drivers/net/wireless/rt2x00/rt2x00dev.c

   1 /*
   2         Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
   3         Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
   4         <http://rt2x00.serialmonkey.com>
   5
   6         This program is free software; you can redistribute it and/or modify
   7         it under the terms of the GNU General Public License as published by
   8         the Free Software Foundation; either version 2 of the License, or
   9         (at your option) any later version.
  10
  11         This program is distributed in the hope that it will be useful,
  12         but WITHOUT ANY WARRANTY; without even the implied warranty of
  13         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  14         GNU General Public License for more details.
  15
  16         You should have received a copy of the GNU General Public License
  17         along with this program; if not, write to the
  18         Free Software Foundation, Inc.,
  19         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  20  */
  21
  22 /*
  23         Module: rt2x00lib
  24         Abstract: rt2x00 generic device routines.
  25  */
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/slab.h>
  30 #include <linux/log2.h>
  31
  32 #include "rt2x00.h"
  33 #include "rt2x00lib.h"
  34
  35 /*
  36  * Utility functions.
  37  */
  38 u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev,
  39                          struct ieee80211_vif *vif)
  40 {
  41         /*
  42          * When in STA mode, bssidx is always 0 otherwise local_address[5]
  43          * contains the bss number, see BSS_ID_MASK comments for details.
  44          */
  45         if (rt2x00dev->intf_sta_count)
  46                 return 0;
  47         return vif->addr[5] & (rt2x00dev->ops->max_ap_intf - 1);
  48 }
  49 EXPORT_SYMBOL_GPL(rt2x00lib_get_bssidx);
  50
  51 /*
  52  * Radio control handlers.
  53  */
  54 int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
  55 {
  56         int status;
  57
  58         /*
  59          * Don't enable the radio twice.
  60          * And check if the hardware button has been disabled.
  61          */
  62         if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
  63                 return 0;
  64
  65         /*
  66          * Initialize all data queues.
  67          */
  68         rt2x00queue_init_queues(rt2x00dev);
  69
  70         /*
  71          * Enable radio.
  72          */
  73         status =
  74             rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_ON);
  75         if (status)
  76                 return status;
  77
  78         rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_ON);
  79
  80         rt2x00leds_led_radio(rt2x00dev, true);
  81         rt2x00led_led_activity(rt2x00dev, true);
  82
  83         set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
  84
  85         /*
  86          * Enable queues.
  87          */
  88         rt2x00queue_start_queues(rt2x00dev);
  89         rt2x00link_start_tuner(rt2x00dev);
  90         rt2x00link_start_agc(rt2x00dev);
  91         if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags))
  92                 rt2x00link_start_vcocal(rt2x00dev);
  93
  94         /*
  95          * Start watchdog monitoring.
  96          */
  97         rt2x00link_start_watchdog(rt2x00dev);
  98
  99         return 0;
 100 }
 101
 102 void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
 103 {
 104         if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 105                 return;
 106
 107         /*
 108          * Stop watchdog monitoring.
 109          */
 110         rt2x00link_stop_watchdog(rt2x00dev);
 111
 112         /*
 113          * Stop all queues
 114          */
 115         rt2x00link_stop_agc(rt2x00dev);
 116         if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags))
 117                 rt2x00link_stop_vcocal(rt2x00dev);
 118         rt2x00link_stop_tuner(rt2x00dev);
 119         rt2x00queue_stop_queues(rt2x00dev);
 120         rt2x00queue_flush_queues(rt2x00dev, true);
 121
 122         /*
 123          * Disable radio.
 124          */
 125         rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
 126         rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
 127         rt2x00led_led_activity(rt2x00dev, false);
 128         rt2x00leds_led_radio(rt2x00dev, false);
 129 }
 130
 131 static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
 132                                           struct ieee80211_vif *vif)
 133 {
 134         struct rt2x00_dev *rt2x00dev = data;
 135         struct rt2x00_intf *intf = vif_to_intf(vif);
 136
 137         /*
 138          * It is possible the radio was disabled while the work had been
 139          * scheduled. If that happens we should return here immediately,
 140          * note that in the spinlock protected area above the delayed_flags
 141          * have been cleared correctly.
