drivers/net/phy/phy.c

   1 /*
   2  * drivers/net/phy/phy.c
   3  *
   4  * Framework for configuring and reading PHY devices
   5  * Based on code in sungem_phy.c and gianfar_phy.c
   6  *
   7  * Author: Andy Fleming
   8  *
   9  * Copyright (c) 2004 Freescale Semiconductor, Inc.
  10  * Copyright (c) 2006, 2007  Maciej W. Rozycki
  11  *
  12  * This program is free software; you can redistribute  it and/or modify it
  13  * under  the terms of  the GNU General  Public License as published by the
  14  * Free Software Foundation;  either version 2 of the  License, or (at your
  15  * option) any later version.
  16  *
  17  */
  18
  19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  20
  21 #include <linux/kernel.h>
  22 #include <linux/string.h>
  23 #include <linux/errno.h>
  24 #include <linux/unistd.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/init.h>
  27 #include <linux/delay.h>
  28 #include <linux/netdevice.h>
  29 #include <linux/etherdevice.h>
  30 #include <linux/skbuff.h>
  31 #include <linux/mm.h>
  32 #include <linux/module.h>
  33 #include <linux/mii.h>
  34 #include <linux/ethtool.h>
  35 #include <linux/phy.h>
  36 #include <linux/timer.h>
  37 #include <linux/workqueue.h>
  38 #include <linux/mdio.h>
  39
  40 #include <linux/atomic.h>
  41 #include <asm/io.h>
  42 #include <asm/irq.h>
  43 #include <asm/uaccess.h>
  44
  45 /**
  46  * phy_print_status - Convenience function to print out the current phy status
  47  * @phydev: the phy_device struct
  48  */
  49 void phy_print_status(struct phy_device *phydev)
  50 {
  51         if (phydev->link)
  52                 pr_info("%s - Link is Up - %d/%s\n",
  53                         dev_name(&phydev->dev),
  54                         phydev->speed,
  55                         DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
  56         else
  57                 pr_info("%s - Link is Down\n", dev_name(&phydev->dev));
  58 }
  59 EXPORT_SYMBOL(phy_print_status);
  60
  61 /**
  62  * phy_clear_interrupt - Ack the phy device's interrupt
  63  * @phydev: the phy_device struct
  64  *
  65  * If the @phydev driver has an ack_interrupt function, call it to
  66  * ack and clear the phy device's interrupt.
  67  *
  68  * Returns 0 on success on < 0 on error.
  69  */
  70 static int phy_clear_interrupt(struct phy_device *phydev)
  71 {
  72         int err = 0;
  73
  74         if (phydev->drv->ack_interrupt)
  75                 err = phydev->drv->ack_interrupt(phydev);
  76
  77         return err;
  78 }
  79
  80 /**
  81  * phy_config_interrupt - configure the PHY device for the requested interrupts
  82  * @phydev: the phy_device struct
  83  * @interrupts: interrupt flags to configure for this @phydev
  84  *
  85  * Returns 0 on success on < 0 on error.
  86  */
  87 static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
  88 {
  89         int err = 0;
  90
  91         phydev->interrupts = interrupts;
  92         if (phydev->drv->config_intr)
  93                 err = phydev->drv->config_intr(phydev);
  94
  95         return err;
  96 }
  97
  98
  99 /**
 100  * phy_aneg_done - return auto-negotiation status
 101  * @phydev: target phy_device struct
 102  *
 103  * Description: Reads the status register and returns 0 either if
 104  *   auto-negotiation is incomplete, or if there was an error.
 105  *   Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
 106  */
 107 static inline int phy_aneg_done(struct phy_device *phydev)
 108 {
 109         int retval;
 110
 111         retval = phy_read(phydev, MII_BMSR);
 112
 113         return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
 114 }
 115
 116 /* A structure for mapping a particular speed and duplex
 117  * combination to a particular SUPPORTED and ADVERTISED value */
 118 struct phy_setting {
 119         int speed;
 120         int duplex;
 121         u32 setting;
 122 };
 123
 124 /* A mapping of all SUPPORTED settings to speed/duplex */
 125 static const struct phy_setting settings[] = {
 126         {
 127                 .speed = 10000,
 128                 .duplex = DUPLEX_FULL,
 129                 .setting = SUPPORTED_10000baseT_Full,
 130         },
 131         {
 132                 .speed = SPEED_1000,
 133                 .duplex = DUPLEX_FULL,
 134                 .setting = SUPPORTED_1000baseT_Full,
 135         },
 136         {
 137                 .speed = SPEED_1000,
 138                 .duplex = DUPLEX_HALF,
 139                 .setting = SUPPORTED_1000baseT_Half,
 140         },
 141         {
 142                 .speed = SPEED_100,
 143                 .duplex = DUPLEX_FULL,
 144                 .setting = SUPPORTED_100baseT_Full,
 145         },
 146         {
 147                 .speed = SPEED_100,
 148                 .duplex = DUPLEX_HALF,
 149                 .setting = SUPPORTED_100baseT_Half,
 150         },
 151         {
 152                 .speed = SPEED_10,
 153                 .duplex = DUPLEX_FULL,
 154                 .setting = SUPPORTED_10baseT_Full,
 155         },
 156         {
 157                 .speed = SPEED_10,
 158                 .duplex = DUPLEX_HALF,
 159                 .setting = SUPPORTED_10baseT_Half,
 160         },
 161 };
 162
 163 #define MAX_NUM_SETTINGS ARRAY_SIZE(settings)
 164
 165 /**
 166  * phy_find_setting - find a PHY settings array entry that matches speed & duplex
 167  * @speed: speed to match
 168  * @duplex: duplex to match
 169  *
 170  * Description: Searches the settings array for the setting which
 171  *   matches the desired speed and duplex, and returns the index
 172  *   of that setting.  Returns the index of the last setting if
 173  *   none of the others match.
