drivers/net/wireless/libertas/if_spi.c

   1 /*
   2  *      linux/drivers/net/wireless/libertas/if_spi.c
   3  *
   4  *      Driver for Marvell SPI WLAN cards.
   5  *
   6  *      Copyright 2008 Analog Devices Inc.
   7  *
   8  *      Authors:
   9  *      Andrey Yurovsky <andrey@cozybit.com>
  10  *      Colin McCabe <colin@cozybit.com>
  11  *
  12  *      Inspired by if_sdio.c, Copyright 2007-2008 Pierre Ossman
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License as published by
  16  * the Free Software Foundation; either version 2 of the License, or
  17  * (at your option) any later version.
  18  */
  19
  20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  21
  22 #include <linux/hardirq.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/module.h>
  25 #include <linux/firmware.h>
  26 #include <linux/jiffies.h>
  27 #include <linux/list.h>
  28 #include <linux/netdevice.h>
  29 #include <linux/slab.h>
  30 #include <linux/spi/libertas_spi.h>
  31 #include <linux/spi/spi.h>
  32
  33 #include "host.h"
  34 #include "decl.h"
  35 #include "defs.h"
  36 #include "dev.h"
  37 #include "if_spi.h"
  38
  39 struct if_spi_packet {
  40         struct list_head                list;
  41         u16                             blen;
  42         u8                              buffer[0] __attribute__((aligned(4)));
  43 };
  44
  45 struct if_spi_card {
  46         struct spi_device               *spi;
  47         struct lbs_private              *priv;
  48         struct libertas_spi_platform_data *pdata;
  49
  50         /* The card ID and card revision, as reported by the hardware. */
  51         u16                             card_id;
  52         u8                              card_rev;
  53
  54         /* The last time that we initiated an SPU operation */
  55         unsigned long                   prev_xfer_time;
  56
  57         int                             use_dummy_writes;
  58         unsigned long                   spu_port_delay;
  59         unsigned long                   spu_reg_delay;
  60
  61         /* Handles all SPI communication (except for FW load) */
  62         struct workqueue_struct         *workqueue;
  63         struct work_struct              packet_work;
  64         struct work_struct              resume_work;
  65
  66         u8                              cmd_buffer[IF_SPI_CMD_BUF_SIZE];
  67
  68         /* A buffer of incoming packets from libertas core.
  69          * Since we can't sleep in hw_host_to_card, we have to buffer
  70          * them. */
  71         struct list_head                cmd_packet_list;
  72         struct list_head                data_packet_list;
  73
  74         /* Protects cmd_packet_list and data_packet_list */
  75         spinlock_t                      buffer_lock;
  76
  77         /* True is card suspended */
  78         u8                              suspended;
  79 };
  80
  81 static void free_if_spi_card(struct if_spi_card *card)
  82 {
  83         struct list_head *cursor, *next;
  84         struct if_spi_packet *packet;
  85
  86         list_for_each_safe(cursor, next, &card->cmd_packet_list) {
  87                 packet = container_of(cursor, struct if_spi_packet, list);
  88                 list_del(&packet->list);
  89                 kfree(packet);
  90         }
  91         list_for_each_safe(cursor, next, &card->data_packet_list) {
  92                 packet = container_of(cursor, struct if_spi_packet, list);
  93                 list_del(&packet->list);
  94                 kfree(packet);
  95         }
  96         kfree(card);
  97 }
  98
  99 #define MODEL_8385      0x04
 100 #define MODEL_8686      0x0b
 101 #define MODEL_8688      0x10
 102
 103 static const struct lbs_fw_table fw_table[] = {
 104         { MODEL_8385, "libertas/gspi8385_helper.bin", "libertas/gspi8385.bin" },
 105         { MODEL_8385, "libertas/gspi8385_hlp.bin", "libertas/gspi8385.bin" },
 106         { MODEL_8686, "libertas/gspi8686_v9_helper.bin", "libertas/gspi8686_v9.bin" },
 107         { MODEL_8686, "libertas/gspi8686_hlp.bin", "libertas/gspi8686.bin" },
 108         { MODEL_8688, "libertas/gspi8688_helper.bin", "libertas/gspi8688.bin" },
 109         { 0, NULL, NULL }
 110 };
 111 MODULE_FIRMWARE("libertas/gspi8385_helper.bin");
 112 MODULE_FIRMWARE("libertas/gspi8385_hlp.bin");
 113 MODULE_FIRMWARE("libertas/gspi8385.bin");
 114 MODULE_FIRMWARE("libertas/gspi8686_v9_helper.bin");
 115 MODULE_FIRMWARE("libertas/gspi8686_v9.bin");
 116 MODULE_FIRMWARE("libertas/gspi8686_hlp.bin");
 117 MODULE_FIRMWARE("libertas/gspi8686.bin");
 118 MODULE_FIRMWARE("libertas/gspi8688_helper.bin");
 119 MODULE_FIRMWARE("libertas/gspi8688.bin");
 120
 121
 122 /*
 123  * SPI Interface Unit Routines
 124  *
 125  * The SPU sits between the host and the WLAN module.
 126  * All communication with the firmware is through SPU transactions.
 127  *
 128  * First we have to put a SPU register name on the bus. Then we can
 129  * either read from or write to that register.
 130  *
 131  */
 132
 133 static void spu_transaction_init(struct if_spi_card *card)
 134 {
 135         if (!time_after(jiffies, card->prev_xfer_time + 1)) {
 136                 /* Unfortunately, the SPU requires a delay between successive
 137                  * transactions. If our last transaction was more than a jiffy
 138                  * ago, we have obviously already delayed enough.
 139                  * If not, we have to busy-wait to be on the safe side. */
 140                 ndelay(400);
 141         }
 142 }
 143
 144 static void spu_transaction_finish(struct if_spi_card *card)
 145 {
 146         card->prev_xfer_time = jiffies;
 147 }
 148
 149 /*
 150  * Write out a byte buffer to an SPI register,
 151  * using a series of 16-bit transfers.
