drivers/net/wireless/iwlegacy/3945-mac.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
   4  *
   5  * Portions of this file are derived from the ipw3945 project, as well
   6  * as portions of the ieee80211 subsystem header files.
   7  *
   8  * This program is free software; you can redistribute it and/or modify it
   9  * under the terms of version 2 of the GNU General Public License as
  10  * published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but WITHOUT
  13  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  15  * more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along with
  18  * this program; if not, write to the Free Software Foundation, Inc.,
  19  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  20  *
  21  * The full GNU General Public License is included in this distribution in the
  22  * file called LICENSE.
  23  *
  24  * Contact Information:
  25  *  Intel Linux Wireless <ilw@linux.intel.com>
  26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  27  *
  28  *****************************************************************************/
  29
  30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  31
  32 #include <linux/kernel.h>
  33 #include <linux/module.h>
  34 #include <linux/init.h>
  35 #include <linux/pci.h>
  36 #include <linux/pci-aspm.h>
  37 #include <linux/slab.h>
  38 #include <linux/dma-mapping.h>
  39 #include <linux/delay.h>
  40 #include <linux/sched.h>
  41 #include <linux/skbuff.h>
  42 #include <linux/netdevice.h>
  43 #include <linux/firmware.h>
  44 #include <linux/etherdevice.h>
  45 #include <linux/if_arp.h>
  46
  47 #include <net/ieee80211_radiotap.h>
  48 #include <net/mac80211.h>
  49
  50 #include <asm/div64.h>
  51
  52 #define DRV_NAME        "iwl3945"
  53
  54 #include "commands.h"
  55 #include "common.h"
  56 #include "3945.h"
  57 #include "iwl-spectrum.h"
  58
  59 /*
  60  * module name, copyright, version, etc.
  61  */
  62
  63 #define DRV_DESCRIPTION \
  64 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
  65
  66 #ifdef CONFIG_IWLEGACY_DEBUG
  67 #define VD "d"
  68 #else
  69 #define VD
  70 #endif
  71
  72 /*
  73  * add "s" to indicate spectrum measurement included.
  74  * we add it here to be consistent with previous releases in which
  75  * this was configurable.
  76  */
  77 #define DRV_VERSION  IWLWIFI_VERSION VD "s"
  78 #define DRV_COPYRIGHT   "Copyright(c) 2003-2011 Intel Corporation"
  79 #define DRV_AUTHOR     "<ilw@linux.intel.com>"
  80
  81 MODULE_DESCRIPTION(DRV_DESCRIPTION);
  82 MODULE_VERSION(DRV_VERSION);
  83 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
  84 MODULE_LICENSE("GPL");
  85
  86  /* module parameters */
  87 struct il_mod_params il3945_mod_params = {
  88         .sw_crypto = 1,
  89         .restart_fw = 1,
  90         .disable_hw_scan = 1,
  91         /* the rest are 0 by default */
  92 };
  93
  94 /**
  95  * il3945_get_antenna_flags - Get antenna flags for RXON command
  96  * @il: eeprom and antenna fields are used to determine antenna flags
  97  *
  98  * il->eeprom39  is used to determine if antenna AUX/MAIN are reversed
  99  * il3945_mod_params.antenna specifies the antenna diversity mode:
 100  *
 101  * IL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
 102  * IL_ANTENNA_MAIN      - Force MAIN antenna
 103  * IL_ANTENNA_AUX       - Force AUX antenna
 104  */
 105 __le32
 106 il3945_get_antenna_flags(const struct il_priv *il)
 107 {
 108         struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
 109
 110         switch (il3945_mod_params.antenna) {
 111         case IL_ANTENNA_DIVERSITY:
 112                 return 0;
 113
 114         case IL_ANTENNA_MAIN:
 115                 if (eeprom->antenna_switch_type)
 116                         return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
 117                 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
 118
 119         case IL_ANTENNA_AUX:
 120                 if (eeprom->antenna_switch_type)
 121                         return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
 122                 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
 123         }
 124
 125         /* bad antenna selector value */
 126         IL_ERR("Bad antenna selector value (0x%x)\n",
 127                il3945_mod_params.antenna);
 128
 129         return 0;               /* "diversity" is default if error */
 130 }
 131
 132 static int
 133 il3945_set_ccmp_dynamic_key_info(struct il_priv *il,
 134                                  struct ieee80211_key_conf *keyconf, u8 sta_id)
 135 {
 136         unsigned long flags;
 137         __le16 key_flags = 0;
 138         int ret;
 139
 140         key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
 141         key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
 142
 143         if (sta_id == il->hw_params.bcast_id)
 144                 key_flags |= STA_KEY_MULTICAST_MSK;
 145
 146         keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 147         keyconf->hw_key_idx = keyconf->keyidx;
 148         key_flags &= ~STA_KEY_FLG_INVALID;
 149
 150         spin_lock_irqsave(&il->sta_lock, flags);
 151         il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
 152         il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
 153         memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
 154
 155         memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen);
 156
 157         if ((il->stations[sta_id].sta.key.
 158              key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
 159                 il->stations[sta_id].sta.key.key_offset =
 160                     il_get_free_ucode_key_idx(il);
 161         /* else, we are overriding an existing key => no need to allocated room
 162          * in uCode. */
 163
 164         WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
 165              "no space for a new key");
 166
 167         il->stations[sta_id].sta.key.key_flags = key_flags;
 168         il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
 169         il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 170
 171         D_INFO("hwcrypto: modify ucode station key info\n");
 172
 173         ret = il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
 174
 175         spin_unlock_irqrestore(&il->sta_lock, flags);
 176
 177         return ret;
 178 }
 179
 180 static int
 181 il3945_set_tkip_dynamic_key_info(struct il_priv *il,
 182                                  struct ieee80211_key_conf *keyconf, u8 sta_id)
 183 {
 184         return -EOPNOTSUPP;
 185 }
 186
 187 static int
 188 il3945_set_wep_dynamic_key_info(struct il_priv *il,
 189                                 struct ieee80211_key_conf *keyconf, u8 sta_id)
 190 {
 191         return -EOPNOTSUPP;
 192 }
 193
 194 static int
 195 il3945_clear_sta_key_info(struct il_priv *il, u8 sta_id)
 196 {
 197         unsigned long flags;
 198         struct il_addsta_cmd sta_cmd;
 199
 200         spin_lock_irqsave(&il->sta_lock, flags);
 201         memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
 202         memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
 203         il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
 204         il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
 205         il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 206         memcpy(&sta_cmd, &il->stations[sta_id].sta,
 207                sizeof(struct il_addsta_cmd));
 208         spin_unlock_irqrestore(&il->sta_lock, flags);
 209
 210         D_INFO("hwcrypto: clear ucode station key info\n");
 211         return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
 212 }
 213
 214 static int
 215 il3945_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
 216                        u8 sta_id)
 217 {
 218         int ret = 0;
 219
 220         keyconf->hw_key_idx = HW_KEY_DYNAMIC;
 221
 222         switch (keyconf->cipher) {
 223         case WLAN_CIPHER_SUITE_CCMP:
 224                 ret = il3945_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
 225                 break;
 226         case WLAN_CIPHER_SUITE_TKIP:
 227                 ret = il3945_set_tkip_dynamic_key_info(il, keyconf, sta_id);
 228                 break;
 229         case WLAN_CIPHER_SUITE_WEP40:
 230         case WLAN_CIPHER_SUITE_WEP104:
 231                 ret = il3945_set_wep_dynamic_key_info(il, keyconf, sta_id);
 232                 break;
 233         default:
 234                 IL_ERR("Unknown alg: %s alg=%x\n", __func__, keyconf->cipher);
 235                 ret = -EINVAL;
 236         }
 237
 238         D_WEP("Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
 239               keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret);
 240
 241         return ret;
 242 }
 243
 244 static int
 245 il3945_remove_static_key(struct il_priv *il)
 246 {
 247         int ret = -EOPNOTSUPP;
 248
 249         return ret;
 250 }
 251
 252 static int
 253 il3945_set_static_key(struct il_priv *il, struct ieee80211_key_conf *key)
 254 {
 255         if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
 256             key->cipher == WLAN_CIPHER_SUITE_WEP104)
 257                 return -EOPNOTSUPP;
 258
 259         IL_ERR("Static key invalid: cipher %x\n", key->cipher);
 260         return -EINVAL;
 261 }
 262
 263 static void
 264 il3945_clear_free_frames(struct il_priv *il)
 265 {
 266         struct list_head *element;
 267
 268         D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count);
 269
 270         while (!list_empty(&il->free_frames)) {
 271                 element = il->free_frames.next;
 272                 list_del(element);
 273                 kfree(list_entry(element, struct il3945_frame, list));
 274                 il->frames_count--;
 275         }
 276
 277         if (il->frames_count) {
 278                 IL_WARN("%d frames still in use.  Did we lose one?\n",
 279                         il->frames_count);
 280                 il->frames_count = 0;
 281         }
 282 }
 283
 284 static struct il3945_frame *
 285 il3945_get_free_frame(struct il_priv *il)
 286 {
 287         struct il3945_frame *frame;
 288         struct list_head *element;
 289         if (list_empty(&il->free_frames)) {
 290                 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
 291                 if (!frame) {
 292                         IL_ERR("Could not allocate frame!\n");
 293                         return NULL;
 294                 }
 295
 296                 il->frames_count++;
 297                 return frame;
 298         }
 299
 300         element = il->free_frames.next;
 301         list_del(element);
 302         return list_entry(element, struct il3945_frame, list);
 303 }
 304
 305 static void
 306 il3945_free_frame(struct il_priv *il, struct il3945_frame *frame)
 307 {
 308         memset(frame, 0, sizeof(*frame));
 309         list_add(&frame->list, &il->free_frames);
 310 }
 311
 312 unsigned int
 313 il3945_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr,
 314                          int left)
 315 {
 316
 317         if (!il_is_associated(il) || !il->beacon_skb)
 318                 return 0;
 319
 320         if (il->beacon_skb->len > left)
 321                 return 0;
 322
 323         memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
 324
 325         return il->beacon_skb->len;
 326 }
 327
 328 static int
 329 il3945_send_beacon_cmd(struct il_priv *il)
 330 {
 331         struct il3945_frame *frame;
 332         unsigned int frame_size;
 333         int rc;
 334         u8 rate;
 335
 336         frame = il3945_get_free_frame(il);
 337
 338         if (!frame) {
 339                 IL_ERR("Could not obtain free frame buffer for beacon "
 340                        "command.\n");
 341                 return -ENOMEM;
 342         }
 343
 344         rate = il_get_lowest_plcp(il);
 345
 346         frame_size = il3945_hw_get_beacon_cmd(il, frame, rate);
 347
 348         rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]);
 349
 350         il3945_free_frame(il, frame);
 351
 352         return rc;
 353 }
 354
 355 static void
 356 il3945_unset_hw_params(struct il_priv *il)
 357 {
 358         if (il->_3945.shared_virt)
 359                 dma_free_coherent(&il->pci_dev->dev,
 360                                   sizeof(struct il3945_shared),
 361                                   il->_3945.shared_virt, il->_3945.shared_phys);
 362 }
 363
 364 static void
 365 il3945_build_tx_cmd_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info,
 366                              struct il_device_cmd *cmd,
 367                              struct sk_buff *skb_frag, int sta_id)
 368 {
 369         struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
 370         struct il_hw_key *keyinfo = &il->stations[sta_id].keyinfo;
 371
 372         tx_cmd->sec_ctl = 0;
 373
 374         switch (keyinfo->cipher) {
 375         case WLAN_CIPHER_SUITE_CCMP:
 376                 tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
 377                 memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
 378                 D_TX("tx_cmd with AES hwcrypto\n");
 379                 break;
 380
 381         case WLAN_CIPHER_SUITE_TKIP:
 382                 break;
 383
 384         case WLAN_CIPHER_SUITE_WEP104:
 385                 tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
 386                 /* fall through */
 387         case WLAN_CIPHER_SUITE_WEP40:
 388                 tx_cmd->sec_ctl |=
 389                     TX_CMD_SEC_WEP | (info->control.hw_key->
 390                                       hw_key_idx & TX_CMD_SEC_MSK) <<
 391                     TX_CMD_SEC_SHIFT;
 392
 393                 memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
 394
 395                 D_TX("Configuring packet for WEP encryption " "with key %d\n",
 396                      info->control.hw_key->hw_key_idx);
 397                 break;
 398
 399         default:
 400                 IL_ERR("Unknown encode cipher %x\n", keyinfo->cipher);
 401                 break;
 402         }
 403 }
 404
 405 /*
 406  * handle build C_TX command notification.
 407  */
 408 static void
 409 il3945_build_tx_cmd_basic(struct il_priv *il, struct il_device_cmd *cmd,
 410                           struct ieee80211_tx_info *info,
 411                           struct ieee80211_hdr *hdr, u8 std_id)
 412 {
 413         struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
 414         __le32 tx_flags = tx_cmd->tx_flags;
 415         __le16 fc = hdr->frame_control;
 416
 417         tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 418         if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
 419                 tx_flags |= TX_CMD_FLG_ACK_MSK;
 420                 if (ieee80211_is_mgmt(fc))
 421                         tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
 422                 if (ieee80211_is_probe_resp(fc) &&
 423                     !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
 424                         tx_flags |= TX_CMD_FLG_TSF_MSK;
 425         } else {
 426                 tx_flags &= (~TX_CMD_FLG_ACK_MSK);
 427                 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
 428         }
 429
 430         tx_cmd->sta_id = std_id;
 431         if (ieee80211_has_morefrags(fc))
 432                 tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
 433
 434         if (ieee80211_is_data_qos(fc)) {
 435                 u8 *qc = ieee80211_get_qos_ctl(hdr);
 436                 tx_cmd->tid_tspec = qc[0] & 0xf;
 437                 tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
 438         } else {
 439                 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
 440         }
 441
 442         il_tx_cmd_protection(il, info, fc, &tx_flags);
 443
 444         tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
 445         if (ieee80211_is_mgmt(fc)) {
 446                 if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
 447                         tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
 448                 else
 449                         tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
 450         } else {
 451                 tx_cmd->timeout.pm_frame_timeout = 0;
 452         }
 453
 454         tx_cmd->driver_txop = 0;
 455         tx_cmd->tx_flags = tx_flags;
 456         tx_cmd->next_frame_len = 0;
 457 }
 458
 459 /*
 460  * start C_TX command process
 461  */
 462 static int
 463 il3945_tx_skb(struct il_priv *il,
 464               struct ieee80211_sta *sta,
 465               struct sk_buff *skb)
 466 {
 467         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 468         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 469         struct il3945_tx_cmd *tx_cmd;
 470         struct il_tx_queue *txq = NULL;
 471         struct il_queue *q = NULL;
 472         struct il_device_cmd *out_cmd;
 473         struct il_cmd_meta *out_meta;
 474         dma_addr_t phys_addr;
 475         dma_addr_t txcmd_phys;
 476         int txq_id = skb_get_queue_mapping(skb);
 477         u16 len, idx, hdr_len;
 478         u16 firstlen, secondlen;
 479         u8 id;
 480         u8 unicast;
 481         u8 sta_id;
 482         u8 tid = 0;
 483         __le16 fc;
 484         u8 wait_write_ptr = 0;
 485         unsigned long flags;
 486
 487         spin_lock_irqsave(&il->lock, flags);
 488         if (il_is_rfkill(il)) {
 489                 D_DROP("Dropping - RF KILL\n");
 490                 goto drop_unlock;
 491         }
 492
 493         if ((ieee80211_get_tx_rate(il->hw, info)->hw_value & 0xFF) ==
 494             IL_INVALID_RATE) {
 495                 IL_ERR("ERROR: No TX rate available.\n");
 496                 goto drop_unlock;
 497         }
 498
 499         unicast = !is_multicast_ether_addr(hdr->addr1);
 500         id = 0;
 501
 502         fc = hdr->frame_control;
 503
 504 #ifdef CONFIG_IWLEGACY_DEBUG
 505         if (ieee80211_is_auth(fc))
 506                 D_TX("Sending AUTH frame\n");
 507         else if (ieee80211_is_assoc_req(fc))
 508                 D_TX("Sending ASSOC frame\n");
 509         else if (ieee80211_is_reassoc_req(fc))
 510                 D_TX("Sending REASSOC frame\n");
 511 #endif
 512
 513         spin_unlock_irqrestore(&il->lock, flags);
 514
 515         hdr_len = ieee80211_hdrlen(fc);
 516
 517         /* Find idx into station table for destination station */
 518         sta_id = il_sta_id_or_broadcast(il, sta);
 519         if (sta_id == IL_INVALID_STATION) {
 520                 D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1);
 521                 goto drop;
 522         }
 523
 524         D_RATE("station Id %d\n", sta_id);
 525
 526         if (ieee80211_is_data_qos(fc)) {
 527                 u8 *qc = ieee80211_get_qos_ctl(hdr);
 528                 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
 529                 if (unlikely(tid >= MAX_TID_COUNT))
 530                         goto drop;
 531         }
 532
 533         /* Descriptor for chosen Tx queue */
 534         txq = &il->txq[txq_id];
 535         q = &txq->q;
 536
 537         if ((il_queue_space(q) < q->high_mark))
 538                 goto drop;
 539
 540         spin_lock_irqsave(&il->lock, flags);
 541
 542         idx = il_get_cmd_idx(q, q->write_ptr, 0);
 543
 544         txq->skbs[q->write_ptr] = skb;
 545
 546         /* Init first empty entry in queue's array of Tx/cmd buffers */
 547         out_cmd = txq->cmd[idx];
 548         out_meta = &txq->meta[idx];
 549         tx_cmd = (struct il3945_tx_cmd *)out_cmd->cmd.payload;
 550         memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
 551         memset(tx_cmd, 0, sizeof(*tx_cmd));
 552
 553         /*
 554          * Set up the Tx-command (not MAC!) header.
