbe_set_vf_macvlan_msg(struct ixgbe_adapter *adapter,
930                                     u32 *msgbuf, u32 vf)
931 {
932         u8 *new_mac = ((u8 *)(&msgbuf[1]));
933         int index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >>
934                     IXGBE_VT_MSGINFO_SHIFT;
935         int err;
936
937         if (adapter->vfinfo[vf].pf_set_mac && index > 0) {
938                 e_warn(drv,
939                        "VF %d requested MACVLAN filter but is administratively denied\n",
940                        vf);
941                 return -1;
942         }
943
944         /* An non-zero index indicates the VF is setting a filter */
945         if (index) {
946                 if (!is_valid_ether_addr(new_mac)) {
947                         e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
948                         return -1;
949                 }
950
951                 /*
952                  * If the VF is allowed to set MAC filters then turn off
953                  * anti-spoofing to avoid false positives.
954                  */
955                 if (adapter->vfinfo[vf].spoofchk_enabled) {
956                         struct ixgbe_hw *hw = &adapter->hw;
957
958                         hw->mac.ops.set_mac_anti_spoofing(hw, false, vf);
959                         hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
960                 }
961         }
962
963         err = ixgbe_set_vf_macvlan(adapter, vf, index, new_mac);
964         if (err == -ENOSPC)
965                 e_warn(drv,
966                        "VF %d has requested a MACVLAN filter but there is no space for it\n",
967                        vf);
968
969         return err < 0;
970 }
971
972 static int ixgbe_negotiate_vf_api(struct ixgbe_adapter *adapter,
973                                   u32 *msgbuf, u32 vf)
974 {
975         int api = msgbuf[1];
976
977         switch (api) {
978         case ixgbe_mbox_api_10:
979         case ixgbe_mbox_api_11:
980         case ixgbe_mbox_api_12:
981                 adapter->vfinfo[vf].vf_api = api;
982                 return 0;
983         default:
984                 break;
985         }
986
987         e_info(drv, "VF %d requested invalid api version %u\n", vf, api);
988
989         return -1;
990 }
991
992 static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter,
993                                u32 *msgbuf, u32 vf)
994 {
995         struct net_device *dev = adapter->netdev;
996         struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
997         unsigned int default_tc = 0;
998         u8 num_tcs = netdev_get_num_tc(dev);
999
1000         /* verify the PF is supporting the correct APIs */
1001         switch (adapter->vfinfo[vf].vf_api) {
1002         case ixgbe_mbox_api_20:
1003         case ixgbe_mbox_api_11:
1004         case ixgbe_mbox_api_12:
1005                 break;
1006         default:
1007                 return -1;
1008         }
1009
1010         /* only allow 1 Tx queue for bandwidth limiting */
1011         msgbuf[IXGBE_VF_TX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
1012         msgbuf[IXGBE_VF_RX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
1013
1014         /* if TCs > 1 determine which TC belongs to default user priority */
1015         if (num_tcs > 1)
1016                 default_tc = netdev_get_prio_tc_map(dev, adapter->default_up);
1017
1018         /* notify VF of need for VLAN tag stripping, and correct queue */
1019         if (num_tcs)
1020                 msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
1021         else if (adapter->vfinfo[vf].pf_vlan || adapter->vfinfo[vf].pf_qos)
1022                 msgbuf[IXGBE_VF_TRANS_VLAN] = 1;
1023         else
1024                 msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
1025
1026         /* notify VF of default queue */
1027         msgbuf[IXGBE_VF_DEF_QUEUE] = default_tc;
1028
1029         return 0;
1030 }
1031
1032 static int ixgbe_get_vf_reta(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
1033 {
1034         u32 i, j;
1035         u32 *out_buf = &msgbuf[1];
1036         const u8 *reta = adapter->rss_indir_tbl;
1037         u32 reta_size = ixgbe_rss_indir_tbl_entries(adapter);
1038
1039         /* Check if operation is permitted */
1040         if (!adapter->vfinfo[vf].rss_query_enabled)
1041                 return -EPERM;
1042
1043         /* verify the PF is supporting the correct API */
1044         if (adapter->vfinfo[vf].vf_api != ixgbe_mbox_api_12)
1045                 return -EOPNOTSUPP;
1046
1047         /* This mailbox command is supported (required) only for 82599 and x540
1048          * VFs which support up to 4 RSS queues. Therefore we will compress the
1049          * RETA by saving only 2 bits from each entry. This way we will be able
1050          * to transfer the whole RETA in a single mailbox operation.
