drivers/net/phy/phy.c

   1 /*
   2  * drivers/net/phy/phy.c
   3  *
   4  * Framework for configuring and reading PHY devices
   5  * Based on code in sungem_phy.c and gianfar_phy.c
   6  *
   7  * Author: Andy Fleming
   8  *
   9  * Copyright (c) 2004 Freescale Semiconductor, Inc.
  10  * Copyright (c) 2006, 2007  Maciej W. Rozycki
  11  *
  12  * This program is free software; you can redistribute  it and/or modify it
  13  * under  the terms of  the GNU General  Public License as published by the
  14  * Free Software Foundation;  either version 2 of the  License, or (at your
  15  * option) any later version.
  16  *
  17  */
  18
  19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  20
  21 #include <linux/kernel.h>
  22 #include <linux/string.h>
  23 #include <linux/errno.h>
  24 #include <linux/unistd.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/init.h>
  27 #include <linux/delay.h>
  28 #include <linux/netdevice.h>
  29 #include <linux/etherdevice.h>
  30 #include <linux/skbuff.h>
  31 #include <linux/mm.h>
  32 #include <linux/module.h>
  33 #include <linux/mii.h>
  34 #include <linux/ethtool.h>
  35 #include <linux/phy.h>
  36 #include <linux/timer.h>
  37 #include <linux/workqueue.h>
  38 #include <linux/mdio.h>
  39
  40 #include <linux/atomic.h>
  41 #include <asm/io.h>
  42 #include <asm/irq.h>
  43 #include <asm/uaccess.h>
  44
  45 /**
  46  * phy_print_status - Convenience function to print out the current phy status
  47  * @phydev: the phy_device struct
  48  */
  49 void phy_print_status(struct phy_device *phydev)
  50 {
  51         if (phydev->link)
  52                 pr_info("%s - Link is Up - %d/%s\n",
  53                         dev_name(&phydev->dev),
  54                         phydev->speed,
  55                         DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
  56         else
  57                 pr_info("%s - Link is Down\n", dev_name(&phydev->dev));
  58 }
  59 EXPORT_SYMBOL(phy_print_status);
  60
  61 /**
  62  * phy_clear_interrupt - Ack the phy device's interrupt
  63  * @phydev: the phy_device struct
  64  *
  65  * If the @phydev driver has an ack_interrupt function, call it to
  66  * ack and clear the phy device's interrupt.
  67  *
  68  * Returns 0 on success on < 0 on error.
  69  */
  70 static int phy_clear_interrupt(struct phy_device *phydev)
  71 {
  72         int err = 0;
  73
  74         if (phydev->drv->ack_interrupt)
  75                 err = phydev->drv->ack_interrupt(phydev);
  76
  77         return err;
  78 }
  79
  80 /**
  81  * phy_config_interrupt - configure the PHY device for the requested interrupts
  82  * @phydev: the phy_device struct
  83  * @interrupts: interrupt flags to configure for this @phydev
  84  *
  85  * Returns 0 on success on < 0 on error.
  86  */
  87 static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
  88 {
  89         int err = 0;
  90
  91         phydev->interrupts = interrupts;
  92         if (phydev->drv->config_intr)
  93                 err = phydev->drv->config_intr(phydev);
  94
  95         return err;
  96 }
  97
  98
  99 /**
 100  * phy_aneg_done - return auto-negotiation status
 101  * @phydev: target phy_device struct
 102  *
 103  * Description: Reads the status register and returns 0 either if
 104  *   auto-negotiation is incomplete, or if there was an error.
 105  *   Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
 106  */
 107 static inline int phy_aneg_done(struct phy_device *phydev)
 108 {
 109         int retval;
 110
 111         retval = phy_read(phydev, MII_BMSR);
 112
 113         return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
 114 }
 115
 116 /* A structure for mapping a particular speed and duplex
 117  * combination to a particular SUPPORTED and ADVERTISED value */
 118 struct phy_setting {
 119         int speed;
 120         int duplex;
 121         u32 setting;
 122 };
 123
 124 /* A mapping of all SUPPORTED settings to speed/duplex */
 125 static const struct phy_setting settings[] = {
 126         {
 127                 .speed = 10000,
 128                 .duplex = DUPLEX_FULL,
 129                 .setting = SUPPORTED_10000baseT_Full,
 130         },
 131         {
 132                 .speed = SPEED_1000,
 133                 .duplex = DUPLEX_FULL,
 134                 .setting = SUPPORTED_1000baseT_Full,
 135         },
 136         {
 137                 .speed = SPEED_1000,
 138                 .duplex = DUPLEX_HALF,
 139                 .setting = SUPPORTED_1000baseT_Half,
 140         },
 141         {
 142                 .speed = SPEED_100,
 143                 .duplex = DUPLEX_FULL,
 144                 .setting = SUPPORTED_100baseT_Full,
 145         },
 146         {
 147                 .speed = SPEED_100,
 148                 .duplex = DUPLEX_HALF,
 149                 .setting = SUPPORTED_100baseT_Half,
 150         },
 151         {
 152                 .speed = SPEED_10,
 153                 .duplex = DUPLEX_FULL,
 154                 .setting = SUPPORTED_10baseT_Full,
 155         },
 156         {
 157                 .speed = SPEED_10,
 158                 .duplex = DUPLEX_HALF,
 159                 .setting = SUPPORTED_10baseT_Half,
 160         },
 161 };
 162
 163 #define MAX_NUM_SETTINGS ARRAY_SIZE(settings)
 164
 165 /**
 166  * phy_find_setting - find a PHY settings array entry that matches speed & duplex
 167  * @speed: speed to match
 168  * @duplex: duplex to match
 169  *
 170  * Description: Searches the settings array for the setting which
 171  *   matches the desired speed and duplex, and returns the index
 172  *   of that setting.  Returns the index of the last setting if
 173  *   none of the others match.