 555          * Store the chosen Tx queue and TFD idx within the sequence field;
 556          * after Tx, uCode's Tx response will return this value so driver can
 557          * locate the frame within the tx queue and do post-tx processing.
 558          */
 559         out_cmd->hdr.cmd = C_TX;
 560         out_cmd->hdr.sequence =
 561             cpu_to_le16((u16)
 562                         (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr)));
 563
 564         /* Copy MAC header from skb into command buffer */
 565         memcpy(tx_cmd->hdr, hdr, hdr_len);
 566
 567         if (info->control.hw_key)
 568                 il3945_build_tx_cmd_hwcrypto(il, info, out_cmd, skb, sta_id);
 569
 570         /* TODO need this for burst mode later on */
 571         il3945_build_tx_cmd_basic(il, out_cmd, info, hdr, sta_id);
 572
 573         il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id);
 574
 575         /* Total # bytes to be transmitted */
 576         tx_cmd->len = cpu_to_le16((u16) skb->len);
 577
 578         tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
 579         tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
 580
 581         /*
 582          * Use the first empty entry in this queue's command buffer array
 583          * to contain the Tx command and MAC header concatenated together
 584          * (payload data will be in another buffer).
 585          * Size of this varies, due to varying MAC header length.
 586          * If end is not dword aligned, we'll have 2 extra bytes at the end
 587          * of the MAC header (device reads on dword boundaries).
 588          * We'll tell device about this padding later.
 589          */
 590         len =
 591             sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) +
 592             hdr_len;
 593         firstlen = (len + 3) & ~3;
 594
 595         /* Physical address of this Tx command's header (not MAC header!),
 596          * within command buffer array. */
 597         txcmd_phys =
 598             pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen,
 599                            PCI_DMA_TODEVICE);
 600         if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys)))
 601                 goto drop_unlock;
 602
 603         /* Set up TFD's 2nd entry to point directly to remainder of skb,
 604          * if any (802.11 null frames have no payload). */
 605         secondlen = skb->len - hdr_len;
 606         if (secondlen > 0) {
 607                 phys_addr =
 608                     pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen,
 609                                    PCI_DMA_TODEVICE);
 610                 if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr)))
 611                         goto drop_unlock;
 612         }
 613
 614         /* Add buffer containing Tx command and MAC(!) header to TFD's
 615          * first entry */
 616         il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
 617         dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
 618         dma_unmap_len_set(out_meta, len, firstlen);
 619         if (secondlen > 0)
 620                 il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0,
 621                                                U32_PAD(secondlen));
 622
 623         if (!ieee80211_has_morefrags(hdr->frame_control)) {
 624                 txq->need_update = 1;
 625         } else {
 626                 wait_write_ptr = 1;
 627                 txq->need_update = 0;
 628         }
 629
 630         il_update_stats(il, true, fc, skb->len);
 631
 632         D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence));
 633         D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
 634         il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd));
 635         il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr,
 636                           ieee80211_hdrlen(fc));
 637
 638         /* Tell device the write idx *just past* this latest filled TFD */
 639         q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
 640         il_txq_update_write_ptr(il, txq);
 641         spin_unlock_irqrestore(&il->lock, flags);
 642
 643         if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
 644                 if (wait_write_ptr) {
 645                         spin_lock_irqsave(&il->lock, flags);
 646                         txq->need_update = 1;
 647                         il_txq_update_write_ptr(il, txq);
 648                         spin_unlock_irqrestore(&il->lock, flags);
 649                 }
 650
 651                 il_stop_queue(il, txq);
 652         }
 653
 654         return 0;
 655
 656 drop_unlock:
 657         spin_unlock_irqrestore(&il->lock, flags);
 658 drop:
 659         return -1;
 660 }
 661
 662 static int
 663 il3945_get_measurement(struct il_priv *il,
 664                        struct ieee80211_measurement_params *params, u8 type)
 665 {
 666         struct il_spectrum_cmd spectrum;
 667         struct il_rx_pkt *pkt;
 668         struct il_host_cmd cmd = {
 669                 .id = C_SPECTRUM_MEASUREMENT,
 670                 .data = (void *)&spectrum,
 671                 .flags = CMD_WANT_SKB,
 672         };
 673         u32 add_time = le64_to_cpu(params->start_time);
 674         int rc;
 675         int spectrum_resp_status;
 676         int duration = le16_to_cpu(params->duration);
 677
 678         if (il_is_associated(il))
 679                 add_time =
 680                     il_usecs_to_beacons(il,
 681                                         le64_to_cpu(params->start_time) -
 682                                         il->_3945.last_tsf,
 683                                         le16_to_cpu(il->timing.beacon_interval));
 684
 685         memset(&spectrum, 0, sizeof(spectrum));
 686
 687         spectrum.channel_count = cpu_to_le16(1);
 688         spectrum.flags =
 689             RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
 690         spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
 691         cmd.len = sizeof(spectrum);
 692         spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
 693
 694         if (il_is_associated(il))
 695                 spectrum.start_time =
 696                     il_add_beacon_time(il, il->_3945.last_beacon_time, add_time,
 697                                        le16_to_cpu(il->timing.beacon_interval));
 698         else
 699                 spectrum.start_time = 0;
 700
 701         spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
 702         spectrum.channels[0].channel = params->channel;
 703         spectrum.channels[0].type = type;
 704         if (il->active.flags & RXON_FLG_BAND_24G_MSK)
 705                 spectrum.flags |=
 706                     RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK |
 707                     RXON_FLG_TGG_PROTECT_MSK;
 708
 709         rc = il_send_cmd_sync(il, &cmd);
 710         if (rc)
 711                 return rc;
 712
 713         pkt = (struct il_rx_pkt *)cmd.reply_page;
 714         if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
 715                 IL_ERR("Bad return from N_RX_ON_ASSOC command\n");
 716                 rc = -EIO;
 717         }
 718
 719         spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
 720         switch (spectrum_resp_status) {
 721         case 0:         /* Command will be handled */
 722                 if (pkt->u.spectrum.id != 0xff) {
 723                         D_INFO("Replaced existing measurement: %d\n",
 724                                pkt->u.spectrum.id);
 725                         il->measurement_status &= ~MEASUREMENT_READY;
 726                 }
 727                 il->measurement_status |= MEASUREMENT_ACTIVE;
 728                 rc = 0;
 729                 break;
 730
 731         case 1:         /* Command will not be handled */
 732                 rc = -EAGAIN;
 733                 break;
 734         }
 735
 736         il_free_pages(il, cmd.reply_page);
 737
 738         return rc;
 739 }
 740
 741 static void
 742 il3945_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb)
 743 {
 744         struct il_rx_pkt *pkt = rxb_addr(rxb);
 745         struct il_alive_resp *palive;
 746         struct delayed_work *pwork;
 747
 748         palive = &pkt->u.alive_frame;
 749
 750         D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n",
 751                palive->is_valid, palive->ver_type, palive->ver_subtype);
 752
 753         if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
 754                 D_INFO("Initialization Alive received.\n");
 755                 memcpy(&il->card_alive_init, &pkt->u.alive_frame,
 756                        sizeof(struct il_alive_resp));
 757                 pwork = &il->init_alive_start;
 758         } else {
 759                 D_INFO("Runtime Alive received.\n");
 760                 memcpy(&il->card_alive, &pkt->u.alive_frame,
 761                        sizeof(struct il_alive_resp));
 762                 pwork = &il->alive_start;
 763                 il3945_disable_events(il);
 764         }
 765
 766         /* We delay the ALIVE response by 5ms to
 767          * give the HW RF Kill time to activate... */
 768         if (palive->is_valid == UCODE_VALID_OK)
 769                 queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5));
 770         else
 771                 IL_WARN("uCode did not respond OK.\n");
 772 }
 773
 774 static void
 775 il3945_hdl_add_sta(struct il_priv *il, struct il_rx_buf *rxb)
 776 {
 777 #ifdef CONFIG_IWLEGACY_DEBUG
 778         struct il_rx_pkt *pkt = rxb_addr(rxb);
 779 #endif
 780
 781         D_RX("Received C_ADD_STA: 0x%02X\n", pkt->u.status);
 782 }
 783
 784 static void
 785 il3945_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb)
 786 {
 787         struct il_rx_pkt *pkt = rxb_addr(rxb);
 788         struct il3945_beacon_notif *beacon = &(pkt->u.beacon_status);
 789 #ifdef CONFIG_IWLEGACY_DEBUG
 790         u8 rate = beacon->beacon_notify_hdr.rate;
 791
 792         D_RX("beacon status %x retries %d iss %d " "tsf %d %d rate %d\n",
 793              le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
 794              beacon->beacon_notify_hdr.failure_frame,
 795              le32_to_cpu(beacon->ibss_mgr_status),
 796              le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate);
 797 #endif
 798
 799         il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
 800
 801 }
 802
 803 /* Handle notification from uCode that card's power state is changing
 804  * due to software, hardware, or critical temperature RFKILL */
 805 static void
 806 il3945_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb)
 807 {
 808         struct il_rx_pkt *pkt = rxb_addr(rxb);
 809         u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
 810         unsigned long status = il->status;
 811
 812         IL_WARN("Card state received: HW:%s SW:%s\n",
 813                 (flags & HW_CARD_DISABLED) ? "Kill" : "On",
 814                 (flags & SW_CARD_DISABLED) ? "Kill" : "On");
 815
 816         _il_wr(il, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
 817
 818         if (flags & HW_CARD_DISABLED)
 819                 set_bit(S_RFKILL, &il->status);
 820         else
 821                 clear_bit(S_RFKILL, &il->status);
 822
 823         il_scan_cancel(il);
 824
 825         if ((test_bit(S_RFKILL, &status) !=
 826              test_bit(S_RFKILL, &il->status)))
 827                 wiphy_rfkill_set_hw_state(il->hw->wiphy,
 828                                           test_bit(S_RFKILL, &il->status));
 829         else
 830                 wake_up(&il->wait_command_queue);
 831 }
 832
 833 /**
 834  * il3945_setup_handlers - Initialize Rx handler callbacks
 835  *
 836  * Setup the RX handlers for each of the reply types sent from the uCode
 837  * to the host.
 838  *
 839  * This function chains into the hardware specific files for them to setup
 840  * any hardware specific handlers as well.
 841  */
 842 static void
 843 il3945_setup_handlers(struct il_priv *il)
 844 {
 845         il->handlers[N_ALIVE] = il3945_hdl_alive;
 846         il->handlers[C_ADD_STA] = il3945_hdl_add_sta;
 847         il->handlers[N_ERROR] = il_hdl_error;
 848         il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa;
 849         il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement;
 850         il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep;
 851         il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats;
 852         il->handlers[N_BEACON] = il3945_hdl_beacon;
 853
 854         /*
 855          * The same handler is used for both the REPLY to a discrete
 856          * stats request from the host as well as for the periodic
 857          * stats notifications (after received beacons) from the uCode.
 858          */
 859         il->handlers[C_STATS] = il3945_hdl_c_stats;
 860         il->handlers[N_STATS] = il3945_hdl_stats;
 861
 862         il_setup_rx_scan_handlers(il);
 863         il->handlers[N_CARD_STATE] = il3945_hdl_card_state;
 864
 865         /* Set up hardware specific Rx handlers */
 866         il3945_hw_handler_setup(il);
 867 }
 868
 869 /************************** RX-FUNCTIONS ****************************/
 870 /*
 871  * Rx theory of operation
 872  *
 873  * The host allocates 32 DMA target addresses and passes the host address
 874  * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is
 875  * 0 to 31
 876  *
 877  * Rx Queue Indexes
 878  * The host/firmware share two idx registers for managing the Rx buffers.
 879  *
 880  * The READ idx maps to the first position that the firmware may be writing
 881  * to -- the driver can read up to (but not including) this position and get
 882  * good data.
 883  * The READ idx is managed by the firmware once the card is enabled.
 884  *
 885  * The WRITE idx maps to the last position the driver has read from -- the
 886  * position preceding WRITE is the last slot the firmware can place a packet.
 887  *
 888  * The queue is empty (no good data) if WRITE = READ - 1, and is full if
 889  * WRITE = READ.
 890  *
 891  * During initialization, the host sets up the READ queue position to the first
 892  * IDX position, and WRITE to the last (READ - 1 wrapped)
 893  *
 894  * When the firmware places a packet in a buffer, it will advance the READ idx
 895  * and fire the RX interrupt.  The driver can then query the READ idx and
 896  * process as many packets as possible, moving the WRITE idx forward as it
 897  * resets the Rx queue buffers with new memory.
 898  *
 899  * The management in the driver is as follows:
 900  * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free.  When
 901  *   iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
 902  *   to replenish the iwl->rxq->rx_free.
 903  * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the
 904  *   iwl->rxq is replenished and the READ IDX is updated (updating the
 905  *   'processed' and 'read' driver idxes as well)
 906  * + A received packet is processed and handed to the kernel network stack,
 907  *   detached from the iwl->rxq.  The driver 'processed' idx is updated.
 908  * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
 909  *   list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
 910  *   IDX is not incremented and iwl->status(RX_STALLED) is set.  If there
 911  *   were enough free buffers and RX_STALLED is set it is cleared.
 912  *
 913  *
 914  * Driver sequence:
 915  *
 916  * il3945_rx_replenish()     Replenishes rx_free list from rx_used, and calls
 917  *                            il3945_rx_queue_restock
 918  * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx
 919  *                            queue, updates firmware pointers, and updates
 920  *                            the WRITE idx.  If insufficient rx_free buffers
 921  *                            are available, schedules il3945_rx_replenish
 922  *
 923  * -- enable interrupts --
 924  * ISR - il3945_rx()         Detach il_rx_bufs from pool up to the
 925  *                            READ IDX, detaching the SKB from the pool.
 926  *                            Moves the packet buffer from queue to rx_used.
 927  *                            Calls il3945_rx_queue_restock to refill any empty
 928  *                            slots.
 929  * ...
 930  *
 931  */
 932
 933 /**
 934  * il3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
 935  */
 936 static inline __le32
 937 il3945_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr)
 938 {
 939         return cpu_to_le32((u32) dma_addr);
 940 }
 941
 942 /**
 943  * il3945_rx_queue_restock - refill RX queue from pre-allocated pool
 944  *
 945  * If there are slots in the RX queue that need to be restocked,
 946  * and we have free pre-allocated buffers, fill the ranks as much
 947  * as we can, pulling from rx_free.
 948  *
 949  * This moves the 'write' idx forward to catch up with 'processed', and
 950  * also updates the memory address in the firmware to reference the new
 951  * target buffer.
 952  */
 953 static void
 954 il3945_rx_queue_restock(struct il_priv *il)
 955 {
 956         struct il_rx_queue *rxq = &il->rxq;
 957         struct list_head *element;
 958         struct il_rx_buf *rxb;
 959         unsigned long flags;
 960         int write;
 961
 962         spin_lock_irqsave(&rxq->lock, flags);
 963         write = rxq->write & ~0x7;
 964         while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
 965                 /* Get next free Rx buffer, remove from free list */
 966                 element = rxq->rx_free.next;
 967                 rxb = list_entry(element, struct il_rx_buf, list);
 968                 list_del(element);
 969
 970                 /* Point to Rx buffer via next RBD in circular buffer */
 971                 rxq->bd[rxq->write] =
 972                     il3945_dma_addr2rbd_ptr(il, rxb->page_dma);
 973                 rxq->queue[rxq->write] = rxb;
 974                 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
 975                 rxq->free_count--;
 976         }
 977         spin_unlock_irqrestore(&rxq->lock, flags);
 978         /* If the pre-allocated buffer pool is dropping low, schedule to
 979          * refill it */
 980         if (rxq->free_count <= RX_LOW_WATERMARK)
 981                 queue_work(il->workqueue, &il->rx_replenish);
 982
 983         /* If we've added more space for the firmware to place data, tell it.
 984          * Increment device's write pointer in multiples of 8. */
 985         if (rxq->write_actual != (rxq->write & ~0x7) ||
 986             abs(rxq->write - rxq->read) > 7) {
 987                 spin_lock_irqsave(&rxq->lock, flags);
 988                 rxq->need_update = 1;
 989                 spin_unlock_irqrestore(&rxq->lock, flags);
 990                 il_rx_queue_update_write_ptr(il, rxq);
 991         }
 992 }
 993
 994 /**
 995  * il3945_rx_replenish - Move all used packet from rx_used to rx_free
 996  *
 997  * When moving to rx_free an SKB is allocated for the slot.
 998  *
 999  * Also restock the Rx queue via il3945_rx_queue_restock.
