drivers/net/wireless/brcm80211/brcmfmac/usb.c

   1 /*
   2  * Copyright (c) 2011 Broadcom Corporation
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #include <linux/kernel.h>
  18 #include <linux/module.h>
  19 #include <linux/firmware.h>
  20 #include <linux/usb.h>
  21 #include <linux/vmalloc.h>
  22
  23 #include <brcmu_utils.h>
  24 #include <brcm_hw_ids.h>
  25 #include <brcmu_wifi.h>
  26 #include <dhd_bus.h>
  27 #include <dhd_dbg.h>
  28
  29 #include "firmware.h"
  30 #include "usb_rdl.h"
  31 #include "usb.h"
  32
  33 #define IOCTL_RESP_TIMEOUT              2000
  34
  35 #define BRCMF_USB_RESET_GETVER_SPINWAIT 100     /* in unit of ms */
  36 #define BRCMF_USB_RESET_GETVER_LOOP_CNT 10
  37
  38 #define BRCMF_POSTBOOT_ID               0xA123  /* ID to detect if dongle
  39                                                    has boot up */
  40 #define BRCMF_USB_NRXQ                  50
  41 #define BRCMF_USB_NTXQ                  50
  42
  43 #define BRCMF_USB_CBCTL_WRITE           0
  44 #define BRCMF_USB_CBCTL_READ            1
  45 #define BRCMF_USB_MAX_PKT_SIZE          1600
  46
  47 #define BRCMF_USB_43143_FW_NAME         "brcm/brcmfmac43143.bin"
  48 #define BRCMF_USB_43236_FW_NAME         "brcm/brcmfmac43236b.bin"
  49 #define BRCMF_USB_43242_FW_NAME         "brcm/brcmfmac43242a.bin"
  50 #define BRCMF_USB_43569_FW_NAME         "brcm/brcmfmac43569.bin"
  51
  52 struct brcmf_usb_image {
  53         struct list_head list;
  54         s8 *fwname;
  55         u8 *image;
  56         int image_len;
  57 };
  58
  59 struct brcmf_usbdev_info {
  60         struct brcmf_usbdev bus_pub; /* MUST BE FIRST */
  61         spinlock_t qlock;
  62         struct list_head rx_freeq;
  63         struct list_head rx_postq;
  64         struct list_head tx_freeq;
  65         struct list_head tx_postq;
  66         uint rx_pipe, tx_pipe;
  67
  68         int rx_low_watermark;
  69         int tx_low_watermark;
  70         int tx_high_watermark;
  71         int tx_freecount;
  72         bool tx_flowblock;
  73         spinlock_t tx_flowblock_lock;
  74
  75         struct brcmf_usbreq *tx_reqs;
  76         struct brcmf_usbreq *rx_reqs;
  77
  78         const u8 *image;        /* buffer for combine fw and nvram */
  79         int image_len;
  80
  81         struct usb_device *usbdev;
  82         struct device *dev;
  83
  84         int ctl_in_pipe, ctl_out_pipe;
  85         struct urb *ctl_urb; /* URB for control endpoint */
  86         struct usb_ctrlrequest ctl_write;
  87         struct usb_ctrlrequest ctl_read;
  88         u32 ctl_urb_actual_length;
  89         int ctl_urb_status;
  90         int ctl_completed;
  91         wait_queue_head_t ioctl_resp_wait;
  92         ulong ctl_op;
  93         u8 ifnum;
  94
  95         struct urb *bulk_urb; /* used for FW download */
  96 };
  97
  98 static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
  99                                 struct brcmf_usbreq  *req);
 100
 101 static struct brcmf_usbdev *brcmf_usb_get_buspub(struct device *dev)
 102 {
 103         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 104         return bus_if->bus_priv.usb;
 105 }
 106
 107 static struct brcmf_usbdev_info *brcmf_usb_get_businfo(struct device *dev)
 108 {
 109         return brcmf_usb_get_buspub(dev)->devinfo;
 110 }
 111
 112 static int brcmf_usb_ioctl_resp_wait(struct brcmf_usbdev_info *devinfo)
 113 {
 114         return wait_event_timeout(devinfo->ioctl_resp_wait,
 115                                   devinfo->ctl_completed,
 116                                   msecs_to_jiffies(IOCTL_RESP_TIMEOUT));
 117 }
 118
 119 static void brcmf_usb_ioctl_resp_wake(struct brcmf_usbdev_info *devinfo)
 120 {
 121         if (waitqueue_active(&devinfo->ioctl_resp_wait))
 122                 wake_up(&devinfo->ioctl_resp_wait);
 123 }
 124
 125 static void
 126 brcmf_usb_ctl_complete(struct brcmf_usbdev_info *devinfo, int type, int status)
 127 {
 128         brcmf_dbg(USB, "Enter, status=%d\n", status);
 129
 130         if (unlikely(devinfo == NULL))
 131                 return;
 132
 133         if (type == BRCMF_USB_CBCTL_READ) {
 134                 if (status == 0)
 135                         devinfo->bus_pub.stats.rx_ctlpkts++;
 136                 else
 137                         devinfo->bus_pub.stats.rx_ctlerrs++;
 138         } else if (type == BRCMF_USB_CBCTL_WRITE) {
 139                 if (status == 0)
 140                         devinfo->bus_pub.stats.tx_ctlpkts++;
 141                 else
 142                         devinfo->bus_pub.stats.tx_ctlerrs++;
 143         }
 144
 145         devinfo->ctl_urb_status = status;
 146         devinfo->ctl_completed = true;
 147         brcmf_usb_ioctl_resp_wake(devinfo);
 148 }
 149
 150 static void
 151 brcmf_usb_ctlread_complete(struct urb *urb)
 152 {
 153         struct brcmf_usbdev_info *devinfo =
 154                 (struct brcmf_usbdev_info *)urb->context;
 155
 156         brcmf_dbg(USB, "Enter\n");
 157         devinfo->ctl_urb_actual_length = urb->actual_length;
 158         brcmf_usb_ctl_complete(devinfo, BRCMF_USB_CBCTL_READ,
 159                 urb->status);
 160 }
 161
 162 static void
 163 brcmf_usb_ctlwrite_complete(struct urb *urb)
 164 {
 165         struct brcmf_usbdev_info *devinfo =
 166                 (struct brcmf_usbdev_info *)urb->context;
 167
 168         brcmf_dbg(USB, "Enter\n");
 169         brcmf_usb_ctl_complete(devinfo, BRCMF_USB_CBCTL_WRITE,
 170                 urb->status);
 171 }
 172
 173 static int
 174 brcmf_usb_send_ctl(struct brcmf_usbdev_info *devinfo, u8 *buf, int len)
 175 {
 176         int ret;
 177         u16 size;
 178
 179         brcmf_dbg(USB, "Enter\n");
 180         if (devinfo == NULL || buf == NULL ||
 181             len == 0 || devinfo->ctl_urb == NULL)
 182                 return -EINVAL;
 183
 184         size = len;
 185         devinfo->ctl_write.wLength = cpu_to_le16p(&size);
 186         devinfo->ctl_urb->transfer_buffer_length = size;
 187         devinfo->ctl_urb_status = 0;
 188         devinfo->ctl_urb_actual_length = 0;
 189
 190         usb_fill_control_urb(devinfo->ctl_urb,
 191                 devinfo->usbdev,
 192                 devinfo->ctl_out_pipe,
 193                 (unsigned char *) &devinfo->ctl_write,
 194                 buf, size,
 195                 (usb_complete_t)brcmf_usb_ctlwrite_complete,