 152  */
 153 static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
 154 {
 155         int err = 0;
 156         __le16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK);
 157         struct spi_message m;
 158         struct spi_transfer reg_trans;
 159         struct spi_transfer data_trans;
 160
 161         spi_message_init(&m);
 162         memset(&reg_trans, 0, sizeof(reg_trans));
 163         memset(&data_trans, 0, sizeof(data_trans));
 164
 165         /* You must give an even number of bytes to the SPU, even if it
 166          * doesn't care about the last one.  */
 167         BUG_ON(len & 0x1);
 168
 169         spu_transaction_init(card);
 170
 171         /* write SPU register index */
 172         reg_trans.tx_buf = &reg_out;
 173         reg_trans.len = sizeof(reg_out);
 174
 175         data_trans.tx_buf = buf;
 176         data_trans.len = len;
 177
 178         spi_message_add_tail(&reg_trans, &m);
 179         spi_message_add_tail(&data_trans, &m);
 180
 181         err = spi_sync(card->spi, &m);
 182         spu_transaction_finish(card);
 183         return err;
 184 }
 185
 186 static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val)
 187 {
 188         __le16 buff;
 189
 190         buff = cpu_to_le16(val);
 191         return spu_write(card, reg, (u8 *)&buff, sizeof(u16));
 192 }
 193
 194 static inline int spu_reg_is_port_reg(u16 reg)
 195 {
 196         switch (reg) {
 197         case IF_SPI_IO_RDWRPORT_REG:
 198         case IF_SPI_CMD_RDWRPORT_REG:
 199         case IF_SPI_DATA_RDWRPORT_REG:
 200                 return 1;
 201         default:
 202                 return 0;
 203         }
 204 }
 205
 206 static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len)
 207 {
 208         unsigned int delay;
 209         int err = 0;
 210         __le16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK);
 211         struct spi_message m;
 212         struct spi_transfer reg_trans;
 213         struct spi_transfer dummy_trans;
 214         struct spi_transfer data_trans;
 215
 216         /*
 217          * You must take an even number of bytes from the SPU, even if you
 218          * don't care about the last one.
 219          */
 220         BUG_ON(len & 0x1);
 221
 222         spu_transaction_init(card);
 223
 224         spi_message_init(&m);
 225         memset(&reg_trans, 0, sizeof(reg_trans));
 226         memset(&dummy_trans, 0, sizeof(dummy_trans));
 227         memset(&data_trans, 0, sizeof(data_trans));
 228
 229         /* write SPU register index */
 230         reg_trans.tx_buf = &reg_out;
 231         reg_trans.len = sizeof(reg_out);
 232         spi_message_add_tail(&reg_trans, &m);
 233
 234         delay = spu_reg_is_port_reg(reg) ? card->spu_port_delay :
 235                                                 card->spu_reg_delay;
 236         if (card->use_dummy_writes) {
 237                 /* Clock in dummy cycles while the SPU fills the FIFO */
 238                 dummy_trans.len = delay / 8;
 239                 spi_message_add_tail(&dummy_trans, &m);
 240         } else {
 241                 /* Busy-wait while the SPU fills the FIFO */
 242                 reg_trans.delay_usecs =
 243                         DIV_ROUND_UP((100 + (delay * 10)), 1000);
 244         }
 245
 246         /* read in data */
 247         data_trans.rx_buf = buf;
 248         data_trans.len = len;
 249         spi_message_add_tail(&data_trans, &m);
 250
 251         err = spi_sync(card->spi, &m);
 252         spu_transaction_finish(card);
 253         return err;
 254 }
 255
 256 /* Read 16 bits from an SPI register */
 257 static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val)
 258 {
 259         __le16 buf;
 260         int ret;
 261
 262         ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
 263         if (ret == 0)
 264                 *val = le16_to_cpup(&buf);
 265         return ret;
 266 }
 267
 268 /*
 269  * Read 32 bits from an SPI register.
 270  * The low 16 bits are read first.
 271  */
 272 static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val)
 273 {
 274         __le32 buf;
 275         int err;
 276
 277         err = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
 278         if (!err)
 279                 *val = le32_to_cpup(&buf);
 280         return err;
 281 }
 282
 283 /*
 284  * Keep reading 16 bits from an SPI register until you get the correct result.
 285  *
 286  * If mask = 0, the correct result is any non-zero number.
 287  * If mask != 0, the correct result is any number where
 288  * number & target_mask == target
 289  *
 290  * Returns -ETIMEDOUT if a second passes without the correct result.
 291  */
 292 static int spu_wait_for_u16(struct if_spi_card *card, u16 reg,
 293                         u16 target_mask, u16 target)
 294 {
 295         int err;
 296         unsigned long timeout = jiffies + 5*HZ;
 297         while (1) {
 298                 u16 val;
 299                 err = spu_read_u16(card, reg, &val);
 300                 if (err)
 301                         return err;
 302                 if (target_mask) {
 303                         if ((val & target_mask) == target)
 304                                 return 0;
 305                 } else {
 306                         if (val)
 307                                 return 0;
 308                 }
 309                 udelay(100);
 310                 if (time_after(jiffies, timeout)) {
 311                         pr_err("%s: timeout with val=%02x, target_mask=%02x, target=%02x\n",
 312                                __func__, val, target_mask, target);
 313                         return -ETIMEDOUT;
 314                 }
 315         }
 316 }
 317
 318 /*
 319  * Read 16 bits from an SPI register until you receive a specific value.
 320  * Returns -ETIMEDOUT if a 4 tries pass without success.