 174  */
 175 static inline int phy_find_setting(int speed, int duplex)
 176 {
 177         int idx = 0;
 178
 179         while (idx < ARRAY_SIZE(settings) &&
 180                         (settings[idx].speed != speed ||
 181                         settings[idx].duplex != duplex))
 182                 idx++;
 183
 184         return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
 185 }
 186
 187 /**
 188  * phy_find_valid - find a PHY setting that matches the requested features mask
 189  * @idx: The first index in settings[] to search
 190  * @features: A mask of the valid settings
 191  *
 192  * Description: Returns the index of the first valid setting less
 193  *   than or equal to the one pointed to by idx, as determined by
 194  *   the mask in features.  Returns the index of the last setting
 195  *   if nothing else matches.
 196  */
 197 static inline int phy_find_valid(int idx, u32 features)
 198 {
 199         while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features))
 200                 idx++;
 201
 202         return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
 203 }
 204
 205 /**
 206  * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
 207  * @phydev: the target phy_device struct
 208  *
 209  * Description: Make sure the PHY is set to supported speeds and
 210  *   duplexes.  Drop down by one in this order:  1000/FULL,
 211  *   1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
 212  */
 213 static void phy_sanitize_settings(struct phy_device *phydev)
 214 {
 215         u32 features = phydev->supported;
 216         int idx;
 217
 218         /* Sanitize settings based on PHY capabilities */
 219         if ((features & SUPPORTED_Autoneg) == 0)
 220                 phydev->autoneg = AUTONEG_DISABLE;
 221
 222         idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
 223                         features);
 224
 225         phydev->speed = settings[idx].speed;
 226         phydev->duplex = settings[idx].duplex;
 227 }
 228
 229 /**
 230  * phy_ethtool_sset - generic ethtool sset function, handles all the details
 231  * @phydev: target phy_device struct
 232  * @cmd: ethtool_cmd
 233  *
 234  * A few notes about parameter checking:
 235  * - We don't set port or transceiver, so we don't care what they
 236  *   were set to.
 237  * - phy_start_aneg() will make sure forced settings are sane, and
 238  *   choose the next best ones from the ones selected, so we don't
 239  *   care if ethtool tries to give us bad values.
 240  */
 241 int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 242 {
 243         u32 speed = ethtool_cmd_speed(cmd);
 244
 245         if (cmd->phy_address != phydev->addr)
 246                 return -EINVAL;
 247
 248         /* We make sure that we don't pass unsupported
 249          * values in to the PHY */
 250         cmd->advertising &= phydev->supported;
 251
 252         /* Verify the settings we care about. */
 253         if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
 254                 return -EINVAL;
 255
 256         if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
 257                 return -EINVAL;
 258
 259         if (cmd->autoneg == AUTONEG_DISABLE &&
 260             ((speed != SPEED_1000 &&
 261               speed != SPEED_100 &&
 262               speed != SPEED_10) ||
 263              (cmd->duplex != DUPLEX_HALF &&
 264               cmd->duplex != DUPLEX_FULL)))
 265                 return -EINVAL;
 266
 267         phydev->autoneg = cmd->autoneg;
 268
 269         phydev->speed = speed;
 270
 271         phydev->advertising = cmd->advertising;
 272
 273         if (AUTONEG_ENABLE == cmd->autoneg)
 274                 phydev->advertising |= ADVERTISED_Autoneg;
 275         else
 276                 phydev->advertising &= ~ADVERTISED_Autoneg;
 277
 278         phydev->duplex = cmd->duplex;
 279
 280         /* Restart the PHY */
 281         phy_start_aneg(phydev);
 282
 283         return 0;
 284 }
 285 EXPORT_SYMBOL(phy_ethtool_sset);
 286
 287 int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 288 {
 289         cmd->supported = phydev->supported;
 290
 291         cmd->advertising = phydev->advertising;
 292
 293         ethtool_cmd_speed_set(cmd, phydev->speed);
 294         cmd->duplex = phydev->duplex;
 295         cmd->port = PORT_MII;
 296         cmd->phy_address = phydev->addr;
 297         cmd->transceiver = XCVR_EXTERNAL;
 298         cmd->autoneg = phydev->autoneg;
 299
 300         return 0;
 301 }
 302 EXPORT_SYMBOL(phy_ethtool_gset);
 303
 304 /**
 305  * phy_mii_ioctl - generic PHY MII ioctl interface
 306  * @phydev: the phy_device struct
 307  * @ifr: &struct ifreq for socket ioctl's
 308  * @cmd: ioctl cmd to execute
 309  *
 310  * Note that this function is currently incompatible with the
 311  * PHYCONTROL layer.  It changes registers without regard to
 312  * current state.  Use at own risk.