 174  */
 175 static inline int phy_find_setting(int speed, int duplex)
 176 {
 177         int idx = 0;
 178
 179         while (idx < ARRAY_SIZE(settings) &&
 180                         (settings[idx].speed != speed ||
 181                         settings[idx].duplex != duplex))
 182                 idx++;
 183
 184         return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
 185 }
 186
 187 /**
 188  * phy_find_valid - find a PHY setting that matches the requested features mask
 189  * @idx: The first index in settings[] to search
 190  * @features: A mask of the valid settings
 191  *
 192  * Description: Returns the index of the first valid setting less
 193  *   than or equal to the one pointed to by idx, as determined by
 194  *   the mask in features.  Returns the index of the last setting
 195  *   if nothing else matches.
 196  */
 197 static inline int phy_find_valid(int idx, u32 features)
 198 {
 199         while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features))
 200                 idx++;
 201
 202         return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
 203 }
 204
 205 /**
 206  * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
 207  * @phydev: the target phy_device struct
 208  *
 209  * Description: Make sure the PHY is set to supported speeds and
 210  *   duplexes.  Drop down by one in this order:  1000/FULL,
 211  *   1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
 212  */
 213 static void phy_sanitize_settings(struct phy_device *phydev)
 214 {
 215         u32 features = phydev->supported;
 216         int idx;
 217
 218         /* Sanitize settings based on PHY capabilities */
 219         if ((features & SUPPORTED_Autoneg) == 0)
 220                 phydev->autoneg = AUTONEG_DISABLE;
 221
 222         idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
 223                         features);
 224
 225         phydev->speed = settings[idx].speed;
 226         phydev->duplex = settings[idx].duplex;
 227 }
 228
 229 /**
 230  * phy_ethtool_sset - generic ethtool sset function, handles all the details
 231  * @phydev: target phy_device struct
 232  * @cmd: ethtool_cmd
 233  *
 234  * A few notes about parameter checking:
 235  * - We don't set port or transceiver, so we don't care what they
 236  *   were set to.
 237  * - phy_start_aneg() will make sure forced settings are sane, and
 238  *   choose the next best ones from the ones selected, so we don't
 239  *   care if ethtool tries to give us bad values.
 240  */
 241 int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 242 {
 243         u32 speed = ethtool_cmd_speed(cmd);
 244
 245         if (cmd->phy_address != phydev->addr)
 246                 return -EINVAL;
 247
 248         /* We make sure that we don't pass unsupported
 249          * values in to the PHY */
 250         cmd->advertising &= phydev->supported;
 251
 252         /* Verify the settings we care about. */
 253         if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
 254                 return -EINVAL;
 255
 256         if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
 257                 return -EINVAL;
 258
 259         if (cmd->autoneg == AUTONEG_DISABLE &&
 260             ((speed != SPEED_1000 &&
 261               speed != SPEED_100 &&
 262               speed != SPEED_10) ||
 263              (cmd->duplex != DUPLEX_HALF &&
 264               cmd->duplex != DUPLEX_FULL)))
 265                 return -EINVAL;
 266
 267         phydev->autoneg = cmd->autoneg;
 268
 269         phydev->speed = speed;
 270
 271         phydev->advertising = cmd->advertising;
 272
 273         if (AUTONEG_ENABLE == cmd->autoneg)
 274                 phydev->advertising |= ADVERTISED_Autoneg;
 275         else
 276                 phydev->advertising &= ~ADVERTISED_Autoneg;
 277
 278         phydev->duplex = cmd->duplex;
 279
 280         /* Restart the PHY */
 281         phy_start_aneg(phydev);
 282
 283         return 0;
 284 }
 285 EXPORT_SYMBOL(phy_ethtool_sset);
 286
 287 int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 288 {
 289         cmd->supported = phydev->supported;
 290
 291         cmd->advertising = phydev->advertising;
 292
 293         ethtool_cmd_speed_set(cmd, phydev->speed);
 294         cmd->duplex = phydev->duplex;
 295         cmd->port = PORT_MII;
 296         cmd->phy_address = phydev->addr;
 297         cmd->transceiver = phy_is_internal(phydev) ?
