1 /*******************************************************************************
2 This contains the functions to handle the platform driver.
4 Copyright (C) 2007-2011 STMicroelectronics Ltd
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
22 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
23 *******************************************************************************/
25 #include <linux/platform_device.h>
28 #include <linux/of_net.h>
29 #include <linux/of_device.h>
32 #include "stmmac_platform.h"
34 static const struct of_device_id stmmac_dt_ids[] = {
35 /* SoC specific glue layers should come before generic bindings */
36 { .compatible = "rockchip,rk3288-gmac", .data = &rk3288_gmac_data},
37 { .compatible = "amlogic,meson6-dwmac", .data = &meson6_dwmac_data},
38 { .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data},
39 { .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
40 { .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
41 { .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
42 { .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
43 { .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
44 { .compatible = "st,spear600-gmac"},
45 { .compatible = "snps,dwmac-3.610"},
46 { .compatible = "snps,dwmac-3.70a"},
47 { .compatible = "snps,dwmac-3.710"},
48 { .compatible = "snps,dwmac"},
51 MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
56 * dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins
57 * @mcast_bins: Multicast filtering bins
59 * this function validates the number of Multicast filtering bins specified
60 * by the configuration through the device tree. The Synopsys GMAC supports
61 * 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC
62 * number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds
63 * to 7 bits, and 256 refers to 8 bits of the CRC. Any other setting is
64 * invalid and will cause the filtering algorithm to use Multicast
67 static int dwmac1000_validate_mcast_bins(int mcast_bins)
78 pr_info("Hash table entries set to unexpected value %d",
86 * dwmac1000_validate_ucast_entries - validate the Unicast address entries
87 * @ucast_entries: number of Unicast address entries
89 * This function validates the number of Unicast address entries supported
90 * by a particular Synopsys 10/100/1000 controller. The Synopsys controller
91 * supports 1, 32, 64, or 128 Unicast filter entries for it's Unicast filter
92 * logic. This function validates a valid, supported configuration is
93 * selected, and defaults to 1 Unicast address if an unsupported
94 * configuration is selected.
96 static int dwmac1000_validate_ucast_entries(int ucast_entries)
98 int x = ucast_entries;
108 pr_info("Unicast table entries set to unexpected value %d\n",
116 * stmmac_probe_config_dt - parse device-tree driver parameters
117 * @pdev: platform_device structure
118 * @plat: driver data platform structure
119 * @mac: MAC address to use
121 * this function is to read the driver parameters from device-tree and
122 * set some private fields that will be used by the main at runtime.
124 static int stmmac_probe_config_dt(struct platform_device *pdev,
125 struct plat_stmmacenet_data *plat,
128 struct device_node *np = pdev->dev.of_node;
129 struct stmmac_dma_cfg *dma_cfg;
130 const struct of_device_id *device;
135 device = of_match_device(stmmac_dt_ids, &pdev->dev);
140 const struct stmmac_of_data *data = device->data;
141 plat->has_gmac = data->has_gmac;
142 plat->enh_desc = data->enh_desc;
143 plat->tx_coe = data->tx_coe;
144 plat->rx_coe = data->rx_coe;
145 plat->bugged_jumbo = data->bugged_jumbo;
146 plat->pmt = data->pmt;
147 plat->riwt_off = data->riwt_off;
148 plat->fix_mac_speed = data->fix_mac_speed;
149 plat->bus_setup = data->bus_setup;
150 plat->setup = data->setup;
151 plat->free = data->free;
152 plat->init = data->init;
153 plat->exit = data->exit;
156 *mac = of_get_mac_address(np);
157 plat->interface = of_get_phy_mode(np);
159 /* Get max speed of operation from device tree */
160 if (of_property_read_u32(np, "max-speed", &plat->max_speed))
161 plat->max_speed = -1;
163 plat->bus_id = of_alias_get_id(np, "ethernet");
164 if (plat->bus_id < 0)
167 /* Default to phy auto-detection */
170 /* "snps,phy-addr" is not a standard property. Mark it as deprecated
171 * and warn of its use. Remove this when phy node support is added.