1000  * This is called as a scheduled work item (except for during initialization)
1001  */
1002 static void
1003 il3945_rx_allocate(struct il_priv *il, gfp_t priority)
1004 {
1005         struct il_rx_queue *rxq = &il->rxq;
1006         struct list_head *element;
1007         struct il_rx_buf *rxb;
1008         struct page *page;
1009         dma_addr_t page_dma;
1010         unsigned long flags;
1011         gfp_t gfp_mask = priority;
1012
1013         while (1) {
1014                 spin_lock_irqsave(&rxq->lock, flags);
1015                 if (list_empty(&rxq->rx_used)) {
1016                         spin_unlock_irqrestore(&rxq->lock, flags);
1017                         return;
1018                 }
1019                 spin_unlock_irqrestore(&rxq->lock, flags);
1020
1021                 if (rxq->free_count > RX_LOW_WATERMARK)
1022                         gfp_mask |= __GFP_NOWARN;
1023
1024                 if (il->hw_params.rx_page_order > 0)
1025                         gfp_mask |= __GFP_COMP;
1026
1027                 /* Alloc a new receive buffer */
1028                 page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
1029                 if (!page) {
1030                         if (net_ratelimit())
1031                                 D_INFO("Failed to allocate SKB buffer.\n");
1032                         if (rxq->free_count <= RX_LOW_WATERMARK &&
1033                             net_ratelimit())
1034                                 IL_ERR("Failed to allocate SKB buffer with %0x."
1035                                        "Only %u free buffers remaining.\n",
1036                                        priority, rxq->free_count);
1037                         /* We don't reschedule replenish work here -- we will
1038                          * call the restock method and if it still needs
1039                          * more buffers it will schedule replenish */
1040                         break;
1041                 }
1042
1043                 /* Get physical address of RB/SKB */
1044                 page_dma =
1045                     pci_map_page(il->pci_dev, page, 0,
1046                                  PAGE_SIZE << il->hw_params.rx_page_order,
1047                                  PCI_DMA_FROMDEVICE);
1048
1049                 if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) {
1050                         __free_pages(page, il->hw_params.rx_page_order);
1051                         break;
1052                 }
1053
1054                 spin_lock_irqsave(&rxq->lock, flags);
1055
1056                 if (list_empty(&rxq->rx_used)) {
1057                         spin_unlock_irqrestore(&rxq->lock, flags);
1058                         pci_unmap_page(il->pci_dev, page_dma,
1059                                        PAGE_SIZE << il->hw_params.rx_page_order,
1060                                        PCI_DMA_FROMDEVICE);
1061                         __free_pages(page, il->hw_params.rx_page_order);
1062                         return;
1063                 }
1064
1065                 element = rxq->rx_used.next;
1066                 rxb = list_entry(element, struct il_rx_buf, list);
1067                 list_del(element);
1068
1069                 rxb->page = page;
1070                 rxb->page_dma = page_dma;
1071                 list_add_tail(&rxb->list, &rxq->rx_free);
1072                 rxq->free_count++;
1073                 il->alloc_rxb_page++;
1074
1075                 spin_unlock_irqrestore(&rxq->lock, flags);
1076         }
1077 }
1078
1079 void
1080 il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
1081 {
1082         unsigned long flags;
1083         int i;
1084         spin_lock_irqsave(&rxq->lock, flags);
1085         INIT_LIST_HEAD(&rxq->rx_free);
1086         INIT_LIST_HEAD(&rxq->rx_used);
1087         /* Fill the rx_used queue with _all_ of the Rx buffers */
1088         for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
1089                 /* In the reset function, these buffers may have been allocated
1090                  * to an SKB, so we need to unmap and free potential storage */
1091                 if (rxq->pool[i].page != NULL) {
1092                         pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
1093                                        PAGE_SIZE << il->hw_params.rx_page_order,
1094                                        PCI_DMA_FROMDEVICE);
1095                         __il_free_pages(il, rxq->pool[i].page);
1096                         rxq->pool[i].page = NULL;
1097                 }
1098                 list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
1099         }
1100
1101         /* Set us so that we have processed and used all buffers, but have
1102          * not restocked the Rx queue with fresh buffers */
1103         rxq->read = rxq->write = 0;
1104         rxq->write_actual = 0;
1105         rxq->free_count = 0;
1106         spin_unlock_irqrestore(&rxq->lock, flags);
1107 }
1108
1109 void
1110 il3945_rx_replenish(void *data)
1111 {
1112         struct il_priv *il = data;
1113         unsigned long flags;
1114
1115         il3945_rx_allocate(il, GFP_KERNEL);
1116
1117         spin_lock_irqsave(&il->lock, flags);
1118         il3945_rx_queue_restock(il);
1119         spin_unlock_irqrestore(&il->lock, flags);
1120 }
1121
1122 static void
1123 il3945_rx_replenish_now(struct il_priv *il)
1124 {
1125         il3945_rx_allocate(il, GFP_ATOMIC);
1126
1127         il3945_rx_queue_restock(il);
1128 }
1129
1130 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
1131  * If an SKB has been detached, the POOL needs to have its SKB set to NULL
1132  * This free routine walks the list of POOL entries and if SKB is set to
1133  * non NULL it is unmapped and freed
1134  */
1135 static void
1136 il3945_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
1137 {
1138         int i;
1139         for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
1140                 if (rxq->pool[i].page != NULL) {
1141                         pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
1142                                        PAGE_SIZE << il->hw_params.rx_page_order,
1143                                        PCI_DMA_FROMDEVICE);
1144                         __il_free_pages(il, rxq->pool[i].page);
1145                         rxq->pool[i].page = NULL;
1146                 }
1147         }
1148
1149         dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
1150                           rxq->bd_dma);
1151         dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
1152                           rxq->rb_stts, rxq->rb_stts_dma);
1153         rxq->bd = NULL;
1154         rxq->rb_stts = NULL;
1155 }
1156
1157 /* Convert linear signal-to-noise ratio into dB */
1158 static u8 ratio2dB[100] = {
1159 /*       0   1   2   3   4   5   6   7   8   9 */
1160         0, 0, 6, 10, 12, 14, 16, 17, 18, 19,    /* 00 - 09 */
1161         20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
1162         26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
1163         29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
1164         32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
1165         34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
1166         36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
1167         37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
1168         38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
1169         39, 39, 39, 39, 39, 40, 40, 40, 40, 40  /* 90 - 99 */
1170 };
1171
1172 /* Calculates a relative dB value from a ratio of linear
1173  *   (i.e. not dB) signal levels.
1174  * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
1175 int
1176 il3945_calc_db_from_ratio(int sig_ratio)
1177 {
1178         /* 1000:1 or higher just report as 60 dB */
1179         if (sig_ratio >= 1000)
1180                 return 60;
1181
1182         /* 100:1 or higher, divide by 10 and use table,
1183          *   add 20 dB to make up for divide by 10 */
1184         if (sig_ratio >= 100)
1185                 return 20 + (int)ratio2dB[sig_ratio / 10];
1186
1187         /* We shouldn't see this */
1188         if (sig_ratio < 1)
1189                 return 0;
1190
1191         /* Use table for ratios 1:1 - 99:1 */
1192         return (int)ratio2dB[sig_ratio];
1193 }
1194
1195 /**
1196  * il3945_rx_handle - Main entry function for receiving responses from uCode
1197  *
1198  * Uses the il->handlers callback function array to invoke
1199  * the appropriate handlers, including command responses,
1200  * frame-received notifications, and other notifications.
1201  */
1202 static void
1203 il3945_rx_handle(struct il_priv *il)
1204 {
1205         struct il_rx_buf *rxb;
1206         struct il_rx_pkt *pkt;
1207         struct il_rx_queue *rxq = &il->rxq;
1208         u32 r, i;
1209         int reclaim;
1210         unsigned long flags;
1211         u8 fill_rx = 0;
1212         u32 count = 8;
1213         int total_empty = 0;
1214
1215         /* uCode's read idx (stored in shared DRAM) indicates the last Rx
1216          * buffer that the driver may process (last buffer filled by ucode). */
1217         r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
1218         i = rxq->read;
1219
1220         /* calculate total frames need to be restock after handling RX */
1221         total_empty = r - rxq->write_actual;
1222         if (total_empty < 0)
1223                 total_empty += RX_QUEUE_SIZE;
1224
1225         if (total_empty > (RX_QUEUE_SIZE / 2))
1226                 fill_rx = 1;
1227         /* Rx interrupt, but nothing sent from uCode */
1228         if (i == r)
1229                 D_RX("r = %d, i = %d\n", r, i);
1230
1231         while (i != r) {
1232                 int len;
1233
1234                 rxb = rxq->queue[i];
1235
1236                 /* If an RXB doesn't have a Rx queue slot associated with it,
1237                  * then a bug has been introduced in the queue refilling
1238                  * routines -- catch it here */
1239                 BUG_ON(rxb == NULL);
1240
1241                 rxq->queue[i] = NULL;
1242
1243                 pci_unmap_page(il->pci_dev, rxb->page_dma,
1244                                PAGE_SIZE << il->hw_params.rx_page_order,
1245                                PCI_DMA_FROMDEVICE);
1246                 pkt = rxb_addr(rxb);
1247
1248                 len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
1249                 len += sizeof(u32);     /* account for status word */
1250
1251                 /* Reclaim a command buffer only if this packet is a response
1252                  *   to a (driver-originated) command.
1253                  * If the packet (e.g. Rx frame) originated from uCode,
1254                  *   there is no command buffer to reclaim.
1255                  * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
1256                  *   but apparently a few don't get set; catch them here. */
1257                 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
1258                     pkt->hdr.cmd != N_STATS && pkt->hdr.cmd != C_TX;
1259
1260                 /* Based on type of command response or notification,
1261                  *   handle those that need handling via function in
1262                  *   handlers table.  See il3945_setup_handlers() */
1263                 if (il->handlers[pkt->hdr.cmd]) {
1264                         D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
1265                              il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
1266                         il->isr_stats.handlers[pkt->hdr.cmd]++;
1267                         il->handlers[pkt->hdr.cmd] (il, rxb);
1268                 } else {
1269                         /* No handling needed */
1270                         D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r,
1271                              i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
1272                 }
1273
1274                 /*
1275                  * XXX: After here, we should always check rxb->page
1276                  * against NULL before touching it or its virtual
1277                  * memory (pkt). Because some handler might have
1278                  * already taken or freed the pages.
1279                  */
1280
1281                 if (reclaim) {
1282                         /* Invoke any callbacks, transfer the buffer to caller,
1283                          * and fire off the (possibly) blocking il_send_cmd()
1284                          * as we reclaim the driver command queue */
1285                         if (rxb->page)
1286                                 il_tx_cmd_complete(il, rxb);
1287                         else
1288                                 IL_WARN("Claim null rxb?\n");
1289                 }
1290
1291                 /* Reuse the page if possible. For notification packets and
1292                  * SKBs that fail to Rx correctly, add them back into the
1293                  * rx_free list for reuse later. */
1294                 spin_lock_irqsave(&rxq->lock, flags);
1295                 if (rxb->page != NULL) {
1296                         rxb->page_dma =
1297                             pci_map_page(il->pci_dev, rxb->page, 0,
1298                                          PAGE_SIZE << il->hw_params.
1299                                          rx_page_order, PCI_DMA_FROMDEVICE);
1300                         if (unlikely(pci_dma_mapping_error(il->pci_dev,
1301                                                            rxb->page_dma))) {
1302                                 __il_free_pages(il, rxb->page);
1303                                 rxb->page = NULL;
1304                                 list_add_tail(&rxb->list, &rxq->rx_used);
1305                         } else {
1306                                 list_add_tail(&rxb->list, &rxq->rx_free);
1307                                 rxq->free_count++;
1308                         }
1309                 } else
1310                         list_add_tail(&rxb->list, &rxq->rx_used);
1311
1312                 spin_unlock_irqrestore(&rxq->lock, flags);
1313
1314                 i = (i + 1) & RX_QUEUE_MASK;
1315                 /* If there are a lot of unused frames,
1316                  * restock the Rx queue so ucode won't assert. */
1317                 if (fill_rx) {
1318                         count++;
1319                         if (count >= 8) {
1320                                 rxq->read = i;
1321                                 il3945_rx_replenish_now(il);
1322                                 count = 0;
1323                         }
1324                 }
1325         }
1326
1327         /* Backtrack one entry */
1328         rxq->read = i;
1329         if (fill_rx)
1330                 il3945_rx_replenish_now(il);
1331         else
1332                 il3945_rx_queue_restock(il);
1333 }
1334
1335 /* call this function to flush any scheduled tasklet */
1336 static inline void
1337 il3945_synchronize_irq(struct il_priv *il)
1338 {
1339         /* wait to make sure we flush pending tasklet */
1340         synchronize_irq(il->pci_dev->irq);
1341         tasklet_kill(&il->irq_tasklet);
1342 }
1343
1344 static const char *
1345 il3945_desc_lookup(int i)
1346 {
1347         switch (i) {
1348         case 1:
1349                 return "FAIL";
1350         case 2:
1351                 return "BAD_PARAM";
1352         case 3:
1353                 return "BAD_CHECKSUM";
1354         case 4:
1355                 return "NMI_INTERRUPT";
1356         case 5:
1357                 return "SYSASSERT";
1358         case 6:
1359                 return "FATAL_ERROR";
1360         }
1361
1362         return "UNKNOWN";
1363 }
1364
1365 #define ERROR_START_OFFSET  (1 * sizeof(u32))
1366 #define ERROR_ELEM_SIZE     (7 * sizeof(u32))
1367
1368 void
1369 il3945_dump_nic_error_log(struct il_priv *il)
1370 {
1371         u32 i;
1372         u32 desc, time, count, base, data1;
1373         u32 blink1, blink2, ilink1, ilink2;
1374
1375         base = le32_to_cpu(il->card_alive.error_event_table_ptr);
1376
1377         if (!il3945_hw_valid_rtc_data_addr(base)) {
1378                 IL_ERR("Not valid error log pointer 0x%08X\n", base);
1379                 return;
1380         }
1381
1382         count = il_read_targ_mem(il, base);
1383
1384         if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1385                 IL_ERR("Start IWL Error Log Dump:\n");
1386                 IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
1387         }
1388
1389         IL_ERR("Desc       Time       asrtPC  blink2 "
1390                "ilink1  nmiPC   Line\n");
1391         for (i = ERROR_START_OFFSET;
1392              i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
1393              i += ERROR_ELEM_SIZE) {
1394                 desc = il_read_targ_mem(il, base + i);
1395                 time = il_read_targ_mem(il, base + i + 1 * sizeof(u32));
1396                 blink1 = il_read_targ_mem(il, base + i + 2 * sizeof(u32));
1397                 blink2 = il_read_targ_mem(il, base + i + 3 * sizeof(u32));
1398                 ilink1 = il_read_targ_mem(il, base + i + 4 * sizeof(u32));
1399                 ilink2 = il_read_targ_mem(il, base + i + 5 * sizeof(u32));
1400                 data1 = il_read_targ_mem(il, base + i + 6 * sizeof(u32));
1401
1402                 IL_ERR("%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
1403                        il3945_desc_lookup(desc), desc, time, blink1, blink2,
1404                        ilink1, ilink2, data1);
1405         }
1406 }
1407
1408 static void
1409 il3945_irq_tasklet(struct il_priv *il)
1410 {
1411         u32 inta, handled = 0;
1412         u32 inta_fh;
1413         unsigned long flags;
1414 #ifdef CONFIG_IWLEGACY_DEBUG
1415         u32 inta_mask;
1416 #endif
1417
1418         spin_lock_irqsave(&il->lock, flags);
1419
1420         /* Ack/clear/reset pending uCode interrupts.