 298                 XCVR_INTERNAL : XCVR_EXTERNAL;
 299         cmd->autoneg = phydev->autoneg;
 300
 301         return 0;
 302 }
 303 EXPORT_SYMBOL(phy_ethtool_gset);
 304
 305 /**
 306  * phy_mii_ioctl - generic PHY MII ioctl interface
 307  * @phydev: the phy_device struct
 308  * @ifr: &struct ifreq for socket ioctl's
 309  * @cmd: ioctl cmd to execute
 310  *
 311  * Note that this function is currently incompatible with the
 312  * PHYCONTROL layer.  It changes registers without regard to
 313  * current state.  Use at own risk.
 314  */
 315 int phy_mii_ioctl(struct phy_device *phydev,
 316                 struct ifreq *ifr, int cmd)
 317 {
 318         struct mii_ioctl_data *mii_data = if_mii(ifr);
 319         u16 val = mii_data->val_in;
 320
 321         switch (cmd) {
 322         case SIOCGMIIPHY:
 323                 mii_data->phy_id = phydev->addr;
 324                 /* fall through */
 325
 326         case SIOCGMIIREG:
 327                 mii_data->val_out = mdiobus_read(phydev->bus, mii_data->phy_id,
 328                                                  mii_data->reg_num);
 329                 break;
 330
 331         case SIOCSMIIREG:
 332                 if (mii_data->phy_id == phydev->addr) {
 333                         switch(mii_data->reg_num) {
 334                         case MII_BMCR:
 335                                 if ((val & (BMCR_RESET|BMCR_ANENABLE)) == 0)
 336                                         phydev->autoneg = AUTONEG_DISABLE;
 337                                 else
 338                                         phydev->autoneg = AUTONEG_ENABLE;
 339                                 if ((!phydev->autoneg) && (val & BMCR_FULLDPLX))
 340                                         phydev->duplex = DUPLEX_FULL;
 341                                 else
 342                                         phydev->duplex = DUPLEX_HALF;
 343                                 if ((!phydev->autoneg) &&
 344                                                 (val & BMCR_SPEED1000))
 345                                         phydev->speed = SPEED_1000;
 346                                 else if ((!phydev->autoneg) &&
 347                                                 (val & BMCR_SPEED100))
 348                                         phydev->speed = SPEED_100;
 349                                 break;
 350                         case MII_ADVERTISE:
 351                                 phydev->advertising = val;
 352                                 break;
 353                         default:
 354                                 /* do nothing */
 355                                 break;
 356                         }
 357                 }
 358
 359                 mdiobus_write(phydev->bus, mii_data->phy_id,
 360                               mii_data->reg_num, val);
 361
 362                 if (mii_data->reg_num == MII_BMCR &&
 363                     val & BMCR_RESET &&
 364                     phydev->drv->config_init) {
 365                         phy_scan_fixups(phydev);
 366                         phydev->drv->config_init(phydev);
 367                 }
 368                 break;
 369
 370         case SIOCSHWTSTAMP:
 371                 if (phydev->drv->hwtstamp)
 372                         return phydev->drv->hwtstamp(phydev, ifr);
 373                 /* fall through */
 374
 375         default:
 376                 return -EOPNOTSUPP;
 377         }
 378
 379         return 0;
 380 }
 381 EXPORT_SYMBOL(phy_mii_ioctl);
 382
 383 /**
 384  * phy_start_aneg - start auto-negotiation for this PHY device
 385  * @phydev: the phy_device struct
 386  *
 387  * Description: Sanitizes the settings (if we're not autonegotiating
 388  *   them), and then calls the driver's config_aneg function.
 389  *   If the PHYCONTROL Layer is operating, we change the state to
 390  *   reflect the beginning of Auto-negotiation or forcing.
 391  */
 392 int phy_start_aneg(struct phy_device *phydev)
 393 {
 394         int err;
 395
 396         mutex_lock(&phydev->lock);
 397
 398         if (AUTONEG_DISABLE == phydev->autoneg)
 399                 phy_sanitize_settings(phydev);
 400
 401         err = phydev->drv->config_aneg(phydev);
 402
 403         if (err < 0)
 404                 goto out_unlock;
 405
 406         if (phydev->state != PHY_HALTED) {
 407                 if (AUTONEG_ENABLE == phydev->autoneg) {
 408                         phydev->state = PHY_AN;
 409                         phydev->link_timeout = PHY_AN_TIMEOUT;
 410                 } else {
 411                         phydev->state = PHY_FORCING;
 412                         phydev->link_timeout = PHY_FORCE_TIMEOUT;
 413                 }
 414         }
 415
 416 out_unlock:
 417         mutex_unlock(&phydev->lock);
 418         return err;
 419 }
 420 EXPORT_SYMBOL(phy_start_aneg);
 421
 422
 423 /**
 424  * phy_start_machine - start PHY state machine tracking
 425  * @phydev: the phy_device struct
 426  * @handler: callback function for state change notifications
 427  *
 428  * Description: The PHY infrastructure can run a state machine
 429  *   which tracks whether the PHY is starting up, negotiating,
 430  *   etc.  This function starts the timer which tracks the state
 431  *   of the PHY.  If you want to be notified when the state changes,
 432  *   pass in the callback @handler, otherwise, pass NULL.  If you
 433  *   want to maintain your own state machine, do not call this
 434  *   function.
