drivers/net/wireless/b43/main.c

   1 /*
   2
   3   Broadcom B43 wireless driver
   4
   5   Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
   6   Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it>
   7   Copyright (c) 2005-2009 Michael Buesch <m@bues.ch>
   8   Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
   9   Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
  10   Copyright (c) 2010-2011 Rafał Miłecki <zajec5@gmail.com>
  11
  12   SDIO support
  13   Copyright (c) 2009 Albert Herranz <albert_herranz@yahoo.es>
  14
  15   Some parts of the code in this file are derived from the ipw2200
  16   driver  Copyright(c) 2003 - 2004 Intel Corporation.
  17
  18   This program is free software; you can redistribute it and/or modify
  19   it under the terms of the GNU General Public License as published by
  20   the Free Software Foundation; either version 2 of the License, or
  21   (at your option) any later version.
  22
  23   This program is distributed in the hope that it will be useful,
  24   but WITHOUT ANY WARRANTY; without even the implied warranty of
  25   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  26   GNU General Public License for more details.
  27
  28   You should have received a copy of the GNU General Public License
  29   along with this program; see the file COPYING.  If not, write to
  30   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
  31   Boston, MA 02110-1301, USA.
  32
  33 */
  34
  35 #include <linux/delay.h>
  36 #include <linux/init.h>
  37 #include <linux/module.h>
  38 #include <linux/if_arp.h>
  39 #include <linux/etherdevice.h>
  40 #include <linux/firmware.h>
  41 #include <linux/workqueue.h>
  42 #include <linux/skbuff.h>
  43 #include <linux/io.h>
  44 #include <linux/dma-mapping.h>
  45 #include <linux/slab.h>
  46 #include <asm/unaligned.h>
  47
  48 #include "b43.h"
  49 #include "main.h"
  50 #include "debugfs.h"
  51 #include "phy_common.h"
  52 #include "phy_g.h"
  53 #include "phy_n.h"
  54 #include "dma.h"
  55 #include "pio.h"
  56 #include "sysfs.h"
  57 #include "xmit.h"
  58 #include "lo.h"
  59 #include "pcmcia.h"
  60 #include "sdio.h"
  61 #include <linux/mmc/sdio_func.h>
  62
  63 MODULE_DESCRIPTION("Broadcom B43 wireless driver");
  64 MODULE_AUTHOR("Martin Langer");
  65 MODULE_AUTHOR("Stefano Brivio");
  66 MODULE_AUTHOR("Michael Buesch");
  67 MODULE_AUTHOR("Gábor Stefanik");
  68 MODULE_AUTHOR("Rafał Miłecki");
  69 MODULE_LICENSE("GPL");
  70
  71 MODULE_FIRMWARE("b43/ucode11.fw");
  72 MODULE_FIRMWARE("b43/ucode13.fw");
  73 MODULE_FIRMWARE("b43/ucode14.fw");
  74 MODULE_FIRMWARE("b43/ucode15.fw");
  75 MODULE_FIRMWARE("b43/ucode16_mimo.fw");
  76 MODULE_FIRMWARE("b43/ucode5.fw");
  77 MODULE_FIRMWARE("b43/ucode9.fw");
  78
  79 static int modparam_bad_frames_preempt;
  80 module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
  81 MODULE_PARM_DESC(bad_frames_preempt,
  82                  "enable(1) / disable(0) Bad Frames Preemption");
  83
  84 static char modparam_fwpostfix[16];
  85 module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);
  86 MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load.");
  87
  88 static int modparam_hwpctl;
  89 module_param_named(hwpctl, modparam_hwpctl, int, 0444);
  90 MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)");
  91
  92 static int modparam_nohwcrypt;
  93 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
  94 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  95
  96 static int modparam_hwtkip;
  97 module_param_named(hwtkip, modparam_hwtkip, int, 0444);
  98 MODULE_PARM_DESC(hwtkip, "Enable hardware tkip.");
  99
 100 static int modparam_qos = 1;
 101 module_param_named(qos, modparam_qos, int, 0444);
 102 MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
 103
 104 static int modparam_btcoex = 1;
 105 module_param_named(btcoex, modparam_btcoex, int, 0444);
 106 MODULE_PARM_DESC(btcoex, "Enable Bluetooth coexistence (default on)");
 107
 108 int b43_modparam_verbose = B43_VERBOSITY_DEFAULT;
 109 module_param_named(verbose, b43_modparam_verbose, int, 0644);
 110 MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug");
 111
 112 static int b43_modparam_pio = 0;
 113 module_param_named(pio, b43_modparam_pio, int, 0644);
 114 MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
 115
 116 static int modparam_allhwsupport = !IS_ENABLED(CONFIG_BRCMSMAC);
 117 module_param_named(allhwsupport, modparam_allhwsupport, int, 0444);
 118 MODULE_PARM_DESC(allhwsupport, "Enable support for all hardware (even it if overlaps with the brcmsmac driver)");
 119
 120 #ifdef CONFIG_B43_BCMA
 121 static const struct bcma_device_id b43_bcma_tbl[] = {
 122         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x11, BCMA_ANY_CLASS),
 123         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x17, BCMA_ANY_CLASS),
 124         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x18, BCMA_ANY_CLASS),
 125         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1C, BCMA_ANY_CLASS),
 126         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1D, BCMA_ANY_CLASS),
 127         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1E, BCMA_ANY_CLASS),
 128         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x28, BCMA_ANY_CLASS),
 129         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x2A, BCMA_ANY_CLASS),
 130         BCMA_CORETABLE_END
 131 };
 132 MODULE_DEVICE_TABLE(bcma, b43_bcma_tbl);
 133 #endif
 134
 135 #ifdef CONFIG_B43_SSB
 136 static const struct ssb_device_id b43_ssb_tbl[] = {
 137         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
 138         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6),
 139         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7),
 140         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9),
 141         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10),
 142         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11),
 143         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 12),
 144         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13),
 145         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 15),
 146         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 16),
 147         SSB_DEVTABLE_END
 148 };
 149 MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl);
 150 #endif
 151
 152 /* Channel and ratetables are shared for all devices.
 153  * They can't be const, because ieee80211 puts some precalculated
 154  * data in there. This data is the same for all devices, so we don't
 155  * get concurrency issues */
 156 #define RATETAB_ENT(_rateid, _flags) \
 157         {                                                               \
 158                 .bitrate        = B43_RATE_TO_BASE100KBPS(_rateid),     \
 159                 .hw_value       = (_rateid),                            \
 160                 .flags          = (_flags),                             \
 161         }
 162
 163 /*
 164  * NOTE: When changing this, sync with xmit.c's
 165  *       b43_plcp_get_bitrate_idx_* functions!
 166  */
 167 static struct ieee80211_rate __b43_ratetable[] = {
 168         RATETAB_ENT(B43_CCK_RATE_1MB, 0),
 169         RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE),
 170         RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE),
 171         RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE),
 172         RATETAB_ENT(B43_OFDM_RATE_6MB, 0),
 173         RATETAB_ENT(B43_OFDM_RATE_9MB, 0),
 174         RATETAB_ENT(B43_OFDM_RATE_12MB, 0),
 175         RATETAB_ENT(B43_OFDM_RATE_18MB, 0),
 176         RATETAB_ENT(B43_OFDM_RATE_24MB, 0),
 177         RATETAB_ENT(B43_OFDM_RATE_36MB, 0),
 178         RATETAB_ENT(B43_OFDM_RATE_48MB, 0),
 179         RATETAB_ENT(B43_OFDM_RATE_54MB, 0),
 180 };
 181
 182 #define b43_a_ratetable         (__b43_ratetable + 4)
 183 #define b43_a_ratetable_size    8
 184 #define b43_b_ratetable         (__b43_ratetable + 0)
 185 #define b43_b_ratetable_size    4
 186 #define b43_g_ratetable         (__b43_ratetable + 0)
 187 #define b43_g_ratetable_size    12
 188
 189 #define CHAN2G(_channel, _freq, _flags) {                       \
 190         .band                   = IEEE80211_BAND_2GHZ,          \
 191         .center_freq            = (_freq),                      \
 192         .hw_value               = (_channel),                   \
 193         .flags                  = (_flags),                     \
 194         .max_antenna_gain       = 0,                            \
 195         .max_power              = 30,                           \
 196 }
 197 static struct ieee80211_channel b43_2ghz_chantable[] = {
 198         CHAN2G(1, 2412, 0),
 199         CHAN2G(2, 2417, 0),
 200         CHAN2G(3, 2422, 0),
 201         CHAN2G(4, 2427, 0),
 202         CHAN2G(5, 2432, 0),
 203         CHAN2G(6, 2437, 0),
 204         CHAN2G(7, 2442, 0),
 205         CHAN2G(8, 2447, 0),
 206         CHAN2G(9, 2452, 0),
 207         CHAN2G(10, 2457, 0),
 208         CHAN2G(11, 2462, 0),
 209         CHAN2G(12, 2467, 0),
 210         CHAN2G(13, 2472, 0),
 211         CHAN2G(14, 2484, 0),
 212 };
 213
 214 /* No support for the last 3 channels (12, 13, 14) */
 215 #define b43_2ghz_chantable_limited_size         11
 216 #undef CHAN2G
 217
 218 #define CHAN4G(_channel, _flags) {                              \
 219         .band                   = IEEE80211_BAND_5GHZ,          \
 220         .center_freq            = 4000 + (5 * (_channel)),      \
 221         .hw_value               = (_channel),                   \
 222         .flags                  = (_flags),                     \
 223         .max_antenna_gain       = 0,                            \
 224         .max_power              = 30,                           \
 225 }
 226 #define CHAN5G(_channel, _flags) {                              \
 227         .band                   = IEEE80211_BAND_5GHZ,          \
 228         .center_freq            = 5000 + (5 * (_channel)),      \
 229         .hw_value               = (_channel),                   \
 230         .flags                  = (_flags),                     \
 231         .max_antenna_gain       = 0,                            \
 232         .max_power              = 30,                           \
 233 }
 234 static struct ieee80211_channel b43_5ghz_nphy_chantable[] = {
 235         CHAN4G(184, 0),         CHAN4G(186, 0),
 236         CHAN4G(188, 0),         CHAN4G(190, 0),
 237         CHAN4G(192, 0),         CHAN4G(194, 0),
 238         CHAN4G(196, 0),         CHAN4G(198, 0),
 239         CHAN4G(200, 0),         CHAN4G(202, 0),
 240         CHAN4G(204, 0),         CHAN4G(206, 0),
 241         CHAN4G(208, 0),         CHAN4G(210, 0),
 242         CHAN4G(212, 0),         CHAN4G(214, 0),
 243         CHAN4G(216, 0),         CHAN4G(218, 0),
 244         CHAN4G(220, 0),         CHAN4G(222, 0),
 245         CHAN4G(224, 0),         CHAN4G(226, 0),
 246         CHAN4G(228, 0),
 247         CHAN5G(32, 0),          CHAN5G(34, 0),
 248         CHAN5G(36, 0),          CHAN5G(38, 0),
 249         CHAN5G(40, 0),          CHAN5G(42, 0),
 250         CHAN5G(44, 0),          CHAN5G(46, 0),
 251         CHAN5G(48, 0),          CHAN5G(50, 0),
 252         CHAN5G(52, 0),          CHAN5G(54, 0),
 253         CHAN5G(56, 0),          CHAN5G(58, 0),
 254         CHAN5G(60, 0),          CHAN5G(62, 0),
 255         CHAN5G(64, 0),          CHAN5G(66, 0),
 256         CHAN5G(68, 0),          CHAN5G(70, 0),
 257         CHAN5G(72, 0),          CHAN5G(74, 0),
 258         CHAN5G(76, 0),          CHAN5G(78, 0),
 259         CHAN5G(80, 0),          CHAN5G(82, 0),
 260         CHAN5G(84, 0),          CHAN5G(86, 0),
 261         CHAN5G(88, 0),          CHAN5G(90, 0),
 262         CHAN5G(92, 0),          CHAN5G(94, 0),
 263         CHAN5G(96, 0),          CHAN5G(98, 0),
 264         CHAN5G(100, 0),         CHAN5G(102, 0),
 265         CHAN5G(104, 0),         CHAN5G(106, 0),
 266         CHAN5G(108, 0),         CHAN5G(110, 0),
 267         CHAN5G(112, 0),         CHAN5G(114, 0),
 268         CHAN5G(116, 0),         CHAN5G(118, 0),
 269         CHAN5G(120, 0),         CHAN5G(122, 0),
 270         CHAN5G(124, 0),         CHAN5G(126, 0),
 271         CHAN5G(128, 0),         CHAN5G(130, 0),
 272         CHAN5G(132, 0),         CHAN5G(134, 0),
 273         CHAN5G(136, 0),         CHAN5G(138, 0),
 274         CHAN5G(140, 0),         CHAN5G(142, 0),
 275         CHAN5G(144, 0),         CHAN5G(145, 0),
 276         CHAN5G(146, 0),         CHAN5G(147, 0),
 277         CHAN5G(148, 0),         CHAN5G(149, 0),
 278         CHAN5G(150, 0),         CHAN5G(151, 0),
 279         CHAN5G(152, 0),         CHAN5G(153, 0),
 280         CHAN5G(154, 0),         CHAN5G(155, 0),
 281         CHAN5G(156, 0),         CHAN5G(157, 0),
 282         CHAN5G(158, 0),         CHAN5G(159, 0),
 283         CHAN5G(160, 0),         CHAN5G(161, 0),
 284         CHAN5G(162, 0),         CHAN5G(163, 0),
 285         CHAN5G(164, 0),         CHAN5G(165, 0),
 286         CHAN5G(166, 0),         CHAN5G(168, 0),
 287         CHAN5G(170, 0),         CHAN5G(172, 0),
 288         CHAN5G(174, 0),         CHAN5G(176, 0),
 289         CHAN5G(178, 0),         CHAN5G(180, 0),
 290         CHAN5G(182, 0),
 291 };
 292
 293 static struct ieee80211_channel b43_5ghz_nphy_chantable_limited[] = {
 294         CHAN5G(36, 0),          CHAN5G(40, 0),
 295         CHAN5G(44, 0),          CHAN5G(48, 0),
 296         CHAN5G(149, 0),         CHAN5G(153, 0),
 297         CHAN5G(157, 0),         CHAN5G(161, 0),
 298         CHAN5G(165, 0),
 299 };
 300
 301 static struct ieee80211_channel b43_5ghz_aphy_chantable[] = {
 302         CHAN5G(34, 0),          CHAN5G(36, 0),
 303         CHAN5G(38, 0),          CHAN5G(40, 0),
 304         CHAN5G(42, 0),          CHAN5G(44, 0),
 305         CHAN5G(46, 0),          CHAN5G(48, 0),
 306         CHAN5G(52, 0),          CHAN5G(56, 0),
 307         CHAN5G(60, 0),          CHAN5G(64, 0),
 308         CHAN5G(100, 0),         CHAN5G(104, 0),
 309         CHAN5G(108, 0),         CHAN5G(112, 0),
 310         CHAN5G(116, 0),         CHAN5G(120, 0),
 311         CHAN5G(124, 0),         CHAN5G(128, 0),
 312         CHAN5G(132, 0),         CHAN5G(136, 0),
 313         CHAN5G(140, 0),         CHAN5G(149, 0),
 314         CHAN5G(153, 0),         CHAN5G(157, 0),
 315         CHAN5G(161, 0),         CHAN5G(165, 0),
 316         CHAN5G(184, 0),         CHAN5G(188, 0),
 317         CHAN5G(192, 0),         CHAN5G(196, 0),
 318         CHAN5G(200, 0),         CHAN5G(204, 0),
 319         CHAN5G(208, 0),         CHAN5G(212, 0),
 320         CHAN5G(216, 0),
 321 };
 322 #undef CHAN4G
 323 #undef CHAN5G
 324
 325 static struct ieee80211_supported_band b43_band_5GHz_nphy = {
 326         .band           = IEEE80211_BAND_5GHZ,
 327         .channels       = b43_5ghz_nphy_chantable,
 328         .n_channels     = ARRAY_SIZE(b43_5ghz_nphy_chantable),
 329         .bitrates       = b43_a_ratetable,
 330         .n_bitrates     = b43_a_ratetable_size,
 331 };
 332
 333 static struct ieee80211_supported_band b43_band_5GHz_nphy_limited = {
 334         .band           = IEEE80211_BAND_5GHZ,
 335         .channels       = b43_5ghz_nphy_chantable_limited,
 336         .n_channels     = ARRAY_SIZE(b43_5ghz_nphy_chantable_limited),
 337         .bitrates       = b43_a_ratetable,
 338         .n_bitrates     = b43_a_ratetable_size,
 339 };
 340
 341 static struct ieee80211_supported_band b43_band_5GHz_aphy = {
 342         .band           = IEEE80211_BAND_5GHZ,
 343         .channels       = b43_5ghz_aphy_chantable,
 344         .n_channels     = ARRAY_SIZE(b43_5ghz_aphy_chantable),
 345         .bitrates       = b43_a_ratetable,
 346         .n_bitrates     = b43_a_ratetable_size,
 347 };
 348
 349 static struct ieee80211_supported_band b43_band_2GHz = {
 350         .band           = IEEE80211_BAND_2GHZ,
 351         .channels       = b43_2ghz_chantable,
 352         .n_channels     = ARRAY_SIZE(b43_2ghz_chantable),
 353         .bitrates       = b43_g_ratetable,
 354         .n_bitrates     = b43_g_ratetable_size,
 355 };
 356
 357 static struct ieee80211_supported_band b43_band_2ghz_limited = {
 358         .band           = IEEE80211_BAND_2GHZ,
 359         .channels       = b43_2ghz_chantable,
 360         .n_channels     = b43_2ghz_chantable_limited_size,
 361         .bitrates       = b43_g_ratetable,
 362         .n_bitrates     = b43_g_ratetable_size,
 363 };
 364
 365 static void b43_wireless_core_exit(struct b43_wldev *dev);
 366 static int b43_wireless_core_init(struct b43_wldev *dev);
 367 static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev);
 368 static int b43_wireless_core_start(struct b43_wldev *dev);
 369 static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
 370                                     struct ieee80211_vif *vif,
 371                                     struct ieee80211_bss_conf *conf,
 372                                     u32 changed);
 373
 374 static int b43_ratelimit(struct b43_wl *wl)
 375 {
 376         if (!wl || !wl->current_dev)
 377                 return 1;
 378         if (b43_status(wl->current_dev) < B43_STAT_STARTED)
 379                 return 1;
 380         /* We are up and running.
 381          * Ratelimit the messages to avoid DoS over the net. */
 382         return net_ratelimit();
 383 }
 384
 385 void b43info(struct b43_wl *wl, const char *fmt, ...)
 386 {
 387         struct va_format vaf;
 388         va_list args;
 389
 390         if (b43_modparam_verbose < B43_VERBOSITY_INFO)
 391                 return;
 392         if (!b43_ratelimit(wl))
 393                 return;
 394
 395         va_start(args, fmt);
 396
 397         vaf.fmt = fmt;
 398         vaf.va = &args;
 399
 400         printk(KERN_INFO "b43-%s: %pV",
 401                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
 402
 403         va_end(args);
 404 }
 405
 406 void b43err(struct b43_wl *wl, const char *fmt, ...)
 407 {
 408         struct va_format vaf;
 409         va_list args;
 410
 411         if (b43_modparam_verbose < B43_VERBOSITY_ERROR)
 412                 return;
 413         if (!b43_ratelimit(wl))
 414                 return;
 415
 416         va_start(args, fmt);
 417
 418         vaf.fmt = fmt;
 419         vaf.va = &args;
 420
 421         printk(KERN_ERR "b43-%s ERROR: %pV",
 422                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
 423
 424         va_end(args);
 425 }
 426
 427 void b43warn(struct b43_wl *wl, const char *fmt, ...)
 428 {
 429         struct va_format vaf;
 430         va_list args;
 431
 432         if (b43_modparam_verbose < B43_VERBOSITY_WARN)
 433                 return;
 434         if (!b43_ratelimit(wl))
 435                 return;
 436
 437         va_start(args, fmt);
 438
 439         vaf.fmt = fmt;
 440         vaf.va = &args;
 441
 442         printk(KERN_WARNING "b43-%s warning: %pV",
 443                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
 444
 445         va_end(args);
 446 }
 447
 448 void b43dbg(struct b43_wl *wl, const char *fmt, ...)
 449 {
 450         struct va_format vaf;
 451         va_list args;
 452
 453         if (b43_modparam_verbose < B43_VERBOSITY_DEBUG)
 454                 return;
 455
 456         va_start(args, fmt);
 457
 458         vaf.fmt = fmt;
 459         vaf.va = &args;
 460
 461         printk(KERN_DEBUG "b43-%s debug: %pV",
 462                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
 463
 464         va_end(args);
 465 }
 466
 467 static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val)
 468 {
 469         u32 macctl;
 470
 471         B43_WARN_ON(offset % 4 != 0);
 472
 473         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 474         if (macctl & B43_MACCTL_BE)
 475                 val = swab32(val);
 476
 477         b43_write32(dev, B43_MMIO_RAM_CONTROL, offset);
 478         mmiowb();
 479         b43_write32(dev, B43_MMIO_RAM_DATA, val);
 480 }
 481
 482 static inline void b43_shm_control_word(struct b43_wldev *dev,
 483                                         u16 routing, u16 offset)
 484 {
 485         u32 control;
 486
 487         /* "offset" is the WORD offset. */
 488         control = routing;
 489         control <<= 16;
 490         control |= offset;
 491         b43_write32(dev, B43_MMIO_SHM_CONTROL, control);
 492 }
 493
 494 u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
 495 {
 496         u32 ret;
 497
 498         if (routing == B43_SHM_SHARED) {
 499                 B43_WARN_ON(offset & 0x0001);
 500                 if (offset & 0x0003) {
 501                         /* Unaligned access */
 502                         b43_shm_control_word(dev, routing, offset >> 2);
 503                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 504                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 505                         ret |= ((u32)b43_read16(dev, B43_MMIO_SHM_DATA)) << 16;
 506
 507                         goto out;
 508                 }
 509                 offset >>= 2;
 510         }
 511         b43_shm_control_word(dev, routing, offset);
 512         ret = b43_read32(dev, B43_MMIO_SHM_DATA);
 513 out:
 514         return ret;
 515 }
 516
 517 u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
 518 {
 519         u16 ret;
 520
 521         if (routing == B43_SHM_SHARED) {
 522                 B43_WARN_ON(offset & 0x0001);
 523                 if (offset & 0x0003) {
 524                         /* Unaligned access */
 525                         b43_shm_control_word(dev, routing, offset >> 2);
 526                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 527
 528                         goto out;
 529                 }
 530                 offset >>= 2;
 531         }
 532         b43_shm_control_word(dev, routing, offset);
 533         ret = b43_read16(dev, B43_MMIO_SHM_DATA);
 534 out:
 535         return ret;
 536 }
 537
 538 void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
 539 {
 540         if (routing == B43_SHM_SHARED) {
 541                 B43_WARN_ON(offset & 0x0001);
 542                 if (offset & 0x0003) {
 543                         /* Unaligned access */
 544                         b43_shm_control_word(dev, routing, offset >> 2);
 545                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED,
 546                                     value & 0xFFFF);
 547                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 548                         b43_write16(dev, B43_MMIO_SHM_DATA,
 549                                     (value >> 16) & 0xFFFF);
 550                         return;
 551                 }
 552                 offset >>= 2;
 553         }
 554         b43_shm_control_word(dev, routing, offset);
 555         b43_write32(dev, B43_MMIO_SHM_DATA, value);
 556 }
 557
 558 void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
 559 {
 560         if (routing == B43_SHM_SHARED) {
 561                 B43_WARN_ON(offset & 0x0001);
 562                 if (offset & 0x0003) {
 563                         /* Unaligned access */
 564                         b43_shm_control_word(dev, routing, offset >> 2);
 565                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value);
 566                         return;
 567                 }
 568                 offset >>= 2;
 569         }
 570         b43_shm_control_word(dev, routing, offset);
 571         b43_write16(dev, B43_MMIO_SHM_DATA, value);
 572 }
 573
 574 /* Read HostFlags */
 575 u64 b43_hf_read(struct b43_wldev *dev)
 576 {
 577         u64 ret;
 578
 579         ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF3);
 580         ret <<= 16;
 581         ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF2);
 582         ret <<= 16;
 583         ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF1);
 584
 585         return ret;
 586 }
 587
 588 /* Write HostFlags */
 589 void b43_hf_write(struct b43_wldev *dev, u64 value)
 590 {
 591         u16 lo, mi, hi;
 592
 593         lo = (value & 0x00000000FFFFULL);
 594         mi = (value & 0x0000FFFF0000ULL) >> 16;
 595         hi = (value & 0xFFFF00000000ULL) >> 32;
 596         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF1, lo);
 597         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF2, mi);
 598         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF3, hi);
 599 }
 600
 601 /* Read the firmware capabilities bitmask (Opensource firmware only) */
 602 static u16 b43_fwcapa_read(struct b43_wldev *dev)
 603 {
 604         B43_WARN_ON(!dev->fw.opensource);
 605         return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA);
 606 }
 607
 608 void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
 609 {
 610         u32 low, high;
 611
 612         B43_WARN_ON(dev->dev->core_rev < 3);
 613
 614         /* The hardware guarantees us an atomic read, if we
 615          * read the low register first. */
 616         low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW);
 617         high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);
 618
 619         *tsf = high;
 620         *tsf <<= 32;
 621         *tsf |= low;
 622 }
 623
 624 static void b43_time_lock(struct b43_wldev *dev)
 625 {
 626         b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_TBTTHOLD);
 627         /* Commit the write */
 628         b43_read32(dev, B43_MMIO_MACCTL);
 629 }
 630
 631 static void b43_time_unlock(struct b43_wldev *dev)
 632 {
 633         b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_TBTTHOLD, 0);
 634         /* Commit the write */
 635         b43_read32(dev, B43_MMIO_MACCTL);
 636 }
 637
 638 static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf)
 639 {
 640         u32 low, high;
 641
 642         B43_WARN_ON(dev->dev->core_rev < 3);
 643
 644         low = tsf;
 645         high = (tsf >> 32);
 646         /* The hardware guarantees us an atomic write, if we
 647          * write the low register first. */
 648         b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, low);
 649         mmiowb();
 650         b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, high);
 651         mmiowb();
 652 }
 653
 654 void b43_tsf_write(struct b43_wldev *dev, u64 tsf)
 655 {
 656         b43_time_lock(dev);
 657         b43_tsf_write_locked(dev, tsf);
 658         b43_time_unlock(dev);
 659 }
 660
 661 static
 662 void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 *mac)
 663 {
 664         static const u8 zero_addr[ETH_ALEN] = { 0 };
 665         u16 data;
 666
 667         if (!mac)
 668                 mac = zero_addr;
 669
 670         offset |= 0x0020;
 671         b43_write16(dev, B43_MMIO_MACFILTER_CONTROL, offset);
 672
 673         data = mac[0];
 674         data |= mac[1] << 8;
 675         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 676         data = mac[2];
 677         data |= mac[3] << 8;
 678         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 679         data = mac[4];
 680         data |= mac[5] << 8;
 681         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 682 }
 683
 684 static void b43_write_mac_bssid_templates(struct b43_wldev *dev)
 685 {
 686         const u8 *mac;
 687         const u8 *bssid;
 688         u8 mac_bssid[ETH_ALEN * 2];
 689         int i;
 690         u32 tmp;
 691
 692         bssid = dev->wl->bssid;
 693         mac = dev->wl->mac_addr;
 694
 695         b43_macfilter_set(dev, B43_MACFILTER_BSSID, bssid);
 696
 697         memcpy(mac_bssid, mac, ETH_ALEN);
 698         memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN);
 699
 700         /* Write our MAC address and BSSID to template ram */
 701         for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) {
 702                 tmp = (u32) (mac_bssid[i + 0]);
 703                 tmp |= (u32) (mac_bssid[i + 1]) << 8;
 704                 tmp |= (u32) (mac_bssid[i + 2]) << 16;
 705                 tmp |= (u32) (mac_bssid[i + 3]) << 24;
 706                 b43_ram_write(dev, 0x20 + i, tmp);
 707         }
 708 }
 709
 710 static void b43_upload_card_macaddress(struct b43_wldev *dev)
 711 {
 712         b43_write_mac_bssid_templates(dev);
 713         b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr);
 714 }
 715
 716 static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
 717 {
 718         /* slot_time is in usec. */
 719         /* This test used to exit for all but a G PHY. */
 720         if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
 721                 return;
 722         b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time);
 723         /* Shared memory location 0x0010 is the slot time and should be
 724          * set to slot_time; however, this register is initially 0 and changing
 725          * the value adversely affects the transmit rate for BCM4311
 726          * devices. Until this behavior is unterstood, delete this step
 727          *
 728          * b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
 729          */
 730 }
 731
 732 static void b43_short_slot_timing_enable(struct b43_wldev *dev)
 733 {
 734         b43_set_slot_time(dev, 9);
 735 }
 736
 737 static void b43_short_slot_timing_disable(struct b43_wldev *dev)
 738 {
 739         b43_set_slot_time(dev, 20);
 740 }
 741
 742 /* DummyTransmission function, as documented on
 743  * http://bcm-v4.sipsolutions.net/802.11/DummyTransmission
 744  */
 745 void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on)
 746 {
 747         struct b43_phy *phy = &dev->phy;
 748         unsigned int i, max_loop;
 749         u16 value;
 750         u32 buffer[5] = {
 751                 0x00000000,
 752                 0x00D40000,
 753                 0x00000000,
 754                 0x01000000,
 755                 0x00000000,
 756         };
 757
 758         if (ofdm) {
 759                 max_loop = 0x1E;
 760                 buffer[0] = 0x000201CC;
 761         } else {
 762                 max_loop = 0xFA;
 763                 buffer[0] = 0x000B846E;
 764         }
 765
 766         for (i = 0; i < 5; i++)
 767                 b43_ram_write(dev, i * 4, buffer[i]);
 768
 769         b43_write16(dev, B43_MMIO_XMTSEL, 0x0000);
 770
 771         if (dev->dev->core_rev < 11)
 772                 b43_write16(dev, B43_MMIO_WEPCTL, 0x0000);
 773         else
 774                 b43_write16(dev, B43_MMIO_WEPCTL, 0x0100);
 775
 776         value = (ofdm ? 0x41 : 0x40);
 777         b43_write16(dev, B43_MMIO_TXE0_PHYCTL, value);
 778         if (phy->type == B43_PHYTYPE_N || phy->type == B43_PHYTYPE_LP ||
 779             phy->type == B43_PHYTYPE_LCN)
 780                 b43_write16(dev, B43_MMIO_TXE0_PHYCTL1, 0x1A02);
 781
 782         b43_write16(dev, B43_MMIO_TXE0_WM_0, 0x0000);
 783         b43_write16(dev, B43_MMIO_TXE0_WM_1, 0x0000);
 784
 785         b43_write16(dev, B43_MMIO_XMTTPLATETXPTR, 0x0000);
 786         b43_write16(dev, B43_MMIO_XMTTXCNT, 0x0014);
 787         b43_write16(dev, B43_MMIO_XMTSEL, 0x0826);
 788         b43_write16(dev, B43_MMIO_TXE0_CTL, 0x0000);
 789
 790         if (!pa_on && phy->type == B43_PHYTYPE_N)
 791                 ; /*b43_nphy_pa_override(dev, false) */
 792
 793         switch (phy->type) {
 794         case B43_PHYTYPE_N:
 795         case B43_PHYTYPE_LCN:
 796                 b43_write16(dev, B43_MMIO_TXE0_AUX, 0x00D0);
 797                 break;
 798         case B43_PHYTYPE_LP:
 799                 b43_write16(dev, B43_MMIO_TXE0_AUX, 0x0050);
 800                 break;
 801         default:
 802                 b43_write16(dev, B43_MMIO_TXE0_AUX, 0x0030);
 803         }
 804         b43_read16(dev, B43_MMIO_TXE0_AUX);
 805
 806         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 807                 b43_radio_write16(dev, 0x0051, 0x0017);
 808         for (i = 0x00; i < max_loop; i++) {
 809                 value = b43_read16(dev, B43_MMIO_TXE0_STATUS);
 810                 if (value & 0x0080)
 811                         break;
 812                 udelay(10);
 813         }
 814         for (i = 0x00; i < 0x0A; i++) {
 815                 value = b43_read16(dev, B43_MMIO_TXE0_STATUS);
 816                 if (value & 0x0400)
 817                         break;
 818                 udelay(10);
 819         }
 820         for (i = 0x00; i < 0x19; i++) {
 821                 value = b43_read16(dev, B43_MMIO_IFSSTAT);
 822                 if (!(value & 0x0100))
 823                         break;
 824                 udelay(10);
 825         }
 826         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 827                 b43_radio_write16(dev, 0x0051, 0x0037);
 828 }
 829
 830 static void key_write(struct b43_wldev *dev,
 831                       u8 index, u8 algorithm, const u8 *key)
 832 {
 833         unsigned int i;
 834         u32 offset;
 835         u16 value;
 836         u16 kidx;
 837
 838         /* Key index/algo block */
 839         kidx = b43_kidx_to_fw(dev, index);
 840         value = ((kidx << 4) | algorithm);
 841         b43_shm_write16(dev, B43_SHM_SHARED,
 842                         B43_SHM_SH_KEYIDXBLOCK + (kidx * 2), value);
 843
 844         /* Write the key to the Key Table Pointer offset */
 845         offset = dev->ktp + (index * B43_SEC_KEYSIZE);
 846         for (i = 0; i < B43_SEC_KEYSIZE; i += 2) {
 847                 value = key[i];
 848                 value |= (u16) (key[i + 1]) << 8;
 849                 b43_shm_write16(dev, B43_SHM_SHARED, offset + i, value);
 850         }
 851 }
 852
 853 static void keymac_write(struct b43_wldev *dev, u8 index, const u8 *addr)
 854 {
 855         u32 addrtmp[2] = { 0, 0, };
 856         u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
 857
 858         if (b43_new_kidx_api(dev))
 859                 pairwise_keys_start = B43_NR_GROUP_KEYS;
 860
 861         B43_WARN_ON(index < pairwise_keys_start);
 862         /* We have four default TX keys and possibly four default RX keys.
