ath6kl: create ath6kl_core.ko
[cascardo/linux.git] / drivers / net / wireless / ath / ath6kl / core.c
1 /*
2  * Copyright (c) 2004-2011 Atheros Communications Inc.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16
17 #include "core.h"
18
19 #include <linux/module.h>
20 #include <linux/moduleparam.h>
21 #include <linux/export.h>
22
23 #include "debug.h"
24 #include "hif-ops.h"
25 #include "cfg80211.h"
26
27 unsigned int debug_mask;
28 static bool suspend_cutpower;
29 static unsigned int uart_debug;
30 static unsigned int ath6kl_p2p;
31
32 module_param(debug_mask, uint, 0644);
33 module_param(suspend_cutpower, bool, 0444);
34 module_param(uart_debug, uint, 0644);
35 module_param(ath6kl_p2p, uint, 0644);
36
37 int ath6kl_core_init(struct ath6kl *ar)
38 {
39         struct ath6kl_bmi_target_info targ_info;
40         struct net_device *ndev;
41         int ret = 0, i;
42
43         ar->ath6kl_wq = create_singlethread_workqueue("ath6kl");
44         if (!ar->ath6kl_wq)
45                 return -ENOMEM;
46
47         ret = ath6kl_bmi_init(ar);
48         if (ret)
49                 goto err_wq;
50
51         /*
52          * Turn on power to get hardware (target) version and leave power
53          * on delibrately as we will boot the hardware anyway within few
54          * seconds.
55          */
56         ret = ath6kl_hif_power_on(ar);
57         if (ret)
58                 goto err_bmi_cleanup;
59
60         ret = ath6kl_bmi_get_target_info(ar, &targ_info);
61         if (ret)
62                 goto err_power_off;
63
64         ar->version.target_ver = le32_to_cpu(targ_info.version);
65         ar->target_type = le32_to_cpu(targ_info.type);
66         ar->wiphy->hw_version = le32_to_cpu(targ_info.version);
67
68         ret = ath6kl_init_hw_params(ar);
69         if (ret)
70                 goto err_power_off;
71
72         ar->htc_target = ath6kl_htc_create(ar);
73
74         if (!ar->htc_target) {
75                 ret = -ENOMEM;
76                 goto err_power_off;
77         }
78
79         ret = ath6kl_init_fetch_firmwares(ar);
80         if (ret)
81                 goto err_htc_cleanup;
82
83         /* FIXME: we should free all firmwares in the error cases below */
84
85         /* Indicate that WMI is enabled (although not ready yet) */
86         set_bit(WMI_ENABLED, &ar->flag);
87         ar->wmi = ath6kl_wmi_init(ar);
88         if (!ar->wmi) {
89                 ath6kl_err("failed to initialize wmi\n");
90                 ret = -EIO;
91                 goto err_htc_cleanup;
92         }
93
94         ath6kl_dbg(ATH6KL_DBG_TRC, "%s: got wmi @ 0x%p.\n", __func__, ar->wmi);
95
96         ret = ath6kl_cfg80211_init(ar);
97         if (ret)
98                 goto err_node_cleanup;
99
100         ret = ath6kl_debug_init(ar);
101         if (ret) {
102                 wiphy_unregister(ar->wiphy);
103                 goto err_node_cleanup;
104         }
105
106         for (i = 0; i < ar->vif_max; i++)
107                 ar->avail_idx_map |= BIT(i);
108
109         rtnl_lock();
110
111         /* Add an initial station interface */
112         ndev = ath6kl_interface_add(ar, "wlan%d", NL80211_IFTYPE_STATION, 0,
113                                     INFRA_NETWORK);
114
115         rtnl_unlock();
116
117         if (!ndev) {
118                 ath6kl_err("Failed to instantiate a network device\n");
119                 ret = -ENOMEM;
120                 wiphy_unregister(ar->wiphy);
121                 goto err_debug_init;
122         }
123
124
125         ath6kl_dbg(ATH6KL_DBG_TRC, "%s: name=%s dev=0x%p, ar=0x%p\n",
126                         __func__, ndev->name, ndev, ar);
127
128         /* setup access class priority mappings */
129         ar->ac_stream_pri_map[WMM_AC_BK] = 0; /* lowest  */
130         ar->ac_stream_pri_map[WMM_AC_BE] = 1;
131         ar->ac_stream_pri_map[WMM_AC_VI] = 2;
132         ar->ac_stream_pri_map[WMM_AC_VO] = 3; /* highest */
133
134         /* give our connected endpoints some buffers */
135         ath6kl_rx_refill(ar->htc_target, ar->ctrl_ep);
136         ath6kl_rx_refill(ar->htc_target, ar->ac2ep_map[WMM_AC_BE]);
137
138         /* allocate some buffers that handle larger AMSDU frames */
139         ath6kl_refill_amsdu_rxbufs(ar, ATH6KL_MAX_AMSDU_RX_BUFFERS);
140
141         ath6kl_cookie_init(ar);
142
143         ar->conf_flags = ATH6KL_CONF_IGNORE_ERP_BARKER |
144                          ATH6KL_CONF_ENABLE_11N | ATH6KL_CONF_ENABLE_TX_BURST;
145
146         if (suspend_cutpower)
147                 ar->conf_flags |= ATH6KL_CONF_SUSPEND_CUTPOWER;
148
149         if (uart_debug)
150                 ar->conf_flags |= ATH6KL_CONF_UART_DEBUG;
151
152         ar->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM |
153                             WIPHY_FLAG_HAVE_AP_SME |
154                             WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL |
155                             WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
156
157         if (test_bit(ATH6KL_FW_CAPABILITY_SCHED_SCAN, ar->fw_capabilities))
158                 ar->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
159
160         ar->wiphy->probe_resp_offload =
161                 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
162                 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
163                 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P |
164                 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U;
165
166         set_bit(FIRST_BOOT, &ar->flag);
167
168         ndev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
169
170         ret = ath6kl_init_hw_start(ar);
171         if (ret) {
172                 ath6kl_err("Failed to start hardware: %d\n", ret);
173                 goto err_rxbuf_cleanup;
174         }
175
176         /*
177          * Set mac address which is received in ready event
178          * FIXME: Move to ath6kl_interface_add()
179          */
180         memcpy(ndev->dev_addr, ar->mac_addr, ETH_ALEN);
181
182         return ret;
183
184 err_rxbuf_cleanup:
185         ath6kl_htc_flush_rx_buf(ar->htc_target);
186         ath6kl_cleanup_amsdu_rxbufs(ar);
187         rtnl_lock();
188         ath6kl_cfg80211_vif_cleanup(netdev_priv(ndev));
189         rtnl_unlock();
190         wiphy_unregister(ar->wiphy);
191 err_debug_init:
192         ath6kl_debug_cleanup(ar);
193 err_node_cleanup:
194         ath6kl_wmi_shutdown(ar->wmi);
195         clear_bit(WMI_ENABLED, &ar->flag);
196         ar->wmi = NULL;
197 err_htc_cleanup:
198         ath6kl_htc_cleanup(ar->htc_target);
199 err_power_off:
200         ath6kl_hif_power_off(ar);
201 err_bmi_cleanup:
202         ath6kl_bmi_cleanup(ar);
203 err_wq:
204         destroy_workqueue(ar->ath6kl_wq);
205
206         return ret;
207 }
208 EXPORT_SYMBOL(ath6kl_core_init);
209
210 struct ath6kl *ath6kl_core_create(struct device *dev)
211 {
212         struct ath6kl *ar;
213         u8 ctr;
214
215         ar = ath6kl_cfg80211_create();
216         if (!ar)
217                 return NULL;
218
219         ar->p2p = !!ath6kl_p2p;
220         ar->dev = dev;
221
222         ar->vif_max = 1;
223
224         ar->max_norm_iface = 1;
225
226         spin_lock_init(&ar->lock);
227         spin_lock_init(&ar->mcastpsq_lock);
228         spin_lock_init(&ar->list_lock);
229
230         init_waitqueue_head(&ar->event_wq);
231         sema_init(&ar->sem, 1);
232
233         INIT_LIST_HEAD(&ar->amsdu_rx_buffer_queue);
234         INIT_LIST_HEAD(&ar->vif_list);
235
236         clear_bit(WMI_ENABLED, &ar->flag);
237         clear_bit(SKIP_SCAN, &ar->flag);
238         clear_bit(DESTROY_IN_PROGRESS, &ar->flag);
239
240         ar->listen_intvl_b = A_DEFAULT_LISTEN_INTERVAL;
241         ar->tx_pwr = 0;
242
243         ar->intra_bss = 1;
244         ar->lrssi_roam_threshold = DEF_LRSSI_ROAM_THRESHOLD;
245
246         ar->state = ATH6KL_STATE_OFF;
247
248         memset((u8 *)ar->sta_list, 0,
249                AP_MAX_NUM_STA * sizeof(struct ath6kl_sta));
250
251         /* Init the PS queues */
252         for (ctr = 0; ctr < AP_MAX_NUM_STA; ctr++) {
253                 spin_lock_init(&ar->sta_list[ctr].psq_lock);
254                 skb_queue_head_init(&ar->sta_list[ctr].psq);
255                 skb_queue_head_init(&ar->sta_list[ctr].apsdq);
256         }
257
258         skb_queue_head_init(&ar->mcastpsq);
259
260         memcpy(ar->ap_country_code, DEF_AP_COUNTRY_CODE, 3);
261
262         return ar;
263 }
264 EXPORT_SYMBOL(ath6kl_core_create);
265
266 void ath6kl_core_cleanup(struct ath6kl *ar)
267 {
268         ath6kl_hif_power_off(ar);
269
270         destroy_workqueue(ar->ath6kl_wq);
271
272         if (ar->htc_target)
273                 ath6kl_htc_cleanup(ar->htc_target);
274
275         ath6kl_cookie_cleanup(ar);
276
277         ath6kl_cleanup_amsdu_rxbufs(ar);
278
279         ath6kl_bmi_cleanup(ar);
280
281         ath6kl_debug_cleanup(ar);
282
283         kfree(ar->fw_board);
284         kfree(ar->fw_otp);
285         kfree(ar->fw);
286         kfree(ar->fw_patch);
287         kfree(ar->fw_testscript);
288
289         ath6kl_cfg80211_cleanup(ar);
290 }
291 EXPORT_SYMBOL(ath6kl_core_cleanup);
292
293 void ath6kl_core_destroy(struct ath6kl *ar)
294 {
295         ath6kl_cfg80211_destroy(ar);
296 }
297 EXPORT_SYMBOL(ath6kl_core_destroy);
298
299 MODULE_AUTHOR("Qualcomm Atheros");
300 MODULE_DESCRIPTION("Core module for AR600x SDIO and USB devices.");
301 MODULE_LICENSE("Dual BSD/GPL");