 435  */
 436 void phy_start_machine(struct phy_device *phydev,
 437                 void (*handler)(struct net_device *))
 438 {
 439         phydev->adjust_state = handler;
 440
 441         queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, HZ);
 442 }
 443
 444 /**
 445  * phy_stop_machine - stop the PHY state machine tracking
 446  * @phydev: target phy_device struct
 447  *
 448  * Description: Stops the state machine timer, sets the state to UP
 449  *   (unless it wasn't up yet). This function must be called BEFORE
 450  *   phy_detach.
 451  */
 452 void phy_stop_machine(struct phy_device *phydev)
 453 {
 454         cancel_delayed_work_sync(&phydev->state_queue);
 455
 456         mutex_lock(&phydev->lock);
 457         if (phydev->state > PHY_UP)
 458                 phydev->state = PHY_UP;
 459         mutex_unlock(&phydev->lock);
 460
 461         phydev->adjust_state = NULL;
 462 }
 463
 464 /**
 465  * phy_error - enter HALTED state for this PHY device
 466  * @phydev: target phy_device struct
 467  *
 468  * Moves the PHY to the HALTED state in response to a read
 469  * or write error, and tells the controller the link is down.
 470  * Must not be called from interrupt context, or while the
 471  * phydev->lock is held.
 472  */
 473 static void phy_error(struct phy_device *phydev)
 474 {
 475         mutex_lock(&phydev->lock);
 476         phydev->state = PHY_HALTED;
 477         mutex_unlock(&phydev->lock);
 478 }
 479
 480 /**
 481  * phy_interrupt - PHY interrupt handler
 482  * @irq: interrupt line
 483  * @phy_dat: phy_device pointer
 484  *
 485  * Description: When a PHY interrupt occurs, the handler disables
 486  * interrupts, and schedules a work task to clear the interrupt.
 487  */
 488 static irqreturn_t phy_interrupt(int irq, void *phy_dat)
 489 {
 490         struct phy_device *phydev = phy_dat;
 491
 492         if (PHY_HALTED == phydev->state)
 493                 return IRQ_NONE;                /* It can't be ours.  */
 494
 495         /* The MDIO bus is not allowed to be written in interrupt
 496          * context, so we need to disable the irq here.  A work
 497          * queue will write the PHY to disable and clear the
 498          * interrupt, and then reenable the irq line. */
 499         disable_irq_nosync(irq);
 500         atomic_inc(&phydev->irq_disable);
 501
 502         queue_work(system_power_efficient_wq, &phydev->phy_queue);
 503
 504         return IRQ_HANDLED;
 505 }
 506
 507 /**
 508  * phy_enable_interrupts - Enable the interrupts from the PHY side
 509  * @phydev: target phy_device struct
 510  */
 511 static int phy_enable_interrupts(struct phy_device *phydev)
 512 {
 513         int err;
 514
 515         err = phy_clear_interrupt(phydev);
 516
 517         if (err < 0)
 518                 return err;
 519
 520         err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
 521
 522         return err;
 523 }
 524
 525 /**
 526  * phy_disable_interrupts - Disable the PHY interrupts from the PHY side
 527  * @phydev: target phy_device struct
 528  */
 529 static int phy_disable_interrupts(struct phy_device *phydev)
 530 {
 531         int err;
 532
 533         /* Disable PHY interrupts */
 534         err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
 535
 536         if (err)
 537                 goto phy_err;
 538
 539         /* Clear the interrupt */
 540         err = phy_clear_interrupt(phydev);
 541
 542         if (err)
 543                 goto phy_err;
 544
 545         return 0;
 546
 547 phy_err:
 548         phy_error(phydev);
 549
 550         return err;
 551 }
 552
 553 /**
 554  * phy_start_interrupts - request and enable interrupts for a PHY device
 555  * @phydev: target phy_device struct
 556  *
 557  * Description: Request the interrupt for the given PHY.
 558  *   If this fails, then we set irq to PHY_POLL.
 559  *   Otherwise, we enable the interrupts in the PHY.
 560  *   This should only be called with a valid IRQ number.
 561  *   Returns 0 on success or < 0 on error.