1051          */
1052         for (i = 0; i < reta_size / 16; i++) {
1053                 out_buf[i] = 0;
1054                 for (j = 0; j < 16; j++)
1055                         out_buf[i] |= (u32)(reta[16 * i + j] & 0x3) << (2 * j);
1056         }
1057
1058         return 0;
1059 }
1060
1061 static int ixgbe_get_vf_rss_key(struct ixgbe_adapter *adapter,
1062                                 u32 *msgbuf, u32 vf)
1063 {
1064         u32 *rss_key = &msgbuf[1];
1065
1066         /* Check if the operation is permitted */
1067         if (!adapter->vfinfo[vf].rss_query_enabled)
1068                 return -EPERM;
1069
1070         /* verify the PF is supporting the correct API */
1071         if (adapter->vfinfo[vf].vf_api != ixgbe_mbox_api_12)
1072                 return -EOPNOTSUPP;
1073
1074         memcpy(rss_key, adapter->rss_key, sizeof(adapter->rss_key));
1075
1076         return 0;
1077 }
1078
1079 static int ixgbe_update_vf_xcast_mode(struct ixgbe_adapter *adapter,
1080                                       u32 *msgbuf, u32 vf)
1081 {
1082         struct ixgbe_hw *hw = &adapter->hw;
1083         int xcast_mode = msgbuf[1];
1084         u32 vmolr, disable, enable;
1085
1086         /* verify the PF is supporting the correct APIs */
1087         switch (adapter->vfinfo[vf].vf_api) {
1088         case ixgbe_mbox_api_12:
1089                 break;
1090         default:
1091                 return -EOPNOTSUPP;
1092         }
1093
1094         if (xcast_mode > IXGBEVF_XCAST_MODE_MULTI &&
1095             !adapter->vfinfo[vf].trusted) {
1096                 xcast_mode = IXGBEVF_XCAST_MODE_MULTI;
1097         }
1098
1099         if (adapter->vfinfo[vf].xcast_mode == xcast_mode)
1100                 goto out;
1101
1102         switch (xcast_mode) {
1103         case IXGBEVF_XCAST_MODE_NONE:
1104                 disable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE | IXGBE_VMOLR_MPE;
1105                 enable = 0;
1106                 break;
1107         case IXGBEVF_XCAST_MODE_MULTI:
1108                 disable = IXGBE_VMOLR_MPE;
1109                 enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE;
1110                 break;
1111         case IXGBEVF_XCAST_MODE_ALLMULTI:
1112                 disable = 0;
1113                 enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE | IXGBE_VMOLR_MPE;
1114                 break;
1115         default:
1116                 return -EOPNOTSUPP;
1117         }
1118
1119         vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
1120         vmolr &= ~disable;
1121         vmolr |= enable;
1122         IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
1123
1124         adapter->vfinfo[vf].xcast_mode = xcast_mode;
1125
1126 out:
1127         msgbuf[1] = xcast_mode;
1128
1129         return 0;
1130 }
1131
1132 static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
1133 {
1134         u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
1135         u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
1136         struct ixgbe_hw *hw = &adapter->hw;
1137         s32 retval;
1138
1139         retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
1140
1141         if (retval) {
1142                 pr_err("Error receiving message from VF\n");
1143                 return retval;
1144         }
1145
1146         /* this is a message we already processed, do nothing */
1147         if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK))
1148                 return 0;
1149
1150         /* flush the ack before we write any messages back */
1151         IXGBE_WRITE_FLUSH(hw);
1152
1153         if (msgbuf[0] == IXGBE_VF_RESET)
1154                 return ixgbe_vf_reset_msg(adapter, vf);
1155
1156         /*
1157          * until the vf completes a virtual function reset it should not be
1158          * allowed to start any configuration.