 321  */
 322 static int spu_wait_for_u32(struct if_spi_card *card, u32 reg, u32 target)
 323 {
 324         int err, try;
 325         for (try = 0; try < 4; ++try) {
 326                 u32 val = 0;
 327                 err = spu_read_u32(card, reg, &val);
 328                 if (err)
 329                         return err;
 330                 if (val == target)
 331                         return 0;
 332                 mdelay(100);
 333         }
 334         return -ETIMEDOUT;
 335 }
 336
 337 static int spu_set_interrupt_mode(struct if_spi_card *card,
 338                            int suppress_host_int,
 339                            int auto_int)
 340 {
 341         int err = 0;
 342
 343         /*
 344          * We can suppress a host interrupt by clearing the appropriate
 345          * bit in the "host interrupt status mask" register
 346          */
 347         if (suppress_host_int) {
 348                 err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, 0);
 349                 if (err)
 350                         return err;
 351         } else {
 352                 err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG,
 353                               IF_SPI_HISM_TX_DOWNLOAD_RDY |
 354                               IF_SPI_HISM_RX_UPLOAD_RDY |
 355                               IF_SPI_HISM_CMD_DOWNLOAD_RDY |
 356                               IF_SPI_HISM_CARDEVENT |
 357                               IF_SPI_HISM_CMD_UPLOAD_RDY);
 358                 if (err)
 359                         return err;
 360         }
 361
 362         /*
 363          * If auto-interrupts are on, the completion of certain transactions
 364          * will trigger an interrupt automatically. If auto-interrupts
 365          * are off, we need to set the "Card Interrupt Cause" register to
 366          * trigger a card interrupt.
 367          */
 368         if (auto_int) {
 369                 err = spu_write_u16(card, IF_SPI_HOST_INT_CTRL_REG,
 370                                 IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO |
 371                                 IF_SPI_HICT_RX_UPLOAD_OVER_AUTO |
 372                                 IF_SPI_HICT_CMD_DOWNLOAD_OVER_AUTO |
 373                                 IF_SPI_HICT_CMD_UPLOAD_OVER_AUTO);
 374                 if (err)
 375                         return err;
 376         } else {
 377                 err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, 0);
 378                 if (err)
 379                         return err;
 380         }
 381         return err;
 382 }
 383
 384 static int spu_get_chip_revision(struct if_spi_card *card,
 385                                   u16 *card_id, u8 *card_rev)
 386 {
 387         int err = 0;
 388         u32 dev_ctrl;
 389         err = spu_read_u32(card, IF_SPI_DEVICEID_CTRL_REG, &dev_ctrl);
 390         if (err)
 391                 return err;
 392         *card_id = IF_SPI_DEVICEID_CTRL_REG_TO_CARD_ID(dev_ctrl);
 393         *card_rev = IF_SPI_DEVICEID_CTRL_REG_TO_CARD_REV(dev_ctrl);
 394         return err;
 395 }
 396
 397 static int spu_set_bus_mode(struct if_spi_card *card, u16 mode)
 398 {
 399         int err = 0;
 400         u16 rval;
 401         /* set bus mode */
 402         err = spu_write_u16(card, IF_SPI_SPU_BUS_MODE_REG, mode);
 403         if (err)
 404                 return err;
 405         /* Check that we were able to read back what we just wrote. */
 406         err = spu_read_u16(card, IF_SPI_SPU_BUS_MODE_REG, &rval);
 407         if (err)
 408                 return err;
 409         if ((rval & 0xF) != mode) {
 410                 pr_err("Can't read bus mode register\n");
 411                 return -EIO;
 412         }
 413         return 0;
 414 }
 415
 416 static int spu_init(struct if_spi_card *card, int use_dummy_writes)
 417 {
 418         int err = 0;
 419         u32 delay;
 420
 421         /*
 422          * We have to start up in timed delay mode so that we can safely
 423          * read the Delay Read Register.
 424          */
 425         card->use_dummy_writes = 0;
 426         err = spu_set_bus_mode(card,
 427                                 IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING |
 428                                 IF_SPI_BUS_MODE_DELAY_METHOD_TIMED |
 429                                 IF_SPI_BUS_MODE_16_BIT_ADDRESS_16_BIT_DATA);
 430         if (err)
 431                 return err;
 432         card->spu_port_delay = 1000;
 433         card->spu_reg_delay = 1000;
 434         err = spu_read_u32(card, IF_SPI_DELAY_READ_REG, &delay);
 435         if (err)
 436                 return err;
 437         card->spu_port_delay = delay & 0x0000ffff;
 438         card->spu_reg_delay = (delay & 0xffff0000) >> 16;
 439
 440         /* If dummy clock delay mode has been requested, switch to it now */
 441         if (use_dummy_writes) {
 442                 card->use_dummy_writes = 1;
 443                 err = spu_set_bus_mode(card,
 444                                 IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING |
 445                                 IF_SPI_BUS_MODE_DELAY_METHOD_DUMMY_CLOCK |
 446                                 IF_SPI_BUS_MODE_16_BIT_ADDRESS_16_BIT_DATA);
 447                 if (err)
 448                         return err;
 449         }
 450
 451         lbs_deb_spi("Initialized SPU unit. "
 452                     "spu_port_delay=0x%04lx, spu_reg_delay=0x%04lx\n",
 453                     card->spu_port_delay, card->spu_reg_delay);
 454         return err;
 455 }
 456
 457 /*
 458  * Firmware Loading
 459  */
 460
 461 static int if_spi_prog_helper_firmware(struct if_spi_card *card,
 462                                         const struct firmware *firmware)
 463 {
 464         int err = 0;
 465         int bytes_remaining;
 466         const u8 *fw;
 467         u8 temp[HELPER_FW_LOAD_CHUNK_SZ];
 468
 469         lbs_deb_enter(LBS_DEB_SPI);
 470
 471         err = spu_set_interrupt_mode(card, 1, 0);
 472         if (err)
 473                 goto out;
 474
 475         bytes_remaining = firmware->size;
 476         fw = firmware->data;
 477
 478         /* Load helper firmware image */
 479         while (bytes_remaining > 0) {
 480                 /*
 481                  * Scratch pad 1 should contain the number of bytes we
 482                  * want to download to the firmware
 483                  */
 484                 err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG,
 485                                         HELPER_FW_LOAD_CHUNK_SZ);
 486                 if (err)
 487                         goto out;
 488
 489                 err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG,
 490                                         IF_SPI_HIST_CMD_DOWNLOAD_RDY,
 491                                         IF_SPI_HIST_CMD_DOWNLOAD_RDY);
 492                 if (err)
 493                         goto out;
 494
 495                 /*
 496                  * Feed the data into the command read/write port reg
 497                  * in chunks of 64 bytes
 498                  */
 499                 memset(temp, 0, sizeof(temp));
 500                 memcpy(temp, fw,
 501                        min(bytes_remaining, HELPER_FW_LOAD_CHUNK_SZ));
 502                 mdelay(10);
 503                 err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG,
 504                                         temp, HELPER_FW_LOAD_CHUNK_SZ);
 505                 if (err)
 506                         goto out;
 507
 508                 /* Interrupt the boot code */
 509                 err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0);
 510                 if (err)
 511                         goto out;
 512                 err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG,
 513                                        IF_SPI_CIC_CMD_DOWNLOAD_OVER);
 514                 if (err)
 515                         goto out;
 516                 bytes_remaining -= HELPER_FW_LOAD_CHUNK_SZ;
 517                 fw += HELPER_FW_LOAD_CHUNK_SZ;
 518         }
 519
 520         /*
 521          * Once the helper / single stage firmware download is complete,
 522          * write 0 to scratch pad 1 and interrupt the
 523          * bootloader. This completes the helper download.