 313  */
 314 int phy_mii_ioctl(struct phy_device *phydev,
 315                 struct ifreq *ifr, int cmd)
 316 {
 317         struct mii_ioctl_data *mii_data = if_mii(ifr);
 318         u16 val = mii_data->val_in;
 319
 320         switch (cmd) {
 321         case SIOCGMIIPHY:
 322                 mii_data->phy_id = phydev->addr;
 323                 /* fall through */
 324
 325         case SIOCGMIIREG:
 326                 mii_data->val_out = mdiobus_read(phydev->bus, mii_data->phy_id,
 327                                                  mii_data->reg_num);
 328                 break;
 329
 330         case SIOCSMIIREG:
 331                 if (mii_data->phy_id == phydev->addr) {
 332                         switch(mii_data->reg_num) {
 333                         case MII_BMCR:
 334                                 if ((val & (BMCR_RESET|BMCR_ANENABLE)) == 0)
 335                                         phydev->autoneg = AUTONEG_DISABLE;
 336                                 else
 337                                         phydev->autoneg = AUTONEG_ENABLE;
 338                                 if ((!phydev->autoneg) && (val & BMCR_FULLDPLX))
 339                                         phydev->duplex = DUPLEX_FULL;
 340                                 else
 341                                         phydev->duplex = DUPLEX_HALF;
 342                                 if ((!phydev->autoneg) &&
 343                                                 (val & BMCR_SPEED1000))
 344                                         phydev->speed = SPEED_1000;
 345                                 else if ((!phydev->autoneg) &&
 346                                                 (val & BMCR_SPEED100))
 347                                         phydev->speed = SPEED_100;
 348                                 break;
 349                         case MII_ADVERTISE:
 350                                 phydev->advertising = val;
 351                                 break;
 352                         default:
 353                                 /* do nothing */
 354                                 break;
 355                         }
 356                 }
 357
 358                 mdiobus_write(phydev->bus, mii_data->phy_id,
 359                               mii_data->reg_num, val);
 360
 361                 if (mii_data->reg_num == MII_BMCR &&
 362                     val & BMCR_RESET &&
 363                     phydev->drv->config_init) {
 364                         phy_scan_fixups(phydev);
 365                         phydev->drv->config_init(phydev);
 366                 }
 367                 break;
 368
 369         case SIOCSHWTSTAMP:
 370                 if (phydev->drv->hwtstamp)
 371                         return phydev->drv->hwtstamp(phydev, ifr);
 372                 /* fall through */
 373
 374         default:
 375                 return -EOPNOTSUPP;
 376         }
 377
 378         return 0;
 379 }
 380 EXPORT_SYMBOL(phy_mii_ioctl);
 381
 382 /**
 383  * phy_start_aneg - start auto-negotiation for this PHY device
 384  * @phydev: the phy_device struct
 385  *
 386  * Description: Sanitizes the settings (if we're not autonegotiating
 387  *   them), and then calls the driver's config_aneg function.
 388  *   If the PHYCONTROL Layer is operating, we change the state to
 389  *   reflect the beginning of Auto-negotiation or forcing.
 390  */
 391 int phy_start_aneg(struct phy_device *phydev)
 392 {
 393         int err;
 394
 395         mutex_lock(&phydev->lock);
 396
 397         if (AUTONEG_DISABLE == phydev->autoneg)
 398                 phy_sanitize_settings(phydev);
 399
 400         err = phydev->drv->config_aneg(phydev);
 401
 402         if (err < 0)
 403                 goto out_unlock;
 404
 405         if (phydev->state != PHY_HALTED) {
 406                 if (AUTONEG_ENABLE == phydev->autoneg) {
 407                         phydev->state = PHY_AN;
 408                         phydev->link_timeout = PHY_AN_TIMEOUT;
 409                 } else {
 410                         phydev->state = PHY_FORCING;
 411                         phydev->link_timeout = PHY_FORCE_TIMEOUT;
 412                 }
 413         }
 414
 415 out_unlock:
 416         mutex_unlock(&phydev->lock);
 417         return err;
 418 }
 419 EXPORT_SYMBOL(phy_start_aneg);
 420
 421
 422 static void phy_change(struct work_struct *work);
 423
 424 /**
 425  * phy_start_machine - start PHY state machine tracking
 426  * @phydev: the phy_device struct
 427  * @handler: callback function for state change notifications
 428  *
 429  * Description: The PHY infrastructure can run a state machine
 430  *   which tracks whether the PHY is starting up, negotiating,
 431  *   etc.  This function starts the timer which tracks the state
 432  *   of the PHY.  If you want to be notified when the state changes,
 433  *   pass in the callback @handler, otherwise, pass NULL.  If you
 434  *   want to maintain your own state machine, do not call this
 435  *   function.