1159          */
1160         if (!adapter->vfinfo[vf].clear_to_send) {
1161                 msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
1162                 ixgbe_write_mbx(hw, msgbuf, 1, vf);
1163                 return 0;
1164         }
1165
1166         switch ((msgbuf[0] & 0xFFFF)) {
1167         case IXGBE_VF_SET_MAC_ADDR:
1168                 retval = ixgbe_set_vf_mac_addr(adapter, msgbuf, vf);
1169                 break;
1170         case IXGBE_VF_SET_MULTICAST:
1171                 retval = ixgbe_set_vf_multicasts(adapter, msgbuf, vf);
1172                 break;
1173         case IXGBE_VF_SET_VLAN:
1174                 retval = ixgbe_set_vf_vlan_msg(adapter, msgbuf, vf);
1175                 break;
1176         case IXGBE_VF_SET_LPE:
1177                 retval = ixgbe_set_vf_lpe(adapter, msgbuf, vf);
1178                 break;
1179         case IXGBE_VF_SET_MACVLAN:
1180                 retval = ixgbe_set_vf_macvlan_msg(adapter, msgbuf, vf);
1181                 break;
1182         case IXGBE_VF_API_NEGOTIATE:
1183                 retval = ixgbe_negotiate_vf_api(adapter, msgbuf, vf);
1184                 break;
1185         case IXGBE_VF_GET_QUEUES:
1186                 retval = ixgbe_get_vf_queues(adapter, msgbuf, vf);
1187                 break;
1188         case IXGBE_VF_GET_RETA:
1189                 retval = ixgbe_get_vf_reta(adapter, msgbuf, vf);
1190                 break;
1191         case IXGBE_VF_GET_RSS_KEY:
1192                 retval = ixgbe_get_vf_rss_key(adapter, msgbuf, vf);
1193                 break;
1194         case IXGBE_VF_UPDATE_XCAST_MODE:
1195                 retval = ixgbe_update_vf_xcast_mode(adapter, msgbuf, vf);
1196                 break;
1197         default:
1198                 e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
1199                 retval = IXGBE_ERR_MBX;
1200                 break;
1201         }
1202
1203         /* notify the VF of the results of what it sent us */
1204         if (retval)
1205                 msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
1206         else
1207                 msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
1208
1209         msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
1210
1211         ixgbe_write_mbx(hw, msgbuf, mbx_size, vf);
1212
1213         return retval;
1214 }
1215
1216 static void ixgbe_rcv_ack_from_vf(struct ixgbe_adapter *adapter, u32 vf)
1217 {
1218         struct ixgbe_hw *hw = &adapter->hw;
1219         u32 msg = IXGBE_VT_MSGTYPE_NACK;
1220
1221         /* if device isn't clear to send it shouldn't be reading either */
1222         if (!adapter->vfinfo[vf].clear_to_send)
1223                 ixgbe_write_mbx(hw, &msg, 1, vf);
1224 }
1225
1226 void ixgbe_msg_task(struct ixgbe_adapter *adapter)
1227 {
1228         struct ixgbe_hw *hw = &adapter->hw;
1229         u32 vf;
1230
1231         for (vf = 0; vf < adapter->num_vfs; vf++) {
1232                 /* process any reset requests */
1233                 if (!ixgbe_check_for_rst(hw, vf))
1234                         ixgbe_vf_reset_event(adapter, vf);
1235
1236                 /* process any messages pending */
1237                 if (!ixgbe_check_for_msg(hw, vf))
1238                         ixgbe_rcv_msg_from_vf(adapter, vf);
1239
1240                 /* process any acks */
1241                 if (!ixgbe_check_for_ack(hw, vf))
1242                         ixgbe_rcv_ack_from_vf(adapter, vf);
1243         }
1244 }
1245
1246 void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter)
1247 {
1248         struct ixgbe_hw *hw = &adapter->hw;
1249
1250         /* disable transmit and receive for all vfs */
1251         IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0);
1252         IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0);
1253
1254         IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0);
1255         IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0);
1256 }
1257
1258 static inline void ixgbe_ping_vf(struct ixgbe_adapter *adapter, int vf)
1259 {
1260         struct ixgbe_hw *hw = &adapter->hw;
1261         u32 ping;
1262
1263         ping = IXGBE_PF_CONTROL_MSG;
1264         if (adapter->vfinfo[vf].clear_to_send)
1265                 ping |= IXGBE_VT_MSGTYPE_CTS;
1266         ixgbe_write_mbx(hw, &ping, 1, vf);
1267 }
1268
1269 void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter)
1270 {
