drivers/net/wireless/at76c50x-usb.c

   1 /*
   2  * at76c503/at76c505 USB driver
   3  *
   4  * Copyright (c) 2002 - 2003 Oliver Kurth
   5  * Copyright (c) 2004 Joerg Albert <joerg.albert@gmx.de>
   6  * Copyright (c) 2004 Nick Jones
   7  * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@hotmail.com>
   8  * Copyright (c) 2007 Guido Guenther <agx@sigxcpu.org>
   9  * Copyright (c) 2007 Kalle Valo <kalle.valo@iki.fi>
  10  * Copyright (c) 2010 Sebastian Smolorz <sesmo@gmx.net>
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License as
  14  * published by the Free Software Foundation; either version 2 of
  15  * the License, or (at your option) any later version.
  16  *
  17  * This file is part of the Berlios driver for WLAN USB devices based on the
  18  * Atmel AT76C503A/505/505A.
  19  *
  20  * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed
  21  *
  22  * TODO list is at the wiki:
  23  *
  24  * http://wireless.kernel.org/en/users/Drivers/at76c50x-usb#TODO
  25  *
  26  */
  27
  28 #include <linux/init.h>
  29 #include <linux/kernel.h>
  30 #include <linux/sched.h>
  31 #include <linux/errno.h>
  32 #include <linux/slab.h>
  33 #include <linux/module.h>
  34 #include <linux/spinlock.h>
  35 #include <linux/list.h>
  36 #include <linux/usb.h>
  37 #include <linux/netdevice.h>
  38 #include <linux/if_arp.h>
  39 #include <linux/etherdevice.h>
  40 #include <linux/ethtool.h>
  41 #include <linux/wireless.h>
  42 #include <net/iw_handler.h>
  43 #include <net/ieee80211_radiotap.h>
  44 #include <linux/firmware.h>
  45 #include <linux/leds.h>
  46 #include <net/mac80211.h>
  47
  48 #include "at76c50x-usb.h"
  49
  50 /* Version information */
  51 #define DRIVER_NAME "at76c50x-usb"
  52 #define DRIVER_VERSION  "0.17"
  53 #define DRIVER_DESC "Atmel at76x USB Wireless LAN Driver"
  54
  55 /* at76_debug bits */
  56 #define DBG_PROGRESS            0x00000001      /* authentication/accociation */
  57 #define DBG_BSS_TABLE           0x00000002      /* show BSS table after scans */
  58 #define DBG_IOCTL               0x00000004      /* ioctl calls / settings */
  59 #define DBG_MAC_STATE           0x00000008      /* MAC state transitions */
  60 #define DBG_TX_DATA             0x00000010      /* tx header */
  61 #define DBG_TX_DATA_CONTENT     0x00000020      /* tx content */
  62 #define DBG_TX_MGMT             0x00000040      /* tx management */
  63 #define DBG_RX_DATA             0x00000080      /* rx data header */
  64 #define DBG_RX_DATA_CONTENT     0x00000100      /* rx data content */
  65 #define DBG_RX_MGMT             0x00000200      /* rx mgmt frame headers */
  66 #define DBG_RX_BEACON           0x00000400      /* rx beacon */
  67 #define DBG_RX_CTRL             0x00000800      /* rx control */
  68 #define DBG_RX_MGMT_CONTENT     0x00001000      /* rx mgmt content */
  69 #define DBG_RX_FRAGS            0x00002000      /* rx data fragment handling */
  70 #define DBG_DEVSTART            0x00004000      /* fw download, device start */
  71 #define DBG_URB                 0x00008000      /* rx urb status, ... */
  72 #define DBG_RX_ATMEL_HDR        0x00010000      /* Atmel-specific Rx headers */
  73 #define DBG_PROC_ENTRY          0x00020000      /* procedure entries/exits */
  74 #define DBG_PM                  0x00040000      /* power management settings */
  75 #define DBG_BSS_MATCH           0x00080000      /* BSS match failures */
  76 #define DBG_PARAMS              0x00100000      /* show configured parameters */
  77 #define DBG_WAIT_COMPLETE       0x00200000      /* command completion */
  78 #define DBG_RX_FRAGS_SKB        0x00400000      /* skb header of Rx fragments */
  79 #define DBG_BSS_TABLE_RM        0x00800000      /* purging bss table entries */
  80 #define DBG_MONITOR_MODE        0x01000000      /* monitor mode */
  81 #define DBG_MIB                 0x02000000      /* dump all MIBs on startup */
  82 #define DBG_MGMT_TIMER          0x04000000      /* dump mgmt_timer ops */
  83 #define DBG_WE_EVENTS           0x08000000      /* dump wireless events */
  84 #define DBG_FW                  0x10000000      /* firmware download */
  85 #define DBG_DFU                 0x20000000      /* device firmware upgrade */
  86 #define DBG_CMD                 0x40000000
  87 #define DBG_MAC80211            0x80000000
  88
  89 #define DBG_DEFAULTS            0
  90
  91 /* Use our own dbg macro */
  92 #define at76_dbg(bits, format, arg...)                                  \
  93 do {                                                                    \
  94         if (at76_debug & (bits))                                        \
  95                 printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \
  96 } while (0)
  97
  98 #define at76_dbg_dump(bits, buf, len, format, arg...)                   \
  99 do {                                                                    \
 100         if (at76_debug & (bits)) {                                      \
 101                 printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \
 102                 print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \
 103         }                                                               \
 104 } while (0)
 105
 106 static uint at76_debug = DBG_DEFAULTS;
 107
 108 /* Protect against concurrent firmware loading and parsing */
 109 static struct mutex fw_mutex;
 110
 111 static struct fwentry firmwares[] = {
 112         [0] = { "" },
 113         [BOARD_503_ISL3861] = { "atmel_at76c503-i3861.bin" },
 114         [BOARD_503_ISL3863] = { "atmel_at76c503-i3863.bin" },
 115         [BOARD_503] = { "atmel_at76c503-rfmd.bin" },
 116         [BOARD_503_ACC] = { "atmel_at76c503-rfmd-acc.bin" },
 117         [BOARD_505] = { "atmel_at76c505-rfmd.bin" },
 118         [BOARD_505_2958] = { "atmel_at76c505-rfmd2958.bin" },
 119         [BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" },
 120         [BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" },
 121 };
 122 MODULE_FIRMWARE("atmel_at76c503-i3861.bin");
 123 MODULE_FIRMWARE("atmel_at76c503-i3863.bin");
 124 MODULE_FIRMWARE("atmel_at76c503-rfmd.bin");
 125 MODULE_FIRMWARE("atmel_at76c503-rfmd-acc.bin");
 126 MODULE_FIRMWARE("atmel_at76c505-rfmd.bin");
 127 MODULE_FIRMWARE("atmel_at76c505-rfmd2958.bin");
 128 MODULE_FIRMWARE("atmel_at76c505a-rfmd2958.bin");
 129 MODULE_FIRMWARE("atmel_at76c505amx-rfmd.bin");
 130
 131 #define USB_DEVICE_DATA(__ops)  .driver_info = (kernel_ulong_t)(__ops)
 132
 133 static struct usb_device_id dev_table[] = {
 134         /*
 135          * at76c503-i3861
 136          */
 137         /* Generic AT76C503/3861 device */
 138         { USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 139         /* Linksys WUSB11 v2.1/v2.6 */
 140         { USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 141         /* Netgear MA101 rev. A */
 142         { USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 143         /* Tekram U300C / Allnet ALL0193 */
 144         { USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 145         /* HP HN210W J7801A */
 146         { USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 147         /* Sitecom/Z-Com/Zyxel M4Y-750 */
 148         { USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 149         /* Dynalink/Askey WLL013 (intersil) */
 150         { USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 151         /* EZ connect 11Mpbs Wireless USB Adapter SMC2662W v1 */
 152         { USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 153         /* BenQ AWL300 */
 154         { USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 155         /* Addtron AWU-120, Compex WLU11 */
 156         { USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 157         /* Intel AP310 AnyPoint II USB */
 158         { USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 159         /* Dynalink L11U */
 160         { USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 161         /* Arescom WL-210, FCC id 07J-GL2411USB */
 162         { USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 163         /* I-O DATA WN-B11/USB */
 164         { USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 165         /* BT Voyager 1010 */
 166         { USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 167         /*
 168          * at76c503-i3863
 169          */
 170         /* Generic AT76C503/3863 device */
 171         { USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863) },
 172         /* Samsung SWL-2100U */
 173         { USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863) },
 174         /*
 175          * at76c503-rfmd
 176          */
 177         /* Generic AT76C503/RFMD device */
 178         { USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503) },
 179         /* Dynalink/Askey WLL013 (rfmd) */
 180         { USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503) },
 181         /* Linksys WUSB11 v2.6 */
 182         { USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503) },
 183         /* Network Everywhere NWU11B */
 184         { USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503) },
 185         /* Netgear MA101 rev. B */
 186         { USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503) },
 187         /* D-Link DWL-120 rev. E */
 188         { USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503) },
 189         /* Actiontec 802UAT1, HWU01150-01UK */
 190         { USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503) },
 191         /* AirVast W-Buddie WN210 */
 192         { USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503) },
 193         /* Dick Smith Electronics XH1153 802.11b USB adapter */
 194         { USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503) },
 195         /* CNet CNUSB611 */
 196         { USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503) },
 197         /* FiberLine FL-WL200U */
 198         { USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503) },
 199         /* BenQ AWL400 USB stick */
 200         { USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503) },
 201         /* 3Com 3CRSHEW696 */
 202         { USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503) },
 203         /* Siemens Santis ADSL WLAN USB adapter WLL 013 */
 204         { USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503) },
 205         /* Belkin F5D6050, version 2 */
 206         { USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503) },
 207         /* iBlitzz, BWU613 (not *B or *SB) */
 208         { USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503) },
 209         /* Gigabyte GN-WLBM101 */
 210         { USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503) },
 211         /* Planex GW-US11S */
 212         { USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503) },
 213         /* Internal WLAN adapter in h5[4,5]xx series iPAQs */
 214         { USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503) },
 215         /* Corega Wireless LAN USB-11 mini */
 216         { USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503) },
 217         /* Corega Wireless LAN USB-11 mini2 */
 218         { USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503) },
 219         /* Uniden PCW100 */
 220         { USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503) },
 221         /*
 222          * at76c503-rfmd-acc
 223          */
 224         /* SMC2664W */
 225         { USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC) },
 226         /* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */
 227         { USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC) },
 228         /*
 229          * at76c505-rfmd
 230          */
 231         /* Generic AT76C505/RFMD */
 232         { USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505) },
 233         /*
 234          * at76c505-rfmd2958
 235          */
 236         /* Generic AT76C505/RFMD, OvisLink WL-1130USB */
 237         { USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
 238         /* Fiberline FL-WL240U */
 239         { USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958) },
 240         /* CNet CNUSB-611G */
 241         { USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958) },
 242         /* Linksys WUSB11 v2.8 */
 243         { USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958) },
 244         /* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */
 245         { USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958) },
 246         /* Corega WLAN USB Stick 11 */
 247         { USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
 248         /* Microstar MSI Box MS6978 */
 249         { USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958) },
 250         /*
 251          * at76c505a-rfmd2958
 252          */
 253         /* Generic AT76C505A device */
 254         { USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A) },
 255         /* Generic AT76C505AS device */
 256         { USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) },
 257         /* Siemens Gigaset USB WLAN Adapter 11 */
 258         { USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) },
 259         /* OQO Model 01+ Internal Wi-Fi */
 260         { USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) },
 261         /*
 262          * at76c505amx-rfmd
 263          */
 264         /* Generic AT76C505AMX device */
 265         { USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX) },
 266         { }
 267 };
 268
 269 MODULE_DEVICE_TABLE(usb, dev_table);
 270
 271 /* Supported rates of this hardware, bit 7 marks basic rates */
 272 static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 };
 273
 274 static const char *const preambles[] = { "long", "short", "auto" };
 275
 276 /* Firmware download */