 436  */
 437 void phy_start_machine(struct phy_device *phydev,
 438                 void (*handler)(struct net_device *))
 439 {
 440         phydev->adjust_state = handler;
 441
 442         queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, HZ);
 443 }
 444
 445 /**
 446  * phy_stop_machine - stop the PHY state machine tracking
 447  * @phydev: target phy_device struct
 448  *
 449  * Description: Stops the state machine timer, sets the state to UP
 450  *   (unless it wasn't up yet). This function must be called BEFORE
 451  *   phy_detach.
 452  */
 453 void phy_stop_machine(struct phy_device *phydev)
 454 {
 455         cancel_delayed_work_sync(&phydev->state_queue);
 456
 457         mutex_lock(&phydev->lock);
 458         if (phydev->state > PHY_UP)
 459                 phydev->state = PHY_UP;
 460         mutex_unlock(&phydev->lock);
 461
 462         phydev->adjust_state = NULL;
 463 }
 464
 465 /**
 466  * phy_error - enter HALTED state for this PHY device
 467  * @phydev: target phy_device struct
 468  *
 469  * Moves the PHY to the HALTED state in response to a read
 470  * or write error, and tells the controller the link is down.
 471  * Must not be called from interrupt context, or while the
 472  * phydev->lock is held.
 473  */
 474 static void phy_error(struct phy_device *phydev)
 475 {
 476         mutex_lock(&phydev->lock);
 477         phydev->state = PHY_HALTED;
 478         mutex_unlock(&phydev->lock);
 479 }
 480
 481 /**
 482  * phy_interrupt - PHY interrupt handler
 483  * @irq: interrupt line
 484  * @phy_dat: phy_device pointer
 485  *
 486  * Description: When a PHY interrupt occurs, the handler disables
 487  * interrupts, and schedules a work task to clear the interrupt.
 488  */
 489 static irqreturn_t phy_interrupt(int irq, void *phy_dat)
 490 {
 491         struct phy_device *phydev = phy_dat;
 492
 493         if (PHY_HALTED == phydev->state)
 494                 return IRQ_NONE;                /* It can't be ours.  */
 495
 496         /* The MDIO bus is not allowed to be written in interrupt
 497          * context, so we need to disable the irq here.  A work
 498          * queue will write the PHY to disable and clear the
 499          * interrupt, and then reenable the irq line. */
 500         disable_irq_nosync(irq);
 501         atomic_inc(&phydev->irq_disable);
 502
 503         queue_work(system_power_efficient_wq, &phydev->phy_queue);
 504
 505         return IRQ_HANDLED;
 506 }
 507
 508 /**
 509  * phy_enable_interrupts - Enable the interrupts from the PHY side
 510  * @phydev: target phy_device struct
 511  */
 512 static int phy_enable_interrupts(struct phy_device *phydev)
 513 {
 514         int err;
 515
 516         err = phy_clear_interrupt(phydev);
 517
 518         if (err < 0)
 519                 return err;
 520
 521         err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
 522
 523         return err;
 524 }
 525
 526 /**
 527  * phy_disable_interrupts - Disable the PHY interrupts from the PHY side
 528  * @phydev: target phy_device struct
 529  */
 530 static int phy_disable_interrupts(struct phy_device *phydev)
 531 {
 532         int err;
 533
 534         /* Disable PHY interrupts */
 535         err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
 536
 537         if (err)
 538                 goto phy_err;
 539
 540         /* Clear the interrupt */
 541         err = phy_clear_interrupt(phydev);
 542
 543         if (err)
 544                 goto phy_err;
 545
 546         return 0;
 547
 548 phy_err:
 549         phy_error(phydev);
 550
 551         return err;
 552 }
 553
 554 /**
 555  * phy_start_interrupts - request and enable interrupts for a PHY device
 556  * @phydev: target phy_device struct
 557  *
 558  * Description: Request the interrupt for the given PHY.
 559  *   If this fails, then we set irq to PHY_POLL.
 560  *   Otherwise, we enable the interrupts in the PHY.
 561  *   This should only be called with a valid IRQ number.
 562  *   Returns 0 on success or < 0 on error.