 196                 devinfo);
 197
 198         ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
 199         if (ret < 0)
 200                 brcmf_err("usb_submit_urb failed %d\n", ret);
 201
 202         return ret;
 203 }
 204
 205 static int
 206 brcmf_usb_recv_ctl(struct brcmf_usbdev_info *devinfo, u8 *buf, int len)
 207 {
 208         int ret;
 209         u16 size;
 210
 211         brcmf_dbg(USB, "Enter\n");
 212         if ((devinfo == NULL) || (buf == NULL) || (len == 0)
 213                 || (devinfo->ctl_urb == NULL))
 214                 return -EINVAL;
 215
 216         size = len;
 217         devinfo->ctl_read.wLength = cpu_to_le16p(&size);
 218         devinfo->ctl_urb->transfer_buffer_length = size;
 219
 220         devinfo->ctl_read.bRequestType = USB_DIR_IN
 221                 | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
 222         devinfo->ctl_read.bRequest = 1;
 223
 224         usb_fill_control_urb(devinfo->ctl_urb,
 225                 devinfo->usbdev,
 226                 devinfo->ctl_in_pipe,
 227                 (unsigned char *) &devinfo->ctl_read,
 228                 buf, size,
 229                 (usb_complete_t)brcmf_usb_ctlread_complete,
 230                 devinfo);
 231
 232         ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
 233         if (ret < 0)
 234                 brcmf_err("usb_submit_urb failed %d\n", ret);
 235
 236         return ret;
 237 }
 238
 239 static int brcmf_usb_tx_ctlpkt(struct device *dev, u8 *buf, u32 len)
 240 {
 241         int err = 0;
 242         int timeout = 0;
 243         struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 244
 245         brcmf_dbg(USB, "Enter\n");
 246         if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP)
 247                 return -EIO;
 248
 249         if (test_and_set_bit(0, &devinfo->ctl_op))
 250                 return -EIO;
 251
 252         devinfo->ctl_completed = false;
 253         err = brcmf_usb_send_ctl(devinfo, buf, len);
 254         if (err) {
 255                 brcmf_err("fail %d bytes: %d\n", err, len);
 256                 clear_bit(0, &devinfo->ctl_op);
 257                 return err;
 258         }
 259         timeout = brcmf_usb_ioctl_resp_wait(devinfo);
 260         clear_bit(0, &devinfo->ctl_op);
 261         if (!timeout) {
 262                 brcmf_err("Txctl wait timed out\n");
 263                 err = -EIO;
 264         }
 265         return err;
 266 }
 267
 268 static int brcmf_usb_rx_ctlpkt(struct device *dev, u8 *buf, u32 len)
 269 {
 270         int err = 0;
 271         int timeout = 0;
 272         struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 273
 274         brcmf_dbg(USB, "Enter\n");
 275         if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP)
 276                 return -EIO;
 277
 278         if (test_and_set_bit(0, &devinfo->ctl_op))
 279                 return -EIO;
 280
 281         devinfo->ctl_completed = false;
 282         err = brcmf_usb_recv_ctl(devinfo, buf, len);
 283         if (err) {
 284                 brcmf_err("fail %d bytes: %d\n", err, len);
 285                 clear_bit(0, &devinfo->ctl_op);
 286                 return err;
 287         }
 288         timeout = brcmf_usb_ioctl_resp_wait(devinfo);
 289         err = devinfo->ctl_urb_status;
 290         clear_bit(0, &devinfo->ctl_op);
 291         if (!timeout) {
 292                 brcmf_err("rxctl wait timed out\n");
 293                 err = -EIO;
 294         }
 295         if (!err)
 296                 return devinfo->ctl_urb_actual_length;
 297         else
 298                 return err;
 299 }
 300
 301 static struct brcmf_usbreq *brcmf_usb_deq(struct brcmf_usbdev_info *devinfo,
 302                                           struct list_head *q, int *counter)
 303 {
 304         unsigned long flags;
 305         struct brcmf_usbreq  *req;
 306         spin_lock_irqsave(&devinfo->qlock, flags);
 307         if (list_empty(q)) {
 308                 spin_unlock_irqrestore(&devinfo->qlock, flags);
 309                 return NULL;
 310         }
 311         req = list_entry(q->next, struct brcmf_usbreq, list);
 312         list_del_init(q->next);
 313         if (counter)
 314                 (*counter)--;
 315         spin_unlock_irqrestore(&devinfo->qlock, flags);
 316         return req;
 317
 318 }
 319
 320 static void brcmf_usb_enq(struct brcmf_usbdev_info *devinfo,
 321                           struct list_head *q, struct brcmf_usbreq *req,
 322                           int *counter)
 323 {
 324         unsigned long flags;
 325         spin_lock_irqsave(&devinfo->qlock, flags);
 326         list_add_tail(&req->list, q);
 327         if (counter)
 328                 (*counter)++;
 329         spin_unlock_irqrestore(&devinfo->qlock, flags);
 330 }
 331
 332 static struct brcmf_usbreq *
 333 brcmf_usbdev_qinit(struct list_head *q, int qsize)
 334 {
 335         int i;
 336         struct brcmf_usbreq *req, *reqs;
 337
 338         reqs = kcalloc(qsize, sizeof(struct brcmf_usbreq), GFP_ATOMIC);
 339         if (reqs == NULL)
 340                 return NULL;
 341
 342         req = reqs;
 343
 344         for (i = 0; i < qsize; i++) {
 345                 req->urb = usb_alloc_urb(0, GFP_ATOMIC);
 346                 if (!req->urb)
 347                         goto fail;
 348
 349                 INIT_LIST_HEAD(&req->list);
 350                 list_add_tail(&req->list, q);
 351                 req++;
 352         }
 353         return reqs;
 354 fail:
 355         brcmf_err("fail!\n");
 356         while (!list_empty(q)) {
 357                 req = list_entry(q->next, struct brcmf_usbreq, list);
 358                 if (req && req->urb)
 359                         usb_free_urb(req->urb);
 360                 list_del(q->next);
 361         }
 362         return NULL;
 363
 364 }
 365
 366 static void brcmf_usb_free_q(struct list_head *q, bool pending)
 367 {
 368         struct brcmf_usbreq *req, *next;
 369         int i = 0;
 370         list_for_each_entry_safe(req, next, q, list) {
 371                 if (!req->urb) {
 372                         brcmf_err("bad req\n");
 373                         break;
 374                 }
 375                 i++;
 376                 if (pending) {
 377                         usb_kill_urb(req->urb);
 378                 } else {
