drivers/net/wireless/intel/iwlegacy/4965.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  *  Intel Linux Wireless <ilw@linux.intel.com>
  23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  24  *
  25  *****************************************************************************/
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/pci.h>
  30 #include <linux/dma-mapping.h>
  31 #include <linux/delay.h>
  32 #include <linux/sched.h>
  33 #include <linux/skbuff.h>
  34 #include <linux/netdevice.h>
  35 #include <net/mac80211.h>
  36 #include <linux/etherdevice.h>
  37 #include <asm/unaligned.h>
  38
  39 #include "common.h"
  40 #include "4965.h"
  41
  42 /**
  43  * il_verify_inst_sparse - verify runtime uCode image in card vs. host,
  44  *   using sample data 100 bytes apart.  If these sample points are good,
  45  *   it's a pretty good bet that everything between them is good, too.
  46  */
  47 static int
  48 il4965_verify_inst_sparse(struct il_priv *il, __le32 * image, u32 len)
  49 {
  50         u32 val;
  51         int ret = 0;
  52         u32 errcnt = 0;
  53         u32 i;
  54
  55         D_INFO("ucode inst image size is %u\n", len);
  56
  57         for (i = 0; i < len; i += 100, image += 100 / sizeof(u32)) {
  58                 /* read data comes through single port, auto-incr addr */
  59                 /* NOTE: Use the debugless read so we don't flood kernel log
  60                  * if IL_DL_IO is set */
  61                 il_wr(il, HBUS_TARG_MEM_RADDR, i + IL4965_RTC_INST_LOWER_BOUND);
  62                 val = _il_rd(il, HBUS_TARG_MEM_RDAT);
  63                 if (val != le32_to_cpu(*image)) {
  64                         ret = -EIO;
  65                         errcnt++;
  66                         if (errcnt >= 3)
  67                                 break;
  68                 }
  69         }
  70
  71         return ret;
  72 }
  73
  74 /**
  75  * il4965_verify_inst_full - verify runtime uCode image in card vs. host,
  76  *     looking at all data.
  77  */
  78 static int
  79 il4965_verify_inst_full(struct il_priv *il, __le32 * image, u32 len)
  80 {
  81         u32 val;
  82         u32 save_len = len;
  83         int ret = 0;
  84         u32 errcnt;
  85
  86         D_INFO("ucode inst image size is %u\n", len);
  87
  88         il_wr(il, HBUS_TARG_MEM_RADDR, IL4965_RTC_INST_LOWER_BOUND);
  89
  90         errcnt = 0;
  91         for (; len > 0; len -= sizeof(u32), image++) {
  92                 /* read data comes through single port, auto-incr addr */
  93                 /* NOTE: Use the debugless read so we don't flood kernel log
  94                  * if IL_DL_IO is set */
  95                 val = _il_rd(il, HBUS_TARG_MEM_RDAT);
  96                 if (val != le32_to_cpu(*image)) {
  97                         IL_ERR("uCode INST section is invalid at "
  98                                "offset 0x%x, is 0x%x, s/b 0x%x\n",
  99                                save_len - len, val, le32_to_cpu(*image));
 100                         ret = -EIO;
 101                         errcnt++;
 102                         if (errcnt >= 20)
 103                                 break;
 104                 }
 105         }
 106
 107         if (!errcnt)
 108                 D_INFO("ucode image in INSTRUCTION memory is good\n");
 109
 110         return ret;
 111 }
 112
 113 /**
 114  * il4965_verify_ucode - determine which instruction image is in SRAM,
 115  *    and verify its contents
 116  */
 117 int
 118 il4965_verify_ucode(struct il_priv *il)
 119 {
 120         __le32 *image;
 121         u32 len;
 122         int ret;
 123
 124         /* Try bootstrap */
 125         image = (__le32 *) il->ucode_boot.v_addr;
 126         len = il->ucode_boot.len;
 127         ret = il4965_verify_inst_sparse(il, image, len);
 128         if (!ret) {
 129                 D_INFO("Bootstrap uCode is good in inst SRAM\n");
 130                 return 0;
 131         }
 132
 133         /* Try initialize */
 134         image = (__le32 *) il->ucode_init.v_addr;
 135         len = il->ucode_init.len;
 136         ret = il4965_verify_inst_sparse(il, image, len);
 137         if (!ret) {
 138                 D_INFO("Initialize uCode is good in inst SRAM\n");
 139                 return 0;
 140         }
 141
 142         /* Try runtime/protocol */
 143         image = (__le32 *) il->ucode_code.v_addr;
 144         len = il->ucode_code.len;
 145         ret = il4965_verify_inst_sparse(il, image, len);
 146         if (!ret) {
 147                 D_INFO("Runtime uCode is good in inst SRAM\n");
 148                 return 0;
 149         }
 150
 151         IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
 152
 153         /* Since nothing seems to match, show first several data entries in
 154          * instruction SRAM, so maybe visual inspection will give a clue.
 155          * Selection of bootstrap image (vs. other images) is arbitrary. */
 156         image = (__le32 *) il->ucode_boot.v_addr;
 157         len = il->ucode_boot.len;
 158         ret = il4965_verify_inst_full(il, image, len);
 159
 160         return ret;
 161 }
 162
 163 /******************************************************************************
 164  *
 165  * EEPROM related functions
 166  *
 167 ******************************************************************************/
 168
 169 /*
 170  * The device's EEPROM semaphore prevents conflicts between driver and uCode
 171  * when accessing the EEPROM; each access is a series of pulses to/from the
 172  * EEPROM chip, not a single event, so even reads could conflict if they
 173  * weren't arbitrated by the semaphore.
 174  */
 175 int
 176 il4965_eeprom_acquire_semaphore(struct il_priv *il)
 177 {
 178         u16 count;
 179         int ret;
 180
 181         for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) {
 182                 /* Request semaphore */
 183                 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
 184                            CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
 185
 186                 /* See if we got it */
 187                 ret =
 188                     _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
 189                                  CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
 190                                  CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
 191                                  EEPROM_SEM_TIMEOUT);
 192                 if (ret >= 0)
 193                         return ret;
 194         }
 195
 196         return ret;
 197 }
 198
 199 void
 200 il4965_eeprom_release_semaphore(struct il_priv *il)
 201 {
 202         il_clear_bit(il, CSR_HW_IF_CONFIG_REG,
 203                      CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
 204
 205 }
 206
 207 int
 208 il4965_eeprom_check_version(struct il_priv *il)
 209 {
 210         u16 eeprom_ver;
 211         u16 calib_ver;
 212
 213         eeprom_ver = il_eeprom_query16(il, EEPROM_VERSION);
 214         calib_ver = il_eeprom_query16(il, EEPROM_4965_CALIB_VERSION_OFFSET);
 215
 216         if (eeprom_ver < il->cfg->eeprom_ver ||
 217             calib_ver < il->cfg->eeprom_calib_ver)
 218                 goto err;
 219
 220         IL_INFO("device EEPROM VER=0x%x, CALIB=0x%x\n", eeprom_ver, calib_ver);
 221
 222         return 0;
 223 err:
 224         IL_ERR("Unsupported (too old) EEPROM VER=0x%x < 0x%x "
 225                "CALIB=0x%x < 0x%x\n", eeprom_ver, il->cfg->eeprom_ver,
 226                calib_ver, il->cfg->eeprom_calib_ver);
 227         return -EINVAL;
 228
 229 }
 230
 231 void
 232 il4965_eeprom_get_mac(const struct il_priv *il, u8 * mac)
 233 {
 234         const u8 *addr = il_eeprom_query_addr(il,
 235                                               EEPROM_MAC_ADDRESS);
 236         memcpy(mac, addr, ETH_ALEN);
 237 }
 238
 239 /* Send led command */
 240 static int
 241 il4965_send_led_cmd(struct il_priv *il, struct il_led_cmd *led_cmd)
 242 {
 243         struct il_host_cmd cmd = {
 244                 .id = C_LEDS,
 245                 .len = sizeof(struct il_led_cmd),
 246                 .data = led_cmd,
 247                 .flags = CMD_ASYNC,
 248                 .callback = NULL,
 249         };
 250         u32 reg;
 251
 252         reg = _il_rd(il, CSR_LED_REG);
 253         if (reg != (reg & CSR_LED_BSM_CTRL_MSK))
 254                 _il_wr(il, CSR_LED_REG, reg & CSR_LED_BSM_CTRL_MSK);
 255
 256         return il_send_cmd(il, &cmd);
 257 }
 258
 259 /* Set led register off */
 260 void
 261 il4965_led_enable(struct il_priv *il)
 262 {
 263         _il_wr(il, CSR_LED_REG, CSR_LED_REG_TRUN_ON);
 264 }
 265
 266 static int il4965_send_tx_power(struct il_priv *il);
 267 static int il4965_hw_get_temperature(struct il_priv *il);
 268
 269 /* Highest firmware API version supported */
 270 #define IL4965_UCODE_API_MAX 2
 271
 272 /* Lowest firmware API version supported */
 273 #define IL4965_UCODE_API_MIN 2
 274
 275 #define IL4965_FW_PRE "iwlwifi-4965-"
 276 #define _IL4965_MODULE_FIRMWARE(api) IL4965_FW_PRE #api ".ucode"
 277 #define IL4965_MODULE_FIRMWARE(api) _IL4965_MODULE_FIRMWARE(api)
 278
 279 /* check contents of special bootstrap uCode SRAM */
 280 static int
 281 il4965_verify_bsm(struct il_priv *il)
 282 {
 283         __le32 *image = il->ucode_boot.v_addr;
 284         u32 len = il->ucode_boot.len;
 285         u32 reg;
 286         u32 val;
 287
 288         D_INFO("Begin verify bsm\n");
 289
 290         /* verify BSM SRAM contents */
 291         val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
 292         for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len;
 293              reg += sizeof(u32), image++) {
 294                 val = il_rd_prph(il, reg);
 295                 if (val != le32_to_cpu(*image)) {
 296                         IL_ERR("BSM uCode verification failed at "
 297                                "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
 298                                BSM_SRAM_LOWER_BOUND, reg - BSM_SRAM_LOWER_BOUND,
 299                                len, val, le32_to_cpu(*image));
 300                         return -EIO;
 301                 }
 302         }
 303
 304         D_INFO("BSM bootstrap uCode image OK\n");
 305
 306         return 0;
 307 }
 308
 309 /**
 310  * il4965_load_bsm - Load bootstrap instructions
 311  *
 312  * BSM operation:
 313  *
 314  * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
 315  * in special SRAM that does not power down during RFKILL.  When powering back
 316  * up after power-saving sleeps (or during initial uCode load), the BSM loads
 317  * the bootstrap program into the on-board processor, and starts it.