 277 /* DFU states */
 278 #define STATE_IDLE                      0x00
 279 #define STATE_DETACH                    0x01
 280 #define STATE_DFU_IDLE                  0x02
 281 #define STATE_DFU_DOWNLOAD_SYNC         0x03
 282 #define STATE_DFU_DOWNLOAD_BUSY         0x04
 283 #define STATE_DFU_DOWNLOAD_IDLE         0x05
 284 #define STATE_DFU_MANIFEST_SYNC         0x06
 285 #define STATE_DFU_MANIFEST              0x07
 286 #define STATE_DFU_MANIFEST_WAIT_RESET   0x08
 287 #define STATE_DFU_UPLOAD_IDLE           0x09
 288 #define STATE_DFU_ERROR                 0x0a
 289
 290 /* DFU commands */
 291 #define DFU_DETACH                      0
 292 #define DFU_DNLOAD                      1
 293 #define DFU_UPLOAD                      2
 294 #define DFU_GETSTATUS                   3
 295 #define DFU_CLRSTATUS                   4
 296 #define DFU_GETSTATE                    5
 297 #define DFU_ABORT                       6
 298
 299 #define FW_BLOCK_SIZE 1024
 300
 301 struct dfu_status {
 302         unsigned char status;
 303         unsigned char poll_timeout[3];
 304         unsigned char state;
 305         unsigned char string;
 306 } __packed;
 307
 308 static inline int at76_is_intersil(enum board_type board)
 309 {
 310         return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863);
 311 }
 312
 313 static inline int at76_is_503rfmd(enum board_type board)
 314 {
 315         return (board == BOARD_503 || board == BOARD_503_ACC);
 316 }
 317
 318 static inline int at76_is_505a(enum board_type board)
 319 {
 320         return (board == BOARD_505A || board == BOARD_505AMX);
 321 }
 322
 323 /* Load a block of the first (internal) part of the firmware */
 324 static int at76_load_int_fw_block(struct usb_device *udev, int blockno,
 325                                   void *block, int size)
 326 {
 327         return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), DFU_DNLOAD,
 328                                USB_TYPE_CLASS | USB_DIR_OUT |
 329                                USB_RECIP_INTERFACE, blockno, 0, block, size,
 330                                USB_CTRL_GET_TIMEOUT);
 331 }
 332
 333 static int at76_dfu_get_status(struct usb_device *udev,
 334                                struct dfu_status *status)
 335 {
 336         int ret;
 337
 338         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATUS,
 339                               USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
 340                               0, 0, status, sizeof(struct dfu_status),
 341                               USB_CTRL_GET_TIMEOUT);
 342         return ret;
 343 }
 344
 345 static int at76_dfu_get_state(struct usb_device *udev, u8 *state)
 346 {
 347         int ret;
 348
 349         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATE,
 350                               USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
 351                               0, 0, state, 1, USB_CTRL_GET_TIMEOUT);
 352         return ret;
 353 }
 354
 355 /* Convert timeout from the DFU status to jiffies */
 356 static inline unsigned long at76_get_timeout(struct dfu_status *s)
 357 {
 358         return msecs_to_jiffies((s->poll_timeout[2] << 16)
 359                                 | (s->poll_timeout[1] << 8)
 360                                 | (s->poll_timeout[0]));
 361 }
 362
 363 /* Load internal firmware from the buffer.  If manifest_sync_timeout > 0, use
 364  * its value in jiffies in the MANIFEST_SYNC state.  */
 365 static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
 366                                 int manifest_sync_timeout)
 367 {
 368         u8 *block;
 369         struct dfu_status dfu_stat_buf;
 370         int ret = 0;
 371         int need_dfu_state = 1;
 372         int is_done = 0;
 373         u8 dfu_state = 0;
 374         u32 dfu_timeout = 0;
 375         int bsize = 0;
 376         int blockno = 0;
 377
 378         at76_dbg(DBG_DFU, "%s( %p, %u, %d)", __func__, buf, size,
 379                  manifest_sync_timeout);
 380
 381         if (!size) {
 382                 dev_err(&udev->dev, "FW buffer length invalid!\n");
 383                 return -EINVAL;
 384         }
 385
 386         block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
 387         if (!block)
 388                 return -ENOMEM;
 389
 390         do {
 391                 if (need_dfu_state) {
 392                         ret = at76_dfu_get_state(udev, &dfu_state);
 393                         if (ret < 0) {
 394                                 dev_err(&udev->dev,
 395                                         "cannot get DFU state: %d\n", ret);
 396                                 goto exit;
 397                         }
 398                         need_dfu_state = 0;
 399                 }
 400
 401                 switch (dfu_state) {
 402                 case STATE_DFU_DOWNLOAD_SYNC:
 403                         at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_SYNC");
 404                         ret = at76_dfu_get_status(udev, &dfu_stat_buf);
 405                         if (ret >= 0) {
 406                                 dfu_state = dfu_stat_buf.state;
 407                                 dfu_timeout = at76_get_timeout(&dfu_stat_buf);
 408                                 need_dfu_state = 0;
 409                         } else
 410                                 dev_err(&udev->dev,
 411                                         "at76_dfu_get_status returned %d\n",
 412                                         ret);
 413                         break;
 414
 415                 case STATE_DFU_DOWNLOAD_BUSY:
 416                         at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_BUSY");
 417                         need_dfu_state = 1;
 418
 419                         at76_dbg(DBG_DFU, "DFU: Resetting device");
 420                         schedule_timeout_interruptible(dfu_timeout);
 421                         break;
 422
 423                 case STATE_DFU_DOWNLOAD_IDLE:
 424                         at76_dbg(DBG_DFU, "DOWNLOAD...");
 425                         /* fall through */
 426                 case STATE_DFU_IDLE:
 427                         at76_dbg(DBG_DFU, "DFU IDLE");
 428
 429                         bsize = min_t(int, size, FW_BLOCK_SIZE);
 430                         memcpy(block, buf, bsize);
 431                         at76_dbg(DBG_DFU, "int fw, size left = %5d, "
 432                                  "bsize = %4d, blockno = %2d", size, bsize,
 433                                  blockno);
 434                         ret =
 435                             at76_load_int_fw_block(udev, blockno, block, bsize);
 436                         buf += bsize;
 437                         size -= bsize;
 438                         blockno++;
 439
 440                         if (ret != bsize)
 441                                 dev_err(&udev->dev,
 442                                         "at76_load_int_fw_block returned %d\n",
 443                                         ret);
 444                         need_dfu_state = 1;
 445                         break;
 446
 447                 case STATE_DFU_MANIFEST_SYNC:
 448                         at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_SYNC");
 449
 450                         ret = at76_dfu_get_status(udev, &dfu_stat_buf);
 451                         if (ret < 0)
 452                                 break;
 453
 454                         dfu_state = dfu_stat_buf.state;
 455                         dfu_timeout = at76_get_timeout(&dfu_stat_buf);
 456                         need_dfu_state = 0;
 457
 458                         /* override the timeout from the status response,
 459                            needed for AT76C505A */
 460                         if (manifest_sync_timeout > 0)
 461                                 dfu_timeout = manifest_sync_timeout;
 462
 463                         at76_dbg(DBG_DFU, "DFU: Waiting for manifest phase");
 464                         schedule_timeout_interruptible(dfu_timeout);
 465                         break;
 466
 467                 case STATE_DFU_MANIFEST:
 468                         at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST");
 469                         is_done = 1;
 470                         break;
 471
 472                 case STATE_DFU_MANIFEST_WAIT_RESET:
 473                         at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_WAIT_RESET");
 474                         is_done = 1;
 475                         break;
 476
 477                 case STATE_DFU_UPLOAD_IDLE:
 478                         at76_dbg(DBG_DFU, "STATE_DFU_UPLOAD_IDLE");
 479                         break;
 480
 481                 case STATE_DFU_ERROR:
 482                         at76_dbg(DBG_DFU, "STATE_DFU_ERROR");
 483                         ret = -EPIPE;
 484                         break;
 485
 486                 default:
 487                         at76_dbg(DBG_DFU, "DFU UNKNOWN STATE (%d)", dfu_state);
 488                         ret = -EINVAL;
 489                         break;
 490                 }
 491         } while (!is_done && (ret >= 0));
 492
 493 exit:
 494         kfree(block);
 495         if (ret >= 0)
 496                 ret = 0;
 497
 498         return ret;
 499 }
 500
 501 /* LED trigger */
 502 static int tx_activity;
 503 static void at76_ledtrig_tx_timerfunc(unsigned long data);
 504 static DEFINE_TIMER(ledtrig_tx_timer, at76_ledtrig_tx_timerfunc, 0, 0);
 505 DEFINE_LED_TRIGGER(ledtrig_tx);
 506
 507 static void at76_ledtrig_tx_timerfunc(unsigned long data)
 508 {
 509         static int tx_lastactivity;
 510
 511         if (tx_lastactivity != tx_activity) {
 512                 tx_lastactivity = tx_activity;
 513                 led_trigger_event(ledtrig_tx, LED_FULL);
 514                 mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
 515         } else
 516                 led_trigger_event(ledtrig_tx, LED_OFF);
 517 }
 518
 519 static void at76_ledtrig_tx_activity(void)
 520 {
 521         tx_activity++;
 522         if (!timer_pending(&ledtrig_tx_timer))
 523                 mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
 524 }
 525
 526 static int at76_remap(struct usb_device *udev)
 527 {
 528         int ret;
 529         ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0a,
 530                               USB_TYPE_VENDOR | USB_DIR_OUT |
 531                               USB_RECIP_INTERFACE, 0, 0, NULL, 0,
 532                               USB_CTRL_GET_TIMEOUT);
 533         if (ret < 0)
 534                 return ret;
 535         return 0;
 536 }
 537
 538 static int at76_get_op_mode(struct usb_device *udev)
 539 {
 540         int ret;
 541         u8 saved;
 542         u8 *op_mode;
 543
 544         op_mode = kmalloc(1, GFP_NOIO);
 545         if (!op_mode)
 546                 return -ENOMEM;
 547         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
 548                               USB_TYPE_VENDOR | USB_DIR_IN |
 549                               USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1,
 550                               USB_CTRL_GET_TIMEOUT);
 551         saved = *op_mode;
 552         kfree(op_mode);
 553
 554         if (ret < 0)
 555                 return ret;
 556         else if (ret < 1)
 557                 return -EIO;
 558         else
 559                 return saved;
 560 }
 561
 562 /* Load a block of the second ("external") part of the firmware */
 563 static inline int at76_load_ext_fw_block(struct usb_device *udev, int blockno,
 564                                          void *block, int size)
 565 {
 566         return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
 567                                USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
 568                                0x0802, blockno, block, size,
 569                                USB_CTRL_GET_TIMEOUT);
 570 }
 571
 572 static inline int at76_get_hw_cfg(struct usb_device *udev,
 573                                   union at76_hwcfg *buf, int buf_size)
 574 {
 575         return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
 576                                USB_TYPE_VENDOR | USB_DIR_IN |
 577                                USB_RECIP_INTERFACE, 0x0a02, 0,
 578                                buf, buf_size, USB_CTRL_GET_TIMEOUT);
 579 }
 580
 581 /* Intersil boards use a different "value" for GetHWConfig requests */
 582 static inline int at76_get_hw_cfg_intersil(struct usb_device *udev,
 583                                            union at76_hwcfg *buf, int buf_size)
 584 {
 585         return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
 586                                USB_TYPE_VENDOR | USB_DIR_IN |
 587                                USB_RECIP_INTERFACE, 0x0902, 0,
 588                                buf, buf_size, USB_CTRL_GET_TIMEOUT);
 589 }
 590
 591 /* Get the hardware configuration for the adapter and put it to the appropriate
 592  * fields of 'priv' (the GetHWConfig request and interpretation of the result
 593  * depends on the board type) */
 594 static int at76_get_hw_config(struct at76_priv *priv)
 595 {
 596         int ret;
 597         union at76_hwcfg *hwcfg = kmalloc(sizeof(*hwcfg), GFP_KERNEL);
 598
 599         if (!hwcfg)
 600                 return -ENOMEM;
 601
 602         if (at76_is_intersil(priv->board_type)) {
 603                 ret = at76_get_hw_cfg_intersil(priv->udev, hwcfg,
 604                                                sizeof(hwcfg->i));
 605                 if (ret < 0)
 606                         goto exit;
 607                 memcpy(priv->mac_addr, hwcfg->i.mac_addr, ETH_ALEN);
 608                 priv->regulatory_domain = hwcfg->i.regulatory_domain;
 609         } else if (at76_is_503rfmd(priv->board_type)) {