 379                         usb_free_urb(req->urb);
 380                         list_del_init(&req->list);
 381                 }
 382         }
 383 }
 384
 385 static void brcmf_usb_del_fromq(struct brcmf_usbdev_info *devinfo,
 386                                 struct brcmf_usbreq *req)
 387 {
 388         unsigned long flags;
 389
 390         spin_lock_irqsave(&devinfo->qlock, flags);
 391         list_del_init(&req->list);
 392         spin_unlock_irqrestore(&devinfo->qlock, flags);
 393 }
 394
 395
 396 static void brcmf_usb_tx_complete(struct urb *urb)
 397 {
 398         struct brcmf_usbreq *req = (struct brcmf_usbreq *)urb->context;
 399         struct brcmf_usbdev_info *devinfo = req->devinfo;
 400         unsigned long flags;
 401
 402         brcmf_dbg(USB, "Enter, urb->status=%d, skb=%p\n", urb->status,
 403                   req->skb);
 404         brcmf_usb_del_fromq(devinfo, req);
 405
 406         brcmf_txcomplete(devinfo->dev, req->skb, urb->status == 0);
 407         req->skb = NULL;
 408         brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req, &devinfo->tx_freecount);
 409         spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
 410         if (devinfo->tx_freecount > devinfo->tx_high_watermark &&
 411                 devinfo->tx_flowblock) {
 412                 brcmf_txflowblock(devinfo->dev, false);
 413                 devinfo->tx_flowblock = false;
 414         }
 415         spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
 416 }
 417
 418 static void brcmf_usb_rx_complete(struct urb *urb)
 419 {
 420         struct brcmf_usbreq  *req = (struct brcmf_usbreq *)urb->context;
 421         struct brcmf_usbdev_info *devinfo = req->devinfo;
 422         struct sk_buff *skb;
 423
 424         brcmf_dbg(USB, "Enter, urb->status=%d\n", urb->status);
 425         brcmf_usb_del_fromq(devinfo, req);
 426         skb = req->skb;
 427         req->skb = NULL;
 428
 429         /* zero lenght packets indicate usb "failure". Do not refill */
 430         if (urb->status != 0 || !urb->actual_length) {
 431                 brcmu_pkt_buf_free_skb(skb);
 432                 brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 433                 return;
 434         }
 435
 436         if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) {
 437                 skb_put(skb, urb->actual_length);
 438                 brcmf_rx_frame(devinfo->dev, skb);
 439                 brcmf_usb_rx_refill(devinfo, req);
 440         } else {
 441                 brcmu_pkt_buf_free_skb(skb);
 442                 brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 443         }
 444         return;
 445
 446 }
 447
 448 static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
 449                                 struct brcmf_usbreq  *req)
 450 {
 451         struct sk_buff *skb;
 452         int ret;
 453
 454         if (!req || !devinfo)
 455                 return;
 456
 457         skb = dev_alloc_skb(devinfo->bus_pub.bus_mtu);
 458         if (!skb) {
 459                 brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 460                 return;
 461         }
 462         req->skb = skb;
 463
 464         usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->rx_pipe,
 465                           skb->data, skb_tailroom(skb), brcmf_usb_rx_complete,
 466                           req);
 467         req->devinfo = devinfo;
 468         brcmf_usb_enq(devinfo, &devinfo->rx_postq, req, NULL);
 469
 470         ret = usb_submit_urb(req->urb, GFP_ATOMIC);
 471         if (ret) {
 472                 brcmf_usb_del_fromq(devinfo, req);
 473                 brcmu_pkt_buf_free_skb(req->skb);
 474                 req->skb = NULL;
 475                 brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 476         }
 477         return;
 478 }
 479
 480 static void brcmf_usb_rx_fill_all(struct brcmf_usbdev_info *devinfo)
 481 {
 482         struct brcmf_usbreq *req;
 483
 484         if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) {
 485                 brcmf_err("bus is not up=%d\n", devinfo->bus_pub.state);
 486                 return;
 487         }
 488         while ((req = brcmf_usb_deq(devinfo, &devinfo->rx_freeq, NULL)) != NULL)
 489                 brcmf_usb_rx_refill(devinfo, req);
 490 }
 491
 492 static void
 493 brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state)
 494 {
 495         struct brcmf_bus *bcmf_bus = devinfo->bus_pub.bus;
 496         int old_state;
 497
 498         brcmf_dbg(USB, "Enter, current state=%d, new state=%d\n",
 499                   devinfo->bus_pub.state, state);
 500
 501         if (devinfo->bus_pub.state == state)
 502                 return;
 503
 504         old_state = devinfo->bus_pub.state;
 505         devinfo->bus_pub.state = state;
 506
 507         /* update state of upper layer */
 508         if (state == BRCMFMAC_USB_STATE_DOWN) {
 509                 brcmf_dbg(USB, "DBUS is down\n");
 510                 brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_DOWN);
 511         } else if (state == BRCMFMAC_USB_STATE_UP) {
 512                 brcmf_dbg(USB, "DBUS is up\n");
 513                 brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_DATA);
 514         } else {
 515                 brcmf_dbg(USB, "DBUS current state=%d\n", state);
 516         }
 517 }
 518
 519 static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
 520 {
 521         struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 522         struct brcmf_usbreq  *req;
 523         int ret;
 524         unsigned long flags;
 525
 526         brcmf_dbg(USB, "Enter, skb=%p\n", skb);
 527         if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) {
 528                 ret = -EIO;
 529                 goto fail;
 530         }
 531
 532         req = brcmf_usb_deq(devinfo, &devinfo->tx_freeq,
 533                                         &devinfo->tx_freecount);
 534         if (!req) {
 535                 brcmf_err("no req to send\n");
 536                 ret = -ENOMEM;
 537                 goto fail;
 538         }
 539
 540         req->skb = skb;
 541         req->devinfo = devinfo;
 542         usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->tx_pipe,
 543                           skb->data, skb->len, brcmf_usb_tx_complete, req);
 544         req->urb->transfer_flags |= URB_ZERO_PACKET;