1271         struct ixgbe_hw *hw = &adapter->hw;
1272         u32 ping;
1273         int i;
1274
1275         for (i = 0 ; i < adapter->num_vfs; i++) {
1276                 ping = IXGBE_PF_CONTROL_MSG;
1277                 if (adapter->vfinfo[i].clear_to_send)
1278                         ping |= IXGBE_VT_MSGTYPE_CTS;
1279                 ixgbe_write_mbx(hw, &ping, 1, i);
1280         }
1281 }
1282
1283 int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
1284 {
1285         struct ixgbe_adapter *adapter = netdev_priv(netdev);
1286         if (!is_valid_ether_addr(mac) || (vf >= adapter->num_vfs))
1287                 return -EINVAL;
1288         adapter->vfinfo[vf].pf_set_mac = true;
1289         dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
1290         dev_info(&adapter->pdev->dev, "Reload the VF driver to make this"
1291                                       " change effective.");
1292         if (test_bit(__IXGBE_DOWN, &adapter->state)) {
1293                 dev_warn(&adapter->pdev->dev, "The VF MAC address has been set,"
1294                          " but the PF device is not up.\n");
1295                 dev_warn(&adapter->pdev->dev, "Bring the PF device up before"
1296                          " attempting to use the VF device.\n");
1297         }
1298         return ixgbe_set_vf_mac(adapter, vf, mac);
1299 }
1300
1301 static int ixgbe_enable_port_vlan(struct ixgbe_adapter *adapter, int vf,
1302                                   u16 vlan, u8 qos)
1303 {
1304         struct ixgbe_hw *hw = &adapter->hw;
1305         int err;
1306
1307         err = ixgbe_set_vf_vlan(adapter, true, vlan, vf);
1308         if (err)
1309                 goto out;
1310
1311         /* Revoke tagless access via VLAN 0 */
1312         ixgbe_set_vf_vlan(adapter, false, 0, vf);
1313
1314         ixgbe_set_vmvir(adapter, vlan, qos, vf);
1315         ixgbe_set_vmolr(hw, vf, false);
1316
1317         /* enable hide vlan on X550 */
1318         if (hw->mac.type >= ixgbe_mac_X550)
1319                 ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE |
1320                                 IXGBE_QDE_HIDE_VLAN);
1321
1322         adapter->vfinfo[vf].pf_vlan = vlan;
1323         adapter->vfinfo[vf].pf_qos = qos;
1324         dev_info(&adapter->pdev->dev,
1325                  "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
1326         if (test_bit(__IXGBE_DOWN, &adapter->state)) {
1327                 dev_warn(&adapter->pdev->dev,
1328                          "The VF VLAN has been set, but the PF device is not up.\n");
1329                 dev_warn(&adapter->pdev->dev,
1330                          "Bring the PF device up before attempting to use the VF device.\n");
1331         }
1332
1333 out:
1334         return err;
1335 }
1336
1337 static int ixgbe_disable_port_vlan(struct ixgbe_adapter *adapter, int vf)
1338 {
1339         struct ixgbe_hw *hw = &adapter->hw;
1340         int err;
1341
1342         err = ixgbe_set_vf_vlan(adapter, false,
1343                                 adapter->vfinfo[vf].pf_vlan, vf);
1344         /* Restore tagless access via VLAN 0 */
1345         ixgbe_set_vf_vlan(adapter, true, 0, vf);
1346         ixgbe_clear_vmvir(adapter, vf);
1347         ixgbe_set_vmolr(hw, vf, true);
1348
1349         /* disable hide VLAN on X550 */
1350         if (hw->mac.type >= ixgbe_mac_X550)
1351                 ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE);
1352
1353         adapter->vfinfo[vf].pf_vlan = 0;
1354         adapter->vfinfo[vf].pf_qos = 0;
1355
1356         return err;
1357 }
1358
1359 int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan,
1360                           u8 qos, __be16 vlan_proto)
1361 {
1362         int err = 0;
1363         struct ixgbe_adapter *adapter = netdev_priv(netdev);
1364
1365         if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7))
1366                 return -EINVAL;
1367         if (vlan_proto != htons(ETH_P_8021Q))
1368                 return -EPROTONOSUPPORT;
1369         if (vlan || qos) {
1370                 /* Check if there is already a port VLAN set, if so
1371                  * we have to delete the old one first before we
1372                  * can set the new one.  The usage model had
1373                  * previously assumed the user would delete the
1374                  * old port VLAN before setting a new one but this
1375                  * is not necessarily the case.