 318  *
 319  * The bootstrap program loads (via DMA) instructions and data for a new
 320  * program from host DRAM locations indicated by the host driver in the
 321  * BSM_DRAM_* registers.  Once the new program is loaded, it starts
 322  * automatically.
 323  *
 324  * When initializing the NIC, the host driver points the BSM to the
 325  * "initialize" uCode image.  This uCode sets up some internal data, then
 326  * notifies host via "initialize alive" that it is complete.
 327  *
 328  * The host then replaces the BSM_DRAM_* pointer values to point to the
 329  * normal runtime uCode instructions and a backup uCode data cache buffer
 330  * (filled initially with starting data values for the on-board processor),
 331  * then triggers the "initialize" uCode to load and launch the runtime uCode,
 332  * which begins normal operation.
 333  *
 334  * When doing a power-save shutdown, runtime uCode saves data SRAM into
 335  * the backup data cache in DRAM before SRAM is powered down.
 336  *
 337  * When powering back up, the BSM loads the bootstrap program.  This reloads
 338  * the runtime uCode instructions and the backup data cache into SRAM,
 339  * and re-launches the runtime uCode from where it left off.
 340  */
 341 static int
 342 il4965_load_bsm(struct il_priv *il)
 343 {
 344         __le32 *image = il->ucode_boot.v_addr;
 345         u32 len = il->ucode_boot.len;
 346         dma_addr_t pinst;
 347         dma_addr_t pdata;
 348         u32 inst_len;
 349         u32 data_len;
 350         int i;
 351         u32 done;
 352         u32 reg_offset;
 353         int ret;
 354
 355         D_INFO("Begin load bsm\n");
 356
 357         il->ucode_type = UCODE_RT;
 358
 359         /* make sure bootstrap program is no larger than BSM's SRAM size */
 360         if (len > IL49_MAX_BSM_SIZE)
 361                 return -EINVAL;
 362
 363         /* Tell bootstrap uCode where to find the "Initialize" uCode
 364          *   in host DRAM ... host DRAM physical address bits 35:4 for 4965.
 365          * NOTE:  il_init_alive_start() will replace these values,
 366          *        after the "initialize" uCode has run, to point to
 367          *        runtime/protocol instructions and backup data cache.
 368          */
 369         pinst = il->ucode_init.p_addr >> 4;
 370         pdata = il->ucode_init_data.p_addr >> 4;
 371         inst_len = il->ucode_init.len;
 372         data_len = il->ucode_init_data.len;
 373
 374         il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
 375         il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
 376         il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
 377         il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
 378
 379         /* Fill BSM memory with bootstrap instructions */
 380         for (reg_offset = BSM_SRAM_LOWER_BOUND;
 381              reg_offset < BSM_SRAM_LOWER_BOUND + len;
 382              reg_offset += sizeof(u32), image++)
 383                 _il_wr_prph(il, reg_offset, le32_to_cpu(*image));
 384
 385         ret = il4965_verify_bsm(il);
 386         if (ret)
 387                 return ret;
 388
 389         /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
 390         il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
 391         il_wr_prph(il, BSM_WR_MEM_DST_REG, IL49_RTC_INST_LOWER_BOUND);
 392         il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
 393
 394         /* Load bootstrap code into instruction SRAM now,
 395          *   to prepare to load "initialize" uCode */
 396         il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
 397
 398         /* Wait for load of bootstrap uCode to finish */
 399         for (i = 0; i < 100; i++) {
 400                 done = il_rd_prph(il, BSM_WR_CTRL_REG);
 401                 if (!(done & BSM_WR_CTRL_REG_BIT_START))
 402                         break;
 403                 udelay(10);
 404         }
 405         if (i < 100)
 406                 D_INFO("BSM write complete, poll %d iterations\n", i);
 407         else {
 408                 IL_ERR("BSM write did not complete!\n");
 409                 return -EIO;
 410         }
 411
 412         /* Enable future boot loads whenever power management unit triggers it
 413          *   (e.g. when powering back up after power-save shutdown) */
 414         il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
 415
 416         return 0;
 417 }
 418
 419 /**
 420  * il4965_set_ucode_ptrs - Set uCode address location
 421  *
 422  * Tell initialization uCode where to find runtime uCode.
 423  *
 424  * BSM registers initially contain pointers to initialization uCode.
 425  * We need to replace them to load runtime uCode inst and data,
 426  * and to save runtime data when powering down.
 427  */
 428 static int
 429 il4965_set_ucode_ptrs(struct il_priv *il)
 430 {
 431         dma_addr_t pinst;
 432         dma_addr_t pdata;
 433         int ret = 0;
 434
 435         /* bits 35:4 for 4965 */
 436         pinst = il->ucode_code.p_addr >> 4;
 437         pdata = il->ucode_data_backup.p_addr >> 4;
 438
 439         /* Tell bootstrap uCode where to find image to load */
 440         il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
 441         il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
 442         il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, il->ucode_data.len);
 443
 444         /* Inst byte count must be last to set up, bit 31 signals uCode
 445          *   that all new ptr/size info is in place */
 446         il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
 447                    il->ucode_code.len | BSM_DRAM_INST_LOAD);
 448         D_INFO("Runtime uCode pointers are set.\n");
 449
 450         return ret;
 451 }
 452
 453 /**
 454  * il4965_init_alive_start - Called after N_ALIVE notification received
 455  *
 456  * Called after N_ALIVE notification received from "initialize" uCode.
 457  *
 458  * The 4965 "initialize" ALIVE reply contains calibration data for:
 459  *   Voltage, temperature, and MIMO tx gain correction, now stored in il
 460  *   (3945 does not contain this data).
 461  *
 462  * Tell "initialize" uCode to go ahead and load the runtime uCode.
 463 */
 464 static void
 465 il4965_init_alive_start(struct il_priv *il)
 466 {
 467         /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
 468          * This is a paranoid check, because we would not have gotten the
 469          * "initialize" alive if code weren't properly loaded.  */
 470         if (il4965_verify_ucode(il)) {
 471                 /* Runtime instruction load was bad;
 472                  * take it all the way back down so we can try again */
 473                 D_INFO("Bad \"initialize\" uCode load.\n");
 474                 goto restart;
 475         }
 476
 477         /* Calculate temperature */
 478         il->temperature = il4965_hw_get_temperature(il);
 479
 480         /* Send pointers to protocol/runtime uCode image ... init code will
 481          * load and launch runtime uCode, which will send us another "Alive"
 482          * notification. */
 483         D_INFO("Initialization Alive received.\n");
 484         if (il4965_set_ucode_ptrs(il)) {
 485                 /* Runtime instruction load won't happen;
 486                  * take it all the way back down so we can try again */
 487                 D_INFO("Couldn't set up uCode pointers.\n");
 488                 goto restart;
 489         }
 490         return;
 491
 492 restart:
 493         queue_work(il->workqueue, &il->restart);
 494 }
 495
 496 static bool
 497 iw4965_is_ht40_channel(__le32 rxon_flags)
 498 {
 499         int chan_mod =
 500             le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK) >>
 501             RXON_FLG_CHANNEL_MODE_POS;
 502         return (chan_mod == CHANNEL_MODE_PURE_40 ||
 503                 chan_mod == CHANNEL_MODE_MIXED);
 504 }
 505
 506 void
 507 il4965_nic_config(struct il_priv *il)
 508 {
 509         unsigned long flags;
 510         u16 radio_cfg;
 511
 512         spin_lock_irqsave(&il->lock, flags);
 513
 514         radio_cfg = il_eeprom_query16(il, EEPROM_RADIO_CONFIG);
 515
 516         /* write radio config values to register */
 517         if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX)
 518                 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
 519                            EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
 520                            EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
 521                            EEPROM_RF_CFG_DASH_MSK(radio_cfg));
 522
 523         /* set CSR_HW_CONFIG_REG for uCode use */
 524         il_set_bit(il, CSR_HW_IF_CONFIG_REG,
 525                    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
 526                    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 527
 528         il->calib_info =
 529             (struct il_eeprom_calib_info *)
 530             il_eeprom_query_addr(il, EEPROM_4965_CALIB_TXPOWER_OFFSET);
 531
 532         spin_unlock_irqrestore(&il->lock, flags);
 533 }
 534
 535 /* Reset differential Rx gains in NIC to prepare for chain noise calibration.