 545         brcmf_usb_enq(devinfo, &devinfo->tx_postq, req, NULL);
 546         ret = usb_submit_urb(req->urb, GFP_ATOMIC);
 547         if (ret) {
 548                 brcmf_err("brcmf_usb_tx usb_submit_urb FAILED\n");
 549                 brcmf_usb_del_fromq(devinfo, req);
 550                 req->skb = NULL;
 551                 brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req,
 552                               &devinfo->tx_freecount);
 553                 goto fail;
 554         }
 555
 556         spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
 557         if (devinfo->tx_freecount < devinfo->tx_low_watermark &&
 558             !devinfo->tx_flowblock) {
 559                 brcmf_txflowblock(dev, true);
 560                 devinfo->tx_flowblock = true;
 561         }
 562         spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
 563         return 0;
 564
 565 fail:
 566         return ret;
 567 }
 568
 569
 570 static int brcmf_usb_up(struct device *dev)
 571 {
 572         struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 573
 574         brcmf_dbg(USB, "Enter\n");
 575         if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP)
 576                 return 0;
 577
 578         /* Success, indicate devinfo is fully up */
 579         brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_UP);
 580
 581         if (devinfo->ctl_urb) {
 582                 devinfo->ctl_in_pipe = usb_rcvctrlpipe(devinfo->usbdev, 0);
 583                 devinfo->ctl_out_pipe = usb_sndctrlpipe(devinfo->usbdev, 0);
 584
 585                 /* CTL Write */
 586                 devinfo->ctl_write.bRequestType =
 587                         USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
 588                 devinfo->ctl_write.bRequest = 0;
 589                 devinfo->ctl_write.wValue = cpu_to_le16(0);
 590                 devinfo->ctl_write.wIndex = cpu_to_le16(devinfo->ifnum);
 591
 592                 /* CTL Read */
 593                 devinfo->ctl_read.bRequestType =
 594                         USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
 595                 devinfo->ctl_read.bRequest = 1;
 596                 devinfo->ctl_read.wValue = cpu_to_le16(0);
 597                 devinfo->ctl_read.wIndex = cpu_to_le16(devinfo->ifnum);
 598         }
 599         brcmf_usb_rx_fill_all(devinfo);
 600         return 0;
 601 }
 602
 603 static void brcmf_usb_down(struct device *dev)
 604 {
 605         struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 606
 607         brcmf_dbg(USB, "Enter\n");
 608         if (devinfo == NULL)
 609                 return;
 610
 611         if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_DOWN)
 612                 return;
 613
 614         brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_DOWN);
 615
 616         if (devinfo->ctl_urb)
 617                 usb_kill_urb(devinfo->ctl_urb);
 618
 619         if (devinfo->bulk_urb)
 620                 usb_kill_urb(devinfo->bulk_urb);
 621         brcmf_usb_free_q(&devinfo->tx_postq, true);
 622
 623         brcmf_usb_free_q(&devinfo->rx_postq, true);
 624 }
 625
 626 static void
 627 brcmf_usb_sync_complete(struct urb *urb)
 628 {
 629         struct brcmf_usbdev_info *devinfo =
 630                         (struct brcmf_usbdev_info *)urb->context;
 631
 632         devinfo->ctl_completed = true;
 633         brcmf_usb_ioctl_resp_wake(devinfo);
 634 }
 635
 636 static int brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd,
 637                             void *buffer, int buflen)
 638 {
 639         int ret;
 640         char *tmpbuf;
 641         u16 size;
 642
 643         if ((!devinfo) || (devinfo->ctl_urb == NULL))
 644                 return -EINVAL;
 645
 646         tmpbuf = kmalloc(buflen, GFP_ATOMIC);
 647         if (!tmpbuf)
 648                 return -ENOMEM;
 649
 650         size = buflen;
 651         devinfo->ctl_urb->transfer_buffer_length = size;
 652
 653         devinfo->ctl_read.wLength = cpu_to_le16p(&size);
 654         devinfo->ctl_read.bRequestType = USB_DIR_IN | USB_TYPE_VENDOR |
 655                 USB_RECIP_INTERFACE;
 656         devinfo->ctl_read.bRequest = cmd;
 657
 658         usb_fill_control_urb(devinfo->ctl_urb,
 659                 devinfo->usbdev,
 660                 usb_rcvctrlpipe(devinfo->usbdev, 0),
 661                 (unsigned char *) &devinfo->ctl_read,
 662                 (void *) tmpbuf, size,
 663                 (usb_complete_t)brcmf_usb_sync_complete, devinfo);
 664
 665         devinfo->ctl_completed = false;
 666         ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
 667         if (ret < 0) {
 668                 brcmf_err("usb_submit_urb failed %d\n", ret);
 669                 goto finalize;
 670         }
 671
 672         if (!brcmf_usb_ioctl_resp_wait(devinfo))
 673                 ret = -ETIMEDOUT;
 674         else
 675                 memcpy(buffer, tmpbuf, buflen);
 676
 677 finalize:
 678         kfree(tmpbuf);
 679         return ret;
 680 }
 681
 682 static bool
 683 brcmf_usb_dlneeded(struct brcmf_usbdev_info *devinfo)
 684 {
 685         struct bootrom_id_le id;
 686         u32 chipid, chiprev;
 687
 688         brcmf_dbg(USB, "Enter\n");
 689
 690         if (devinfo == NULL)
 691                 return false;
 692
 693         /* Check if firmware downloaded already by querying runtime ID */
 694         id.chip = cpu_to_le32(0xDEAD);
 695         brcmf_usb_dl_cmd(devinfo, DL_GETVER, &id, sizeof(id));
 696
 697         chipid = le32_to_cpu(id.chip);
 698         chiprev = le32_to_cpu(id.chiprev);
 699
 700         if ((chipid & 0x4300) == 0x4300)
 701                 brcmf_dbg(USB, "chip %x rev 0x%x\n", chipid, chiprev);
 702         else
 703                 brcmf_dbg(USB, "chip %d rev 0x%x\n", chipid, chiprev);
 704         if (chipid == BRCMF_POSTBOOT_ID) {
 705                 brcmf_dbg(USB, "firmware already downloaded\n");
 706                 brcmf_usb_dl_cmd(devinfo, DL_RESETCFG, &id, sizeof(id));
 707                 return false;
 708         } else {
 709                 devinfo->bus_pub.devid = chipid;
 710                 devinfo->bus_pub.chiprev = chiprev;
 711         }
 712         return true;
 713 }
 714
 715 static int
 716 brcmf_usb_resetcfg(struct brcmf_usbdev_info *devinfo)
 717 {
 718         struct bootrom_id_le id;
 719         u32 loop_cnt;
 720         int err;
 721
