drivers/net/wireless/broadcom/b43/phy_common.c

   1 /*
   2
   3   Broadcom B43 wireless driver
   4   Common PHY routines
   5
   6   Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
   7   Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it>
   8   Copyright (c) 2005-2008 Michael Buesch <m@bues.ch>
   9   Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org>
  10   Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch>
  11
  12   This program is free software; you can redistribute it and/or modify
  13   it under the terms of the GNU General Public License as published by
  14   the Free Software Foundation; either version 2 of the License, or
  15   (at your option) any later version.
  16
  17   This program is distributed in the hope that it will be useful,
  18   but WITHOUT ANY WARRANTY; without even the implied warranty of
  19   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20   GNU General Public License for more details.
  21
  22   You should have received a copy of the GNU General Public License
  23   along with this program; see the file COPYING.  If not, write to
  24   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
  25   Boston, MA 02110-1301, USA.
  26
  27 */
  28
  29 #include "phy_common.h"
  30 #include "phy_g.h"
  31 #include "phy_a.h"
  32 #include "phy_n.h"
  33 #include "phy_lp.h"
  34 #include "phy_ht.h"
  35 #include "phy_lcn.h"
  36 #include "phy_ac.h"
  37 #include "b43.h"
  38 #include "main.h"
  39
  40
  41 int b43_phy_allocate(struct b43_wldev *dev)
  42 {
  43         struct b43_phy *phy = &(dev->phy);
  44         int err;
  45
  46         phy->ops = NULL;
  47
  48         switch (phy->type) {
  49         case B43_PHYTYPE_G:
  50 #ifdef CONFIG_B43_PHY_G
  51                 phy->ops = &b43_phyops_g;
  52 #endif
  53                 break;
  54         case B43_PHYTYPE_N:
  55 #ifdef CONFIG_B43_PHY_N
  56                 phy->ops = &b43_phyops_n;
  57 #endif
  58                 break;
  59         case B43_PHYTYPE_LP:
  60 #ifdef CONFIG_B43_PHY_LP
  61                 phy->ops = &b43_phyops_lp;
  62 #endif
  63                 break;
  64         case B43_PHYTYPE_HT:
  65 #ifdef CONFIG_B43_PHY_HT
  66                 phy->ops = &b43_phyops_ht;
  67 #endif
  68                 break;
  69         case B43_PHYTYPE_LCN:
  70 #ifdef CONFIG_B43_PHY_LCN
  71                 phy->ops = &b43_phyops_lcn;
  72 #endif
  73                 break;
  74         case B43_PHYTYPE_AC:
  75 #ifdef CONFIG_B43_PHY_AC
  76                 phy->ops = &b43_phyops_ac;
  77 #endif
  78                 break;
  79         }
  80         if (B43_WARN_ON(!phy->ops))
  81                 return -ENODEV;
  82
  83         err = phy->ops->allocate(dev);
  84         if (err)
  85                 phy->ops = NULL;
  86
  87         return err;
  88 }
  89
  90 void b43_phy_free(struct b43_wldev *dev)
  91 {
  92         dev->phy.ops->free(dev);
  93         dev->phy.ops = NULL;
  94 }
  95
  96 int b43_phy_init(struct b43_wldev *dev)
  97 {
  98         struct b43_phy *phy = &dev->phy;
  99         const struct b43_phy_operations *ops = phy->ops;
 100         int err;
 101
 102         /* During PHY init we need to use some channel. On the first init this
 103          * function is called *before* b43_op_config, so our pointer is NULL.