 562  */
 563 int phy_start_interrupts(struct phy_device *phydev)
 564 {
 565         int err = 0;
 566
 567         atomic_set(&phydev->irq_disable, 0);
 568         if (request_irq(phydev->irq, phy_interrupt,
 569                                 IRQF_SHARED,
 570                                 "phy_interrupt",
 571                                 phydev) < 0) {
 572                 pr_warn("%s: Can't get IRQ %d (PHY)\n",
 573                         phydev->bus->name, phydev->irq);
 574                 phydev->irq = PHY_POLL;
 575                 return 0;
 576         }
 577
 578         err = phy_enable_interrupts(phydev);
 579
 580         return err;
 581 }
 582 EXPORT_SYMBOL(phy_start_interrupts);
 583
 584 /**
 585  * phy_stop_interrupts - disable interrupts from a PHY device
 586  * @phydev: target phy_device struct
 587  */
 588 int phy_stop_interrupts(struct phy_device *phydev)
 589 {
 590         int err;
 591
 592         err = phy_disable_interrupts(phydev);
 593
 594         if (err)
 595                 phy_error(phydev);
 596
 597         free_irq(phydev->irq, phydev);
 598
 599         /*
 600          * Cannot call flush_scheduled_work() here as desired because
 601          * of rtnl_lock(), but we do not really care about what would
 602          * be done, except from enable_irq(), so cancel any work
 603          * possibly pending and take care of the matter below.
 604          */
 605         cancel_work_sync(&phydev->phy_queue);
 606         /*
 607          * If work indeed has been cancelled, disable_irq() will have
 608          * been left unbalanced from phy_interrupt() and enable_irq()
 609          * has to be called so that other devices on the line work.
 610          */
 611         while (atomic_dec_return(&phydev->irq_disable) >= 0)
 612                 enable_irq(phydev->irq);
 613
 614         return err;
 615 }
 616 EXPORT_SYMBOL(phy_stop_interrupts);
 617
 618
 619 /**
 620  * phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes
 621  * @work: work_struct that describes the work to be done
 622  */
 623 void phy_change(struct work_struct *work)
 624 {
 625         int err;
 626         struct phy_device *phydev =
 627                 container_of(work, struct phy_device, phy_queue);
 628
 629         if (phydev->drv->did_interrupt &&
 630             !phydev->drv->did_interrupt(phydev))
 631                 goto ignore;
 632
 633         err = phy_disable_interrupts(phydev);
 634
 635         if (err)
 636                 goto phy_err;
 637
 638         mutex_lock(&phydev->lock);
 639         if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
 640                 phydev->state = PHY_CHANGELINK;
 641         mutex_unlock(&phydev->lock);
 642
 643         atomic_dec(&phydev->irq_disable);
 644         enable_irq(phydev->irq);
 645
 646         /* Reenable interrupts */
 647         if (PHY_HALTED != phydev->state)
 648                 err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
 649
 650         if (err)
 651                 goto irq_enable_err;
 652
 653         /* reschedule state queue work to run as soon as possible */
 654         cancel_delayed_work_sync(&phydev->state_queue);
 655         queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, 0);
 656
 657         return;
 658
 659 ignore:
 660         atomic_dec(&phydev->irq_disable);
 661         enable_irq(phydev->irq);
 662         return;
 663
 664 irq_enable_err:
 665         disable_irq(phydev->irq);
 666         atomic_inc(&phydev->irq_disable);
 667 phy_err:
 668         phy_error(phydev);
 669 }
 670
 671 /**
 672  * phy_stop - Bring down the PHY link, and stop checking the status
 673  * @phydev: target phy_device struct
 674  */
 675 void phy_stop(struct phy_device *phydev)
 676 {
 677         mutex_lock(&phydev->lock);
 678
 679         if (PHY_HALTED == phydev->state)
 680                 goto out_unlock;
 681
 682         if (phy_interrupt_is_valid(phydev)) {
 683                 /* Disable PHY Interrupts */
 684                 phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
 685
 686                 /* Clear any pending interrupts */
 687                 phy_clear_interrupt(phydev);
 688         }
 689
 690         phydev->state = PHY_HALTED;
 691
 692 out_unlock:
 693         mutex_unlock(&phydev->lock);
 694
 695         /*
 696          * Cannot call flush_scheduled_work() here as desired because
 697          * of rtnl_lock(), but PHY_HALTED shall guarantee phy_change()
 698          * will not reenable interrupts.
 699          */
 700 }
 701
 702
 703 /**
 704  * phy_start - start or restart a PHY device
 705  * @phydev: target phy_device struct
 706  *
 707  * Description: Indicates the attached device's readiness to
 708  *   handle PHY-related work.  Used during startup to start the
 709  *   PHY, and after a call to phy_stop() to resume operation.
 710  *   Also used to indicate the MDIO bus has cleared an error
 711  *   condition.