 722         brcmf_dbg(USB, "Enter\n");
 723
 724         loop_cnt = 0;
 725         do {
 726                 mdelay(BRCMF_USB_RESET_GETVER_SPINWAIT);
 727                 loop_cnt++;
 728                 id.chip = cpu_to_le32(0xDEAD);       /* Get the ID */
 729                 err = brcmf_usb_dl_cmd(devinfo, DL_GETVER, &id, sizeof(id));
 730                 if ((err) && (err != -ETIMEDOUT))
 731                         return err;
 732                 if (id.chip == cpu_to_le32(BRCMF_POSTBOOT_ID))
 733                         break;
 734         } while (loop_cnt < BRCMF_USB_RESET_GETVER_LOOP_CNT);
 735
 736         if (id.chip == cpu_to_le32(BRCMF_POSTBOOT_ID)) {
 737                 brcmf_dbg(USB, "postboot chip 0x%x/rev 0x%x\n",
 738                           le32_to_cpu(id.chip), le32_to_cpu(id.chiprev));
 739
 740                 brcmf_usb_dl_cmd(devinfo, DL_RESETCFG, &id, sizeof(id));
 741                 return 0;
 742         } else {
 743                 brcmf_err("Cannot talk to Dongle. Firmware is not UP, %d ms\n",
 744                           BRCMF_USB_RESET_GETVER_SPINWAIT * loop_cnt);
 745                 return -EINVAL;
 746         }
 747 }
 748
 749
 750 static int
 751 brcmf_usb_dl_send_bulk(struct brcmf_usbdev_info *devinfo, void *buffer, int len)
 752 {
 753         int ret;
 754
 755         if ((devinfo == NULL) || (devinfo->bulk_urb == NULL))
 756                 return -EINVAL;
 757
 758         /* Prepare the URB */
 759         usb_fill_bulk_urb(devinfo->bulk_urb, devinfo->usbdev,
 760                           devinfo->tx_pipe, buffer, len,
 761                           (usb_complete_t)brcmf_usb_sync_complete, devinfo);
 762
 763         devinfo->bulk_urb->transfer_flags |= URB_ZERO_PACKET;
 764
 765         devinfo->ctl_completed = false;
 766         ret = usb_submit_urb(devinfo->bulk_urb, GFP_ATOMIC);
 767         if (ret) {
 768                 brcmf_err("usb_submit_urb failed %d\n", ret);
 769                 return ret;
 770         }
 771         ret = brcmf_usb_ioctl_resp_wait(devinfo);
 772         return (ret == 0);
 773 }
 774
 775 static int
 776 brcmf_usb_dl_writeimage(struct brcmf_usbdev_info *devinfo, u8 *fw, int fwlen)
 777 {
 778         unsigned int sendlen, sent, dllen;
 779         char *bulkchunk = NULL, *dlpos;
 780         struct rdl_state_le state;
 781         u32 rdlstate, rdlbytes;
 782         int err = 0;
 783
 784         brcmf_dbg(USB, "Enter, fw %p, len %d\n", fw, fwlen);
 785
 786         bulkchunk = kmalloc(RDL_CHUNK, GFP_ATOMIC);
 787         if (bulkchunk == NULL) {
 788                 err = -ENOMEM;
 789                 goto fail;
 790         }
 791
 792         /* 1) Prepare USB boot loader for runtime image */
 793         brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state));
 794
 795         rdlstate = le32_to_cpu(state.state);
 796         rdlbytes = le32_to_cpu(state.bytes);
 797
 798         /* 2) Check we are in the Waiting state */
 799         if (rdlstate != DL_WAITING) {
 800                 brcmf_err("Failed to DL_START\n");
 801                 err = -EINVAL;
 802                 goto fail;
 803         }
 804         sent = 0;
 805         dlpos = fw;
 806         dllen = fwlen;
 807
 808         /* Get chip id and rev */
 809         while (rdlbytes != dllen) {
 810                 /* Wait until the usb device reports it received all
 811                  * the bytes we sent */
 812                 if ((rdlbytes == sent) && (rdlbytes != dllen)) {
 813                         if ((dllen-sent) < RDL_CHUNK)
 814                                 sendlen = dllen-sent;
 815                         else
 816                                 sendlen = RDL_CHUNK;
 817
 818                         /* simply avoid having to send a ZLP by ensuring we
 819                          * never have an even
 820                          * multiple of 64
 821                          */
 822                         if (!(sendlen % 64))
 823                                 sendlen -= 4;
 824
 825                         /* send data */
 826                         memcpy(bulkchunk, dlpos, sendlen);
 827                         if (brcmf_usb_dl_send_bulk(devinfo, bulkchunk,
 828                                                    sendlen)) {
 829                                 brcmf_err("send_bulk failed\n");
 830                                 err = -EINVAL;
 831                                 goto fail;
 832                         }
 833
 834                         dlpos += sendlen;
 835                         sent += sendlen;
 836                 }
 837                 err = brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state,
 838                                        sizeof(state));
 839                 if (err) {
 840                         brcmf_err("DL_GETSTATE Failed\n");
 841                         goto fail;
 842                 }
 843
 844                 rdlstate = le32_to_cpu(state.state);
 845                 rdlbytes = le32_to_cpu(state.bytes);
 846
 847                 /* restart if an error is reported */
 848                 if (rdlstate == DL_BAD_HDR || rdlstate == DL_BAD_CRC) {
 849                         brcmf_err("Bad Hdr or Bad CRC state %d\n",
 850                                   rdlstate);
 851                         err = -EINVAL;
 852                         goto fail;
 853                 }
 854         }
 855
 856 fail:
 857         kfree(bulkchunk);
 858         brcmf_dbg(USB, "Exit, err=%d\n", err);
 859         return err;
 860 }
 861
 862 static int brcmf_usb_dlstart(struct brcmf_usbdev_info *devinfo, u8 *fw, int len)
 863 {
 864         int err;
 865
 866         brcmf_dbg(USB, "Enter\n");
 867
 868         if (devinfo == NULL)
 869                 return -EINVAL;
 870
 871         if (devinfo->bus_pub.devid == 0xDEAD)
 872                 return -EINVAL;
 873
 874         err = brcmf_usb_dl_writeimage(devinfo, fw, len);
 875         if (err == 0)
 876                 devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DL_DONE;
 877         else
 878                 devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DL_FAIL;
 879         brcmf_dbg(USB, "Exit, err=%d\n", err);
 880
 881         return err;
 882 }
 883
 884 static int brcmf_usb_dlrun(struct brcmf_usbdev_info *devinfo)
 885 {
 886         struct rdl_state_le state;
 887
 888         brcmf_dbg(USB, "Enter\n");