 563  */
 564 int phy_start_interrupts(struct phy_device *phydev)
 565 {
 566         int err = 0;
 567
 568         INIT_WORK(&phydev->phy_queue, phy_change);
 569
 570         atomic_set(&phydev->irq_disable, 0);
 571         if (request_irq(phydev->irq, phy_interrupt,
 572                                 IRQF_SHARED,
 573                                 "phy_interrupt",
 574                                 phydev) < 0) {
 575                 pr_warn("%s: Can't get IRQ %d (PHY)\n",
 576                         phydev->bus->name, phydev->irq);
 577                 phydev->irq = PHY_POLL;
 578                 return 0;
 579         }
 580
 581         err = phy_enable_interrupts(phydev);
 582
 583         return err;
 584 }
 585 EXPORT_SYMBOL(phy_start_interrupts);
 586
 587 /**
 588  * phy_stop_interrupts - disable interrupts from a PHY device
 589  * @phydev: target phy_device struct
 590  */
 591 int phy_stop_interrupts(struct phy_device *phydev)
 592 {
 593         int err;
 594
 595         err = phy_disable_interrupts(phydev);
 596
 597         if (err)
 598                 phy_error(phydev);
 599
 600         free_irq(phydev->irq, phydev);
 601
 602         /*
 603          * Cannot call flush_scheduled_work() here as desired because
 604          * of rtnl_lock(), but we do not really care about what would
 605          * be done, except from enable_irq(), so cancel any work
 606          * possibly pending and take care of the matter below.
 607          */
 608         cancel_work_sync(&phydev->phy_queue);
 609         /*
 610          * If work indeed has been cancelled, disable_irq() will have
 611          * been left unbalanced from phy_interrupt() and enable_irq()
 612          * has to be called so that other devices on the line work.
 613          */
 614         while (atomic_dec_return(&phydev->irq_disable) >= 0)
 615                 enable_irq(phydev->irq);
 616
 617         return err;
 618 }
 619 EXPORT_SYMBOL(phy_stop_interrupts);
 620
 621
 622 /**
 623  * phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes
 624  * @work: work_struct that describes the work to be done
 625  */
 626 static void phy_change(struct work_struct *work)
 627 {
 628         int err;
 629         struct phy_device *phydev =
 630                 container_of(work, struct phy_device, phy_queue);
 631
 632         if (phydev->drv->did_interrupt &&
 633             !phydev->drv->did_interrupt(phydev))
 634                 goto ignore;
 635
 636         err = phy_disable_interrupts(phydev);
 637
 638         if (err)
 639                 goto phy_err;
 640
 641         mutex_lock(&phydev->lock);
 642         if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
 643                 phydev->state = PHY_CHANGELINK;
 644         mutex_unlock(&phydev->lock);
 645
 646         atomic_dec(&phydev->irq_disable);
 647         enable_irq(phydev->irq);
 648
 649         /* Reenable interrupts */
 650         if (PHY_HALTED != phydev->state)
 651                 err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
 652
 653         if (err)
 654                 goto irq_enable_err;
 655
 656         /* reschedule state queue work to run as soon as possible */
 657         cancel_delayed_work_sync(&phydev->state_queue);
 658         queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, 0);
 659
 660         return;
 661
 662 ignore:
 663         atomic_dec(&phydev->irq_disable);
 664         enable_irq(phydev->irq);
 665         return;
 666
 667 irq_enable_err:
 668         disable_irq(phydev->irq);
 669         atomic_inc(&phydev->irq_disable);
 670 phy_err:
 671         phy_error(phydev);
 672 }
 673
 674 /**
 675  * phy_stop - Bring down the PHY link, and stop checking the status
 676  * @phydev: target phy_device struct
 677  */
 678 void phy_stop(struct phy_device *phydev)
 679 {
 680         mutex_lock(&phydev->lock);
 681
 682         if (PHY_HALTED == phydev->state)
 683                 goto out_unlock;
 684
 685         if (phydev->irq != PHY_POLL) {
 686                 /* Disable PHY Interrupts */
 687                 phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
 688
 689                 /* Clear any pending interrupts */
 690                 phy_clear_interrupt(phydev);
 691         }
 692
 693         phydev->state = PHY_HALTED;
 694
 695 out_unlock:
 696         mutex_unlock(&phydev->lock);
 697
 698         /*
 699          * Cannot call flush_scheduled_work() here as desired because
 700          * of rtnl_lock(), but PHY_HALTED shall guarantee phy_change()
 701          * will not reenable interrupts.
 702          */
 703 }
 704
 705
 706 /**
 707  * phy_start - start or restart a PHY device
 708  * @phydev: target phy_device struct
 709  *
 710  * Description: Indicates the attached device's readiness to
 711  *   handle PHY-related work.  Used during startup to start the
 712  *   PHY, and after a call to phy_stop() to resume operation.
 713  *   Also used to indicate the MDIO bus has cleared an error
 714  *   condition.