 712  */
 713 void phy_start(struct phy_device *phydev)
 714 {
 715         mutex_lock(&phydev->lock);
 716
 717         switch (phydev->state) {
 718                 case PHY_STARTING:
 719                         phydev->state = PHY_PENDING;
 720                         break;
 721                 case PHY_READY:
 722                         phydev->state = PHY_UP;
 723                         break;
 724                 case PHY_HALTED:
 725                         phydev->state = PHY_RESUMING;
 726                 default:
 727                         break;
 728         }
 729         mutex_unlock(&phydev->lock);
 730 }
 731 EXPORT_SYMBOL(phy_stop);
 732 EXPORT_SYMBOL(phy_start);
 733
 734 /**
 735  * phy_state_machine - Handle the state machine
 736  * @work: work_struct that describes the work to be done
 737  */
 738 void phy_state_machine(struct work_struct *work)
 739 {
 740         struct delayed_work *dwork = to_delayed_work(work);
 741         struct phy_device *phydev =
 742                         container_of(dwork, struct phy_device, state_queue);
 743         int needs_aneg = 0;
 744         int err = 0;
 745
 746         mutex_lock(&phydev->lock);
 747
 748         if (phydev->adjust_state)
 749                 phydev->adjust_state(phydev->attached_dev);
 750
 751         switch(phydev->state) {
 752                 case PHY_DOWN:
 753                 case PHY_STARTING:
 754                 case PHY_READY:
 755                 case PHY_PENDING:
 756                         break;
 757                 case PHY_UP:
 758                         needs_aneg = 1;
 759
 760                         phydev->link_timeout = PHY_AN_TIMEOUT;
 761
 762                         break;
 763                 case PHY_AN:
 764                         err = phy_read_status(phydev);
 765
 766                         if (err < 0)
 767                                 break;
 768
 769                         /* If the link is down, give up on
 770                          * negotiation for now */
 771                         if (!phydev->link) {
 772                                 phydev->state = PHY_NOLINK;
 773                                 netif_carrier_off(phydev->attached_dev);
 774                                 phydev->adjust_link(phydev->attached_dev);
 775                                 break;
 776                         }
 777
 778                         /* Check if negotiation is done.  Break
 779                          * if there's an error */
 780                         err = phy_aneg_done(phydev);
 781                         if (err < 0)
 782                                 break;
 783
 784                         /* If AN is done, we're running */
 785                         if (err > 0) {
 786                                 phydev->state = PHY_RUNNING;
 787                                 netif_carrier_on(phydev->attached_dev);
 788                                 phydev->adjust_link(phydev->attached_dev);
 789
 790                         } else if (0 == phydev->link_timeout--) {
 791                                 needs_aneg = 1;
 792                                 /* If we have the magic_aneg bit,
 793                                  * we try again */
 794                                 if (phydev->drv->flags & PHY_HAS_MAGICANEG)
 795                                         break;
 796                         }
 797                         break;
 798                 case PHY_NOLINK:
 799                         err = phy_read_status(phydev);
 800
 801                         if (err)
 802                                 break;
 803
 804                         if (phydev->link) {
 805                                 phydev->state = PHY_RUNNING;
 806                                 netif_carrier_on(phydev->attached_dev);
 807                                 phydev->adjust_link(phydev->attached_dev);
 808                         }
 809                         break;
 810                 case PHY_FORCING:
 811                         err = genphy_update_link(phydev);
 812
 813                         if (err)
 814                                 break;
 815
 816                         if (phydev->link) {
 817                                 phydev->state = PHY_RUNNING;
 818                                 netif_carrier_on(phydev->attached_dev);
 819                         } else {
 820                                 if (0 == phydev->link_timeout--)
 821                                         needs_aneg = 1;
 822                         }
 823
 824                         phydev->adjust_link(phydev->attached_dev);
 825                         break;
 826                 case PHY_RUNNING:
 827                         /* Only register a CHANGE if we are
 828                          * polling or ignoring interrupts
 829                          */
 830                         if (!phy_interrupt_is_valid(phydev))
 831                                 phydev->state = PHY_CHANGELINK;
 832                         break;
 833                 case PHY_CHANGELINK:
 834                         err = phy_read_status(phydev);
 835
 836                         if (err)
 837                                 break;
 838
 839                         if (phydev->link) {
 840                                 phydev->state = PHY_RUNNING;
 841                                 netif_carrier_on(phydev->attached_dev);
 842                         } else {
 843                                 phydev->state = PHY_NOLINK;
 844                                 netif_carrier_off(phydev->attached_dev);
 845                         }
 846
 847                         phydev->adjust_link(phydev->attached_dev);
 848
 849                         if (phy_interrupt_is_valid(phydev))
 850                                 err = phy_config_interrupt(phydev,
 851                                                 PHY_INTERRUPT_ENABLED);
 852                         break;
 853                 case PHY_HALTED:
 854                         if (phydev->link) {
 855                                 phydev->link = 0;
 856                                 netif_carrier_off(phydev->attached_dev);
 857                                 phydev->adjust_link(phydev->attached_dev);
 858                         }
 859                         break;
 860                 case PHY_RESUMING:
 861
 862                         err = phy_clear_interrupt(phydev);
 863
 864                         if (err)
 865                                 break;
 866
 867                         err = phy_config_interrupt(phydev,
 868                                         PHY_INTERRUPT_ENABLED);
 869
 870                         if (err)
 871                                 break;
 872
 873                         if (AUTONEG_ENABLE == phydev->autoneg) {
 874                                 err = phy_aneg_done(phydev);
 875                                 if (err < 0)
 876                                         break;
 877
 878                                 /* err > 0 if AN is done.