173 if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
174 dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
176 if (plat->phy_bus_name)
177 plat->mdio_bus_data = NULL;
179 plat->mdio_bus_data =
180 devm_kzalloc(&pdev->dev,
181 sizeof(struct stmmac_mdio_bus_data),
184 plat->force_sf_dma_mode =
185 of_property_read_bool(np, "snps,force_sf_dma_mode");
187 /* Set the maxmtu to a default of JUMBO_LEN in case the
188 * parameter is not present in the device tree.
190 plat->maxmtu = JUMBO_LEN;
193 * Currently only the properties needed on SPEAr600
194 * are provided. All other properties should be added
195 * once needed on other platforms.
197 if (of_device_is_compatible(np, "st,spear600-gmac") ||
198 of_device_is_compatible(np, "snps,dwmac-3.70a") ||
199 of_device_is_compatible(np, "snps,dwmac")) {
200 /* Note that the max-frame-size parameter as defined in the
201 * ePAPR v1.1 spec is defined as max-frame-size, it's
202 * actually used as the IEEE definition of MAC Client
203 * data, or MTU. The ePAPR specification is confusing as
204 * the definition is max-frame-size, but usage examples
207 of_property_read_u32(np, "max-frame-size", &plat->maxmtu);
208 of_property_read_u32(np, "snps,multicast-filter-bins",
209 &plat->multicast_filter_bins);
210 of_property_read_u32(np, "snps,perfect-filter-entries",
211 &plat->unicast_filter_entries);
212 plat->unicast_filter_entries = dwmac1000_validate_ucast_entries(
213 plat->unicast_filter_entries);
214 plat->multicast_filter_bins = dwmac1000_validate_mcast_bins(
215 plat->multicast_filter_bins);
220 if (of_device_is_compatible(np, "snps,dwmac-3.610") ||
221 of_device_is_compatible(np, "snps,dwmac-3.710")) {
223 plat->bugged_jumbo = 1;
224 plat->force_sf_dma_mode = 1;
227 if (of_find_property(np, "snps,pbl", NULL)) {
228 dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
232 plat->dma_cfg = dma_cfg;
233 of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
234 dma_cfg->fixed_burst =
235 of_property_read_bool(np, "snps,fixed-burst");
236 dma_cfg->mixed_burst =
237 of_property_read_bool(np, "snps,mixed-burst");
238 of_property_read_u32(np, "snps,burst_len", &dma_cfg->burst_len);
239 if (dma_cfg->burst_len < 0 || dma_cfg->burst_len > 256)
240 dma_cfg->burst_len = 0;
242 plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
243 if (plat->force_thresh_dma_mode) {
244 plat->force_sf_dma_mode = 0;
245 pr_warn("force_sf_dma_mode is ignored if force_thresh_dma_mode is set.");
251 static int stmmac_probe_config_dt(struct platform_device *pdev,
252 struct plat_stmmacenet_data *plat,
257 #endif /* CONFIG_OF */
260 * stmmac_pltfr_probe - platform driver probe.
261 * @pdev: platform device pointer
262 * Description: platform_device probe function. It is to allocate
263 * the necessary platform resources, invoke custom helper (if required) and
264 * invoke the main probe function.