 524          */
 525         err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG, FIRMWARE_DNLD_OK);
 526         if (err)
 527                 goto out;
 528         err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0);
 529         if (err)
 530                 goto out;
 531         err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG,
 532                                 IF_SPI_CIC_CMD_DOWNLOAD_OVER);
 533 out:
 534         if (err)
 535                 pr_err("failed to load helper firmware (err=%d)\n", err);
 536         lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err);
 537         return err;
 538 }
 539
 540 /*
 541  * Returns the length of the next packet the firmware expects us to send.
 542  * Sets crc_err if the previous transfer had a CRC error.
 543  */
 544 static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card,
 545                                                 int *crc_err)
 546 {
 547         u16 len;
 548         int err = 0;
 549
 550         /*
 551          * wait until the host interrupt status register indicates
 552          * that we are ready to download
 553          */
 554         err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG,
 555                                 IF_SPI_HIST_CMD_DOWNLOAD_RDY,
 556                                 IF_SPI_HIST_CMD_DOWNLOAD_RDY);
 557         if (err) {
 558                 pr_err("timed out waiting for host_int_status\n");
 559                 return err;
 560         }
 561
 562         /* Ask the device how many bytes of firmware it wants. */
 563         err = spu_read_u16(card, IF_SPI_SCRATCH_1_REG, &len);
 564         if (err)
 565                 return err;
 566
 567         if (len > IF_SPI_CMD_BUF_SIZE) {
 568                 pr_err("firmware load device requested a larger transfer than we are prepared to handle (len = %d)\n",
 569                        len);
 570                 return -EIO;
 571         }
 572         if (len & 0x1) {
 573                 lbs_deb_spi("%s: crc error\n", __func__);
 574                 len &= ~0x1;
 575                 *crc_err = 1;
 576         } else
 577                 *crc_err = 0;
 578
 579         return len;
 580 }
 581
 582 static int if_spi_prog_main_firmware(struct if_spi_card *card,
 583                                         const struct firmware *firmware)
 584 {
 585         struct lbs_private *priv = card->priv;
 586         int len, prev_len;
 587         int bytes, crc_err = 0, err = 0;
 588         const u8 *fw;
 589         u16 num_crc_errs;
 590
 591         lbs_deb_enter(LBS_DEB_SPI);
 592
 593         err = spu_set_interrupt_mode(card, 1, 0);
 594         if (err)
 595                 goto out;
 596
 597         err = spu_wait_for_u16(card, IF_SPI_SCRATCH_1_REG, 0, 0);
 598         if (err) {
 599                 netdev_err(priv->dev,
 600                            "%s: timed out waiting for initial scratch reg = 0\n",
 601                            __func__);
 602                 goto out;
 603         }
 604
 605         num_crc_errs = 0;
 606         prev_len = 0;
 607         bytes = firmware->size;
 608         fw = firmware->data;
 609         while ((len = if_spi_prog_main_firmware_check_len(card, &crc_err))) {
 610                 if (len < 0) {
 611                         err = len;
 612                         goto out;
 613                 }
 614                 if (bytes < 0) {
 615                         /*
 616                          * If there are no more bytes left, we would normally
 617                          * expect to have terminated with len = 0
 618                          */
 619                         netdev_err(priv->dev,
 620                                    "Firmware load wants more bytes than we have to offer.\n");
 621                         break;
 622                 }
 623                 if (crc_err) {
 624                         /* Previous transfer failed. */
 625                         if (++num_crc_errs > MAX_MAIN_FW_LOAD_CRC_ERR) {
 626                                 pr_err("Too many CRC errors encountered in firmware load.\n");
 627                                 err = -EIO;
 628                                 goto out;
 629                         }
 630                 } else {
 631                         /* Previous transfer succeeded. Advance counters. */
 632                         bytes -= prev_len;
 633                         fw += prev_len;
 634                 }
 635                 if (bytes < len) {
 636                         memset(card->cmd_buffer, 0, len);
 637                         memcpy(card->cmd_buffer, fw, bytes);
 638                 } else
 639                         memcpy(card->cmd_buffer, fw, len);
 640
 641                 err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0);
 642                 if (err)
 643                         goto out;
 644                 err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG,
 645                                 card->cmd_buffer, len);
 646                 if (err)
 647                         goto out;
 648                 err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG ,
 649                                         IF_SPI_CIC_CMD_DOWNLOAD_OVER);
 650                 if (err)
 651                         goto out;
 652                 prev_len = len;
 653         }
 654         if (bytes > prev_len) {
 655                 pr_err("firmware load wants fewer bytes than we have to offer\n");
 656         }
 657
 658         /* Confirm firmware download */
 659         err = spu_wait_for_u32(card, IF_SPI_SCRATCH_4_REG,
 660                                         SUCCESSFUL_FW_DOWNLOAD_MAGIC);
 661         if (err) {
 662                 pr_err("failed to confirm the firmware download\n");
 663                 goto out;
 664         }
 665
 666 out:
 667         if (err)
 668                 pr_err("failed to load firmware (err=%d)\n", err);
 669         lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err);
 670         return err;
 671 }
 672
 673 /*
 674  * SPI Transfer Thread
 675  *
 676  * The SPI worker handles all SPI transfers, so there is no need for a lock.