1421          * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1422          *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
1423         inta = _il_rd(il, CSR_INT);
1424         _il_wr(il, CSR_INT, inta);
1425
1426         /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1427          * Any new interrupts that happen after this, either while we're
1428          * in this tasklet, or later, will show up in next ISR/tasklet. */
1429         inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
1430         _il_wr(il, CSR_FH_INT_STATUS, inta_fh);
1431
1432 #ifdef CONFIG_IWLEGACY_DEBUG
1433         if (il_get_debug_level(il) & IL_DL_ISR) {
1434                 /* just for debug */
1435                 inta_mask = _il_rd(il, CSR_INT_MASK);
1436                 D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta,
1437                       inta_mask, inta_fh);
1438         }
1439 #endif
1440
1441         spin_unlock_irqrestore(&il->lock, flags);
1442
1443         /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1444          * atomic, make sure that inta covers all the interrupts that
1445          * we've discovered, even if FH interrupt came in just after
1446          * reading CSR_INT. */
1447         if (inta_fh & CSR39_FH_INT_RX_MASK)
1448                 inta |= CSR_INT_BIT_FH_RX;
1449         if (inta_fh & CSR39_FH_INT_TX_MASK)
1450                 inta |= CSR_INT_BIT_FH_TX;
1451
1452         /* Now service all interrupt bits discovered above. */
1453         if (inta & CSR_INT_BIT_HW_ERR) {
1454                 IL_ERR("Hardware error detected.  Restarting.\n");
1455
1456                 /* Tell the device to stop sending interrupts */
1457                 il_disable_interrupts(il);
1458
1459                 il->isr_stats.hw++;
1460                 il_irq_handle_error(il);
1461
1462                 handled |= CSR_INT_BIT_HW_ERR;
1463
1464                 return;
1465         }
1466 #ifdef CONFIG_IWLEGACY_DEBUG
1467         if (il_get_debug_level(il) & (IL_DL_ISR)) {
1468                 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1469                 if (inta & CSR_INT_BIT_SCD) {
1470                         D_ISR("Scheduler finished to transmit "
1471                               "the frame/frames.\n");
1472                         il->isr_stats.sch++;
1473                 }
1474
1475                 /* Alive notification via Rx interrupt will do the real work */
1476                 if (inta & CSR_INT_BIT_ALIVE) {
1477                         D_ISR("Alive interrupt\n");
1478                         il->isr_stats.alive++;
1479                 }
1480         }
1481 #endif
1482         /* Safely ignore these bits for debug checks below */
1483         inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1484
1485         /* Error detected by uCode */
1486         if (inta & CSR_INT_BIT_SW_ERR) {
1487                 IL_ERR("Microcode SW error detected. " "Restarting 0x%X.\n",
1488                        inta);
1489                 il->isr_stats.sw++;
1490                 il_irq_handle_error(il);
1491                 handled |= CSR_INT_BIT_SW_ERR;
1492         }
1493
1494         /* uCode wakes up after power-down sleep */
1495         if (inta & CSR_INT_BIT_WAKEUP) {
1496                 D_ISR("Wakeup interrupt\n");
1497                 il_rx_queue_update_write_ptr(il, &il->rxq);
1498                 il_txq_update_write_ptr(il, &il->txq[0]);
1499                 il_txq_update_write_ptr(il, &il->txq[1]);
1500                 il_txq_update_write_ptr(il, &il->txq[2]);
1501                 il_txq_update_write_ptr(il, &il->txq[3]);
1502                 il_txq_update_write_ptr(il, &il->txq[4]);
1503                 il_txq_update_write_ptr(il, &il->txq[5]);
1504
1505                 il->isr_stats.wakeup++;
1506                 handled |= CSR_INT_BIT_WAKEUP;
1507         }
1508
1509         /* All uCode command responses, including Tx command responses,
1510          * Rx "responses" (frame-received notification), and other
1511          * notifications from uCode come through here*/
1512         if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1513                 il3945_rx_handle(il);
1514                 il->isr_stats.rx++;
1515                 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1516         }
1517
1518         if (inta & CSR_INT_BIT_FH_TX) {
1519                 D_ISR("Tx interrupt\n");
1520                 il->isr_stats.tx++;
1521
1522                 _il_wr(il, CSR_FH_INT_STATUS, (1 << 6));
1523                 il_wr(il, FH39_TCSR_CREDIT(FH39_SRVC_CHNL), 0x0);
1524                 handled |= CSR_INT_BIT_FH_TX;
1525         }
1526
1527         if (inta & ~handled) {
1528                 IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
1529                 il->isr_stats.unhandled++;
1530         }
1531
1532         if (inta & ~il->inta_mask) {
1533                 IL_WARN("Disabled INTA bits 0x%08x were pending\n",
1534                         inta & ~il->inta_mask);
1535                 IL_WARN("   with inta_fh = 0x%08x\n", inta_fh);
1536         }
1537
1538         /* Re-enable all interrupts */
1539         /* only Re-enable if disabled by irq */
1540         if (test_bit(S_INT_ENABLED, &il->status))
1541                 il_enable_interrupts(il);
1542
1543 #ifdef CONFIG_IWLEGACY_DEBUG
1544         if (il_get_debug_level(il) & (IL_DL_ISR)) {
1545                 inta = _il_rd(il, CSR_INT);
1546                 inta_mask = _il_rd(il, CSR_INT_MASK);
1547                 inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
1548                 D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1549                       "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
1550         }
1551 #endif
1552 }
1553
1554 static int
1555 il3945_get_channels_for_scan(struct il_priv *il, enum ieee80211_band band,
1556                              u8 is_active, u8 n_probes,
1557                              struct il3945_scan_channel *scan_ch,
1558                              struct ieee80211_vif *vif)
1559 {
1560         struct ieee80211_channel *chan;
1561         const struct ieee80211_supported_band *sband;
1562         const struct il_channel_info *ch_info;
1563         u16 passive_dwell = 0;
1564         u16 active_dwell = 0;
1565         int added, i;
1566
1567         sband = il_get_hw_mode(il, band);
1568         if (!sband)
1569                 return 0;
1570
1571         active_dwell = il_get_active_dwell_time(il, band, n_probes);
1572         passive_dwell = il_get_passive_dwell_time(il, band, vif);
1573
1574         if (passive_dwell <= active_dwell)
1575                 passive_dwell = active_dwell + 1;
1576
1577         for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
1578                 chan = il->scan_request->channels[i];
1579
1580                 if (chan->band != band)
1581                         continue;
1582
1583                 scan_ch->channel = chan->hw_value;
1584
1585                 ch_info = il_get_channel_info(il, band, scan_ch->channel);
1586                 if (!il_is_channel_valid(ch_info)) {
1587                         D_SCAN("Channel %d is INVALID for this band.\n",
1588                                scan_ch->channel);
1589                         continue;
1590                 }
1591
1592                 scan_ch->active_dwell = cpu_to_le16(active_dwell);
1593                 scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
1594                 /* If passive , set up for auto-switch
1595                  *  and use long active_dwell time.
1596                  */
1597                 if (!is_active || il_is_channel_passive(ch_info) ||
1598                     (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
1599                         scan_ch->type = 0;      /* passive */
1600                         if (IL_UCODE_API(il->ucode_ver) == 1)
1601                                 scan_ch->active_dwell =
1602                                     cpu_to_le16(passive_dwell - 1);
1603                 } else {
1604                         scan_ch->type = 1;      /* active */
1605                 }
1606
1607                 /* Set direct probe bits. These may be used both for active
1608                  * scan channels (probes gets sent right away),
1609                  * or for passive channels (probes get se sent only after
1610                  * hearing clear Rx packet).*/
1611                 if (IL_UCODE_API(il->ucode_ver) >= 2) {
1612                         if (n_probes)
1613                                 scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
1614                 } else {
1615                         /* uCode v1 does not allow setting direct probe bits on
1616                          * passive channel. */
1617                         if ((scan_ch->type & 1) && n_probes)
1618                                 scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
1619                 }
1620
1621                 /* Set txpower levels to defaults */
1622                 scan_ch->tpc.dsp_atten = 110;
1623                 /* scan_pwr_info->tpc.dsp_atten; */
1624
1625                 /*scan_pwr_info->tpc.tx_gain; */
1626                 if (band == IEEE80211_BAND_5GHZ)
1627                         scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
1628                 else {
1629                         scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
1630                         /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1631                          * power level:
1632                          * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
1633                          */
1634                 }
1635
1636                 D_SCAN("Scanning %d [%s %d]\n", scan_ch->channel,
1637                        (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
1638                        (scan_ch->type & 1) ? active_dwell : passive_dwell);
1639
1640                 scan_ch++;
1641                 added++;
1642         }
1643
1644         D_SCAN("total channels to scan %d\n", added);
1645         return added;
1646 }
1647
1648 static void
1649 il3945_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates)
1650 {
1651         int i;
1652
1653         for (i = 0; i < RATE_COUNT_LEGACY; i++) {
1654                 rates[i].bitrate = il3945_rates[i].ieee * 5;
1655                 rates[i].hw_value = i;  /* Rate scaling will work on idxes */
1656                 rates[i].hw_value_short = i;
1657                 rates[i].flags = 0;
1658                 if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) {
1659                         /*
1660                          * If CCK != 1M then set short preamble rate flag.
1661                          */
1662                         rates[i].flags |=
1663                             (il3945_rates[i].plcp ==
1664                              10) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE;
1665                 }
1666         }
1667 }
1668
1669 /******************************************************************************
1670  *
1671  * uCode download functions
1672  *
1673  ******************************************************************************/
1674
1675 static void
1676 il3945_dealloc_ucode_pci(struct il_priv *il)
1677 {
1678         il_free_fw_desc(il->pci_dev, &il->ucode_code);
1679         il_free_fw_desc(il->pci_dev, &il->ucode_data);
1680         il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
1681         il_free_fw_desc(il->pci_dev, &il->ucode_init);
1682         il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
1683         il_free_fw_desc(il->pci_dev, &il->ucode_boot);
1684 }
1685
1686 /**
1687  * il3945_verify_inst_full - verify runtime uCode image in card vs. host,
1688  *     looking at all data.
1689  */
1690 static int
1691 il3945_verify_inst_full(struct il_priv *il, __le32 * image, u32 len)
1692 {
1693         u32 val;
1694         u32 save_len = len;
1695         int rc = 0;
1696         u32 errcnt;
1697
1698         D_INFO("ucode inst image size is %u\n", len);
1699
1700         il_wr(il, HBUS_TARG_MEM_RADDR, IL39_RTC_INST_LOWER_BOUND);
1701
1702         errcnt = 0;
1703         for (; len > 0; len -= sizeof(u32), image++) {
1704                 /* read data comes through single port, auto-incr addr */
1705                 /* NOTE: Use the debugless read so we don't flood kernel log
1706                  * if IL_DL_IO is set */
1707                 val = _il_rd(il, HBUS_TARG_MEM_RDAT);
1708                 if (val != le32_to_cpu(*image)) {
1709                         IL_ERR("uCode INST section is invalid at "
1710                                "offset 0x%x, is 0x%x, s/b 0x%x\n",
1711                                save_len - len, val, le32_to_cpu(*image));
1712                         rc = -EIO;
1713                         errcnt++;
1714                         if (errcnt >= 20)
1715                                 break;
1716                 }
1717         }
1718
1719         if (!errcnt)
1720                 D_INFO("ucode image in INSTRUCTION memory is good\n");
1721
1722         return rc;
1723 }
1724
1725 /**
1726  * il3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
1727  *   using sample data 100 bytes apart.  If these sample points are good,
1728  *   it's a pretty good bet that everything between them is good, too.
1729  */
1730 static int
1731 il3945_verify_inst_sparse(struct il_priv *il, __le32 * image, u32 len)
1732 {
1733         u32 val;
1734         int rc = 0;
1735         u32 errcnt = 0;
1736         u32 i;
1737
1738         D_INFO("ucode inst image size is %u\n", len);
1739
1740         for (i = 0; i < len; i += 100, image += 100 / sizeof(u32)) {
1741                 /* read data comes through single port, auto-incr addr */
1742                 /* NOTE: Use the debugless read so we don't flood kernel log
1743                  * if IL_DL_IO is set */
1744                 il_wr(il, HBUS_TARG_MEM_RADDR, i + IL39_RTC_INST_LOWER_BOUND);
1745                 val = _il_rd(il, HBUS_TARG_MEM_RDAT);
1746                 if (val != le32_to_cpu(*image)) {
1747 #if 0                           /* Enable this if you want to see details */
1748                         IL_ERR("uCode INST section is invalid at "
1749                                "offset 0x%x, is 0x%x, s/b 0x%x\n", i, val,
1750                                *image);
1751 #endif
1752                         rc = -EIO;
1753                         errcnt++;
1754                         if (errcnt >= 3)
1755                                 break;
1756                 }
1757         }
1758
1759         return rc;
1760 }
1761
1762 /**
1763  * il3945_verify_ucode - determine which instruction image is in SRAM,
1764  *    and verify its contents
1765  */
1766 static int
1767 il3945_verify_ucode(struct il_priv *il)
1768 {
1769         __le32 *image;
1770         u32 len;
1771         int rc = 0;
1772
1773         /* Try bootstrap */
1774         image = (__le32 *) il->ucode_boot.v_addr;
1775         len = il->ucode_boot.len;
1776         rc = il3945_verify_inst_sparse(il, image, len);
1777         if (rc == 0) {
1778                 D_INFO("Bootstrap uCode is good in inst SRAM\n");
1779                 return 0;
1780         }
1781
1782         /* Try initialize */
1783         image = (__le32 *) il->ucode_init.v_addr;
1784         len = il->ucode_init.len;
1785         rc = il3945_verify_inst_sparse(il, image, len);
1786         if (rc == 0) {
1787                 D_INFO("Initialize uCode is good in inst SRAM\n");
1788                 return 0;
1789         }
1790
1791         /* Try runtime/protocol */
1792         image = (__le32 *) il->ucode_code.v_addr;
1793         len = il->ucode_code.len;
1794         rc = il3945_verify_inst_sparse(il, image, len);
1795         if (rc == 0) {
1796                 D_INFO("Runtime uCode is good in inst SRAM\n");
1797                 return 0;
1798         }
1799
1800         IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
1801
1802         /* Since nothing seems to match, show first several data entries in
1803          * instruction SRAM, so maybe visual inspection will give a clue.
1804          * Selection of bootstrap image (vs. other images) is arbitrary. */
1805         image = (__le32 *) il->ucode_boot.v_addr;
1806         len = il->ucode_boot.len;
1807         rc = il3945_verify_inst_full(il, image, len);
1808
1809         return rc;
1810 }
1811
1812 static void
1813 il3945_nic_start(struct il_priv *il)
1814 {
1815         /* Remove all resets to allow NIC to operate */
1816         _il_wr(il, CSR_RESET, 0);
1817 }
1818
1819 #define IL3945_UCODE_GET(item)                                          \
1820 static u32 il3945_ucode_get_##item(const struct il_ucode_header *ucode)\
1821 {                                                                       \
1822         return le32_to_cpu(ucode->v1.item);                             \
1823 }
1824
1825 static u32
1826 il3945_ucode_get_header_size(u32 api_ver)
1827 {
1828         return 24;
1829 }
1830
1831 static u8 *
1832 il3945_ucode_get_data(const struct il_ucode_header *ucode)
1833 {
1834         return (u8 *) ucode->v1.data;
1835 }
1836
1837 IL3945_UCODE_GET(inst_size);
1838 IL3945_UCODE_GET(data_size);
1839 IL3945_UCODE_GET(init_size);
1840 IL3945_UCODE_GET(init_data_size);
1841 IL3945_UCODE_GET(boot_size);
1842
1843 /**
1844  * il3945_read_ucode - Read uCode images from disk file.
1845  *
1846  * Copy into buffers for card to fetch via bus-mastering
1847  */
1848 static int
1849 il3945_read_ucode(struct il_priv *il)
1850 {
1851         const struct il_ucode_header *ucode;
1852         int ret = -EINVAL, idx;
1853         const struct firmware *ucode_raw;
1854         /* firmware file name contains uCode/driver compatibility version */
1855         const char *name_pre = il->cfg->fw_name_pre;
1856         const unsigned int api_max = il->cfg->ucode_api_max;
1857         const unsigned int api_min = il->cfg->ucode_api_min;
1858         char buf[25];
1859         u8 *src;
1860         size_t len;
1861         u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
1862
1863         /* Ask kernel firmware_class module to get the boot firmware off disk.