 863          * Physical mac 0 is mapped to physical key 4 or 8, depending
 864          * on the firmware version.
 865          * So we must adjust the index here.
 866          */
 867         index -= pairwise_keys_start;
 868         B43_WARN_ON(index >= B43_NR_PAIRWISE_KEYS);
 869
 870         if (addr) {
 871                 addrtmp[0] = addr[0];
 872                 addrtmp[0] |= ((u32) (addr[1]) << 8);
 873                 addrtmp[0] |= ((u32) (addr[2]) << 16);
 874                 addrtmp[0] |= ((u32) (addr[3]) << 24);
 875                 addrtmp[1] = addr[4];
 876                 addrtmp[1] |= ((u32) (addr[5]) << 8);
 877         }
 878
 879         /* Receive match transmitter address (RCMTA) mechanism */
 880         b43_shm_write32(dev, B43_SHM_RCMTA,
 881                         (index * 2) + 0, addrtmp[0]);
 882         b43_shm_write16(dev, B43_SHM_RCMTA,
 883                         (index * 2) + 1, addrtmp[1]);
 884 }
 885
 886 /* The ucode will use phase1 key with TEK key to decrypt rx packets.
 887  * When a packet is received, the iv32 is checked.
 888  * - if it doesn't the packet is returned without modification (and software
 889  *   decryption can be done). That's what happen when iv16 wrap.
 890  * - if it does, the rc4 key is computed, and decryption is tried.
 891  *   Either it will success and B43_RX_MAC_DEC is returned,
 892  *   either it fails and B43_RX_MAC_DEC|B43_RX_MAC_DECERR is returned
 893  *   and the packet is not usable (it got modified by the ucode).
 894  * So in order to never have B43_RX_MAC_DECERR, we should provide
 895  * a iv32 and phase1key that match. Because we drop packets in case of
 896  * B43_RX_MAC_DECERR, if we have a correct iv32 but a wrong phase1key, all
 897  * packets will be lost without higher layer knowing (ie no resync possible
 898  * until next wrap).
 899  *
 900  * NOTE : this should support 50 key like RCMTA because
 901  * (B43_SHM_SH_KEYIDXBLOCK - B43_SHM_SH_TKIPTSCTTAK)/14 = 50
 902  */
 903 static void rx_tkip_phase1_write(struct b43_wldev *dev, u8 index, u32 iv32,
 904                 u16 *phase1key)
 905 {
 906         unsigned int i;
 907         u32 offset;
 908         u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
 909
 910         if (!modparam_hwtkip)
 911                 return;
 912
 913         if (b43_new_kidx_api(dev))
 914                 pairwise_keys_start = B43_NR_GROUP_KEYS;
 915
 916         B43_WARN_ON(index < pairwise_keys_start);
 917         /* We have four default TX keys and possibly four default RX keys.
 918          * Physical mac 0 is mapped to physical key 4 or 8, depending
 919          * on the firmware version.
 920          * So we must adjust the index here.
 921          */
 922         index -= pairwise_keys_start;
 923         B43_WARN_ON(index >= B43_NR_PAIRWISE_KEYS);
 924
 925         if (b43_debug(dev, B43_DBG_KEYS)) {
 926                 b43dbg(dev->wl, "rx_tkip_phase1_write : idx 0x%x, iv32 0x%x\n",
 927                                 index, iv32);
 928         }
 929         /* Write the key to the  RX tkip shared mem */
 930         offset = B43_SHM_SH_TKIPTSCTTAK + index * (10 + 4);
 931         for (i = 0; i < 10; i += 2) {
 932                 b43_shm_write16(dev, B43_SHM_SHARED, offset + i,
 933                                 phase1key ? phase1key[i / 2] : 0);
 934         }
 935         b43_shm_write16(dev, B43_SHM_SHARED, offset + i, iv32);
 936         b43_shm_write16(dev, B43_SHM_SHARED, offset + i + 2, iv32 >> 16);
 937 }
 938
 939 static void b43_op_update_tkip_key(struct ieee80211_hw *hw,
 940                                    struct ieee80211_vif *vif,
 941                                    struct ieee80211_key_conf *keyconf,
 942                                    struct ieee80211_sta *sta,
 943                                    u32 iv32, u16 *phase1key)
 944 {
 945         struct b43_wl *wl = hw_to_b43_wl(hw);
 946         struct b43_wldev *dev;
 947         int index = keyconf->hw_key_idx;
 948
 949         if (B43_WARN_ON(!modparam_hwtkip))
 950                 return;
 951
 952         /* This is only called from the RX path through mac80211, where
 953          * our mutex is already locked. */
 954         B43_WARN_ON(!mutex_is_locked(&wl->mutex));
 955         dev = wl->current_dev;
 956         B43_WARN_ON(!dev || b43_status(dev) < B43_STAT_INITIALIZED);
 957
 958         keymac_write(dev, index, NULL); /* First zero out mac to avoid race */
 959
 960         rx_tkip_phase1_write(dev, index, iv32, phase1key);
 961         /* only pairwise TKIP keys are supported right now */
 962         if (WARN_ON(!sta))
 963                 return;
 964         keymac_write(dev, index, sta->addr);
 965 }
 966
 967 static void do_key_write(struct b43_wldev *dev,
 968                          u8 index, u8 algorithm,
 969                          const u8 *key, size_t key_len, const u8 *mac_addr)
 970 {
 971         u8 buf[B43_SEC_KEYSIZE] = { 0, };
 972         u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
 973
 974         if (b43_new_kidx_api(dev))
 975                 pairwise_keys_start = B43_NR_GROUP_KEYS;
 976
 977         B43_WARN_ON(index >= ARRAY_SIZE(dev->key));
 978         B43_WARN_ON(key_len > B43_SEC_KEYSIZE);
 979
 980         if (index >= pairwise_keys_start)
 981                 keymac_write(dev, index, NULL); /* First zero out mac. */
 982         if (algorithm == B43_SEC_ALGO_TKIP) {
 983                 /*
 984                  * We should provide an initial iv32, phase1key pair.
 985                  * We could start with iv32=0 and compute the corresponding
 986                  * phase1key, but this means calling ieee80211_get_tkip_key
 987                  * with a fake skb (or export other tkip function).
 988                  * Because we are lazy we hope iv32 won't start with
 989                  * 0xffffffff and let's b43_op_update_tkip_key provide a
 990                  * correct pair.
 991                  */
 992                 rx_tkip_phase1_write(dev, index, 0xffffffff, (u16*)buf);
 993         } else if (index >= pairwise_keys_start) /* clear it */
 994                 rx_tkip_phase1_write(dev, index, 0, NULL);
 995         if (key)
 996                 memcpy(buf, key, key_len);
 997         key_write(dev, index, algorithm, buf);
 998         if (index >= pairwise_keys_start)
 999                 keymac_write(dev, index, mac_addr);
1000
1001         dev->key[index].algorithm = algorithm;
1002 }
1003
1004 static int b43_key_write(struct b43_wldev *dev,
1005                          int index, u8 algorithm,
1006                          const u8 *key, size_t key_len,
1007                          const u8 *mac_addr,
1008                          struct ieee80211_key_conf *keyconf)
1009 {
1010         int i;
1011         int pairwise_keys_start;
1012
1013         /* For ALG_TKIP the key is encoded as a 256-bit (32 byte) data block:
1014          *      - Temporal Encryption Key (128 bits)
1015          *      - Temporal Authenticator Tx MIC Key (64 bits)
1016          *      - Temporal Authenticator Rx MIC Key (64 bits)
1017          *
1018          *      Hardware only store TEK
1019          */
1020         if (algorithm == B43_SEC_ALGO_TKIP && key_len == 32)
1021                 key_len = 16;
1022         if (key_len > B43_SEC_KEYSIZE)
1023                 return -EINVAL;
1024         for (i = 0; i < ARRAY_SIZE(dev->key); i++) {
1025                 /* Check that we don't already have this key. */
1026                 B43_WARN_ON(dev->key[i].keyconf == keyconf);
1027         }
1028         if (index < 0) {
1029                 /* Pairwise key. Get an empty slot for the key. */
1030                 if (b43_new_kidx_api(dev))
1031                         pairwise_keys_start = B43_NR_GROUP_KEYS;
1032                 else
1033                         pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
1034                 for (i = pairwise_keys_start;
1035                      i < pairwise_keys_start + B43_NR_PAIRWISE_KEYS;
1036                      i++) {
1037                         B43_WARN_ON(i >= ARRAY_SIZE(dev->key));
1038                         if (!dev->key[i].keyconf) {
1039                                 /* found empty */
1040                                 index = i;
1041                                 break;
1042                         }
1043                 }
1044                 if (index < 0) {
1045                         b43warn(dev->wl, "Out of hardware key memory\n");
1046                         return -ENOSPC;
1047                 }
1048         } else
1049                 B43_WARN_ON(index > 3);
1050
1051         do_key_write(dev, index, algorithm, key, key_len, mac_addr);
1052         if ((index <= 3) && !b43_new_kidx_api(dev)) {
1053                 /* Default RX key */
1054                 B43_WARN_ON(mac_addr);
1055                 do_key_write(dev, index + 4, algorithm, key, key_len, NULL);
1056         }
1057         keyconf->hw_key_idx = index;
1058         dev->key[index].keyconf = keyconf;
1059
1060         return 0;
1061 }
1062
1063 static int b43_key_clear(struct b43_wldev *dev, int index)
1064 {
1065         if (B43_WARN_ON((index < 0) || (index >= ARRAY_SIZE(dev->key))))
1066                 return -EINVAL;
1067         do_key_write(dev, index, B43_SEC_ALGO_NONE,
1068                      NULL, B43_SEC_KEYSIZE, NULL);
1069         if ((index <= 3) && !b43_new_kidx_api(dev)) {
1070                 do_key_write(dev, index + 4, B43_SEC_ALGO_NONE,
1071                              NULL, B43_SEC_KEYSIZE, NULL);
1072         }
1073         dev->key[index].keyconf = NULL;
1074
1075         return 0;
1076 }
1077
1078 static void b43_clear_keys(struct b43_wldev *dev)
1079 {
1080         int i, count;
1081
1082         if (b43_new_kidx_api(dev))
1083                 count = B43_NR_GROUP_KEYS + B43_NR_PAIRWISE_KEYS;
1084         else
1085                 count = B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS;
1086         for (i = 0; i < count; i++)
1087                 b43_key_clear(dev, i);
1088 }
1089
1090 static void b43_dump_keymemory(struct b43_wldev *dev)
1091 {
1092         unsigned int i, index, count, offset, pairwise_keys_start;
1093         u8 mac[ETH_ALEN];
1094         u16 algo;
1095         u32 rcmta0;
1096         u16 rcmta1;
1097         u64 hf;
1098         struct b43_key *key;
1099
1100         if (!b43_debug(dev, B43_DBG_KEYS))
1101                 return;
1102
1103         hf = b43_hf_read(dev);
1104         b43dbg(dev->wl, "Hardware key memory dump:  USEDEFKEYS=%u\n",
1105                !!(hf & B43_HF_USEDEFKEYS));
1106         if (b43_new_kidx_api(dev)) {
1107                 pairwise_keys_start = B43_NR_GROUP_KEYS;
1108                 count = B43_NR_GROUP_KEYS + B43_NR_PAIRWISE_KEYS;
1109         } else {
1110                 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
1111                 count = B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS;
1112         }
1113         for (index = 0; index < count; index++) {
1114                 key = &(dev->key[index]);
1115                 printk(KERN_DEBUG "Key slot %02u: %s",
1116                        index, (key->keyconf == NULL) ? " " : "*");
1117                 offset = dev->ktp + (index * B43_SEC_KEYSIZE);
1118                 for (i = 0; i < B43_SEC_KEYSIZE; i += 2) {
1119                         u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i);
1120                         printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF));
1121                 }
1122
1123                 algo = b43_shm_read16(dev, B43_SHM_SHARED,
1124                                       B43_SHM_SH_KEYIDXBLOCK + (index * 2));
1125                 printk("   Algo: %04X/%02X", algo, key->algorithm);
1126
1127                 if (index >= pairwise_keys_start) {
1128                         if (key->algorithm == B43_SEC_ALGO_TKIP) {
1129                                 printk("   TKIP: ");
1130                                 offset = B43_SHM_SH_TKIPTSCTTAK + (index - 4) * (10 + 4);
1131                                 for (i = 0; i < 14; i += 2) {
1132                                         u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i);
1133                                         printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF));
1134                                 }
1135                         }
1136                         rcmta0 = b43_shm_read32(dev, B43_SHM_RCMTA,
1137                                                 ((index - pairwise_keys_start) * 2) + 0);
1138                         rcmta1 = b43_shm_read16(dev, B43_SHM_RCMTA,
1139                                                 ((index - pairwise_keys_start) * 2) + 1);
1140                         *((__le32 *)(&mac[0])) = cpu_to_le32(rcmta0);
1141                         *((__le16 *)(&mac[4])) = cpu_to_le16(rcmta1);
1142                         printk("   MAC: %pM", mac);
1143                 } else
1144                         printk("   DEFAULT KEY");
1145                 printk("\n");
1146         }
1147 }
1148
1149 void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
1150 {
1151         u32 macctl;
1152         u16 ucstat;
1153         bool hwps;
1154         bool awake;
1155         int i;
1156
1157         B43_WARN_ON((ps_flags & B43_PS_ENABLED) &&
1158                     (ps_flags & B43_PS_DISABLED));
1159         B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP));
1160
1161         if (ps_flags & B43_PS_ENABLED) {
1162                 hwps = true;
1163         } else if (ps_flags & B43_PS_DISABLED) {
1164                 hwps = false;
1165         } else {
1166                 //TODO: If powersave is not off and FIXME is not set and we are not in adhoc
1167                 //      and thus is not an AP and we are associated, set bit 25
1168         }
1169         if (ps_flags & B43_PS_AWAKE) {
1170                 awake = true;
1171         } else if (ps_flags & B43_PS_ASLEEP) {
1172                 awake = false;
1173         } else {
1174                 //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME,
1175                 //      or we are associated, or FIXME, or the latest PS-Poll packet sent was
1176                 //      successful, set bit26
1177         }
1178
1179 /* FIXME: For now we force awake-on and hwps-off */
1180         hwps = false;
1181         awake = true;
1182
1183         macctl = b43_read32(dev, B43_MMIO_MACCTL);
1184         if (hwps)
1185                 macctl |= B43_MACCTL_HWPS;
1186         else
1187                 macctl &= ~B43_MACCTL_HWPS;
1188         if (awake)
1189                 macctl |= B43_MACCTL_AWAKE;
1190         else
1191                 macctl &= ~B43_MACCTL_AWAKE;
1192         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1193         /* Commit write */
1194         b43_read32(dev, B43_MMIO_MACCTL);
1195         if (awake && dev->dev->core_rev >= 5) {
1196                 /* Wait for the microcode to wake up. */
1197                 for (i = 0; i < 100; i++) {
1198                         ucstat = b43_shm_read16(dev, B43_SHM_SHARED,
1199                                                 B43_SHM_SH_UCODESTAT);
1200                         if (ucstat != B43_SHM_SH_UCODESTAT_SLEEP)
1201                                 break;
1202                         udelay(10);
1203                 }
1204         }
1205 }
1206
1207 /* http://bcm-v4.sipsolutions.net/802.11/PHY/BmacCorePllReset */
1208 void b43_wireless_core_phy_pll_reset(struct b43_wldev *dev)
1209 {
1210         struct bcma_drv_cc *bcma_cc __maybe_unused;
1211         struct ssb_chipcommon *ssb_cc __maybe_unused;
1212
1213         switch (dev->dev->bus_type) {
1214 #ifdef CONFIG_B43_BCMA
1215         case B43_BUS_BCMA:
1216                 bcma_cc = &dev->dev->bdev->bus->drv_cc;
1217
1218                 bcma_cc_write32(bcma_cc, BCMA_CC_CHIPCTL_ADDR, 0);
1219                 bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4);
1220                 bcma_cc_set32(bcma_cc, BCMA_CC_CHIPCTL_DATA, 0x4);
1221                 bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4);
1222                 break;
1223 #endif
1224 #ifdef CONFIG_B43_SSB
1225         case B43_BUS_SSB:
1226                 ssb_cc = &dev->dev->sdev->bus->chipco;
1227
1228                 chipco_write32(ssb_cc, SSB_CHIPCO_CHIPCTL_ADDR, 0);
1229                 chipco_mask32(ssb_cc, SSB_CHIPCO_CHIPCTL_DATA, ~0x4);
1230                 chipco_set32(ssb_cc, SSB_CHIPCO_CHIPCTL_DATA, 0x4);
1231                 chipco_mask32(ssb_cc, SSB_CHIPCO_CHIPCTL_DATA, ~0x4);
1232                 break;
1233 #endif
1234         }
1235 }
1236
1237 #ifdef CONFIG_B43_BCMA
1238 static void b43_bcma_phy_reset(struct b43_wldev *dev)
1239 {
1240         u32 flags;
1241
1242         /* Put PHY into reset */
1243         flags = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
1244         flags |= B43_BCMA_IOCTL_PHY_RESET;
1245         flags |= B43_BCMA_IOCTL_PHY_BW_20MHZ; /* Make 20 MHz def */
1246         bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, flags);
1247         udelay(2);
1248
1249         b43_phy_take_out_of_reset(dev);
1250 }
1251
1252 static void b43_bcma_wireless_core_reset(struct b43_wldev *dev, bool gmode)
1253 {
1254         u32 req = B43_BCMA_CLKCTLST_80211_PLL_REQ |
1255                   B43_BCMA_CLKCTLST_PHY_PLL_REQ;
1256         u32 status = B43_BCMA_CLKCTLST_80211_PLL_ST |
1257                      B43_BCMA_CLKCTLST_PHY_PLL_ST;
1258         u32 flags;
1259
1260         flags = B43_BCMA_IOCTL_PHY_CLKEN;
1261         if (gmode)
1262                 flags |= B43_BCMA_IOCTL_GMODE;
1263         b43_device_enable(dev, flags);
1264
1265         bcma_core_set_clockmode(dev->dev->bdev, BCMA_CLKMODE_FAST);
1266         b43_bcma_phy_reset(dev);
1267         bcma_core_pll_ctl(dev->dev->bdev, req, status, true);
1268 }
1269 #endif
1270
1271 #ifdef CONFIG_B43_SSB
1272 static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, bool gmode)
1273 {
1274         u32 flags = 0;
1275
1276         if (gmode)
1277                 flags |= B43_TMSLOW_GMODE;
1278         flags |= B43_TMSLOW_PHYCLKEN;
1279         flags |= B43_TMSLOW_PHYRESET;
1280         if (dev->phy.type == B43_PHYTYPE_N)
1281                 flags |= B43_TMSLOW_PHY_BANDWIDTH_20MHZ; /* Make 20 MHz def */
1282         b43_device_enable(dev, flags);
1283         msleep(2);              /* Wait for the PLL to turn on. */
1284
1285         b43_phy_take_out_of_reset(dev);
1286 }
1287 #endif
1288
1289 void b43_wireless_core_reset(struct b43_wldev *dev, bool gmode)
1290 {
1291         u32 macctl;
1292
1293         switch (dev->dev->bus_type) {
1294 #ifdef CONFIG_B43_BCMA
1295         case B43_BUS_BCMA:
1296                 b43_bcma_wireless_core_reset(dev, gmode);
1297                 break;
1298 #endif
1299 #ifdef CONFIG_B43_SSB
1300         case B43_BUS_SSB:
1301                 b43_ssb_wireless_core_reset(dev, gmode);
1302                 break;
1303 #endif
1304         }
1305
1306         /* Turn Analog ON, but only if we already know the PHY-type.
1307          * This protects against very early setup where we don't know the
1308          * PHY-type, yet. wireless_core_reset will be called once again later,
1309          * when we know the PHY-type. */
1310         if (dev->phy.ops)
1311                 dev->phy.ops->switch_analog(dev, 1);
1312
1313         macctl = b43_read32(dev, B43_MMIO_MACCTL);
1314         macctl &= ~B43_MACCTL_GMODE;
1315         if (gmode)
1316                 macctl |= B43_MACCTL_GMODE;
1317         macctl |= B43_MACCTL_IHR_ENABLED;
1318         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1319 }
1320
1321 static void handle_irq_transmit_status(struct b43_wldev *dev)
1322 {
1323         u32 v0, v1;
1324         u16 tmp;
1325         struct b43_txstatus stat;
1326
1327         while (1) {
1328                 v0 = b43_read32(dev, B43_MMIO_XMITSTAT_0);
1329                 if (!(v0 & 0x00000001))
1330                         break;
1331                 v1 = b43_read32(dev, B43_MMIO_XMITSTAT_1);
1332
1333                 stat.cookie = (v0 >> 16);
1334                 stat.seq = (v1 & 0x0000FFFF);
1335                 stat.phy_stat = ((v1 & 0x00FF0000) >> 16);
1336                 tmp = (v0 & 0x0000FFFF);
1337                 stat.frame_count = ((tmp & 0xF000) >> 12);
1338                 stat.rts_count = ((tmp & 0x0F00) >> 8);
1339                 stat.supp_reason = ((tmp & 0x001C) >> 2);
1340                 stat.pm_indicated = !!(tmp & 0x0080);
1341                 stat.intermediate = !!(tmp & 0x0040);
1342                 stat.for_ampdu = !!(tmp & 0x0020);
1343                 stat.acked = !!(tmp & 0x0002);
1344
1345                 b43_handle_txstatus(dev, &stat);
1346         }
1347 }
1348
1349 static void drain_txstatus_queue(struct b43_wldev *dev)
1350 {
1351         u32 dummy;
1352
1353         if (dev->dev->core_rev < 5)
1354                 return;
1355         /* Read all entries from the microcode TXstatus FIFO
1356          * and throw them away.