 715  */
 716 void phy_start(struct phy_device *phydev)
 717 {
 718         mutex_lock(&phydev->lock);
 719
 720         switch (phydev->state) {
 721                 case PHY_STARTING:
 722                         phydev->state = PHY_PENDING;
 723                         break;
 724                 case PHY_READY:
 725                         phydev->state = PHY_UP;
 726                         break;
 727                 case PHY_HALTED:
 728                         phydev->state = PHY_RESUMING;
 729                 default:
 730                         break;
 731         }
 732         mutex_unlock(&phydev->lock);
 733 }
 734 EXPORT_SYMBOL(phy_stop);
 735 EXPORT_SYMBOL(phy_start);
 736
 737 /**
 738  * phy_state_machine - Handle the state machine
 739  * @work: work_struct that describes the work to be done
 740  */
 741 void phy_state_machine(struct work_struct *work)
 742 {
 743         struct delayed_work *dwork = to_delayed_work(work);
 744         struct phy_device *phydev =
 745                         container_of(dwork, struct phy_device, state_queue);
 746         int needs_aneg = 0;
 747         int err = 0;
 748
 749         mutex_lock(&phydev->lock);
 750
 751         if (phydev->adjust_state)
 752                 phydev->adjust_state(phydev->attached_dev);
 753
 754         switch(phydev->state) {
 755                 case PHY_DOWN:
 756                 case PHY_STARTING:
 757                 case PHY_READY:
 758                 case PHY_PENDING:
 759                         break;
 760                 case PHY_UP:
 761                         needs_aneg = 1;
 762
 763                         phydev->link_timeout = PHY_AN_TIMEOUT;
 764
 765                         break;
 766                 case PHY_AN:
 767                         err = phy_read_status(phydev);
 768
 769                         if (err < 0)
 770                                 break;
 771
 772                         /* If the link is down, give up on
 773                          * negotiation for now */
 774                         if (!phydev->link) {
 775                                 phydev->state = PHY_NOLINK;
 776                                 netif_carrier_off(phydev->attached_dev);
 777                                 phydev->adjust_link(phydev->attached_dev);
 778                                 break;
 779                         }
 780
 781                         /* Check if negotiation is done.  Break
 782                          * if there's an error */
 783                         err = phy_aneg_done(phydev);
 784                         if (err < 0)
 785                                 break;
 786
 787                         /* If AN is done, we're running */
 788                         if (err > 0) {
 789                                 phydev->state = PHY_RUNNING;
 790                                 netif_carrier_on(phydev->attached_dev);
 791                                 phydev->adjust_link(phydev->attached_dev);
 792
 793                         } else if (0 == phydev->link_timeout--) {
 794                                 needs_aneg = 1;
 795                                 /* If we have the magic_aneg bit,
 796                                  * we try again */
 797                                 if (phydev->drv->flags & PHY_HAS_MAGICANEG)
 798                                         break;
 799                         }
 800                         break;
 801                 case PHY_NOLINK:
 802                         err = phy_read_status(phydev);
 803
 804                         if (err)
 805                                 break;
 806
 807                         if (phydev->link) {
 808                                 phydev->state = PHY_RUNNING;
 809                                 netif_carrier_on(phydev->attached_dev);
 810                                 phydev->adjust_link(phydev->attached_dev);
 811                         }
 812                         break;
 813                 case PHY_FORCING:
 814                         err = genphy_update_link(phydev);
 815
 816                         if (err)
 817                                 break;
 818
 819                         if (phydev->link) {
 820                                 phydev->state = PHY_RUNNING;
 821                                 netif_carrier_on(phydev->attached_dev);
 822                         } else {
 823                                 if (0 == phydev->link_timeout--)
 824                                         needs_aneg = 1;
 825                         }
 826
 827                         phydev->adjust_link(phydev->attached_dev);
 828                         break;
 829                 case PHY_RUNNING:
 830                         /* Only register a CHANGE if we are
 831                          * polling */
 832                         if (PHY_POLL == phydev->irq)
 833                                 phydev->state = PHY_CHANGELINK;
 834                         break;
 835                 case PHY_CHANGELINK:
 836                         err = phy_read_status(phydev);
 837
 838                         if (err)
 839                                 break;
 840
 841                         if (phydev->link) {
 842                                 phydev->state = PHY_RUNNING;
 843                                 netif_carrier_on(phydev->attached_dev);
 844                         } else {
 845                                 phydev->state = PHY_NOLINK;
 846                                 netif_carrier_off(phydev->attached_dev);
 847                         }
 848
 849                         phydev->adjust_link(phydev->attached_dev);
 850
 851                         if (PHY_POLL != phydev->irq)
 852                                 err = phy_config_interrupt(phydev,
 853                                                 PHY_INTERRUPT_ENABLED);
 854                         break;
 855                 case PHY_HALTED:
 856                         if (phydev->link) {
 857                                 phydev->link = 0;
 858                                 netif_carrier_off(phydev->attached_dev);
 859                                 phydev->adjust_link(phydev->attached_dev);
 860                         }
 861                         break;
 862                 case PHY_RESUMING:
 863
 864                         err = phy_clear_interrupt(phydev);
 865
 866                         if (err)
 867                                 break;
 868
 869                         err = phy_config_interrupt(phydev,
 870                                         PHY_INTERRUPT_ENABLED);
 871
 872                         if (err)
 873                                 break;
 874
 875                         if (AUTONEG_ENABLE == phydev->autoneg) {
 876                                 err = phy_aneg_done(phydev);
 877                                 if (err < 0)
 878                                         break;
 879
 880                                 /* err > 0 if AN is done.