 610                 ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r3));
 611                 if (ret < 0)
 612                         goto exit;
 613                 memcpy(priv->mac_addr, hwcfg->r3.mac_addr, ETH_ALEN);
 614                 priv->regulatory_domain = hwcfg->r3.regulatory_domain;
 615         } else {
 616                 ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r5));
 617                 if (ret < 0)
 618                         goto exit;
 619                 memcpy(priv->mac_addr, hwcfg->r5.mac_addr, ETH_ALEN);
 620                 priv->regulatory_domain = hwcfg->r5.regulatory_domain;
 621         }
 622
 623 exit:
 624         kfree(hwcfg);
 625         if (ret < 0)
 626                 wiphy_err(priv->hw->wiphy, "cannot get HW Config (error %d)\n",
 627                           ret);
 628
 629         return ret;
 630 }
 631
 632 static struct reg_domain const *at76_get_reg_domain(u16 code)
 633 {
 634         int i;
 635         static struct reg_domain const fd_tab[] = {
 636                 { 0x10, "FCC (USA)", 0x7ff },   /* ch 1-11 */
 637                 { 0x20, "IC (Canada)", 0x7ff }, /* ch 1-11 */
 638                 { 0x30, "ETSI (most of Europe)", 0x1fff },      /* ch 1-13 */
 639                 { 0x31, "Spain", 0x600 },       /* ch 10-11 */
 640                 { 0x32, "France", 0x1e00 },     /* ch 10-13 */
 641                 { 0x40, "MKK (Japan)", 0x2000 },        /* ch 14 */
 642                 { 0x41, "MKK1 (Japan)", 0x3fff },       /* ch 1-14 */
 643                 { 0x50, "Israel", 0x3fc },      /* ch 3-9 */
 644                 { 0x00, "<unknown>", 0xffffffff }       /* ch 1-32 */
 645         };
 646
 647         /* Last entry is fallback for unknown domain code */
 648         for (i = 0; i < ARRAY_SIZE(fd_tab) - 1; i++)
 649                 if (code == fd_tab[i].code)
 650                         break;
 651
 652         return &fd_tab[i];
 653 }
 654
 655 static inline int at76_get_mib(struct usb_device *udev, u16 mib, void *buf,
 656                                int buf_size)
 657 {
 658         int ret;
 659
 660         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
 661                               USB_TYPE_VENDOR | USB_DIR_IN |
 662                               USB_RECIP_INTERFACE, mib << 8, 0, buf, buf_size,
 663                               USB_CTRL_GET_TIMEOUT);
 664         if (ret >= 0 && ret != buf_size)
 665                 return -EIO;
 666         return ret;
 667 }
 668
 669 /* Return positive number for status, negative for an error */
 670 static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd)
 671 {
 672         u8 *stat_buf;
 673         int ret;
 674
 675         stat_buf = kmalloc(40, GFP_NOIO);
 676         if (!stat_buf)
 677                 return -ENOMEM;
 678
 679         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22,
 680                         USB_TYPE_VENDOR | USB_DIR_IN |
 681                         USB_RECIP_INTERFACE, cmd, 0, stat_buf,
 682                         40, USB_CTRL_GET_TIMEOUT);
 683         if (ret >= 0)
 684                 ret = stat_buf[5];
 685         kfree(stat_buf);
 686
 687         return ret;
 688 }
 689
 690 #define MAKE_CMD_CASE(c) case (c): return #c
 691 static const char *at76_get_cmd_string(u8 cmd_status)
 692 {
 693         switch (cmd_status) {
 694                 MAKE_CMD_CASE(CMD_SET_MIB);
 695                 MAKE_CMD_CASE(CMD_GET_MIB);
 696                 MAKE_CMD_CASE(CMD_SCAN);
 697                 MAKE_CMD_CASE(CMD_JOIN);
 698                 MAKE_CMD_CASE(CMD_START_IBSS);
 699                 MAKE_CMD_CASE(CMD_RADIO_ON);
 700                 MAKE_CMD_CASE(CMD_RADIO_OFF);
 701                 MAKE_CMD_CASE(CMD_STARTUP);
 702         }
 703
 704         return "UNKNOWN";
 705 }
 706
 707 static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf,
 708                                  int buf_size)
 709 {
 710         int ret;
 711         struct at76_command *cmd_buf = kmalloc(sizeof(struct at76_command) +
 712                                                buf_size, GFP_KERNEL);
 713
 714         if (!cmd_buf)
 715                 return -ENOMEM;
 716
 717         cmd_buf->cmd = cmd;
 718         cmd_buf->reserved = 0;
 719         cmd_buf->size = cpu_to_le16(buf_size);
 720         memcpy(cmd_buf->data, buf, buf_size);
 721
 722         at76_dbg_dump(DBG_CMD, cmd_buf, sizeof(struct at76_command) + buf_size,
 723                       "issuing command %s (0x%02x)",
 724                       at76_get_cmd_string(cmd), cmd);
 725
 726         ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
 727                               USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
 728                               0, 0, cmd_buf,
 729                               sizeof(struct at76_command) + buf_size,
 730                               USB_CTRL_GET_TIMEOUT);
 731         kfree(cmd_buf);
 732         return ret;
 733 }
 734
 735 #define MAKE_CMD_STATUS_CASE(c) case (c): return #c
 736 static const char *at76_get_cmd_status_string(u8 cmd_status)
 737 {
 738         switch (cmd_status) {
 739                 MAKE_CMD_STATUS_CASE(CMD_STATUS_IDLE);
 740                 MAKE_CMD_STATUS_CASE(CMD_STATUS_COMPLETE);
 741                 MAKE_CMD_STATUS_CASE(CMD_STATUS_UNKNOWN);
 742                 MAKE_CMD_STATUS_CASE(CMD_STATUS_INVALID_PARAMETER);
 743                 MAKE_CMD_STATUS_CASE(CMD_STATUS_FUNCTION_NOT_SUPPORTED);
 744                 MAKE_CMD_STATUS_CASE(CMD_STATUS_TIME_OUT);
 745                 MAKE_CMD_STATUS_CASE(CMD_STATUS_IN_PROGRESS);
 746                 MAKE_CMD_STATUS_CASE(CMD_STATUS_HOST_FAILURE);
 747                 MAKE_CMD_STATUS_CASE(CMD_STATUS_SCAN_FAILED);
 748         }
 749
 750         return "UNKNOWN";
 751 }
 752
 753 /* Wait until the command is completed */
 754 static int at76_wait_completion(struct at76_priv *priv, int cmd)
 755 {
 756         int status = 0;
 757         unsigned long timeout = jiffies + CMD_COMPLETION_TIMEOUT;
 758
 759         do {
 760                 status = at76_get_cmd_status(priv->udev, cmd);
 761                 if (status < 0) {
 762                         wiphy_err(priv->hw->wiphy,
 763                                   "at76_get_cmd_status failed: %d\n",
 764                                   status);
 765                         break;
 766                 }
 767
 768                 at76_dbg(DBG_WAIT_COMPLETE,
 769                          "%s: Waiting on cmd %d, status = %d (%s)",
 770                          wiphy_name(priv->hw->wiphy), cmd, status,
 771                          at76_get_cmd_status_string(status));
 772
 773                 if (status != CMD_STATUS_IN_PROGRESS
 774                     && status != CMD_STATUS_IDLE)
 775                         break;
 776
 777                 schedule_timeout_interruptible(HZ / 10);        /* 100 ms */
 778                 if (time_after(jiffies, timeout)) {
 779                         wiphy_err(priv->hw->wiphy,
 780                                   "completion timeout for command %d\n", cmd);
 781                         status = -ETIMEDOUT;
 782                         break;
 783                 }
 784         } while (1);
 785
 786         return status;
 787 }
 788
 789 static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf)
 790 {
 791         int ret;
 792
 793         ret = at76_set_card_command(priv->udev, CMD_SET_MIB, buf,
 794                                     offsetof(struct set_mib_buffer,
 795                                              data) + buf->size);
 796         if (ret < 0)
 797                 return ret;
 798
 799         ret = at76_wait_completion(priv, CMD_SET_MIB);
 800         if (ret != CMD_STATUS_COMPLETE) {
 801                 wiphy_info(priv->hw->wiphy,
 802                            "set_mib: at76_wait_completion failed with %d\n",
 803                            ret);
 804                 ret = -EIO;
 805         }
 806
 807         return ret;
 808 }
 809
 810 /* Return < 0 on error, == 0 if no command sent, == 1 if cmd sent */
 811 static int at76_set_radio(struct at76_priv *priv, int enable)
 812 {
 813         int ret;
 814         int cmd;
 815
 816         if (priv->radio_on == enable)
 817                 return 0;
 818
 819         cmd = enable ? CMD_RADIO_ON : CMD_RADIO_OFF;
 820
 821         ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
 822         if (ret < 0)
 823                 wiphy_err(priv->hw->wiphy,
 824                           "at76_set_card_command(%d) failed: %d\n", cmd, ret);
 825         else
 826                 ret = 1;
 827
 828         priv->radio_on = enable;
 829         return ret;
 830 }
 831
 832 /* Set current power save mode (AT76_PM_OFF/AT76_PM_ON/AT76_PM_SMART) */
 833 static int at76_set_pm_mode(struct at76_priv *priv)
 834 {
 835         int ret = 0;
 836
 837         priv->mib_buf.type = MIB_MAC_MGMT;
 838         priv->mib_buf.size = 1;
 839         priv->mib_buf.index = offsetof(struct mib_mac_mgmt, power_mgmt_mode);
 840         priv->mib_buf.data.byte = priv->pm_mode;
 841
 842         ret = at76_set_mib(priv, &priv->mib_buf);
 843         if (ret < 0)
 844                 wiphy_err(priv->hw->wiphy, "set_mib (pm_mode) failed: %d\n",
 845                           ret);
 846
 847         return ret;
 848 }
 849
 850 static int at76_set_preamble(struct at76_priv *priv, u8 type)
 851 {
 852         int ret = 0;
 853
 854         priv->mib_buf.type = MIB_LOCAL;
 855         priv->mib_buf.size = 1;
 856         priv->mib_buf.index = offsetof(struct mib_local, preamble_type);
 857         priv->mib_buf.data.byte = type;
 858
 859         ret = at76_set_mib(priv, &priv->mib_buf);
 860         if (ret < 0)
 861                 wiphy_err(priv->hw->wiphy, "set_mib (preamble) failed: %d\n",
 862                           ret);
 863
 864         return ret;
 865 }
 866
 867 static int at76_set_frag(struct at76_priv *priv, u16 size)
 868 {
 869         int ret = 0;
 870
 871         priv->mib_buf.type = MIB_MAC;
 872         priv->mib_buf.size = 2;
 873         priv->mib_buf.index = offsetof(struct mib_mac, frag_threshold);
 874         priv->mib_buf.data.word = cpu_to_le16(size);
 875
 876         ret = at76_set_mib(priv, &priv->mib_buf);
 877         if (ret < 0)
 878                 wiphy_err(priv->hw->wiphy,
 879                           "set_mib (frag threshold) failed: %d\n", ret);
 880
 881         return ret;
 882 }
 883
 884 static int at76_set_rts(struct at76_priv *priv, u16 size)
 885 {
 886         int ret = 0;
 887
 888         priv->mib_buf.type = MIB_MAC;
 889         priv->mib_buf.size = 2;
 890         priv->mib_buf.index = offsetof(struct mib_mac, rts_threshold);
 891         priv->mib_buf.data.word = cpu_to_le16(size);
 892
 893         ret = at76_set_mib(priv, &priv->mib_buf);
 894         if (ret < 0)
 895                 wiphy_err(priv->hw->wiphy, "set_mib (rts) failed: %d\n", ret);
 896
 897         return ret;
 898 }
 899
 900 static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff)
 901 {
 902         int ret = 0;
 903
 904         priv->mib_buf.type = MIB_LOCAL;
 905         priv->mib_buf.size = 1;
 906         priv->mib_buf.index = offsetof(struct mib_local, txautorate_fallback);
 907         priv->mib_buf.data.byte = onoff;
 908
 909         ret = at76_set_mib(priv, &priv->mib_buf);
 910         if (ret < 0)
 911                 wiphy_err(priv->hw->wiphy,
 912                           "set_mib (autorate fallback) failed: %d\n", ret);
 913
 914         return ret;
 915 }
 916
 917 static void at76_dump_mib_mac_addr(struct at76_priv *priv)
 918 {
 919         int i;
 920         int ret;
 921         struct mib_mac_addr *m = kmalloc(sizeof(struct mib_mac_addr),
 922                                          GFP_KERNEL);
 923
 924         if (!m)
 925                 return;
 926
 927         ret = at76_get_mib(priv->udev, MIB_MAC_ADDR, m,
 928                            sizeof(struct mib_mac_addr));
 929         if (ret < 0) {
 930                 wiphy_err(priv->hw->wiphy,
 931                           "at76_get_mib (MAC_ADDR) failed: %d\n", ret);
 932                 goto exit;
 933         }
 934
 935         at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %pM res 0x%x 0x%x",
 936                  wiphy_name(priv->hw->wiphy),
 937                  m->mac_addr, m->res[0], m->res[1]);
 938         for (i = 0; i < ARRAY_SIZE(m->group_addr); i++)
 939                 at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %pM, "
 940                          "status %d", wiphy_name(priv->hw->wiphy), i,
 941                          m->group_addr[i], m->group_addr_status[i]);
 942 exit:
 943         kfree(m);
 944 }
 945
 946 static void at76_dump_mib_mac_wep(struct at76_priv *priv)
 947 {
 948         int i;
 949         int ret;
 950         int key_len;
 951         struct mib_mac_wep *m = kmalloc(sizeof(struct mib_mac_wep), GFP_KERNEL);
 952
 953         if (!m)
 954                 return;
 955
 956         ret = at76_get_mib(priv->udev, MIB_MAC_WEP, m,
 957                            sizeof(struct mib_mac_wep));
 958         if (ret < 0) {
 959                 wiphy_err(priv->hw->wiphy,
 960                           "at76_get_mib (MAC_WEP) failed: %d\n", ret);
 961                 goto exit;
 962         }
 963
 964         at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u "
 965                  "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u "
 966                  "encr_level %u key %d", wiphy_name(priv->hw->wiphy),
 967                  m->privacy_invoked, m->wep_default_key_id,
 968                  m->wep_key_mapping_len, m->exclude_unencrypted,
 969                  le32_to_cpu(m->wep_icv_error_count),
 970                  le32_to_cpu(m->wep_excluded_count), m->encryption_level,
 971                  m->wep_default_key_id);
 972
 973         key_len = (m->encryption_level == 1) ?