 677  */
 678
 679 /* Move a command from the card to the host */
 680 static int if_spi_c2h_cmd(struct if_spi_card *card)
 681 {
 682         struct lbs_private *priv = card->priv;
 683         unsigned long flags;
 684         int err = 0;
 685         u16 len;
 686         u8 i;
 687
 688         /*
 689          * We need a buffer big enough to handle whatever people send to
 690          * hw_host_to_card
 691          */
 692         BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_CMD_BUFFER_SIZE);
 693         BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_UPLD_SIZE);
 694
 695         /*
 696          * It's just annoying if the buffer size isn't a multiple of 4, because
 697          * then we might have len < IF_SPI_CMD_BUF_SIZE but
 698          * ALIGN(len, 4) > IF_SPI_CMD_BUF_SIZE
 699          */
 700         BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE % 4 != 0);
 701
 702         lbs_deb_enter(LBS_DEB_SPI);
 703
 704         /* How many bytes are there to read? */
 705         err = spu_read_u16(card, IF_SPI_SCRATCH_2_REG, &len);
 706         if (err)
 707                 goto out;
 708         if (!len) {
 709                 netdev_err(priv->dev, "%s: error: card has no data for host\n",
 710                            __func__);
 711                 err = -EINVAL;
 712                 goto out;
 713         } else if (len > IF_SPI_CMD_BUF_SIZE) {
 714                 netdev_err(priv->dev,
 715                            "%s: error: response packet too large: %d bytes, but maximum is %d\n",
 716                            __func__, len, IF_SPI_CMD_BUF_SIZE);
 717                 err = -EINVAL;
 718                 goto out;
 719         }
 720
 721         /* Read the data from the WLAN module into our command buffer */
 722         err = spu_read(card, IF_SPI_CMD_RDWRPORT_REG,
 723                                 card->cmd_buffer, ALIGN(len, 4));
 724         if (err)
 725                 goto out;
 726
 727         spin_lock_irqsave(&priv->driver_lock, flags);
 728         i = (priv->resp_idx == 0) ? 1 : 0;
 729         BUG_ON(priv->resp_len[i]);
 730         priv->resp_len[i] = len;
 731         memcpy(priv->resp_buf[i], card->cmd_buffer, len);
 732         lbs_notify_command_response(priv, i);
 733         spin_unlock_irqrestore(&priv->driver_lock, flags);
 734
 735 out:
 736         if (err)
 737                 netdev_err(priv->dev, "%s: err=%d\n", __func__, err);
 738         lbs_deb_leave(LBS_DEB_SPI);
 739         return err;
 740 }
 741
 742 /* Move data from the card to the host */
 743 static int if_spi_c2h_data(struct if_spi_card *card)
 744 {
 745         struct lbs_private *priv = card->priv;
 746         struct sk_buff *skb;
 747         char *data;
 748         u16 len;
 749         int err = 0;
 750
 751         lbs_deb_enter(LBS_DEB_SPI);
 752
 753         /* How many bytes are there to read? */
 754         err = spu_read_u16(card, IF_SPI_SCRATCH_1_REG, &len);
 755         if (err)
 756                 goto out;
 757         if (!len) {
 758                 netdev_err(priv->dev, "%s: error: card has no data for host\n",
 759                            __func__);
 760                 err = -EINVAL;
 761                 goto out;
 762         } else if (len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
 763                 netdev_err(priv->dev,
 764                            "%s: error: card has %d bytes of data, but our maximum skb size is %zu\n",
 765                            __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
 766                 err = -EINVAL;
 767                 goto out;
 768         }
 769
 770         /* TODO: should we allocate a smaller skb if we have less data? */
 771         skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
 772         if (!skb) {
 773                 err = -ENOBUFS;
 774                 goto out;
 775         }
 776         skb_reserve(skb, IPFIELD_ALIGN_OFFSET);
 777         data = skb_put(skb, len);
 778
 779         /* Read the data from the WLAN module into our skb... */
 780         err = spu_read(card, IF_SPI_DATA_RDWRPORT_REG, data, ALIGN(len, 4));
 781         if (err)
 782                 goto free_skb;
 783
 784         /* pass the SKB to libertas */
 785         err = lbs_process_rxed_packet(card->priv, skb);
 786         if (err)
 787                 goto free_skb;
 788
 789         /* success */
 790         goto out;
 791
 792 free_skb:
 793         dev_kfree_skb(skb);
 794 out:
 795         if (err)
 796                 netdev_err(priv->dev, "%s: err=%d\n", __func__, err);
 797         lbs_deb_leave(LBS_DEB_SPI);
 798         return err;
 799 }
 800
 801 /* Move data or a command from the host to the card. */
 802 static void if_spi_h2c(struct if_spi_card *card,
 803                         struct if_spi_packet *packet, int type)
 804 {
 805         struct lbs_private *priv = card->priv;
 806         int err = 0;
 807         u16 int_type, port_reg;
 808
 809         switch (type) {
 810         case MVMS_DAT:
 811                 int_type = IF_SPI_CIC_TX_DOWNLOAD_OVER;
 812                 port_reg = IF_SPI_DATA_RDWRPORT_REG;
 813                 break;
 814         case MVMS_CMD:
 815                 int_type = IF_SPI_CIC_CMD_DOWNLOAD_OVER;
 816                 port_reg = IF_SPI_CMD_RDWRPORT_REG;
 817                 break;
 818         default:
 819                 netdev_err(priv->dev, "can't transfer buffer of type %d\n",
 820                            type);
 821                 err = -EINVAL;
 822                 goto out;
 823         }
 824
 825         /* Write the data to the card */
 826         err = spu_write(card, port_reg, packet->buffer, packet->blen);
 827         if (err)
 828                 goto out;
 829
 830 out:
 831         kfree(packet);
 832
 833         if (err)
 834                 netdev_err(priv->dev, "%s: error %d\n", __func__, err);
 835 }
 836
 837 /* Inform the host about a card event */
 838 static void if_spi_e2h(struct if_spi_card *card)
 839 {
 840         int err = 0;
 841         u32 cause;
 842         struct lbs_private *priv = card->priv;
 843
 844         err = spu_read_u32(card, IF_SPI_SCRATCH_3_REG, &cause);
 845         if (err)
 846                 goto out;
 847
 848         /* re-enable the card event interrupt */
 849         spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG,
 850                         ~IF_SPI_HICU_CARD_EVENT);