1357          */
1358         while (1) {
1359                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_0);
1360                 if (!(dummy & 0x00000001))
1361                         break;
1362                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_1);
1363         }
1364 }
1365
1366 static u32 b43_jssi_read(struct b43_wldev *dev)
1367 {
1368         u32 val = 0;
1369
1370         val = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_JSSI1);
1371         val <<= 16;
1372         val |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_JSSI0);
1373
1374         return val;
1375 }
1376
1377 static void b43_jssi_write(struct b43_wldev *dev, u32 jssi)
1378 {
1379         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_JSSI0,
1380                         (jssi & 0x0000FFFF));
1381         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_JSSI1,
1382                         (jssi & 0xFFFF0000) >> 16);
1383 }
1384
1385 static void b43_generate_noise_sample(struct b43_wldev *dev)
1386 {
1387         b43_jssi_write(dev, 0x7F7F7F7F);
1388         b43_write32(dev, B43_MMIO_MACCMD,
1389                     b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
1390 }
1391
1392 static void b43_calculate_link_quality(struct b43_wldev *dev)
1393 {
1394         /* Top half of Link Quality calculation. */
1395
1396         if (dev->phy.type != B43_PHYTYPE_G)
1397                 return;
1398         if (dev->noisecalc.calculation_running)
1399                 return;
1400         dev->noisecalc.calculation_running = true;
1401         dev->noisecalc.nr_samples = 0;
1402
1403         b43_generate_noise_sample(dev);
1404 }
1405
1406 static void handle_irq_noise(struct b43_wldev *dev)
1407 {
1408         struct b43_phy_g *phy = dev->phy.g;
1409         u16 tmp;
1410         u8 noise[4];
1411         u8 i, j;
1412         s32 average;
1413
1414         /* Bottom half of Link Quality calculation. */
1415
1416         if (dev->phy.type != B43_PHYTYPE_G)
1417                 return;
1418
1419         /* Possible race condition: It might be possible that the user
1420          * changed to a different channel in the meantime since we
1421          * started the calculation. We ignore that fact, since it's
1422          * not really that much of a problem. The background noise is
1423          * an estimation only anyway. Slightly wrong results will get damped
1424          * by the averaging of the 8 sample rounds. Additionally the
1425          * value is shortlived. So it will be replaced by the next noise
1426          * calculation round soon. */
1427
1428         B43_WARN_ON(!dev->noisecalc.calculation_running);
1429         *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
1430         if (noise[0] == 0x7F || noise[1] == 0x7F ||
1431             noise[2] == 0x7F || noise[3] == 0x7F)
1432                 goto generate_new;
1433
1434         /* Get the noise samples. */
1435         B43_WARN_ON(dev->noisecalc.nr_samples >= 8);
1436         i = dev->noisecalc.nr_samples;
1437         noise[0] = clamp_val(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1438         noise[1] = clamp_val(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1439         noise[2] = clamp_val(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1440         noise[3] = clamp_val(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1441         dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]];
1442         dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]];
1443         dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]];
1444         dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]];
1445         dev->noisecalc.nr_samples++;
1446         if (dev->noisecalc.nr_samples == 8) {
1447                 /* Calculate the Link Quality by the noise samples. */
1448                 average = 0;
1449                 for (i = 0; i < 8; i++) {
1450                         for (j = 0; j < 4; j++)
1451                                 average += dev->noisecalc.samples[i][j];
1452                 }
1453                 average /= (8 * 4);
1454                 average *= 125;
1455                 average += 64;
1456                 average /= 128;
1457                 tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x40C);
1458                 tmp = (tmp / 128) & 0x1F;
1459                 if (tmp >= 8)
1460                         average += 2;
1461                 else
1462                         average -= 25;
1463                 if (tmp == 8)
1464                         average -= 72;
1465                 else
1466                         average -= 48;
1467
1468                 dev->stats.link_noise = average;
1469                 dev->noisecalc.calculation_running = false;
1470                 return;
1471         }
1472 generate_new:
1473         b43_generate_noise_sample(dev);
1474 }
1475
1476 static void handle_irq_tbtt_indication(struct b43_wldev *dev)
1477 {
1478         if (b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) {
1479                 ///TODO: PS TBTT
1480         } else {
1481                 if (1 /*FIXME: the last PSpoll frame was sent successfully */ )
1482                         b43_power_saving_ctl_bits(dev, 0);
1483         }
1484         if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC))
1485                 dev->dfq_valid = true;
1486 }
1487
1488 static void handle_irq_atim_end(struct b43_wldev *dev)
1489 {
1490         if (dev->dfq_valid) {
1491                 b43_write32(dev, B43_MMIO_MACCMD,
1492                             b43_read32(dev, B43_MMIO_MACCMD)
1493                             | B43_MACCMD_DFQ_VALID);
1494                 dev->dfq_valid = false;
1495         }
1496 }
1497
1498 static void handle_irq_pmq(struct b43_wldev *dev)
1499 {
1500         u32 tmp;
1501
1502         //TODO: AP mode.
1503
1504         while (1) {
1505                 tmp = b43_read32(dev, B43_MMIO_PS_STATUS);
1506                 if (!(tmp & 0x00000008))
1507                         break;
1508         }
1509         /* 16bit write is odd, but correct. */
1510         b43_write16(dev, B43_MMIO_PS_STATUS, 0x0002);
1511 }
1512
1513 static void b43_write_template_common(struct b43_wldev *dev,
1514                                       const u8 *data, u16 size,
1515                                       u16 ram_offset,
1516                                       u16 shm_size_offset, u8 rate)
1517 {
1518         u32 i, tmp;
1519         struct b43_plcp_hdr4 plcp;
1520
1521         plcp.data = 0;
1522         b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
1523         b43_ram_write(dev, ram_offset, le32_to_cpu(plcp.data));
1524         ram_offset += sizeof(u32);
1525         /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet.
1526          * So leave the first two bytes of the next write blank.
1527          */
1528         tmp = (u32) (data[0]) << 16;
1529         tmp |= (u32) (data[1]) << 24;
1530         b43_ram_write(dev, ram_offset, tmp);
1531         ram_offset += sizeof(u32);
1532         for (i = 2; i < size; i += sizeof(u32)) {
1533                 tmp = (u32) (data[i + 0]);
1534                 if (i + 1 < size)
1535                         tmp |= (u32) (data[i + 1]) << 8;
1536                 if (i + 2 < size)
1537                         tmp |= (u32) (data[i + 2]) << 16;
1538                 if (i + 3 < size)
1539                         tmp |= (u32) (data[i + 3]) << 24;
1540                 b43_ram_write(dev, ram_offset + i - 2, tmp);
1541         }
1542         b43_shm_write16(dev, B43_SHM_SHARED, shm_size_offset,
1543                         size + sizeof(struct b43_plcp_hdr6));
1544 }
1545
1546 /* Check if the use of the antenna that ieee80211 told us to
1547  * use is possible. This will fall back to DEFAULT.
1548  * "antenna_nr" is the antenna identifier we got from ieee80211. */
1549 u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
1550                                   u8 antenna_nr)
1551 {
1552         u8 antenna_mask;
1553
1554         if (antenna_nr == 0) {
1555                 /* Zero means "use default antenna". That's always OK. */
1556                 return 0;
1557         }
1558
1559         /* Get the mask of available antennas. */
1560         if (dev->phy.gmode)
1561                 antenna_mask = dev->dev->bus_sprom->ant_available_bg;
1562         else
1563                 antenna_mask = dev->dev->bus_sprom->ant_available_a;
1564
1565         if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
1566                 /* This antenna is not available. Fall back to default. */
1567                 return 0;
1568         }
1569
1570         return antenna_nr;
1571 }
1572
1573 /* Convert a b43 antenna number value to the PHY TX control value. */
1574 static u16 b43_antenna_to_phyctl(int antenna)
1575 {
1576         switch (antenna) {
1577         case B43_ANTENNA0:
1578                 return B43_TXH_PHY_ANT0;
1579         case B43_ANTENNA1:
1580                 return B43_TXH_PHY_ANT1;
1581         case B43_ANTENNA2:
1582                 return B43_TXH_PHY_ANT2;
1583         case B43_ANTENNA3:
1584                 return B43_TXH_PHY_ANT3;
1585         case B43_ANTENNA_AUTO0:
1586         case B43_ANTENNA_AUTO1:
1587                 return B43_TXH_PHY_ANT01AUTO;
1588         }
1589         B43_WARN_ON(1);
1590         return 0;
1591 }
1592
1593 static void b43_write_beacon_template(struct b43_wldev *dev,
1594                                       u16 ram_offset,
1595                                       u16 shm_size_offset)
1596 {
1597         unsigned int i, len, variable_len;
1598         const struct ieee80211_mgmt *bcn;
1599         const u8 *ie;
1600         bool tim_found = false;
1601         unsigned int rate;
1602         u16 ctl;
1603         int antenna;
1604         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);
1605
1606         bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
1607         len = min_t(size_t, dev->wl->current_beacon->len,
1608                   0x200 - sizeof(struct b43_plcp_hdr6));
1609         rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;
1610
1611         b43_write_template_common(dev, (const u8 *)bcn,
1612                                   len, ram_offset, shm_size_offset, rate);
1613
1614         /* Write the PHY TX control parameters. */
1615         antenna = B43_ANTENNA_DEFAULT;
1616         antenna = b43_antenna_to_phyctl(antenna);
1617         ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
1618         /* We can't send beacons with short preamble. Would get PHY errors. */
1619         ctl &= ~B43_TXH_PHY_SHORTPRMBL;
1620         ctl &= ~B43_TXH_PHY_ANT;
1621         ctl &= ~B43_TXH_PHY_ENC;
1622         ctl |= antenna;
1623         if (b43_is_cck_rate(rate))
1624                 ctl |= B43_TXH_PHY_ENC_CCK;
1625         else
1626                 ctl |= B43_TXH_PHY_ENC_OFDM;
1627         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl);
1628
1629         /* Find the position of the TIM and the DTIM_period value
1630          * and write them to SHM. */
1631         ie = bcn->u.beacon.variable;
1632         variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable);
1633         for (i = 0; i < variable_len - 2; ) {
1634                 uint8_t ie_id, ie_len;
1635
1636                 ie_id = ie[i];
1637                 ie_len = ie[i + 1];
1638                 if (ie_id == 5) {
1639                         u16 tim_position;
1640                         u16 dtim_period;
1641                         /* This is the TIM Information Element */
1642
1643                         /* Check whether the ie_len is in the beacon data range. */
1644                         if (variable_len < ie_len + 2 + i)
1645                                 break;
1646                         /* A valid TIM is at least 4 bytes long. */
1647                         if (ie_len < 4)
1648                                 break;
1649                         tim_found = true;
1650
1651                         tim_position = sizeof(struct b43_plcp_hdr6);
1652                         tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable);
1653                         tim_position += i;
1654
1655                         dtim_period = ie[i + 3];
1656
1657                         b43_shm_write16(dev, B43_SHM_SHARED,
1658                                         B43_SHM_SH_TIMBPOS, tim_position);
1659                         b43_shm_write16(dev, B43_SHM_SHARED,
1660                                         B43_SHM_SH_DTIMPER, dtim_period);
1661                         break;
1662                 }
1663                 i += ie_len + 2;
1664         }
1665         if (!tim_found) {
1666                 /*
1667                  * If ucode wants to modify TIM do it behind the beacon, this
1668                  * will happen, for example, when doing mesh networking.
1669                  */
1670                 b43_shm_write16(dev, B43_SHM_SHARED,
1671                                 B43_SHM_SH_TIMBPOS,
1672                                 len + sizeof(struct b43_plcp_hdr6));
1673                 b43_shm_write16(dev, B43_SHM_SHARED,
1674                                 B43_SHM_SH_DTIMPER, 0);
1675         }
1676         b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset);
1677 }
1678
1679 static void b43_upload_beacon0(struct b43_wldev *dev)
1680 {
1681         struct b43_wl *wl = dev->wl;
1682
1683         if (wl->beacon0_uploaded)
1684                 return;
1685         b43_write_beacon_template(dev, B43_SHM_SH_BT_BASE0, B43_SHM_SH_BTL0);
1686         wl->beacon0_uploaded = true;
1687 }
1688
1689 static void b43_upload_beacon1(struct b43_wldev *dev)
1690 {
1691         struct b43_wl *wl = dev->wl;
1692
1693         if (wl->beacon1_uploaded)
1694                 return;
1695         b43_write_beacon_template(dev, B43_SHM_SH_BT_BASE1, B43_SHM_SH_BTL1);
1696         wl->beacon1_uploaded = true;
1697 }
1698
1699 static void handle_irq_beacon(struct b43_wldev *dev)
1700 {
1701         struct b43_wl *wl = dev->wl;
1702         u32 cmd, beacon0_valid, beacon1_valid;
1703
1704         if (!b43_is_mode(wl, NL80211_IFTYPE_AP) &&
1705             !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) &&
1706             !b43_is_mode(wl, NL80211_IFTYPE_ADHOC))
1707                 return;
1708
1709         /* This is the bottom half of the asynchronous beacon update. */
1710
1711         /* Ignore interrupt in the future. */
1712         dev->irq_mask &= ~B43_IRQ_BEACON;
1713
1714         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1715         beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID);
1716         beacon1_valid = (cmd & B43_MACCMD_BEACON1_VALID);
1717
1718         /* Schedule interrupt manually, if busy. */
1719         if (beacon0_valid && beacon1_valid) {
1720                 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON);
1721                 dev->irq_mask |= B43_IRQ_BEACON;
1722                 return;
1723         }
1724
1725         if (unlikely(wl->beacon_templates_virgin)) {
1726                 /* We never uploaded a beacon before.
1727                  * Upload both templates now, but only mark one valid. */
1728                 wl->beacon_templates_virgin = false;
1729                 b43_upload_beacon0(dev);
1730                 b43_upload_beacon1(dev);
1731                 cmd = b43_read32(dev, B43_MMIO_MACCMD);
1732                 cmd |= B43_MACCMD_BEACON0_VALID;
1733                 b43_write32(dev, B43_MMIO_MACCMD, cmd);
1734         } else {
1735                 if (!beacon0_valid) {
1736                         b43_upload_beacon0(dev);
1737                         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1738                         cmd |= B43_MACCMD_BEACON0_VALID;
1739                         b43_write32(dev, B43_MMIO_MACCMD, cmd);
1740                 } else if (!beacon1_valid) {
1741                         b43_upload_beacon1(dev);
1742                         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1743                         cmd |= B43_MACCMD_BEACON1_VALID;
1744                         b43_write32(dev, B43_MMIO_MACCMD, cmd);
1745                 }
1746         }
1747 }
1748
1749 static void b43_do_beacon_update_trigger_work(struct b43_wldev *dev)
1750 {
1751         u32 old_irq_mask = dev->irq_mask;
1752
1753         /* update beacon right away or defer to irq */
1754         handle_irq_beacon(dev);
1755         if (old_irq_mask != dev->irq_mask) {
1756                 /* The handler updated the IRQ mask. */
1757                 B43_WARN_ON(!dev->irq_mask);
1758                 if (b43_read32(dev, B43_MMIO_GEN_IRQ_MASK)) {
1759                         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
1760                 } else {
1761                         /* Device interrupts are currently disabled. That means
1762                          * we just ran the hardirq handler and scheduled the
1763                          * IRQ thread. The thread will write the IRQ mask when
1764                          * it finished, so there's nothing to do here. Writing
1765                          * the mask _here_ would incorrectly re-enable IRQs. */
1766                 }
1767         }
1768 }
1769
1770 static void b43_beacon_update_trigger_work(struct work_struct *work)
1771 {
1772         struct b43_wl *wl = container_of(work, struct b43_wl,
1773                                          beacon_update_trigger);
1774         struct b43_wldev *dev;
1775
1776         mutex_lock(&wl->mutex);
1777         dev = wl->current_dev;
1778         if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
1779                 if (b43_bus_host_is_sdio(dev->dev)) {
1780                         /* wl->mutex is enough. */
1781                         b43_do_beacon_update_trigger_work(dev);
1782                         mmiowb();
1783                 } else {
1784                         spin_lock_irq(&wl->hardirq_lock);
1785                         b43_do_beacon_update_trigger_work(dev);
1786                         mmiowb();
1787                         spin_unlock_irq(&wl->hardirq_lock);
1788                 }
1789         }
1790         mutex_unlock(&wl->mutex);
1791 }
1792
1793 /* Asynchronously update the packet templates in template RAM.
1794  * Locking: Requires wl->mutex to be locked. */
1795 static void b43_update_templates(struct b43_wl *wl)
1796 {
1797         struct sk_buff *beacon;
1798
1799         /* This is the top half of the ansynchronous beacon update.
1800          * The bottom half is the beacon IRQ.
1801          * Beacon update must be asynchronous to avoid sending an
1802          * invalid beacon. This can happen for example, if the firmware
1803          * transmits a beacon while we are updating it. */
1804
1805         /* We could modify the existing beacon and set the aid bit in
1806          * the TIM field, but that would probably require resizing and
1807          * moving of data within the beacon template.
1808          * Simply request a new beacon and let mac80211 do the hard work. */
1809         beacon = ieee80211_beacon_get(wl->hw, wl->vif);
1810         if (unlikely(!beacon))
1811                 return;
1812
1813         if (wl->current_beacon)
1814                 dev_kfree_skb_any(wl->current_beacon);
1815         wl->current_beacon = beacon;
1816         wl->beacon0_uploaded = false;
1817         wl->beacon1_uploaded = false;
1818         ieee80211_queue_work(wl->hw, &wl->beacon_update_trigger);
1819 }
1820
1821 static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
1822 {
1823         b43_time_lock(dev);
1824         if (dev->dev->core_rev >= 3) {
1825                 b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16));
1826                 b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10));
1827         } else {
1828                 b43_write16(dev, 0x606, (beacon_int >> 6));
1829                 b43_write16(dev, 0x610, beacon_int);
1830         }
1831         b43_time_unlock(dev);
1832         b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
1833 }
1834
1835 static void b43_handle_firmware_panic(struct b43_wldev *dev)
1836 {
1837         u16 reason;
1838
1839         /* Read the register that contains the reason code for the panic. */
1840         reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_FWPANIC_REASON_REG);
1841         b43err(dev->wl, "Whoopsy, firmware panic! Reason: %u\n", reason);
1842
1843         switch (reason) {
1844         default:
1845                 b43dbg(dev->wl, "The panic reason is unknown.\n");
1846                 /* fallthrough */
1847         case B43_FWPANIC_DIE:
1848                 /* Do not restart the controller or firmware.
1849                  * The device is nonfunctional from now on.
1850                  * Restarting would result in this panic to trigger again,
1851                  * so we avoid that recursion. */
1852                 break;
1853         case B43_FWPANIC_RESTART:
1854                 b43_controller_restart(dev, "Microcode panic");
1855                 break;
1856         }
1857 }
1858
1859 static void handle_irq_ucode_debug(struct b43_wldev *dev)
1860 {
1861         unsigned int i, cnt;
1862         u16 reason, marker_id, marker_line;
1863         __le16 *buf;
1864
1865         /* The proprietary firmware doesn't have this IRQ. */
1866         if (!dev->fw.opensource)
1867                 return;
1868
1869         /* Read the register that contains the reason code for this IRQ. */
1870         reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_DEBUGIRQ_REASON_REG);
1871
1872         switch (reason) {
1873         case B43_DEBUGIRQ_PANIC:
1874                 b43_handle_firmware_panic(dev);
1875                 break;
1876         case B43_DEBUGIRQ_DUMP_SHM:
1877                 if (!B43_DEBUG)
1878                         break; /* Only with driver debugging enabled. */
1879                 buf = kmalloc(4096, GFP_ATOMIC);
1880                 if (!buf) {
1881                         b43dbg(dev->wl, "SHM-dump: Failed to allocate memory\n");
1882                         goto out;
1883                 }
1884                 for (i = 0; i < 4096; i += 2) {
1885                         u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, i);
1886                         buf[i / 2] = cpu_to_le16(tmp);
1887                 }
1888                 b43info(dev->wl, "Shared memory dump:\n");
1889                 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET,
1890                                16, 2, buf, 4096, 1);
1891                 kfree(buf);
1892                 break;
1893         case B43_DEBUGIRQ_DUMP_REGS:
1894                 if (!B43_DEBUG)
1895                         break; /* Only with driver debugging enabled. */
1896                 b43info(dev->wl, "Microcode register dump:\n");
1897                 for (i = 0, cnt = 0; i < 64; i++) {
1898                         u16 tmp = b43_shm_read16(dev, B43_SHM_SCRATCH, i);
1899                         if (cnt == 0)
1900                                 printk(KERN_INFO);
1901                         printk("r%02u: 0x%04X  ", i, tmp);
1902                         cnt++;
1903                         if (cnt == 6) {
1904                                 printk("\n");
1905                                 cnt = 0;
1906                         }
1907                 }
1908                 printk("\n");
1909                 break;
1910         case B43_DEBUGIRQ_MARKER:
1911                 if (!B43_DEBUG)
1912                         break; /* Only with driver debugging enabled. */
1913                 marker_id = b43_shm_read16(dev, B43_SHM_SCRATCH,
1914                                            B43_MARKER_ID_REG);
1915                 marker_line = b43_shm_read16(dev, B43_SHM_SCRATCH,
1916                                              B43_MARKER_LINE_REG);
1917                 b43info(dev->wl, "The firmware just executed the MARKER(%u) "
1918                         "at line number %u\n",
1919                         marker_id, marker_line);
1920                 break;
1921         default:
1922                 b43dbg(dev->wl, "Debug-IRQ triggered for unknown reason: %u\n",
1923                        reason);
1924         }
1925 out:
1926         /* Acknowledge the debug-IRQ, so the firmware can continue. */
1927         b43_shm_write16(dev, B43_SHM_SCRATCH,
1928                         B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK);
1929 }
1930
1931 static void b43_do_interrupt_thread(struct b43_wldev *dev)
1932 {
1933         u32 reason;
1934         u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
1935         u32 merged_dma_reason = 0;
1936         int i;
1937
1938         if (unlikely(b43_status(dev) != B43_STAT_STARTED))
1939                 return;
1940
1941         reason = dev->irq_reason;
1942         for (i = 0; i < ARRAY_SIZE(dma_reason); i++) {
1943                 dma_reason[i] = dev->dma_reason[i];
1944                 merged_dma_reason |= dma_reason[i];
1945         }
1946
1947         if (unlikely(reason & B43_IRQ_MAC_TXERR))
1948                 b43err(dev->wl, "MAC transmission error\n");
1949
1950         if (unlikely(reason & B43_IRQ_PHY_TXERR)) {
1951                 b43err(dev->wl, "PHY transmission error\n");
1952                 rmb();
1953                 if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) {
1954                         atomic_set(&dev->phy.txerr_cnt,
1955                                    B43_PHY_TX_BADNESS_LIMIT);
1956                         b43err(dev->wl, "Too many PHY TX errors, "
1957                                         "restarting the controller\n");
1958                         b43_controller_restart(dev, "PHY TX errors");
1959                 }
1960         }
1961
1962         if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK))) {
1963                 b43err(dev->wl,
1964                         "Fatal DMA error: 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X\n",
1965                         dma_reason[0], dma_reason[1],
1966                         dma_reason[2], dma_reason[3],
1967                         dma_reason[4], dma_reason[5]);
1968                 b43err(dev->wl, "This device does not support DMA "
1969                                "on your system. It will now be switched to PIO.\n");
1970                 /* Fall back to PIO transfers if we get fatal DMA errors! */
1971                 dev->use_pio = true;
1972                 b43_controller_restart(dev, "DMA error");
1973                 return;
1974         }
1975
1976         if (unlikely(reason & B43_IRQ_UCODE_DEBUG))
1977                 handle_irq_ucode_debug(dev);
1978         if (reason & B43_IRQ_TBTT_INDI)
1979                 handle_irq_tbtt_indication(dev);
1980         if (reason & B43_IRQ_ATIM_END)
1981                 handle_irq_atim_end(dev);
1982         if (reason & B43_IRQ_BEACON)
1983                 handle_irq_beacon(dev);
1984         if (reason & B43_IRQ_PMQ)
1985                 handle_irq_pmq(dev);
1986         if (reason & B43_IRQ_TXFIFO_FLUSH_OK)
1987                 ;/* TODO */
1988         if (reason & B43_IRQ_NOISESAMPLE_OK)
1989                 handle_irq_noise(dev);
1990
1991         /* Check the DMA reason registers for received data. */
1992         if (dma_reason[0] & B43_DMAIRQ_RDESC_UFLOW) {
1993                 if (B43_DEBUG)
1994                         b43warn(dev->wl, "RX descriptor underrun\n");
1995                 b43_dma_handle_rx_overflow(dev->dma.rx_ring);
1996         }
1997         if (dma_reason[0] & B43_DMAIRQ_RX_DONE) {
1998                 if (b43_using_pio_transfers(dev))
1999                         b43_pio_rx(dev->pio.rx_queue);
2000                 else
2001                         b43_dma_rx(dev->dma.rx_ring);
2002         }
2003         B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE);
2004         B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE);
2005         B43_WARN_ON(dma_reason[3] & B43_DMAIRQ_RX_DONE);
2006         B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE);
2007         B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE);
2008
2009         if (reason & B43_IRQ_TX_OK)
2010                 handle_irq_transmit_status(dev);
2011
2012         /* Re-enable interrupts on the device by restoring the current interrupt mask. */
2013         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
2014
2015 #if B43_DEBUG
2016         if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
2017                 dev->irq_count++;
2018                 for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
2019                         if (reason & (1 << i))
2020                                 dev->irq_bit_count[i]++;
2021                 }
2022         }
2023 #endif
2024 }
2025
2026 /* Interrupt thread handler. Handles device interrupts in thread context. */
2027 static irqreturn_t b43_interrupt_thread_handler(int irq, void *dev_id)
2028 {
2029         struct b43_wldev *dev = dev_id;
2030
2031         mutex_lock(&dev->wl->mutex);
2032         b43_do_interrupt_thread(dev);
2033         mmiowb();
2034         mutex_unlock(&dev->wl->mutex);
2035
2036         return IRQ_HANDLED;
2037 }
2038
2039 static irqreturn_t b43_do_interrupt(struct b43_wldev *dev)
2040 {
2041         u32 reason;
2042
2043         /* This code runs under wl->hardirq_lock, but _only_ on non-SDIO busses.