 104          */
 105         if (!phy->chandef) {
 106                 phy->chandef = &dev->wl->hw->conf.chandef;
 107                 phy->channel = phy->chandef->chan->hw_value;
 108         }
 109
 110         phy->ops->switch_analog(dev, true);
 111         b43_software_rfkill(dev, false);
 112
 113         err = ops->init(dev);
 114         if (err) {
 115                 b43err(dev->wl, "PHY init failed\n");
 116                 goto err_block_rf;
 117         }
 118         phy->do_full_init = false;
 119
 120         err = b43_switch_channel(dev, phy->channel);
 121         if (err) {
 122                 b43err(dev->wl, "PHY init: Channel switch to default failed\n");
 123                 goto err_phy_exit;
 124         }
 125
 126         return 0;
 127
 128 err_phy_exit:
 129         phy->do_full_init = true;
 130         if (ops->exit)
 131                 ops->exit(dev);
 132 err_block_rf:
 133         b43_software_rfkill(dev, true);
 134
 135         return err;
 136 }
 137
 138 void b43_phy_exit(struct b43_wldev *dev)
 139 {
 140         const struct b43_phy_operations *ops = dev->phy.ops;
 141
 142         b43_software_rfkill(dev, true);
 143         dev->phy.do_full_init = true;
 144         if (ops->exit)
 145                 ops->exit(dev);
 146 }
 147
 148 bool b43_has_hardware_pctl(struct b43_wldev *dev)
 149 {
 150         if (!dev->phy.hardware_power_control)
 151                 return false;
 152         if (!dev->phy.ops->supports_hwpctl)
 153                 return false;
 154         return dev->phy.ops->supports_hwpctl(dev);
 155 }
 156
 157 void b43_radio_lock(struct b43_wldev *dev)
 158 {
 159         u32 macctl;
 160
 161 #if B43_DEBUG
 162         B43_WARN_ON(dev->phy.radio_locked);
 163         dev->phy.radio_locked = true;
 164 #endif
 165
 166         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 167         macctl |= B43_MACCTL_RADIOLOCK;
 168         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 169         /* Commit the write and wait for the firmware
 170          * to finish any radio register access. */
 171         b43_read32(dev, B43_MMIO_MACCTL);
 172         udelay(10);
 173 }
 174
 175 void b43_radio_unlock(struct b43_wldev *dev)
 176 {
 177         u32 macctl;
 178
 179 #if B43_DEBUG
 180         B43_WARN_ON(!dev->phy.radio_locked);
 181         dev->phy.radio_locked = false;
 182 #endif
 183
 184         /* Commit any write */
 185         b43_read16(dev, B43_MMIO_PHY_VER);
 186         /* unlock */
 187         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 188         macctl &= ~B43_MACCTL_RADIOLOCK;
 189         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 190 }
 191
 192 void b43_phy_lock(struct b43_wldev *dev)
 193 {
 194 #if B43_DEBUG
 195         B43_WARN_ON(dev->phy.phy_locked);
 196         dev->phy.phy_locked = true;
 197 #endif
 198         B43_WARN_ON(dev->dev->core_rev < 3);
 199
 200         if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
 201                 b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
 202 }
 203
 204 void b43_phy_unlock(struct b43_wldev *dev)
 205 {
 206 #if B43_DEBUG
 207         B43_WARN_ON(!dev->phy.phy_locked);
 208         dev->phy.phy_locked = false;
 209 #endif
 210         B43_WARN_ON(dev->dev->core_rev < 3);
 211
 212         if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
 213                 b43_power_saving_ctl_bits(dev, 0);
 214 }
 215
 216 static inline void assert_mac_suspended(struct b43_wldev *dev)
 217 {
 218         if (!B43_DEBUG)
 219                 return;
 220         if ((b43_status(dev) >= B43_STAT_INITIALIZED) &&
 221             (dev->mac_suspended <= 0)) {
 222                 b43dbg(dev->wl, "PHY/RADIO register access with "
 223                        "enabled MAC.\n");
 224                 dump_stack();
 225         }
 226 }
 227
 228 u16 b43_radio_read(struct b43_wldev *dev, u16 reg)
 229 {
 230         assert_mac_suspended(dev);
 231         dev->phy.writes_counter = 0;
 232         return dev->phy.ops->radio_read(dev, reg);
 233 }
 234
 235 void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
 236 {
 237         assert_mac_suspended(dev);
 238         if (b43_bus_host_is_pci(dev->dev) &&
 239             ++dev->phy.writes_counter > B43_MAX_WRITES_IN_ROW) {
 240                 b43_read32(dev, B43_MMIO_MACCTL);
 241                 dev->phy.writes_counter = 1;
 242         }
 243         dev->phy.ops->radio_write(dev, reg, value);
 244 }
 245
 246 void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask)
 247 {
 248         b43_radio_write16(dev, offset,
 249                           b43_radio_read16(dev, offset) & mask);
 250 }
 251
 252 void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set)
 253 {
 254         b43_radio_write16(dev, offset,
 255                           b43_radio_read16(dev, offset) | set);
 256 }
 257
 258 void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
 259 {
 260         b43_radio_write16(dev, offset,
 261                           (b43_radio_read16(dev, offset) & mask) | set);
 262 }
 263
 264 bool b43_radio_wait_value(struct b43_wldev *dev, u16 offset, u16 mask,
 265                           u16 value, int delay, int timeout)
 266 {
 267         u16 val;
 268         int i;
 269
 270         for (i = 0; i < timeout; i += delay) {
 271                 val = b43_radio_read(dev, offset);
 272                 if ((val & mask) == value)
 273                         return true;
 274                 udelay(delay);
 275         }
 276         return false;
 277 }
 278
 279 u16 b43_phy_read(struct b43_wldev *dev, u16 reg)
 280 {
 281         assert_mac_suspended(dev);
 282         dev->phy.writes_counter = 0;
 283
 284         if (dev->phy.ops->phy_read)
 285                 return dev->phy.ops->phy_read(dev, reg);
 286