 536  * Called after every association, but this runs only once!
 537  *  ... once chain noise is calibrated the first time, it's good forever.  */
 538 static void
 539 il4965_chain_noise_reset(struct il_priv *il)
 540 {
 541         struct il_chain_noise_data *data = &(il->chain_noise_data);
 542
 543         if (data->state == IL_CHAIN_NOISE_ALIVE && il_is_any_associated(il)) {
 544                 struct il_calib_diff_gain_cmd cmd;
 545
 546                 /* clear data for chain noise calibration algorithm */
 547                 data->chain_noise_a = 0;
 548                 data->chain_noise_b = 0;
 549                 data->chain_noise_c = 0;
 550                 data->chain_signal_a = 0;
 551                 data->chain_signal_b = 0;
 552                 data->chain_signal_c = 0;
 553                 data->beacon_count = 0;
 554
 555                 memset(&cmd, 0, sizeof(cmd));
 556                 cmd.hdr.op_code = IL_PHY_CALIBRATE_DIFF_GAIN_CMD;
 557                 cmd.diff_gain_a = 0;
 558                 cmd.diff_gain_b = 0;
 559                 cmd.diff_gain_c = 0;
 560                 if (il_send_cmd_pdu(il, C_PHY_CALIBRATION, sizeof(cmd), &cmd))
 561                         IL_ERR("Could not send C_PHY_CALIBRATION\n");
 562                 data->state = IL_CHAIN_NOISE_ACCUMULATE;
 563                 D_CALIB("Run chain_noise_calibrate\n");
 564         }
 565 }
 566
 567 static s32
 568 il4965_math_div_round(s32 num, s32 denom, s32 * res)
 569 {
 570         s32 sign = 1;
 571
 572         if (num < 0) {
 573                 sign = -sign;
 574                 num = -num;
 575         }
 576         if (denom < 0) {
 577                 sign = -sign;
 578                 denom = -denom;
 579         }
 580         *res = 1;
 581         *res = ((num * 2 + denom) / (denom * 2)) * sign;
 582
 583         return 1;
 584 }
 585
 586 /**
 587  * il4965_get_voltage_compensation - Power supply voltage comp for txpower
 588  *
 589  * Determines power supply voltage compensation for txpower calculations.
 590  * Returns number of 1/2-dB steps to subtract from gain table idx,
 591  * to compensate for difference between power supply voltage during
 592  * factory measurements, vs. current power supply voltage.
 593  *
 594  * Voltage indication is higher for lower voltage.
 595  * Lower voltage requires more gain (lower gain table idx).
 596  */
 597 static s32
 598 il4965_get_voltage_compensation(s32 eeprom_voltage, s32 current_voltage)
 599 {
 600         s32 comp = 0;
 601
 602         if (TX_POWER_IL_ILLEGAL_VOLTAGE == eeprom_voltage ||
 603             TX_POWER_IL_ILLEGAL_VOLTAGE == current_voltage)
 604                 return 0;
 605
 606         il4965_math_div_round(current_voltage - eeprom_voltage,
 607                               TX_POWER_IL_VOLTAGE_CODES_PER_03V, &comp);
 608
 609         if (current_voltage > eeprom_voltage)
 610                 comp *= 2;
 611         if ((comp < -2) || (comp > 2))
 612                 comp = 0;
 613
 614         return comp;
 615 }
 616
 617 static s32
 618 il4965_get_tx_atten_grp(u16 channel)
 619 {
 620         if (channel >= CALIB_IL_TX_ATTEN_GR5_FCH &&
 621             channel <= CALIB_IL_TX_ATTEN_GR5_LCH)
 622                 return CALIB_CH_GROUP_5;
 623
 624         if (channel >= CALIB_IL_TX_ATTEN_GR1_FCH &&
 625             channel <= CALIB_IL_TX_ATTEN_GR1_LCH)
 626                 return CALIB_CH_GROUP_1;
 627
 628         if (channel >= CALIB_IL_TX_ATTEN_GR2_FCH &&
 629             channel <= CALIB_IL_TX_ATTEN_GR2_LCH)
 630                 return CALIB_CH_GROUP_2;
 631
 632         if (channel >= CALIB_IL_TX_ATTEN_GR3_FCH &&
 633             channel <= CALIB_IL_TX_ATTEN_GR3_LCH)
 634                 return CALIB_CH_GROUP_3;
 635
 636         if (channel >= CALIB_IL_TX_ATTEN_GR4_FCH &&
 637             channel <= CALIB_IL_TX_ATTEN_GR4_LCH)
 638                 return CALIB_CH_GROUP_4;
 639
 640         return -EINVAL;
 641 }
 642
 643 static u32
 644 il4965_get_sub_band(const struct il_priv *il, u32 channel)
 645 {
 646         s32 b = -1;
 647
 648         for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
 649                 if (il->calib_info->band_info[b].ch_from == 0)
 650                         continue;
 651
 652                 if (channel >= il->calib_info->band_info[b].ch_from &&
 653                     channel <= il->calib_info->band_info[b].ch_to)
 654                         break;
 655         }
 656
 657         return b;
 658 }
 659
 660 static s32
 661 il4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
 662 {
 663         s32 val;
 664
 665         if (x2 == x1)
 666                 return y1;
 667         else {
 668                 il4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
 669                 return val + y2;
 670         }
 671 }
 672
 673 /**
 674  * il4965_interpolate_chan - Interpolate factory measurements for one channel
 675  *
 676  * Interpolates factory measurements from the two sample channels within a
 677  * sub-band, to apply to channel of interest.  Interpolation is proportional to
 678  * differences in channel frequencies, which is proportional to differences
 679  * in channel number.
 680  */
 681 static int
 682 il4965_interpolate_chan(struct il_priv *il, u32 channel,
 683                         struct il_eeprom_calib_ch_info *chan_info)
 684 {
 685         s32 s = -1;
 686         u32 c;
 687         u32 m;
 688         const struct il_eeprom_calib_measure *m1;
 689         const struct il_eeprom_calib_measure *m2;
 690         struct il_eeprom_calib_measure *omeas;
 691         u32 ch_i1;
 692         u32 ch_i2;
 693
 694         s = il4965_get_sub_band(il, channel);
 695         if (s >= EEPROM_TX_POWER_BANDS) {
 696                 IL_ERR("Tx Power can not find channel %d\n", channel);
 697                 return -1;
 698         }
 699
 700         ch_i1 = il->calib_info->band_info[s].ch1.ch_num;
 701         ch_i2 = il->calib_info->band_info[s].ch2.ch_num;
 702         chan_info->ch_num = (u8) channel;
 703
 704         D_TXPOWER("channel %d subband %d factory cal ch %d & %d\n", channel, s,
 705                   ch_i1, ch_i2);
 706
 707         for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
 708                 for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
 709                         m1 = &(il->calib_info->band_info[s].ch1.
 710                                measurements[c][m]);
 711                         m2 = &(il->calib_info->band_info[s].ch2.
 712                                measurements[c][m]);
 713                         omeas = &(chan_info->measurements[c][m]);
 714
 715                         omeas->actual_pow =
 716                             (u8) il4965_interpolate_value(channel, ch_i1,
 717                                                           m1->actual_pow, ch_i2,
 718                                                           m2->actual_pow);
 719                         omeas->gain_idx =
 720                             (u8) il4965_interpolate_value(channel, ch_i1,
 721                                                           m1->gain_idx, ch_i2,
 722                                                           m2->gain_idx);
 723                         omeas->temperature =
 724                             (u8) il4965_interpolate_value(channel, ch_i1,
 725                                                           m1->temperature,
 726                                                           ch_i2,
 727                                                           m2->temperature);
 728                         omeas->pa_det =
 729                             (s8) il4965_interpolate_value(channel, ch_i1,
 730                                                           m1->pa_det, ch_i2,
 731                                                           m2->pa_det);
 732
 733                         D_TXPOWER("chain %d meas %d AP1=%d AP2=%d AP=%d\n", c,
 734                                   m, m1->actual_pow, m2->actual_pow,
 735                                   omeas->actual_pow);
 736                         D_TXPOWER("chain %d meas %d NI1=%d NI2=%d NI=%d\n", c,
 737                                   m, m1->gain_idx, m2->gain_idx,
 738                                   omeas->gain_idx);
 739                         D_TXPOWER("chain %d meas %d PA1=%d PA2=%d PA=%d\n", c,
 740                                   m, m1->pa_det, m2->pa_det, omeas->pa_det);
 741                         D_TXPOWER("chain %d meas %d  T1=%d  T2=%d  T=%d\n", c,
 742                                   m, m1->temperature, m2->temperature,
 743                                   omeas->temperature);
 744                 }
 745         }
 746
 747         return 0;
 748 }
 749
 750 /* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
 751  * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
 752 static s32 back_off_table[] = {
 753         10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */
 754         10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */
 755         10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */
 756         10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */
 757         10                      /* CCK */
 758 };
 759
 760 /* Thermal compensation values for txpower for various frequency ranges ...