 851
 852         /* generate a card interrupt */
 853         spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, IF_SPI_CIC_HOST_EVENT);
 854
 855         lbs_queue_event(priv, cause & 0xff);
 856 out:
 857         if (err)
 858                 netdev_err(priv->dev, "%s: error %d\n", __func__, err);
 859 }
 860
 861 static void if_spi_host_to_card_worker(struct work_struct *work)
 862 {
 863         int err;
 864         struct if_spi_card *card;
 865         u16 hiStatus;
 866         unsigned long flags;
 867         struct if_spi_packet *packet;
 868         struct lbs_private *priv;
 869
 870         card = container_of(work, struct if_spi_card, packet_work);
 871         priv = card->priv;
 872
 873         lbs_deb_enter(LBS_DEB_SPI);
 874
 875         /*
 876          * Read the host interrupt status register to see what we
 877          * can do.
 878          */
 879         err = spu_read_u16(card, IF_SPI_HOST_INT_STATUS_REG,
 880                                 &hiStatus);
 881         if (err) {
 882                 netdev_err(priv->dev, "I/O error\n");
 883                 goto err;
 884         }
 885
 886         if (hiStatus & IF_SPI_HIST_CMD_UPLOAD_RDY) {
 887                 err = if_spi_c2h_cmd(card);
 888                 if (err)
 889                         goto err;
 890         }
 891         if (hiStatus & IF_SPI_HIST_RX_UPLOAD_RDY) {
 892                 err = if_spi_c2h_data(card);
 893                 if (err)
 894                         goto err;
 895         }
 896
 897         /*
 898          * workaround: in PS mode, the card does not set the Command
 899          * Download Ready bit, but it sets TX Download Ready.
 900          */
 901         if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY ||
 902            (card->priv->psstate != PS_STATE_FULL_POWER &&
 903             (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) {
 904                 /*
 905                  * This means two things. First of all,
 906                  * if there was a previous command sent, the card has
 907                  * successfully received it.
 908                  * Secondly, it is now ready to download another
 909                  * command.
 910                  */
 911                 lbs_host_to_card_done(card->priv);
 912
 913                 /* Do we have any command packets from the host to send? */
 914                 packet = NULL;
 915                 spin_lock_irqsave(&card->buffer_lock, flags);
 916                 if (!list_empty(&card->cmd_packet_list)) {
 917                         packet = (struct if_spi_packet *)(card->
 918                                         cmd_packet_list.next);
 919                         list_del(&packet->list);
 920                 }
 921                 spin_unlock_irqrestore(&card->buffer_lock, flags);
 922
 923                 if (packet)
 924                         if_spi_h2c(card, packet, MVMS_CMD);
 925         }
 926         if (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY) {
 927                 /* Do we have any data packets from the host to send? */
 928                 packet = NULL;
 929                 spin_lock_irqsave(&card->buffer_lock, flags);
 930                 if (!list_empty(&card->data_packet_list)) {
 931                         packet = (struct if_spi_packet *)(card->
 932                                         data_packet_list.next);
 933                         list_del(&packet->list);
 934                 }
 935                 spin_unlock_irqrestore(&card->buffer_lock, flags);
 936
 937                 if (packet)
 938                         if_spi_h2c(card, packet, MVMS_DAT);
 939         }
 940         if (hiStatus & IF_SPI_HIST_CARD_EVENT)
 941                 if_spi_e2h(card);
 942
 943 err:
 944         if (err)
 945                 netdev_err(priv->dev, "%s: got error %d\n", __func__, err);
 946
 947         lbs_deb_leave(LBS_DEB_SPI);
 948 }
 949
 950 /*
 951  * Host to Card
 952  *
 953  * Called from Libertas to transfer some data to the WLAN device
 954  * We can't sleep here.
 955  */
 956 static int if_spi_host_to_card(struct lbs_private *priv,
 957                                 u8 type, u8 *buf, u16 nb)
 958 {
 959         int err = 0;
 960         unsigned long flags;
 961         struct if_spi_card *card = priv->card;
 962         struct if_spi_packet *packet;
 963         u16 blen;
 964
 965         lbs_deb_enter_args(LBS_DEB_SPI, "type %d, bytes %d", type, nb);
 966
 967         if (nb == 0) {
 968                 netdev_err(priv->dev, "%s: invalid size requested: %d\n",
 969                            __func__, nb);
 970                 err = -EINVAL;
 971                 goto out;
 972         }
 973         blen = ALIGN(nb, 4);
 974         packet = kzalloc(sizeof(struct if_spi_packet) + blen, GFP_ATOMIC);
 975         if (!packet) {
 976                 err = -ENOMEM;
 977                 goto out;
 978         }
 979         packet->blen = blen;
 980         memcpy(packet->buffer, buf, nb);
 981         memset(packet->buffer + nb, 0, blen - nb);
 982
 983         switch (type) {
 984         case MVMS_CMD:
 985                 priv->dnld_sent = DNLD_CMD_SENT;
 986                 spin_lock_irqsave(&card->buffer_lock, flags);
 987                 list_add_tail(&packet->list, &card->cmd_packet_list);
 988                 spin_unlock_irqrestore(&card->buffer_lock, flags);
 989                 break;
 990         case MVMS_DAT:
 991                 priv->dnld_sent = DNLD_DATA_SENT;
 992                 spin_lock_irqsave(&card->buffer_lock, flags);
 993                 list_add_tail(&packet->list, &card->data_packet_list);
 994                 spin_unlock_irqrestore(&card->buffer_lock, flags);
 995                 break;
 996         default:
 997                 kfree(packet);
 998                 netdev_err(priv->dev, "can't transfer buffer of type %d\n",
 999                            type);
1000                 err = -EINVAL;
1001                 break;
1002         }
1003
1004         /* Queue spi xfer work */
1005         queue_work(card->workqueue, &card->packet_work);
1006 out:
1007         lbs_deb_leave_args(LBS_DEB_SPI, "err=%d", err);
1008         return err;
1009 }
1010
1011 /*
1012  * Host Interrupts
1013  *
1014  * Service incoming interrupts from the WLAN device. We can't sleep here, so
1015  * don't try to talk on the SPI bus, just queue the SPI xfer work.