 889         if (!devinfo)
 890                 return -EINVAL;
 891
 892         if (devinfo->bus_pub.devid == 0xDEAD)
 893                 return -EINVAL;
 894
 895         /* Check we are runnable */
 896         state.state = 0;
 897         brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state, sizeof(state));
 898
 899         /* Start the image */
 900         if (state.state == cpu_to_le32(DL_RUNNABLE)) {
 901                 if (brcmf_usb_dl_cmd(devinfo, DL_GO, &state, sizeof(state)))
 902                         return -ENODEV;
 903                 if (brcmf_usb_resetcfg(devinfo))
 904                         return -ENODEV;
 905                 /* The Dongle may go for re-enumeration. */
 906         } else {
 907                 brcmf_err("Dongle not runnable\n");
 908                 return -EINVAL;
 909         }
 910         brcmf_dbg(USB, "Exit\n");
 911         return 0;
 912 }
 913
 914 static bool brcmf_usb_chip_support(int chipid, int chiprev)
 915 {
 916         switch(chipid) {
 917         case BRCM_CC_43143_CHIP_ID:
 918                 return true;
 919         case BRCM_CC_43235_CHIP_ID:
 920         case BRCM_CC_43236_CHIP_ID:
 921         case BRCM_CC_43238_CHIP_ID:
 922                 return (chiprev == 3);
 923         case BRCM_CC_43242_CHIP_ID:
 924                 return true;
 925         case BRCM_CC_43566_CHIP_ID:
 926         case BRCM_CC_43569_CHIP_ID:
 927                 return true;
 928         default:
 929                 break;
 930         }
 931         return false;
 932 }
 933
 934 static int
 935 brcmf_usb_fw_download(struct brcmf_usbdev_info *devinfo)
 936 {
 937         int devid, chiprev;
 938         int err;
 939
 940         brcmf_dbg(USB, "Enter\n");
 941         if (devinfo == NULL)
 942                 return -ENODEV;
 943
 944         devid = devinfo->bus_pub.devid;
 945         chiprev = devinfo->bus_pub.chiprev;
 946
 947         if (!brcmf_usb_chip_support(devid, chiprev)) {
 948                 brcmf_err("unsupported chip %d rev %d\n",
 949                           devid, chiprev);
 950                 return -EINVAL;
 951         }
 952
 953         if (!devinfo->image) {
 954                 brcmf_err("No firmware!\n");
 955                 return -ENOENT;
 956         }
 957
 958         err = brcmf_usb_dlstart(devinfo,
 959                 (u8 *)devinfo->image, devinfo->image_len);
 960         if (err == 0)
 961                 err = brcmf_usb_dlrun(devinfo);
 962         return err;
 963 }
 964
 965
 966 static void brcmf_usb_detach(struct brcmf_usbdev_info *devinfo)
 967 {
 968         brcmf_dbg(USB, "Enter, devinfo %p\n", devinfo);
 969
 970         /* free the URBS */
 971         brcmf_usb_free_q(&devinfo->rx_freeq, false);
 972         brcmf_usb_free_q(&devinfo->tx_freeq, false);
 973
 974         usb_free_urb(devinfo->ctl_urb);
 975         usb_free_urb(devinfo->bulk_urb);
 976
 977         kfree(devinfo->tx_reqs);
 978         kfree(devinfo->rx_reqs);
 979 }
 980
 981 #define TRX_MAGIC       0x30524448      /* "HDR0" */
 982 #define TRX_VERSION     1               /* Version 1 */
 983 #define TRX_MAX_LEN     0x3B0000        /* Max length */
 984 #define TRX_NO_HEADER   1               /* Do not write TRX header */
 985 #define TRX_MAX_OFFSET  3               /* Max number of individual files */
 986 #define TRX_UNCOMP_IMAGE        0x20    /* Trx contains uncompressed image */
 987
 988 struct trx_header_le {
 989         __le32 magic;           /* "HDR0" */
 990         __le32 len;             /* Length of file including header */
 991         __le32 crc32;           /* CRC from flag_version to end of file */
 992         __le32 flag_version;    /* 0:15 flags, 16:31 version */
 993         __le32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of
 994                                          * header */
 995 };
 996
 997 static int check_file(const u8 *headers)
 998 {
 999         struct trx_header_le *trx;
1000         int actual_len = -1;
1001
1002         brcmf_dbg(USB, "Enter\n");
1003         /* Extract trx header */
1004         trx = (struct trx_header_le *) headers;
1005         if (trx->magic != cpu_to_le32(TRX_MAGIC))
1006                 return -1;
1007
1008         headers += sizeof(struct trx_header_le);
1009
1010         if (le32_to_cpu(trx->flag_version) & TRX_UNCOMP_IMAGE) {
1011                 actual_len = le32_to_cpu(trx->offsets[TRX_OFFSETS_DLFWLEN_IDX]);
1012                 return actual_len + sizeof(struct trx_header_le);
1013         }
1014         return -1;
1015 }
1016
1017 static const char *brcmf_usb_get_fwname(struct brcmf_usbdev_info *devinfo)
1018 {
1019         switch (devinfo->bus_pub.devid) {
1020         case BRCM_CC_43143_CHIP_ID:
1021                 return BRCMF_USB_43143_FW_NAME;
1022         case BRCM_CC_43235_CHIP_ID:
1023         case BRCM_CC_43236_CHIP_ID:
1024         case BRCM_CC_43238_CHIP_ID:
1025                 return BRCMF_USB_43236_FW_NAME;
1026         case BRCM_CC_43242_CHIP_ID:
1027                 return BRCMF_USB_43242_FW_NAME;
1028         case BRCM_CC_43566_CHIP_ID:
1029         case BRCM_CC_43569_CHIP_ID:
1030                 return BRCMF_USB_43569_FW_NAME;
1031         default:
1032                 return NULL;
1033         }
1034 }
1035
1036
1037 static
1038 struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo,
1039                                       int nrxq, int ntxq)
1040 {
1041         brcmf_dbg(USB, "Enter\n");
1042
1043         devinfo->bus_pub.nrxq = nrxq;
1044         devinfo->rx_low_watermark = nrxq / 2;
1045         devinfo->bus_pub.devinfo = devinfo;
1046         devinfo->bus_pub.ntxq = ntxq;
1047         devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DOWN;
1048
1049         /* flow control when too many tx urbs posted */
1050         devinfo->tx_low_watermark = ntxq / 4;
1051         devinfo->tx_high_watermark = devinfo->tx_low_watermark * 3;
1052         devinfo->bus_pub.bus_mtu = BRCMF_USB_MAX_PKT_SIZE;
1053
1054         /* Initialize other structure content */
1055         init_waitqueue_head(&devinfo->ioctl_resp_wait);
1056
1057         /* Initialize the spinlocks */
1058         spin_lock_init(&devinfo->qlock);
1059         spin_lock_init(&devinfo->tx_flowblock_lock);
1060
1061         INIT_LIST_HEAD(&devinfo->rx_freeq);
1062         INIT_LIST_HEAD(&devinfo->rx_postq);
1063
1064         INIT_LIST_HEAD(&devinfo->tx_freeq);