 879                                  * Otherwise, it's 0, and we're
 880                                  * still waiting for AN */
 881                                 if (err > 0) {
 882                                         err = phy_read_status(phydev);
 883                                         if (err)
 884                                                 break;
 885
 886                                         if (phydev->link) {
 887                                                 phydev->state = PHY_RUNNING;
 888                                                 netif_carrier_on(phydev->attached_dev);
 889                                         } else
 890                                                 phydev->state = PHY_NOLINK;
 891                                         phydev->adjust_link(phydev->attached_dev);
 892                                 } else {
 893                                         phydev->state = PHY_AN;
 894                                         phydev->link_timeout = PHY_AN_TIMEOUT;
 895                                 }
 896                         } else {
 897                                 err = phy_read_status(phydev);
 898                                 if (err)
 899                                         break;
 900
 901                                 if (phydev->link) {
 902                                         phydev->state = PHY_RUNNING;
 903                                         netif_carrier_on(phydev->attached_dev);
 904                                 } else
 905                                         phydev->state = PHY_NOLINK;
 906                                 phydev->adjust_link(phydev->attached_dev);
 907                         }
 908                         break;
 909         }
 910
 911         mutex_unlock(&phydev->lock);
 912
 913         if (needs_aneg)
 914                 err = phy_start_aneg(phydev);
 915
 916         if (err < 0)
 917                 phy_error(phydev);
 918
 919         queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
 920                         PHY_STATE_TIME * HZ);
 921 }
 922
 923 void phy_mac_interrupt(struct phy_device *phydev, int new_link)
 924 {
 925         cancel_work_sync(&phydev->phy_queue);
 926         phydev->link = new_link;
 927         schedule_work(&phydev->phy_queue);
 928 }
 929 EXPORT_SYMBOL(phy_mac_interrupt);
 930
 931 static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
 932                                     int addr)
 933 {
 934         /* Write the desired MMD Devad */
 935         bus->write(bus, addr, MII_MMD_CTRL, devad);
 936
 937         /* Write the desired MMD register address */
 938         bus->write(bus, addr, MII_MMD_DATA, prtad);
 939
 940         /* Select the Function : DATA with no post increment */
 941         bus->write(bus, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
 942 }
 943
 944 /**
 945  * phy_read_mmd_indirect - reads data from the MMD registers
 946  * @bus: the target MII bus
 947  * @prtad: MMD Address
 948  * @devad: MMD DEVAD
 949  * @addr: PHY address on the MII bus
 950  *
 951  * Description: it reads data from the MMD registers (clause 22 to access to
 952  * clause 45) of the specified phy address.
 953  * To read these register we have:
 954  * 1) Write reg 13 // DEVAD
 955  * 2) Write reg 14 // MMD Address
 956  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
 957  * 3) Read  reg 14 // Read MMD data
 958  */
 959 static int phy_read_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
 960                                  int addr)
 961 {
 962         u32 ret;
 963
 964         mmd_phy_indirect(bus, prtad, devad, addr);
 965
 966         /* Read the content of the MMD's selected register */
 967         ret = bus->read(bus, addr, MII_MMD_DATA);
 968
 969         return ret;
 970 }
 971
 972 /**
 973  * phy_write_mmd_indirect - writes data to the MMD registers
 974  * @bus: the target MII bus
 975  * @prtad: MMD Address
 976  * @devad: MMD DEVAD
 977  * @addr: PHY address on the MII bus
 978  * @data: data to write in the MMD register
 979  *
 980  * Description: Write data from the MMD registers of the specified
 981  * phy address.
 982  * To write these register we have:
 983  * 1) Write reg 13 // DEVAD
 984  * 2) Write reg 14 // MMD Address
 985  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
 986  * 3) Write reg 14 // Write MMD data
 987  */
 988 static void phy_write_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
 989                                    int addr, u32 data)
 990 {
 991         mmd_phy_indirect(bus, prtad, devad, addr);
 992
 993         /* Write the data into MMD's selected register */
 994         bus->write(bus, addr, MII_MMD_DATA, data);
 995 }
 996
 997 /**
 998  * phy_init_eee - init and check the EEE feature
 999  * @phydev: target phy_device struct
1000  * @clk_stop_enable: PHY may stop the clock during LPI
1001  *
1002  * Description: it checks if the Energy-Efficient Ethernet (EEE)
1003  * is supported by looking at the MMD registers 3.20 and 7.60/61
1004  * and it programs the MMD register 3.0 setting the "Clock stop enable"
1005  * bit if required.
1006  */
1007 int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
1008 {
1009         int ret = -EPROTONOSUPPORT;
1010
1011         /* According to 802.3az,the EEE is supported only in full duplex-mode.