 761  *   ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
 762 static struct il4965_txpower_comp_entry {
 763         s32 degrees_per_05db_a;
 764         s32 degrees_per_05db_a_denom;
 765 } tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
 766         {
 767         9, 2},                  /* group 0 5.2, ch  34-43 */
 768         {
 769         4, 1},                  /* group 1 5.2, ch  44-70 */
 770         {
 771         4, 1},                  /* group 2 5.2, ch  71-124 */
 772         {
 773         4, 1},                  /* group 3 5.2, ch 125-200 */
 774         {
 775         3, 1}                   /* group 4 2.4, ch   all */
 776 };
 777
 778 static s32
 779 get_min_power_idx(s32 rate_power_idx, u32 band)
 780 {
 781         if (!band) {
 782                 if ((rate_power_idx & 7) <= 4)
 783                         return MIN_TX_GAIN_IDX_52GHZ_EXT;
 784         }
 785         return MIN_TX_GAIN_IDX;
 786 }
 787
 788 struct gain_entry {
 789         u8 dsp;
 790         u8 radio;
 791 };
 792
 793 static const struct gain_entry gain_table[2][108] = {
 794         /* 5.2GHz power gain idx table */
 795         {
 796          {123, 0x3F},           /* highest txpower */
 797          {117, 0x3F},
 798          {110, 0x3F},
 799          {104, 0x3F},
 800          {98, 0x3F},
 801          {110, 0x3E},
 802          {104, 0x3E},
 803          {98, 0x3E},
 804          {110, 0x3D},
 805          {104, 0x3D},
 806          {98, 0x3D},
 807          {110, 0x3C},
 808          {104, 0x3C},
 809          {98, 0x3C},
 810          {110, 0x3B},
 811          {104, 0x3B},
 812          {98, 0x3B},
 813          {110, 0x3A},
 814          {104, 0x3A},
 815          {98, 0x3A},
 816          {110, 0x39},
 817          {104, 0x39},
 818          {98, 0x39},
 819          {110, 0x38},
 820          {104, 0x38},
 821          {98, 0x38},
 822          {110, 0x37},
 823          {104, 0x37},
 824          {98, 0x37},
 825          {110, 0x36},
 826          {104, 0x36},
 827          {98, 0x36},
 828          {110, 0x35},
 829          {104, 0x35},
 830          {98, 0x35},
 831          {110, 0x34},
 832          {104, 0x34},
 833          {98, 0x34},
 834          {110, 0x33},
 835          {104, 0x33},
 836          {98, 0x33},
 837          {110, 0x32},
 838          {104, 0x32},
 839          {98, 0x32},
 840          {110, 0x31},
 841          {104, 0x31},
 842          {98, 0x31},
 843          {110, 0x30},
 844          {104, 0x30},
 845          {98, 0x30},
 846          {110, 0x25},
 847          {104, 0x25},
 848          {98, 0x25},
 849          {110, 0x24},
 850          {104, 0x24},
 851          {98, 0x24},
 852          {110, 0x23},
 853          {104, 0x23},
 854          {98, 0x23},
 855          {110, 0x22},
 856          {104, 0x18},
 857          {98, 0x18},
 858          {110, 0x17},
 859          {104, 0x17},
 860          {98, 0x17},
 861          {110, 0x16},
 862          {104, 0x16},
 863          {98, 0x16},
 864          {110, 0x15},
 865          {104, 0x15},
 866          {98, 0x15},
 867          {110, 0x14},
 868          {104, 0x14},
 869          {98, 0x14},
 870          {110, 0x13},
 871          {104, 0x13},
 872          {98, 0x13},
 873          {110, 0x12},
 874          {104, 0x08},
 875          {98, 0x08},
 876          {110, 0x07},
 877          {104, 0x07},
 878          {98, 0x07},
 879          {110, 0x06},
 880          {104, 0x06},
 881          {98, 0x06},
 882          {110, 0x05},
 883          {104, 0x05},
 884          {98, 0x05},
 885          {110, 0x04},
 886          {104, 0x04},
 887          {98, 0x04},
 888          {110, 0x03},
 889          {104, 0x03},
 890          {98, 0x03},
 891          {110, 0x02},
 892          {104, 0x02},
 893          {98, 0x02},
 894          {110, 0x01},
 895          {104, 0x01},
 896          {98, 0x01},
 897          {110, 0x00},
 898          {104, 0x00},
 899          {98, 0x00},
 900          {93, 0x00},
 901          {88, 0x00},
 902          {83, 0x00},
 903          {78, 0x00},
 904          },
 905         /* 2.4GHz power gain idx table */
 906         {
 907          {110, 0x3f},           /* highest txpower */
 908          {104, 0x3f},
 909          {98, 0x3f},
 910          {110, 0x3e},
 911          {104, 0x3e},
 912          {98, 0x3e},
 913          {110, 0x3d},
 914          {104, 0x3d},
 915          {98, 0x3d},
 916          {110, 0x3c},
 917          {104, 0x3c},
 918          {98, 0x3c},
 919          {110, 0x3b},
 920          {104, 0x3b},
 921          {98, 0x3b},
 922          {110, 0x3a},
 923          {104, 0x3a},
 924          {98, 0x3a},
 925          {110, 0x39},
 926          {104, 0x39},
 927          {98, 0x39},
 928          {110, 0x38},
 929          {104, 0x38},
 930          {98, 0x38},
 931          {110, 0x37},
 932          {104, 0x37},
 933          {98, 0x37},
 934          {110, 0x36},
 935          {104, 0x36},
 936          {98, 0x36},
 937          {110, 0x35},
 938          {104, 0x35},
 939          {98, 0x35},
 940          {110, 0x34},
 941          {104, 0x34},
 942          {98, 0x34},
 943          {110, 0x33},
 944          {104, 0x33},
 945          {98, 0x33},
 946          {110, 0x32},
 947          {104, 0x32},
 948          {98, 0x32},
 949          {110, 0x31},
 950          {104, 0x31},
 951          {98, 0x31},
 952          {110, 0x30},
 953          {104, 0x30},
 954          {98, 0x30},
 955          {110, 0x6},
 956          {104, 0x6},
 957          {98, 0x6},
 958          {110, 0x5},
 959          {104, 0x5},
 960          {98, 0x5},
 961          {110, 0x4},
 962          {104, 0x4},
 963          {98, 0x4},
 964          {110, 0x3},
 965          {104, 0x3},
 966          {98, 0x3},
 967          {110, 0x2},
 968          {104, 0x2},
 969          {98, 0x2},
 970          {110, 0x1},
 971          {104, 0x1},
 972          {98, 0x1},
 973          {110, 0x0},
 974          {104, 0x0},
 975          {98, 0x0},
 976          {97, 0},
 977          {96, 0},
 978          {95, 0},
 979          {94, 0},
 980          {93, 0},
 981          {92, 0},
 982          {91, 0},
 983          {90, 0},
 984          {89, 0},
 985          {88, 0},
 986          {87, 0},
 987          {86, 0},
 988          {85, 0},
 989          {84, 0},
 990          {83, 0},
 991          {82, 0},
 992          {81, 0},
 993          {80, 0},
 994          {79, 0},
 995          {78, 0},
 996          {77, 0},
 997          {76, 0},
 998          {75, 0},
 999          {74, 0},
1000          {73, 0},
1001          {72, 0},
1002          {71, 0},
1003          {70, 0},
1004          {69, 0},
1005          {68, 0},
1006          {67, 0},
1007          {66, 0},
1008          {65, 0},
1009          {64, 0},
1010          {63, 0},
1011          {62, 0},
1012          {61, 0},
1013          {60, 0},
1014          {59, 0},
1015          }
1016 };
1017
1018 static int
1019 il4965_fill_txpower_tbl(struct il_priv *il, u8 band, u16 channel, u8 is_ht40,
1020                         u8 ctrl_chan_high,
1021                         struct il4965_tx_power_db *tx_power_tbl)
1022 {
1023         u8 saturation_power;
1024         s32 target_power;
1025         s32 user_target_power;
1026         s32 power_limit;
1027         s32 current_temp;
1028         s32 reg_limit;
1029         s32 current_regulatory;
1030         s32 txatten_grp = CALIB_CH_GROUP_MAX;
1031         int i;
1032         int c;
1033         const struct il_channel_info *ch_info = NULL;
1034         struct il_eeprom_calib_ch_info ch_eeprom_info;
1035         const struct il_eeprom_calib_measure *measurement;
1036         s16 voltage;
1037         s32 init_voltage;
1038         s32 voltage_compensation;
1039         s32 degrees_per_05db_num;
1040         s32 degrees_per_05db_denom;
1041         s32 factory_temp;
1042         s32 temperature_comp[2];
1043         s32 factory_gain_idx[2];
1044         s32 factory_actual_pwr[2];
1045         s32 power_idx;
1046
1047         /* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units
1048          *   are used for idxing into txpower table) */
1049         user_target_power = 2 * il->tx_power_user_lmt;
1050
1051         /* Get current (RXON) channel, band, width */
1052         D_TXPOWER("chan %d band %d is_ht40 %d\n", channel, band, is_ht40);
1053
1054         ch_info = il_get_channel_info(il, il->band, channel);
1055
1056         if (!il_is_channel_valid(ch_info))
1057                 return -EINVAL;
1058
1059         /* get txatten group, used to select 1) thermal txpower adjustment
1060          *   and 2) mimo txpower balance between Tx chains. */
1061         txatten_grp = il4965_get_tx_atten_grp(channel);
1062         if (txatten_grp < 0) {
1063                 IL_ERR("Can't find txatten group for channel %d.\n", channel);
1064                 return txatten_grp;
1065         }
1066
1067         D_TXPOWER("channel %d belongs to txatten group %d\n", channel,
1068                   txatten_grp);
1069
1070         if (is_ht40) {
1071                 if (ctrl_chan_high)
1072                         channel -= 2;
1073                 else
1074                         channel += 2;
1075         }
1076
1077         /* hardware txpower limits ...