2044          * On SDIO, this runs under wl->mutex. */
2045
2046         reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2047         if (reason == 0xffffffff)       /* shared IRQ */
2048                 return IRQ_NONE;
2049         reason &= dev->irq_mask;
2050         if (!reason)
2051                 return IRQ_NONE;
2052
2053         dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
2054             & 0x0001FC00;
2055         dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON)
2056             & 0x0000DC00;
2057         dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON)
2058             & 0x0000DC00;
2059         dev->dma_reason[3] = b43_read32(dev, B43_MMIO_DMA3_REASON)
2060             & 0x0001DC00;
2061         dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON)
2062             & 0x0000DC00;
2063 /* Unused ring
2064         dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON)
2065             & 0x0000DC00;
2066 */
2067
2068         /* ACK the interrupt. */
2069         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
2070         b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
2071         b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]);
2072         b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
2073         b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
2074         b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
2075 /* Unused ring
2076         b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
2077 */
2078
2079         /* Disable IRQs on the device. The IRQ thread handler will re-enable them. */
2080         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
2081         /* Save the reason bitmasks for the IRQ thread handler. */
2082         dev->irq_reason = reason;
2083
2084         return IRQ_WAKE_THREAD;
2085 }
2086
2087 /* Interrupt handler top-half. This runs with interrupts disabled. */
2088 static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
2089 {
2090         struct b43_wldev *dev = dev_id;
2091         irqreturn_t ret;
2092
2093         if (unlikely(b43_status(dev) < B43_STAT_STARTED))
2094                 return IRQ_NONE;
2095
2096         spin_lock(&dev->wl->hardirq_lock);
2097         ret = b43_do_interrupt(dev);
2098         mmiowb();
2099         spin_unlock(&dev->wl->hardirq_lock);
2100
2101         return ret;
2102 }
2103
2104 /* SDIO interrupt handler. This runs in process context. */
2105 static void b43_sdio_interrupt_handler(struct b43_wldev *dev)
2106 {
2107         struct b43_wl *wl = dev->wl;
2108         irqreturn_t ret;
2109
2110         mutex_lock(&wl->mutex);
2111
2112         ret = b43_do_interrupt(dev);
2113         if (ret == IRQ_WAKE_THREAD)
2114                 b43_do_interrupt_thread(dev);
2115
2116         mutex_unlock(&wl->mutex);
2117 }
2118
2119 void b43_do_release_fw(struct b43_firmware_file *fw)
2120 {
2121         release_firmware(fw->data);
2122         fw->data = NULL;
2123         fw->filename = NULL;
2124 }
2125
2126 static void b43_release_firmware(struct b43_wldev *dev)
2127 {
2128         complete(&dev->fw_load_complete);
2129         b43_do_release_fw(&dev->fw.ucode);
2130         b43_do_release_fw(&dev->fw.pcm);
2131         b43_do_release_fw(&dev->fw.initvals);
2132         b43_do_release_fw(&dev->fw.initvals_band);
2133 }
2134
2135 static void b43_print_fw_helptext(struct b43_wl *wl, bool error)
2136 {
2137         const char text[] =
2138                 "You must go to " \
2139                 "http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware " \
2140                 "and download the correct firmware for this driver version. " \
2141                 "Please carefully read all instructions on this website.\n";
2142
2143         if (error)
2144                 b43err(wl, text);
2145         else
2146                 b43warn(wl, text);
2147 }
2148
2149 static void b43_fw_cb(const struct firmware *firmware, void *context)
2150 {
2151         struct b43_request_fw_context *ctx = context;
2152
2153         ctx->blob = firmware;
2154         complete(&ctx->dev->fw_load_complete);
2155 }
2156
2157 int b43_do_request_fw(struct b43_request_fw_context *ctx,
2158                       const char *name,
2159                       struct b43_firmware_file *fw, bool async)
2160 {
2161         struct b43_fw_header *hdr;
2162         u32 size;
2163         int err;
2164
2165         if (!name) {
2166                 /* Don't fetch anything. Free possibly cached firmware. */
2167                 /* FIXME: We should probably keep it anyway, to save some headache
2168                  * on suspend/resume with multiband devices. */
2169                 b43_do_release_fw(fw);
2170                 return 0;
2171         }
2172         if (fw->filename) {
2173                 if ((fw->type == ctx->req_type) &&
2174                     (strcmp(fw->filename, name) == 0))
2175                         return 0; /* Already have this fw. */
2176                 /* Free the cached firmware first. */
2177                 /* FIXME: We should probably do this later after we successfully
2178                  * got the new fw. This could reduce headache with multiband devices.
2179                  * We could also redesign this to cache the firmware for all possible
2180                  * bands all the time. */
2181                 b43_do_release_fw(fw);
2182         }
2183
2184         switch (ctx->req_type) {
2185         case B43_FWTYPE_PROPRIETARY:
2186                 snprintf(ctx->fwname, sizeof(ctx->fwname),
2187                          "b43%s/%s.fw",
2188                          modparam_fwpostfix, name);
2189                 break;
2190         case B43_FWTYPE_OPENSOURCE:
2191                 snprintf(ctx->fwname, sizeof(ctx->fwname),
2192                          "b43-open%s/%s.fw",
2193                          modparam_fwpostfix, name);
2194                 break;
2195         default:
2196                 B43_WARN_ON(1);
2197                 return -ENOSYS;
2198         }
2199         if (async) {
2200                 /* do this part asynchronously */
2201                 init_completion(&ctx->dev->fw_load_complete);
2202                 err = request_firmware_nowait(THIS_MODULE, 1, ctx->fwname,
2203                                               ctx->dev->dev->dev, GFP_KERNEL,
2204                                               ctx, b43_fw_cb);
2205                 if (err < 0) {
2206                         pr_err("Unable to load firmware\n");
2207                         return err;
2208                 }
2209                 wait_for_completion(&ctx->dev->fw_load_complete);
2210                 if (ctx->blob)
2211                         goto fw_ready;
2212         /* On some ARM systems, the async request will fail, but the next sync
2213          * request works. For this reason, we fall through here
2214          */
2215         }
2216         err = request_firmware(&ctx->blob, ctx->fwname,
2217                                ctx->dev->dev->dev);
2218         if (err == -ENOENT) {
2219                 snprintf(ctx->errors[ctx->req_type],
2220                          sizeof(ctx->errors[ctx->req_type]),
2221                          "Firmware file \"%s\" not found\n",
2222                          ctx->fwname);
2223                 return err;
2224         } else if (err) {
2225                 snprintf(ctx->errors[ctx->req_type],
2226                          sizeof(ctx->errors[ctx->req_type]),
2227                          "Firmware file \"%s\" request failed (err=%d)\n",
2228                          ctx->fwname, err);
2229                 return err;
2230         }
2231 fw_ready:
2232         if (ctx->blob->size < sizeof(struct b43_fw_header))
2233                 goto err_format;
2234         hdr = (struct b43_fw_header *)(ctx->blob->data);
2235         switch (hdr->type) {
2236         case B43_FW_TYPE_UCODE:
2237         case B43_FW_TYPE_PCM:
2238                 size = be32_to_cpu(hdr->size);
2239                 if (size != ctx->blob->size - sizeof(struct b43_fw_header))
2240                         goto err_format;
2241                 /* fallthrough */
2242         case B43_FW_TYPE_IV:
2243                 if (hdr->ver != 1)
2244                         goto err_format;
2245                 break;
2246         default:
2247                 goto err_format;
2248         }
2249
2250         fw->data = ctx->blob;
2251         fw->filename = name;
2252         fw->type = ctx->req_type;
2253
2254         return 0;
2255
2256 err_format:
2257         snprintf(ctx->errors[ctx->req_type],
2258                  sizeof(ctx->errors[ctx->req_type]),
2259                  "Firmware file \"%s\" format error.\n", ctx->fwname);
2260         release_firmware(ctx->blob);
2261
2262         return -EPROTO;
2263 }
2264
2265 /* http://bcm-v4.sipsolutions.net/802.11/Init/Firmware */
2266 static int b43_try_request_fw(struct b43_request_fw_context *ctx)
2267 {
2268         struct b43_wldev *dev = ctx->dev;
2269         struct b43_firmware *fw = &ctx->dev->fw;
2270         struct b43_phy *phy = &dev->phy;
2271         const u8 rev = ctx->dev->dev->core_rev;
2272         const char *filename;
2273         int err;
2274
2275         /* Get microcode */
2276         filename = NULL;
2277         switch (rev) {
2278         case 42:
2279                 if (phy->type == B43_PHYTYPE_AC)
2280                         filename = "ucode42";
2281                 break;
2282         case 40:
2283                 if (phy->type == B43_PHYTYPE_AC)
2284                         filename = "ucode40";
2285                 break;
2286         case 33:
2287                 if (phy->type == B43_PHYTYPE_LCN40)
2288                         filename = "ucode33_lcn40";
2289                 break;
2290         case 30:
2291                 if (phy->type == B43_PHYTYPE_N)
2292                         filename = "ucode30_mimo";
2293                 break;
2294         case 29:
2295                 if (phy->type == B43_PHYTYPE_HT)
2296                         filename = "ucode29_mimo";
2297                 break;
2298         case 26:
2299                 if (phy->type == B43_PHYTYPE_HT)
2300                         filename = "ucode26_mimo";
2301                 break;
2302         case 28:
2303         case 25:
2304                 if (phy->type == B43_PHYTYPE_N)
2305                         filename = "ucode25_mimo";
2306                 else if (phy->type == B43_PHYTYPE_LCN)
2307                         filename = "ucode25_lcn";
2308                 break;
2309         case 24:
2310                 if (phy->type == B43_PHYTYPE_LCN)
2311                         filename = "ucode24_lcn";
2312                 break;
2313         case 23:
2314                 if (phy->type == B43_PHYTYPE_N)
2315                         filename = "ucode16_mimo";
2316                 break;
2317         case 16 ... 19:
2318                 if (phy->type == B43_PHYTYPE_N)
2319                         filename = "ucode16_mimo";
2320                 else if (phy->type == B43_PHYTYPE_LP)
2321                         filename = "ucode16_lp";
2322                 break;
2323         case 15:
2324                 filename = "ucode15";
2325                 break;
2326         case 14:
2327                 filename = "ucode14";
2328                 break;
2329         case 13:
2330                 filename = "ucode13";
2331                 break;
2332         case 11 ... 12:
2333                 filename = "ucode11";
2334                 break;
2335         case 5 ... 10:
2336                 filename = "ucode5";
2337                 break;
2338         }
2339         if (!filename)
2340                 goto err_no_ucode;
2341         err = b43_do_request_fw(ctx, filename, &fw->ucode, true);
2342         if (err)
2343                 goto err_load;
2344
2345         /* Get PCM code */
2346         if ((rev >= 5) && (rev <= 10))
2347                 filename = "pcm5";
2348         else if (rev >= 11)
2349                 filename = NULL;
2350         else
2351                 goto err_no_pcm;
2352         fw->pcm_request_failed = false;
2353         err = b43_do_request_fw(ctx, filename, &fw->pcm, false);
2354         if (err == -ENOENT) {
2355                 /* We did not find a PCM file? Not fatal, but
2356                  * core rev <= 10 must do without hwcrypto then. */
2357                 fw->pcm_request_failed = true;
2358         } else if (err)
2359                 goto err_load;
2360
2361         /* Get initvals */
2362         filename = NULL;
2363         switch (dev->phy.type) {
2364         case B43_PHYTYPE_G:
2365                 if (rev == 13)
2366                         filename = "b0g0initvals13";
2367                 else if (rev >= 5 && rev <= 10)
2368                         filename = "b0g0initvals5";
2369                 break;
2370         case B43_PHYTYPE_N:
2371                 if (rev == 30)
2372                         filename = "n16initvals30";
2373                 else if (rev == 28 || rev == 25)
2374                         filename = "n0initvals25";
2375                 else if (rev == 24)
2376                         filename = "n0initvals24";
2377                 else if (rev == 23)
2378                         filename = "n0initvals16"; /* What about n0initvals22? */
2379                 else if (rev >= 16 && rev <= 18)
2380                         filename = "n0initvals16";
2381                 else if (rev >= 11 && rev <= 12)
2382                         filename = "n0initvals11";
2383                 break;
2384         case B43_PHYTYPE_LP:
2385                 if (rev >= 16 && rev <= 18)
2386                         filename = "lp0initvals16";
2387                 else if (rev == 15)
2388                         filename = "lp0initvals15";
2389                 else if (rev == 14)
2390                         filename = "lp0initvals14";
2391                 else if (rev == 13)
2392                         filename = "lp0initvals13";
2393                 break;
2394         case B43_PHYTYPE_HT:
2395                 if (rev == 29)
2396                         filename = "ht0initvals29";
2397                 else if (rev == 26)
2398                         filename = "ht0initvals26";
2399                 break;
2400         case B43_PHYTYPE_LCN:
2401                 if (rev == 24)
2402                         filename = "lcn0initvals24";
2403                 break;
2404         case B43_PHYTYPE_LCN40:
2405                 if (rev == 33)
2406                         filename = "lcn400initvals33";
2407                 break;
2408         case B43_PHYTYPE_AC:
2409                 if (rev == 42)
2410                         filename = "ac1initvals42";
2411                 else if (rev == 40)
2412                         filename = "ac0initvals40";
2413                 break;
2414         }
2415         if (!filename)
2416                 goto err_no_initvals;
2417         err = b43_do_request_fw(ctx, filename, &fw->initvals, false);
2418         if (err)
2419                 goto err_load;
2420
2421         /* Get bandswitch initvals */
2422         filename = NULL;
2423         switch (dev->phy.type) {
2424         case B43_PHYTYPE_G:
2425                 if (rev == 13)
2426                         filename = "b0g0bsinitvals13";
2427                 else if (rev >= 5 && rev <= 10)
2428                         filename = "b0g0bsinitvals5";
2429                 break;
2430         case B43_PHYTYPE_N:
2431                 if (rev == 30)
2432                         filename = "n16bsinitvals30";
2433                 else if (rev == 28 || rev == 25)
2434                         filename = "n0bsinitvals25";
2435                 else if (rev == 24)
2436                         filename = "n0bsinitvals24";
2437                 else if (rev == 23)
2438                         filename = "n0bsinitvals16"; /* What about n0bsinitvals22? */
2439                 else if (rev >= 16 && rev <= 18)
2440                         filename = "n0bsinitvals16";
2441                 else if (rev >= 11 && rev <= 12)
2442                         filename = "n0bsinitvals11";
2443                 break;
2444         case B43_PHYTYPE_LP:
2445                 if (rev >= 16 && rev <= 18)
2446                         filename = "lp0bsinitvals16";
2447                 else if (rev == 15)
2448                         filename = "lp0bsinitvals15";
2449                 else if (rev == 14)
2450                         filename = "lp0bsinitvals14";
2451                 else if (rev == 13)
2452                         filename = "lp0bsinitvals13";
2453                 break;
2454         case B43_PHYTYPE_HT:
2455                 if (rev == 29)
2456                         filename = "ht0bsinitvals29";
2457                 else if (rev == 26)
2458                         filename = "ht0bsinitvals26";
2459                 break;
2460         case B43_PHYTYPE_LCN:
2461                 if (rev == 24)
2462                         filename = "lcn0bsinitvals24";
2463                 break;
2464         case B43_PHYTYPE_LCN40:
2465                 if (rev == 33)
2466                         filename = "lcn400bsinitvals33";
2467                 break;
2468         case B43_PHYTYPE_AC:
2469                 if (rev == 42)
2470                         filename = "ac1bsinitvals42";
2471                 else if (rev == 40)
2472                         filename = "ac0bsinitvals40";
2473                 break;
2474         }
2475         if (!filename)
2476                 goto err_no_initvals;
2477         err = b43_do_request_fw(ctx, filename, &fw->initvals_band, false);
2478         if (err)
2479                 goto err_load;
2480
2481         fw->opensource = (ctx->req_type == B43_FWTYPE_OPENSOURCE);
2482
2483         return 0;
2484
2485 err_no_ucode:
2486         err = ctx->fatal_failure = -EOPNOTSUPP;
2487         b43err(dev->wl, "The driver does not know which firmware (ucode) "
2488                "is required for your device (wl-core rev %u)\n", rev);
2489         goto error;
2490
2491 err_no_pcm:
2492         err = ctx->fatal_failure = -EOPNOTSUPP;
2493         b43err(dev->wl, "The driver does not know which firmware (PCM) "
2494                "is required for your device (wl-core rev %u)\n", rev);
2495         goto error;
2496
2497 err_no_initvals:
2498         err = ctx->fatal_failure = -EOPNOTSUPP;
2499         b43err(dev->wl, "The driver does not know which firmware (initvals) "
2500                "is required for your device (wl-core rev %u)\n", rev);
2501         goto error;
2502
2503 err_load:
2504         /* We failed to load this firmware image. The error message
2505          * already is in ctx->errors. Return and let our caller decide
2506          * what to do. */
2507         goto error;
2508
2509 error:
2510         b43_release_firmware(dev);
2511         return err;
2512 }
2513
2514 static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl);
2515 static void b43_one_core_detach(struct b43_bus_dev *dev);
2516 static int b43_rng_init(struct b43_wl *wl);
2517
2518 static void b43_request_firmware(struct work_struct *work)
2519 {
2520         struct b43_wl *wl = container_of(work,
2521                             struct b43_wl, firmware_load);
2522         struct b43_wldev *dev = wl->current_dev;
2523         struct b43_request_fw_context *ctx;
2524         unsigned int i;
2525         int err;
2526         const char *errmsg;
2527
2528         ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
2529         if (!ctx)
2530                 return;
2531         ctx->dev = dev;
2532
2533         ctx->req_type = B43_FWTYPE_PROPRIETARY;
2534         err = b43_try_request_fw(ctx);
2535         if (!err)
2536                 goto start_ieee80211; /* Successfully loaded it. */
2537         /* Was fw version known? */
2538         if (ctx->fatal_failure)
2539                 goto out;
2540
2541         /* proprietary fw not found, try open source */
2542         ctx->req_type = B43_FWTYPE_OPENSOURCE;
2543         err = b43_try_request_fw(ctx);
2544         if (!err)
2545                 goto start_ieee80211; /* Successfully loaded it. */
2546         if(ctx->fatal_failure)
2547                 goto out;
2548
2549         /* Could not find a usable firmware. Print the errors. */
2550         for (i = 0; i < B43_NR_FWTYPES; i++) {
2551                 errmsg = ctx->errors[i];
2552                 if (strlen(errmsg))
2553                         b43err(dev->wl, "%s", errmsg);
2554         }
2555         b43_print_fw_helptext(dev->wl, 1);
2556         goto out;
2557
2558 start_ieee80211:
2559         wl->hw->queues = B43_QOS_QUEUE_NUM;
2560         if (!modparam_qos || dev->fw.opensource)
2561                 wl->hw->queues = 1;
2562
2563         err = ieee80211_register_hw(wl->hw);
2564         if (err)
2565                 goto err_one_core_detach;
2566         wl->hw_registred = true;
2567         b43_leds_register(wl->current_dev);
2568
2569         /* Register HW RNG driver */
2570         b43_rng_init(wl);
2571
2572         goto out;
2573
2574 err_one_core_detach:
2575         b43_one_core_detach(dev->dev);
2576
2577 out:
2578         kfree(ctx);
2579 }
2580
2581 static int b43_upload_microcode(struct b43_wldev *dev)
2582 {
2583         struct wiphy *wiphy = dev->wl->hw->wiphy;
2584         const size_t hdr_len = sizeof(struct b43_fw_header);
2585         const __be32 *data;
2586         unsigned int i, len;
2587         u16 fwrev, fwpatch, fwdate, fwtime;
2588         u32 tmp, macctl;
2589         int err = 0;
2590
2591         /* Jump the microcode PSM to offset 0 */
2592         macctl = b43_read32(dev, B43_MMIO_MACCTL);
2593         B43_WARN_ON(macctl & B43_MACCTL_PSM_RUN);
2594         macctl |= B43_MACCTL_PSM_JMP0;
2595         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2596         /* Zero out all microcode PSM registers and shared memory. */
2597         for (i = 0; i < 64; i++)
2598                 b43_shm_write16(dev, B43_SHM_SCRATCH, i, 0);
2599         for (i = 0; i < 4096; i += 2)
2600                 b43_shm_write16(dev, B43_SHM_SHARED, i, 0);
2601
2602         /* Upload Microcode. */
2603         data = (__be32 *) (dev->fw.ucode.data->data + hdr_len);
2604         len = (dev->fw.ucode.data->size - hdr_len) / sizeof(__be32);
2605         b43_shm_control_word(dev, B43_SHM_UCODE | B43_SHM_AUTOINC_W, 0x0000);
2606         for (i = 0; i < len; i++) {
2607                 b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
2608                 udelay(10);
2609         }
2610
2611         if (dev->fw.pcm.data) {
2612                 /* Upload PCM data. */
2613                 data = (__be32 *) (dev->fw.pcm.data->data + hdr_len);
2614                 len = (dev->fw.pcm.data->size - hdr_len) / sizeof(__be32);
2615                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EA);
2616                 b43_write32(dev, B43_MMIO_SHM_DATA, 0x00004000);
2617                 /* No need for autoinc bit in SHM_HW */
2618                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EB);
2619                 for (i = 0; i < len; i++) {
2620                         b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
2621                         udelay(10);
2622                 }
2623         }
2624
2625         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL);
2626
2627         /* Start the microcode PSM */
2628         b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PSM_JMP0,
2629                       B43_MACCTL_PSM_RUN);
2630
2631         /* Wait for the microcode to load and respond */
2632         i = 0;
2633         while (1) {
2634                 tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2635                 if (tmp == B43_IRQ_MAC_SUSPENDED)
2636                         break;
2637                 i++;
2638                 if (i >= 20) {
2639                         b43err(dev->wl, "Microcode not responding\n");
2640                         b43_print_fw_helptext(dev->wl, 1);
2641                         err = -ENODEV;
2642                         goto error;
2643                 }
2644                 msleep(50);
2645         }
2646         b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);       /* dummy read */
2647
2648         /* Get and check the revisions. */
2649         fwrev = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEREV);
2650         fwpatch = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEPATCH);
2651         fwdate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEDATE);
2652         fwtime = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODETIME);
2653
2654         if (fwrev <= 0x128) {
2655                 b43err(dev->wl, "YOUR FIRMWARE IS TOO OLD. Firmware from "
2656                        "binary drivers older than version 4.x is unsupported. "
2657                        "You must upgrade your firmware files.\n");
2658                 b43_print_fw_helptext(dev->wl, 1);
2659                 err = -EOPNOTSUPP;
2660                 goto error;
2661         }
2662         dev->fw.rev = fwrev;
2663         dev->fw.patch = fwpatch;
2664         if (dev->fw.rev >= 598)
2665                 dev->fw.hdr_format = B43_FW_HDR_598;
2666         else if (dev->fw.rev >= 410)
2667                 dev->fw.hdr_format = B43_FW_HDR_410;
2668         else
2669                 dev->fw.hdr_format = B43_FW_HDR_351;
2670         WARN_ON(dev->fw.opensource != (fwdate == 0xFFFF));
2671
2672         dev->qos_enabled = dev->wl->hw->queues > 1;
2673         /* Default to firmware/hardware crypto acceleration. */
2674         dev->hwcrypto_enabled = true;
2675
2676         if (dev->fw.opensource) {
2677                 u16 fwcapa;
2678
2679                 /* Patchlevel info is encoded in the "time" field. */
2680                 dev->fw.patch = fwtime;
2681                 b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n",
2682                         dev->fw.rev, dev->fw.patch);
2683
2684                 fwcapa = b43_fwcapa_read(dev);
2685                 if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev->fw.pcm_request_failed) {
2686                         b43info(dev->wl, "Hardware crypto acceleration not supported by firmware\n");
2687                         /* Disable hardware crypto and fall back to software crypto. */
2688                         dev->hwcrypto_enabled = false;
2689                 }
2690                 /* adding QoS support should use an offline discovery mechanism */
2691                 WARN(fwcapa & B43_FWCAPA_QOS, "QoS in OpenFW not supported\n");
2692         } else {
2693                 b43info(dev->wl, "Loading firmware version %u.%u "
2694                         "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
2695                         fwrev, fwpatch,
2696                         (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
2697                         (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
2698                 if (dev->fw.pcm_request_failed) {
2699                         b43warn(dev->wl, "No \"pcm5.fw\" firmware file found. "
2700                                 "Hardware accelerated cryptography is disabled.\n");
2701                         b43_print_fw_helptext(dev->wl, 0);
2702                 }
2703         }
2704
2705         snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u",
2706                         dev->fw.rev, dev->fw.patch);
2707         wiphy->hw_version = dev->dev->core_id;
2708
2709         if (dev->fw.hdr_format == B43_FW_HDR_351) {
2710                 /* We're over the deadline, but we keep support for old fw
2711                  * until it turns out to be in major conflict with something new. */
2712                 b43warn(dev->wl, "You are using an old firmware image. "
2713                         "Support for old firmware will be removed soon "
2714                         "(official deadline was July 2008).\n");
2715                 b43_print_fw_helptext(dev->wl, 0);
2716         }
2717
2718         return 0;
2719
2720 error:
2721         /* Stop the microcode PSM. */
2722         b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PSM_RUN,
2723                       B43_MACCTL_PSM_JMP0);
2724
2725         return err;
2726 }
2727
2728 static int b43_write_initvals(struct b43_wldev *dev,
2729                               const struct b43_iv *ivals,
2730                               size_t count,
2731                               size_t array_size)
2732 {
2733         const struct b43_iv *iv;
2734         u16 offset;
2735         size_t i;
2736         bool bit32;
2737
2738         BUILD_BUG_ON(sizeof(struct b43_iv) != 6);
2739         iv = ivals;
2740         for (i = 0; i < count; i++) {
2741                 if (array_size < sizeof(iv->offset_size))
2742                         goto err_format;
2743                 array_size -= sizeof(iv->offset_size);
2744                 offset = be16_to_cpu(iv->offset_size);
2745                 bit32 = !!(offset & B43_IV_32BIT);
2746                 offset &= B43_IV_OFFSET_MASK;
2747                 if (offset >= 0x1000)
2748                         goto err_format;
2749                 if (bit32) {
2750                         u32 value;
2751
2752                         if (array_size < sizeof(iv->data.d32))
2753                                 goto err_format;
2754                         array_size -= sizeof(iv->data.d32);
2755
2756                         value = get_unaligned_be32(&iv->data.d32);
2757                         b43_write32(dev, offset, value);
2758
2759                         iv = (const struct b43_iv *)((const uint8_t *)iv +
2760                                                         sizeof(__be16) +
2761                                                         sizeof(__be32));
2762                 } else {
2763                         u16 value;
2764
2765                         if (array_size < sizeof(iv->data.d16))
2766                                 goto err_format;
2767                         array_size -= sizeof(iv->data.d16);
2768