 142          */
 143         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 144                 return;
 145
 146         if (test_and_clear_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags))
 147                 rt2x00queue_update_beacon(rt2x00dev, vif);
 148 }
 149
 150 static void rt2x00lib_intf_scheduled(struct work_struct *work)
 151 {
 152         struct rt2x00_dev *rt2x00dev =
 153             container_of(work, struct rt2x00_dev, intf_work);
 154
 155         /*
 156          * Iterate over each interface and perform the
 157          * requested configurations.
 158          */
 159         ieee80211_iterate_active_interfaces(rt2x00dev->hw,
 160                                             IEEE80211_IFACE_ITER_RESUME_ALL,
 161                                             rt2x00lib_intf_scheduled_iter,
 162                                             rt2x00dev);
 163 }
 164
 165 static void rt2x00lib_autowakeup(struct work_struct *work)
 166 {
 167         struct rt2x00_dev *rt2x00dev =
 168             container_of(work, struct rt2x00_dev, autowakeup_work.work);
 169
 170         if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 171                 return;
 172
 173         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 174                 rt2x00_err(rt2x00dev, "Device failed to wakeup\n");
 175         clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
 176 }
 177
 178 /*
 179  * Interrupt context handlers.
 180  */
 181 static void rt2x00lib_bc_buffer_iter(void *data, u8 *mac,
 182                                      struct ieee80211_vif *vif)
 183 {
 184         struct rt2x00_dev *rt2x00dev = data;
 185         struct sk_buff *skb;
 186
 187         /*
 188          * Only AP mode interfaces do broad- and multicast buffering
 189          */
 190         if (vif->type != NL80211_IFTYPE_AP)
 191                 return;
 192
 193         /*
 194          * Send out buffered broad- and multicast frames
 195          */
 196         skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
 197         while (skb) {
 198                 rt2x00mac_tx(rt2x00dev->hw, NULL, skb);
 199                 skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
 200         }
 201 }
 202
 203 static void rt2x00lib_beaconupdate_iter(void *data, u8 *mac,
 204                                         struct ieee80211_vif *vif)
 205 {
 206         struct rt2x00_dev *rt2x00dev = data;
 207
 208         if (vif->type != NL80211_IFTYPE_AP &&
 209             vif->type != NL80211_IFTYPE_ADHOC &&
 210             vif->type != NL80211_IFTYPE_MESH_POINT &&
 211             vif->type != NL80211_IFTYPE_WDS)
 212                 return;
 213
 214         /*
 215          * Update the beacon without locking. This is safe on PCI devices
 216          * as they only update the beacon periodically here. This should
 217          * never be called for USB devices.
 218          */
 219         WARN_ON(rt2x00_is_usb(rt2x00dev));
 220         rt2x00queue_update_beacon_locked(rt2x00dev, vif);
 221 }
 222
 223 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
 224 {
 225         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 226                 return;
 227
 228         /* send buffered bc/mc frames out for every bssid */
 229         ieee80211_iterate_active_interfaces_atomic(
 230                 rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
 231                 rt2x00lib_bc_buffer_iter, rt2x00dev);
 232         /*
 233          * Devices with pre tbtt interrupt don't need to update the beacon
 234          * here as they will fetch the next beacon directly prior to
 235          * transmission.
 236          */
 237         if (test_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags))
 238                 return;
 239
 240         /* fetch next beacon */
 241         ieee80211_iterate_active_interfaces_atomic(
 242                 rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
 243                 rt2x00lib_beaconupdate_iter, rt2x00dev);
 244 }
 245 EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
 246
 247 void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev)
 248 {
 249         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 250                 return;
 251
 252         /* fetch next beacon */
 253         ieee80211_iterate_active_interfaces_atomic(
 254                 rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
 255                 rt2x00lib_beaconupdate_iter, rt2x00dev);
 256 }
 257 EXPORT_SYMBOL_GPL(rt2x00lib_pretbtt);
 258
 259 void rt2x00lib_dmastart(struct queue_entry *entry)
 260 {
 261         set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 262         rt2x00queue_index_inc(entry, Q_INDEX);
 263 }
 264 EXPORT_SYMBOL_GPL(rt2x00lib_dmastart);
 265
 266 void rt2x00lib_dmadone(struct queue_entry *entry)
 267 {
 268         set_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags);
 269         clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 270         rt2x00queue_index_inc(entry, Q_INDEX_DMA_DONE);
 271 }
 272 EXPORT_SYMBOL_GPL(rt2x00lib_dmadone);
 273
 274 static inline int rt2x00lib_txdone_bar_status(struct queue_entry *entry)
 275 {
 276         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 277         struct ieee80211_bar *bar = (void *) entry->skb->data;
 278         struct rt2x00_bar_list_entry *bar_entry;
 279         int ret;
 280
 281         if (likely(!ieee80211_is_back_req(bar->frame_control)))
 282                 return 0;
 283
 284         /*
 285          * Unlike all other frames, the status report for BARs does
 286          * not directly come from the hardware as it is incapable of
 287          * matching a BA to a previously send BAR. The hardware will
 288          * report all BARs as if they weren't acked at all.