 287         b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg);
 288         return b43_read16(dev, B43_MMIO_PHY_DATA);
 289 }
 290
 291 void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value)
 292 {
 293         assert_mac_suspended(dev);
 294         if (b43_bus_host_is_pci(dev->dev) &&
 295             ++dev->phy.writes_counter > B43_MAX_WRITES_IN_ROW) {
 296                 b43_read16(dev, B43_MMIO_PHY_VER);
 297                 dev->phy.writes_counter = 1;
 298         }
 299
 300         if (dev->phy.ops->phy_write)
 301                 return dev->phy.ops->phy_write(dev, reg, value);
 302
 303         b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg);
 304         b43_write16(dev, B43_MMIO_PHY_DATA, value);
 305 }
 306
 307 void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg)
 308 {
 309         b43_phy_write(dev, destreg, b43_phy_read(dev, srcreg));
 310 }
 311
 312 void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
 313 {
 314         if (dev->phy.ops->phy_maskset) {
 315                 assert_mac_suspended(dev);
 316                 dev->phy.ops->phy_maskset(dev, offset, mask, 0);
 317         } else {
 318                 b43_phy_write(dev, offset,
 319                               b43_phy_read(dev, offset) & mask);
 320         }
 321 }
 322
 323 void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set)
 324 {
 325         if (dev->phy.ops->phy_maskset) {
 326                 assert_mac_suspended(dev);
 327                 dev->phy.ops->phy_maskset(dev, offset, 0xFFFF, set);
 328         } else {
 329                 b43_phy_write(dev, offset,
 330                               b43_phy_read(dev, offset) | set);
 331         }
 332 }
 333
 334 void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
 335 {
 336         if (dev->phy.ops->phy_maskset) {
 337                 assert_mac_suspended(dev);
 338                 dev->phy.ops->phy_maskset(dev, offset, mask, set);
 339         } else {
 340                 b43_phy_write(dev, offset,
 341                               (b43_phy_read(dev, offset) & mask) | set);
 342         }
 343 }
 344
 345 void b43_phy_put_into_reset(struct b43_wldev *dev)
 346 {
 347         u32 tmp;
 348
 349         switch (dev->dev->bus_type) {
 350 #ifdef CONFIG_B43_BCMA
 351         case B43_BUS_BCMA:
 352                 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
 353                 tmp &= ~B43_BCMA_IOCTL_GMODE;
 354                 tmp |= B43_BCMA_IOCTL_PHY_RESET;
 355                 tmp |= BCMA_IOCTL_FGC;
 356                 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
 357                 udelay(1);
 358
 359                 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
 360                 tmp &= ~BCMA_IOCTL_FGC;
 361                 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
 362                 udelay(1);
 363                 break;
 364 #endif
 365 #ifdef CONFIG_B43_SSB
 366         case B43_BUS_SSB:
 367                 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
 368                 tmp &= ~B43_TMSLOW_GMODE;
 369                 tmp |= B43_TMSLOW_PHYRESET;
 370                 tmp |= SSB_TMSLOW_FGC;
 371                 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
 372                 usleep_range(1000, 2000);
 373
 374                 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
 375                 tmp &= ~SSB_TMSLOW_FGC;
 376                 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
 377                 usleep_range(1000, 2000);
 378
 379                 break;
 380 #endif
 381         }
 382 }
 383
 384 void b43_phy_take_out_of_reset(struct b43_wldev *dev)
 385 {
 386         u32 tmp;
 387
 388         switch (dev->dev->bus_type) {
 389 #ifdef CONFIG_B43_BCMA
 390         case B43_BUS_BCMA:
 391                 /* Unset reset bit (with forcing clock) */
 392                 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
 393                 tmp &= ~B43_BCMA_IOCTL_PHY_RESET;
 394                 tmp &= ~B43_BCMA_IOCTL_PHY_CLKEN;
 395                 tmp |= BCMA_IOCTL_FGC;
 396                 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
 397                 udelay(1);
 398
 399                 /* Do not force clock anymore */
 400                 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
 401                 tmp &= ~BCMA_IOCTL_FGC;
 402                 tmp |= B43_BCMA_IOCTL_PHY_CLKEN;
 403                 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
 404                 udelay(1);
 405                 break;
 406 #endif
 407 #ifdef CONFIG_B43_SSB
 408         case B43_BUS_SSB:
 409                 /* Unset reset bit (with forcing clock) */
 410                 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
 411                 tmp &= ~B43_TMSLOW_PHYRESET;
 412                 tmp &= ~B43_TMSLOW_PHYCLKEN;
 413                 tmp |= SSB_TMSLOW_FGC;
 414                 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
 415                 ssb_read32(dev->dev->sdev, SSB_TMSLOW); /* flush */
 416                 usleep_range(1000, 2000);
 417
 418                 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
 419                 tmp &= ~SSB_TMSLOW_FGC;
 420                 tmp |= B43_TMSLOW_PHYCLKEN;
 421                 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
 422                 ssb_read32(dev->dev->sdev, SSB_TMSLOW); /* flush */
 423                 usleep_range(1000, 2000);
 424                 break;
 425 #endif
 426         }
 427 }
 428
 429 int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel)
 430 {
 431         struct b43_phy *phy = &(dev->phy);
 432         u16 channelcookie, savedcookie;
 433         int err;
 434
 435         /* First we set the channel radio code to prevent the
 436          * firmware from sending ghost packets.