1012          * Also EEE feature is active when core is operating with MII, GMII
1013          * or RGMII.
1014          */
1015         if ((phydev->duplex == DUPLEX_FULL) &&
1016             ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
1017             (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
1018             (phydev->interface == PHY_INTERFACE_MODE_RGMII))) {
1019                 int eee_lp, eee_cap, eee_adv;
1020                 u32 lp, cap, adv;
1021                 int idx, status;
1022
1023                 /* Read phy status to properly get the right settings */
1024                 status = phy_read_status(phydev);
1025                 if (status)
1026                         return status;
1027
1028                 /* First check if the EEE ability is supported */
1029                 eee_cap = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE,
1030                                                 MDIO_MMD_PCS, phydev->addr);
1031                 if (eee_cap < 0)
1032                         return eee_cap;
1033
1034                 cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
1035                 if (!cap)
1036                         goto eee_exit;
1037
1038                 /* Check which link settings negotiated and verify it in
1039                  * the EEE advertising registers.
1040                  */
1041                 eee_lp = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE,
1042                                                MDIO_MMD_AN, phydev->addr);
1043                 if (eee_lp < 0)
1044                         return eee_lp;
1045
1046                 eee_adv = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV,
1047                                                 MDIO_MMD_AN, phydev->addr);
1048                 if (eee_adv < 0)
1049                         return eee_adv;
1050
1051                 adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
1052                 lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
1053                 idx = phy_find_setting(phydev->speed, phydev->duplex);
1054                 if (!(lp & adv & settings[idx].setting))
1055                         goto eee_exit;
1056
1057                 if (clk_stop_enable) {
1058                         /* Configure the PHY to stop receiving xMII
1059                          * clock while it is signaling LPI.
1060                          */
1061                         int val = phy_read_mmd_indirect(phydev->bus, MDIO_CTRL1,
1062                                                         MDIO_MMD_PCS,
1063                                                         phydev->addr);
1064                         if (val < 0)
1065                                 return val;
1066
1067                         val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
1068                         phy_write_mmd_indirect(phydev->bus, MDIO_CTRL1,
1069                                                MDIO_MMD_PCS, phydev->addr, val);
1070                 }
1071
1072                 ret = 0; /* EEE supported */
1073         }
1074
1075 eee_exit:
1076         return ret;
1077 }
1078 EXPORT_SYMBOL(phy_init_eee);
1079
1080 /**
1081  * phy_get_eee_err - report the EEE wake error count
1082  * @phydev: target phy_device struct
1083  *
1084  * Description: it is to report the number of time where the PHY
1085  * failed to complete its normal wake sequence.
1086  */
1087 int phy_get_eee_err(struct phy_device *phydev)
1088 {
1089         return phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_WK_ERR,
1090                                      MDIO_MMD_PCS, phydev->addr);
1091
1092 }
1093 EXPORT_SYMBOL(phy_get_eee_err);
1094
1095 /**
1096  * phy_ethtool_get_eee - get EEE supported and status
1097  * @phydev: target phy_device struct
1098  * @data: ethtool_eee data
1099  *
1100  * Description: it reportes the Supported/Advertisement/LP Advertisement
1101  * capabilities.
1102  */
1103 int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
1104 {
1105         int val;
1106
1107         /* Get Supported EEE */
1108         val = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE,
1109                                     MDIO_MMD_PCS, phydev->addr);
1110         if (val < 0)
1111                 return val;
1112         data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
1113
1114         /* Get advertisement EEE */
1115         val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV,
1116                                     MDIO_MMD_AN, phydev->addr);
1117         if (val < 0)
1118                 return val;
1119         data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
1120
1121         /* Get LP advertisement EEE */
1122         val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE,
1123                                     MDIO_MMD_AN, phydev->addr);
1124         if (val < 0)
1125                 return val;
1126         data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
1127
1128         return 0;
1129 }
1130 EXPORT_SYMBOL(phy_ethtool_get_eee);
1131
1132 /**
1133  * phy_ethtool_set_eee - set EEE supported and status
1134  * @phydev: target phy_device struct
1135  * @data: ethtool_eee data
1136  *
1137  * Description: it is to program the Advertisement EEE register.
1138  */
1139 int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
1140 {
1141         int val;
1142
1143         val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
1144         phy_write_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
1145                                phydev->addr, val);
1146
1147         return 0;
1148 }
1149 EXPORT_SYMBOL(phy_ethtool_set_eee);
1150
1151 int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
1152 {
1153         if (phydev->drv->set_wol)
1154                 return phydev->drv->set_wol(phydev, wol);
1155
1156         return -EOPNOTSUPP;
1157 }
1158 EXPORT_SYMBOL(phy_ethtool_set_wol);
1159
1160 void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
1161 {
1162         if (phydev->drv->get_wol)
1163                 phydev->drv->get_wol(phydev, wol);
1164 }
1165 EXPORT_SYMBOL(phy_ethtool_get_wol);