 881                                  * Otherwise, it's 0, and we're
 882                                  * still waiting for AN */
 883                                 if (err > 0) {
 884                                         err = phy_read_status(phydev);
 885                                         if (err)
 886                                                 break;
 887
 888                                         if (phydev->link) {
 889                                                 phydev->state = PHY_RUNNING;
 890                                                 netif_carrier_on(phydev->attached_dev);
 891                                         } else
 892                                                 phydev->state = PHY_NOLINK;
 893                                         phydev->adjust_link(phydev->attached_dev);
 894                                 } else {
 895                                         phydev->state = PHY_AN;
 896                                         phydev->link_timeout = PHY_AN_TIMEOUT;
 897                                 }
 898                         } else {
 899                                 err = phy_read_status(phydev);
 900                                 if (err)
 901                                         break;
 902
 903                                 if (phydev->link) {
 904                                         phydev->state = PHY_RUNNING;
 905                                         netif_carrier_on(phydev->attached_dev);
 906                                 } else
 907                                         phydev->state = PHY_NOLINK;
 908                                 phydev->adjust_link(phydev->attached_dev);
 909                         }
 910                         break;
 911         }
 912
 913         mutex_unlock(&phydev->lock);
 914
 915         if (needs_aneg)
 916                 err = phy_start_aneg(phydev);
 917
 918         if (err < 0)
 919                 phy_error(phydev);
 920
 921         queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
 922                         PHY_STATE_TIME * HZ);
 923 }
 924
 925 static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
 926                                     int addr)
 927 {
 928         /* Write the desired MMD Devad */
 929         bus->write(bus, addr, MII_MMD_CTRL, devad);
 930
 931         /* Write the desired MMD register address */
 932         bus->write(bus, addr, MII_MMD_DATA, prtad);
 933
 934         /* Select the Function : DATA with no post increment */
 935         bus->write(bus, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
 936 }
 937
 938 /**
 939  * phy_read_mmd_indirect - reads data from the MMD registers
 940  * @bus: the target MII bus
 941  * @prtad: MMD Address
 942  * @devad: MMD DEVAD
 943  * @addr: PHY address on the MII bus
 944  *
 945  * Description: it reads data from the MMD registers (clause 22 to access to
 946  * clause 45) of the specified phy address.
 947  * To read these register we have:
 948  * 1) Write reg 13 // DEVAD
 949  * 2) Write reg 14 // MMD Address
 950  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
 951  * 3) Read  reg 14 // Read MMD data
 952  */
 953 static int phy_read_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
 954                                  int addr)
 955 {
 956         u32 ret;
 957
 958         mmd_phy_indirect(bus, prtad, devad, addr);
 959
 960         /* Read the content of the MMD's selected register */
 961         ret = bus->read(bus, addr, MII_MMD_DATA);
 962
 963         return ret;
 964 }
 965
 966 /**
 967  * phy_write_mmd_indirect - writes data to the MMD registers
 968  * @bus: the target MII bus
 969  * @prtad: MMD Address
 970  * @devad: MMD DEVAD
 971  * @addr: PHY address on the MII bus
 972  * @data: data to write in the MMD register
 973  *
 974  * Description: Write data from the MMD registers of the specified
 975  * phy address.
 976  * To write these register we have:
 977  * 1) Write reg 13 // DEVAD
 978  * 2) Write reg 14 // MMD Address
 979  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
 980  * 3) Write reg 14 // Write MMD data
 981  */
 982 static void phy_write_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
 983                                    int addr, u32 data)
 984 {
 985         mmd_phy_indirect(bus, prtad, devad, addr);
 986
 987         /* Write the data into MMD's selected register */
 988         bus->write(bus, addr, MII_MMD_DATA, data);
 989 }
 990
 991 /**
 992  * phy_init_eee - init and check the EEE feature
 993  * @phydev: target phy_device struct
 994  * @clk_stop_enable: PHY may stop the clock during LPI
 995  *
 996  * Description: it checks if the Energy-Efficient Ethernet (EEE)
 997  * is supported by looking at the MMD registers 3.20 and 7.60/61
 998  * and it programs the MMD register 3.0 setting the "Clock stop enable"
 999  * bit if required.
1000  */
1001 int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
1002 {
1003         int ret = -EPROTONOSUPPORT;
1004
1005         /* According to 802.3az,the EEE is supported only in full duplex-mode.