 437          */
 438         channelcookie = new_channel;
 439         if (b43_current_band(dev->wl) == NL80211_BAND_5GHZ)
 440                 channelcookie |= B43_SHM_SH_CHAN_5GHZ;
 441         /* FIXME: set 40Mhz flag if required */
 442         if (0)
 443                 channelcookie |= B43_SHM_SH_CHAN_40MHZ;
 444         savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN);
 445         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie);
 446
 447         /* Now try to switch the PHY hardware channel. */
 448         err = phy->ops->switch_channel(dev, new_channel);
 449         if (err)
 450                 goto err_restore_cookie;
 451
 452         /* Wait for the radio to tune to the channel and stabilize. */
 453         msleep(8);
 454
 455         return 0;
 456
 457 err_restore_cookie:
 458         b43_shm_write16(dev, B43_SHM_SHARED,
 459                         B43_SHM_SH_CHAN, savedcookie);
 460
 461         return err;
 462 }
 463
 464 void b43_software_rfkill(struct b43_wldev *dev, bool blocked)
 465 {
 466         struct b43_phy *phy = &dev->phy;
 467
 468         b43_mac_suspend(dev);
 469         phy->ops->software_rfkill(dev, blocked);
 470         phy->radio_on = !blocked;
 471         b43_mac_enable(dev);
 472 }
 473
 474 /**
 475  * b43_phy_txpower_adjust_work - TX power workqueue.
 476  *
 477  * Workqueue for updating the TX power parameters in hardware.
 478  */
 479 void b43_phy_txpower_adjust_work(struct work_struct *work)
 480 {
 481         struct b43_wl *wl = container_of(work, struct b43_wl,
 482                                          txpower_adjust_work);
 483         struct b43_wldev *dev;
 484
 485         mutex_lock(&wl->mutex);
 486         dev = wl->current_dev;
 487
 488         if (likely(dev && (b43_status(dev) >= B43_STAT_STARTED)))
 489                 dev->phy.ops->adjust_txpower(dev);
 490
 491         mutex_unlock(&wl->mutex);
 492 }
 493
 494 void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags)
 495 {
 496         struct b43_phy *phy = &dev->phy;
 497         unsigned long now = jiffies;
 498         enum b43_txpwr_result result;
 499
 500         if (!(flags & B43_TXPWR_IGNORE_TIME)) {
 501                 /* Check if it's time for a TXpower check. */
 502                 if (time_before(now, phy->next_txpwr_check_time))
 503                         return; /* Not yet */
 504         }
 505         /* The next check will be needed in two seconds, or later. */
 506         phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2));
 507
 508         if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) &&
 509             (dev->dev->board_type == SSB_BOARD_BU4306))
 510                 return; /* No software txpower adjustment needed */
 511
 512         result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI));
 513         if (result == B43_TXPWR_RES_DONE)
 514                 return; /* We are done. */
 515         B43_WARN_ON(result != B43_TXPWR_RES_NEED_ADJUST);
 516         B43_WARN_ON(phy->ops->adjust_txpower == NULL);
 517
 518         /* We must adjust the transmission power in hardware.