1016  */
1017 static irqreturn_t if_spi_host_interrupt(int irq, void *dev_id)
1018 {
1019         struct if_spi_card *card = dev_id;
1020
1021         queue_work(card->workqueue, &card->packet_work);
1022
1023         return IRQ_HANDLED;
1024 }
1025
1026 /*
1027  * SPI callbacks
1028  */
1029
1030 static int if_spi_init_card(struct if_spi_card *card)
1031 {
1032         struct lbs_private *priv = card->priv;
1033         int err, i;
1034         u32 scratch;
1035         const struct firmware *helper = NULL;
1036         const struct firmware *mainfw = NULL;
1037
1038         lbs_deb_enter(LBS_DEB_SPI);
1039
1040         err = spu_init(card, card->pdata->use_dummy_writes);
1041         if (err)
1042                 goto out;
1043         err = spu_get_chip_revision(card, &card->card_id, &card->card_rev);
1044         if (err)
1045                 goto out;
1046
1047         err = spu_read_u32(card, IF_SPI_SCRATCH_4_REG, &scratch);
1048         if (err)
1049                 goto out;
1050         if (scratch == SUCCESSFUL_FW_DOWNLOAD_MAGIC)
1051                 lbs_deb_spi("Firmware is already loaded for "
1052                             "Marvell WLAN 802.11 adapter\n");
1053         else {
1054                 /* Check if we support this card */
1055                 for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
1056                         if (card->card_id == fw_table[i].model)
1057                                 break;
1058                 }
1059                 if (i == ARRAY_SIZE(fw_table)) {
1060                         netdev_err(priv->dev, "Unsupported chip_id: 0x%02x\n",
1061                                    card->card_id);
1062                         err = -ENODEV;
1063                         goto out;
1064                 }
1065
1066                 err = lbs_get_firmware(&card->spi->dev, card->card_id,
1067                                         &fw_table[0], &helper, &mainfw);
1068                 if (err) {
1069                         netdev_err(priv->dev, "failed to find firmware (%d)\n",
1070                                    err);
1071                         goto out;
1072                 }
1073
1074                 lbs_deb_spi("Initializing FW for Marvell WLAN 802.11 adapter "
1075                                 "(chip_id = 0x%04x, chip_rev = 0x%02x) "
1076                                 "attached to SPI bus_num %d, chip_select %d. "
1077                                 "spi->max_speed_hz=%d\n",
1078                                 card->card_id, card->card_rev,
1079                                 card->spi->master->bus_num,
1080                                 card->spi->chip_select,
1081                                 card->spi->max_speed_hz);
1082                 err = if_spi_prog_helper_firmware(card, helper);
1083                 if (err)
1084                         goto out;
1085                 err = if_spi_prog_main_firmware(card, mainfw);
1086                 if (err)
1087                         goto out;
1088                 lbs_deb_spi("loaded FW for Marvell WLAN 802.11 adapter\n");
1089         }
1090
1091         err = spu_set_interrupt_mode(card, 0, 1);
1092         if (err)
1093                 goto out;
1094
1095 out:
1096         lbs_deb_leave_args(LBS_DEB_SPI, "err %d\n", err);
1097         return err;
1098 }
1099
1100 static void if_spi_resume_worker(struct work_struct *work)
1101 {
1102         struct if_spi_card *card;
1103
1104         card = container_of(work, struct if_spi_card, resume_work);
1105
1106         if (card->suspended) {
1107                 if (card->pdata->setup)
1108                         card->pdata->setup(card->spi);
1109
1110                 /* Init card ... */
1111                 if_spi_init_card(card);
1112
1113                 enable_irq(card->spi->irq);
1114
1115                 /* And resume it ... */
1116                 lbs_resume(card->priv);
1117
1118                 card->suspended = 0;
1119         }
1120 }
1121
1122 static int if_spi_probe(struct spi_device *spi)
1123 {
1124         struct if_spi_card *card;
1125         struct lbs_private *priv = NULL;
1126         struct libertas_spi_platform_data *pdata = dev_get_platdata(&spi->dev);
1127         int err = 0;
1128
1129         lbs_deb_enter(LBS_DEB_SPI);
1130
1131         if (!pdata) {
1132                 err = -EINVAL;
1133                 goto out;
1134         }
1135
1136         if (pdata->setup) {
1137                 err = pdata->setup(spi);
1138                 if (err)
1139                         goto out;
1140         }
1141
1142         /* Allocate card structure to represent this specific device */
1143         card = kzalloc(sizeof(struct if_spi_card), GFP_KERNEL);
1144         if (!card) {
1145                 err = -ENOMEM;
1146                 goto teardown;
1147         }
1148         spi_set_drvdata(spi, card);
1149         card->pdata = pdata;
1150         card->spi = spi;
1151         card->prev_xfer_time = jiffies;
1152
1153         INIT_LIST_HEAD(&card->cmd_packet_list);
1154         INIT_LIST_HEAD(&card->data_packet_list);
1155         spin_lock_init(&card->buffer_lock);
1156
1157         /* Initialize the SPI Interface Unit */
1158
1159         /* Firmware load */
1160         err = if_spi_init_card(card);
1161         if (err)
1162                 goto free_card;
1163
1164         /*
1165          * Register our card with libertas.