1078          * saturation (clipping distortion) txpowers are in half-dBm */
1079         if (band)
1080                 saturation_power = il->calib_info->saturation_power24;
1081         else
1082                 saturation_power = il->calib_info->saturation_power52;
1083
1084         if (saturation_power < IL_TX_POWER_SATURATION_MIN ||
1085             saturation_power > IL_TX_POWER_SATURATION_MAX) {
1086                 if (band)
1087                         saturation_power = IL_TX_POWER_DEFAULT_SATURATION_24;
1088                 else
1089                         saturation_power = IL_TX_POWER_DEFAULT_SATURATION_52;
1090         }
1091
1092         /* regulatory txpower limits ... reg_limit values are in half-dBm,
1093          *   max_power_avg values are in dBm, convert * 2 */
1094         if (is_ht40)
1095                 reg_limit = ch_info->ht40_max_power_avg * 2;
1096         else
1097                 reg_limit = ch_info->max_power_avg * 2;
1098
1099         if ((reg_limit < IL_TX_POWER_REGULATORY_MIN) ||
1100             (reg_limit > IL_TX_POWER_REGULATORY_MAX)) {
1101                 if (band)
1102                         reg_limit = IL_TX_POWER_DEFAULT_REGULATORY_24;
1103                 else
1104                         reg_limit = IL_TX_POWER_DEFAULT_REGULATORY_52;
1105         }
1106
1107         /* Interpolate txpower calibration values for this channel,
1108          *   based on factory calibration tests on spaced channels. */
1109         il4965_interpolate_chan(il, channel, &ch_eeprom_info);
1110
1111         /* calculate tx gain adjustment based on power supply voltage */
1112         voltage = le16_to_cpu(il->calib_info->voltage);
1113         init_voltage = (s32) le32_to_cpu(il->card_alive_init.voltage);
1114         voltage_compensation =
1115             il4965_get_voltage_compensation(voltage, init_voltage);
1116
1117         D_TXPOWER("curr volt %d eeprom volt %d volt comp %d\n", init_voltage,
1118                   voltage, voltage_compensation);
1119
1120         /* get current temperature (Celsius) */
1121         current_temp = max(il->temperature, IL_TX_POWER_TEMPERATURE_MIN);
1122         current_temp = min(il->temperature, IL_TX_POWER_TEMPERATURE_MAX);
1123         current_temp = KELVIN_TO_CELSIUS(current_temp);
1124
1125         /* select thermal txpower adjustment params, based on channel group
1126          *   (same frequency group used for mimo txatten adjustment) */
1127         degrees_per_05db_num =
1128             tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
1129         degrees_per_05db_denom =
1130             tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
1131
1132         /* get per-chain txpower values from factory measurements */
1133         for (c = 0; c < 2; c++) {
1134                 measurement = &ch_eeprom_info.measurements[c][1];
1135
1136                 /* txgain adjustment (in half-dB steps) based on difference
1137                  *   between factory and current temperature */
1138                 factory_temp = measurement->temperature;
1139                 il4965_math_div_round((current_temp -
1140                                        factory_temp) * degrees_per_05db_denom,
1141                                       degrees_per_05db_num,
1142                                       &temperature_comp[c]);
1143
1144                 factory_gain_idx[c] = measurement->gain_idx;
1145                 factory_actual_pwr[c] = measurement->actual_pow;
1146
1147                 D_TXPOWER("chain = %d\n", c);
1148                 D_TXPOWER("fctry tmp %d, " "curr tmp %d, comp %d steps\n",
1149                           factory_temp, current_temp, temperature_comp[c]);
1150
1151                 D_TXPOWER("fctry idx %d, fctry pwr %d\n", factory_gain_idx[c],
1152                           factory_actual_pwr[c]);
1153         }
1154
1155         /* for each of 33 bit-rates (including 1 for CCK) */
1156         for (i = 0; i < POWER_TBL_NUM_ENTRIES; i++) {
1157                 u8 is_mimo_rate;
1158                 union il4965_tx_power_dual_stream tx_power;
1159
1160                 /* for mimo, reduce each chain's txpower by half
1161                  * (3dB, 6 steps), so total output power is regulatory
1162                  * compliant. */
1163                 if (i & 0x8) {
1164                         current_regulatory =
1165                             reg_limit -
1166                             IL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
1167                         is_mimo_rate = 1;
1168                 } else {
1169                         current_regulatory = reg_limit;
1170                         is_mimo_rate = 0;
1171                 }
1172
1173                 /* find txpower limit, either hardware or regulatory */
1174                 power_limit = saturation_power - back_off_table[i];
1175                 if (power_limit > current_regulatory)
1176                         power_limit = current_regulatory;
1177
1178                 /* reduce user's txpower request if necessary
1179                  * for this rate on this channel */
1180                 target_power = user_target_power;
1181                 if (target_power > power_limit)
1182                         target_power = power_limit;
1183
1184                 D_TXPOWER("rate %d sat %d reg %d usr %d tgt %d\n", i,
1185                           saturation_power - back_off_table[i],
1186                           current_regulatory, user_target_power, target_power);
1187
1188                 /* for each of 2 Tx chains (radio transmitters) */
1189                 for (c = 0; c < 2; c++) {
1190                         s32 atten_value;
1191
1192                         if (is_mimo_rate)
1193                                 atten_value =
1194                                     (s32) le32_to_cpu(il->card_alive_init.
1195                                                       tx_atten[txatten_grp][c]);
1196                         else
1197                                 atten_value = 0;
1198
1199                         /* calculate idx; higher idx means lower txpower */
1200                         power_idx =
1201                             (u8) (factory_gain_idx[c] -
1202                                   (target_power - factory_actual_pwr[c]) -
1203                                   temperature_comp[c] - voltage_compensation +
1204                                   atten_value);
1205
1206 /*                      D_TXPOWER("calculated txpower idx %d\n",
1207                                                 power_idx); */
1208
1209                         if (power_idx < get_min_power_idx(i, band))
1210                                 power_idx = get_min_power_idx(i, band);
1211
1212                         /* adjust 5 GHz idx to support negative idxes */
1213                         if (!band)
1214                                 power_idx += 9;
1215
1216                         /* CCK, rate 32, reduce txpower for CCK */
1217                         if (i == POWER_TBL_CCK_ENTRY)
1218                                 power_idx +=
1219                                     IL_TX_POWER_CCK_COMPENSATION_C_STEP;
1220
1221                         /* stay within the table! */
1222                         if (power_idx > 107) {
1223                                 IL_WARN("txpower idx %d > 107\n", power_idx);
1224                                 power_idx = 107;
1225                         }
1226                         if (power_idx < 0) {
1227                                 IL_WARN("txpower idx %d < 0\n", power_idx);
1228                                 power_idx = 0;
1229                         }
1230
1231                         /* fill txpower command for this rate/chain */
1232                         tx_power.s.radio_tx_gain[c] =
1233                             gain_table[band][power_idx].radio;
1234                         tx_power.s.dsp_predis_atten[c] =
1235                             gain_table[band][power_idx].dsp;
1236
1237                         D_TXPOWER("chain %d mimo %d idx %d "
1238                                   "gain 0x%02x dsp %d\n", c, atten_value,
1239                                   power_idx, tx_power.s.radio_tx_gain[c],
1240                                   tx_power.s.dsp_predis_atten[c]);
1241                 }               /* for each chain */
1242
1243                 tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
1244
1245         }                       /* for each rate */
1246
1247         return 0;
1248 }
1249
1250 /**
1251  * il4965_send_tx_power - Configure the TXPOWER level user limit
1252  *
1253  * Uses the active RXON for channel, band, and characteristics (ht40, high)
1254  * The power limit is taken from il->tx_power_user_lmt.