1864          * request_firmware() is synchronous, file is in memory on return. */
1865         for (idx = api_max; idx >= api_min; idx--) {
1866                 sprintf(buf, "%s%u%s", name_pre, idx, ".ucode");
1867                 ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev);
1868                 if (ret < 0) {
1869                         IL_ERR("%s firmware file req failed: %d\n", buf, ret);
1870                         if (ret == -ENOENT)
1871                                 continue;
1872                         else
1873                                 goto error;
1874                 } else {
1875                         if (idx < api_max)
1876                                 IL_ERR("Loaded firmware %s, "
1877                                        "which is deprecated. "
1878                                        " Please use API v%u instead.\n", buf,
1879                                        api_max);
1880                         D_INFO("Got firmware '%s' file "
1881                                "(%zd bytes) from disk\n", buf, ucode_raw->size);
1882                         break;
1883                 }
1884         }
1885
1886         if (ret < 0)
1887                 goto error;
1888
1889         /* Make sure that we got at least our header! */
1890         if (ucode_raw->size < il3945_ucode_get_header_size(1)) {
1891                 IL_ERR("File size way too small!\n");
1892                 ret = -EINVAL;
1893                 goto err_release;
1894         }
1895
1896         /* Data from ucode file:  header followed by uCode images */
1897         ucode = (struct il_ucode_header *)ucode_raw->data;
1898
1899         il->ucode_ver = le32_to_cpu(ucode->ver);
1900         api_ver = IL_UCODE_API(il->ucode_ver);
1901         inst_size = il3945_ucode_get_inst_size(ucode);
1902         data_size = il3945_ucode_get_data_size(ucode);
1903         init_size = il3945_ucode_get_init_size(ucode);
1904         init_data_size = il3945_ucode_get_init_data_size(ucode);
1905         boot_size = il3945_ucode_get_boot_size(ucode);
1906         src = il3945_ucode_get_data(ucode);
1907
1908         /* api_ver should match the api version forming part of the
1909          * firmware filename ... but we don't check for that and only rely
1910          * on the API version read from firmware header from here on forward */
1911
1912         if (api_ver < api_min || api_ver > api_max) {
1913                 IL_ERR("Driver unable to support your firmware API. "
1914                        "Driver supports v%u, firmware is v%u.\n", api_max,
1915                        api_ver);
1916                 il->ucode_ver = 0;
1917                 ret = -EINVAL;
1918                 goto err_release;
1919         }
1920         if (api_ver != api_max)
1921                 IL_ERR("Firmware has old API version. Expected %u, "
1922                        "got %u. New firmware can be obtained "
1923                        "from http://www.intellinuxwireless.org.\n", api_max,
1924                        api_ver);
1925
1926         IL_INFO("loaded firmware version %u.%u.%u.%u\n",
1927                 IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver),
1928                 IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver));
1929
1930         snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version),
1931                  "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver),
1932                  IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver),
1933                  IL_UCODE_SERIAL(il->ucode_ver));
1934
1935         D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
1936         D_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
1937         D_INFO("f/w package hdr runtime data size = %u\n", data_size);
1938         D_INFO("f/w package hdr init inst size = %u\n", init_size);
1939         D_INFO("f/w package hdr init data size = %u\n", init_data_size);
1940         D_INFO("f/w package hdr boot inst size = %u\n", boot_size);
1941
1942         /* Verify size of file vs. image size info in file's header */
1943         if (ucode_raw->size !=
1944             il3945_ucode_get_header_size(api_ver) + inst_size + data_size +
1945             init_size + init_data_size + boot_size) {
1946
1947                 D_INFO("uCode file size %zd does not match expected size\n",
1948                        ucode_raw->size);
1949                 ret = -EINVAL;
1950                 goto err_release;
1951         }
1952
1953         /* Verify that uCode images will fit in card's SRAM */
1954         if (inst_size > IL39_MAX_INST_SIZE) {
1955                 D_INFO("uCode instr len %d too large to fit in\n", inst_size);
1956                 ret = -EINVAL;
1957                 goto err_release;
1958         }
1959
1960         if (data_size > IL39_MAX_DATA_SIZE) {
1961                 D_INFO("uCode data len %d too large to fit in\n", data_size);
1962                 ret = -EINVAL;
1963                 goto err_release;
1964         }
1965         if (init_size > IL39_MAX_INST_SIZE) {
1966                 D_INFO("uCode init instr len %d too large to fit in\n",
1967                        init_size);
1968                 ret = -EINVAL;
1969                 goto err_release;
1970         }
1971         if (init_data_size > IL39_MAX_DATA_SIZE) {
1972                 D_INFO("uCode init data len %d too large to fit in\n",
1973                        init_data_size);
1974                 ret = -EINVAL;
1975                 goto err_release;
1976         }
1977         if (boot_size > IL39_MAX_BSM_SIZE) {
1978                 D_INFO("uCode boot instr len %d too large to fit in\n",
1979                        boot_size);
1980                 ret = -EINVAL;
1981                 goto err_release;
1982         }
1983
1984         /* Allocate ucode buffers for card's bus-master loading ... */
1985
1986         /* Runtime instructions and 2 copies of data:
1987          * 1) unmodified from disk
1988          * 2) backup cache for save/restore during power-downs */
1989         il->ucode_code.len = inst_size;
1990         il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
1991
1992         il->ucode_data.len = data_size;
1993         il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
1994
1995         il->ucode_data_backup.len = data_size;
1996         il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
1997
1998         if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
1999             !il->ucode_data_backup.v_addr)
2000                 goto err_pci_alloc;
2001
2002         /* Initialization instructions and data */
2003         if (init_size && init_data_size) {
2004                 il->ucode_init.len = init_size;
2005                 il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
2006
2007                 il->ucode_init_data.len = init_data_size;
2008                 il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
2009
2010                 if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
2011                         goto err_pci_alloc;
2012         }
2013
2014         /* Bootstrap (instructions only, no data) */
2015         if (boot_size) {
2016                 il->ucode_boot.len = boot_size;
2017                 il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
2018
2019                 if (!il->ucode_boot.v_addr)
2020                         goto err_pci_alloc;
2021         }
2022
2023         /* Copy images into buffers for card's bus-master reads ... */
2024
2025         /* Runtime instructions (first block of data in file) */
2026         len = inst_size;
2027         D_INFO("Copying (but not loading) uCode instr len %zd\n", len);
2028         memcpy(il->ucode_code.v_addr, src, len);
2029         src += len;
2030
2031         D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
2032                il->ucode_code.v_addr, (u32) il->ucode_code.p_addr);
2033
2034         /* Runtime data (2nd block)
2035          * NOTE:  Copy into backup buffer will be done in il3945_up()  */
2036         len = data_size;
2037         D_INFO("Copying (but not loading) uCode data len %zd\n", len);
2038         memcpy(il->ucode_data.v_addr, src, len);
2039         memcpy(il->ucode_data_backup.v_addr, src, len);
2040         src += len;
2041
2042         /* Initialization instructions (3rd block) */
2043         if (init_size) {
2044                 len = init_size;
2045                 D_INFO("Copying (but not loading) init instr len %zd\n", len);
2046                 memcpy(il->ucode_init.v_addr, src, len);
2047                 src += len;
2048         }
2049
2050         /* Initialization data (4th block) */
2051         if (init_data_size) {
2052                 len = init_data_size;
2053                 D_INFO("Copying (but not loading) init data len %zd\n", len);
2054                 memcpy(il->ucode_init_data.v_addr, src, len);
2055                 src += len;
2056         }
2057
2058         /* Bootstrap instructions (5th block) */
2059         len = boot_size;
2060         D_INFO("Copying (but not loading) boot instr len %zd\n", len);
2061         memcpy(il->ucode_boot.v_addr, src, len);
2062
2063         /* We have our copies now, allow OS release its copies */
2064         release_firmware(ucode_raw);
2065         return 0;
2066
2067 err_pci_alloc:
2068         IL_ERR("failed to allocate pci memory\n");
2069         ret = -ENOMEM;
2070         il3945_dealloc_ucode_pci(il);
2071
2072 err_release:
2073         release_firmware(ucode_raw);
2074
2075 error:
2076         return ret;
2077 }
2078
2079 /**
2080  * il3945_set_ucode_ptrs - Set uCode address location
2081  *
2082  * Tell initialization uCode where to find runtime uCode.
2083  *
2084  * BSM registers initially contain pointers to initialization uCode.
2085  * We need to replace them to load runtime uCode inst and data,
2086  * and to save runtime data when powering down.
2087  */
2088 static int
2089 il3945_set_ucode_ptrs(struct il_priv *il)
2090 {
2091         dma_addr_t pinst;
2092         dma_addr_t pdata;
2093
2094         /* bits 31:0 for 3945 */
2095         pinst = il->ucode_code.p_addr;
2096         pdata = il->ucode_data_backup.p_addr;
2097
2098         /* Tell bootstrap uCode where to find image to load */
2099         il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
2100         il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
2101         il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, il->ucode_data.len);
2102
2103         /* Inst byte count must be last to set up, bit 31 signals uCode
2104          *   that all new ptr/size info is in place */
2105         il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
2106                    il->ucode_code.len | BSM_DRAM_INST_LOAD);
2107
2108         D_INFO("Runtime uCode pointers are set.\n");
2109
2110         return 0;
2111 }
2112
2113 /**
2114  * il3945_init_alive_start - Called after N_ALIVE notification received
2115  *
2116  * Called after N_ALIVE notification received from "initialize" uCode.
2117  *
2118  * Tell "initialize" uCode to go ahead and load the runtime uCode.
2119  */
2120 static void
2121 il3945_init_alive_start(struct il_priv *il)
2122 {
2123         /* Check alive response for "valid" sign from uCode */
2124         if (il->card_alive_init.is_valid != UCODE_VALID_OK) {
2125                 /* We had an error bringing up the hardware, so take it
2126                  * all the way back down so we can try again */
2127                 D_INFO("Initialize Alive failed.\n");
2128                 goto restart;
2129         }
2130
2131         /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
2132          * This is a paranoid check, because we would not have gotten the
2133          * "initialize" alive if code weren't properly loaded.  */
2134         if (il3945_verify_ucode(il)) {
2135                 /* Runtime instruction load was bad;
2136                  * take it all the way back down so we can try again */
2137                 D_INFO("Bad \"initialize\" uCode load.\n");
2138                 goto restart;
2139         }
2140
2141         /* Send pointers to protocol/runtime uCode image ... init code will
2142          * load and launch runtime uCode, which will send us another "Alive"
2143          * notification. */
2144         D_INFO("Initialization Alive received.\n");
2145         if (il3945_set_ucode_ptrs(il)) {
2146                 /* Runtime instruction load won't happen;
2147                  * take it all the way back down so we can try again */
2148                 D_INFO("Couldn't set up uCode pointers.\n");
2149                 goto restart;
2150         }
2151         return;
2152
2153 restart:
2154         queue_work(il->workqueue, &il->restart);
2155 }
2156
2157 /**
2158  * il3945_alive_start - called after N_ALIVE notification received
2159  *                   from protocol/runtime uCode (initialization uCode's
2160  *                   Alive gets handled by il3945_init_alive_start()).
2161  */
2162 static void
2163 il3945_alive_start(struct il_priv *il)
2164 {
2165         int thermal_spin = 0;
2166         u32 rfkill;
2167
2168         D_INFO("Runtime Alive received.\n");
2169
2170         if (il->card_alive.is_valid != UCODE_VALID_OK) {
2171                 /* We had an error bringing up the hardware, so take it
2172                  * all the way back down so we can try again */
2173                 D_INFO("Alive failed.\n");
2174                 goto restart;
2175         }
2176
2177         /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2178          * This is a paranoid check, because we would not have gotten the
2179          * "runtime" alive if code weren't properly loaded.  */
2180         if (il3945_verify_ucode(il)) {
2181                 /* Runtime instruction load was bad;
2182                  * take it all the way back down so we can try again */
2183                 D_INFO("Bad runtime uCode load.\n");
2184                 goto restart;
2185         }
2186
2187         rfkill = il_rd_prph(il, APMG_RFKILL_REG);
2188         D_INFO("RFKILL status: 0x%x\n", rfkill);
2189
2190         if (rfkill & 0x1) {
2191                 clear_bit(S_RFKILL, &il->status);
2192                 /* if RFKILL is not on, then wait for thermal
2193                  * sensor in adapter to kick in */
2194                 while (il3945_hw_get_temperature(il) == 0) {
2195                         thermal_spin++;
2196                         udelay(10);
2197                 }
2198
2199                 if (thermal_spin)
2200                         D_INFO("Thermal calibration took %dus\n",
2201                                thermal_spin * 10);
2202         } else
2203                 set_bit(S_RFKILL, &il->status);
2204
2205         /* After the ALIVE response, we can send commands to 3945 uCode */
2206         set_bit(S_ALIVE, &il->status);
2207
2208         /* Enable watchdog to monitor the driver tx queues */
2209         il_setup_watchdog(il);
2210
2211         if (il_is_rfkill(il))
2212                 return;
2213
2214         ieee80211_wake_queues(il->hw);
2215
2216         il->active_rate = RATES_MASK_3945;
2217
2218         il_power_update_mode(il, true);
2219
2220         if (il_is_associated(il)) {
2221                 struct il3945_rxon_cmd *active_rxon =
2222                     (struct il3945_rxon_cmd *)(&il->active);
2223
2224                 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2225                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2226         } else {
2227                 /* Initialize our rx_config data */
2228                 il_connection_init_rx_config(il);
2229         }
2230
2231         /* Configure Bluetooth device coexistence support */
2232         il_send_bt_config(il);
2233
2234         set_bit(S_READY, &il->status);
2235
2236         /* Configure the adapter for unassociated operation */
2237         il3945_commit_rxon(il);
2238
2239         il3945_reg_txpower_periodic(il);
2240
2241         D_INFO("ALIVE processing complete.\n");
2242         wake_up(&il->wait_command_queue);
2243
2244         return;
2245
2246 restart:
2247         queue_work(il->workqueue, &il->restart);
2248 }
2249
2250 static void il3945_cancel_deferred_work(struct il_priv *il);
2251
2252 static void
2253 __il3945_down(struct il_priv *il)
2254 {
2255         unsigned long flags;
2256         int exit_pending;
2257
2258         D_INFO(DRV_NAME " is going down\n");
2259
2260         il_scan_cancel_timeout(il, 200);
2261
2262         exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);
2263
2264         /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
2265          * to prevent rearm timer */
2266         del_timer_sync(&il->watchdog);
2267
2268         /* Station information will now be cleared in device */
2269         il_clear_ucode_stations(il);
2270         il_dealloc_bcast_stations(il);
2271         il_clear_driver_stations(il);
2272
2273         /* Unblock any waiting calls */
2274         wake_up_all(&il->wait_command_queue);
2275
2276         /* Wipe out the EXIT_PENDING status bit if we are not actually
2277          * exiting the module */
2278         if (!exit_pending)
2279                 clear_bit(S_EXIT_PENDING, &il->status);
2280
2281         /* stop and reset the on-board processor */
2282         _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
2283
2284         /* tell the device to stop sending interrupts */
2285         spin_lock_irqsave(&il->lock, flags);
2286         il_disable_interrupts(il);
2287         spin_unlock_irqrestore(&il->lock, flags);
2288         il3945_synchronize_irq(il);
2289
2290         if (il->mac80211_registered)
2291                 ieee80211_stop_queues(il->hw);
2292
2293         /* If we have not previously called il3945_init() then
2294          * clear all bits but the RF Kill bits and return */
2295         if (!il_is_init(il)) {
2296                 il->status =
2297                     test_bit(S_RFKILL, &il->status) << S_RFKILL |
2298                     test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
2299                     test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
2300                 goto exit;
2301         }
2302
2303         /* ...otherwise clear out all the status bits but the RF Kill
2304          * bit and continue taking the NIC down. */
2305         il->status &=
2306             test_bit(S_RFKILL, &il->status) << S_RFKILL |
2307             test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
2308             test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
2309             test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
2310
2311         /*
2312          * We disabled and synchronized interrupt, and priv->mutex is taken, so
2313          * here is the only thread which will program device registers, but
2314          * still have lockdep assertions, so we are taking reg_lock.
2315          */
2316         spin_lock_irq(&il->reg_lock);
2317         /* FIXME: il_grab_nic_access if rfkill is off ? */
2318
2319         il3945_hw_txq_ctx_stop(il);
2320         il3945_hw_rxq_stop(il);
2321         /* Power-down device's busmaster DMA clocks */
2322         _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
2323         udelay(5);
2324         /* Stop the device, and put it in low power state */
2325         _il_apm_stop(il);
2326
2327         spin_unlock_irq(&il->reg_lock);
2328
2329         il3945_hw_txq_ctx_free(il);
2330 exit:
2331         memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
2332
2333         if (il->beacon_skb)
2334                 dev_kfree_skb(il->beacon_skb);
2335         il->beacon_skb = NULL;
2336
2337         /* clear out any free frames */
2338         il3945_clear_free_frames(il);
2339 }
2340
2341 static void
2342 il3945_down(struct il_priv *il)
2343 {
2344         mutex_lock(&il->mutex);
2345         __il3945_down(il);
2346         mutex_unlock(&il->mutex);
2347
2348         il3945_cancel_deferred_work(il);
2349 }
2350
2351 #define MAX_HW_RESTARTS 5
2352
2353 static int
2354 il3945_alloc_bcast_station(struct il_priv *il)
2355 {
2356         unsigned long flags;
2357         u8 sta_id;
2358
2359         spin_lock_irqsave(&il->sta_lock, flags);
2360         sta_id = il_prep_station(il, il_bcast_addr, false, NULL);
2361         if (sta_id == IL_INVALID_STATION) {
2362                 IL_ERR("Unable to prepare broadcast station\n");
2363                 spin_unlock_irqrestore(&il->sta_lock, flags);
2364
2365                 return -EINVAL;
2366         }
2367
2368         il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
2369         il->stations[sta_id].used |= IL_STA_BCAST;
2370         spin_unlock_irqrestore(&il->sta_lock, flags);
2371
2372         return 0;
2373 }
2374
2375 static int
2376 __il3945_up(struct il_priv *il)
2377 {
2378         int rc, i;
2379
2380         rc = il3945_alloc_bcast_station(il);
2381         if (rc)
2382                 return rc;
2383
2384         if (test_bit(S_EXIT_PENDING, &il->status)) {
2385                 IL_WARN("Exit pending; will not bring the NIC up\n");
2386                 return -EIO;
2387         }
2388
2389         if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
2390                 IL_ERR("ucode not available for device bring up\n");
2391                 return -EIO;
2392         }
2393
2394         /* If platform's RF_KILL switch is NOT set to KILL */
2395         if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
2396                 clear_bit(S_RFKILL, &il->status);
2397         else {
2398                 set_bit(S_RFKILL, &il->status);
2399                 IL_WARN("Radio disabled by HW RF Kill switch\n");
2400                 return -ENODEV;
2401         }
2402
2403         _il_wr(il, CSR_INT, 0xFFFFFFFF);
2404
2405         rc = il3945_hw_nic_init(il);
2406         if (rc) {
2407                 IL_ERR("Unable to int nic\n");
2408                 return rc;
2409         }
2410
2411         /* make sure rfkill handshake bits are cleared */
2412         _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2413         _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
2414
2415         /* clear (again), then enable host interrupts */
2416         _il_wr(il, CSR_INT, 0xFFFFFFFF);
2417         il_enable_interrupts(il);
2418
2419         /* really make sure rfkill handshake bits are cleared */
2420         _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2421         _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2422
2423         /* Copy original ucode data image from disk into backup cache.