 974             WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;
 975
 976         for (i = 0; i < WEP_KEYS; i++)
 977                 at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %*phD",
 978                          wiphy_name(priv->hw->wiphy), i,
 979                          key_len, m->wep_default_keyvalue[i]);
 980 exit:
 981         kfree(m);
 982 }
 983
 984 static void at76_dump_mib_mac_mgmt(struct at76_priv *priv)
 985 {
 986         int ret;
 987         struct mib_mac_mgmt *m = kmalloc(sizeof(struct mib_mac_mgmt),
 988                                          GFP_KERNEL);
 989
 990         if (!m)
 991                 return;
 992
 993         ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, m,
 994                            sizeof(struct mib_mac_mgmt));
 995         if (ret < 0) {
 996                 wiphy_err(priv->hw->wiphy,
 997                           "at76_get_mib (MAC_MGMT) failed: %d\n", ret);
 998                 goto exit;
 999         }
1000
1001         at76_dbg(DBG_MIB, "%s: MIB MAC_MGMT: beacon_period %d CFP_max_duration "
1002                  "%d medium_occupancy_limit %d station_id 0x%x ATIM_window %d "
1003                  "CFP_mode %d privacy_opt_impl %d DTIM_period %d CFP_period %d "
1004                  "current_bssid %pM current_essid %*phD current_bss_type %d "
1005                  "pm_mode %d ibss_change %d res %d "
1006                  "multi_domain_capability_implemented %d "
1007                  "international_roaming %d country_string %.3s",
1008                  wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period),
1009                  le16_to_cpu(m->CFP_max_duration),
1010                  le16_to_cpu(m->medium_occupancy_limit),
1011                  le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window),
1012                  m->CFP_mode, m->privacy_option_implemented, m->DTIM_period,
1013                  m->CFP_period, m->current_bssid,
1014                  IW_ESSID_MAX_SIZE, m->current_essid,
1015                  m->current_bss_type, m->power_mgmt_mode, m->ibss_change,
1016                  m->res, m->multi_domain_capability_implemented,
1017                  m->multi_domain_capability_enabled, m->country_string);
1018 exit:
1019         kfree(m);
1020 }
1021
1022 static void at76_dump_mib_mac(struct at76_priv *priv)
1023 {
1024         int ret;
1025         struct mib_mac *m = kmalloc(sizeof(struct mib_mac), GFP_KERNEL);
1026
1027         if (!m)
1028                 return;
1029
1030         ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac));
1031         if (ret < 0) {
1032                 wiphy_err(priv->hw->wiphy,
1033                           "at76_get_mib (MAC) failed: %d\n", ret);
1034                 goto exit;
1035         }
1036
1037         at76_dbg(DBG_MIB, "%s: MIB MAC: max_tx_msdu_lifetime %d "
1038                  "max_rx_lifetime %d frag_threshold %d rts_threshold %d "
1039                  "cwmin %d cwmax %d short_retry_time %d long_retry_time %d "
1040                  "scan_type %d scan_channel %d probe_delay %u "
1041                  "min_channel_time %d max_channel_time %d listen_int %d "
1042                  "desired_ssid %*phD desired_bssid %pM desired_bsstype %d",
1043                  wiphy_name(priv->hw->wiphy),
1044                  le32_to_cpu(m->max_tx_msdu_lifetime),
1045                  le32_to_cpu(m->max_rx_lifetime),
1046                  le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold),
1047                  le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax),
1048                  m->short_retry_time, m->long_retry_time, m->scan_type,
1049                  m->scan_channel, le16_to_cpu(m->probe_delay),
1050                  le16_to_cpu(m->min_channel_time),
1051                  le16_to_cpu(m->max_channel_time),
1052                  le16_to_cpu(m->listen_interval),
1053                  IW_ESSID_MAX_SIZE, m->desired_ssid,
1054                  m->desired_bssid, m->desired_bsstype);
1055 exit:
1056         kfree(m);
1057 }
1058
1059 static void at76_dump_mib_phy(struct at76_priv *priv)
1060 {
1061         int ret;
1062         struct mib_phy *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
1063
1064         if (!m)
1065                 return;
1066
1067         ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy));
1068         if (ret < 0) {
1069                 wiphy_err(priv->hw->wiphy,
1070                           "at76_get_mib (PHY) failed: %d\n", ret);
1071                 goto exit;
1072         }
1073
1074         at76_dbg(DBG_MIB, "%s: MIB PHY: ed_threshold %d slot_time %d "
1075                  "sifs_time %d preamble_length %d plcp_header_length %d "
1076                  "mpdu_max_length %d cca_mode_supported %d operation_rate_set "
1077                  "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d "
1078                  "phy_type %d current_reg_domain %d",
1079                  wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold),
1080                  le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time),
1081                  le16_to_cpu(m->preamble_length),
1082                  le16_to_cpu(m->plcp_header_length),
1083                  le16_to_cpu(m->mpdu_max_length),
1084                  le16_to_cpu(m->cca_mode_supported), m->operation_rate_set[0],
1085                  m->operation_rate_set[1], m->operation_rate_set[2],
1086                  m->operation_rate_set[3], m->channel_id, m->current_cca_mode,
1087                  m->phy_type, m->current_reg_domain);
1088 exit:
1089         kfree(m);
1090 }
1091
1092 static void at76_dump_mib_local(struct at76_priv *priv)
1093 {
1094         int ret;
1095         struct mib_local *m = kmalloc(sizeof(*m), GFP_KERNEL);
1096
1097         if (!m)
1098                 return;
1099
1100         ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(*m));
1101         if (ret < 0) {
1102                 wiphy_err(priv->hw->wiphy,
1103                           "at76_get_mib (LOCAL) failed: %d\n", ret);
1104                 goto exit;
1105         }
1106
1107         at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d "
1108                  "txautorate_fallback %d ssid_size %d promiscuous_mode %d "
1109                  "preamble_type %d", wiphy_name(priv->hw->wiphy),
1110                  m->beacon_enable,
1111                  m->txautorate_fallback, m->ssid_size, m->promiscuous_mode,
1112                  m->preamble_type);
1113 exit:
1114         kfree(m);
1115 }
1116
1117 static void at76_dump_mib_mdomain(struct at76_priv *priv)
1118 {
1119         int ret;
1120         struct mib_mdomain *m = kmalloc(sizeof(struct mib_mdomain), GFP_KERNEL);
1121
1122         if (!m)
1123                 return;
1124
1125         ret = at76_get_mib(priv->udev, MIB_MDOMAIN, m,
1126                            sizeof(struct mib_mdomain));
1127         if (ret < 0) {
1128                 wiphy_err(priv->hw->wiphy,
1129                           "at76_get_mib (MDOMAIN) failed: %d\n", ret);
1130                 goto exit;
1131         }
1132
1133         at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %*phD",
1134                  wiphy_name(priv->hw->wiphy),
1135                  (int)sizeof(m->channel_list), m->channel_list);
1136
1137         at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %*phD",
1138                  wiphy_name(priv->hw->wiphy),
1139                  (int)sizeof(m->tx_powerlevel), m->tx_powerlevel);
1140 exit:
1141         kfree(m);
1142 }
1143
1144 /* Enable monitor mode */
1145 static int at76_start_monitor(struct at76_priv *priv)
1146 {
1147         struct at76_req_scan scan;
1148         int ret;
1149
1150         memset(&scan, 0, sizeof(struct at76_req_scan));
1151         memset(scan.bssid, 0xff, ETH_ALEN);
1152
1153         scan.channel = priv->channel;
1154         scan.scan_type = SCAN_TYPE_PASSIVE;
1155         scan.international_scan = 0;
1156         scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
1157         scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
1158         scan.probe_delay = cpu_to_le16(0);
1159
1160         ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
1161         if (ret >= 0)
1162                 ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
1163
1164         return ret;
1165 }
1166
1167 /* Calculate padding from txbuf->wlength (which excludes the USB TX header),
1168    likely to compensate a flaw in the AT76C503A USB part ... */
1169 static inline int at76_calc_padding(int wlen)
1170 {
1171         /* add the USB TX header */
1172         wlen += AT76_TX_HDRLEN;
1173
1174         wlen = wlen % 64;
1175
1176         if (wlen < 50)
1177                 return 50 - wlen;
1178
1179         if (wlen >= 61)
1180                 return 64 + 50 - wlen;
1181
1182         return 0;
1183 }
1184
1185 static void at76_rx_callback(struct urb *urb)
1186 {
1187         struct at76_priv *priv = urb->context;
1188
1189         priv->rx_tasklet.data = (unsigned long)urb;
1190         tasklet_schedule(&priv->rx_tasklet);
1191 }
1192
1193 static int at76_submit_rx_urb(struct at76_priv *priv)
1194 {
1195         int ret;
1196         int size;
1197         struct sk_buff *skb = priv->rx_skb;
1198
1199         if (!priv->rx_urb) {
1200                 wiphy_err(priv->hw->wiphy, "%s: priv->rx_urb is NULL\n",
1201                           __func__);
1202                 return -EFAULT;
1203         }
1204
1205         if (!skb) {
1206                 skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
1207                 if (!skb) {
1208                         wiphy_err(priv->hw->wiphy,
1209                                   "cannot allocate rx skbuff\n");
1210                         ret = -ENOMEM;
1211                         goto exit;
1212                 }
1213                 priv->rx_skb = skb;
1214         } else {
1215                 skb_push(skb, skb_headroom(skb));
1216                 skb_trim(skb, 0);
1217         }
1218
1219         size = skb_tailroom(skb);
1220         usb_fill_bulk_urb(priv->rx_urb, priv->udev, priv->rx_pipe,
1221                           skb_put(skb, size), size, at76_rx_callback, priv);
1222         ret = usb_submit_urb(priv->rx_urb, GFP_ATOMIC);
1223         if (ret < 0) {
1224                 if (ret == -ENODEV)
1225                         at76_dbg(DBG_DEVSTART,
1226                                  "usb_submit_urb returned -ENODEV");
1227                 else
1228                         wiphy_err(priv->hw->wiphy,
1229                                   "rx, usb_submit_urb failed: %d\n", ret);
1230         }
1231
1232 exit:
1233         if (ret < 0 && ret != -ENODEV)
1234                 wiphy_err(priv->hw->wiphy,
1235                           "cannot submit rx urb - please unload the driver and/or power cycle the device\n");
1236
1237         return ret;
1238 }
1239
1240 /* Download external firmware */
1241 static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
1242 {
1243         int ret;
1244         int op_mode;
1245         int blockno = 0;
1246         int bsize;
1247         u8 *block;
1248         u8 *buf = fwe->extfw;
1249         int size = fwe->extfw_size;
1250
1251         if (!buf || !size)
1252                 return -ENOENT;
1253