2769                         value = be16_to_cpu(iv->data.d16);
2770                         b43_write16(dev, offset, value);
2771
2772                         iv = (const struct b43_iv *)((const uint8_t *)iv +
2773                                                         sizeof(__be16) +
2774                                                         sizeof(__be16));
2775                 }
2776         }
2777         if (array_size)
2778                 goto err_format;
2779
2780         return 0;
2781
2782 err_format:
2783         b43err(dev->wl, "Initial Values Firmware file-format error.\n");
2784         b43_print_fw_helptext(dev->wl, 1);
2785
2786         return -EPROTO;
2787 }
2788
2789 static int b43_upload_initvals(struct b43_wldev *dev)
2790 {
2791         const size_t hdr_len = sizeof(struct b43_fw_header);
2792         const struct b43_fw_header *hdr;
2793         struct b43_firmware *fw = &dev->fw;
2794         const struct b43_iv *ivals;
2795         size_t count;
2796
2797         hdr = (const struct b43_fw_header *)(fw->initvals.data->data);
2798         ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len);
2799         count = be32_to_cpu(hdr->size);
2800         return b43_write_initvals(dev, ivals, count,
2801                                  fw->initvals.data->size - hdr_len);
2802 }
2803
2804 static int b43_upload_initvals_band(struct b43_wldev *dev)
2805 {
2806         const size_t hdr_len = sizeof(struct b43_fw_header);
2807         const struct b43_fw_header *hdr;
2808         struct b43_firmware *fw = &dev->fw;
2809         const struct b43_iv *ivals;
2810         size_t count;
2811
2812         if (!fw->initvals_band.data)
2813                 return 0;
2814
2815         hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data);
2816         ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len);
2817         count = be32_to_cpu(hdr->size);
2818         return b43_write_initvals(dev, ivals, count,
2819                                   fw->initvals_band.data->size - hdr_len);
2820 }
2821
2822 /* Initialize the GPIOs
2823  * http://bcm-specs.sipsolutions.net/GPIO
2824  */
2825
2826 #ifdef CONFIG_B43_SSB
2827 static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev)
2828 {
2829         struct ssb_bus *bus = dev->dev->sdev->bus;
2830
2831 #ifdef CONFIG_SSB_DRIVER_PCICORE
2832         return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
2833 #else
2834         return bus->chipco.dev;
2835 #endif
2836 }
2837 #endif
2838
2839 static int b43_gpio_init(struct b43_wldev *dev)
2840 {
2841 #ifdef CONFIG_B43_SSB
2842         struct ssb_device *gpiodev;
2843 #endif
2844         u32 mask, set;
2845
2846         b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0);
2847         b43_maskset16(dev, B43_MMIO_GPIO_MASK, ~0, 0xF);
2848
2849         mask = 0x0000001F;
2850         set = 0x0000000F;
2851         if (dev->dev->chip_id == 0x4301) {
2852                 mask |= 0x0060;
2853                 set |= 0x0060;
2854         } else if (dev->dev->chip_id == 0x5354) {
2855                 /* Don't allow overtaking buttons GPIOs */
2856                 set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */
2857         }
2858
2859         if (0 /* FIXME: conditional unknown */ ) {
2860                 b43_write16(dev, B43_MMIO_GPIO_MASK,
2861                             b43_read16(dev, B43_MMIO_GPIO_MASK)
2862                             | 0x0100);
2863                 /* BT Coexistance Input */
2864                 mask |= 0x0080;
2865                 set |= 0x0080;
2866                 /* BT Coexistance Out */
2867                 mask |= 0x0100;
2868                 set |= 0x0100;
2869         }
2870         if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) {
2871                 /* PA is controlled by gpio 9, let ucode handle it */
2872                 b43_write16(dev, B43_MMIO_GPIO_MASK,
2873                             b43_read16(dev, B43_MMIO_GPIO_MASK)
2874                             | 0x0200);
2875                 mask |= 0x0200;
2876                 set |= 0x0200;
2877         }
2878
2879         switch (dev->dev->bus_type) {
2880 #ifdef CONFIG_B43_BCMA
2881         case B43_BUS_BCMA:
2882                 bcma_chipco_gpio_control(&dev->dev->bdev->bus->drv_cc, mask, set);
2883                 break;
2884 #endif
2885 #ifdef CONFIG_B43_SSB
2886         case B43_BUS_SSB:
2887                 gpiodev = b43_ssb_gpio_dev(dev);
2888                 if (gpiodev)
2889                         ssb_write32(gpiodev, B43_GPIO_CONTROL,
2890                                     (ssb_read32(gpiodev, B43_GPIO_CONTROL)
2891                                     & ~mask) | set);
2892                 break;
2893 #endif
2894         }
2895
2896         return 0;
2897 }
2898
2899 /* Turn off all GPIO stuff. Call this on module unload, for example. */
2900 static void b43_gpio_cleanup(struct b43_wldev *dev)
2901 {
2902 #ifdef CONFIG_B43_SSB
2903         struct ssb_device *gpiodev;
2904 #endif
2905
2906         switch (dev->dev->bus_type) {
2907 #ifdef CONFIG_B43_BCMA
2908         case B43_BUS_BCMA:
2909                 bcma_chipco_gpio_control(&dev->dev->bdev->bus->drv_cc, ~0, 0);
2910                 break;
2911 #endif
2912 #ifdef CONFIG_B43_SSB
2913         case B43_BUS_SSB:
2914                 gpiodev = b43_ssb_gpio_dev(dev);
2915                 if (gpiodev)
2916                         ssb_write32(gpiodev, B43_GPIO_CONTROL, 0);
2917                 break;
2918 #endif
2919         }
2920 }
2921
2922 /* http://bcm-specs.sipsolutions.net/EnableMac */
2923 void b43_mac_enable(struct b43_wldev *dev)
2924 {
2925         if (b43_debug(dev, B43_DBG_FIRMWARE)) {
2926                 u16 fwstate;
2927
2928                 fwstate = b43_shm_read16(dev, B43_SHM_SHARED,
2929                                          B43_SHM_SH_UCODESTAT);
2930                 if ((fwstate != B43_SHM_SH_UCODESTAT_SUSP) &&
2931                     (fwstate != B43_SHM_SH_UCODESTAT_SLEEP)) {
2932                         b43err(dev->wl, "b43_mac_enable(): The firmware "
2933                                "should be suspended, but current state is %u\n",
2934                                fwstate);
2935                 }
2936         }
2937
2938         dev->mac_suspended--;
2939         B43_WARN_ON(dev->mac_suspended < 0);
2940         if (dev->mac_suspended == 0) {
2941                 b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_ENABLED);
2942                 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON,
2943                             B43_IRQ_MAC_SUSPENDED);
2944                 /* Commit writes */
2945                 b43_read32(dev, B43_MMIO_MACCTL);
2946                 b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2947                 b43_power_saving_ctl_bits(dev, 0);
2948         }
2949 }
2950
2951 /* http://bcm-specs.sipsolutions.net/SuspendMAC */
2952 void b43_mac_suspend(struct b43_wldev *dev)
2953 {
2954         int i;
2955         u32 tmp;
2956
2957         might_sleep();
2958         B43_WARN_ON(dev->mac_suspended < 0);
2959
2960         if (dev->mac_suspended == 0) {
2961                 b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
2962                 b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_ENABLED, 0);
2963                 /* force pci to flush the write */
2964                 b43_read32(dev, B43_MMIO_MACCTL);
2965                 for (i = 35; i; i--) {
2966                         tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2967                         if (tmp & B43_IRQ_MAC_SUSPENDED)
2968                                 goto out;
2969                         udelay(10);
2970                 }
2971                 /* Hm, it seems this will take some time. Use msleep(). */
2972                 for (i = 40; i; i--) {
2973                         tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2974                         if (tmp & B43_IRQ_MAC_SUSPENDED)
2975                                 goto out;
2976                         msleep(1);
2977                 }
2978                 b43err(dev->wl, "MAC suspend failed\n");
2979         }
2980 out:
2981         dev->mac_suspended++;
2982 }
2983
2984 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MacPhyClkSet */
2985 void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on)
2986 {
2987         u32 tmp;
2988
2989         switch (dev->dev->bus_type) {
2990 #ifdef CONFIG_B43_BCMA
2991         case B43_BUS_BCMA:
2992                 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
2993                 if (on)
2994                         tmp |= B43_BCMA_IOCTL_MACPHYCLKEN;
2995                 else
2996                         tmp &= ~B43_BCMA_IOCTL_MACPHYCLKEN;
2997                 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
2998                 break;
2999 #endif
3000 #ifdef CONFIG_B43_SSB
3001         case B43_BUS_SSB:
3002                 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
3003                 if (on)
3004                         tmp |= B43_TMSLOW_MACPHYCLKEN;
3005                 else
3006                         tmp &= ~B43_TMSLOW_MACPHYCLKEN;
3007                 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
3008                 break;
3009 #endif
3010         }
3011 }
3012
3013 /* brcms_b_switch_macfreq */
3014 void b43_mac_switch_freq(struct b43_wldev *dev, u8 spurmode)
3015 {
3016         u16 chip_id = dev->dev->chip_id;
3017
3018         if (chip_id == BCMA_CHIP_ID_BCM4331) {
3019                 switch (spurmode) {
3020                 case 2: /* 168 Mhz: 2^26/168 = 0x61862 */
3021                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x1862);
3022                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x6);
3023                         break;
3024                 case 1: /* 164 Mhz: 2^26/164 = 0x63e70 */
3025                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x3e70);
3026                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x6);
3027                         break;
3028                 default: /* 160 Mhz: 2^26/160 = 0x66666 */
3029                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x6666);
3030                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x6);
3031                         break;
3032                 }
3033         } else if (chip_id == BCMA_CHIP_ID_BCM43131 ||
3034             chip_id == BCMA_CHIP_ID_BCM43217 ||
3035             chip_id == BCMA_CHIP_ID_BCM43222 ||
3036             chip_id == BCMA_CHIP_ID_BCM43224 ||
3037             chip_id == BCMA_CHIP_ID_BCM43225 ||
3038             chip_id == BCMA_CHIP_ID_BCM43227 ||
3039             chip_id == BCMA_CHIP_ID_BCM43228) {
3040                 switch (spurmode) {
3041                 case 2: /* 126 Mhz */
3042                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x2082);
3043                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
3044                         break;
3045                 case 1: /* 123 Mhz */
3046                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x5341);
3047                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
3048                         break;
3049                 default: /* 120 Mhz */
3050                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x8889);
3051                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
3052                         break;
3053                 }
3054         } else if (dev->phy.type == B43_PHYTYPE_LCN) {
3055                 switch (spurmode) {
3056                 case 1: /* 82 Mhz */
3057                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x7CE0);
3058                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0xC);
3059                         break;
3060                 default: /* 80 Mhz */
3061                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0xCCCD);
3062                         b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0xC);
3063                         break;
3064                 }
3065         }
3066 }
3067
3068 static void b43_adjust_opmode(struct b43_wldev *dev)
3069 {
3070         struct b43_wl *wl = dev->wl;
3071         u32 ctl;
3072         u16 cfp_pretbtt;
3073
3074         ctl = b43_read32(dev, B43_MMIO_MACCTL);
3075         /* Reset status to STA infrastructure mode. */
3076         ctl &= ~B43_MACCTL_AP;
3077         ctl &= ~B43_MACCTL_KEEP_CTL;
3078         ctl &= ~B43_MACCTL_KEEP_BADPLCP;
3079         ctl &= ~B43_MACCTL_KEEP_BAD;
3080         ctl &= ~B43_MACCTL_PROMISC;
3081         ctl &= ~B43_MACCTL_BEACPROMISC;
3082         ctl |= B43_MACCTL_INFRA;
3083
3084         if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
3085             b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
3086                 ctl |= B43_MACCTL_AP;
3087         else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC))
3088                 ctl &= ~B43_MACCTL_INFRA;
3089
3090         if (wl->filter_flags & FIF_CONTROL)
3091                 ctl |= B43_MACCTL_KEEP_CTL;
3092         if (wl->filter_flags & FIF_FCSFAIL)
3093                 ctl |= B43_MACCTL_KEEP_BAD;
3094         if (wl->filter_flags & FIF_PLCPFAIL)
3095                 ctl |= B43_MACCTL_KEEP_BADPLCP;
3096         if (wl->filter_flags & FIF_PROMISC_IN_BSS)
3097                 ctl |= B43_MACCTL_PROMISC;
3098         if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC)
3099                 ctl |= B43_MACCTL_BEACPROMISC;
3100
3101         /* Workaround: On old hardware the HW-MAC-address-filter
3102          * doesn't work properly, so always run promisc in filter
3103          * it in software. */
3104         if (dev->dev->core_rev <= 4)
3105                 ctl |= B43_MACCTL_PROMISC;
3106
3107         b43_write32(dev, B43_MMIO_MACCTL, ctl);
3108
3109         cfp_pretbtt = 2;
3110         if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) {
3111                 if (dev->dev->chip_id == 0x4306 &&
3112                     dev->dev->chip_rev == 3)
3113                         cfp_pretbtt = 100;
3114                 else
3115                         cfp_pretbtt = 50;
3116         }
3117         b43_write16(dev, 0x612, cfp_pretbtt);
3118
3119         /* FIXME: We don't currently implement the PMQ mechanism,
3120          *        so always disable it. If we want to implement PMQ,
3121          *        we need to enable it here (clear DISCPMQ) in AP mode.
3122          */
3123         if (0  /* ctl & B43_MACCTL_AP */)
3124                 b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_DISCPMQ, 0);
3125         else
3126                 b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_DISCPMQ);
3127 }
3128
3129 static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm)
3130 {
3131         u16 offset;
3132
3133         if (is_ofdm) {
3134                 offset = 0x480;
3135                 offset += (b43_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2;
3136         } else {
3137                 offset = 0x4C0;
3138                 offset += (b43_plcp_get_ratecode_cck(rate) & 0x000F) * 2;
3139         }
3140         b43_shm_write16(dev, B43_SHM_SHARED, offset + 0x20,
3141                         b43_shm_read16(dev, B43_SHM_SHARED, offset));
3142 }
3143
3144 static void b43_rate_memory_init(struct b43_wldev *dev)
3145 {
3146         switch (dev->phy.type) {
3147         case B43_PHYTYPE_A:
3148         case B43_PHYTYPE_G:
3149         case B43_PHYTYPE_N:
3150         case B43_PHYTYPE_LP:
3151         case B43_PHYTYPE_HT:
3152         case B43_PHYTYPE_LCN:
3153                 b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1);
3154                 b43_rate_memory_write(dev, B43_OFDM_RATE_9MB, 1);
3155                 b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1);
3156                 b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1);
3157                 b43_rate_memory_write(dev, B43_OFDM_RATE_24MB, 1);
3158                 b43_rate_memory_write(dev, B43_OFDM_RATE_36MB, 1);
3159                 b43_rate_memory_write(dev, B43_OFDM_RATE_48MB, 1);
3160                 b43_rate_memory_write(dev, B43_OFDM_RATE_54MB, 1);
3161                 if (dev->phy.type == B43_PHYTYPE_A)
3162                         break;
3163                 /* fallthrough */
3164         case B43_PHYTYPE_B:
3165                 b43_rate_memory_write(dev, B43_CCK_RATE_1MB, 0);
3166                 b43_rate_memory_write(dev, B43_CCK_RATE_2MB, 0);
3167                 b43_rate_memory_write(dev, B43_CCK_RATE_5MB, 0);
3168                 b43_rate_memory_write(dev, B43_CCK_RATE_11MB, 0);
3169                 break;
3170         default:
3171                 B43_WARN_ON(1);
3172         }
3173 }
3174
3175 /* Set the default values for the PHY TX Control Words. */
3176 static void b43_set_phytxctl_defaults(struct b43_wldev *dev)
3177 {
3178         u16 ctl = 0;
3179
3180         ctl |= B43_TXH_PHY_ENC_CCK;
3181         ctl |= B43_TXH_PHY_ANT01AUTO;
3182         ctl |= B43_TXH_PHY_TXPWR;
3183
3184         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl);
3185         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, ctl);
3186         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, ctl);
3187 }
3188
3189 /* Set the TX-Antenna for management frames sent by firmware. */
3190 static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna)
3191 {
3192         u16 ant;
3193         u16 tmp;
3194
3195         ant = b43_antenna_to_phyctl(antenna);
3196
3197         /* For ACK/CTS */
3198         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL);
3199         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
3200         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, tmp);
3201         /* For Probe Resposes */
3202         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL);
3203         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
3204         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp);
3205 }
3206
3207 /* This is the opposite of b43_chip_init() */
3208 static void b43_chip_exit(struct b43_wldev *dev)
3209 {
3210         b43_phy_exit(dev);
3211         b43_gpio_cleanup(dev);
3212         /* firmware is released later */
3213 }
3214
3215 /* Initialize the chip
3216  * http://bcm-specs.sipsolutions.net/ChipInit
3217  */
3218 static int b43_chip_init(struct b43_wldev *dev)
3219 {
3220         struct b43_phy *phy = &dev->phy;
3221         int err;
3222         u32 macctl;
3223         u16 value16;
3224
3225         /* Initialize the MAC control */
3226         macctl = B43_MACCTL_IHR_ENABLED | B43_MACCTL_SHM_ENABLED;
3227         if (dev->phy.gmode)
3228                 macctl |= B43_MACCTL_GMODE;
3229         macctl |= B43_MACCTL_INFRA;
3230         b43_write32(dev, B43_MMIO_MACCTL, macctl);
3231
3232         err = b43_upload_microcode(dev);
3233         if (err)
3234                 goto out;       /* firmware is released later */
3235
3236         err = b43_gpio_init(dev);
3237         if (err)
3238                 goto out;       /* firmware is released later */
3239
3240         err = b43_upload_initvals(dev);
3241         if (err)
3242                 goto err_gpio_clean;
3243
3244         err = b43_upload_initvals_band(dev);
3245         if (err)
3246                 goto err_gpio_clean;
3247
3248         /* Turn the Analog on and initialize the PHY. */
3249         phy->ops->switch_analog(dev, 1);
3250         err = b43_phy_init(dev);
3251         if (err)
3252                 goto err_gpio_clean;
3253
3254         /* Disable Interference Mitigation. */
3255         if (phy->ops->interf_mitigation)
3256                 phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE);
3257
3258         /* Select the antennae */
3259         if (phy->ops->set_rx_antenna)
3260                 phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
3261         b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT);
3262
3263         if (phy->type == B43_PHYTYPE_B) {
3264                 value16 = b43_read16(dev, 0x005E);
3265                 value16 |= 0x0004;
3266                 b43_write16(dev, 0x005E, value16);
3267         }
3268         b43_write32(dev, 0x0100, 0x01000000);
3269         if (dev->dev->core_rev < 5)
3270                 b43_write32(dev, 0x010C, 0x01000000);
3271
3272         b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_INFRA, 0);
3273         b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_INFRA);
3274
3275         /* Probe Response Timeout value */
3276         /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */
3277         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 0);
3278
3279         /* Initially set the wireless operation mode. */
3280         b43_adjust_opmode(dev);
3281
3282         if (dev->dev->core_rev < 3) {
3283                 b43_write16(dev, 0x060E, 0x0000);
3284                 b43_write16(dev, 0x0610, 0x8000);
3285                 b43_write16(dev, 0x0604, 0x0000);
3286                 b43_write16(dev, 0x0606, 0x0200);
3287         } else {
3288                 b43_write32(dev, 0x0188, 0x80000000);
3289                 b43_write32(dev, 0x018C, 0x02000000);
3290         }
3291         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000);
3292         b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001FC00);
3293         b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
3294         b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
3295         b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00);
3296         b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00);
3297         b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
3298
3299         b43_mac_phy_clock_set(dev, true);
3300
3301         switch (dev->dev->bus_type) {
3302 #ifdef CONFIG_B43_BCMA
3303         case B43_BUS_BCMA:
3304                 /* FIXME: 0xE74 is quite common, but should be read from CC */
3305                 b43_write16(dev, B43_MMIO_POWERUP_DELAY, 0xE74);
3306                 break;
3307 #endif
3308 #ifdef CONFIG_B43_SSB
3309         case B43_BUS_SSB:
3310                 b43_write16(dev, B43_MMIO_POWERUP_DELAY,
3311                             dev->dev->sdev->bus->chipco.fast_pwrup_delay);
3312                 break;
3313 #endif
3314         }
3315
3316         err = 0;
3317         b43dbg(dev->wl, "Chip initialized\n");
3318 out:
3319         return err;
3320
3321 err_gpio_clean:
3322         b43_gpio_cleanup(dev);
3323         return err;
3324 }
3325
3326 static void b43_periodic_every60sec(struct b43_wldev *dev)
3327 {
3328         const struct b43_phy_operations *ops = dev->phy.ops;
3329
3330         if (ops->pwork_60sec)
3331                 ops->pwork_60sec(dev);
3332
3333         /* Force check the TX power emission now. */
3334         b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME);
3335 }
3336
3337 static void b43_periodic_every30sec(struct b43_wldev *dev)
3338 {
3339         /* Update device statistics. */
3340         b43_calculate_link_quality(dev);
3341 }
3342
3343 static void b43_periodic_every15sec(struct b43_wldev *dev)
3344 {
3345         struct b43_phy *phy = &dev->phy;
3346         u16 wdr;
3347
3348         if (dev->fw.opensource) {
3349                 /* Check if the firmware is still alive.
3350                  * It will reset the watchdog counter to 0 in its idle loop. */
3351                 wdr = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_WATCHDOG_REG);
3352                 if (unlikely(wdr)) {
3353                         b43err(dev->wl, "Firmware watchdog: The firmware died!\n");
3354                         b43_controller_restart(dev, "Firmware watchdog");
3355                         return;
3356                 } else {
3357                         b43_shm_write16(dev, B43_SHM_SCRATCH,
3358                                         B43_WATCHDOG_REG, 1);
3359                 }
3360         }
3361
3362         if (phy->ops->pwork_15sec)
3363                 phy->ops->pwork_15sec(dev);
3364
3365         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
3366         wmb();
3367
3368 #if B43_DEBUG
3369         if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
3370                 unsigned int i;
3371
3372                 b43dbg(dev->wl, "Stats: %7u IRQs/sec, %7u TX/sec, %7u RX/sec\n",
3373                        dev->irq_count / 15,
3374                        dev->tx_count / 15,
3375                        dev->rx_count / 15);
3376                 dev->irq_count = 0;
3377                 dev->tx_count = 0;
3378                 dev->rx_count = 0;
3379                 for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
3380                         if (dev->irq_bit_count[i]) {
3381                                 b43dbg(dev->wl, "Stats: %7u IRQ-%02u/sec (0x%08X)\n",
3382                                        dev->irq_bit_count[i] / 15, i, (1 << i));
3383                                 dev->irq_bit_count[i] = 0;
3384                         }
3385                 }
3386         }
3387 #endif
3388 }
3389
3390 static void do_periodic_work(struct b43_wldev *dev)
3391 {
3392         unsigned int state;
3393
3394         state = dev->periodic_state;
3395         if (state % 4 == 0)
3396                 b43_periodic_every60sec(dev);
3397         if (state % 2 == 0)
3398                 b43_periodic_every30sec(dev);
3399         b43_periodic_every15sec(dev);
3400 }
3401
3402 /* Periodic work locking policy:
3403  *      The whole periodic work handler is protected by
3404  *      wl->mutex. If another lock is needed somewhere in the
3405  *      pwork callchain, it's acquired in-place, where it's needed.
3406  */
3407 static void b43_periodic_work_handler(struct work_struct *work)
3408 {
3409         struct b43_wldev *dev = container_of(work, struct b43_wldev,
3410                                              periodic_work.work);
3411         struct b43_wl *wl = dev->wl;
3412         unsigned long delay;
3413
3414         mutex_lock(&wl->mutex);
3415
3416         if (unlikely(b43_status(dev) != B43_STAT_STARTED))
3417                 goto out;
3418         if (b43_debug(dev, B43_DBG_PWORK_STOP))
3419                 goto out_requeue;
3420
3421         do_periodic_work(dev);
3422
3423         dev->periodic_state++;
3424 out_requeue:
3425         if (b43_debug(dev, B43_DBG_PWORK_FAST))
3426                 delay = msecs_to_jiffies(50);
3427         else
3428                 delay = round_jiffies_relative(HZ * 15);
3429         ieee80211_queue_delayed_work(wl->hw, &dev->periodic_work, delay);
3430 out:
3431         mutex_unlock(&wl->mutex);
3432 }
3433
3434 static void b43_periodic_tasks_setup(struct b43_wldev *dev)
3435 {
3436         struct delayed_work *work = &dev->periodic_work;
3437
3438         dev->periodic_state = 0;
3439         INIT_DELAYED_WORK(work, b43_periodic_work_handler);
3440         ieee80211_queue_delayed_work(dev->wl->hw, work, 0);
3441 }
3442
3443 /* Check if communication with the device works correctly. */
3444 static int b43_validate_chipaccess(struct b43_wldev *dev)
3445 {
3446         u32 v, backup0, backup4;
3447
3448         backup0 = b43_shm_read32(dev, B43_SHM_SHARED, 0);
3449         backup4 = b43_shm_read32(dev, B43_SHM_SHARED, 4);
3450
3451         /* Check for read/write and endianness problems. */
3452         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55);
3453         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55)
3454                 goto error;
3455         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA);
3456         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA)
3457                 goto error;
3458
3459         /* Check if unaligned 32bit SHM_SHARED access works properly.
3460          * However, don't bail out on failure, because it's noncritical. */
3461         b43_shm_write16(dev, B43_SHM_SHARED, 0, 0x1122);
3462         b43_shm_write16(dev, B43_SHM_SHARED, 2, 0x3344);
3463         b43_shm_write16(dev, B43_SHM_SHARED, 4, 0x5566);
3464         b43_shm_write16(dev, B43_SHM_SHARED, 6, 0x7788);
3465         if (b43_shm_read32(dev, B43_SHM_SHARED, 2) != 0x55663344)
3466                 b43warn(dev->wl, "Unaligned 32bit SHM read access is broken\n");
3467         b43_shm_write32(dev, B43_SHM_SHARED, 2, 0xAABBCCDD);
3468         if (b43_shm_read16(dev, B43_SHM_SHARED, 0) != 0x1122 ||
3469             b43_shm_read16(dev, B43_SHM_SHARED, 2) != 0xCCDD ||
3470             b43_shm_read16(dev, B43_SHM_SHARED, 4) != 0xAABB ||
3471             b43_shm_read16(dev, B43_SHM_SHARED, 6) != 0x7788)
3472                 b43warn(dev->wl, "Unaligned 32bit SHM write access is broken\n");
3473
3474         b43_shm_write32(dev, B43_SHM_SHARED, 0, backup0);
3475         b43_shm_write32(dev, B43_SHM_SHARED, 4, backup4);
3476
3477         if ((dev->dev->core_rev >= 3) && (dev->dev->core_rev <= 10)) {
3478                 /* The 32bit register shadows the two 16bit registers
3479                  * with update sideeffects. Validate this. */
3480                 b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA);
3481                 b43_write32(dev, B43_MMIO_TSF_CFP_START, 0xCCCCBBBB);
3482                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_LOW) != 0xBBBB)
3483                         goto error;
3484                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_HIGH) != 0xCCCC)
3485                         goto error;
3486         }
3487         b43_write32(dev, B43_MMIO_TSF_CFP_START, 0);
3488
3489         v = b43_read32(dev, B43_MMIO_MACCTL);
3490         v |= B43_MACCTL_GMODE;
3491         if (v != (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED))
3492                 goto error;
3493
3494         return 0;
3495 error:
3496         b43err(dev->wl, "Failed to validate the chipaccess\n");
3497         return -ENODEV;
3498 }
3499
3500 static void b43_security_init(struct b43_wldev *dev)
3501 {
3502         dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP);
3503         /* KTP is a word address, but we address SHM bytewise.
3504          * So multiply by two.