 519          * Schedule b43_phy_txpower_adjust_work(). */
 520         ieee80211_queue_work(dev->wl->hw, &dev->wl->txpower_adjust_work);
 521 }
 522
 523 int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset)
 524 {
 525         const bool is_ofdm = (shm_offset != B43_SHM_SH_TSSI_CCK);
 526         unsigned int a, b, c, d;
 527         unsigned int average;
 528         u32 tmp;
 529
 530         tmp = b43_shm_read32(dev, B43_SHM_SHARED, shm_offset);
 531         a = tmp & 0xFF;
 532         b = (tmp >> 8) & 0xFF;
 533         c = (tmp >> 16) & 0xFF;
 534         d = (tmp >> 24) & 0xFF;
 535         if (a == 0 || a == B43_TSSI_MAX ||
 536             b == 0 || b == B43_TSSI_MAX ||
 537             c == 0 || c == B43_TSSI_MAX ||
 538             d == 0 || d == B43_TSSI_MAX)
 539                 return -ENOENT;
 540         /* The values are OK. Clear them. */
 541         tmp = B43_TSSI_MAX | (B43_TSSI_MAX << 8) |
 542               (B43_TSSI_MAX << 16) | (B43_TSSI_MAX << 24);
 543         b43_shm_write32(dev, B43_SHM_SHARED, shm_offset, tmp);
 544
 545         if (is_ofdm) {
 546                 a = (a + 32) & 0x3F;
 547                 b = (b + 32) & 0x3F;
 548                 c = (c + 32) & 0x3F;
 549                 d = (d + 32) & 0x3F;
 550         }
 551
 552         /* Get the average of the values with 0.5 added to each value. */
 553         average = (a + b + c + d + 2) / 4;
 554         if (is_ofdm) {
 555                 /* Adjust for CCK-boost */
 556                 if (b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF1)
 557                     & B43_HF_CCKBOOST)
 558                         average = (average >= 13) ? (average - 13) : 0;
 559         }
 560
 561         return average;
 562 }
 563
 564 void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
 565 {
 566         b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
 567 }
 568
 569
 570 bool b43_is_40mhz(struct b43_wldev *dev)
 571 {
 572         return dev->phy.chandef->width == NL80211_CHAN_WIDTH_40;
 573 }
 574
 575 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
 576 void b43_phy_force_clock(struct b43_wldev *dev, bool force)
 577 {
 578         u32 tmp;
 579
 580         WARN_ON(dev->phy.type != B43_PHYTYPE_N &&
 581                 dev->phy.type != B43_PHYTYPE_HT &&
 582                 dev->phy.type != B43_PHYTYPE_AC);
 583
 584         switch (dev->dev->bus_type) {
 585 #ifdef CONFIG_B43_BCMA
 586         case B43_BUS_BCMA:
 587                 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
 588                 if (force)
 589                         tmp |= BCMA_IOCTL_FGC;
 590                 else
 591                         tmp &= ~BCMA_IOCTL_FGC;
 592                 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
 593                 break;
 594 #endif
 595 #ifdef CONFIG_B43_SSB
 596         case B43_BUS_SSB:
 597                 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
 598                 if (force)
 599                         tmp |= SSB_TMSLOW_FGC;
 600                 else
 601                         tmp &= ~SSB_TMSLOW_FGC;
 602                 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
 603                 break;
 604 #endif
 605         }
 606 }
 607
 608 /* http://bcm-v4.sipsolutions.net/802.11/PHY/Cordic */
 609 struct b43_c32 b43_cordic(int theta)
 610 {
 611         static const u32 arctg[] = {
 612                 2949120, 1740967, 919879, 466945, 234379, 117304,
 613                   58666,   29335,  14668,   7334,   3667,   1833,
 614                     917,     458,    229,    115,     57,     29,
 615         };
 616         u8 i;
 617         s32 tmp;
 618         s8 signx = 1;
 619         u32 angle = 0;
 620         struct b43_c32 ret = { .i = 39797, .q = 0, };
 621
 622         while (theta > (180 << 16))
 623                 theta -= (360 << 16);
 624         while (theta < -(180 << 16))
 625                 theta += (360 << 16);
 626
 627         if (theta > (90 << 16)) {
 628                 theta -= (180 << 16);
 629                 signx = -1;
 630         } else if (theta < -(90 << 16)) {
 631                 theta += (180 << 16);
 632                 signx = -1;
 633         }
 634
 635         for (i = 0; i <= 17; i++) {
 636                 if (theta > angle) {
 637                         tmp = ret.i - (ret.q >> i);
 638                         ret.q += ret.i >> i;
 639                         ret.i = tmp;
 640                         angle += arctg[i];
 641                 } else {
 642                         tmp = ret.i + (ret.q >> i);
 643                         ret.q -= ret.i >> i;
 644                         ret.i = tmp;
 645                         angle -= arctg[i];
 646                 }
 647         }
 648
 649         ret.i *= signx;
 650         ret.q *= signx;
 651
 652         return ret;
 653 }