1255  */
1256 static int
1257 il4965_send_tx_power(struct il_priv *il)
1258 {
1259         struct il4965_txpowertable_cmd cmd = { 0 };
1260         int ret;
1261         u8 band = 0;
1262         bool is_ht40 = false;
1263         u8 ctrl_chan_high = 0;
1264
1265         if (WARN_ONCE
1266             (test_bit(S_SCAN_HW, &il->status),
1267              "TX Power requested while scanning!\n"))
1268                 return -EAGAIN;
1269
1270         band = il->band == IEEE80211_BAND_2GHZ;
1271
1272         is_ht40 = iw4965_is_ht40_channel(il->active.flags);
1273
1274         if (is_ht40 && (il->active.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
1275                 ctrl_chan_high = 1;
1276
1277         cmd.band = band;
1278         cmd.channel = il->active.channel;
1279
1280         ret =
1281             il4965_fill_txpower_tbl(il, band, le16_to_cpu(il->active.channel),
1282                                     is_ht40, ctrl_chan_high, &cmd.tx_power);
1283         if (ret)
1284                 goto out;
1285
1286         ret = il_send_cmd_pdu(il, C_TX_PWR_TBL, sizeof(cmd), &cmd);
1287
1288 out:
1289         return ret;
1290 }
1291
1292 static int
1293 il4965_send_rxon_assoc(struct il_priv *il)
1294 {
1295         int ret = 0;
1296         struct il4965_rxon_assoc_cmd rxon_assoc;
1297         const struct il_rxon_cmd *rxon1 = &il->staging;
1298         const struct il_rxon_cmd *rxon2 = &il->active;
1299
1300         if (rxon1->flags == rxon2->flags &&
1301             rxon1->filter_flags == rxon2->filter_flags &&
1302             rxon1->cck_basic_rates == rxon2->cck_basic_rates &&
1303             rxon1->ofdm_ht_single_stream_basic_rates ==
1304             rxon2->ofdm_ht_single_stream_basic_rates &&
1305             rxon1->ofdm_ht_dual_stream_basic_rates ==
1306             rxon2->ofdm_ht_dual_stream_basic_rates &&
1307             rxon1->rx_chain == rxon2->rx_chain &&
1308             rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) {
1309                 D_INFO("Using current RXON_ASSOC.  Not resending.\n");
1310                 return 0;
1311         }
1312
1313         rxon_assoc.flags = il->staging.flags;
1314         rxon_assoc.filter_flags = il->staging.filter_flags;
1315         rxon_assoc.ofdm_basic_rates = il->staging.ofdm_basic_rates;
1316         rxon_assoc.cck_basic_rates = il->staging.cck_basic_rates;
1317         rxon_assoc.reserved = 0;
1318         rxon_assoc.ofdm_ht_single_stream_basic_rates =
1319             il->staging.ofdm_ht_single_stream_basic_rates;
1320         rxon_assoc.ofdm_ht_dual_stream_basic_rates =
1321             il->staging.ofdm_ht_dual_stream_basic_rates;
1322         rxon_assoc.rx_chain_select_flags = il->staging.rx_chain;
1323
1324         ret =
1325             il_send_cmd_pdu_async(il, C_RXON_ASSOC, sizeof(rxon_assoc),
1326                                   &rxon_assoc, NULL);
1327
1328         return ret;
1329 }
1330
1331 static int
1332 il4965_commit_rxon(struct il_priv *il)
1333 {
1334         /* cast away the const for active_rxon in this function */
1335         struct il_rxon_cmd *active_rxon = (void *)&il->active;
1336         int ret;
1337         bool new_assoc = !!(il->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
1338
1339         if (!il_is_alive(il))
1340                 return -EBUSY;
1341
1342         /* always get timestamp with Rx frame */
1343         il->staging.flags |= RXON_FLG_TSF2HOST_MSK;
1344
1345         ret = il_check_rxon_cmd(il);
1346         if (ret) {
1347                 IL_ERR("Invalid RXON configuration.  Not committing.\n");
1348                 return -EINVAL;
1349         }
1350
1351         /*
1352          * receive commit_rxon request
1353          * abort any previous channel switch if still in process
1354          */
1355         if (test_bit(S_CHANNEL_SWITCH_PENDING, &il->status) &&
1356             il->switch_channel != il->staging.channel) {
1357                 D_11H("abort channel switch on %d\n",
1358                       le16_to_cpu(il->switch_channel));
1359                 il_chswitch_done(il, false);
1360         }
1361
1362         /* If we don't need to send a full RXON, we can use
1363          * il_rxon_assoc_cmd which is used to reconfigure filter
1364          * and other flags for the current radio configuration. */
1365         if (!il_full_rxon_required(il)) {
1366                 ret = il_send_rxon_assoc(il);
1367                 if (ret) {
1368                         IL_ERR("Error setting RXON_ASSOC (%d)\n", ret);
1369                         return ret;
1370                 }
1371
1372                 memcpy(active_rxon, &il->staging, sizeof(*active_rxon));
1373                 il_print_rx_config_cmd(il);
1374                 /*
1375                  * We do not commit tx power settings while channel changing,
1376                  * do it now if tx power changed.
1377                  */
1378                 il_set_tx_power(il, il->tx_power_next, false);
1379                 return 0;
1380         }
1381
1382         /* If we are currently associated and the new config requires
1383          * an RXON_ASSOC and the new config wants the associated mask enabled,
1384          * we must clear the associated from the active configuration
1385          * before we apply the new config */
1386         if (il_is_associated(il) && new_assoc) {
1387                 D_INFO("Toggling associated bit on current RXON\n");
1388                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1389
1390                 ret =
1391                     il_send_cmd_pdu(il, C_RXON,
1392                                     sizeof(struct il_rxon_cmd), active_rxon);
1393
1394                 /* If the mask clearing failed then we set
1395                  * active_rxon back to what it was previously */
1396                 if (ret) {
1397                         active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
1398                         IL_ERR("Error clearing ASSOC_MSK (%d)\n", ret);
1399                         return ret;
1400                 }
1401                 il_clear_ucode_stations(il);
1402                 il_restore_stations(il);
1403                 ret = il4965_restore_default_wep_keys(il);
1404                 if (ret) {
1405                         IL_ERR("Failed to restore WEP keys (%d)\n", ret);
1406                         return ret;
1407                 }
1408         }
1409
1410         D_INFO("Sending RXON\n" "* with%s RXON_FILTER_ASSOC_MSK\n"
1411                "* channel = %d\n" "* bssid = %pM\n", (new_assoc ? "" : "out"),
1412                le16_to_cpu(il->staging.channel), il->staging.bssid_addr);
1413
1414         il_set_rxon_hwcrypto(il, !il->cfg->mod_params->sw_crypto);
1415
1416         /* Apply the new configuration
1417          * RXON unassoc clears the station table in uCode so restoration of
1418          * stations is needed after it (the RXON command) completes
1419          */
1420         if (!new_assoc) {
1421                 ret =
1422                     il_send_cmd_pdu(il, C_RXON,
1423                                     sizeof(struct il_rxon_cmd), &il->staging);
1424                 if (ret) {
1425                         IL_ERR("Error setting new RXON (%d)\n", ret);
1426                         return ret;
1427                 }
1428                 D_INFO("Return from !new_assoc RXON.\n");
1429                 memcpy(active_rxon, &il->staging, sizeof(*active_rxon));
1430                 il_clear_ucode_stations(il);
1431                 il_restore_stations(il);
1432                 ret = il4965_restore_default_wep_keys(il);
1433                 if (ret) {
1434                         IL_ERR("Failed to restore WEP keys (%d)\n", ret);
1435                         return ret;
1436                 }
1437         }
1438         if (new_assoc) {
1439                 il->start_calib = 0;
1440                 /* Apply the new configuration
1441                  * RXON assoc doesn't clear the station table in uCode,
1442                  */
1443                 ret =
1444                     il_send_cmd_pdu(il, C_RXON,
1445                                     sizeof(struct il_rxon_cmd), &il->staging);
1446                 if (ret) {