1254         op_mode = at76_get_op_mode(udev);
1255         at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
1256
1257         if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
1258                 dev_err(&udev->dev, "unexpected opmode %d\n", op_mode);
1259                 return -EINVAL;
1260         }
1261
1262         block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
1263         if (!block)
1264                 return -ENOMEM;
1265
1266         at76_dbg(DBG_DEVSTART, "downloading external firmware");
1267
1268         /* for fw >= 0.100, the device needs an extra empty block */
1269         do {
1270                 bsize = min_t(int, size, FW_BLOCK_SIZE);
1271                 memcpy(block, buf, bsize);
1272                 at76_dbg(DBG_DEVSTART,
1273                          "ext fw, size left = %5d, bsize = %4d, blockno = %2d",
1274                          size, bsize, blockno);
1275                 ret = at76_load_ext_fw_block(udev, blockno, block, bsize);
1276                 if (ret != bsize) {
1277                         dev_err(&udev->dev,
1278                                 "loading %dth firmware block failed: %d\n",
1279                                 blockno, ret);
1280                         goto exit;
1281                 }
1282                 buf += bsize;
1283                 size -= bsize;
1284                 blockno++;
1285         } while (bsize > 0);
1286
1287         if (at76_is_505a(fwe->board_type)) {
1288                 at76_dbg(DBG_DEVSTART, "200 ms delay for 505a");
1289                 schedule_timeout_interruptible(HZ / 5 + 1);
1290         }
1291
1292 exit:
1293         kfree(block);
1294         if (ret < 0)
1295                 dev_err(&udev->dev,
1296                         "downloading external firmware failed: %d\n", ret);
1297         return ret;
1298 }
1299
1300 /* Download internal firmware */
1301 static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
1302 {
1303         int ret;
1304         int need_remap = !at76_is_505a(fwe->board_type);
1305
1306         ret = at76_usbdfu_download(udev, fwe->intfw, fwe->intfw_size,
1307                                    need_remap ? 0 : 2 * HZ);
1308
1309         if (ret < 0) {
1310                 dev_err(&udev->dev,
1311                         "downloading internal fw failed with %d\n", ret);
1312                 goto exit;
1313         }
1314
1315         at76_dbg(DBG_DEVSTART, "sending REMAP");
1316
1317         /* no REMAP for 505A (see SF driver) */
1318         if (need_remap) {
1319                 ret = at76_remap(udev);
1320                 if (ret < 0) {
1321                         dev_err(&udev->dev,
1322                                 "sending REMAP failed with %d\n", ret);
1323                         goto exit;
1324                 }
1325         }
1326
1327         at76_dbg(DBG_DEVSTART, "sleeping for 2 seconds");
1328         schedule_timeout_interruptible(2 * HZ + 1);
1329         usb_reset_device(udev);
1330
1331 exit:
1332         return ret;
1333 }
1334
1335 static int at76_startup_device(struct at76_priv *priv)
1336 {
1337         struct at76_card_config *ccfg = &priv->card_config;
1338         int ret;
1339
1340         at76_dbg(DBG_PARAMS,
1341                  "%s param: ssid %.*s (%*phD) mode %s ch %d wep %s key %d "
1342                  "keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size,
1343                  priv->essid, IW_ESSID_MAX_SIZE, priv->essid,
1344                  priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra",
1345                  priv->channel, priv->wep_enabled ? "enabled" : "disabled",
1346                  priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]);
1347         at76_dbg(DBG_PARAMS,
1348                  "%s param: preamble %s rts %d retry %d frag %d "
1349                  "txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy),
1350                  preambles[priv->preamble_type], priv->rts_threshold,
1351                  priv->short_retry_limit, priv->frag_threshold,
1352                  priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate ==
1353                  TX_RATE_2MBIT ? "2MBit" : priv->txrate ==
1354                  TX_RATE_5_5MBIT ? "5.5MBit" : priv->txrate ==
1355                  TX_RATE_11MBIT ? "11MBit" : priv->txrate ==
1356                  TX_RATE_AUTO ? "auto" : "<invalid>", priv->auth_mode);
1357         at76_dbg(DBG_PARAMS,
1358                  "%s param: pm_mode %d pm_period %d auth_mode %s "
1359                  "scan_times %d %d scan_mode %s",
1360                  wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period,
1361                  priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret",
1362                  priv->scan_min_time, priv->scan_max_time,
1363                  priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive");
1364
1365         memset(ccfg, 0, sizeof(struct at76_card_config));
1366         ccfg->promiscuous_mode = 0;
1367         ccfg->short_retry_limit = priv->short_retry_limit;
1368
1369         if (priv->wep_enabled) {
1370                 if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN)
1371                         ccfg->encryption_type = 2;
1372                 else
1373                         ccfg->encryption_type = 1;
1374
1375                 /* jal: always exclude unencrypted if WEP is active */
1376                 ccfg->exclude_unencrypted = 1;
1377         } else {
1378                 ccfg->exclude_unencrypted = 0;
1379                 ccfg->encryption_type = 0;
1380         }
1381
1382         ccfg->rts_threshold = cpu_to_le16(priv->rts_threshold);
1383         ccfg->fragmentation_threshold = cpu_to_le16(priv->frag_threshold);
1384
1385         memcpy(ccfg->basic_rate_set, hw_rates, 4);
1386         /* jal: really needed, we do a set_mib for autorate later ??? */
1387         ccfg->auto_rate_fallback = (priv->txrate == TX_RATE_AUTO ? 1 : 0);
1388         ccfg->channel = priv->channel;
1389         ccfg->privacy_invoked = priv->wep_enabled;
1390         memcpy(ccfg->current_ssid, priv->essid, IW_ESSID_MAX_SIZE);
1391         ccfg->ssid_len = priv->essid_size;
1392
1393         ccfg->wep_default_key_id = priv->wep_key_id;
1394         memcpy(ccfg->wep_default_key_value, priv->wep_keys,
1395                sizeof(priv->wep_keys));
1396
1397         ccfg->short_preamble = priv->preamble_type;
1398         ccfg->beacon_period = cpu_to_le16(priv->beacon_period);
1399
1400         ret = at76_set_card_command(priv->udev, CMD_STARTUP, &priv->card_config,
1401                                     sizeof(struct at76_card_config));
1402         if (ret < 0) {
1403                 wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
1404                           ret);
1405                 return ret;
1406         }
1407
1408         at76_wait_completion(priv, CMD_STARTUP);
1409
1410         /* remove BSSID from previous run */
1411         memset(priv->bssid, 0, ETH_ALEN);
1412
1413         if (at76_set_radio(priv, 1) == 1)
1414                 at76_wait_completion(priv, CMD_RADIO_ON);
1415
1416         ret = at76_set_preamble(priv, priv->preamble_type);
1417         if (ret < 0)
1418                 return ret;
1419
1420         ret = at76_set_frag(priv, priv->frag_threshold);
1421         if (ret < 0)
1422                 return ret;
1423
1424         ret = at76_set_rts(priv, priv->rts_threshold);
1425         if (ret < 0)
1426                 return ret;
1427
1428         ret = at76_set_autorate_fallback(priv,
1429                                          priv->txrate == TX_RATE_AUTO ? 1 : 0);
1430         if (ret < 0)
1431                 return ret;
1432
1433         ret = at76_set_pm_mode(priv);
1434         if (ret < 0)
1435                 return ret;
1436
1437         if (at76_debug & DBG_MIB) {
1438                 at76_dump_mib_mac(priv);
1439                 at76_dump_mib_mac_addr(priv);
1440                 at76_dump_mib_mac_mgmt(priv);
1441                 at76_dump_mib_mac_wep(priv);
1442                 at76_dump_mib_mdomain(priv);
1443                 at76_dump_mib_phy(priv);
1444                 at76_dump_mib_local(priv);
1445         }
1446
1447         return 0;
1448 }
1449
1450 /* Enable or disable promiscuous mode */
1451 static void at76_work_set_promisc(struct work_struct *work)
1452 {
1453         struct at76_priv *priv = container_of(work, struct at76_priv,
1454                                               work_set_promisc);
1455         int ret = 0;
1456
1457         if (priv->device_unplugged)
1458                 return;
1459
1460         mutex_lock(&priv->mtx);
1461
1462         priv->mib_buf.type = MIB_LOCAL;
1463         priv->mib_buf.size = 1;
1464         priv->mib_buf.index = offsetof(struct mib_local, promiscuous_mode);
1465         priv->mib_buf.data.byte = priv->promisc ? 1 : 0;
1466
1467         ret = at76_set_mib(priv, &priv->mib_buf);
1468         if (ret < 0)
1469                 wiphy_err(priv->hw->wiphy,
1470                           "set_mib (promiscuous_mode) failed: %d\n", ret);
1471
1472         mutex_unlock(&priv->mtx);
1473 }
1474
1475 /* Submit Rx urb back to the device */
1476 static void at76_work_submit_rx(struct work_struct *work)
1477 {
1478         struct at76_priv *priv = container_of(work, struct at76_priv,
1479                                               work_submit_rx);
1480
1481         mutex_lock(&priv->mtx);
1482         at76_submit_rx_urb(priv);
1483         mutex_unlock(&priv->mtx);
1484 }
1485
1486 static void at76_rx_tasklet(unsigned long param)
1487 {
1488         struct urb *urb = (struct urb *)param;
1489         struct at76_priv *priv = urb->context;
1490         struct at76_rx_buffer *buf;
1491         struct ieee80211_rx_status rx_status = { 0 };
1492
1493         if (priv->device_unplugged) {
1494                 at76_dbg(DBG_DEVSTART, "device unplugged");
1495                 at76_dbg(DBG_DEVSTART, "urb status %d", urb->status);
1496                 return;
1497         }
1498
1499         if (!priv->rx_skb || !priv->rx_skb->data)
1500                 return;
1501
1502         buf = (struct at76_rx_buffer *)priv->rx_skb->data;
1503
1504         if (urb->status != 0) {
1505                 if (urb->status != -ENOENT && urb->status != -ECONNRESET)
1506                         at76_dbg(DBG_URB,
1507                                  "%s %s: - nonzero Rx bulk status received: %d",
1508                                  __func__, wiphy_name(priv->hw->wiphy),
1509                                  urb->status);
1510                 return;
1511         }
1512
1513         at76_dbg(DBG_RX_ATMEL_HDR,
1514                  "%s: rx frame: rate %d rssi %d noise %d link %d",
1515                  wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi,
1516                  buf->noise_level, buf->link_quality);
1517
1518         skb_pull(priv->rx_skb, AT76_RX_HDRLEN);
1519         skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength));
1520         at76_dbg_dump(DBG_RX_DATA, priv->rx_skb->data,
1521                       priv->rx_skb->len, "RX: len=%d", priv->rx_skb->len);
1522
1523         rx_status.signal = buf->rssi;
1524         rx_status.flag |= RX_FLAG_DECRYPTED;
1525         rx_status.flag |= RX_FLAG_IV_STRIPPED;
1526
1527         at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d",