1065         INIT_LIST_HEAD(&devinfo->tx_postq);
1066
1067         devinfo->tx_flowblock = false;
1068
1069         devinfo->rx_reqs = brcmf_usbdev_qinit(&devinfo->rx_freeq, nrxq);
1070         if (!devinfo->rx_reqs)
1071                 goto error;
1072
1073         devinfo->tx_reqs = brcmf_usbdev_qinit(&devinfo->tx_freeq, ntxq);
1074         if (!devinfo->tx_reqs)
1075                 goto error;
1076         devinfo->tx_freecount = ntxq;
1077
1078         devinfo->ctl_urb = usb_alloc_urb(0, GFP_ATOMIC);
1079         if (!devinfo->ctl_urb) {
1080                 brcmf_err("usb_alloc_urb (ctl) failed\n");
1081                 goto error;
1082         }
1083         devinfo->bulk_urb = usb_alloc_urb(0, GFP_ATOMIC);
1084         if (!devinfo->bulk_urb) {
1085                 brcmf_err("usb_alloc_urb (bulk) failed\n");
1086                 goto error;
1087         }
1088
1089         return &devinfo->bus_pub;
1090
1091 error:
1092         brcmf_err("failed!\n");
1093         brcmf_usb_detach(devinfo);
1094         return NULL;
1095 }
1096
1097 static struct brcmf_bus_ops brcmf_usb_bus_ops = {
1098         .txdata = brcmf_usb_tx,
1099         .stop = brcmf_usb_down,
1100         .txctl = brcmf_usb_tx_ctlpkt,
1101         .rxctl = brcmf_usb_rx_ctlpkt,
1102 };
1103
1104 static int brcmf_usb_bus_setup(struct brcmf_usbdev_info *devinfo)
1105 {
1106         int ret;
1107
1108         /* Attach to the common driver interface */
1109         ret = brcmf_attach(devinfo->dev);
1110         if (ret) {
1111                 brcmf_err("brcmf_attach failed\n");
1112                 return ret;
1113         }
1114
1115         ret = brcmf_usb_up(devinfo->dev);
1116         if (ret)
1117                 goto fail;
1118
1119         ret = brcmf_bus_start(devinfo->dev);
1120         if (ret)
1121                 goto fail;
1122
1123         return 0;
1124 fail:
1125         brcmf_detach(devinfo->dev);
1126         return ret;
1127 }
1128
1129 static void brcmf_usb_probe_phase2(struct device *dev,
1130                                    const struct firmware *fw,
1131                                    void *nvram, u32 nvlen)
1132 {
1133         struct brcmf_bus *bus = dev_get_drvdata(dev);
1134         struct brcmf_usbdev_info *devinfo;
1135         int ret;
1136
1137         brcmf_dbg(USB, "Start fw downloading\n");
1138         ret = check_file(fw->data);
1139         if (ret < 0) {
1140                 brcmf_err("invalid firmware\n");
1141                 release_firmware(fw);
1142                 goto error;
1143         }
1144
1145         devinfo = bus->bus_priv.usb->devinfo;
1146         devinfo->image = fw->data;
1147         devinfo->image_len = fw->size;
1148
1149         ret = brcmf_usb_fw_download(devinfo);
1150         release_firmware(fw);
1151         if (ret)
1152                 goto error;
1153
1154         ret = brcmf_usb_bus_setup(devinfo);
1155         if (ret)
1156                 goto error;
1157
1158         return;
1159 error:
1160         brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), ret);
1161         device_release_driver(dev);
1162 }
1163
1164 static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
1165 {
1166         struct brcmf_bus *bus = NULL;
1167         struct brcmf_usbdev *bus_pub = NULL;
1168         struct device *dev = devinfo->dev;
1169         int ret;
1170
1171         brcmf_dbg(USB, "Enter\n");
1172         bus_pub = brcmf_usb_attach(devinfo, BRCMF_USB_NRXQ, BRCMF_USB_NTXQ);
1173         if (!bus_pub)
1174                 return -ENODEV;
1175
1176         bus = kzalloc(sizeof(struct brcmf_bus), GFP_ATOMIC);
1177         if (!bus) {
1178                 ret = -ENOMEM;
1179                 goto fail;
1180         }
1181
1182         bus->dev = dev;
1183         bus_pub->bus = bus;
1184         bus->bus_priv.usb = bus_pub;
1185         dev_set_drvdata(dev, bus);
1186         bus->ops = &brcmf_usb_bus_ops;
1187         bus->proto_type = BRCMF_PROTO_BCDC;
1188         bus->always_use_fws_queue = true;
1189
1190         if (!brcmf_usb_dlneeded(devinfo)) {
1191                 ret = brcmf_usb_bus_setup(devinfo);
1192                 if (ret)
1193                         goto fail;
1194         }
1195         bus->chip = bus_pub->devid;
1196         bus->chiprev = bus_pub->chiprev;
1197
1198         /* request firmware here */
1199         brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
1200                                brcmf_usb_probe_phase2);
1201         return 0;
1202
1203 fail:
1204         /* Release resources in reverse order */
1205         kfree(bus);
1206         brcmf_usb_detach(devinfo);
1207         return ret;
1208 }
1209
1210 static void
1211 brcmf_usb_disconnect_cb(struct brcmf_usbdev_info *devinfo)
1212 {
1213         if (!devinfo)
1214                 return;
1215         brcmf_dbg(USB, "Enter, bus_pub %p\n", devinfo);
1216
1217         brcmf_detach(devinfo->dev);
1218         kfree(devinfo->bus_pub.bus);
1219         brcmf_usb_detach(devinfo);
1220 }
1221
1222 static int
1223 brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
1224 {
1225         struct usb_device *usb = interface_to_usbdev(intf);
1226         struct brcmf_usbdev_info *devinfo;
1227         struct usb_interface_descriptor *desc;
1228         struct usb_endpoint_descriptor *endpoint;
1229         int ret = 0;
1230         u32 num_of_eps;
1231         u8 endpoint_num, ep;
1232
1233         brcmf_dbg(USB, "Enter 0x%04x:0x%04x\n", id->idVendor, id->idProduct);
1234
1235         devinfo = kzalloc(sizeof(*devinfo), GFP_ATOMIC);
1236         if (devinfo == NULL)
1237                 return -ENOMEM;
1238
1239         devinfo->usbdev = usb;
1240         devinfo->dev = &usb->dev;
1241         usb_set_intfdata(intf, devinfo);
1242
1243         /* Check that the device supports only one configuration */
1244         if (usb->descriptor.bNumConfigurations != 1) {
1245                 brcmf_err("Number of configurations: %d not supported\n",
1246                           usb->descriptor.bNumConfigurations);
1247                 ret = -ENODEV;
1248                 goto fail;
1249         }
1250
1251         if ((usb->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) &&
1252             (usb->descriptor.bDeviceClass != USB_CLASS_MISC) &&
1253             (usb->descriptor.bDeviceClass != USB_CLASS_WIRELESS_CONTROLLER)) {
1254                 brcmf_err("Device class: 0x%x not supported\n",