2424          * This will be used to initialize the on-board processor's
2425          * data SRAM for a clean start when the runtime program first loads. */
2426         memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
2427                il->ucode_data.len);
2428
2429         /* We return success when we resume from suspend and rf_kill is on. */
2430         if (test_bit(S_RFKILL, &il->status))
2431                 return 0;
2432
2433         for (i = 0; i < MAX_HW_RESTARTS; i++) {
2434
2435                 /* load bootstrap state machine,
2436                  * load bootstrap program into processor's memory,
2437                  * prepare to load the "initialize" uCode */
2438                 rc = il->ops->load_ucode(il);
2439
2440                 if (rc) {
2441                         IL_ERR("Unable to set up bootstrap uCode: %d\n", rc);
2442                         continue;
2443                 }
2444
2445                 /* start card; "initialize" will load runtime ucode */
2446                 il3945_nic_start(il);
2447
2448                 D_INFO(DRV_NAME " is coming up\n");
2449
2450                 return 0;
2451         }
2452
2453         set_bit(S_EXIT_PENDING, &il->status);
2454         __il3945_down(il);
2455         clear_bit(S_EXIT_PENDING, &il->status);
2456
2457         /* tried to restart and config the device for as long as our
2458          * patience could withstand */
2459         IL_ERR("Unable to initialize device after %d attempts.\n", i);
2460         return -EIO;
2461 }
2462
2463 /*****************************************************************************
2464  *
2465  * Workqueue callbacks
2466  *
2467  *****************************************************************************/
2468
2469 static void
2470 il3945_bg_init_alive_start(struct work_struct *data)
2471 {
2472         struct il_priv *il =
2473             container_of(data, struct il_priv, init_alive_start.work);
2474
2475         mutex_lock(&il->mutex);
2476         if (test_bit(S_EXIT_PENDING, &il->status))
2477                 goto out;
2478
2479         il3945_init_alive_start(il);
2480 out:
2481         mutex_unlock(&il->mutex);
2482 }
2483
2484 static void
2485 il3945_bg_alive_start(struct work_struct *data)
2486 {
2487         struct il_priv *il =
2488             container_of(data, struct il_priv, alive_start.work);
2489
2490         mutex_lock(&il->mutex);
2491         if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL)
2492                 goto out;
2493
2494         il3945_alive_start(il);
2495 out:
2496         mutex_unlock(&il->mutex);
2497 }
2498
2499 /*
2500  * 3945 cannot interrupt driver when hardware rf kill switch toggles;
2501  * driver must poll CSR_GP_CNTRL_REG register for change.  This register
2502  * *is* readable even when device has been SW_RESET into low power mode
2503  * (e.g. during RF KILL).
2504  */
2505 static void
2506 il3945_rfkill_poll(struct work_struct *data)
2507 {
2508         struct il_priv *il =
2509             container_of(data, struct il_priv, _3945.rfkill_poll.work);
2510         bool old_rfkill = test_bit(S_RFKILL, &il->status);
2511         bool new_rfkill =
2512             !(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
2513
2514         if (new_rfkill != old_rfkill) {
2515                 if (new_rfkill)
2516                         set_bit(S_RFKILL, &il->status);
2517                 else
2518                         clear_bit(S_RFKILL, &il->status);
2519
2520                 wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);
2521
2522                 D_RF_KILL("RF_KILL bit toggled to %s.\n",
2523                           new_rfkill ? "disable radio" : "enable radio");
2524         }
2525
2526         /* Keep this running, even if radio now enabled.  This will be
2527          * cancelled in mac_start() if system decides to start again */
2528         queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
2529                            round_jiffies_relative(2 * HZ));
2530
2531 }
2532
2533 int
2534 il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
2535 {
2536         struct il_host_cmd cmd = {
2537                 .id = C_SCAN,
2538                 .len = sizeof(struct il3945_scan_cmd),
2539                 .flags = CMD_SIZE_HUGE,
2540         };
2541         struct il3945_scan_cmd *scan;
2542         u8 n_probes = 0;
2543         enum ieee80211_band band;
2544         bool is_active = false;
2545         int ret;
2546         u16 len;
2547
2548         lockdep_assert_held(&il->mutex);
2549
2550         if (!il->scan_cmd) {
2551                 il->scan_cmd =
2552                     kmalloc(sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE,
2553                             GFP_KERNEL);
2554                 if (!il->scan_cmd) {
2555                         D_SCAN("Fail to allocate scan memory\n");
2556                         return -ENOMEM;
2557                 }
2558         }
2559         scan = il->scan_cmd;
2560         memset(scan, 0, sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE);
2561
2562         scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
2563         scan->quiet_time = IL_ACTIVE_QUIET_TIME;
2564
2565         if (il_is_associated(il)) {
2566                 u16 interval;
2567                 u32 extra;
2568                 u32 suspend_time = 100;
2569                 u32 scan_suspend_time = 100;
2570
2571                 D_INFO("Scanning while associated...\n");
2572
2573                 interval = vif->bss_conf.beacon_int;
2574
2575                 scan->suspend_time = 0;
2576                 scan->max_out_time = cpu_to_le32(200 * 1024);
2577                 if (!interval)
2578                         interval = suspend_time;
2579                 /*
2580                  * suspend time format:
2581                  *  0-19: beacon interval in usec (time before exec.)
2582                  * 20-23: 0
2583                  * 24-31: number of beacons (suspend between channels)
2584                  */
2585
2586                 extra = (suspend_time / interval) << 24;
2587                 scan_suspend_time =
2588                     0xFF0FFFFF & (extra | ((suspend_time % interval) * 1024));
2589
2590                 scan->suspend_time = cpu_to_le32(scan_suspend_time);
2591                 D_SCAN("suspend_time 0x%X beacon interval %d\n",
2592                        scan_suspend_time, interval);
2593         }
2594
2595         if (il->scan_request->n_ssids) {
2596                 int i, p = 0;
2597                 D_SCAN("Kicking off active scan\n");
2598                 for (i = 0; i < il->scan_request->n_ssids; i++) {
2599                         /* always does wildcard anyway */
2600                         if (!il->scan_request->ssids[i].ssid_len)
2601                                 continue;
2602                         scan->direct_scan[p].id = WLAN_EID_SSID;
2603                         scan->direct_scan[p].len =
2604                             il->scan_request->ssids[i].ssid_len;
2605                         memcpy(scan->direct_scan[p].ssid,
2606                                il->scan_request->ssids[i].ssid,
2607                                il->scan_request->ssids[i].ssid_len);
2608                         n_probes++;
2609                         p++;
2610                 }
2611                 is_active = true;
2612         } else
2613                 D_SCAN("Kicking off passive scan.\n");
2614
2615         /* We don't build a direct scan probe request; the uCode will do
2616          * that based on the direct_mask added to each channel entry */
2617         scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
2618         scan->tx_cmd.sta_id = il->hw_params.bcast_id;
2619         scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2620
2621         /* flags + rate selection */
2622
2623         switch (il->scan_band) {
2624         case IEEE80211_BAND_2GHZ:
2625                 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
2626                 scan->tx_cmd.rate = RATE_1M_PLCP;
2627                 band = IEEE80211_BAND_2GHZ;
2628                 break;
2629         case IEEE80211_BAND_5GHZ:
2630                 scan->tx_cmd.rate = RATE_6M_PLCP;
2631                 band = IEEE80211_BAND_5GHZ;
2632                 break;
2633         default:
2634                 IL_WARN("Invalid scan band\n");
2635                 return -EIO;
2636         }
2637
2638         /*
2639          * If active scaning is requested but a certain channel is marked
2640          * passive, we can do active scanning if we detect transmissions. For
2641          * passive only scanning disable switching to active on any channel.
2642          */
2643         scan->good_CRC_th =
2644             is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER;
2645
2646         len =
2647             il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
2648                               vif->addr, il->scan_request->ie,
2649                               il->scan_request->ie_len,
2650                               IL_MAX_SCAN_SIZE - sizeof(*scan));
2651         scan->tx_cmd.len = cpu_to_le16(len);
2652
2653         /* select Rx antennas */
2654         scan->flags |= il3945_get_antenna_flags(il);
2655
2656         scan->channel_count =
2657             il3945_get_channels_for_scan(il, band, is_active, n_probes,
2658                                          (void *)&scan->data[len], vif);
2659         if (scan->channel_count == 0) {
2660                 D_SCAN("channel count %d\n", scan->channel_count);
2661                 return -EIO;
2662         }
2663
2664         cmd.len +=
2665             le16_to_cpu(scan->tx_cmd.len) +
2666             scan->channel_count * sizeof(struct il3945_scan_channel);
2667         cmd.data = scan;
2668         scan->len = cpu_to_le16(cmd.len);
2669
2670         set_bit(S_SCAN_HW, &il->status);
2671         ret = il_send_cmd_sync(il, &cmd);
2672         if (ret)
2673                 clear_bit(S_SCAN_HW, &il->status);
2674         return ret;
2675 }
2676
2677 void
2678 il3945_post_scan(struct il_priv *il)
2679 {
2680         /*
2681          * Since setting the RXON may have been deferred while
2682          * performing the scan, fire one off if needed
2683          */
2684         if (memcmp(&il->staging, &il->active, sizeof(il->staging)))
2685                 il3945_commit_rxon(il);
2686 }
2687
2688 static void
2689 il3945_bg_restart(struct work_struct *data)
2690 {
2691         struct il_priv *il = container_of(data, struct il_priv, restart);
2692
2693         if (test_bit(S_EXIT_PENDING, &il->status))
2694                 return;
2695
2696         if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
2697                 mutex_lock(&il->mutex);
2698                 il->is_open = 0;
2699                 mutex_unlock(&il->mutex);
2700                 il3945_down(il);
2701                 ieee80211_restart_hw(il->hw);
2702         } else {
2703                 il3945_down(il);
2704
2705                 mutex_lock(&il->mutex);
2706                 if (test_bit(S_EXIT_PENDING, &il->status)) {
2707                         mutex_unlock(&il->mutex);
2708                         return;
2709                 }
2710
2711                 __il3945_up(il);
2712                 mutex_unlock(&il->mutex);
2713         }
2714 }
2715
2716 static void
2717 il3945_bg_rx_replenish(struct work_struct *data)
2718 {
2719         struct il_priv *il = container_of(data, struct il_priv, rx_replenish);
2720
2721         mutex_lock(&il->mutex);
2722         if (test_bit(S_EXIT_PENDING, &il->status))
2723                 goto out;
2724
2725         il3945_rx_replenish(il);
2726 out:
2727         mutex_unlock(&il->mutex);
2728 }
2729
2730 void
2731 il3945_post_associate(struct il_priv *il)
2732 {
2733         int rc = 0;
2734         struct ieee80211_conf *conf = NULL;
2735
2736         if (!il->vif || !il->is_open)
2737                 return;
2738
2739         D_ASSOC("Associated as %d to: %pM\n", il->vif->bss_conf.aid,
2740                 il->active.bssid_addr);
2741
2742         if (test_bit(S_EXIT_PENDING, &il->status))
2743                 return;
2744
2745         il_scan_cancel_timeout(il, 200);
2746
2747         conf = &il->hw->conf;
2748
2749         il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2750         il3945_commit_rxon(il);
2751
2752         rc = il_send_rxon_timing(il);
2753         if (rc)
2754                 IL_WARN("C_RXON_TIMING failed - " "Attempting to continue.\n");
2755
2756         il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2757
2758         il->staging.assoc_id = cpu_to_le16(il->vif->bss_conf.aid);
2759
2760         D_ASSOC("assoc id %d beacon interval %d\n", il->vif->bss_conf.aid,
2761                 il->vif->bss_conf.beacon_int);
2762
2763         if (il->vif->bss_conf.use_short_preamble)
2764                 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2765         else
2766                 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2767
2768         if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
2769                 if (il->vif->bss_conf.use_short_slot)
2770                         il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
2771                 else
2772                         il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2773         }
2774
2775         il3945_commit_rxon(il);
2776
2777         switch (il->vif->type) {
2778         case NL80211_IFTYPE_STATION:
2779                 il3945_rate_scale_init(il->hw, IL_AP_ID);
2780                 break;
2781         case NL80211_IFTYPE_ADHOC:
2782                 il3945_send_beacon_cmd(il);
2783                 break;
2784         default:
2785                 IL_ERR("%s Should not be called in %d mode\n", __func__,
2786                       il->vif->type);
2787                 break;
2788         }
2789 }
2790
2791 /*****************************************************************************
2792  *
2793  * mac80211 entry point functions
2794  *
2795  *****************************************************************************/
2796
2797 #define UCODE_READY_TIMEOUT     (2 * HZ)
2798
2799 static int
2800 il3945_mac_start(struct ieee80211_hw *hw)
2801 {
2802         struct il_priv *il = hw->priv;
2803         int ret;
2804
2805         /* we should be verifying the device is ready to be opened */
2806         mutex_lock(&il->mutex);
2807         D_MAC80211("enter\n");
2808
2809         /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
2810          * ucode filename and max sizes are card-specific. */
2811
2812         if (!il->ucode_code.len) {
2813                 ret = il3945_read_ucode(il);
2814                 if (ret) {
2815                         IL_ERR("Could not read microcode: %d\n", ret);
2816                         mutex_unlock(&il->mutex);
2817                         goto out_release_irq;
2818                 }
2819         }
2820
2821         ret = __il3945_up(il);
2822
2823         mutex_unlock(&il->mutex);
2824
2825         if (ret)
2826                 goto out_release_irq;
2827
2828         D_INFO("Start UP work.\n");
2829
2830         /* Wait for START_ALIVE from ucode. Otherwise callbacks from
2831          * mac80211 will not be run successfully. */
2832         ret = wait_event_timeout(il->wait_command_queue,
2833                                  test_bit(S_READY, &il->status),
2834                                  UCODE_READY_TIMEOUT);
2835         if (!ret) {
2836                 if (!test_bit(S_READY, &il->status)) {
2837                         IL_ERR("Wait for START_ALIVE timeout after %dms.\n",
2838                                jiffies_to_msecs(UCODE_READY_TIMEOUT));
2839                         ret = -ETIMEDOUT;
2840                         goto out_release_irq;
2841                 }
2842         }
2843
2844         /* ucode is running and will send rfkill notifications,
2845          * no need to poll the killswitch state anymore */
2846         cancel_delayed_work(&il->_3945.rfkill_poll);
2847
2848         il->is_open = 1;
2849         D_MAC80211("leave\n");
2850         return 0;
2851
2852 out_release_irq:
2853         il->is_open = 0;
2854         D_MAC80211("leave - failed\n");
2855         return ret;
2856 }
2857
2858 static void
2859 il3945_mac_stop(struct ieee80211_hw *hw)
2860 {
2861         struct il_priv *il = hw->priv;
2862
2863         D_MAC80211("enter\n");
2864
2865         if (!il->is_open) {
2866                 D_MAC80211("leave - skip\n");
2867                 return;
2868         }
2869
2870         il->is_open = 0;
2871
2872         il3945_down(il);
2873
2874         flush_workqueue(il->workqueue);
2875
2876         /* start polling the killswitch state again */
2877         queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
2878                            round_jiffies_relative(2 * HZ));
2879
2880         D_MAC80211("leave\n");
2881 }
2882
2883 static void
2884 il3945_mac_tx(struct ieee80211_hw *hw,
2885                struct ieee80211_tx_control *control,
2886                struct sk_buff *skb)
2887 {
2888         struct il_priv *il = hw->priv;
2889
2890         D_MAC80211("enter\n");
2891
2892         D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2893              ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2894
2895         if (il3945_tx_skb(il, control->sta, skb))
2896                 dev_kfree_skb_any(skb);
2897
2898         D_MAC80211("leave\n");
2899 }
2900
2901 void
2902 il3945_config_ap(struct il_priv *il)
2903 {
2904         struct ieee80211_vif *vif = il->vif;
2905         int rc = 0;
2906
2907         if (test_bit(S_EXIT_PENDING, &il->status))
2908                 return;
2909
2910         /* The following should be done only at AP bring up */
2911         if (!(il_is_associated(il))) {
2912
2913                 /* RXON - unassoc (to set timing command) */
2914                 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2915                 il3945_commit_rxon(il);
2916
2917                 /* RXON Timing */
2918                 rc = il_send_rxon_timing(il);
2919                 if (rc)
2920                         IL_WARN("C_RXON_TIMING failed - "
2921                                 "Attempting to continue.\n");
2922
2923                 il->staging.assoc_id = 0;
2924
2925                 if (vif->bss_conf.use_short_preamble)
2926                         il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2927                 else
2928                         il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2929
2930                 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
2931                         if (vif->bss_conf.use_short_slot)
2932                                 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
2933                         else
2934                                 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2935                 }
2936                 /* restore RXON assoc */
2937                 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2938                 il3945_commit_rxon(il);
2939         }
2940         il3945_send_beacon_cmd(il);
2941 }
2942
2943 static int
2944 il3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2945                    struct ieee80211_vif *vif, struct ieee80211_sta *sta,
2946                    struct ieee80211_key_conf *key)
2947 {
2948         struct il_priv *il = hw->priv;
2949         int ret = 0;
2950         u8 sta_id = IL_INVALID_STATION;
2951         u8 static_key;
2952
2953         D_MAC80211("enter\n");
2954
2955         if (il3945_mod_params.sw_crypto) {
2956                 D_MAC80211("leave - hwcrypto disabled\n");
2957                 return -EOPNOTSUPP;
2958         }
2959
2960         /*
2961          * To support IBSS RSN, don't program group keys in IBSS, the
2962          * hardware will then not attempt to decrypt the frames.