1528                  priv->rx_skb->len, priv->rx_skb->data_len);
1529         memcpy(IEEE80211_SKB_RXCB(priv->rx_skb), &rx_status, sizeof(rx_status));
1530         ieee80211_rx_irqsafe(priv->hw, priv->rx_skb);
1531
1532         /* Use a new skb for the next receive */
1533         priv->rx_skb = NULL;
1534
1535         at76_submit_rx_urb(priv);
1536 }
1537
1538 /* Load firmware into kernel memory and parse it */
1539 static struct fwentry *at76_load_firmware(struct usb_device *udev,
1540                                           enum board_type board_type)
1541 {
1542         int ret;
1543         char *str;
1544         struct at76_fw_header *fwh;
1545         struct fwentry *fwe = &firmwares[board_type];
1546
1547         mutex_lock(&fw_mutex);
1548
1549         if (fwe->loaded) {
1550                 at76_dbg(DBG_FW, "re-using previously loaded fw");
1551                 goto exit;
1552         }
1553
1554         at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname);
1555         ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev);
1556         if (ret < 0) {
1557                 dev_err(&udev->dev, "firmware %s not found!\n",
1558                         fwe->fwname);
1559                 dev_err(&udev->dev,
1560                         "you may need to download the firmware from http://developer.berlios.de/projects/at76c503a/\n");
1561                 goto exit;
1562         }
1563
1564         at76_dbg(DBG_FW, "got it.");
1565         fwh = (struct at76_fw_header *)(fwe->fw->data);
1566
1567         if (fwe->fw->size <= sizeof(*fwh)) {
1568                 dev_err(&udev->dev,
1569                         "firmware is too short (0x%zx)\n", fwe->fw->size);
1570                 goto exit;
1571         }
1572
1573         /* CRC currently not checked */
1574         fwe->board_type = le32_to_cpu(fwh->board_type);
1575         if (fwe->board_type != board_type) {
1576                 dev_err(&udev->dev,
1577                         "board type mismatch, requested %u, got %u\n",
1578                         board_type, fwe->board_type);
1579                 goto exit;
1580         }
1581
1582         fwe->fw_version.major = fwh->major;
1583         fwe->fw_version.minor = fwh->minor;
1584         fwe->fw_version.patch = fwh->patch;
1585         fwe->fw_version.build = fwh->build;
1586
1587         str = (char *)fwh + le32_to_cpu(fwh->str_offset);
1588         fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset);
1589         fwe->intfw_size = le32_to_cpu(fwh->int_fw_len);
1590         fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset);
1591         fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len);
1592
1593         fwe->loaded = 1;
1594
1595         dev_printk(KERN_DEBUG, &udev->dev,
1596                    "using firmware %s (version %d.%d.%d-%d)\n",
1597                    fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build);
1598
1599         at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type,
1600                  le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len),
1601                  le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len));
1602         at76_dbg(DBG_DEVSTART, "firmware id %s", str);
1603
1604 exit:
1605         mutex_unlock(&fw_mutex);
1606
1607         if (fwe->loaded)
1608                 return fwe;
1609         else
1610                 return NULL;
1611 }
1612
1613 static int at76_join(struct at76_priv *priv)
1614 {
1615         struct at76_req_join join;
1616         int ret;
1617
1618         memset(&join, 0, sizeof(struct at76_req_join));
1619         memcpy(join.essid, priv->essid, priv->essid_size);
1620         join.essid_size = priv->essid_size;
1621         memcpy(join.bssid, priv->bssid, ETH_ALEN);
1622         join.bss_type = INFRASTRUCTURE_MODE;
1623         join.channel = priv->channel;
1624         join.timeout = cpu_to_le16(2000);
1625
1626         at76_dbg(DBG_MAC80211, "%s: sending CMD_JOIN", __func__);
1627         ret = at76_set_card_command(priv->udev, CMD_JOIN, &join,
1628                                     sizeof(struct at76_req_join));
1629
1630         if (ret < 0) {
1631                 wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
1632                           ret);
1633                 return 0;
1634         }
1635
1636         ret = at76_wait_completion(priv, CMD_JOIN);
1637         at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret);
1638         if (ret != CMD_STATUS_COMPLETE) {
1639                 wiphy_err(priv->hw->wiphy, "at76_wait_completion failed: %d\n",
1640                           ret);
1641                 return 0;
1642         }
1643
1644         at76_set_pm_mode(priv);
1645
1646         return 0;
1647 }
1648
1649 static void at76_work_join_bssid(struct work_struct *work)
1650 {
1651         struct at76_priv *priv = container_of(work, struct at76_priv,
1652                                               work_join_bssid);
1653
1654         if (priv->device_unplugged)
1655                 return;
1656
1657         mutex_lock(&priv->mtx);
1658
1659         if (is_valid_ether_addr(priv->bssid))
1660                 at76_join(priv);
1661
1662         mutex_unlock(&priv->mtx);
1663 }
1664
1665 static void at76_mac80211_tx_callback(struct urb *urb)
1666 {
1667         struct at76_priv *priv = urb->context;
1668         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb);
1669
1670         at76_dbg(DBG_MAC80211, "%s()", __func__);
1671
1672         switch (urb->status) {
1673         case 0:
1674                 /* success */
1675                 info->flags |= IEEE80211_TX_STAT_ACK;
1676                 break;
1677         case -ENOENT:
1678         case -ECONNRESET:
1679                 /* fail, urb has been unlinked */
1680                 /* FIXME: add error message */
1681                 break;
1682         default:
1683                 at76_dbg(DBG_URB, "%s - nonzero tx status received: %d",
1684                          __func__, urb->status);
1685                 break;
1686         }
1687
1688         memset(&info->status, 0, sizeof(info->status));
1689
1690         ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb);
1691
1692         priv->tx_skb = NULL;
1693
1694         ieee80211_wake_queues(priv->hw);
1695 }
1696
1697 static void at76_mac80211_tx(struct ieee80211_hw *hw,
1698                              struct ieee80211_tx_control *control,
1699                              struct sk_buff *skb)
1700 {
1701         struct at76_priv *priv = hw->priv;
1702         struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer;
1703         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1704         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
1705         int padding, submit_len, ret;
1706
1707         at76_dbg(DBG_MAC80211, "%s()", __func__);
1708
1709         if (priv->tx_urb->status == -EINPROGRESS) {
1710                 wiphy_err(priv->hw->wiphy,
1711                           "%s called while tx urb is pending\n", __func__);
1712                 dev_kfree_skb_any(skb);
1713                 return;
1714         }
1715
1716         /* The following code lines are important when the device is going to
1717          * authenticate with a new bssid. The driver must send CMD_JOIN before
1718          * an authentication frame is transmitted. For this to succeed, the
1719          * correct bssid of the AP must be known. As mac80211 does not inform
1720          * drivers about the bssid prior to the authentication process the
1721          * following workaround is necessary. If the TX frame is an
1722          * authentication frame extract the bssid and send the CMD_JOIN. */
1723         if (mgmt->frame_control & cpu_to_le16(IEEE80211_STYPE_AUTH)) {
1724                 if (!ether_addr_equal(priv->bssid, mgmt->bssid)) {
1725                         memcpy(priv->bssid, mgmt->bssid, ETH_ALEN);
1726                         ieee80211_queue_work(hw, &priv->work_join_bssid);
1727                         dev_kfree_skb_any(skb);
1728                         return;
1729                 }
1730         }
1731
1732         ieee80211_stop_queues(hw);
1733
1734         at76_ledtrig_tx_activity();     /* tell ledtrigger we send a packet */
1735
1736         WARN_ON(priv->tx_skb != NULL);
1737
1738         priv->tx_skb = skb;
1739         padding = at76_calc_padding(skb->len);
1740         submit_len = AT76_TX_HDRLEN + skb->len + padding;
1741
1742         /* setup 'Atmel' header */
1743         memset(tx_buffer, 0, sizeof(*tx_buffer));
1744         tx_buffer->padding = padding;
1745         tx_buffer->wlength = cpu_to_le16(skb->len);
1746         tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value;
1747         memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved));
1748         memcpy(tx_buffer->packet, skb->data, skb->len);
1749
1750         at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr",
1751                  wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength),
1752                  tx_buffer->padding, tx_buffer->tx_rate);
1753
1754         /* send stuff */
1755         at76_dbg_dump(DBG_TX_DATA_CONTENT, tx_buffer, submit_len,
1756                       "%s(): tx_buffer %d bytes:", __func__, submit_len);
1757         usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer,
1758                           submit_len, at76_mac80211_tx_callback, priv);
1759         ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
1760         if (ret) {
1761                 wiphy_err(priv->hw->wiphy, "error in tx submit urb: %d\n", ret);
1762                 if (ret == -EINVAL)
1763                         wiphy_err(priv->hw->wiphy,
1764                                   "-EINVAL: tx urb %p hcpriv %p complete %p\n",
1765                                   priv->tx_urb,
1766                                   priv->tx_urb->hcpriv, priv->tx_urb->complete);
1767         }
1768 }
1769
1770 static int at76_mac80211_start(struct ieee80211_hw *hw)
1771 {
1772         struct at76_priv *priv = hw->priv;
1773         int ret;
1774
1775         at76_dbg(DBG_MAC80211, "%s()", __func__);
1776
1777         mutex_lock(&priv->mtx);
1778
1779         ret = at76_submit_rx_urb(priv);
1780         if (ret < 0) {
1781                 wiphy_err(priv->hw->wiphy, "open: submit_rx_urb failed: %d\n",
1782                           ret);
1783                 goto error;
1784         }
1785
1786         at76_startup_device(priv);
1787
1788         at76_start_monitor(priv);
1789
1790 error:
1791         mutex_unlock(&priv->mtx);
1792
1793         return 0;
1794 }
1795
1796 static void at76_mac80211_stop(struct ieee80211_hw *hw)
1797 {
1798         struct at76_priv *priv = hw->priv;
1799
1800         at76_dbg(DBG_MAC80211, "%s()", __func__);
1801
1802         cancel_delayed_work(&priv->dwork_hw_scan);
1803         cancel_work_sync(&priv->work_join_bssid);
1804         cancel_work_sync(&priv->work_set_promisc);
1805
1806         mutex_lock(&priv->mtx);
1807
1808         if (!priv->device_unplugged) {
1809                 /* We are called by "ifconfig ethX down", not because the
1810                  * device is not available anymore. */
1811                 at76_set_radio(priv, 0);
1812
1813                 /* We unlink rx_urb because at76_open() re-submits it.