1166          * This will call alloc_etherdev.
1167          */
1168         priv = lbs_add_card(card, &spi->dev);
1169         if (!priv) {
1170                 err = -ENOMEM;
1171                 goto free_card;
1172         }
1173         card->priv = priv;
1174         priv->setup_fw_on_resume = 1;
1175         priv->card = card;
1176         priv->hw_host_to_card = if_spi_host_to_card;
1177         priv->enter_deep_sleep = NULL;
1178         priv->exit_deep_sleep = NULL;
1179         priv->reset_deep_sleep_wakeup = NULL;
1180         priv->fw_ready = 1;
1181
1182         /* Initialize interrupt handling stuff. */
1183         card->workqueue = create_workqueue("libertas_spi");
1184         INIT_WORK(&card->packet_work, if_spi_host_to_card_worker);
1185         INIT_WORK(&card->resume_work, if_spi_resume_worker);
1186
1187         err = request_irq(spi->irq, if_spi_host_interrupt,
1188                         IRQF_TRIGGER_FALLING, "libertas_spi", card);
1189         if (err) {
1190                 pr_err("can't get host irq line-- request_irq failed\n");
1191                 goto terminate_workqueue;
1192         }
1193
1194         /*
1195          * Start the card.
1196          * This will call register_netdev, and we'll start
1197          * getting interrupts...
1198          */
1199         err = lbs_start_card(priv);
1200         if (err)
1201                 goto release_irq;
1202
1203         lbs_deb_spi("Finished initializing WLAN module.\n");
1204
1205         /* successful exit */
1206         goto out;
1207
1208 release_irq:
1209         free_irq(spi->irq, card);
1210 terminate_workqueue:
1211         flush_workqueue(card->workqueue);
1212         destroy_workqueue(card->workqueue);
1213         lbs_remove_card(priv); /* will call free_netdev */
1214 free_card:
1215         free_if_spi_card(card);
1216 teardown:
1217         if (pdata->teardown)
1218                 pdata->teardown(spi);
1219 out:
1220         lbs_deb_leave_args(LBS_DEB_SPI, "err %d\n", err);
1221         return err;
1222 }
1223
1224 static int libertas_spi_remove(struct spi_device *spi)
1225 {
1226         struct if_spi_card *card = spi_get_drvdata(spi);
1227         struct lbs_private *priv = card->priv;
1228
1229         lbs_deb_spi("libertas_spi_remove\n");
1230         lbs_deb_enter(LBS_DEB_SPI);
1231
1232         cancel_work_sync(&card->resume_work);
1233
1234         lbs_stop_card(priv);
1235         lbs_remove_card(priv); /* will call free_netdev */
1236
1237         free_irq(spi->irq, card);
1238         flush_workqueue(card->workqueue);
1239         destroy_workqueue(card->workqueue);
1240         if (card->pdata->teardown)
1241                 card->pdata->teardown(spi);
1242         free_if_spi_card(card);
1243         lbs_deb_leave(LBS_DEB_SPI);
1244         return 0;
1245 }
1246
1247 static int if_spi_suspend(struct device *dev)
1248 {
1249         struct spi_device *spi = to_spi_device(dev);
1250         struct if_spi_card *card = spi_get_drvdata(spi);
1251
1252         if (!card->suspended) {
1253                 lbs_suspend(card->priv);
1254                 flush_workqueue(card->workqueue);
1255                 disable_irq(spi->irq);
1256
1257                 if (card->pdata->teardown)
1258                         card->pdata->teardown(spi);
1259                 card->suspended = 1;
1260         }
1261
1262         return 0;
1263 }
1264
1265 static int if_spi_resume(struct device *dev)
1266 {
1267         struct spi_device *spi = to_spi_device(dev);
1268         struct if_spi_card *card = spi_get_drvdata(spi);
1269
1270         /* Schedule delayed work */
1271         schedule_work(&card->resume_work);
1272
1273         return 0;
1274 }
1275
1276 static const struct dev_pm_ops if_spi_pm_ops = {
1277         .suspend        = if_spi_suspend,
1278         .resume         = if_spi_resume,
1279 };
1280
1281 static struct spi_driver libertas_spi_driver = {
1282         .probe  = if_spi_probe,
1283         .remove = libertas_spi_remove,
1284         .driver = {
1285                 .name   = "libertas_spi",
1286                 .pm     = &if_spi_pm_ops,
1287         },
1288 };
1289
1290 /*
1291  * Module functions
1292  */
1293
1294 static int __init if_spi_init_module(void)
1295 {
1296         int ret = 0;
1297         lbs_deb_enter(LBS_DEB_SPI);
1298         printk(KERN_INFO "libertas_spi: Libertas SPI driver\n");
1299         ret = spi_register_driver(&libertas_spi_driver);
1300         lbs_deb_leave(LBS_DEB_SPI);
1301         return ret;
1302 }
1303
1304 static void __exit if_spi_exit_module(void)
1305 {
1306         lbs_deb_enter(LBS_DEB_SPI);
1307         spi_unregister_driver(&libertas_spi_driver);
1308         lbs_deb_leave(LBS_DEB_SPI);
1309 }
1310
1311 module_init(if_spi_init_module);
1312 module_exit(if_spi_exit_module);
1313
1314 MODULE_DESCRIPTION("Libertas SPI WLAN Driver");
1315 MODULE_AUTHOR("Andrey Yurovsky <andrey@cozybit.com>, "
1316               "Colin McCabe <colin@cozybit.com>");
1317 MODULE_LICENSE("GPL");
1318 MODULE_ALIAS("spi:libertas_spi");