2963          */
2964         if (vif->type == NL80211_IFTYPE_ADHOC &&
2965             !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
2966                 D_MAC80211("leave - IBSS RSN\n");
2967                 return -EOPNOTSUPP;
2968         }
2969
2970         static_key = !il_is_associated(il);
2971
2972         if (!static_key) {
2973                 sta_id = il_sta_id_or_broadcast(il, sta);
2974                 if (sta_id == IL_INVALID_STATION) {
2975                         D_MAC80211("leave - station not found\n");
2976                         return -EINVAL;
2977                 }
2978         }
2979
2980         mutex_lock(&il->mutex);
2981         il_scan_cancel_timeout(il, 100);
2982
2983         switch (cmd) {
2984         case SET_KEY:
2985                 if (static_key)
2986                         ret = il3945_set_static_key(il, key);
2987                 else
2988                         ret = il3945_set_dynamic_key(il, key, sta_id);
2989                 D_MAC80211("enable hwcrypto key\n");
2990                 break;
2991         case DISABLE_KEY:
2992                 if (static_key)
2993                         ret = il3945_remove_static_key(il);
2994                 else
2995                         ret = il3945_clear_sta_key_info(il, sta_id);
2996                 D_MAC80211("disable hwcrypto key\n");
2997                 break;
2998         default:
2999                 ret = -EINVAL;
3000         }
3001
3002         D_MAC80211("leave ret %d\n", ret);
3003         mutex_unlock(&il->mutex);
3004
3005         return ret;
3006 }
3007
3008 static int
3009 il3945_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
3010                    struct ieee80211_sta *sta)
3011 {
3012         struct il_priv *il = hw->priv;
3013         struct il3945_sta_priv *sta_priv = (void *)sta->drv_priv;
3014         int ret;
3015         bool is_ap = vif->type == NL80211_IFTYPE_STATION;
3016         u8 sta_id;
3017
3018         mutex_lock(&il->mutex);
3019         D_INFO("station %pM\n", sta->addr);
3020         sta_priv->common.sta_id = IL_INVALID_STATION;
3021
3022         ret = il_add_station_common(il, sta->addr, is_ap, sta, &sta_id);
3023         if (ret) {
3024                 IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
3025                 /* Should we return success if return code is EEXIST ? */
3026                 mutex_unlock(&il->mutex);
3027                 return ret;
3028         }
3029
3030         sta_priv->common.sta_id = sta_id;
3031
3032         /* Initialize rate scaling */
3033         D_INFO("Initializing rate scaling for station %pM\n", sta->addr);
3034         il3945_rs_rate_init(il, sta, sta_id);
3035         mutex_unlock(&il->mutex);
3036
3037         return 0;
3038 }
3039
3040 static void
3041 il3945_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
3042                         unsigned int *total_flags, u64 multicast)
3043 {
3044         struct il_priv *il = hw->priv;
3045         __le32 filter_or = 0, filter_nand = 0;
3046
3047 #define CHK(test, flag) do { \
3048         if (*total_flags & (test))              \
3049                 filter_or |= (flag);            \
3050         else                                    \
3051                 filter_nand |= (flag);          \
3052         } while (0)
3053
3054         D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags,
3055                    *total_flags);
3056
3057         CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
3058         CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
3059         CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
3060
3061 #undef CHK
3062
3063         mutex_lock(&il->mutex);
3064
3065         il->staging.filter_flags &= ~filter_nand;
3066         il->staging.filter_flags |= filter_or;
3067
3068         /*
3069          * Not committing directly because hardware can perform a scan,
3070          * but even if hw is ready, committing here breaks for some reason,
3071          * we'll eventually commit the filter flags change anyway.
3072          */
3073
3074         mutex_unlock(&il->mutex);
3075
3076         /*
3077          * Receiving all multicast frames is always enabled by the
3078          * default flags setup in il_connection_init_rx_config()
3079          * since we currently do not support programming multicast
3080          * filters into the device.
3081          */
3082         *total_flags &=
3083             FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
3084             FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
3085 }
3086
3087 /*****************************************************************************
3088  *
3089  * sysfs attributes
3090  *
3091  *****************************************************************************/
3092
3093 #ifdef CONFIG_IWLEGACY_DEBUG
3094
3095 /*
3096  * The following adds a new attribute to the sysfs representation
3097  * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
3098  * used for controlling the debug level.
3099  *
3100  * See the level definitions in iwl for details.
3101  *
3102  * The debug_level being managed using sysfs below is a per device debug
3103  * level that is used instead of the global debug level if it (the per
3104  * device debug level) is set.
3105  */
3106 static ssize_t
3107 il3945_show_debug_level(struct device *d, struct device_attribute *attr,
3108                         char *buf)
3109 {
3110         struct il_priv *il = dev_get_drvdata(d);
3111         return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
3112 }
3113
3114 static ssize_t
3115 il3945_store_debug_level(struct device *d, struct device_attribute *attr,
3116                          const char *buf, size_t count)
3117 {
3118         struct il_priv *il = dev_get_drvdata(d);
3119         unsigned long val;
3120         int ret;
3121
3122         ret = kstrtoul(buf, 0, &val);
3123         if (ret)
3124                 IL_INFO("%s is not in hex or decimal form.\n", buf);
3125         else
3126                 il->debug_level = val;
3127
3128         return strnlen(buf, count);
3129 }
3130
3131 static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, il3945_show_debug_level,
3132                    il3945_store_debug_level);
3133
3134 #endif /* CONFIG_IWLEGACY_DEBUG */
3135
3136 static ssize_t
3137 il3945_show_temperature(struct device *d, struct device_attribute *attr,
3138                         char *buf)
3139 {
3140         struct il_priv *il = dev_get_drvdata(d);
3141
3142         if (!il_is_alive(il))
3143                 return -EAGAIN;
3144
3145         return sprintf(buf, "%d\n", il3945_hw_get_temperature(il));
3146 }
3147
3148 static DEVICE_ATTR(temperature, S_IRUGO, il3945_show_temperature, NULL);
3149
3150 static ssize_t
3151 il3945_show_tx_power(struct device *d, struct device_attribute *attr, char *buf)
3152 {
3153         struct il_priv *il = dev_get_drvdata(d);
3154         return sprintf(buf, "%d\n", il->tx_power_user_lmt);
3155 }
3156
3157 static ssize_t
3158 il3945_store_tx_power(struct device *d, struct device_attribute *attr,
3159                       const char *buf, size_t count)
3160 {
3161         struct il_priv *il = dev_get_drvdata(d);
3162         char *p = (char *)buf;
3163         u32 val;
3164
3165         val = simple_strtoul(p, &p, 10);
3166         if (p == buf)
3167                 IL_INFO(": %s is not in decimal form.\n", buf);
3168         else
3169                 il3945_hw_reg_set_txpower(il, val);
3170
3171         return count;
3172 }
3173
3174 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, il3945_show_tx_power,
3175                    il3945_store_tx_power);
3176
3177 static ssize_t
3178 il3945_show_flags(struct device *d, struct device_attribute *attr, char *buf)
3179 {
3180         struct il_priv *il = dev_get_drvdata(d);
3181
3182         return sprintf(buf, "0x%04X\n", il->active.flags);
3183 }
3184
3185 static ssize_t
3186 il3945_store_flags(struct device *d, struct device_attribute *attr,
3187                    const char *buf, size_t count)
3188 {
3189         struct il_priv *il = dev_get_drvdata(d);
3190         u32 flags = simple_strtoul(buf, NULL, 0);
3191
3192         mutex_lock(&il->mutex);
3193         if (le32_to_cpu(il->staging.flags) != flags) {
3194                 /* Cancel any currently running scans... */
3195                 if (il_scan_cancel_timeout(il, 100))
3196                         IL_WARN("Could not cancel scan.\n");
3197                 else {
3198                         D_INFO("Committing rxon.flags = 0x%04X\n", flags);
3199                         il->staging.flags = cpu_to_le32(flags);
3200                         il3945_commit_rxon(il);
3201                 }
3202         }
3203         mutex_unlock(&il->mutex);
3204
3205         return count;
3206 }
3207
3208 static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, il3945_show_flags,
3209                    il3945_store_flags);
3210
3211 static ssize_t
3212 il3945_show_filter_flags(struct device *d, struct device_attribute *attr,
3213                          char *buf)
3214 {
3215         struct il_priv *il = dev_get_drvdata(d);
3216
3217         return sprintf(buf, "0x%04X\n", le32_to_cpu(il->active.filter_flags));
3218 }
3219
3220 static ssize_t
3221 il3945_store_filter_flags(struct device *d, struct device_attribute *attr,
3222                           const char *buf, size_t count)
3223 {
3224         struct il_priv *il = dev_get_drvdata(d);
3225         u32 filter_flags = simple_strtoul(buf, NULL, 0);
3226
3227         mutex_lock(&il->mutex);
3228         if (le32_to_cpu(il->staging.filter_flags) != filter_flags) {
3229                 /* Cancel any currently running scans... */
3230                 if (il_scan_cancel_timeout(il, 100))
3231                         IL_WARN("Could not cancel scan.\n");
3232                 else {
3233                         D_INFO("Committing rxon.filter_flags = " "0x%04X\n",
3234                                filter_flags);
3235                         il->staging.filter_flags = cpu_to_le32(filter_flags);
3236                         il3945_commit_rxon(il);
3237                 }
3238         }
3239         mutex_unlock(&il->mutex);
3240
3241         return count;
3242 }
3243
3244 static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, il3945_show_filter_flags,
3245                    il3945_store_filter_flags);
3246
3247 static ssize_t
3248 il3945_show_measurement(struct device *d, struct device_attribute *attr,
3249                         char *buf)
3250 {
3251         struct il_priv *il = dev_get_drvdata(d);
3252         struct il_spectrum_notification measure_report;
3253         u32 size = sizeof(measure_report), len = 0, ofs = 0;
3254         u8 *data = (u8 *) &measure_report;
3255         unsigned long flags;
3256
3257         spin_lock_irqsave(&il->lock, flags);
3258         if (!(il->measurement_status & MEASUREMENT_READY)) {
3259                 spin_unlock_irqrestore(&il->lock, flags);
3260                 return 0;
3261         }
3262         memcpy(&measure_report, &il->measure_report, size);
3263         il->measurement_status = 0;
3264         spin_unlock_irqrestore(&il->lock, flags);
3265
3266         while (size && PAGE_SIZE - len) {
3267                 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
3268                                    PAGE_SIZE - len, 1);
3269                 len = strlen(buf);
3270                 if (PAGE_SIZE - len)
3271                         buf[len++] = '\n';
3272
3273                 ofs += 16;
3274                 size -= min(size, 16U);
3275         }
3276
3277         return len;
3278 }
3279
3280 static ssize_t
3281 il3945_store_measurement(struct device *d, struct device_attribute *attr,
3282                          const char *buf, size_t count)
3283 {
3284         struct il_priv *il = dev_get_drvdata(d);
3285         struct ieee80211_measurement_params params = {
3286                 .channel = le16_to_cpu(il->active.channel),
3287                 .start_time = cpu_to_le64(il->_3945.last_tsf),
3288                 .duration = cpu_to_le16(1),
3289         };
3290         u8 type = IL_MEASURE_BASIC;
3291         u8 buffer[32];
3292         u8 channel;
3293
3294         if (count) {
3295                 char *p = buffer;
3296                 strlcpy(buffer, buf, sizeof(buffer));
3297                 channel = simple_strtoul(p, NULL, 0);
3298                 if (channel)
3299                         params.channel = channel;
3300
3301                 p = buffer;
3302                 while (*p && *p != ' ')
3303                         p++;
3304                 if (*p)
3305                         type = simple_strtoul(p + 1, NULL, 0);
3306         }
3307
3308         D_INFO("Invoking measurement of type %d on " "channel %d (for '%s')\n",
3309                type, params.channel, buf);
3310         il3945_get_measurement(il, &params, type);
3311
3312         return count;
3313 }
3314
3315 static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, il3945_show_measurement,
3316                    il3945_store_measurement);
3317
3318 static ssize_t
3319 il3945_store_retry_rate(struct device *d, struct device_attribute *attr,
3320                         const char *buf, size_t count)
3321 {
3322         struct il_priv *il = dev_get_drvdata(d);
3323
3324         il->retry_rate = simple_strtoul(buf, NULL, 0);
3325         if (il->retry_rate <= 0)
3326                 il->retry_rate = 1;
3327
3328         return count;
3329 }
3330
3331 static ssize_t
3332 il3945_show_retry_rate(struct device *d, struct device_attribute *attr,
3333                        char *buf)
3334 {
3335         struct il_priv *il = dev_get_drvdata(d);
3336         return sprintf(buf, "%d", il->retry_rate);
3337 }
3338
3339 static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, il3945_show_retry_rate,
3340                    il3945_store_retry_rate);
3341
3342 static ssize_t
3343 il3945_show_channels(struct device *d, struct device_attribute *attr, char *buf)
3344 {
3345         /* all this shit doesn't belong into sysfs anyway */
3346         return 0;
3347 }
3348
3349 static DEVICE_ATTR(channels, S_IRUSR, il3945_show_channels, NULL);
3350
3351 static ssize_t
3352 il3945_show_antenna(struct device *d, struct device_attribute *attr, char *buf)
3353 {
3354         struct il_priv *il = dev_get_drvdata(d);
3355
3356         if (!il_is_alive(il))
3357                 return -EAGAIN;
3358
3359         return sprintf(buf, "%d\n", il3945_mod_params.antenna);
3360 }
3361
3362 static ssize_t
3363 il3945_store_antenna(struct device *d, struct device_attribute *attr,
3364                      const char *buf, size_t count)
3365 {
3366         struct il_priv *il __maybe_unused = dev_get_drvdata(d);
3367         int ant;
3368
3369         if (count == 0)
3370                 return 0;
3371
3372         if (sscanf(buf, "%1i", &ant) != 1) {
3373                 D_INFO("not in hex or decimal form.\n");
3374                 return count;
3375         }
3376
3377         if (ant >= 0 && ant <= 2) {
3378                 D_INFO("Setting antenna select to %d.\n", ant);
3379                 il3945_mod_params.antenna = (enum il3945_antenna)ant;
3380         } else
3381                 D_INFO("Bad antenna select value %d.\n", ant);
3382
3383         return count;
3384 }
3385
3386 static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, il3945_show_antenna,
3387                    il3945_store_antenna);
3388
3389 static ssize_t
3390 il3945_show_status(struct device *d, struct device_attribute *attr, char *buf)
3391 {
3392         struct il_priv *il = dev_get_drvdata(d);
3393         if (!il_is_alive(il))
3394                 return -EAGAIN;
3395         return sprintf(buf, "0x%08x\n", (int)il->status);
3396 }
3397
3398 static DEVICE_ATTR(status, S_IRUGO, il3945_show_status, NULL);
3399
3400 static ssize_t
3401 il3945_dump_error_log(struct device *d, struct device_attribute *attr,
3402                       const char *buf, size_t count)
3403 {
3404         struct il_priv *il = dev_get_drvdata(d);
3405         char *p = (char *)buf;
3406
3407         if (p[0] == '1')
3408                 il3945_dump_nic_error_log(il);
3409
3410         return strnlen(buf, count);
3411 }
3412
3413 static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, il3945_dump_error_log);
3414
3415 /*****************************************************************************
3416  *
3417  * driver setup and tear down
3418  *
3419  *****************************************************************************/
3420
3421 static void
3422 il3945_setup_deferred_work(struct il_priv *il)
3423 {
3424         il->workqueue = create_singlethread_workqueue(DRV_NAME);
3425
3426         init_waitqueue_head(&il->wait_command_queue);
3427
3428         INIT_WORK(&il->restart, il3945_bg_restart);
3429         INIT_WORK(&il->rx_replenish, il3945_bg_rx_replenish);
3430         INIT_DELAYED_WORK(&il->init_alive_start, il3945_bg_init_alive_start);
3431         INIT_DELAYED_WORK(&il->alive_start, il3945_bg_alive_start);
3432         INIT_DELAYED_WORK(&il->_3945.rfkill_poll, il3945_rfkill_poll);
3433
3434         il_setup_scan_deferred_work(il);
3435
3436         il3945_hw_setup_deferred_work(il);
3437
3438         init_timer(&il->watchdog);
3439         il->watchdog.data = (unsigned long)il;
3440         il->watchdog.function = il_bg_watchdog;
3441
3442         tasklet_init(&il->irq_tasklet,
3443                      (void (*)(unsigned long))il3945_irq_tasklet,
3444                      (unsigned long)il);
3445 }
3446
3447 static void
3448 il3945_cancel_deferred_work(struct il_priv *il)
3449 {
3450         il3945_hw_cancel_deferred_work(il);
3451
3452         cancel_delayed_work_sync(&il->init_alive_start);
3453         cancel_delayed_work(&il->alive_start);
3454
3455         il_cancel_scan_deferred_work(il);