1814                  * If unplugged, at76_delete_device() takes care of it. */
1815                 usb_kill_urb(priv->rx_urb);
1816         }
1817
1818         mutex_unlock(&priv->mtx);
1819 }
1820
1821 static int at76_add_interface(struct ieee80211_hw *hw,
1822                               struct ieee80211_vif *vif)
1823 {
1824         struct at76_priv *priv = hw->priv;
1825         int ret = 0;
1826
1827         at76_dbg(DBG_MAC80211, "%s()", __func__);
1828
1829         mutex_lock(&priv->mtx);
1830
1831         switch (vif->type) {
1832         case NL80211_IFTYPE_STATION:
1833                 priv->iw_mode = IW_MODE_INFRA;
1834                 break;
1835         default:
1836                 ret = -EOPNOTSUPP;
1837                 goto exit;
1838         }
1839
1840 exit:
1841         mutex_unlock(&priv->mtx);
1842
1843         return ret;
1844 }
1845
1846 static void at76_remove_interface(struct ieee80211_hw *hw,
1847                                   struct ieee80211_vif *vif)
1848 {
1849         at76_dbg(DBG_MAC80211, "%s()", __func__);
1850 }
1851
1852 static void at76_dwork_hw_scan(struct work_struct *work)
1853 {
1854         struct at76_priv *priv = container_of(work, struct at76_priv,
1855                                               dwork_hw_scan.work);
1856         int ret;
1857
1858         if (priv->device_unplugged)
1859                 return;
1860
1861         mutex_lock(&priv->mtx);
1862
1863         ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
1864         at76_dbg(DBG_MAC80211, "%s: CMD_SCAN status 0x%02x", __func__, ret);
1865
1866         /* FIXME: add maximum time for scan to complete */
1867
1868         if (ret != CMD_STATUS_COMPLETE) {
1869                 ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
1870                                              SCAN_POLL_INTERVAL);
1871                 mutex_unlock(&priv->mtx);
1872                 return;
1873         }
1874
1875         if (is_valid_ether_addr(priv->bssid))
1876                 at76_join(priv);
1877
1878         mutex_unlock(&priv->mtx);
1879
1880         ieee80211_scan_completed(priv->hw, false);
1881
1882         ieee80211_wake_queues(priv->hw);
1883 }
1884
1885 static int at76_hw_scan(struct ieee80211_hw *hw,
1886                         struct ieee80211_vif *vif,
1887                         struct cfg80211_scan_request *req)
1888 {
1889         struct at76_priv *priv = hw->priv;
1890         struct at76_req_scan scan;
1891         u8 *ssid = NULL;
1892         int ret, len = 0;
1893
1894         at76_dbg(DBG_MAC80211, "%s():", __func__);
1895
1896         if (priv->device_unplugged)
1897                 return 0;
1898
1899         mutex_lock(&priv->mtx);
1900
1901         ieee80211_stop_queues(hw);
1902
1903         memset(&scan, 0, sizeof(struct at76_req_scan));
1904         memset(scan.bssid, 0xFF, ETH_ALEN);
1905
1906         if (req->n_ssids) {
1907                 scan.scan_type = SCAN_TYPE_ACTIVE;
1908                 ssid = req->ssids[0].ssid;
1909                 len = req->ssids[0].ssid_len;
1910         } else {
1911                 scan.scan_type = SCAN_TYPE_PASSIVE;
1912         }
1913
1914         if (len) {
1915                 memcpy(scan.essid, ssid, len);
1916                 scan.essid_size = len;
1917         }
1918
1919         scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
1920         scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
1921         scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000);
1922         scan.international_scan = 0;
1923
1924         at76_dbg(DBG_MAC80211, "%s: sending CMD_SCAN", __func__);
1925         ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
1926
1927         if (ret < 0) {
1928                 wiphy_err(priv->hw->wiphy, "CMD_SCAN failed: %d\n", ret);
1929                 goto exit;
1930         }
1931
1932         ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
1933                                      SCAN_POLL_INTERVAL);
1934
1935 exit:
1936         mutex_unlock(&priv->mtx);
1937
1938         return 0;
1939 }
1940
1941 static int at76_config(struct ieee80211_hw *hw, u32 changed)
1942 {
1943         struct at76_priv *priv = hw->priv;
1944
1945         at76_dbg(DBG_MAC80211, "%s(): channel %d",
1946                  __func__, hw->conf.chandef.chan->hw_value);
1947         at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:");
1948
1949         mutex_lock(&priv->mtx);
1950
1951         priv->channel = hw->conf.chandef.chan->hw_value;
1952
1953         if (is_valid_ether_addr(priv->bssid))
1954                 at76_join(priv);
1955         else
1956                 at76_start_monitor(priv);
1957
1958         mutex_unlock(&priv->mtx);
1959
1960         return 0;
1961 }
1962
1963 static void at76_bss_info_changed(struct ieee80211_hw *hw,
1964                                   struct ieee80211_vif *vif,
1965                                   struct ieee80211_bss_conf *conf,
1966                                   u32 changed)
1967 {
1968         struct at76_priv *priv = hw->priv;
1969
1970         at76_dbg(DBG_MAC80211, "%s():", __func__);
1971
1972         if (!(changed & BSS_CHANGED_BSSID))
1973                 return;
1974
1975         at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:");
1976
1977         mutex_lock(&priv->mtx);
1978
1979         memcpy(priv->bssid, conf->bssid, ETH_ALEN);
1980
1981         if (is_valid_ether_addr(priv->bssid))
1982                 /* mac80211 is joining a bss */
1983                 at76_join(priv);
1984
1985         mutex_unlock(&priv->mtx);
1986 }
1987
1988 /* must be atomic */
1989 static void at76_configure_filter(struct ieee80211_hw *hw,
1990                                   unsigned int changed_flags,
1991                                   unsigned int *total_flags, u64 multicast)
1992 {
1993         struct at76_priv *priv = hw->priv;
1994         int flags;
1995
1996         at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x "
1997                  "total_flags=0x%08x",
1998                  __func__, changed_flags, *total_flags);
1999
2000         flags = changed_flags & AT76_SUPPORTED_FILTERS;
2001         *total_flags = AT76_SUPPORTED_FILTERS;
2002
2003         /* Bail out after updating flags to prevent a WARN_ON in mac80211. */
2004         if (priv->device_unplugged)
2005                 return;
2006
2007         /* FIXME: access to priv->promisc should be protected with
2008          * priv->mtx, but it's impossible because this function needs to be
2009          * atomic */
2010
2011         if (flags && !priv->promisc) {
2012                 /* mac80211 wants us to enable promiscuous mode */
2013                 priv->promisc = 1;
2014         } else if (!flags && priv->promisc) {
2015                 /* we need to disable promiscuous mode */
2016                 priv->promisc = 0;
2017         } else
2018                 return;
2019
2020         ieee80211_queue_work(hw, &priv->work_set_promisc);
2021 }
2022
2023 static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2024                         struct ieee80211_vif *vif, struct ieee80211_sta *sta,
2025                         struct ieee80211_key_conf *key)
2026 {
2027         struct at76_priv *priv = hw->priv;
2028
2029         int i;
2030
2031         at76_dbg(DBG_MAC80211, "%s(): cmd %d key->cipher %d key->keyidx %d "
2032                  "key->keylen %d",
2033                  __func__, cmd, key->cipher, key->keyidx, key->keylen);
2034
2035         if ((key->cipher != WLAN_CIPHER_SUITE_WEP40) &&
2036             (key->cipher != WLAN_CIPHER_SUITE_WEP104))
2037                 return -EOPNOTSUPP;
2038
2039         key->hw_key_idx = key->keyidx;
2040
2041         mutex_lock(&priv->mtx);
2042
2043         switch (cmd) {
2044         case SET_KEY:
2045                 memcpy(priv->wep_keys[key->keyidx], key->key, key->keylen);
2046                 priv->wep_keys_len[key->keyidx] = key->keylen;
2047
2048                 /* FIXME: find out how to do this properly */
2049                 priv->wep_key_id = key->keyidx;
2050
2051                 break;
2052         case DISABLE_KEY:
2053         default:
2054                 priv->wep_keys_len[key->keyidx] = 0;
2055                 break;
2056         }
2057
2058         priv->wep_enabled = 0;
2059
2060         for (i = 0; i < WEP_KEYS; i++) {
2061                 if (priv->wep_keys_len[i] != 0)
2062                         priv->wep_enabled = 1;
2063         }
2064
2065         at76_startup_device(priv);
2066
2067         mutex_unlock(&priv->mtx);
2068
2069         return 0;
2070 }
2071
2072 static const struct ieee80211_ops at76_ops = {
2073         .tx = at76_mac80211_tx,
2074         .add_interface = at76_add_interface,
2075         .remove_interface = at76_remove_interface,
2076         .config = at76_config,
2077         .bss_info_changed = at76_bss_info_changed,
2078         .configure_filter = at76_configure_filter,
2079         .start = at76_mac80211_start,
2080         .stop = at76_mac80211_stop,
2081         .hw_scan = at76_hw_scan,
2082         .set_key = at76_set_key,
2083 };
2084
2085 /* Allocate network device and initialize private data */
2086 static struct at76_priv *at76_alloc_new_device(struct usb_device *udev)
2087 {
2088         struct ieee80211_hw *hw;
2089         struct at76_priv *priv;
2090
2091         hw = ieee80211_alloc_hw(sizeof(struct at76_priv), &at76_ops);
2092         if (!hw) {
2093                 printk(KERN_ERR DRIVER_NAME ": could not register"
2094                        " ieee80211_hw\n");
2095                 return NULL;
2096         }
2097
2098         priv = hw->priv;
2099         priv->hw = hw;
2100
2101         priv->udev = udev;
2102
2103         mutex_init(&priv->mtx);
2104         INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc);
2105         INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx);
2106         INIT_WORK(&priv->work_join_bssid, at76_work_join_bssid);
2107         INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan);
2108
2109         tasklet_init(&priv->rx_tasklet, at76_rx_tasklet, 0);
2110
2111         priv->pm_mode = AT76_PM_OFF;
2112         priv->pm_period = 0;
2113
2114         /* unit us */
2115         priv->hw->channel_change_time = 100000;
2116
2117         return priv;
2118 }
2119
2120 static int at76_alloc_urbs(struct at76_priv *priv,
2121                            struct usb_interface *interface)
2122 {
2123         struct usb_endpoint_descriptor *endpoint, *ep_in, *ep_out;
2124         int i;
2125         int buffer_size;
2126         struct usb_host_interface *iface_desc;
2127
2128         at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
2129
2130         at76_dbg(DBG_URB, "%s: NumEndpoints %d ", __func__,
2131                  interface->altsetting[0].desc.bNumEndpoints);
2132
2133         ep_in = NULL;
2134         ep_out = NULL;
2135         iface_desc = interface->cur_altsetting;
2136         for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
2137                 endpoint = &iface_desc->endpoint[i].desc;
2138
2139                 at76_dbg(DBG_URB, "%s: %d. endpoint: addr 0x%x attr 0x%x",
2140                          __func__, i, endpoint->bEndpointAddress,
2141                          endpoint->bmAttributes);
2142
2143                 if (!ep_in && usb_endpoint_is_bulk_in(endpoint))
2144                         ep_in = endpoint;
2145
2146                 if (!ep_out && usb_endpoint_is_bulk_out(endpoint))
2147                         ep_out = endpoint;
2148         }
2149
2150         if (!ep_in || !ep_out) {
2151                 dev_err(&interface->dev, "bulk endpoints missing\n");
2152                 return -ENXIO;
2153         }
2154
2155         priv->rx_pipe = usb_rcvbulkpipe(priv->udev, ep_in->bEndpointAddress);
2156         priv->tx_pipe = usb_sndbulkpipe(priv->udev, ep_out->bEndpointAddress);
2157
2158         priv->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
2159         priv->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
2160         if (!priv->rx_urb || !priv->tx_urb) {
2161                 dev_err(&interface->dev, "cannot allocate URB\n");
2162                 return -ENOMEM;
2163         }
2164
2165         buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE;
2166         priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
2167         if (!priv->bulk_out_buffer)
2168                 return -ENOMEM;
2169
2170         at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
2171
2172         return 0;
2173 }
2174
2175 static struct ieee80211_rate at76_rates[] = {