266 static int stmmac_pltfr_probe(struct platform_device *pdev)
269 struct resource *res;
270 struct device *dev = &pdev->dev;
271 void __iomem *addr = NULL;
272 struct stmmac_priv *priv = NULL;
273 struct plat_stmmacenet_data *plat_dat = NULL;
274 const char *mac = NULL;
276 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
277 addr = devm_ioremap_resource(dev, res);
279 return PTR_ERR(addr);
281 plat_dat = dev_get_platdata(&pdev->dev);
284 plat_dat = devm_kzalloc(&pdev->dev,
285 sizeof(struct plat_stmmacenet_data),
288 pr_err("%s: ERROR: no memory", __func__);
292 /* Set default value for multicast hash bins */
293 plat_dat->multicast_filter_bins = HASH_TABLE_SIZE;
295 /* Set default value for unicast filter entries */
296 plat_dat->unicast_filter_entries = 1;
298 if (pdev->dev.of_node) {
299 ret = stmmac_probe_config_dt(pdev, plat_dat, &mac);
301 pr_err("%s: main dt probe failed", __func__);
306 /* Custom setup (if needed) */
307 if (plat_dat->setup) {
308 plat_dat->bsp_priv = plat_dat->setup(pdev);
309 if (IS_ERR(plat_dat->bsp_priv))
310 return PTR_ERR(plat_dat->bsp_priv);
313 /* Custom initialisation (if needed)*/
314 if (plat_dat->init) {
315 ret = plat_dat->init(pdev, plat_dat->bsp_priv);
320 priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
322 pr_err("%s: main driver probe failed", __func__);
323 return PTR_ERR(priv);
326 /* Get MAC address if available (DT) */
328 memcpy(priv->dev->dev_addr, mac, ETH_ALEN);
330 /* Get the MAC information */
331 priv->dev->irq = platform_get_irq_byname(pdev, "macirq");
332 if (priv->dev->irq < 0) {
333 if (priv->dev->irq != -EPROBE_DEFER) {
334 netdev_err(priv->dev,
335 "MAC IRQ configuration information not found\n");
337 return priv->dev->irq;
341 * On some platforms e.g. SPEAr the wake up irq differs from the mac irq
342 * The external wake up irq can be passed through the platform code
343 * named as "eth_wake_irq"
345 * In case the wake up interrupt is not passed from the platform
346 * so the driver will continue to use the mac irq (ndev->irq)
348 priv->wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
349 if (priv->wol_irq < 0) {
350 if (priv->wol_irq == -EPROBE_DEFER)
351 return -EPROBE_DEFER;
352 priv->wol_irq = priv->dev->irq;
355 priv->lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
356 if (priv->lpi_irq == -EPROBE_DEFER)
357 return -EPROBE_DEFER;
359 platform_set_drvdata(pdev, priv->dev);
361 pr_debug("STMMAC platform driver registration completed");
367 * stmmac_pltfr_remove
368 * @pdev: platform device pointer
369 * Description: this function calls the main to free the net resources
370 * and calls the platforms hook and release the resources (e.g. mem).
372 static int stmmac_pltfr_remove(struct platform_device *pdev)
374 struct net_device *ndev = platform_get_drvdata(pdev);
375 struct stmmac_priv *priv = netdev_priv(ndev);
376 int ret = stmmac_dvr_remove(ndev);
378 if (priv->plat->exit)
379 priv->plat->exit(pdev, priv->plat->bsp_priv);
381 if (priv->plat->free)
382 priv->plat->free(pdev, priv->plat->bsp_priv);
387 #ifdef CONFIG_PM_SLEEP
389 * stmmac_pltfr_suspend
390 * @dev: device pointer
391 * Description: this function is invoked when suspend the driver and it direcly
392 * call the main suspend function and then, if required, on some platform, it
393 * can call an exit helper.
395 static int stmmac_pltfr_suspend(struct device *dev)
398 struct net_device *ndev = dev_get_drvdata(dev);
399 struct stmmac_priv *priv = netdev_priv(ndev);
400 struct platform_device *pdev = to_platform_device(dev);
402 ret = stmmac_suspend(ndev);
403 if (priv->plat->exit)
404 priv->plat->exit(pdev, priv->plat->bsp_priv);
410 * stmmac_pltfr_resume
411 * @dev: device pointer
412 * Description: this function is invoked when resume the driver before calling
413 * the main resume function, on some platforms, it can call own init helper
416 static int stmmac_pltfr_resume(struct device *dev)
418 struct net_device *ndev = dev_get_drvdata(dev);
419 struct stmmac_priv *priv = netdev_priv(ndev);
420 struct platform_device *pdev = to_platform_device(dev);
422 if (priv->plat->init)
423 priv->plat->init(pdev, priv->plat->bsp_priv);
425 return stmmac_resume(ndev);
427 #endif /* CONFIG_PM_SLEEP */
429 static SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops,
430 stmmac_pltfr_suspend, stmmac_pltfr_resume);
432 static struct platform_driver stmmac_pltfr_driver = {
433 .probe = stmmac_pltfr_probe,
434 .remove = stmmac_pltfr_remove,
436 .name = STMMAC_RESOURCE_NAME,
437 .pm = &stmmac_pltfr_pm_ops,
438 .of_match_table = of_match_ptr(stmmac_dt_ids),
442 module_platform_driver(stmmac_pltfr_driver);
444 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver");
445 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
446 MODULE_LICENSE("GPL");