3456 }
3457
3458 static struct attribute *il3945_sysfs_entries[] = {
3459         &dev_attr_antenna.attr,
3460         &dev_attr_channels.attr,
3461         &dev_attr_dump_errors.attr,
3462         &dev_attr_flags.attr,
3463         &dev_attr_filter_flags.attr,
3464         &dev_attr_measurement.attr,
3465         &dev_attr_retry_rate.attr,
3466         &dev_attr_status.attr,
3467         &dev_attr_temperature.attr,
3468         &dev_attr_tx_power.attr,
3469 #ifdef CONFIG_IWLEGACY_DEBUG
3470         &dev_attr_debug_level.attr,
3471 #endif
3472         NULL
3473 };
3474
3475 static struct attribute_group il3945_attribute_group = {
3476         .name = NULL,           /* put in device directory */
3477         .attrs = il3945_sysfs_entries,
3478 };
3479
3480 static struct ieee80211_ops il3945_mac_ops __read_mostly = {
3481         .tx = il3945_mac_tx,
3482         .start = il3945_mac_start,
3483         .stop = il3945_mac_stop,
3484         .add_interface = il_mac_add_interface,
3485         .remove_interface = il_mac_remove_interface,
3486         .change_interface = il_mac_change_interface,
3487         .config = il_mac_config,
3488         .configure_filter = il3945_configure_filter,
3489         .set_key = il3945_mac_set_key,
3490         .conf_tx = il_mac_conf_tx,
3491         .reset_tsf = il_mac_reset_tsf,
3492         .bss_info_changed = il_mac_bss_info_changed,
3493         .hw_scan = il_mac_hw_scan,
3494         .sta_add = il3945_mac_sta_add,
3495         .sta_remove = il_mac_sta_remove,
3496         .tx_last_beacon = il_mac_tx_last_beacon,
3497         .flush = il_mac_flush,
3498 };
3499
3500 static int
3501 il3945_init_drv(struct il_priv *il)
3502 {
3503         int ret;
3504         struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
3505
3506         il->retry_rate = 1;
3507         il->beacon_skb = NULL;
3508
3509         spin_lock_init(&il->sta_lock);
3510         spin_lock_init(&il->hcmd_lock);
3511
3512         INIT_LIST_HEAD(&il->free_frames);
3513
3514         mutex_init(&il->mutex);
3515
3516         il->ieee_channels = NULL;
3517         il->ieee_rates = NULL;
3518         il->band = IEEE80211_BAND_2GHZ;
3519
3520         il->iw_mode = NL80211_IFTYPE_STATION;
3521         il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
3522
3523         /* initialize force reset */
3524         il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
3525
3526         if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
3527                 IL_WARN("Unsupported EEPROM version: 0x%04X\n",
3528                         eeprom->version);
3529                 ret = -EINVAL;
3530                 goto err;
3531         }
3532         ret = il_init_channel_map(il);
3533         if (ret) {
3534                 IL_ERR("initializing regulatory failed: %d\n", ret);
3535                 goto err;
3536         }
3537
3538         /* Set up txpower settings in driver for all channels */
3539         if (il3945_txpower_set_from_eeprom(il)) {
3540                 ret = -EIO;
3541                 goto err_free_channel_map;
3542         }
3543
3544         ret = il_init_geos(il);
3545         if (ret) {
3546                 IL_ERR("initializing geos failed: %d\n", ret);
3547                 goto err_free_channel_map;
3548         }
3549         il3945_init_hw_rates(il, il->ieee_rates);
3550
3551         return 0;
3552
3553 err_free_channel_map:
3554         il_free_channel_map(il);
3555 err:
3556         return ret;
3557 }
3558
3559 #define IL3945_MAX_PROBE_REQUEST        200
3560
3561 static int
3562 il3945_setup_mac(struct il_priv *il)
3563 {
3564         int ret;
3565         struct ieee80211_hw *hw = il->hw;
3566
3567         hw->rate_control_algorithm = "iwl-3945-rs";
3568         hw->sta_data_size = sizeof(struct il3945_sta_priv);
3569         hw->vif_data_size = sizeof(struct il_vif_priv);
3570
3571         /* Tell mac80211 our characteristics */
3572         hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SPECTRUM_MGMT |
3573                     IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
3574
3575         hw->wiphy->interface_modes =
3576             BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
3577
3578         hw->wiphy->flags |=
3579             WIPHY_FLAG_CUSTOM_REGULATORY | WIPHY_FLAG_DISABLE_BEACON_HINTS |
3580             WIPHY_FLAG_IBSS_RSN;
3581
3582         hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
3583
3584         hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
3585         /* we create the 802.11 header and a zero-length SSID element */
3586         hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2;
3587
3588         /* Default value; 4 EDCA QOS priorities */
3589         hw->queues = 4;
3590
3591         if (il->bands[IEEE80211_BAND_2GHZ].n_channels)
3592                 il->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
3593                     &il->bands[IEEE80211_BAND_2GHZ];
3594
3595         if (il->bands[IEEE80211_BAND_5GHZ].n_channels)
3596                 il->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
3597                     &il->bands[IEEE80211_BAND_5GHZ];
3598
3599         il_leds_init(il);
3600
3601         ret = ieee80211_register_hw(il->hw);
3602         if (ret) {
3603                 IL_ERR("Failed to register hw (error %d)\n", ret);
3604                 return ret;
3605         }
3606         il->mac80211_registered = 1;
3607
3608         return 0;
3609 }
3610
3611 static int
3612 il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3613 {
3614         int err = 0;
3615         struct il_priv *il;
3616         struct ieee80211_hw *hw;
3617         struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
3618         struct il3945_eeprom *eeprom;
3619         unsigned long flags;
3620
3621         /***********************
3622          * 1. Allocating HW data
3623          * ********************/
3624
3625         hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il3945_mac_ops);
3626         if (!hw) {
3627                 err = -ENOMEM;
3628                 goto out;
3629         }
3630         il = hw->priv;
3631         il->hw = hw;
3632         SET_IEEE80211_DEV(hw, &pdev->dev);
3633
3634         il->cmd_queue = IL39_CMD_QUEUE_NUM;
3635
3636         /*
3637          * Disabling hardware scan means that mac80211 will perform scans
3638          * "the hard way", rather than using device's scan.
3639          */
3640         if (il3945_mod_params.disable_hw_scan) {
3641                 D_INFO("Disabling hw_scan\n");
3642                 il3945_mac_ops.hw_scan = NULL;
3643         }
3644
3645         D_INFO("*** LOAD DRIVER ***\n");
3646         il->cfg = cfg;
3647         il->ops = &il3945_ops;
3648 #ifdef CONFIG_IWLEGACY_DEBUGFS
3649         il->debugfs_ops = &il3945_debugfs_ops;
3650 #endif
3651         il->pci_dev = pdev;
3652         il->inta_mask = CSR_INI_SET_MASK;
3653
3654         /***************************
3655          * 2. Initializing PCI bus
3656          * *************************/
3657         pci_disable_link_state(pdev,
3658                                PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
3659                                PCIE_LINK_STATE_CLKPM);
3660
3661         if (pci_enable_device(pdev)) {
3662                 err = -ENODEV;
3663                 goto out_ieee80211_free_hw;
3664         }
3665
3666         pci_set_master(pdev);
3667
3668         err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3669         if (!err)
3670                 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
3671         if (err) {
3672                 IL_WARN("No suitable DMA available.\n");
3673                 goto out_pci_disable_device;
3674         }
3675
3676         pci_set_drvdata(pdev, il);
3677         err = pci_request_regions(pdev, DRV_NAME);
3678         if (err)
3679                 goto out_pci_disable_device;
3680
3681         /***********************
3682          * 3. Read REV Register
3683          * ********************/
3684         il->hw_base = pci_ioremap_bar(pdev, 0);
3685         if (!il->hw_base) {
3686                 err = -ENODEV;
3687                 goto out_pci_release_regions;
3688         }
3689
3690         D_INFO("pci_resource_len = 0x%08llx\n",
3691                (unsigned long long)pci_resource_len(pdev, 0));
3692         D_INFO("pci_resource_base = %p\n", il->hw_base);
3693
3694         /* We disable the RETRY_TIMEOUT register (0x41) to keep
3695          * PCI Tx retries from interfering with C3 CPU state */
3696         pci_write_config_byte(pdev, 0x41, 0x00);
3697
3698         /* these spin locks will be used in apm_init and EEPROM access
3699          * we should init now
3700          */
3701         spin_lock_init(&il->reg_lock);
3702         spin_lock_init(&il->lock);
3703
3704         /*
3705          * stop and reset the on-board processor just in case it is in a
3706          * strange state ... like being left stranded by a primary kernel
3707          * and this is now the kdump kernel trying to start up
3708          */
3709         _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3710
3711         /***********************
3712          * 4. Read EEPROM
3713          * ********************/
3714
3715         /* Read the EEPROM */
3716         err = il_eeprom_init(il);
3717         if (err) {
3718                 IL_ERR("Unable to init EEPROM\n");
3719                 goto out_iounmap;
3720         }
3721         /* MAC Address location in EEPROM same for 3945/4965 */
3722         eeprom = (struct il3945_eeprom *)il->eeprom;
3723         D_INFO("MAC address: %pM\n", eeprom->mac_address);
3724         SET_IEEE80211_PERM_ADDR(il->hw, eeprom->mac_address);
3725
3726         /***********************
3727          * 5. Setup HW Constants
3728          * ********************/
3729         /* Device-specific setup */
3730         err = il3945_hw_set_hw_params(il);
3731         if (err) {
3732                 IL_ERR("failed to set hw settings\n");
3733                 goto out_eeprom_free;
3734         }
3735
3736         /***********************
3737          * 6. Setup il
3738          * ********************/
3739
3740         err = il3945_init_drv(il);
3741         if (err) {
3742                 IL_ERR("initializing driver failed\n");
3743                 goto out_unset_hw_params;
3744         }
3745
3746         IL_INFO("Detected Intel Wireless WiFi Link %s\n", il->cfg->name);
3747
3748         /***********************
3749          * 7. Setup Services
3750          * ********************/
3751
3752         spin_lock_irqsave(&il->lock, flags);
3753         il_disable_interrupts(il);
3754         spin_unlock_irqrestore(&il->lock, flags);
3755
3756         pci_enable_msi(il->pci_dev);
3757
3758         err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il);
3759         if (err) {
3760                 IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
3761                 goto out_disable_msi;
3762         }
3763
3764         err = sysfs_create_group(&pdev->dev.kobj, &il3945_attribute_group);
3765         if (err) {
3766                 IL_ERR("failed to create sysfs device attributes\n");
3767                 goto out_release_irq;
3768         }
3769
3770         il_set_rxon_channel(il, &il->bands[IEEE80211_BAND_2GHZ].channels[5]);
3771         il3945_setup_deferred_work(il);
3772         il3945_setup_handlers(il);
3773         il_power_initialize(il);
3774
3775         /*********************************
3776          * 8. Setup and Register mac80211
3777          * *******************************/
3778
3779         il_enable_interrupts(il);
3780
3781         err = il3945_setup_mac(il);
3782         if (err)
3783                 goto out_remove_sysfs;
3784
3785         err = il_dbgfs_register(il, DRV_NAME);
3786         if (err)
3787                 IL_ERR("failed to create debugfs files. Ignoring error: %d\n",
3788                        err);
3789
3790         /* Start monitoring the killswitch */
3791         queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2 * HZ);
3792
3793         return 0;
3794
3795 out_remove_sysfs:
3796         destroy_workqueue(il->workqueue);
3797         il->workqueue = NULL;
3798         sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
3799 out_release_irq:
3800         free_irq(il->pci_dev->irq, il);
3801 out_disable_msi:
3802         pci_disable_msi(il->pci_dev);
3803         il_free_geos(il);
3804         il_free_channel_map(il);
3805 out_unset_hw_params:
3806         il3945_unset_hw_params(il);
3807 out_eeprom_free:
3808         il_eeprom_free(il);
3809 out_iounmap:
3810         iounmap(il->hw_base);
3811 out_pci_release_regions:
3812         pci_release_regions(pdev);
3813 out_pci_disable_device:
3814         pci_set_drvdata(pdev, NULL);
3815         pci_disable_device(pdev);
3816 out_ieee80211_free_hw:
3817         ieee80211_free_hw(il->hw);
3818 out:
3819         return err;
3820 }
3821
3822 static void
3823 il3945_pci_remove(struct pci_dev *pdev)
3824 {
3825         struct il_priv *il = pci_get_drvdata(pdev);
3826         unsigned long flags;
3827
3828         if (!il)
3829                 return;
3830
3831         D_INFO("*** UNLOAD DRIVER ***\n");
3832
3833         il_dbgfs_unregister(il);
3834
3835         set_bit(S_EXIT_PENDING, &il->status);
3836
3837         il_leds_exit(il);
3838
3839         if (il->mac80211_registered) {
3840                 ieee80211_unregister_hw(il->hw);
3841                 il->mac80211_registered = 0;
3842         } else {
3843                 il3945_down(il);
3844         }
3845
3846         /*
3847          * Make sure device is reset to low power before unloading driver.
3848          * This may be redundant with il_down(), but there are paths to
3849          * run il_down() without calling apm_ops.stop(), and there are
3850          * paths to avoid running il_down() at all before leaving driver.
3851          * This (inexpensive) call *makes sure* device is reset.
3852          */
3853         il_apm_stop(il);
3854
3855         /* make sure we flush any pending irq or
3856          * tasklet for the driver
3857          */
3858         spin_lock_irqsave(&il->lock, flags);
3859         il_disable_interrupts(il);
3860         spin_unlock_irqrestore(&il->lock, flags);
3861
3862         il3945_synchronize_irq(il);
3863
3864         sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
3865
3866         cancel_delayed_work_sync(&il->_3945.rfkill_poll);
3867
3868         il3945_dealloc_ucode_pci(il);
3869
3870         if (il->rxq.bd)
3871                 il3945_rx_queue_free(il, &il->rxq);
3872         il3945_hw_txq_ctx_free(il);
3873
3874         il3945_unset_hw_params(il);
3875
3876         /*netif_stop_queue(dev); */
3877         flush_workqueue(il->workqueue);
3878
3879         /* ieee80211_unregister_hw calls il3945_mac_stop, which flushes
3880          * il->workqueue... so we can't take down the workqueue
3881          * until now... */
3882         destroy_workqueue(il->workqueue);
3883         il->workqueue = NULL;
3884
3885         free_irq(pdev->irq, il);
3886         pci_disable_msi(pdev);
3887
3888         iounmap(il->hw_base);
3889         pci_release_regions(pdev);
3890         pci_disable_device(pdev);
3891         pci_set_drvdata(pdev, NULL);
3892
3893         il_free_channel_map(il);
3894         il_free_geos(il);
3895         kfree(il->scan_cmd);
3896         if (il->beacon_skb)
3897                 dev_kfree_skb(il->beacon_skb);
3898
3899         ieee80211_free_hw(il->hw);
3900 }
3901
3902 /*****************************************************************************
3903  *
3904  * driver and module entry point
3905  *
3906  *****************************************************************************/
3907
3908 static struct pci_driver il3945_driver = {
3909         .name = DRV_NAME,
3910         .id_table = il3945_hw_card_ids,
3911         .probe = il3945_pci_probe,
3912         .remove = il3945_pci_remove,
3913         .driver.pm = IL_LEGACY_PM_OPS,
3914 };
3915
3916 static int __init
3917 il3945_init(void)
3918 {
3919
3920         int ret;
3921         pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
3922         pr_info(DRV_COPYRIGHT "\n");
3923
3924         ret = il3945_rate_control_register();
3925         if (ret) {
3926                 pr_err("Unable to register rate control algorithm: %d\n", ret);
3927                 return ret;
3928         }
3929
3930         ret = pci_register_driver(&il3945_driver);
3931         if (ret) {
3932                 pr_err("Unable to initialize PCI module\n");
3933                 goto error_register;
3934         }
3935
3936         return ret;
3937
3938 error_register:
3939         il3945_rate_control_unregister();
3940         return ret;
3941 }
3942
3943 static void __exit
3944 il3945_exit(void)
3945 {
3946         pci_unregister_driver(&il3945_driver);
3947         il3945_rate_control_unregister();
3948 }
3949
3950 MODULE_FIRMWARE(IL3945_MODULE_FIRMWARE(IL3945_UCODE_API_MAX));
3951
3952 module_param_named(antenna, il3945_mod_params.antenna, int, S_IRUGO);
3953 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
3954 module_param_named(swcrypto, il3945_mod_params.sw_crypto, int, S_IRUGO);
3955 MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])");
3956 module_param_named(disable_hw_scan, il3945_mod_params.disable_hw_scan, int,
3957                    S_IRUGO);
3958 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)");
3959 #ifdef CONFIG_IWLEGACY_DEBUG
3960 module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR);
3961 MODULE_PARM_DESC(debug, "debug output mask");
3962 #endif
3963 module_param_named(fw_restart, il3945_mod_params.restart_fw, int, S_IRUGO);
3964 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
3965
3966 module_exit(il3945_exit);
3967 module_init(il3945_init);