3505          */
3506         dev->ktp *= 2;
3507         /* Number of RCMTA address slots */
3508         b43_write16(dev, B43_MMIO_RCMTA_COUNT, B43_NR_PAIRWISE_KEYS);
3509         /* Clear the key memory. */
3510         b43_clear_keys(dev);
3511 }
3512
3513 #ifdef CONFIG_B43_HWRNG
3514 static int b43_rng_read(struct hwrng *rng, u32 *data)
3515 {
3516         struct b43_wl *wl = (struct b43_wl *)rng->priv;
3517         struct b43_wldev *dev;
3518         int count = -ENODEV;
3519
3520         mutex_lock(&wl->mutex);
3521         dev = wl->current_dev;
3522         if (likely(dev && b43_status(dev) >= B43_STAT_INITIALIZED)) {
3523                 *data = b43_read16(dev, B43_MMIO_RNG);
3524                 count = sizeof(u16);
3525         }
3526         mutex_unlock(&wl->mutex);
3527
3528         return count;
3529 }
3530 #endif /* CONFIG_B43_HWRNG */
3531
3532 static void b43_rng_exit(struct b43_wl *wl)
3533 {
3534 #ifdef CONFIG_B43_HWRNG
3535         if (wl->rng_initialized)
3536                 hwrng_unregister(&wl->rng);
3537 #endif /* CONFIG_B43_HWRNG */
3538 }
3539
3540 static int b43_rng_init(struct b43_wl *wl)
3541 {
3542         int err = 0;
3543
3544 #ifdef CONFIG_B43_HWRNG
3545         snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
3546                  "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
3547         wl->rng.name = wl->rng_name;
3548         wl->rng.data_read = b43_rng_read;
3549         wl->rng.priv = (unsigned long)wl;
3550         wl->rng_initialized = true;
3551         err = hwrng_register(&wl->rng);
3552         if (err) {
3553                 wl->rng_initialized = false;
3554                 b43err(wl, "Failed to register the random "
3555                        "number generator (%d)\n", err);
3556         }
3557 #endif /* CONFIG_B43_HWRNG */
3558
3559         return err;
3560 }
3561
3562 static void b43_tx_work(struct work_struct *work)
3563 {
3564         struct b43_wl *wl = container_of(work, struct b43_wl, tx_work);
3565         struct b43_wldev *dev;
3566         struct sk_buff *skb;
3567         int queue_num;
3568         int err = 0;
3569
3570         mutex_lock(&wl->mutex);
3571         dev = wl->current_dev;
3572         if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED)) {
3573                 mutex_unlock(&wl->mutex);
3574                 return;
3575         }
3576
3577         for (queue_num = 0; queue_num < B43_QOS_QUEUE_NUM; queue_num++) {
3578                 while (skb_queue_len(&wl->tx_queue[queue_num])) {
3579                         skb = skb_dequeue(&wl->tx_queue[queue_num]);
3580                         if (b43_using_pio_transfers(dev))
3581                                 err = b43_pio_tx(dev, skb);
3582                         else
3583                                 err = b43_dma_tx(dev, skb);
3584                         if (err == -ENOSPC) {
3585                                 wl->tx_queue_stopped[queue_num] = 1;
3586                                 ieee80211_stop_queue(wl->hw, queue_num);
3587                                 skb_queue_head(&wl->tx_queue[queue_num], skb);
3588                                 break;
3589                         }
3590                         if (unlikely(err))
3591                                 ieee80211_free_txskb(wl->hw, skb);
3592                         err = 0;
3593                 }
3594
3595                 if (!err)
3596                         wl->tx_queue_stopped[queue_num] = 0;
3597         }
3598
3599 #if B43_DEBUG
3600         dev->tx_count++;
3601 #endif
3602         mutex_unlock(&wl->mutex);
3603 }
3604
3605 static void b43_op_tx(struct ieee80211_hw *hw,
3606                       struct ieee80211_tx_control *control,
3607                       struct sk_buff *skb)
3608 {
3609         struct b43_wl *wl = hw_to_b43_wl(hw);
3610
3611         if (unlikely(skb->len < 2 + 2 + 6)) {
3612                 /* Too short, this can't be a valid frame. */
3613                 ieee80211_free_txskb(hw, skb);
3614                 return;
3615         }
3616         B43_WARN_ON(skb_shinfo(skb)->nr_frags);
3617
3618         skb_queue_tail(&wl->tx_queue[skb->queue_mapping], skb);
3619         if (!wl->tx_queue_stopped[skb->queue_mapping]) {
3620                 ieee80211_queue_work(wl->hw, &wl->tx_work);
3621         } else {
3622                 ieee80211_stop_queue(wl->hw, skb->queue_mapping);
3623         }
3624 }
3625
3626 static void b43_qos_params_upload(struct b43_wldev *dev,
3627                                   const struct ieee80211_tx_queue_params *p,
3628                                   u16 shm_offset)
3629 {
3630         u16 params[B43_NR_QOSPARAMS];
3631         int bslots, tmp;
3632         unsigned int i;
3633
3634         if (!dev->qos_enabled)
3635                 return;
3636
3637         bslots = b43_read16(dev, B43_MMIO_RNG) & p->cw_min;
3638
3639         memset(&params, 0, sizeof(params));
3640
3641         params[B43_QOSPARAM_TXOP] = p->txop * 32;
3642         params[B43_QOSPARAM_CWMIN] = p->cw_min;
3643         params[B43_QOSPARAM_CWMAX] = p->cw_max;
3644         params[B43_QOSPARAM_CWCUR] = p->cw_min;
3645         params[B43_QOSPARAM_AIFS] = p->aifs;
3646         params[B43_QOSPARAM_BSLOTS] = bslots;
3647         params[B43_QOSPARAM_REGGAP] = bslots + p->aifs;
3648
3649         for (i = 0; i < ARRAY_SIZE(params); i++) {
3650                 if (i == B43_QOSPARAM_STATUS) {
3651                         tmp = b43_shm_read16(dev, B43_SHM_SHARED,
3652                                              shm_offset + (i * 2));
3653                         /* Mark the parameters as updated. */
3654                         tmp |= 0x100;
3655                         b43_shm_write16(dev, B43_SHM_SHARED,
3656                                         shm_offset + (i * 2),
3657                                         tmp);
3658                 } else {
3659                         b43_shm_write16(dev, B43_SHM_SHARED,
3660                                         shm_offset + (i * 2),
3661                                         params[i]);
3662                 }
3663         }
3664 }
3665
3666 /* Mapping of mac80211 queue numbers to b43 QoS SHM offsets. */
3667 static const u16 b43_qos_shm_offsets[] = {
3668         /* [mac80211-queue-nr] = SHM_OFFSET, */
3669         [0] = B43_QOS_VOICE,
3670         [1] = B43_QOS_VIDEO,
3671         [2] = B43_QOS_BESTEFFORT,
3672         [3] = B43_QOS_BACKGROUND,
3673 };
3674
3675 /* Update all QOS parameters in hardware. */
3676 static void b43_qos_upload_all(struct b43_wldev *dev)
3677 {
3678         struct b43_wl *wl = dev->wl;
3679         struct b43_qos_params *params;
3680         unsigned int i;
3681
3682         if (!dev->qos_enabled)
3683                 return;
3684
3685         BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
3686                      ARRAY_SIZE(wl->qos_params));
3687
3688         b43_mac_suspend(dev);
3689         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
3690                 params = &(wl->qos_params[i]);
3691                 b43_qos_params_upload(dev, &(params->p),
3692                                       b43_qos_shm_offsets[i]);
3693         }
3694         b43_mac_enable(dev);
3695 }
3696
3697 static void b43_qos_clear(struct b43_wl *wl)
3698 {
3699         struct b43_qos_params *params;
3700         unsigned int i;
3701
3702         /* Initialize QoS parameters to sane defaults. */
3703
3704         BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
3705                      ARRAY_SIZE(wl->qos_params));
3706
3707         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
3708                 params = &(wl->qos_params[i]);
3709
3710                 switch (b43_qos_shm_offsets[i]) {
3711                 case B43_QOS_VOICE:
3712                         params->p.txop = 0;
3713                         params->p.aifs = 2;
3714                         params->p.cw_min = 0x0001;
3715                         params->p.cw_max = 0x0001;
3716                         break;
3717                 case B43_QOS_VIDEO:
3718                         params->p.txop = 0;
3719                         params->p.aifs = 2;
3720                         params->p.cw_min = 0x0001;
3721                         params->p.cw_max = 0x0001;
3722                         break;
3723                 case B43_QOS_BESTEFFORT:
3724                         params->p.txop = 0;
3725                         params->p.aifs = 3;
3726                         params->p.cw_min = 0x0001;
3727                         params->p.cw_max = 0x03FF;
3728                         break;
3729                 case B43_QOS_BACKGROUND:
3730                         params->p.txop = 0;
3731                         params->p.aifs = 7;
3732                         params->p.cw_min = 0x0001;
3733                         params->p.cw_max = 0x03FF;
3734                         break;
3735                 default:
3736                         B43_WARN_ON(1);
3737                 }
3738         }
3739 }
3740
3741 /* Initialize the core's QOS capabilities */
3742 static void b43_qos_init(struct b43_wldev *dev)
3743 {
3744         if (!dev->qos_enabled) {
3745                 /* Disable QOS support. */
3746                 b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_EDCF);
3747                 b43_write16(dev, B43_MMIO_IFSCTL,
3748                             b43_read16(dev, B43_MMIO_IFSCTL)
3749                             & ~B43_MMIO_IFSCTL_USE_EDCF);
3750                 b43dbg(dev->wl, "QoS disabled\n");
3751                 return;
3752         }
3753
3754         /* Upload the current QOS parameters. */
3755         b43_qos_upload_all(dev);
3756
3757         /* Enable QOS support. */
3758         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF);
3759         b43_write16(dev, B43_MMIO_IFSCTL,
3760                     b43_read16(dev, B43_MMIO_IFSCTL)
3761                     | B43_MMIO_IFSCTL_USE_EDCF);
3762         b43dbg(dev->wl, "QoS enabled\n");
3763 }
3764
3765 static int b43_op_conf_tx(struct ieee80211_hw *hw,
3766                           struct ieee80211_vif *vif, u16 _queue,
3767                           const struct ieee80211_tx_queue_params *params)
3768 {
3769         struct b43_wl *wl = hw_to_b43_wl(hw);
3770         struct b43_wldev *dev;
3771         unsigned int queue = (unsigned int)_queue;
3772         int err = -ENODEV;
3773
3774         if (queue >= ARRAY_SIZE(wl->qos_params)) {
3775                 /* Queue not available or don't support setting
3776                  * params on this queue. Return success to not
3777                  * confuse mac80211. */
3778                 return 0;
3779         }
3780         BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
3781                      ARRAY_SIZE(wl->qos_params));
3782
3783         mutex_lock(&wl->mutex);
3784         dev = wl->current_dev;
3785         if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED)))
3786                 goto out_unlock;
3787
3788         memcpy(&(wl->qos_params[queue].p), params, sizeof(*params));
3789         b43_mac_suspend(dev);
3790         b43_qos_params_upload(dev, &(wl->qos_params[queue].p),
3791                               b43_qos_shm_offsets[queue]);
3792         b43_mac_enable(dev);
3793         err = 0;
3794
3795 out_unlock:
3796         mutex_unlock(&wl->mutex);
3797
3798         return err;
3799 }
3800
3801 static int b43_op_get_stats(struct ieee80211_hw *hw,
3802                             struct ieee80211_low_level_stats *stats)
3803 {
3804         struct b43_wl *wl = hw_to_b43_wl(hw);
3805
3806         mutex_lock(&wl->mutex);
3807         memcpy(stats, &wl->ieee_stats, sizeof(*stats));
3808         mutex_unlock(&wl->mutex);
3809
3810         return 0;
3811 }
3812
3813 static u64 b43_op_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
3814 {
3815         struct b43_wl *wl = hw_to_b43_wl(hw);
3816         struct b43_wldev *dev;
3817         u64 tsf;
3818
3819         mutex_lock(&wl->mutex);
3820         dev = wl->current_dev;
3821
3822         if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED))
3823                 b43_tsf_read(dev, &tsf);
3824         else
3825                 tsf = 0;
3826
3827         mutex_unlock(&wl->mutex);
3828
3829         return tsf;
3830 }
3831
3832 static void b43_op_set_tsf(struct ieee80211_hw *hw,
3833                            struct ieee80211_vif *vif, u64 tsf)
3834 {
3835         struct b43_wl *wl = hw_to_b43_wl(hw);
3836         struct b43_wldev *dev;
3837
3838         mutex_lock(&wl->mutex);
3839         dev = wl->current_dev;
3840
3841         if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED))
3842                 b43_tsf_write(dev, tsf);
3843
3844         mutex_unlock(&wl->mutex);
3845 }
3846
3847 static const char *band_to_string(enum ieee80211_band band)
3848 {
3849         switch (band) {
3850         case IEEE80211_BAND_5GHZ:
3851                 return "5";
3852         case IEEE80211_BAND_2GHZ:
3853                 return "2.4";
3854         default:
3855                 break;
3856         }
3857         B43_WARN_ON(1);
3858         return "";
3859 }
3860
3861 /* Expects wl->mutex locked */
3862 static int b43_switch_band(struct b43_wldev *dev,
3863                            struct ieee80211_channel *chan)
3864 {
3865         struct b43_phy *phy = &dev->phy;
3866         bool gmode;
3867         u32 tmp;
3868
3869         switch (chan->band) {
3870         case IEEE80211_BAND_5GHZ:
3871                 gmode = false;
3872                 break;
3873         case IEEE80211_BAND_2GHZ:
3874                 gmode = true;
3875                 break;
3876         default:
3877                 B43_WARN_ON(1);
3878                 return -EINVAL;
3879         }
3880
3881         if (!((gmode && phy->supports_2ghz) ||
3882               (!gmode && phy->supports_5ghz))) {
3883                 b43err(dev->wl, "This device doesn't support %s-GHz band\n",
3884                        band_to_string(chan->band));
3885                 return -ENODEV;
3886         }
3887
3888         if (!!phy->gmode == !!gmode) {
3889                 /* This device is already running. */
3890                 return 0;
3891         }
3892
3893         b43dbg(dev->wl, "Switching to %s GHz band\n",
3894                band_to_string(chan->band));
3895
3896         /* Some new devices don't need disabling radio for band switching */
3897         if (!(phy->type == B43_PHYTYPE_N && phy->rev >= 3))
3898                 b43_software_rfkill(dev, true);
3899
3900         phy->gmode = gmode;
3901         b43_phy_put_into_reset(dev);
3902         switch (dev->dev->bus_type) {
3903 #ifdef CONFIG_B43_BCMA
3904         case B43_BUS_BCMA:
3905                 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
3906                 if (gmode)
3907                         tmp |= B43_BCMA_IOCTL_GMODE;
3908                 else
3909                         tmp &= ~B43_BCMA_IOCTL_GMODE;
3910                 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
3911                 break;
3912 #endif
3913 #ifdef CONFIG_B43_SSB
3914         case B43_BUS_SSB:
3915                 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
3916                 if (gmode)
3917                         tmp |= B43_TMSLOW_GMODE;
3918                 else
3919                         tmp &= ~B43_TMSLOW_GMODE;
3920                 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
3921                 break;
3922 #endif
3923         }
3924         b43_phy_take_out_of_reset(dev);
3925
3926         b43_upload_initvals_band(dev);
3927
3928         b43_phy_init(dev);
3929
3930         return 0;
3931 }
3932
3933 static void b43_set_beacon_listen_interval(struct b43_wldev *dev, u16 interval)
3934 {
3935         interval = min_t(u16, interval, (u16)0xFF);
3936         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BCN_LI, interval);
3937 }
3938
3939 /* Write the short and long frame retry limit values. */
3940 static void b43_set_retry_limits(struct b43_wldev *dev,
3941                                  unsigned int short_retry,
3942                                  unsigned int long_retry)
3943 {
3944         /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
3945          * the chip-internal counter. */
3946         short_retry = min(short_retry, (unsigned int)0xF);
3947         long_retry = min(long_retry, (unsigned int)0xF);
3948
3949         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT,
3950                         short_retry);
3951         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
3952                         long_retry);
3953 }
3954
3955 static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
3956 {
3957         struct b43_wl *wl = hw_to_b43_wl(hw);
3958         struct b43_wldev *dev = wl->current_dev;
3959         struct b43_phy *phy = &dev->phy;
3960         struct ieee80211_conf *conf = &hw->conf;
3961         int antenna;
3962         int err = 0;
3963
3964         mutex_lock(&wl->mutex);
3965         b43_mac_suspend(dev);
3966
3967         if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL)
3968                 b43_set_beacon_listen_interval(dev, conf->listen_interval);
3969
3970         if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
3971                 phy->chandef = &conf->chandef;
3972                 phy->channel = conf->chandef.chan->hw_value;
3973
3974                 /* Switch the band (if necessary). */
3975                 err = b43_switch_band(dev, conf->chandef.chan);
3976                 if (err)
3977                         goto out_mac_enable;
3978
3979                 /* Switch to the requested channel.
3980                  * The firmware takes care of races with the TX handler.
3981                  */
3982                 b43_switch_channel(dev, phy->channel);
3983         }
3984
3985         if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
3986                 b43_set_retry_limits(dev, conf->short_frame_max_tx_count,
3987                                           conf->long_frame_max_tx_count);
3988         changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS;
3989         if (!changed)
3990                 goto out_mac_enable;
3991
3992         dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR);
3993
3994         /* Adjust the desired TX power level. */
3995         if (conf->power_level != 0) {
3996                 if (conf->power_level != phy->desired_txpower) {
3997                         phy->desired_txpower = conf->power_level;
3998                         b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME |
3999                                                    B43_TXPWR_IGNORE_TSSI);
4000                 }
4001         }
4002
4003         /* Antennas for RX and management frame TX. */
4004         antenna = B43_ANTENNA_DEFAULT;
4005         b43_mgmtframe_txantenna(dev, antenna);
4006         antenna = B43_ANTENNA_DEFAULT;
4007         if (phy->ops->set_rx_antenna)
4008                 phy->ops->set_rx_antenna(dev, antenna);
4009
4010         if (wl->radio_enabled != phy->radio_on) {
4011                 if (wl->radio_enabled) {
4012                         b43_software_rfkill(dev, false);
4013                         b43info(dev->wl, "Radio turned on by software\n");
4014                         if (!dev->radio_hw_enable) {
4015                                 b43info(dev->wl, "The hardware RF-kill button "
4016                                         "still turns the radio physically off. "
4017                                         "Press the button to turn it on.\n");
4018                         }
4019                 } else {
4020                         b43_software_rfkill(dev, true);
4021                         b43info(dev->wl, "Radio turned off by software\n");
4022                 }
4023         }
4024
4025 out_mac_enable:
4026         b43_mac_enable(dev);
4027         mutex_unlock(&wl->mutex);
4028
4029         return err;
4030 }
4031
4032 static void b43_update_basic_rates(struct b43_wldev *dev, u32 brates)
4033 {
4034         struct ieee80211_supported_band *sband =
4035                 dev->wl->hw->wiphy->bands[b43_current_band(dev->wl)];
4036         struct ieee80211_rate *rate;
4037         int i;
4038         u16 basic, direct, offset, basic_offset, rateptr;
4039
4040         for (i = 0; i < sband->n_bitrates; i++) {
4041                 rate = &sband->bitrates[i];
4042
4043                 if (b43_is_cck_rate(rate->hw_value)) {
4044                         direct = B43_SHM_SH_CCKDIRECT;
4045                         basic = B43_SHM_SH_CCKBASIC;
4046                         offset = b43_plcp_get_ratecode_cck(rate->hw_value);
4047                         offset &= 0xF;
4048                 } else {
4049                         direct = B43_SHM_SH_OFDMDIRECT;
4050                         basic = B43_SHM_SH_OFDMBASIC;
4051                         offset = b43_plcp_get_ratecode_ofdm(rate->hw_value);
4052                         offset &= 0xF;
4053                 }
4054
4055                 rate = ieee80211_get_response_rate(sband, brates, rate->bitrate);
4056
4057                 if (b43_is_cck_rate(rate->hw_value)) {
4058                         basic_offset = b43_plcp_get_ratecode_cck(rate->hw_value);
4059                         basic_offset &= 0xF;
4060                 } else {
4061                         basic_offset = b43_plcp_get_ratecode_ofdm(rate->hw_value);
4062                         basic_offset &= 0xF;
4063                 }
4064
4065                 /*
4066                  * Get the pointer that we need to point to
4067                  * from the direct map
4068                  */
4069                 rateptr = b43_shm_read16(dev, B43_SHM_SHARED,
4070                                          direct + 2 * basic_offset);
4071                 /* and write it to the basic map */
4072                 b43_shm_write16(dev, B43_SHM_SHARED, basic + 2 * offset,
4073                                 rateptr);
4074         }
4075 }
4076
4077 static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
4078                                     struct ieee80211_vif *vif,
4079                                     struct ieee80211_bss_conf *conf,
4080                                     u32 changed)
4081 {
4082         struct b43_wl *wl = hw_to_b43_wl(hw);
4083         struct b43_wldev *dev;
4084
4085         mutex_lock(&wl->mutex);
4086
4087         dev = wl->current_dev;
4088         if (!dev || b43_status(dev) < B43_STAT_STARTED)
4089                 goto out_unlock_mutex;
4090
4091         B43_WARN_ON(wl->vif != vif);
4092
4093         if (changed & BSS_CHANGED_BSSID) {
4094                 if (conf->bssid)
4095                         memcpy(wl->bssid, conf->bssid, ETH_ALEN);
4096                 else
4097                         memset(wl->bssid, 0, ETH_ALEN);
4098         }
4099
4100         if (b43_status(dev) >= B43_STAT_INITIALIZED) {
4101                 if (changed & BSS_CHANGED_BEACON &&
4102                     (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
4103                      b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
4104                      b43_is_mode(wl, NL80211_IFTYPE_ADHOC)))
4105                         b43_update_templates(wl);
4106
4107                 if (changed & BSS_CHANGED_BSSID)
4108                         b43_write_mac_bssid_templates(dev);
4109         }
4110
4111         b43_mac_suspend(dev);
4112
4113         /* Update templates for AP/mesh mode. */
4114         if (changed & BSS_CHANGED_BEACON_INT &&
4115             (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
4116              b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
4117              b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) &&
4118             conf->beacon_int)
4119                 b43_set_beacon_int(dev, conf->beacon_int);
4120
4121         if (changed & BSS_CHANGED_BASIC_RATES)
4122                 b43_update_basic_rates(dev, conf->basic_rates);
4123
4124         if (changed & BSS_CHANGED_ERP_SLOT) {
4125                 if (conf->use_short_slot)
4126                         b43_short_slot_timing_enable(dev);
4127                 else
4128                         b43_short_slot_timing_disable(dev);
4129         }
4130
4131         b43_mac_enable(dev);
4132 out_unlock_mutex:
4133         mutex_unlock(&wl->mutex);
4134 }
4135
4136 static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
4137                           struct ieee80211_vif *vif, struct ieee80211_sta *sta,
4138                           struct ieee80211_key_conf *key)
4139 {
4140         struct b43_wl *wl = hw_to_b43_wl(hw);
4141         struct b43_wldev *dev;
4142         u8 algorithm;
4143         u8 index;
4144         int err;
4145         static const u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
4146
4147         if (modparam_nohwcrypt)
4148                 return -ENOSPC; /* User disabled HW-crypto */
4149
4150         if ((vif->type == NL80211_IFTYPE_ADHOC ||
4151              vif->type == NL80211_IFTYPE_MESH_POINT) &&
4152             (key->cipher == WLAN_CIPHER_SUITE_TKIP ||
4153              key->cipher == WLAN_CIPHER_SUITE_CCMP) &&
4154             !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
4155                 /*
4156                  * For now, disable hw crypto for the RSN IBSS group keys. This
4157                  * could be optimized in the future, but until that gets
4158                  * implemented, use of software crypto for group addressed
4159                  * frames is a acceptable to allow RSN IBSS to be used.
4160                  */
4161                 return -EOPNOTSUPP;
4162         }
4163
4164         mutex_lock(&wl->mutex);
4165
4166         dev = wl->current_dev;
4167         err = -ENODEV;
4168         if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
4169                 goto out_unlock;
4170
4171         if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) {
4172                 /* We don't have firmware for the crypto engine.