1006          * Also EEE feature is active when core is operating with MII, GMII
1007          * or RGMII.
1008          */
1009         if ((phydev->duplex == DUPLEX_FULL) &&
1010             ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
1011             (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
1012             (phydev->interface == PHY_INTERFACE_MODE_RGMII))) {
1013                 int eee_lp, eee_cap, eee_adv;
1014                 u32 lp, cap, adv;
1015                 int idx, status;
1016
1017                 /* Read phy status to properly get the right settings */
1018                 status = phy_read_status(phydev);
1019                 if (status)
1020                         return status;
1021
1022                 /* First check if the EEE ability is supported */
1023                 eee_cap = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE,
1024                                                 MDIO_MMD_PCS, phydev->addr);
1025                 if (eee_cap < 0)
1026                         return eee_cap;
1027
1028                 cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
1029                 if (!cap)
1030                         goto eee_exit;
1031
1032                 /* Check which link settings negotiated and verify it in
1033                  * the EEE advertising registers.
1034                  */
1035                 eee_lp = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE,
1036                                                MDIO_MMD_AN, phydev->addr);
1037                 if (eee_lp < 0)
1038                         return eee_lp;
1039
1040                 eee_adv = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV,
1041                                                 MDIO_MMD_AN, phydev->addr);
1042                 if (eee_adv < 0)
1043                         return eee_adv;
1044
1045                 adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
1046                 lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
1047                 idx = phy_find_setting(phydev->speed, phydev->duplex);
1048                 if (!(lp & adv & settings[idx].setting))
1049                         goto eee_exit;
1050
1051                 if (clk_stop_enable) {
1052                         /* Configure the PHY to stop receiving xMII
1053                          * clock while it is signaling LPI.
1054                          */
1055                         int val = phy_read_mmd_indirect(phydev->bus, MDIO_CTRL1,
1056                                                         MDIO_MMD_PCS,
1057                                                         phydev->addr);
1058                         if (val < 0)
1059                                 return val;
1060
1061                         val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
1062                         phy_write_mmd_indirect(phydev->bus, MDIO_CTRL1,
1063                                                MDIO_MMD_PCS, phydev->addr, val);
1064                 }
1065
1066                 ret = 0; /* EEE supported */
1067         }
1068
1069 eee_exit:
1070         return ret;
1071 }
1072 EXPORT_SYMBOL(phy_init_eee);
1073
1074 /**
1075  * phy_get_eee_err - report the EEE wake error count
1076  * @phydev: target phy_device struct
1077  *
1078  * Description: it is to report the number of time where the PHY
1079  * failed to complete its normal wake sequence.
1080  */
1081 int phy_get_eee_err(struct phy_device *phydev)
1082 {
1083         return phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_WK_ERR,
1084                                      MDIO_MMD_PCS, phydev->addr);
1085
1086 }
1087 EXPORT_SYMBOL(phy_get_eee_err);
1088
1089 /**
1090  * phy_ethtool_get_eee - get EEE supported and status
1091  * @phydev: target phy_device struct
1092  * @data: ethtool_eee data
1093  *
1094  * Description: it reportes the Supported/Advertisement/LP Advertisement
1095  * capabilities.
1096  */
1097 int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
1098 {
1099         int val;
1100
1101         /* Get Supported EEE */
1102         val = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE,
1103                                     MDIO_MMD_PCS, phydev->addr);
1104         if (val < 0)
1105                 return val;
1106         data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
1107
1108         /* Get advertisement EEE */
1109         val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV,
1110                                     MDIO_MMD_AN, phydev->addr);
1111         if (val < 0)
1112                 return val;
1113         data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
1114
1115         /* Get LP advertisement EEE */
1116         val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE,
1117                                     MDIO_MMD_AN, phydev->addr);
1118         if (val < 0)
1119                 return val;
1120         data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
1121
1122         return 0;
1123 }
1124 EXPORT_SYMBOL(phy_ethtool_get_eee);
1125
1126 /**
1127  * phy_ethtool_set_eee - set EEE supported and status
1128  * @phydev: target phy_device struct
1129  * @data: ethtool_eee data
1130  *
1131  * Description: it is to program the Advertisement EEE register.
1132  */
1133 int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
1134 {
1135         int val;
1136
1137         val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
1138         phy_write_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
1139                                phydev->addr, val);
1140
1141         return 0;
1142 }
1143 EXPORT_SYMBOL(phy_ethtool_set_eee);
1144
1145 int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
1146 {
1147         if (phydev->drv->set_wol)
1148                 return phydev->drv->set_wol(phydev, wol);
1149
1150         return -EOPNOTSUPP;
1151 }
1152 EXPORT_SYMBOL(phy_ethtool_set_wol);
1153
1154 void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
1155 {
1156         if (phydev->drv->get_wol)
1157                 phydev->drv->get_wol(phydev, wol);
1158 }
1159 EXPORT_SYMBOL(phy_ethtool_get_wol);