 289          *
 290          * Instead the RX-path will scan for incoming BAs and set the
 291          * block_acked flag if it sees one that was likely caused by
 292          * a BAR from us.
 293          *
 294          * Remove remaining BARs here and return their status for
 295          * TX done processing.
 296          */
 297         ret = 0;
 298         rcu_read_lock();
 299         list_for_each_entry_rcu(bar_entry, &rt2x00dev->bar_list, list) {
 300                 if (bar_entry->entry != entry)
 301                         continue;
 302
 303                 spin_lock_bh(&rt2x00dev->bar_list_lock);
 304                 /* Return whether this BAR was blockacked or not */
 305                 ret = bar_entry->block_acked;
 306                 /* Remove the BAR from our checklist */
 307                 list_del_rcu(&bar_entry->list);
 308                 spin_unlock_bh(&rt2x00dev->bar_list_lock);
 309                 kfree_rcu(bar_entry, head);
 310
 311                 break;
 312         }
 313         rcu_read_unlock();
 314
 315         return ret;
 316 }
 317
 318 void rt2x00lib_txdone(struct queue_entry *entry,
 319                       struct txdone_entry_desc *txdesc)
 320 {
 321         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 322         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 323         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 324         unsigned int header_length, i;
 325         u8 rate_idx, rate_flags, retry_rates;
 326         u8 skbdesc_flags = skbdesc->flags;
 327         bool success;
 328
 329         /*
 330          * Unmap the skb.
 331          */
 332         rt2x00queue_unmap_skb(entry);
 333
 334         /*
 335          * Remove the extra tx headroom from the skb.
 336          */
 337         skb_pull(entry->skb, rt2x00dev->ops->extra_tx_headroom);
 338
 339         /*
 340          * Signal that the TX descriptor is no longer in the skb.
 341          */
 342         skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
 343
 344         /*
 345          * Determine the length of 802.11 header.
 346          */
 347         header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
 348
 349         /*
 350          * Remove L2 padding which was added during
 351          */
 352         if (test_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags))
 353                 rt2x00queue_remove_l2pad(entry->skb, header_length);
 354
 355         /*
 356          * If the IV/EIV data was stripped from the frame before it was
 357          * passed to the hardware, we should now reinsert it again because
 358          * mac80211 will expect the same data to be present it the
 359          * frame as it was passed to us.
 360          */
 361         if (test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags))
 362                 rt2x00crypto_tx_insert_iv(entry->skb, header_length);
 363
 364         /*
 365          * Send frame to debugfs immediately, after this call is completed
 366          * we are going to overwrite the skb->cb array.
 367          */
 368         rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb);
 369
 370         /*
 371          * Determine if the frame has been successfully transmitted and
 372          * remove BARs from our check list while checking for their
 373          * TX status.
 374          */
 375         success =
 376             rt2x00lib_txdone_bar_status(entry) ||
 377             test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
 378             test_bit(TXDONE_UNKNOWN, &txdesc->flags);
 379
 380         /*
 381          * Update TX statistics.
 382          */
 383         rt2x00dev->link.qual.tx_success += success;
 384         rt2x00dev->link.qual.tx_failed += !success;
 385
 386         rate_idx = skbdesc->tx_rate_idx;
 387         rate_flags = skbdesc->tx_rate_flags;
 388         retry_rates = test_bit(TXDONE_FALLBACK, &txdesc->flags) ?
 389             (txdesc->retry + 1) : 1;
 390
 391         /*
 392          * Initialize TX status
 393          */
 394         memset(&tx_info->status, 0, sizeof(tx_info->status));
 395         tx_info->status.ack_signal = 0;
 396
 397         /*
 398          * Frame was send with retries, hardware tried
 399          * different rates to send out the frame, at each
 400          * retry it lowered the rate 1 step except when the
 401          * lowest rate was used.