4173                  * Must use software-crypto. */
4174                 err = -EOPNOTSUPP;
4175                 goto out_unlock;
4176         }
4177
4178         err = -EINVAL;
4179         switch (key->cipher) {
4180         case WLAN_CIPHER_SUITE_WEP40:
4181                 algorithm = B43_SEC_ALGO_WEP40;
4182                 break;
4183         case WLAN_CIPHER_SUITE_WEP104:
4184                 algorithm = B43_SEC_ALGO_WEP104;
4185                 break;
4186         case WLAN_CIPHER_SUITE_TKIP:
4187                 algorithm = B43_SEC_ALGO_TKIP;
4188                 break;
4189         case WLAN_CIPHER_SUITE_CCMP:
4190                 algorithm = B43_SEC_ALGO_AES;
4191                 break;
4192         default:
4193                 B43_WARN_ON(1);
4194                 goto out_unlock;
4195         }
4196         index = (u8) (key->keyidx);
4197         if (index > 3)
4198                 goto out_unlock;
4199
4200         switch (cmd) {
4201         case SET_KEY:
4202                 if (algorithm == B43_SEC_ALGO_TKIP &&
4203                     (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE) ||
4204                     !modparam_hwtkip)) {
4205                         /* We support only pairwise key */
4206                         err = -EOPNOTSUPP;
4207                         goto out_unlock;
4208                 }
4209
4210                 if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
4211                         if (WARN_ON(!sta)) {
4212                                 err = -EOPNOTSUPP;
4213                                 goto out_unlock;
4214                         }
4215                         /* Pairwise key with an assigned MAC address. */
4216                         err = b43_key_write(dev, -1, algorithm,
4217                                             key->key, key->keylen,
4218                                             sta->addr, key);
4219                 } else {
4220                         /* Group key */
4221                         err = b43_key_write(dev, index, algorithm,
4222                                             key->key, key->keylen, NULL, key);
4223                 }
4224                 if (err)
4225                         goto out_unlock;
4226
4227                 if (algorithm == B43_SEC_ALGO_WEP40 ||
4228                     algorithm == B43_SEC_ALGO_WEP104) {
4229                         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_USEDEFKEYS);
4230                 } else {
4231                         b43_hf_write(dev,
4232                                      b43_hf_read(dev) & ~B43_HF_USEDEFKEYS);
4233                 }
4234                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
4235                 if (algorithm == B43_SEC_ALGO_TKIP)
4236                         key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
4237                 break;
4238         case DISABLE_KEY: {
4239                 err = b43_key_clear(dev, key->hw_key_idx);
4240                 if (err)
4241                         goto out_unlock;
4242                 break;
4243         }
4244         default:
4245                 B43_WARN_ON(1);
4246         }
4247
4248 out_unlock:
4249         if (!err) {
4250                 b43dbg(wl, "%s hardware based encryption for keyidx: %d, "
4251                        "mac: %pM\n",
4252                        cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
4253                        sta ? sta->addr : bcast_addr);
4254                 b43_dump_keymemory(dev);
4255         }
4256         mutex_unlock(&wl->mutex);
4257
4258         return err;
4259 }
4260
4261 static void b43_op_configure_filter(struct ieee80211_hw *hw,
4262                                     unsigned int changed, unsigned int *fflags,
4263                                     u64 multicast)
4264 {
4265         struct b43_wl *wl = hw_to_b43_wl(hw);
4266         struct b43_wldev *dev;
4267
4268         mutex_lock(&wl->mutex);
4269         dev = wl->current_dev;
4270         if (!dev) {
4271                 *fflags = 0;
4272                 goto out_unlock;
4273         }
4274
4275         *fflags &= FIF_PROMISC_IN_BSS |
4276                   FIF_ALLMULTI |
4277                   FIF_FCSFAIL |
4278                   FIF_PLCPFAIL |
4279                   FIF_CONTROL |
4280                   FIF_OTHER_BSS |
4281                   FIF_BCN_PRBRESP_PROMISC;
4282
4283         changed &= FIF_PROMISC_IN_BSS |
4284                    FIF_ALLMULTI |
4285                    FIF_FCSFAIL |
4286                    FIF_PLCPFAIL |
4287                    FIF_CONTROL |
4288                    FIF_OTHER_BSS |
4289                    FIF_BCN_PRBRESP_PROMISC;
4290
4291         wl->filter_flags = *fflags;
4292
4293         if (changed && b43_status(dev) >= B43_STAT_INITIALIZED)
4294                 b43_adjust_opmode(dev);
4295
4296 out_unlock:
4297         mutex_unlock(&wl->mutex);
4298 }
4299
4300 /* Locking: wl->mutex
4301  * Returns the current dev. This might be different from the passed in dev,
4302  * because the core might be gone away while we unlocked the mutex. */
4303 static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev)
4304 {
4305         struct b43_wl *wl;
4306         struct b43_wldev *orig_dev;
4307         u32 mask;
4308         int queue_num;
4309
4310         if (!dev)
4311                 return NULL;
4312         wl = dev->wl;
4313 redo:
4314         if (!dev || b43_status(dev) < B43_STAT_STARTED)
4315                 return dev;
4316
4317         /* Cancel work. Unlock to avoid deadlocks. */
4318         mutex_unlock(&wl->mutex);
4319         cancel_delayed_work_sync(&dev->periodic_work);
4320         cancel_work_sync(&wl->tx_work);
4321         mutex_lock(&wl->mutex);
4322         dev = wl->current_dev;
4323         if (!dev || b43_status(dev) < B43_STAT_STARTED) {
4324                 /* Whoops, aliens ate up the device while we were unlocked. */
4325                 return dev;
4326         }
4327
4328         /* Disable interrupts on the device. */
4329         b43_set_status(dev, B43_STAT_INITIALIZED);
4330         if (b43_bus_host_is_sdio(dev->dev)) {
4331                 /* wl->mutex is locked. That is enough. */
4332                 b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
4333                 b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
4334         } else {
4335                 spin_lock_irq(&wl->hardirq_lock);
4336                 b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
4337                 b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
4338                 spin_unlock_irq(&wl->hardirq_lock);
4339         }
4340         /* Synchronize and free the interrupt handlers. Unlock to avoid deadlocks. */
4341         orig_dev = dev;
4342         mutex_unlock(&wl->mutex);
4343         if (b43_bus_host_is_sdio(dev->dev)) {
4344                 b43_sdio_free_irq(dev);
4345         } else {
4346                 synchronize_irq(dev->dev->irq);
4347                 free_irq(dev->dev->irq, dev);
4348         }
4349         mutex_lock(&wl->mutex);
4350         dev = wl->current_dev;
4351         if (!dev)
4352                 return dev;
4353         if (dev != orig_dev) {
4354                 if (b43_status(dev) >= B43_STAT_STARTED)
4355                         goto redo;
4356                 return dev;
4357         }
4358         mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
4359         B43_WARN_ON(mask != 0xFFFFFFFF && mask);
4360
4361         /* Drain all TX queues. */
4362         for (queue_num = 0; queue_num < B43_QOS_QUEUE_NUM; queue_num++) {
4363                 while (skb_queue_len(&wl->tx_queue[queue_num])) {
4364                         struct sk_buff *skb;
4365
4366                         skb = skb_dequeue(&wl->tx_queue[queue_num]);
4367                         ieee80211_free_txskb(wl->hw, skb);
4368                 }
4369         }
4370
4371         b43_mac_suspend(dev);
4372         b43_leds_exit(dev);
4373         b43dbg(wl, "Wireless interface stopped\n");
4374
4375         return dev;
4376 }
4377
4378 /* Locking: wl->mutex */
4379 static int b43_wireless_core_start(struct b43_wldev *dev)
4380 {
4381         int err;
4382
4383         B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
4384
4385         drain_txstatus_queue(dev);
4386         if (b43_bus_host_is_sdio(dev->dev)) {
4387                 err = b43_sdio_request_irq(dev, b43_sdio_interrupt_handler);
4388                 if (err) {
4389                         b43err(dev->wl, "Cannot request SDIO IRQ\n");
4390                         goto out;
4391                 }
4392         } else {
4393                 err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
4394                                            b43_interrupt_thread_handler,
4395                                            IRQF_SHARED, KBUILD_MODNAME, dev);
4396                 if (err) {
4397                         b43err(dev->wl, "Cannot request IRQ-%d\n",
4398                                dev->dev->irq);
4399                         goto out;
4400                 }
4401         }
4402
4403         /* We are ready to run. */
4404         ieee80211_wake_queues(dev->wl->hw);
4405         b43_set_status(dev, B43_STAT_STARTED);
4406
4407         /* Start data flow (TX/RX). */
4408         b43_mac_enable(dev);
4409         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
4410
4411         /* Start maintenance work */
4412         b43_periodic_tasks_setup(dev);
4413
4414         b43_leds_init(dev);
4415
4416         b43dbg(dev->wl, "Wireless interface started\n");
4417 out:
4418         return err;
4419 }
4420
4421 static char *b43_phy_name(struct b43_wldev *dev, u8 phy_type)
4422 {
4423         switch (phy_type) {
4424         case B43_PHYTYPE_A:
4425                 return "A";
4426         case B43_PHYTYPE_B:
4427                 return "B";
4428         case B43_PHYTYPE_G:
4429                 return "G";
4430         case B43_PHYTYPE_N:
4431                 return "N";
4432         case B43_PHYTYPE_LP:
4433                 return "LP";
4434         case B43_PHYTYPE_SSLPN:
4435                 return "SSLPN";
4436         case B43_PHYTYPE_HT:
4437                 return "HT";
4438         case B43_PHYTYPE_LCN:
4439                 return "LCN";
4440         case B43_PHYTYPE_LCNXN:
4441                 return "LCNXN";
4442         case B43_PHYTYPE_LCN40:
4443                 return "LCN40";
4444         case B43_PHYTYPE_AC:
4445                 return "AC";
4446         }
4447         return "UNKNOWN";
4448 }
4449
4450 /* Get PHY and RADIO versioning numbers */
4451 static int b43_phy_versioning(struct b43_wldev *dev)
4452 {
4453         struct b43_phy *phy = &dev->phy;
4454         const u8 core_rev = dev->dev->core_rev;
4455         u32 tmp;
4456         u8 analog_type;
4457         u8 phy_type;
4458         u8 phy_rev;
4459         u16 radio_manuf;
4460         u16 radio_id;
4461         u16 radio_rev;
4462         u8 radio_ver;
4463         int unsupported = 0;
4464
4465         /* Get PHY versioning */
4466         tmp = b43_read16(dev, B43_MMIO_PHY_VER);
4467         analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT;
4468         phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT;
4469         phy_rev = (tmp & B43_PHYVER_VERSION);
4470
4471         /* LCNXN is continuation of N which run out of revisions */
4472         if (phy_type == B43_PHYTYPE_LCNXN) {
4473                 phy_type = B43_PHYTYPE_N;
4474                 phy_rev += 16;
4475         }
4476
4477         switch (phy_type) {
4478 #ifdef CONFIG_B43_PHY_G
4479         case B43_PHYTYPE_G:
4480                 if (phy_rev > 9)
4481                         unsupported = 1;
4482                 break;
4483 #endif
4484 #ifdef CONFIG_B43_PHY_N
4485         case B43_PHYTYPE_N:
4486                 if (phy_rev >= 19)
4487                         unsupported = 1;
4488                 break;
4489 #endif
4490 #ifdef CONFIG_B43_PHY_LP
4491         case B43_PHYTYPE_LP:
4492                 if (phy_rev > 2)
4493                         unsupported = 1;
4494                 break;
4495 #endif
4496 #ifdef CONFIG_B43_PHY_HT
4497         case B43_PHYTYPE_HT:
4498                 if (phy_rev > 1)
4499                         unsupported = 1;
4500                 break;
4501 #endif
4502 #ifdef CONFIG_B43_PHY_LCN
4503         case B43_PHYTYPE_LCN:
4504                 if (phy_rev > 1)
4505                         unsupported = 1;
4506                 break;
4507 #endif
4508         default:
4509                 unsupported = 1;
4510         }
4511         if (unsupported) {
4512                 b43err(dev->wl, "FOUND UNSUPPORTED PHY (Analog %u, Type %d (%s), Revision %u)\n",
4513                        analog_type, phy_type, b43_phy_name(dev, phy_type),
4514                        phy_rev);
4515                 return -EOPNOTSUPP;
4516         }
4517         b43info(dev->wl, "Found PHY: Analog %u, Type %d (%s), Revision %u\n",
4518                 analog_type, phy_type, b43_phy_name(dev, phy_type), phy_rev);
4519
4520         /* Get RADIO versioning */
4521         if (core_rev == 40 || core_rev == 42) {
4522                 radio_manuf = 0x17F;
4523
4524                 b43_write16f(dev, B43_MMIO_RADIO24_CONTROL, 0);
4525                 radio_rev = b43_read16(dev, B43_MMIO_RADIO24_DATA);
4526
4527                 b43_write16f(dev, B43_MMIO_RADIO24_CONTROL, 1);
4528                 radio_id = b43_read16(dev, B43_MMIO_RADIO24_DATA);
4529
4530                 radio_ver = 0; /* Is there version somewhere? */
4531         } else if (core_rev >= 24) {
4532                 u16 radio24[3];
4533
4534                 for (tmp = 0; tmp < 3; tmp++) {
4535                         b43_write16f(dev, B43_MMIO_RADIO24_CONTROL, tmp);
4536                         radio24[tmp] = b43_read16(dev, B43_MMIO_RADIO24_DATA);
4537                 }
4538
4539                 radio_manuf = 0x17F;
4540                 radio_id = (radio24[2] << 8) | radio24[1];
4541                 radio_rev = (radio24[0] & 0xF);
4542                 radio_ver = (radio24[0] & 0xF0) >> 4;
4543         } else {
4544                 if (dev->dev->chip_id == 0x4317) {
4545                         if (dev->dev->chip_rev == 0)
4546                                 tmp = 0x3205017F;
4547                         else if (dev->dev->chip_rev == 1)
4548                                 tmp = 0x4205017F;
4549                         else
4550                                 tmp = 0x5205017F;
4551                 } else {
4552                         b43_write16f(dev, B43_MMIO_RADIO_CONTROL,
4553                                      B43_RADIOCTL_ID);
4554                         tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
4555                         b43_write16f(dev, B43_MMIO_RADIO_CONTROL,
4556                                      B43_RADIOCTL_ID);
4557                         tmp |= b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) << 16;
4558                 }
4559                 radio_manuf = (tmp & 0x00000FFF);
4560                 radio_id = (tmp & 0x0FFFF000) >> 12;
4561                 radio_rev = (tmp & 0xF0000000) >> 28;
4562                 radio_ver = 0; /* Probably not available on old hw */
4563         }
4564
4565         if (radio_manuf != 0x17F /* Broadcom */)
4566                 unsupported = 1;
4567         switch (phy_type) {
4568         case B43_PHYTYPE_A:
4569                 if (radio_id != 0x2060)
4570                         unsupported = 1;
4571                 if (radio_rev != 1)
4572                         unsupported = 1;
4573                 if (radio_manuf != 0x17F)
4574                         unsupported = 1;
4575                 break;
4576         case B43_PHYTYPE_B:
4577                 if ((radio_id & 0xFFF0) != 0x2050)
4578                         unsupported = 1;
4579                 break;
4580         case B43_PHYTYPE_G:
4581                 if (radio_id != 0x2050)
4582                         unsupported = 1;
4583                 break;
4584         case B43_PHYTYPE_N:
4585                 if (radio_id != 0x2055 && radio_id != 0x2056 &&
4586                     radio_id != 0x2057)
4587                         unsupported = 1;
4588                 if (radio_id == 0x2057 &&
4589                     !(radio_rev == 9 || radio_rev == 14))
4590                         unsupported = 1;
4591                 break;
4592         case B43_PHYTYPE_LP:
4593                 if (radio_id != 0x2062 && radio_id != 0x2063)
4594                         unsupported = 1;
4595                 break;
4596         case B43_PHYTYPE_HT:
4597                 if (radio_id != 0x2059)
4598                         unsupported = 1;
4599                 break;
4600         case B43_PHYTYPE_LCN:
4601                 if (radio_id != 0x2064)
4602                         unsupported = 1;
4603                 break;
4604         default:
4605                 B43_WARN_ON(1);
4606         }
4607         if (unsupported) {
4608                 b43err(dev->wl,
4609                        "FOUND UNSUPPORTED RADIO (Manuf 0x%X, ID 0x%X, Revision %u, Version %u)\n",
4610                        radio_manuf, radio_id, radio_rev, radio_ver);
4611                 return -EOPNOTSUPP;
4612         }
4613         b43info(dev->wl,
4614                 "Found Radio: Manuf 0x%X, ID 0x%X, Revision %u, Version %u\n",
4615                 radio_manuf, radio_id, radio_rev, radio_ver);
4616
4617         /* FIXME: b43 treats "id" as "ver" and ignores the real "ver" */
4618         phy->radio_manuf = radio_manuf;
4619         phy->radio_ver = radio_id;
4620         phy->radio_rev = radio_rev;
4621
4622         phy->analog = analog_type;
4623         phy->type = phy_type;
4624         phy->rev = phy_rev;
4625
4626         return 0;
4627 }
4628
4629 static void setup_struct_phy_for_init(struct b43_wldev *dev,
4630                                       struct b43_phy *phy)
4631 {
4632         phy->hardware_power_control = !!modparam_hwpctl;
4633         phy->next_txpwr_check_time = jiffies;
4634         /* PHY TX errors counter. */
4635         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
4636
4637 #if B43_DEBUG
4638         phy->phy_locked = false;
4639         phy->radio_locked = false;
4640 #endif
4641 }
4642
4643 static void setup_struct_wldev_for_init(struct b43_wldev *dev)
4644 {
4645         dev->dfq_valid = false;
4646
4647         /* Assume the radio is enabled. If it's not enabled, the state will
4648          * immediately get fixed on the first periodic work run. */
4649         dev->radio_hw_enable = true;
4650
4651         /* Stats */
4652         memset(&dev->stats, 0, sizeof(dev->stats));
4653
4654         setup_struct_phy_for_init(dev, &dev->phy);
4655
4656         /* IRQ related flags */
4657         dev->irq_reason = 0;
4658         memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
4659         dev->irq_mask = B43_IRQ_MASKTEMPLATE;
4660         if (b43_modparam_verbose < B43_VERBOSITY_DEBUG)
4661                 dev->irq_mask &= ~B43_IRQ_PHY_TXERR;
4662
4663         dev->mac_suspended = 1;
4664
4665         /* Noise calculation context */
4666         memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
4667 }
4668
4669 static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
4670 {
4671         struct ssb_sprom *sprom = dev->dev->bus_sprom;
4672         u64 hf;
4673
4674         if (!modparam_btcoex)
4675                 return;
4676         if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST))
4677                 return;
4678         if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode)
4679                 return;
4680
4681         hf = b43_hf_read(dev);
4682         if (sprom->boardflags_lo & B43_BFL_BTCMOD)
4683                 hf |= B43_HF_BTCOEXALT;
4684         else
4685                 hf |= B43_HF_BTCOEX;
4686         b43_hf_write(dev, hf);
4687 }
4688
4689 static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
4690 {
4691         if (!modparam_btcoex)
4692                 return;
4693         //TODO
4694 }
4695
4696 static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
4697 {
4698         struct ssb_bus *bus;
4699         u32 tmp;
4700
4701 #ifdef CONFIG_B43_SSB
4702         if (dev->dev->bus_type != B43_BUS_SSB)
4703                 return;
4704 #else
4705         return;
4706 #endif
4707
4708         bus = dev->dev->sdev->bus;
4709
4710         if ((bus->chip_id == 0x4311 && bus->chip_rev == 2) ||
4711             (bus->chip_id == 0x4312)) {
4712                 tmp = ssb_read32(dev->dev->sdev, SSB_IMCFGLO);
4713                 tmp &= ~SSB_IMCFGLO_REQTO;
4714                 tmp &= ~SSB_IMCFGLO_SERTO;
4715                 tmp |= 0x3;
4716                 ssb_write32(dev->dev->sdev, SSB_IMCFGLO, tmp);
4717                 ssb_commit_settings(bus);
4718         }
4719 }
4720
4721 static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
4722 {
4723         u16 pu_delay;
4724
4725         /* The time value is in microseconds. */
4726         if (dev->phy.type == B43_PHYTYPE_A)
4727                 pu_delay = 3700;
4728         else
4729                 pu_delay = 1050;
4730         if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle)
4731                 pu_delay = 500;
4732         if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8))
4733                 pu_delay = max(pu_delay, (u16)2400);
4734
4735         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SPUWKUP, pu_delay);
4736 }
4737
4738 /* Set the TSF CFP pre-TargetBeaconTransmissionTime. */
4739 static void b43_set_pretbtt(struct b43_wldev *dev)
4740 {
4741         u16 pretbtt;
4742
4743         /* The time value is in microseconds. */
4744         if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) {
4745                 pretbtt = 2;
4746         } else {
4747                 if (dev->phy.type == B43_PHYTYPE_A)
4748                         pretbtt = 120;
4749                 else
4750                         pretbtt = 250;
4751         }
4752         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRETBTT, pretbtt);
4753         b43_write16(dev, B43_MMIO_TSF_CFP_PRETBTT, pretbtt);
4754 }
4755
4756 /* Shutdown a wireless core */
4757 /* Locking: wl->mutex */
4758 static void b43_wireless_core_exit(struct b43_wldev *dev)
4759 {
4760         B43_WARN_ON(dev && b43_status(dev) > B43_STAT_INITIALIZED);
4761         if (!dev || b43_status(dev) != B43_STAT_INITIALIZED)
4762                 return;
4763
4764         b43_set_status(dev, B43_STAT_UNINIT);
4765
4766         /* Stop the microcode PSM. */
4767         b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PSM_RUN,
4768                       B43_MACCTL_PSM_JMP0);
4769
4770         switch (dev->dev->bus_type) {
4771 #ifdef CONFIG_B43_BCMA
4772         case B43_BUS_BCMA:
4773                 bcma_core_pci_down(dev->dev->bdev->bus);
4774                 break;
4775 #endif
4776 #ifdef CONFIG_B43_SSB
4777         case B43_BUS_SSB:
4778                 /* TODO */
4779                 break;
4780 #endif
4781         }
4782
4783         b43_dma_free(dev);
4784         b43_pio_free(dev);
4785         b43_chip_exit(dev);
4786         dev->phy.ops->switch_analog(dev, 0);
4787         if (dev->wl->current_beacon) {
4788                 dev_kfree_skb_any(dev->wl->current_beacon);
4789                 dev->wl->current_beacon = NULL;
4790         }
4791
4792         b43_device_disable(dev, 0);
4793         b43_bus_may_powerdown(dev);
4794 }
4795
4796 /* Initialize a wireless core */
4797 static int b43_wireless_core_init(struct b43_wldev *dev)
4798 {
4799         struct ssb_sprom *sprom = dev->dev->bus_sprom;
4800         struct b43_phy *phy = &dev->phy;
4801         int err;
4802         u64 hf;
4803
4804         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
4805
4806         err = b43_bus_powerup(dev, 0);
4807         if (err)
4808                 goto out;
4809         if (!b43_device_is_enabled(dev))
4810                 b43_wireless_core_reset(dev, phy->gmode);
4811
4812         /* Reset all data structures. */
4813         setup_struct_wldev_for_init(dev);
4814         phy->ops->prepare_structs(dev);
4815
4816         /* Enable IRQ routing to this device. */
4817         switch (dev->dev->bus_type) {
4818 #ifdef CONFIG_B43_BCMA
4819         case B43_BUS_BCMA:
4820                 bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
4821                                       dev->dev->bdev, true);
4822                 bcma_core_pci_up(dev->dev->bdev->bus);
4823                 break;
4824 #endif
4825 #ifdef CONFIG_B43_SSB
4826         case B43_BUS_SSB:
4827                 ssb_pcicore_dev_irqvecs_enable(&dev->dev->sdev->bus->pcicore,
4828                                                dev->dev->sdev);
4829                 break;
4830 #endif
4831         }
4832
4833         b43_imcfglo_timeouts_workaround(dev);
4834         b43_bluetooth_coext_disable(dev);
4835         if (phy->ops->prepare_hardware) {
4836                 err = phy->ops->prepare_hardware(dev);
4837                 if (err)
4838                         goto err_busdown;
4839         }
4840         err = b43_chip_init(dev);
4841         if (err)
4842                 goto err_busdown;
4843         b43_shm_write16(dev, B43_SHM_SHARED,
4844                         B43_SHM_SH_WLCOREREV, dev->dev->core_rev);
4845         hf = b43_hf_read(dev);
4846         if (phy->type == B43_PHYTYPE_G) {
4847                 hf |= B43_HF_SYMW;
4848                 if (phy->rev == 1)
4849                         hf |= B43_HF_GDCW;
4850                 if (sprom->boardflags_lo & B43_BFL_PACTRL)
4851                         hf |= B43_HF_OFDMPABOOST;
4852         }
4853         if (phy->radio_ver == 0x2050) {
4854                 if (phy->radio_rev == 6)
4855                         hf |= B43_HF_4318TSSI;
4856                 if (phy->radio_rev < 6)
4857                         hf |= B43_HF_VCORECALC;
4858         }
4859         if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
4860                 hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
4861 #if defined(CONFIG_B43_SSB) && defined(CONFIG_SSB_DRIVER_PCICORE)
4862         if (dev->dev->bus_type == B43_BUS_SSB &&
4863             dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
4864             dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
4865                 hf |= B43_HF_PCISCW; /* PCI slow clock workaround. */
4866 #endif
4867         hf &= ~B43_HF_SKCFPUP;
4868         b43_hf_write(dev, hf);
4869
4870         /* tell the ucode MAC capabilities */
4871         if (dev->dev->core_rev >= 13) {
4872                 u32 mac_hw_cap = b43_read32(dev, B43_MMIO_MAC_HW_CAP);
4873
4874                 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_MACHW_L,
4875                                 mac_hw_cap & 0xffff);
4876                 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_MACHW_H,
4877                                 (mac_hw_cap >> 16) & 0xffff);
4878         }
4879
4880         b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT,
4881                              B43_DEFAULT_LONG_RETRY_LIMIT);
4882         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SFFBLIM, 3);
4883         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_LFFBLIM, 2);
4884
4885         /* Disable sending probe responses from firmware.
4886          * Setting the MaxTime to one usec will always trigger
4887          * a timeout, so we never send any probe resp.
4888          * A timeout of zero is infinite. */
4889         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1);
4890
4891         b43_rate_memory_init(dev);
4892         b43_set_phytxctl_defaults(dev);
4893
4894         /* Minimum Contention Window */
4895         if (phy->type == B43_PHYTYPE_B)
4896                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F);
4897         else
4898                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF);
4899         /* Maximum Contention Window */
4900         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
4901
4902         /* write phytype and phyvers */
4903         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PHYTYPE, phy->type);
4904         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PHYVER, phy->rev);
4905
4906         if (b43_bus_host_is_pcmcia(dev->dev) ||
4907             b43_bus_host_is_sdio(dev->dev)) {
4908                 dev->__using_pio_transfers = true;
4909                 err = b43_pio_init(dev);
4910         } else if (dev->use_pio) {
4911                 b43warn(dev->wl, "Forced PIO by use_pio module parameter. "
4912                         "This should not be needed and will result in lower "
4913                         "performance.\n");
4914                 dev->__using_pio_transfers = true;
4915                 err = b43_pio_init(dev);
4916         } else {
4917                 dev->__using_pio_transfers = false;
4918                 err = b43_dma_init(dev);
4919         }
4920         if (err)
4921                 goto err_chip_exit;
4922         b43_qos_init(dev);
4923         b43_set_synth_pu_delay(dev, 1);
4924         b43_bluetooth_coext_enable(dev);
4925
4926         b43_bus_powerup(dev, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
4927         b43_upload_card_macaddress(dev);
4928         b43_security_init(dev);
4929
4930         ieee80211_wake_queues(dev->wl->hw);
4931
4932         b43_set_status(dev, B43_STAT_INITIALIZED);
4933
4934 out:
4935         return err;
4936
4937 err_chip_exit:
4938         b43_chip_exit(dev);
4939 err_busdown:
4940         b43_bus_may_powerdown(dev);
4941         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
4942         return err;
4943 }
4944
4945 static int b43_op_add_interface(struct ieee80211_hw *hw,
4946                                 struct ieee80211_vif *vif)
4947 {
4948         struct b43_wl *wl = hw_to_b43_wl(hw);
4949         struct b43_wldev *dev;
4950         int err = -EOPNOTSUPP;
4951
4952         /* TODO: allow WDS/AP devices to coexist */
4953
4954         if (vif->type != NL80211_IFTYPE_AP &&
4955             vif->type != NL80211_IFTYPE_MESH_POINT &&
4956             vif->type != NL80211_IFTYPE_STATION &&
4957             vif->type != NL80211_IFTYPE_WDS &&
4958             vif->type != NL80211_IFTYPE_ADHOC)
4959                 return -EOPNOTSUPP;
4960
4961         mutex_lock(&wl->mutex);
4962         if (wl->operating)
4963                 goto out_mutex_unlock;
4964
4965         b43dbg(wl, "Adding Interface type %d\n", vif->type);
4966
4967         dev = wl->current_dev;
4968         wl->operating = true;
4969         wl->vif = vif;
4970         wl->if_type = vif->type;
4971         memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
4972
4973         b43_adjust_opmode(dev);
4974         b43_set_pretbtt(dev);
4975         b43_set_synth_pu_delay(dev, 0);
4976         b43_upload_card_macaddress(dev);
4977
4978         err = 0;
4979  out_mutex_unlock:
4980         mutex_unlock(&wl->mutex);
4981
4982         if (err == 0)
4983                 b43_op_bss_info_changed(hw, vif, &vif->bss_conf, ~0);
4984
4985         return err;
4986 }
4987
4988 static void b43_op_remove_interface(struct ieee80211_hw *hw,
4989                                     struct ieee80211_vif *vif)
4990 {
4991         struct b43_wl *wl = hw_to_b43_wl(hw);
4992         struct b43_wldev *dev = wl->current_dev;
4993
4994         b43dbg(wl, "Removing Interface type %d\n", vif->type);
4995
4996         mutex_lock(&wl->mutex);
4997
4998         B43_WARN_ON(!wl->operating);
4999         B43_WARN_ON(wl->vif != vif);
5000         wl->vif = NULL;
5001
5002         wl->operating = false;
5003
5004         b43_adjust_opmode(dev);
5005         memset(wl->mac_addr, 0, ETH_ALEN);
5006         b43_upload_card_macaddress(dev);
5007
5008         mutex_unlock(&wl->mutex);
5009 }
5010
5011 static int b43_op_start(struct ieee80211_hw *hw)
5012 {
5013         struct b43_wl *wl = hw_to_b43_wl(hw);
5014         struct b43_wldev *dev = wl->current_dev;
5015         int did_init = 0;
5016         int err = 0;
5017
5018         /* Kill all old instance specific information to make sure
5019          * the card won't use it in the short timeframe between start
5020          * and mac80211 reconfiguring it. */
5021         memset(wl->bssid, 0, ETH_ALEN);
5022         memset(wl->mac_addr, 0, ETH_ALEN);
5023         wl->filter_flags = 0;
5024         wl->radiotap_enabled = false;
5025         b43_qos_clear(wl);
5026         wl->beacon0_uploaded = false;
5027         wl->beacon1_uploaded = false;
5028         wl->beacon_templates_virgin = true;
5029         wl->radio_enabled = true;
5030
5031         mutex_lock(&wl->mutex);
5032
5033         if (b43_status(dev) < B43_STAT_INITIALIZED) {
5034                 err = b43_wireless_core_init(dev);
5035                 if (err)
5036                         goto out_mutex_unlock;
5037                 did_init = 1;
5038         }
5039
5040         if (b43_status(dev) < B43_STAT_STARTED) {
5041                 err = b43_wireless_core_start(dev);
5042                 if (err) {
5043                         if (did_init)
5044                                 b43_wireless_core_exit(dev);
5045                         goto out_mutex_unlock;
5046                 }
5047         }
5048
5049         /* XXX: only do if device doesn't support rfkill irq */
5050         wiphy_rfkill_start_polling(hw->wiphy);
5051
5052  out_mutex_unlock:
5053         mutex_unlock(&wl->mutex);
5054
5055         /*
5056          * Configuration may have been overwritten during initialization.
5057          * Reload the configuration, but only if initialization was
5058          * successful. Reloading the configuration after a failed init
5059          * may hang the system.