1255                           usb->descriptor.bDeviceClass);
1256                 ret = -ENODEV;
1257                 goto fail;
1258         }
1259
1260         desc = &intf->altsetting[0].desc;
1261         if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
1262             (desc->bInterfaceSubClass != 2) ||
1263             (desc->bInterfaceProtocol != 0xff)) {
1264                 brcmf_err("non WLAN interface %d: 0x%x:0x%x:0x%x\n",
1265                           desc->bInterfaceNumber, desc->bInterfaceClass,
1266                           desc->bInterfaceSubClass, desc->bInterfaceProtocol);
1267                 ret = -ENODEV;
1268                 goto fail;
1269         }
1270
1271         num_of_eps = desc->bNumEndpoints;
1272         for (ep = 0; ep < num_of_eps; ep++) {
1273                 endpoint = &intf->altsetting[0].endpoint[ep].desc;
1274                 endpoint_num = usb_endpoint_num(endpoint);
1275                 if (!usb_endpoint_xfer_bulk(endpoint))
1276                         continue;
1277                 if (usb_endpoint_dir_in(endpoint)) {
1278                         if (!devinfo->rx_pipe)
1279                                 devinfo->rx_pipe =
1280                                         usb_rcvbulkpipe(usb, endpoint_num);
1281                 } else {
1282                         if (!devinfo->tx_pipe)
1283                                 devinfo->tx_pipe =
1284                                         usb_sndbulkpipe(usb, endpoint_num);
1285                 }
1286         }
1287         if (devinfo->rx_pipe == 0) {
1288                 brcmf_err("No RX (in) Bulk EP found\n");
1289                 ret = -ENODEV;
1290                 goto fail;
1291         }
1292         if (devinfo->tx_pipe == 0) {
1293                 brcmf_err("No TX (out) Bulk EP found\n");
1294                 ret = -ENODEV;
1295                 goto fail;
1296         }
1297
1298         devinfo->ifnum = desc->bInterfaceNumber;
1299
1300         if (usb->speed == USB_SPEED_SUPER)
1301                 brcmf_dbg(USB, "Broadcom super speed USB WLAN interface detected\n");
1302         else if (usb->speed == USB_SPEED_HIGH)
1303                 brcmf_dbg(USB, "Broadcom high speed USB WLAN interface detected\n");
1304         else
1305                 brcmf_dbg(USB, "Broadcom full speed USB WLAN interface detected\n");
1306
1307         ret = brcmf_usb_probe_cb(devinfo);
1308         if (ret)
1309                 goto fail;
1310
1311         /* Success */
1312         return 0;
1313
1314 fail:
1315         kfree(devinfo);
1316         usb_set_intfdata(intf, NULL);
1317         return ret;
1318 }
1319
1320 static void
1321 brcmf_usb_disconnect(struct usb_interface *intf)
1322 {
1323         struct brcmf_usbdev_info *devinfo;
1324
1325         brcmf_dbg(USB, "Enter\n");
1326         devinfo = (struct brcmf_usbdev_info *)usb_get_intfdata(intf);
1327         brcmf_usb_disconnect_cb(devinfo);
1328         kfree(devinfo);
1329         brcmf_dbg(USB, "Exit\n");
1330 }
1331
1332 /*
1333  * only need to signal the bus being down and update the state.
1334  */
1335 static int brcmf_usb_suspend(struct usb_interface *intf, pm_message_t state)
1336 {
1337         struct usb_device *usb = interface_to_usbdev(intf);
1338         struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
1339
1340         brcmf_dbg(USB, "Enter\n");
1341         devinfo->bus_pub.state = BRCMFMAC_USB_STATE_SLEEP;
1342         brcmf_detach(&usb->dev);
1343         return 0;
1344 }
1345
1346 /*
1347  * (re-) start the bus.
1348  */
1349 static int brcmf_usb_resume(struct usb_interface *intf)
1350 {
1351         struct usb_device *usb = interface_to_usbdev(intf);
1352         struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
1353
1354         brcmf_dbg(USB, "Enter\n");
1355         return brcmf_usb_bus_setup(devinfo);
1356 }
1357
1358 static int brcmf_usb_reset_resume(struct usb_interface *intf)
1359 {
1360         struct usb_device *usb = interface_to_usbdev(intf);
1361         struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
1362
1363         brcmf_dbg(USB, "Enter\n");
1364
1365         return brcmf_fw_get_firmwares(&usb->dev, 0,
1366                                       brcmf_usb_get_fwname(devinfo), NULL,
1367                                       brcmf_usb_probe_phase2);
1368 }
1369
1370 #define BRCMF_USB_DEVICE(dev_id)        \
1371         { USB_DEVICE(BRCM_USB_VENDOR_ID_BROADCOM, dev_id) }
1372
1373 static struct usb_device_id brcmf_usb_devid_table[] = {
1374         BRCMF_USB_DEVICE(BRCM_USB_43143_DEVICE_ID),
1375         BRCMF_USB_DEVICE(BRCM_USB_43236_DEVICE_ID),
1376         BRCMF_USB_DEVICE(BRCM_USB_43242_DEVICE_ID),
1377         BRCMF_USB_DEVICE(BRCM_USB_43569_DEVICE_ID),
1378         /* special entry for device with firmware loaded and running */
1379         BRCMF_USB_DEVICE(BRCM_USB_BCMFW_DEVICE_ID),
1380         { /* end: all zeroes */ }
1381 };
1382
1383 MODULE_DEVICE_TABLE(usb, brcmf_usb_devid_table);
1384 MODULE_FIRMWARE(BRCMF_USB_43143_FW_NAME);
1385 MODULE_FIRMWARE(BRCMF_USB_43236_FW_NAME);
1386 MODULE_FIRMWARE(BRCMF_USB_43242_FW_NAME);
1387 MODULE_FIRMWARE(BRCMF_USB_43569_FW_NAME);
1388
1389 static struct usb_driver brcmf_usbdrvr = {
1390         .name = KBUILD_MODNAME,
1391         .probe = brcmf_usb_probe,
1392         .disconnect = brcmf_usb_disconnect,
1393         .id_table = brcmf_usb_devid_table,
1394         .suspend = brcmf_usb_suspend,
1395         .resume = brcmf_usb_resume,
1396         .reset_resume = brcmf_usb_reset_resume,
1397         .supports_autosuspend = 1,
1398         .disable_hub_initiated_lpm = 1,
1399 };
1400
1401 static int brcmf_usb_reset_device(struct device *dev, void *notused)
1402 {
1403         /* device past is the usb interface so we
1404          * need to use parent here.
1405          */
1406         brcmf_dev_reset(dev->parent);
1407         return 0;
1408 }
1409
1410 void brcmf_usb_exit(void)
1411 {
1412         struct device_driver *drv = &brcmf_usbdrvr.drvwrap.driver;
1413         int ret;
1414
1415         brcmf_dbg(USB, "Enter\n");
1416         ret = driver_for_each_device(drv, NULL, NULL,
1417                                      brcmf_usb_reset_device);
1418         usb_deregister(&brcmf_usbdrvr);
1419 }
1420
1421 void brcmf_usb_register(void)
1422 {
1423         brcmf_dbg(USB, "Enter\n");
1424         usb_register(&brcmf_usbdrvr);
1425 }