2176         { .bitrate = 10, .hw_value = TX_RATE_1MBIT, },
2177         { .bitrate = 20, .hw_value = TX_RATE_2MBIT, },
2178         { .bitrate = 55, .hw_value = TX_RATE_5_5MBIT, },
2179         { .bitrate = 110, .hw_value = TX_RATE_11MBIT, },
2180 };
2181
2182 static struct ieee80211_channel at76_channels[] = {
2183         { .center_freq = 2412, .hw_value = 1 },
2184         { .center_freq = 2417, .hw_value = 2 },
2185         { .center_freq = 2422, .hw_value = 3 },
2186         { .center_freq = 2427, .hw_value = 4 },
2187         { .center_freq = 2432, .hw_value = 5 },
2188         { .center_freq = 2437, .hw_value = 6 },
2189         { .center_freq = 2442, .hw_value = 7 },
2190         { .center_freq = 2447, .hw_value = 8 },
2191         { .center_freq = 2452, .hw_value = 9 },
2192         { .center_freq = 2457, .hw_value = 10 },
2193         { .center_freq = 2462, .hw_value = 11 },
2194         { .center_freq = 2467, .hw_value = 12 },
2195         { .center_freq = 2472, .hw_value = 13 },
2196         { .center_freq = 2484, .hw_value = 14 }
2197 };
2198
2199 static struct ieee80211_supported_band at76_supported_band = {
2200         .channels = at76_channels,
2201         .n_channels = ARRAY_SIZE(at76_channels),
2202         .bitrates = at76_rates,
2203         .n_bitrates = ARRAY_SIZE(at76_rates),
2204 };
2205
2206 /* Register network device and initialize the hardware */
2207 static int at76_init_new_device(struct at76_priv *priv,
2208                                 struct usb_interface *interface)
2209 {
2210         struct wiphy *wiphy;
2211         size_t len;
2212         int ret;
2213
2214         /* set up the endpoint information */
2215         /* check out the endpoints */
2216
2217         at76_dbg(DBG_DEVSTART, "USB interface: %d endpoints",
2218                  interface->cur_altsetting->desc.bNumEndpoints);
2219
2220         ret = at76_alloc_urbs(priv, interface);
2221         if (ret < 0)
2222                 goto exit;
2223
2224         /* MAC address */
2225         ret = at76_get_hw_config(priv);
2226         if (ret < 0) {
2227                 dev_err(&interface->dev, "cannot get MAC address\n");
2228                 goto exit;
2229         }
2230
2231         priv->domain = at76_get_reg_domain(priv->regulatory_domain);
2232
2233         priv->channel = DEF_CHANNEL;
2234         priv->iw_mode = IW_MODE_INFRA;
2235         priv->rts_threshold = DEF_RTS_THRESHOLD;
2236         priv->frag_threshold = DEF_FRAG_THRESHOLD;
2237         priv->short_retry_limit = DEF_SHORT_RETRY_LIMIT;
2238         priv->txrate = TX_RATE_AUTO;
2239         priv->preamble_type = PREAMBLE_TYPE_LONG;
2240         priv->beacon_period = 100;
2241         priv->auth_mode = WLAN_AUTH_OPEN;
2242         priv->scan_min_time = DEF_SCAN_MIN_TIME;
2243         priv->scan_max_time = DEF_SCAN_MAX_TIME;
2244         priv->scan_mode = SCAN_TYPE_ACTIVE;
2245         priv->device_unplugged = 0;
2246
2247         /* mac80211 initialisation */
2248         wiphy = priv->hw->wiphy;
2249         priv->hw->wiphy->max_scan_ssids = 1;
2250         priv->hw->wiphy->max_scan_ie_len = 0;
2251         priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
2252         priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &at76_supported_band;
2253         priv->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
2254                           IEEE80211_HW_SIGNAL_UNSPEC;
2255         priv->hw->max_signal = 100;
2256
2257         SET_IEEE80211_DEV(priv->hw, &interface->dev);
2258         SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
2259
2260         len = sizeof(wiphy->fw_version);
2261         snprintf(wiphy->fw_version, len, "%d.%d.%d-%d",
2262                  priv->fw_version.major, priv->fw_version.minor,
2263                  priv->fw_version.patch, priv->fw_version.build);
2264
2265         wiphy->hw_version = priv->board_type;
2266
2267         ret = ieee80211_register_hw(priv->hw);
2268         if (ret) {
2269                 printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n",
2270                        ret);
2271                 goto exit;
2272         }
2273
2274         priv->mac80211_registered = 1;
2275
2276         wiphy_info(priv->hw->wiphy, "USB %s, MAC %pM, firmware %d.%d.%d-%d\n",
2277                    dev_name(&interface->dev), priv->mac_addr,
2278                    priv->fw_version.major, priv->fw_version.minor,
2279                    priv->fw_version.patch, priv->fw_version.build);
2280         wiphy_info(priv->hw->wiphy, "regulatory domain 0x%02x: %s\n",
2281                    priv->regulatory_domain, priv->domain->name);
2282
2283 exit:
2284         return ret;
2285 }
2286
2287 static void at76_delete_device(struct at76_priv *priv)
2288 {
2289         at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
2290
2291         /* The device is gone, don't bother turning it off */
2292         priv->device_unplugged = 1;
2293
2294         tasklet_kill(&priv->rx_tasklet);
2295
2296         if (priv->mac80211_registered)
2297                 ieee80211_unregister_hw(priv->hw);
2298
2299         if (priv->tx_urb) {
2300                 usb_kill_urb(priv->tx_urb);
2301                 usb_free_urb(priv->tx_urb);
2302         }
2303         if (priv->rx_urb) {
2304                 usb_kill_urb(priv->rx_urb);
2305                 usb_free_urb(priv->rx_urb);
2306         }
2307
2308         at76_dbg(DBG_PROC_ENTRY, "%s: unlinked urbs", __func__);
2309
2310         kfree(priv->bulk_out_buffer);
2311
2312         del_timer_sync(&ledtrig_tx_timer);
2313
2314         kfree_skb(priv->rx_skb);
2315
2316         usb_put_dev(priv->udev);
2317
2318         at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/ieee80211_hw",
2319                  __func__);
2320         ieee80211_free_hw(priv->hw);
2321
2322         at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
2323 }
2324
2325 static int at76_probe(struct usb_interface *interface,
2326                       const struct usb_device_id *id)
2327 {
2328         int ret;
2329         struct at76_priv *priv;
2330         struct fwentry *fwe;
2331         struct usb_device *udev;
2332         int op_mode;
2333         int need_ext_fw = 0;
2334         struct mib_fw_version fwv;
2335         int board_type = (int)id->driver_info;
2336
2337         udev = usb_get_dev(interface_to_usbdev(interface));
2338
2339         /* Load firmware into kernel memory */
2340         fwe = at76_load_firmware(udev, board_type);
2341         if (!fwe) {
2342                 ret = -ENOENT;
2343                 goto error;
2344         }
2345
2346         op_mode = at76_get_op_mode(udev);
2347
2348         at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
2349
2350         /* we get OPMODE_NONE with 2.4.23, SMC2662W-AR ???
2351            we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */
2352
2353         if (op_mode == OPMODE_HW_CONFIG_MODE) {
2354                 dev_err(&interface->dev,
2355                         "cannot handle a device in HW_CONFIG_MODE\n");
2356                 ret = -EBUSY;
2357                 goto error;
2358         }
2359
2360         if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH
2361             && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
2362                 /* download internal firmware part */
2363                 dev_printk(KERN_DEBUG, &interface->dev,
2364                            "downloading internal firmware\n");
2365                 ret = at76_load_internal_fw(udev, fwe);
2366                 if (ret < 0) {
2367                         dev_err(&interface->dev,
2368                                 "error %d downloading internal firmware\n",
2369                                 ret);
2370                         goto error;
2371                 }
2372                 usb_put_dev(udev);
2373                 return ret;
2374         }
2375
2376         /* Internal firmware already inside the device.  Get firmware
2377          * version to test if external firmware is loaded.
2378          * This works only for newer firmware, e.g. the Intersil 0.90.x
2379          * says "control timeout on ep0in" and subsequent
2380          * at76_get_op_mode() fail too :-( */
2381
2382         /* if version >= 0.100.x.y or device with built-in flash we can
2383          * query the device for the fw version */
2384         if ((fwe->fw_version.major > 0 || fwe->fw_version.minor >= 100)
2385             || (op_mode == OPMODE_NORMAL_NIC_WITH_FLASH)) {
2386                 ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
2387                 if (ret < 0 || (fwv.major | fwv.minor) == 0)
2388                         need_ext_fw = 1;
2389         } else
2390                 /* No way to check firmware version, reload to be sure */
2391                 need_ext_fw = 1;
2392
2393         if (need_ext_fw) {
2394                 dev_printk(KERN_DEBUG, &interface->dev,
2395                            "downloading external firmware\n");
2396
2397                 ret = at76_load_external_fw(udev, fwe);
2398                 if (ret)
2399                         goto error;
2400
2401                 /* Re-check firmware version */
2402                 ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
2403                 if (ret < 0) {
2404                         dev_err(&interface->dev,
2405                                 "error %d getting firmware version\n", ret);
2406                         goto error;
2407                 }
2408         }
2409
2410         priv = at76_alloc_new_device(udev);
2411         if (!priv) {
2412                 ret = -ENOMEM;
2413                 goto error;
2414         }
2415
2416         usb_set_intfdata(interface, priv);
2417
2418         memcpy(&priv->fw_version, &fwv, sizeof(struct mib_fw_version));
2419         priv->board_type = board_type;
2420
2421         ret = at76_init_new_device(priv, interface);
2422         if (ret < 0)
2423                 at76_delete_device(priv);
2424
2425         return ret;
2426
2427 error:
2428         usb_put_dev(udev);
2429         return ret;
2430 }
2431
2432 static void at76_disconnect(struct usb_interface *interface)
2433 {
2434         struct at76_priv *priv;
2435
2436         priv = usb_get_intfdata(interface);
2437         usb_set_intfdata(interface, NULL);
2438
2439         /* Disconnect after loading internal firmware */
2440         if (!priv)
2441                 return;
2442
2443         wiphy_info(priv->hw->wiphy, "disconnecting\n");
2444         at76_delete_device(priv);
2445         dev_info(&interface->dev, "disconnected\n");
2446 }
2447
2448 /* Structure for registering this driver with the USB subsystem */
2449 static struct usb_driver at76_driver = {
2450         .name = DRIVER_NAME,
2451         .probe = at76_probe,
2452         .disconnect = at76_disconnect,
2453         .id_table = dev_table,
2454         .disable_hub_initiated_lpm = 1,
2455 };
2456
2457 static int __init at76_mod_init(void)
2458 {
2459         int result;
2460
2461         printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " loading\n");
2462
2463         mutex_init(&fw_mutex);
2464
2465         /* register this driver with the USB subsystem */
2466         result = usb_register(&at76_driver);
2467         if (result < 0)
2468                 printk(KERN_ERR DRIVER_NAME
2469                        ": usb_register failed (status %d)\n", result);
2470
2471         led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
2472         return result;
2473 }
2474
2475 static void __exit at76_mod_exit(void)
2476 {
2477         int i;
2478
2479         printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " unloading\n");
2480         usb_deregister(&at76_driver);
2481         for (i = 0; i < ARRAY_SIZE(firmwares); i++)
2482                 release_firmware(firmwares[i].fw);
2483         led_trigger_unregister_simple(ledtrig_tx);
2484 }
2485
2486 module_param_named(debug, at76_debug, uint, 0600);
2487 MODULE_PARM_DESC(debug, "Debugging level");
2488
2489 module_init(at76_mod_init);
2490 module_exit(at76_mod_exit);
2491
2492 MODULE_AUTHOR("Oliver Kurth <oku@masqmail.cx>");
2493 MODULE_AUTHOR("Joerg Albert <joerg.albert@gmx.de>");
2494 MODULE_AUTHOR("Alex <alex@foogod.com>");
2495 MODULE_AUTHOR("Nick Jones");
2496 MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453@hotmail.com>");
2497 MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
2498 MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>");
2499 MODULE_AUTHOR("Kalle Valo <kalle.valo@iki.fi>");
2500 MODULE_AUTHOR("Sebastian Smolorz <sesmo@gmx.net>");
2501 MODULE_DESCRIPTION(DRIVER_DESC);
2502 MODULE_LICENSE("GPL");