1447                         IL_ERR("Error setting new RXON (%d)\n", ret);
1448                         return ret;
1449                 }
1450                 memcpy(active_rxon, &il->staging, sizeof(*active_rxon));
1451         }
1452         il_print_rx_config_cmd(il);
1453
1454         il4965_init_sensitivity(il);
1455
1456         /* If we issue a new RXON command which required a tune then we must
1457          * send a new TXPOWER command or we won't be able to Tx any frames */
1458         ret = il_set_tx_power(il, il->tx_power_next, true);
1459         if (ret) {
1460                 IL_ERR("Error sending TX power (%d)\n", ret);
1461                 return ret;
1462         }
1463
1464         return 0;
1465 }
1466
1467 static int
1468 il4965_hw_channel_switch(struct il_priv *il,
1469                          struct ieee80211_channel_switch *ch_switch)
1470 {
1471         int rc;
1472         u8 band = 0;
1473         bool is_ht40 = false;
1474         u8 ctrl_chan_high = 0;
1475         struct il4965_channel_switch_cmd cmd;
1476         const struct il_channel_info *ch_info;
1477         u32 switch_time_in_usec, ucode_switch_time;
1478         u16 ch;
1479         u32 tsf_low;
1480         u8 switch_count;
1481         u16 beacon_interval = le16_to_cpu(il->timing.beacon_interval);
1482         struct ieee80211_vif *vif = il->vif;
1483         band = (il->band == IEEE80211_BAND_2GHZ);
1484
1485         if (WARN_ON_ONCE(vif == NULL))
1486                 return -EIO;
1487
1488         is_ht40 = iw4965_is_ht40_channel(il->staging.flags);
1489
1490         if (is_ht40 && (il->staging.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
1491                 ctrl_chan_high = 1;
1492
1493         cmd.band = band;
1494         cmd.expect_beacon = 0;
1495         ch = ch_switch->chandef.chan->hw_value;
1496         cmd.channel = cpu_to_le16(ch);
1497         cmd.rxon_flags = il->staging.flags;
1498         cmd.rxon_filter_flags = il->staging.filter_flags;
1499         switch_count = ch_switch->count;
1500         tsf_low = ch_switch->timestamp & 0x0ffffffff;
1501         /*
1502          * calculate the ucode channel switch time
1503          * adding TSF as one of the factor for when to switch
1504          */
1505         if (il->ucode_beacon_time > tsf_low && beacon_interval) {
1506                 if (switch_count >
1507                     ((il->ucode_beacon_time - tsf_low) / beacon_interval)) {
1508                         switch_count -=
1509                             (il->ucode_beacon_time - tsf_low) / beacon_interval;
1510                 } else
1511                         switch_count = 0;
1512         }
1513         if (switch_count <= 1)
1514                 cmd.switch_time = cpu_to_le32(il->ucode_beacon_time);
1515         else {
1516                 switch_time_in_usec =
1517                     vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
1518                 ucode_switch_time =
1519                     il_usecs_to_beacons(il, switch_time_in_usec,
1520                                         beacon_interval);
1521                 cmd.switch_time =
1522                     il_add_beacon_time(il, il->ucode_beacon_time,
1523                                        ucode_switch_time, beacon_interval);
1524         }
1525         D_11H("uCode time for the switch is 0x%x\n", cmd.switch_time);
1526         ch_info = il_get_channel_info(il, il->band, ch);
1527         if (ch_info)
1528                 cmd.expect_beacon = il_is_channel_radar(ch_info);
1529         else {
1530                 IL_ERR("invalid channel switch from %u to %u\n",
1531                        il->active.channel, ch);
1532                 return -EFAULT;
1533         }
1534
1535         rc = il4965_fill_txpower_tbl(il, band, ch, is_ht40, ctrl_chan_high,
1536                                      &cmd.tx_power);
1537         if (rc) {
1538                 D_11H("error:%d  fill txpower_tbl\n", rc);
1539                 return rc;
1540         }
1541
1542         return il_send_cmd_pdu(il, C_CHANNEL_SWITCH, sizeof(cmd), &cmd);
1543 }
1544
1545 /**
1546  * il4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
1547  */
1548 static void
1549 il4965_txq_update_byte_cnt_tbl(struct il_priv *il, struct il_tx_queue *txq,
1550                                u16 byte_cnt)
1551 {
1552         struct il4965_scd_bc_tbl *scd_bc_tbl = il->scd_bc_tbls.addr;
1553         int txq_id = txq->q.id;
1554         int write_ptr = txq->q.write_ptr;
1555         int len = byte_cnt + IL_TX_CRC_SIZE + IL_TX_DELIMITER_SIZE;
1556         __le16 bc_ent;
1557
1558         WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
1559
1560         bc_ent = cpu_to_le16(len & 0xFFF);
1561         /* Set up byte count within first 256 entries */
1562         scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent;
1563
1564         /* If within first 64 entries, duplicate at end */
1565         if (write_ptr < TFD_QUEUE_SIZE_BC_DUP)
1566                 scd_bc_tbl[txq_id].tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] =
1567                     bc_ent;
1568 }
1569
1570 /**
1571  * il4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
1572  * @stats: Provides the temperature reading from the uCode
1573  *
1574  * A return of <0 indicates bogus data in the stats
1575  */
1576 static int
1577 il4965_hw_get_temperature(struct il_priv *il)
1578 {
1579         s32 temperature;
1580         s32 vt;
1581         s32 R1, R2, R3;
1582         u32 R4;
1583
1584         if (test_bit(S_TEMPERATURE, &il->status) &&
1585             (il->_4965.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK)) {
1586                 D_TEMP("Running HT40 temperature calibration\n");
1587                 R1 = (s32) le32_to_cpu(il->card_alive_init.therm_r1[1]);
1588                 R2 = (s32) le32_to_cpu(il->card_alive_init.therm_r2[1]);
1589                 R3 = (s32) le32_to_cpu(il->card_alive_init.therm_r3[1]);
1590                 R4 = le32_to_cpu(il->card_alive_init.therm_r4[1]);
1591         } else {
1592                 D_TEMP("Running temperature calibration\n");
1593                 R1 = (s32) le32_to_cpu(il->card_alive_init.therm_r1[0]);
1594                 R2 = (s32) le32_to_cpu(il->card_alive_init.therm_r2[0]);
1595                 R3 = (s32) le32_to_cpu(il->card_alive_init.therm_r3[0]);
1596                 R4 = le32_to_cpu(il->card_alive_init.therm_r4[0]);
1597         }
1598
1599         /*
1600          * Temperature is only 23 bits, so sign extend out to 32.
1601          *
1602          * NOTE If we haven't received a stats notification yet
1603          * with an updated temperature, use R4 provided to us in the
1604          * "initialize" ALIVE response.
1605          */
1606         if (!test_bit(S_TEMPERATURE, &il->status))
1607                 vt = sign_extend32(R4, 23);
1608         else
1609                 vt = sign_extend32(le32_to_cpu
1610                                    (il->_4965.stats.general.common.temperature),
1611                                    23);
1612
1613         D_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
1614
1615         if (R3 == R1) {
1616                 IL_ERR("Calibration conflict R1 == R3\n");
1617                 return -1;
1618         }
1619
1620         /* Calculate temperature in degrees Kelvin, adjust by 97%.
1621          * Add offset to center the adjustment around 0 degrees Centigrade. */
1622         temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
1623         temperature /= (R3 - R1);
1624         temperature =
1625             (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
1626
1627         D_TEMP("Calibrated temperature: %dK, %dC\n", temperature,
1628                KELVIN_TO_CELSIUS(temperature));
1629
1630         return temperature;
1631 }
1632
1633 /* Adjust Txpower only if temperature variance is greater than threshold. */
1634 #define IL_TEMPERATURE_THRESHOLD   3
1635
1636 /**
1637  * il4965_is_temp_calib_needed - determines if new calibration is needed
1638  *
1639  * If the temperature changed has changed sufficiently, then a recalibration
1640  * is needed.
1641  *
1642  * Assumes caller will replace il->last_temperature once calibration
1643  * executed.