5060          */
5061         if (!err)
5062                 b43_op_config(hw, ~0);
5063
5064         return err;
5065 }
5066
5067 static void b43_op_stop(struct ieee80211_hw *hw)
5068 {
5069         struct b43_wl *wl = hw_to_b43_wl(hw);
5070         struct b43_wldev *dev = wl->current_dev;
5071
5072         cancel_work_sync(&(wl->beacon_update_trigger));
5073
5074         if (!dev)
5075                 goto out;
5076
5077         mutex_lock(&wl->mutex);
5078         if (b43_status(dev) >= B43_STAT_STARTED) {
5079                 dev = b43_wireless_core_stop(dev);
5080                 if (!dev)
5081                         goto out_unlock;
5082         }
5083         b43_wireless_core_exit(dev);
5084         wl->radio_enabled = false;
5085
5086 out_unlock:
5087         mutex_unlock(&wl->mutex);
5088 out:
5089         cancel_work_sync(&(wl->txpower_adjust_work));
5090 }
5091
5092 static int b43_op_beacon_set_tim(struct ieee80211_hw *hw,
5093                                  struct ieee80211_sta *sta, bool set)
5094 {
5095         struct b43_wl *wl = hw_to_b43_wl(hw);
5096
5097         /* FIXME: add locking */
5098         b43_update_templates(wl);
5099
5100         return 0;
5101 }
5102
5103 static void b43_op_sta_notify(struct ieee80211_hw *hw,
5104                               struct ieee80211_vif *vif,
5105                               enum sta_notify_cmd notify_cmd,
5106                               struct ieee80211_sta *sta)
5107 {
5108         struct b43_wl *wl = hw_to_b43_wl(hw);
5109
5110         B43_WARN_ON(!vif || wl->vif != vif);
5111 }
5112
5113 static void b43_op_sw_scan_start_notifier(struct ieee80211_hw *hw)
5114 {
5115         struct b43_wl *wl = hw_to_b43_wl(hw);
5116         struct b43_wldev *dev;
5117
5118         mutex_lock(&wl->mutex);
5119         dev = wl->current_dev;
5120         if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) {
5121                 /* Disable CFP update during scan on other channels. */
5122                 b43_hf_write(dev, b43_hf_read(dev) | B43_HF_SKCFPUP);
5123         }
5124         mutex_unlock(&wl->mutex);
5125 }
5126
5127 static void b43_op_sw_scan_complete_notifier(struct ieee80211_hw *hw)
5128 {
5129         struct b43_wl *wl = hw_to_b43_wl(hw);
5130         struct b43_wldev *dev;
5131
5132         mutex_lock(&wl->mutex);
5133         dev = wl->current_dev;
5134         if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) {
5135                 /* Re-enable CFP update. */
5136                 b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_SKCFPUP);
5137         }
5138         mutex_unlock(&wl->mutex);
5139 }
5140
5141 static int b43_op_get_survey(struct ieee80211_hw *hw, int idx,
5142                              struct survey_info *survey)
5143 {
5144         struct b43_wl *wl = hw_to_b43_wl(hw);
5145         struct b43_wldev *dev = wl->current_dev;
5146         struct ieee80211_conf *conf = &hw->conf;
5147
5148         if (idx != 0)
5149                 return -ENOENT;
5150
5151         survey->channel = conf->chandef.chan;
5152         survey->filled = SURVEY_INFO_NOISE_DBM;
5153         survey->noise = dev->stats.link_noise;
5154
5155         return 0;
5156 }
5157
5158 static const struct ieee80211_ops b43_hw_ops = {
5159         .tx                     = b43_op_tx,
5160         .conf_tx                = b43_op_conf_tx,
5161         .add_interface          = b43_op_add_interface,
5162         .remove_interface       = b43_op_remove_interface,
5163         .config                 = b43_op_config,
5164         .bss_info_changed       = b43_op_bss_info_changed,
5165         .configure_filter       = b43_op_configure_filter,
5166         .set_key                = b43_op_set_key,
5167         .update_tkip_key        = b43_op_update_tkip_key,
5168         .get_stats              = b43_op_get_stats,
5169         .get_tsf                = b43_op_get_tsf,
5170         .set_tsf                = b43_op_set_tsf,
5171         .start                  = b43_op_start,
5172         .stop                   = b43_op_stop,
5173         .set_tim                = b43_op_beacon_set_tim,
5174         .sta_notify             = b43_op_sta_notify,
5175         .sw_scan_start          = b43_op_sw_scan_start_notifier,
5176         .sw_scan_complete       = b43_op_sw_scan_complete_notifier,
5177         .get_survey             = b43_op_get_survey,
5178         .rfkill_poll            = b43_rfkill_poll,
5179 };
5180
5181 /* Hard-reset the chip. Do not call this directly.
5182  * Use b43_controller_restart()
5183  */
5184 static void b43_chip_reset(struct work_struct *work)
5185 {
5186         struct b43_wldev *dev =
5187             container_of(work, struct b43_wldev, restart_work);
5188         struct b43_wl *wl = dev->wl;
5189         int err = 0;
5190         int prev_status;
5191
5192         mutex_lock(&wl->mutex);
5193
5194         prev_status = b43_status(dev);
5195         /* Bring the device down... */
5196         if (prev_status >= B43_STAT_STARTED) {
5197                 dev = b43_wireless_core_stop(dev);
5198                 if (!dev) {
5199                         err = -ENODEV;
5200                         goto out;
5201                 }
5202         }
5203         if (prev_status >= B43_STAT_INITIALIZED)
5204                 b43_wireless_core_exit(dev);
5205
5206         /* ...and up again. */
5207         if (prev_status >= B43_STAT_INITIALIZED) {
5208                 err = b43_wireless_core_init(dev);
5209                 if (err)
5210                         goto out;
5211         }
5212         if (prev_status >= B43_STAT_STARTED) {
5213                 err = b43_wireless_core_start(dev);
5214                 if (err) {
5215                         b43_wireless_core_exit(dev);
5216                         goto out;
5217                 }
5218         }
5219 out:
5220         if (err)
5221                 wl->current_dev = NULL; /* Failed to init the dev. */
5222         mutex_unlock(&wl->mutex);
5223
5224         if (err) {
5225                 b43err(wl, "Controller restart FAILED\n");
5226                 return;
5227         }
5228
5229         /* reload configuration */
5230         b43_op_config(wl->hw, ~0);
5231         if (wl->vif)
5232                 b43_op_bss_info_changed(wl->hw, wl->vif, &wl->vif->bss_conf, ~0);
5233
5234         b43info(wl, "Controller restarted\n");
5235 }
5236
5237 static int b43_setup_bands(struct b43_wldev *dev,
5238                            bool have_2ghz_phy, bool have_5ghz_phy)
5239 {
5240         struct ieee80211_hw *hw = dev->wl->hw;
5241         struct b43_phy *phy = &dev->phy;
5242         bool limited_2g;
5243         bool limited_5g;
5244
5245         /* We don't support all 2 GHz channels on some devices */
5246         limited_2g = phy->radio_ver == 0x2057 &&
5247                      (phy->radio_rev == 9 || phy->radio_rev == 14);
5248         limited_5g = phy->radio_ver == 0x2057 &&
5249                      phy->radio_rev == 9;
5250
5251         if (have_2ghz_phy)
5252                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = limited_2g ?
5253                         &b43_band_2ghz_limited : &b43_band_2GHz;
5254         if (dev->phy.type == B43_PHYTYPE_N) {
5255                 if (have_5ghz_phy)
5256                         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = limited_5g ?
5257                                 &b43_band_5GHz_nphy_limited :
5258                                 &b43_band_5GHz_nphy;
5259         } else {
5260                 if (have_5ghz_phy)
5261                         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_aphy;
5262         }
5263
5264         dev->phy.supports_2ghz = have_2ghz_phy;
5265         dev->phy.supports_5ghz = have_5ghz_phy;
5266
5267         return 0;
5268 }
5269
5270 static void b43_wireless_core_detach(struct b43_wldev *dev)
5271 {
5272         /* We release firmware that late to not be required to re-request
5273          * is all the time when we reinit the core. */
5274         b43_release_firmware(dev);
5275         b43_phy_free(dev);
5276 }
5277
5278 static void b43_supported_bands(struct b43_wldev *dev, bool *have_2ghz_phy,
5279                                 bool *have_5ghz_phy)
5280 {
5281         u16 dev_id = 0;
5282
5283 #ifdef CONFIG_B43_BCMA
5284         if (dev->dev->bus_type == B43_BUS_BCMA &&
5285             dev->dev->bdev->bus->hosttype == BCMA_HOSTTYPE_PCI)
5286                 dev_id = dev->dev->bdev->bus->host_pci->device;
5287 #endif
5288 #ifdef CONFIG_B43_SSB
5289         if (dev->dev->bus_type == B43_BUS_SSB &&
5290             dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI)
5291                 dev_id = dev->dev->sdev->bus->host_pci->device;
5292 #endif
5293         /* Override with SPROM value if available */
5294         if (dev->dev->bus_sprom->dev_id)
5295                 dev_id = dev->dev->bus_sprom->dev_id;
5296
5297         /* Note: below IDs can be "virtual" (not maching e.g. real PCI ID) */
5298         switch (dev_id) {
5299         case 0x4324: /* BCM4306 */
5300         case 0x4312: /* BCM4311 */
5301         case 0x4319: /* BCM4318 */
5302         case 0x4328: /* BCM4321 */
5303         case 0x432b: /* BCM4322 */
5304         case 0x4350: /* BCM43222 */
5305         case 0x4353: /* BCM43224 */
5306         case 0x0576: /* BCM43224 */
5307         case 0x435f: /* BCM6362 */
5308         case 0x4331: /* BCM4331 */
5309         case 0x4359: /* BCM43228 */
5310         case 0x43a0: /* BCM4360 */
5311         case 0x43b1: /* BCM4352 */
5312                 /* Dual band devices */
5313                 *have_2ghz_phy = true;
5314                 *have_5ghz_phy = true;
5315                 return;
5316         case 0x4321: /* BCM4306 */
5317         case 0x4313: /* BCM4311 */
5318         case 0x431a: /* BCM4318 */
5319         case 0x432a: /* BCM4321 */
5320         case 0x432d: /* BCM4322 */
5321         case 0x4352: /* BCM43222 */
5322         case 0x4333: /* BCM4331 */
5323         case 0x43a2: /* BCM4360 */
5324         case 0x43b3: /* BCM4352 */
5325                 /* 5 GHz only devices */
5326                 *have_2ghz_phy = false;
5327                 *have_5ghz_phy = true;
5328                 return;
5329         }
5330
5331         /* As a fallback, try to guess using PHY type */
5332         switch (dev->phy.type) {
5333         case B43_PHYTYPE_A:
5334                 *have_2ghz_phy = false;
5335                 *have_5ghz_phy = true;
5336                 return;
5337         case B43_PHYTYPE_G:
5338         case B43_PHYTYPE_N:
5339         case B43_PHYTYPE_LP:
5340         case B43_PHYTYPE_HT:
5341         case B43_PHYTYPE_LCN:
5342                 *have_2ghz_phy = true;
5343                 *have_5ghz_phy = false;
5344                 return;
5345         }
5346
5347         B43_WARN_ON(1);
5348 }
5349
5350 static int b43_wireless_core_attach(struct b43_wldev *dev)
5351 {
5352         struct b43_wl *wl = dev->wl;
5353         struct b43_phy *phy = &dev->phy;
5354         int err;
5355         u32 tmp;
5356         bool have_2ghz_phy = false, have_5ghz_phy = false;
5357
5358         /* Do NOT do any device initialization here.
5359          * Do it in wireless_core_init() instead.
5360          * This function is for gathering basic information about the HW, only.
5361          * Also some structs may be set up here. But most likely you want to have
5362          * that in core_init(), too.
5363          */
5364
5365         err = b43_bus_powerup(dev, 0);
5366         if (err) {
5367                 b43err(wl, "Bus powerup failed\n");
5368                 goto out;
5369         }
5370
5371         phy->do_full_init = true;
5372
5373         /* Try to guess supported bands for the first init needs */
5374         switch (dev->dev->bus_type) {
5375 #ifdef CONFIG_B43_BCMA
5376         case B43_BUS_BCMA:
5377                 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOST);
5378                 have_2ghz_phy = !!(tmp & B43_BCMA_IOST_2G_PHY);
5379                 have_5ghz_phy = !!(tmp & B43_BCMA_IOST_5G_PHY);
5380                 break;
5381 #endif
5382 #ifdef CONFIG_B43_SSB
5383         case B43_BUS_SSB:
5384                 if (dev->dev->core_rev >= 5) {
5385                         tmp = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
5386                         have_2ghz_phy = !!(tmp & B43_TMSHIGH_HAVE_2GHZ_PHY);
5387                         have_5ghz_phy = !!(tmp & B43_TMSHIGH_HAVE_5GHZ_PHY);
5388                 } else
5389                         B43_WARN_ON(1);
5390                 break;
5391 #endif
5392         }
5393
5394         dev->phy.gmode = have_2ghz_phy;
5395         b43_wireless_core_reset(dev, dev->phy.gmode);
5396
5397         /* Get the PHY type. */
5398         err = b43_phy_versioning(dev);
5399         if (err)
5400                 goto err_powerdown;
5401
5402         /* Get real info about supported bands */
5403         b43_supported_bands(dev, &have_2ghz_phy, &have_5ghz_phy);
5404
5405         /* We don't support 5 GHz on some PHYs yet */
5406         if (have_5ghz_phy) {
5407                 switch (dev->phy.type) {
5408                 case B43_PHYTYPE_A:
5409                 case B43_PHYTYPE_G:
5410                 case B43_PHYTYPE_LP:
5411                 case B43_PHYTYPE_HT:
5412                         b43warn(wl, "5 GHz band is unsupported on this PHY\n");
5413                         have_5ghz_phy = false;
5414                 }
5415         }
5416
5417         if (!have_2ghz_phy && !have_5ghz_phy) {
5418                 b43err(wl, "b43 can't support any band on this device\n");
5419                 err = -EOPNOTSUPP;
5420                 goto err_powerdown;
5421         }
5422
5423         err = b43_phy_allocate(dev);
5424         if (err)
5425                 goto err_powerdown;
5426
5427         dev->phy.gmode = have_2ghz_phy;
5428         b43_wireless_core_reset(dev, dev->phy.gmode);
5429
5430         err = b43_validate_chipaccess(dev);
5431         if (err)
5432                 goto err_phy_free;
5433         err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy);
5434         if (err)
5435                 goto err_phy_free;
5436
5437         /* Now set some default "current_dev" */
5438         if (!wl->current_dev)
5439                 wl->current_dev = dev;
5440         INIT_WORK(&dev->restart_work, b43_chip_reset);
5441
5442         dev->phy.ops->switch_analog(dev, 0);
5443         b43_device_disable(dev, 0);
5444         b43_bus_may_powerdown(dev);
5445
5446 out:
5447         return err;
5448
5449 err_phy_free:
5450         b43_phy_free(dev);
5451 err_powerdown:
5452         b43_bus_may_powerdown(dev);
5453         return err;
5454 }
5455
5456 static void b43_one_core_detach(struct b43_bus_dev *dev)
5457 {
5458         struct b43_wldev *wldev;
5459         struct b43_wl *wl;
5460
5461         /* Do not cancel ieee80211-workqueue based work here.
5462          * See comment in b43_remove(). */
5463
5464         wldev = b43_bus_get_wldev(dev);
5465         wl = wldev->wl;
5466         b43_debugfs_remove_device(wldev);
5467         b43_wireless_core_detach(wldev);
5468         list_del(&wldev->list);
5469         b43_bus_set_wldev(dev, NULL);
5470         kfree(wldev);
5471 }
5472
5473 static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl)
5474 {
5475         struct b43_wldev *wldev;
5476         int err = -ENOMEM;
5477
5478         wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
5479         if (!wldev)
5480                 goto out;
5481
5482         wldev->use_pio = b43_modparam_pio;
5483         wldev->dev = dev;
5484         wldev->wl = wl;
5485         b43_set_status(wldev, B43_STAT_UNINIT);
5486         wldev->bad_frames_preempt = modparam_bad_frames_preempt;
5487         INIT_LIST_HEAD(&wldev->list);
5488
5489         err = b43_wireless_core_attach(wldev);
5490         if (err)
5491                 goto err_kfree_wldev;
5492
5493         b43_bus_set_wldev(dev, wldev);
5494         b43_debugfs_add_device(wldev);
5495
5496       out:
5497         return err;
5498
5499       err_kfree_wldev:
5500         kfree(wldev);
5501         return err;
5502 }
5503
5504 #define IS_PDEV(pdev, _vendor, _device, _subvendor, _subdevice)         ( \
5505         (pdev->vendor == PCI_VENDOR_ID_##_vendor) &&                    \
5506         (pdev->device == _device) &&                                    \
5507         (pdev->subsystem_vendor == PCI_VENDOR_ID_##_subvendor) &&       \
5508         (pdev->subsystem_device == _subdevice)                          )
5509
5510 #ifdef CONFIG_B43_SSB
5511 static void b43_sprom_fixup(struct ssb_bus *bus)
5512 {
5513         struct pci_dev *pdev;
5514
5515         /* boardflags workarounds */
5516         if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
5517             bus->chip_id == 0x4301 && bus->sprom.board_rev == 0x74)
5518                 bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
5519         if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
5520             bus->boardinfo.type == 0x4E && bus->sprom.board_rev > 0x40)
5521                 bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
5522         if (bus->bustype == SSB_BUSTYPE_PCI) {
5523                 pdev = bus->host_pci;
5524                 if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
5525                     IS_PDEV(pdev, BROADCOM, 0x4320,    DELL, 0x0003) ||
5526                     IS_PDEV(pdev, BROADCOM, 0x4320,      HP, 0x12f8) ||
5527                     IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
5528                     IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
5529                     IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) ||
5530                     IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010))
5531                         bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
5532         }
5533 }
5534
5535 static void b43_wireless_exit(struct b43_bus_dev *dev, struct b43_wl *wl)
5536 {
5537         struct ieee80211_hw *hw = wl->hw;
5538
5539         ssb_set_devtypedata(dev->sdev, NULL);
5540         ieee80211_free_hw(hw);
5541 }
5542 #endif
5543
5544 static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
5545 {
5546         struct ssb_sprom *sprom = dev->bus_sprom;
5547         struct ieee80211_hw *hw;
5548         struct b43_wl *wl;
5549         char chip_name[6];
5550         int queue_num;
5551
5552         hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops);
5553         if (!hw) {
5554                 b43err(NULL, "Could not allocate ieee80211 device\n");
5555                 return ERR_PTR(-ENOMEM);
5556         }
5557         wl = hw_to_b43_wl(hw);
5558
5559         /* fill hw info */
5560         hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
5561                     IEEE80211_HW_SIGNAL_DBM;
5562
5563         hw->wiphy->interface_modes =
5564                 BIT(NL80211_IFTYPE_AP) |
5565                 BIT(NL80211_IFTYPE_MESH_POINT) |
5566                 BIT(NL80211_IFTYPE_STATION) |
5567                 BIT(NL80211_IFTYPE_WDS) |
5568                 BIT(NL80211_IFTYPE_ADHOC);
5569
5570         hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
5571
5572         wl->hw_registred = false;
5573         hw->max_rates = 2;
5574         SET_IEEE80211_DEV(hw, dev->dev);
5575         if (is_valid_ether_addr(sprom->et1mac))
5576                 SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
5577         else
5578                 SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
5579
5580         /* Initialize struct b43_wl */
5581         wl->hw = hw;
5582         mutex_init(&wl->mutex);
5583         spin_lock_init(&wl->hardirq_lock);
5584         INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
5585         INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work);
5586         INIT_WORK(&wl->tx_work, b43_tx_work);
5587
5588         /* Initialize queues and flags. */
5589         for (queue_num = 0; queue_num < B43_QOS_QUEUE_NUM; queue_num++) {
5590                 skb_queue_head_init(&wl->tx_queue[queue_num]);
5591                 wl->tx_queue_stopped[queue_num] = 0;
5592         }
5593
5594         snprintf(chip_name, ARRAY_SIZE(chip_name),
5595                  (dev->chip_id > 0x9999) ? "%d" : "%04X", dev->chip_id);
5596         b43info(wl, "Broadcom %s WLAN found (core revision %u)\n", chip_name,
5597                 dev->core_rev);
5598         return wl;
5599 }
5600
5601 #ifdef CONFIG_B43_BCMA
5602 static int b43_bcma_probe(struct bcma_device *core)
5603 {
5604         struct b43_bus_dev *dev;
5605         struct b43_wl *wl;
5606         int err;
5607
5608         if (!modparam_allhwsupport &&
5609             (core->id.rev == 0x17 || core->id.rev == 0x18)) {
5610                 pr_err("Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1\n");
5611                 return -ENOTSUPP;
5612         }
5613
5614         dev = b43_bus_dev_bcma_init(core);
5615         if (!dev)
5616                 return -ENODEV;
5617
5618         wl = b43_wireless_init(dev);
5619         if (IS_ERR(wl)) {
5620                 err = PTR_ERR(wl);
5621                 goto bcma_out;
5622         }
5623
5624         err = b43_one_core_attach(dev, wl);
5625         if (err)
5626                 goto bcma_err_wireless_exit;
5627
5628         /* setup and start work to load firmware */
5629         INIT_WORK(&wl->firmware_load, b43_request_firmware);
5630         schedule_work(&wl->firmware_load);
5631
5632 bcma_out:
5633         return err;
5634
5635 bcma_err_wireless_exit:
5636         ieee80211_free_hw(wl->hw);
5637         return err;
5638 }
5639
5640 static void b43_bcma_remove(struct bcma_device *core)
5641 {
5642         struct b43_wldev *wldev = bcma_get_drvdata(core);
5643         struct b43_wl *wl = wldev->wl;
5644
5645         /* We must cancel any work here before unregistering from ieee80211,
5646          * as the ieee80211 unreg will destroy the workqueue. */
5647         cancel_work_sync(&wldev->restart_work);
5648         cancel_work_sync(&wl->firmware_load);
5649
5650         B43_WARN_ON(!wl);
5651         if (!wldev->fw.ucode.data)
5652                 return;                 /* NULL if firmware never loaded */
5653         if (wl->current_dev == wldev && wl->hw_registred) {
5654                 b43_leds_stop(wldev);
5655                 ieee80211_unregister_hw(wl->hw);
5656         }
5657
5658         b43_one_core_detach(wldev->dev);
5659
5660         /* Unregister HW RNG driver */
5661         b43_rng_exit(wl);
5662
5663         b43_leds_unregister(wl);
5664
5665         ieee80211_free_hw(wl->hw);
5666 }
5667
5668 static struct bcma_driver b43_bcma_driver = {
5669         .name           = KBUILD_MODNAME,
5670         .id_table       = b43_bcma_tbl,
5671         .probe          = b43_bcma_probe,
5672         .remove         = b43_bcma_remove,
5673 };
5674 #endif
5675
5676 #ifdef CONFIG_B43_SSB
5677 static
5678 int b43_ssb_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
5679 {
5680         struct b43_bus_dev *dev;
5681         struct b43_wl *wl;
5682         int err;
5683
5684         dev = b43_bus_dev_ssb_init(sdev);
5685         if (!dev)
5686                 return -ENOMEM;
5687
5688         wl = ssb_get_devtypedata(sdev);
5689         if (wl) {
5690                 b43err(NULL, "Dual-core devices are not supported\n");
5691                 err = -ENOTSUPP;
5692                 goto err_ssb_kfree_dev;
5693         }
5694
5695         b43_sprom_fixup(sdev->bus);
5696
5697         wl = b43_wireless_init(dev);
5698         if (IS_ERR(wl)) {
5699                 err = PTR_ERR(wl);
5700                 goto err_ssb_kfree_dev;
5701         }
5702         ssb_set_devtypedata(sdev, wl);
5703         B43_WARN_ON(ssb_get_devtypedata(sdev) != wl);
5704
5705         err = b43_one_core_attach(dev, wl);
5706         if (err)
5707                 goto err_ssb_wireless_exit;
5708
5709         /* setup and start work to load firmware */
5710         INIT_WORK(&wl->firmware_load, b43_request_firmware);
5711         schedule_work(&wl->firmware_load);
5712
5713         return err;
5714
5715 err_ssb_wireless_exit:
5716         b43_wireless_exit(dev, wl);
5717 err_ssb_kfree_dev:
5718         kfree(dev);
5719         return err;
5720 }
5721
5722 static void b43_ssb_remove(struct ssb_device *sdev)
5723 {
5724         struct b43_wl *wl = ssb_get_devtypedata(sdev);
5725         struct b43_wldev *wldev = ssb_get_drvdata(sdev);
5726         struct b43_bus_dev *dev = wldev->dev;
5727
5728         /* We must cancel any work here before unregistering from ieee80211,
5729          * as the ieee80211 unreg will destroy the workqueue. */
5730         cancel_work_sync(&wldev->restart_work);
5731         cancel_work_sync(&wl->firmware_load);
5732
5733         B43_WARN_ON(!wl);
5734         if (!wldev->fw.ucode.data)
5735                 return;                 /* NULL if firmware never loaded */
5736         if (wl->current_dev == wldev && wl->hw_registred) {
5737                 b43_leds_stop(wldev);
5738                 ieee80211_unregister_hw(wl->hw);
5739         }
5740
5741         b43_one_core_detach(dev);
5742
5743         /* Unregister HW RNG driver */
5744         b43_rng_exit(wl);
5745
5746         b43_leds_unregister(wl);
5747         b43_wireless_exit(dev, wl);
5748 }
5749
5750 static struct ssb_driver b43_ssb_driver = {
5751         .name           = KBUILD_MODNAME,
5752         .id_table       = b43_ssb_tbl,
5753         .probe          = b43_ssb_probe,
5754         .remove         = b43_ssb_remove,
5755 };
5756 #endif /* CONFIG_B43_SSB */
5757
5758 /* Perform a hardware reset. This can be called from any context. */
5759 void b43_controller_restart(struct b43_wldev *dev, const char *reason)
5760 {
5761         /* Must avoid requeueing, if we are in shutdown. */
5762         if (b43_status(dev) < B43_STAT_INITIALIZED)
5763                 return;
5764         b43info(dev->wl, "Controller RESET (%s) ...\n", reason);
5765         ieee80211_queue_work(dev->wl->hw, &dev->restart_work);
5766 }
5767
5768 static void b43_print_driverinfo(void)
5769 {
5770         const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
5771                    *feat_leds = "", *feat_sdio = "";
5772
5773 #ifdef CONFIG_B43_PCI_AUTOSELECT
5774         feat_pci = "P";
5775 #endif
5776 #ifdef CONFIG_B43_PCMCIA
5777         feat_pcmcia = "M";
5778 #endif
5779 #ifdef CONFIG_B43_PHY_N
5780         feat_nphy = "N";
5781 #endif
5782 #ifdef CONFIG_B43_LEDS
5783         feat_leds = "L";
5784 #endif
5785 #ifdef CONFIG_B43_SDIO
5786         feat_sdio = "S";
5787 #endif
5788         printk(KERN_INFO "Broadcom 43xx driver loaded "
5789                "[ Features: %s%s%s%s%s ]\n",
5790                feat_pci, feat_pcmcia, feat_nphy,
5791                feat_leds, feat_sdio);
5792 }
5793
5794 static int __init b43_init(void)
5795 {
5796         int err;
5797
5798         b43_debugfs_init();
5799         err = b43_pcmcia_init();
5800         if (err)
5801                 goto err_dfs_exit;
5802         err = b43_sdio_init();
5803         if (err)
5804                 goto err_pcmcia_exit;
5805 #ifdef CONFIG_B43_BCMA
5806         err = bcma_driver_register(&b43_bcma_driver);
5807         if (err)
5808                 goto err_sdio_exit;
5809 #endif
5810 #ifdef CONFIG_B43_SSB
5811         err = ssb_driver_register(&b43_ssb_driver);
5812         if (err)
5813                 goto err_bcma_driver_exit;
5814 #endif
5815         b43_print_driverinfo();
5816
5817         return err;
5818
5819 #ifdef CONFIG_B43_SSB
5820 err_bcma_driver_exit:
5821 #endif
5822 #ifdef CONFIG_B43_BCMA
5823         bcma_driver_unregister(&b43_bcma_driver);
5824 err_sdio_exit:
5825 #endif
5826         b43_sdio_exit();
5827 err_pcmcia_exit:
5828         b43_pcmcia_exit();
5829 err_dfs_exit:
5830         b43_debugfs_exit();
5831         return err;
5832 }
5833
5834 static void __exit b43_exit(void)
5835 {
5836 #ifdef CONFIG_B43_SSB
5837         ssb_driver_unregister(&b43_ssb_driver);
5838 #endif
5839 #ifdef CONFIG_B43_BCMA
5840         bcma_driver_unregister(&b43_bcma_driver);
5841 #endif
5842         b43_sdio_exit();
5843         b43_pcmcia_exit();
5844         b43_debugfs_exit();
5845 }
5846
5847 module_init(b43_init)
5848 module_exit(b43_exit)