net/mlx4: Fix firmware command timeout during interrupt test
[cascardo/linux.git] / drivers / net / ethernet / mellanox / mlx4 / en_selftest.c
1 /*
2  * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
3  *
4  * This software is available to you under a choice of one of two
5  * licenses.  You may choose to be licensed under the terms of the GNU
6  * General Public License (GPL) Version 2, available from the file
7  * COPYING in the main directory of this source tree, or the
8  * OpenIB.org BSD license below:
9  *
10  *     Redistribution and use in source and binary forms, with or
11  *     without modification, are permitted provided that the following
12  *     conditions are met:
13  *
14  *      - Redistributions of source code must retain the above
15  *        copyright notice, this list of conditions and the following
16  *        disclaimer.
17  *
18  *      - Redistributions in binary form must reproduce the above
19  *        copyright notice, this list of conditions and the following
20  *        disclaimer in the documentation and/or other materials
21  *        provided with the distribution.
22  *
23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30  * SOFTWARE.
31  *
32  */
33
34 #include <linux/kernel.h>
35 #include <linux/ethtool.h>
36 #include <linux/netdevice.h>
37 #include <linux/delay.h>
38 #include <linux/mlx4/driver.h>
39
40 #include "mlx4_en.h"
41
42
43 static int mlx4_en_test_registers(struct mlx4_en_priv *priv)
44 {
45         return mlx4_cmd(priv->mdev->dev, 0, 0, 0, MLX4_CMD_HW_HEALTH_CHECK,
46                         MLX4_CMD_TIME_CLASS_A, MLX4_CMD_WRAPPED);
47 }
48
49 static int mlx4_en_test_loopback_xmit(struct mlx4_en_priv *priv)
50 {
51         struct sk_buff *skb;
52         struct ethhdr *ethh;
53         unsigned char *packet;
54         unsigned int packet_size = MLX4_LOOPBACK_TEST_PAYLOAD;
55         unsigned int i;
56         int err;
57
58
59         /* build the pkt before xmit */
60         skb = netdev_alloc_skb(priv->dev, MLX4_LOOPBACK_TEST_PAYLOAD + ETH_HLEN + NET_IP_ALIGN);
61         if (!skb)
62                 return -ENOMEM;
63
64         skb_reserve(skb, NET_IP_ALIGN);
65
66         ethh = (struct ethhdr *)skb_put(skb, sizeof(struct ethhdr));
67         packet  = (unsigned char *)skb_put(skb, packet_size);
68         memcpy(ethh->h_dest, priv->dev->dev_addr, ETH_ALEN);
69         eth_zero_addr(ethh->h_source);
70         ethh->h_proto = htons(ETH_P_ARP);
71         skb_set_mac_header(skb, 0);
72         for (i = 0; i < packet_size; ++i)       /* fill our packet */
73                 packet[i] = (unsigned char)(i & 0xff);
74
75         /* xmit the pkt */
76         err = mlx4_en_xmit(skb, priv->dev);
77         return err;
78 }
79
80 static int mlx4_en_test_loopback(struct mlx4_en_priv *priv)
81 {
82         u32 loopback_ok = 0;
83         int i;
84         bool gro_enabled;
85
86         priv->loopback_ok = 0;
87         priv->validate_loopback = 1;
88         gro_enabled = priv->dev->features & NETIF_F_GRO;
89
90         mlx4_en_update_loopback_state(priv->dev, priv->dev->features);
91         priv->dev->features &= ~NETIF_F_GRO;
92
93         /* xmit */
94         if (mlx4_en_test_loopback_xmit(priv)) {
95                 en_err(priv, "Transmitting loopback packet failed\n");
96                 goto mlx4_en_test_loopback_exit;
97         }
98
99         /* polling for result */
100         for (i = 0; i < MLX4_EN_LOOPBACK_RETRIES; ++i) {
101                 msleep(MLX4_EN_LOOPBACK_TIMEOUT);
102                 if (priv->loopback_ok) {
103                         loopback_ok = 1;
104                         break;
105                 }
106         }
107         if (!loopback_ok)
108                 en_err(priv, "Loopback packet didn't arrive\n");
109
110 mlx4_en_test_loopback_exit:
111
112         priv->validate_loopback = 0;
113
114         if (gro_enabled)
115                 priv->dev->features |= NETIF_F_GRO;
116
117         mlx4_en_update_loopback_state(priv->dev, priv->dev->features);
118         return !loopback_ok;
119 }
120
121 static int mlx4_en_test_interrupts(struct mlx4_en_priv *priv)
122 {
123         struct mlx4_en_dev *mdev = priv->mdev;
124         int err = 0;
125         int i = 0;
126
127         err = mlx4_test_async(mdev->dev);
128         /* When not in MSI_X or slave, test only async */
129         if (!(mdev->dev->flags & MLX4_FLAG_MSI_X) || mlx4_is_slave(mdev->dev))
130                 return err;
131
132         /* A loop over all completion vectors of current port,
133          * for each vector check whether it works by mapping command
134          * completions to that vector and performing a NOP command
135          */
136         for (i = 0; i < priv->rx_ring_num; i++) {
137                 err = mlx4_test_interrupt(mdev->dev, priv->rx_cq[i]->vector);
138                 if (err)
139                         break;
140         }
141
142         return err;
143 }
144
145 static int mlx4_en_test_link(struct mlx4_en_priv *priv)
146 {
147         if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
148                 return -ENOMEM;
149         if (priv->port_state.link_state == 1)
150                 return 0;
151         else
152                 return 1;
153 }
154
155 static int mlx4_en_test_speed(struct mlx4_en_priv *priv)
156 {
157
158         if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
159                 return -ENOMEM;
160
161         /* The device supports 100M, 1G, 10G, 20G, 40G and 56G speed */
162         if (priv->port_state.link_speed != SPEED_100 &&
163             priv->port_state.link_speed != SPEED_1000 &&
164             priv->port_state.link_speed != SPEED_10000 &&
165             priv->port_state.link_speed != SPEED_20000 &&
166             priv->port_state.link_speed != SPEED_40000 &&
167             priv->port_state.link_speed != SPEED_56000)
168                 return priv->port_state.link_speed;
169
170         return 0;
171 }
172
173
174 void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf)
175 {
176         struct mlx4_en_priv *priv = netdev_priv(dev);
177         int i, carrier_ok;
178
179         memset(buf, 0, sizeof(u64) * MLX4_EN_NUM_SELF_TEST);
180
181         if (*flags & ETH_TEST_FL_OFFLINE) {
182                 /* disable the interface */
183                 carrier_ok = netif_carrier_ok(dev);
184
185                 netif_carrier_off(dev);
186                 /* Wait until all tx queues are empty.
187                  * there should not be any additional incoming traffic
188                  * since we turned the carrier off */
189                 msleep(200);
190
191                 if (priv->mdev->dev->caps.flags &
192                                         MLX4_DEV_CAP_FLAG_UC_LOOPBACK) {
193                         buf[3] = mlx4_en_test_registers(priv);
194                         if (priv->port_up)
195                                 buf[4] = mlx4_en_test_loopback(priv);
196                 }
197
198                 if (carrier_ok)
199                         netif_carrier_on(dev);
200
201         }
202         buf[0] = mlx4_en_test_interrupts(priv);
203         buf[1] = mlx4_en_test_link(priv);
204         buf[2] = mlx4_en_test_speed(priv);
205
206         for (i = 0; i < MLX4_EN_NUM_SELF_TEST; i++) {
207                 if (buf[i])
208                         *flags |= ETH_TEST_FL_FAILED;
209         }
210 }