1644  */
1645 static int
1646 il4965_is_temp_calib_needed(struct il_priv *il)
1647 {
1648         int temp_diff;
1649
1650         if (!test_bit(S_STATS, &il->status)) {
1651                 D_TEMP("Temperature not updated -- no stats.\n");
1652                 return 0;
1653         }
1654
1655         temp_diff = il->temperature - il->last_temperature;
1656
1657         /* get absolute value */
1658         if (temp_diff < 0) {
1659                 D_POWER("Getting cooler, delta %d\n", temp_diff);
1660                 temp_diff = -temp_diff;
1661         } else if (temp_diff == 0)
1662                 D_POWER("Temperature unchanged\n");
1663         else
1664                 D_POWER("Getting warmer, delta %d\n", temp_diff);
1665
1666         if (temp_diff < IL_TEMPERATURE_THRESHOLD) {
1667                 D_POWER(" => thermal txpower calib not needed\n");
1668                 return 0;
1669         }
1670
1671         D_POWER(" => thermal txpower calib needed\n");
1672
1673         return 1;
1674 }
1675
1676 void
1677 il4965_temperature_calib(struct il_priv *il)
1678 {
1679         s32 temp;
1680
1681         temp = il4965_hw_get_temperature(il);
1682         if (IL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp))
1683                 return;
1684
1685         if (il->temperature != temp) {
1686                 if (il->temperature)
1687                         D_TEMP("Temperature changed " "from %dC to %dC\n",
1688                                KELVIN_TO_CELSIUS(il->temperature),
1689                                KELVIN_TO_CELSIUS(temp));
1690                 else
1691                         D_TEMP("Temperature " "initialized to %dC\n",
1692                                KELVIN_TO_CELSIUS(temp));
1693         }
1694
1695         il->temperature = temp;
1696         set_bit(S_TEMPERATURE, &il->status);
1697
1698         if (!il->disable_tx_power_cal &&
1699             unlikely(!test_bit(S_SCANNING, &il->status)) &&
1700             il4965_is_temp_calib_needed(il))
1701                 queue_work(il->workqueue, &il->txpower_work);
1702 }
1703
1704 static u16
1705 il4965_get_hcmd_size(u8 cmd_id, u16 len)
1706 {
1707         switch (cmd_id) {
1708         case C_RXON:
1709                 return (u16) sizeof(struct il4965_rxon_cmd);
1710         default:
1711                 return len;
1712         }
1713 }
1714
1715 static u16
1716 il4965_build_addsta_hcmd(const struct il_addsta_cmd *cmd, u8 * data)
1717 {
1718         struct il4965_addsta_cmd *addsta = (struct il4965_addsta_cmd *)data;
1719         addsta->mode = cmd->mode;
1720         memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
1721         memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo));
1722         addsta->station_flags = cmd->station_flags;
1723         addsta->station_flags_msk = cmd->station_flags_msk;
1724         addsta->tid_disable_tx = cmd->tid_disable_tx;
1725         addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
1726         addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
1727         addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
1728         addsta->sleep_tx_count = cmd->sleep_tx_count;
1729         addsta->reserved1 = cpu_to_le16(0);
1730         addsta->reserved2 = cpu_to_le16(0);
1731
1732         return (u16) sizeof(struct il4965_addsta_cmd);
1733 }
1734
1735 static void
1736 il4965_post_scan(struct il_priv *il)
1737 {
1738         /*
1739          * Since setting the RXON may have been deferred while
1740          * performing the scan, fire one off if needed
1741          */
1742         if (memcmp(&il->staging, &il->active, sizeof(il->staging)))
1743                 il_commit_rxon(il);
1744 }
1745
1746 static void
1747 il4965_post_associate(struct il_priv *il)
1748 {
1749         struct ieee80211_vif *vif = il->vif;
1750         int ret = 0;
1751
1752         if (!vif || !il->is_open)
1753                 return;
1754
1755         if (test_bit(S_EXIT_PENDING, &il->status))
1756                 return;
1757
1758         il_scan_cancel_timeout(il, 200);
1759
1760         il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1761         il_commit_rxon(il);
1762
1763         ret = il_send_rxon_timing(il);
1764         if (ret)
1765                 IL_WARN("RXON timing - " "Attempting to continue.\n");
1766
1767         il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
1768
1769         il_set_rxon_ht(il, &il->current_ht_config);
1770
1771         if (il->ops->set_rxon_chain)
1772                 il->ops->set_rxon_chain(il);
1773
1774         il->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
1775
1776         D_ASSOC("assoc id %d beacon interval %d\n", vif->bss_conf.aid,
1777                 vif->bss_conf.beacon_int);
1778
1779         if (vif->bss_conf.use_short_preamble)
1780                 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
1781         else
1782                 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
1783
1784         if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
1785                 if (vif->bss_conf.use_short_slot)
1786                         il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
1787                 else
1788                         il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
1789         }
1790
1791         il_commit_rxon(il);
1792
1793         D_ASSOC("Associated as %d to: %pM\n", vif->bss_conf.aid,
1794                 il->active.bssid_addr);
1795
1796         switch (vif->type) {
1797         case NL80211_IFTYPE_STATION:
1798                 break;
1799         case NL80211_IFTYPE_ADHOC:
1800                 il4965_send_beacon_cmd(il);
1801                 break;
1802         default:
1803                 IL_ERR("%s Should not be called in %d mode\n", __func__,
1804                        vif->type);
1805                 break;
1806         }
1807
1808         /* the chain noise calibration will enabled PM upon completion
1809          * If chain noise has already been run, then we need to enable
1810          * power management here */
1811         if (il->chain_noise_data.state == IL_CHAIN_NOISE_DONE)
1812                 il_power_update_mode(il, false);
1813
1814         /* Enable Rx differential gain and sensitivity calibrations */
1815         il4965_chain_noise_reset(il);
1816         il->start_calib = 1;
1817 }
1818
1819 static void
1820 il4965_config_ap(struct il_priv *il)
1821 {
1822         struct ieee80211_vif *vif = il->vif;
1823         int ret = 0;
1824
1825         lockdep_assert_held(&il->mutex);
1826
1827         if (test_bit(S_EXIT_PENDING, &il->status))
1828                 return;
1829
1830         /* The following should be done only at AP bring up */
1831         if (!il_is_associated(il)) {
1832
1833                 /* RXON - unassoc (to set timing command) */
1834                 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1835                 il_commit_rxon(il);
1836
1837                 /* RXON Timing */
1838                 ret = il_send_rxon_timing(il);
1839                 if (ret)
1840                         IL_WARN("RXON timing failed - "
1841                                 "Attempting to continue.\n");
1842
1843                 /* AP has all antennas */
1844                 il->chain_noise_data.active_chains = il->hw_params.valid_rx_ant;
1845                 il_set_rxon_ht(il, &il->current_ht_config);
1846                 if (il->ops->set_rxon_chain)
1847                         il->ops->set_rxon_chain(il);
1848
1849                 il->staging.assoc_id = 0;
1850
1851                 if (vif->bss_conf.use_short_preamble)
1852                         il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
1853                 else
1854                         il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
1855
1856                 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
1857                         if (vif->bss_conf.use_short_slot)
1858                                 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
1859                         else
1860                                 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
1861                 }
1862                 /* need to send beacon cmd before committing assoc RXON! */
1863                 il4965_send_beacon_cmd(il);
1864                 /* restore RXON assoc */
1865                 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
1866                 il_commit_rxon(il);
1867         }
1868         il4965_send_beacon_cmd(il);
1869 }
1870
1871 const struct il_ops il4965_ops = {
1872         .txq_update_byte_cnt_tbl = il4965_txq_update_byte_cnt_tbl,
1873         .txq_attach_buf_to_tfd = il4965_hw_txq_attach_buf_to_tfd,
1874         .txq_free_tfd = il4965_hw_txq_free_tfd,
1875         .txq_init = il4965_hw_tx_queue_init,
1876         .is_valid_rtc_data_addr = il4965_hw_valid_rtc_data_addr,
1877         .init_alive_start = il4965_init_alive_start,
1878         .load_ucode = il4965_load_bsm,
1879         .dump_nic_error_log = il4965_dump_nic_error_log,
1880         .dump_fh = il4965_dump_fh,
1881         .set_channel_switch = il4965_hw_channel_switch,
1882         .apm_init = il_apm_init,
1883         .send_tx_power = il4965_send_tx_power,
1884         .update_chain_flags = il4965_update_chain_flags,
1885         .eeprom_acquire_semaphore = il4965_eeprom_acquire_semaphore,
1886         .eeprom_release_semaphore = il4965_eeprom_release_semaphore,
1887
1888         .rxon_assoc = il4965_send_rxon_assoc,
1889         .commit_rxon = il4965_commit_rxon,
1890         .set_rxon_chain = il4965_set_rxon_chain,
1891
1892         .get_hcmd_size = il4965_get_hcmd_size,
1893         .build_addsta_hcmd = il4965_build_addsta_hcmd,
1894         .request_scan = il4965_request_scan,
1895         .post_scan = il4965_post_scan,
1896
1897         .post_associate = il4965_post_associate,
1898         .config_ap = il4965_config_ap,
1899         .manage_ibss_station = il4965_manage_ibss_station,
1900         .update_bcast_stations = il4965_update_bcast_stations,
1901
1902         .send_led_cmd = il4965_send_led_cmd,
1903 };
1904
1905 struct il_cfg il4965_cfg = {
1906         .name = "Intel(R) Wireless WiFi Link 4965AGN",
1907         .fw_name_pre = IL4965_FW_PRE,
1908         .ucode_api_max = IL4965_UCODE_API_MAX,
1909         .ucode_api_min = IL4965_UCODE_API_MIN,
1910         .sku = IL_SKU_A | IL_SKU_G | IL_SKU_N,
1911         .valid_tx_ant = ANT_AB,
1912         .valid_rx_ant = ANT_ABC,
1913         .eeprom_ver = EEPROM_4965_EEPROM_VERSION,
1914         .eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
1915         .mod_params = &il4965_mod_params,
1916         .led_mode = IL_LED_BLINK,
1917         /*
1918          * Force use of chains B and C for scan RX on 5 GHz band
1919          * because the device has off-channel reception on chain A.
1920          */
1921         .scan_rx_antennas[IEEE80211_BAND_5GHZ] = ANT_BC,
1922
1923         .eeprom_size = IL4965_EEPROM_IMG_SIZE,
1924         .num_of_queues = IL49_NUM_QUEUES,
1925         .num_of_ampdu_queues = IL49_NUM_AMPDU_QUEUES,
1926         .pll_cfg_val = 0,
1927         .set_l0s = true,
1928         .use_bsm = true,
1929         .led_compensation = 61,
1930         .chain_noise_num_beacons = IL4965_CAL_NUM_BEACONS,
1931         .wd_timeout = IL_DEF_WD_TIMEOUT,
1932         .temperature_kelvin = true,
1933         .ucode_tracing = true,
1934         .sensitivity_calib_by_driver = true,
1935         .chain_noise_calib_by_driver = true,
1936
1937         .regulatory_bands = {
1938                 EEPROM_REGULATORY_BAND_1_CHANNELS,
1939                 EEPROM_REGULATORY_BAND_2_CHANNELS,
1940                 EEPROM_REGULATORY_BAND_3_CHANNELS,
1941                 EEPROM_REGULATORY_BAND_4_CHANNELS,
1942                 EEPROM_REGULATORY_BAND_5_CHANNELS,
1943                 EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS,
1944                 EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS
1945         },
1946
1947 };
1948
1949 /* Module firmware */
1950 MODULE_FIRMWARE(IL4965_MODULE_FIRMWARE(IL4965_UCODE_API_MAX));