1376                  */
1377                 if (adapter->vfinfo[vf].pf_vlan)
1378                         err = ixgbe_disable_port_vlan(adapter, vf);
1379                 if (err)
1380                         goto out;
1381                 err = ixgbe_enable_port_vlan(adapter, vf, vlan, qos);
1382         } else {
1383                 err = ixgbe_disable_port_vlan(adapter, vf);
1384         }
1385
1386 out:
1387         return err;
1388 }
1389
1390 int ixgbe_link_mbps(struct ixgbe_adapter *adapter)
1391 {
1392         switch (adapter->link_speed) {
1393         case IXGBE_LINK_SPEED_100_FULL:
1394                 return 100;
1395         case IXGBE_LINK_SPEED_1GB_FULL:
1396                 return 1000;
1397         case IXGBE_LINK_SPEED_10GB_FULL:
1398                 return 10000;
1399         default:
1400                 return 0;
1401         }
1402 }
1403
1404 static void ixgbe_set_vf_rate_limit(struct ixgbe_adapter *adapter, int vf)
1405 {
1406         struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
1407         struct ixgbe_hw *hw = &adapter->hw;
1408         u32 bcnrc_val = 0;
1409         u16 queue, queues_per_pool;
1410         u16 tx_rate = adapter->vfinfo[vf].tx_rate;
1411
1412         if (tx_rate) {
1413                 /* start with base link speed value */
1414                 bcnrc_val = adapter->vf_rate_link_speed;
1415
1416                 /* Calculate the rate factor values to set */
1417                 bcnrc_val <<= IXGBE_RTTBCNRC_RF_INT_SHIFT;
1418                 bcnrc_val /= tx_rate;
1419
1420                 /* clear everything but the rate factor */
1421                 bcnrc_val &= IXGBE_RTTBCNRC_RF_INT_MASK |
1422                              IXGBE_RTTBCNRC_RF_DEC_MASK;
1423
1424                 /* enable the rate scheduler */
1425                 bcnrc_val |= IXGBE_RTTBCNRC_RS_ENA;
1426         }
1427
1428         /*
1429          * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
1430          * register. Typically MMW_SIZE=0x014 if 9728-byte jumbo is supported
1431          * and 0x004 otherwise.
1432          */
1433         switch (hw->mac.type) {
1434         case ixgbe_mac_82599EB:
1435                 IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x4);
1436                 break;
1437         case ixgbe_mac_X540:
1438                 IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x14);
1439                 break;
1440         default:
1441                 break;
1442         }
1443
1444         /* determine how many queues per pool based on VMDq mask */
1445         queues_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
1446
1447         /* write value for all Tx queues belonging to VF */
1448         for (queue = 0; queue < queues_per_pool; queue++) {
1449                 unsigned int reg_idx = (vf * queues_per_pool) + queue;
1450
1451                 IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, reg_idx);
1452                 IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, bcnrc_val);
1453         }
1454 }
1455
1456 void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter)
1457 {
1458         int i;
1459
1460         /* VF Tx rate limit was not set */
1461         if (!adapter->vf_rate_link_speed)
1462                 return;
1463
1464         if (ixgbe_link_mbps(adapter) != adapter->vf_rate_link_speed) {
1465                 adapter->vf_rate_link_speed = 0;
1466                 dev_info(&adapter->pdev->dev,
1467                          "Link speed has been changed. VF Transmit rate is disabled\n");
1468         }
1469
1470         for (i = 0; i < adapter->num_vfs; i++) {
1471                 if (!adapter->vf_rate_link_speed)
1472                         adapter->vfinfo[i].tx_rate = 0;
1473
1474                 ixgbe_set_vf_rate_limit(adapter, i);
1475         }
1476 }
1477
1478 int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
1479                         int max_tx_rate)
1480 {
1481         struct ixgbe_adapter *adapter = netdev_priv(netdev);
1482         int link_speed;
1483
1484         /* verify VF is active */
1485         if (vf >= adapter->num_vfs)
1486                 return -EINVAL;
1487
1488         /* verify link is up */
1489         if (!adapter->link_up)
1490                 return -EINVAL;
1491
1492         /* verify we are linked at 10Gbps */
1493         link_speed = ixgbe_link_mbps(adapter);
1494         if (link_speed != 10000)
1495                 return -EINVAL;
1496
1497         if (min_tx_rate)
1498                 return -EINVAL;
1499
1500         /* rate limit cannot be less than 10Mbs or greater than link speed */
1501         if (max_tx_rate && ((max_tx_rate <= 10) || (max_tx_rate > link_speed)))
1502                 return -EINVAL;
1503
1504         /* store values */
1505         adapter->vf_rate_link_speed = link_speed;
1506         adapter->vfinfo[vf].tx_rate = max_tx_rate;
1507
1508         /* update hardware configuration */
1509         ixgbe_set_vf_rate_limit(adapter, vf);
1510
1511         return 0;
1512 }
1513
1514 int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting)
1515 {
1516         struct ixgbe_adapter *adapter = netdev_priv(netdev);
1517         struct ixgbe_hw *hw = &adapter->hw;
1518
1519         if (vf >= adapter->num_vfs)
1520                 return -EINVAL;
1521
1522         adapter->vfinfo[vf].spoofchk_enabled = setting;
1523
1524         /* configure MAC spoofing */
1525         hw->mac.ops.set_mac_anti_spoofing(hw, setting, vf);
1526
1527         /* configure VLAN spoofing */
1528         hw->mac.ops.set_vlan_anti_spoofing(hw, setting, vf);
1529
1530         /* Ensure LLDP and FC is set for Ethertype Antispoofing if we will be
1531          * calling set_ethertype_anti_spoofing for each VF in loop below
1532          */
1533         if (hw->mac.ops.set_ethertype_anti_spoofing) {
1534                 IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_LLDP),
1535                                 (IXGBE_ETQF_FILTER_EN    |
1536                                  IXGBE_ETQF_TX_ANTISPOOF |
1537                                  IXGBE_ETH_P_LLDP));
1538
1539                 IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FC),
1540                                 (IXGBE_ETQF_FILTER_EN |
1541                                  IXGBE_ETQF_TX_ANTISPOOF |
1542                                  ETH_P_PAUSE));
1543
1544                 hw->mac.ops.set_ethertype_anti_spoofing(hw, setting, vf);
1545         }
1546
1547         return 0;
1548 }
1549
1550 int ixgbe_ndo_set_vf_rss_query_en(struct net_device *netdev, int vf,
1551                                   bool setting)
1552 {
1553         struct ixgbe_adapter *adapter = netdev_priv(netdev);
1554
1555         /* This operation is currently supported only for 82599 and x540
1556          * devices.
1557          */
1558         if (adapter->hw.mac.type < ixgbe_mac_82599EB ||
1559             adapter->hw.mac.type >= ixgbe_mac_X550)
1560                 return -EOPNOTSUPP;
1561
1562         if (vf >= adapter->num_vfs)
1563                 return -EINVAL;
1564
1565         adapter->vfinfo[vf].rss_query_enabled = setting;
1566
1567         return 0;
1568 }
1569
1570 int ixgbe_ndo_set_vf_trust(struct net_device *netdev, int vf, bool setting)
1571 {
1572         struct ixgbe_adapter *adapter = netdev_priv(netdev);
1573
1574         if (vf >= adapter->num_vfs)
1575                 return -EINVAL;
1576
1577         /* nothing to do */
1578         if (adapter->vfinfo[vf].trusted == setting)
1579                 return 0;
1580
1581         adapter->vfinfo[vf].trusted = setting;
1582
1583         /* reset VF to reconfigure features */
1584         adapter->vfinfo[vf].clear_to_send = false;
1585         ixgbe_ping_vf(adapter, vf);
1586
1587         e_info(drv, "VF %u is %strusted\n", vf, setting ? "" : "not ");
1588
1589         return 0;
1590 }
1591
1592 int ixgbe_ndo_get_vf_config(struct net_device *netdev,
1593                             int vf, struct ifla_vf_info *ivi)
1594 {
1595         struct ixgbe_adapter *adapter = netdev_priv(netdev);
1596         if (vf >= adapter->num_vfs)
1597                 return -EINVAL;
1598         ivi->vf = vf;
1599         memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
1600         ivi->max_tx_rate = adapter->vfinfo[vf].tx_rate;
1601         ivi->min_tx_rate = 0;
1602         ivi->vlan = adapter->vfinfo[vf].pf_vlan;
1603         ivi->qos = adapter->vfinfo[vf].pf_qos;
1604         ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled;
1605         ivi->rss_query_en = adapter->vfinfo[vf].rss_query_enabled;
1606         ivi->trusted = adapter->vfinfo[vf].trusted;
1607         return 0;
1608 }