 402          */
 403         for (i = 0; i < retry_rates && i < IEEE80211_TX_MAX_RATES; i++) {
 404                 tx_info->status.rates[i].idx = rate_idx - i;
 405                 tx_info->status.rates[i].flags = rate_flags;
 406
 407                 if (rate_idx - i == 0) {
 408                         /*
 409                          * The lowest rate (index 0) was used until the
 410                          * number of max retries was reached.
 411                          */
 412                         tx_info->status.rates[i].count = retry_rates - i;
 413                         i++;
 414                         break;
 415                 }
 416                 tx_info->status.rates[i].count = 1;
 417         }
 418         if (i < (IEEE80211_TX_MAX_RATES - 1))
 419                 tx_info->status.rates[i].idx = -1; /* terminate */
 420
 421         if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
 422                 if (success)
 423                         tx_info->flags |= IEEE80211_TX_STAT_ACK;
 424                 else
 425                         rt2x00dev->low_level_stats.dot11ACKFailureCount++;
 426         }
 427
 428         /*
 429          * Every single frame has it's own tx status, hence report
 430          * every frame as ampdu of size 1.
 431          *
 432          * TODO: if we can find out how many frames were aggregated
 433          * by the hw we could provide the real ampdu_len to mac80211
 434          * which would allow the rc algorithm to better decide on
 435          * which rates are suitable.
 436          */
 437         if (test_bit(TXDONE_AMPDU, &txdesc->flags) ||
 438             tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
 439                 tx_info->flags |= IEEE80211_TX_STAT_AMPDU;
 440                 tx_info->status.ampdu_len = 1;
 441                 tx_info->status.ampdu_ack_len = success ? 1 : 0;
 442
 443                 if (!success)
 444                         tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
 445         }
 446
 447         if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
 448                 if (success)
 449                         rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
 450                 else
 451                         rt2x00dev->low_level_stats.dot11RTSFailureCount++;
 452         }
 453
 454         /*
 455          * Only send the status report to mac80211 when it's a frame
 456          * that originated in mac80211. If this was a extra frame coming
 457          * through a mac80211 library call (RTS/CTS) then we should not
 458          * send the status report back.
 459          */
 460         if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) {
 461                 if (test_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags))
 462                         ieee80211_tx_status(rt2x00dev->hw, entry->skb);
 463                 else
 464                         ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
 465         } else
 466                 dev_kfree_skb_any(entry->skb);
 467
 468         /*
 469          * Make this entry available for reuse.
 470          */
 471         entry->skb = NULL;
 472         entry->flags = 0;
 473
 474         rt2x00dev->ops->lib->clear_entry(entry);
 475
 476         rt2x00queue_index_inc(entry, Q_INDEX_DONE);
 477
 478         /*
 479          * If the data queue was below the threshold before the txdone
 480          * handler we must make sure the packet queue in the mac80211 stack
 481          * is reenabled when the txdone handler has finished. This has to be
 482          * serialized with rt2x00mac_tx(), otherwise we can wake up queue
 483          * before it was stopped.
 484          */
 485         spin_lock_bh(&entry->queue->tx_lock);
 486         if (!rt2x00queue_threshold(entry->queue))
 487                 rt2x00queue_unpause_queue(entry->queue);
 488         spin_unlock_bh(&entry->queue->tx_lock);
 489 }
 490 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
 491
 492 void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status)
 493 {
 494         struct txdone_entry_desc txdesc;
 495
 496         txdesc.flags = 0;
 497         __set_bit(status, &txdesc.flags);
 498         txdesc.retry = 0;
 499
 500         rt2x00lib_txdone(entry, &txdesc);
 501 }
 502 EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo);
 503
 504 static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie)
 505 {
 506         struct ieee80211_mgmt *mgmt = (void *)data;
 507         u8 *pos, *end;
 508
 509         pos = (u8 *)mgmt->u.beacon.variable;
 510         end = data + len;
 511         while (pos < end) {
 512                 if (pos + 2 + pos[1] > end)
 513                         return NULL;
 514
 515                 if (pos[0] == ie)
 516                         return pos;
 517
 518                 pos += 2 + pos[1];
 519         }
 520
 521         return NULL;
 522 }
 523
 524 static void rt2x00lib_sleep(struct work_struct *work)
 525 {
 526         struct rt2x00_dev *rt2x00dev =
 527             container_of(work, struct rt2x00_dev, sleep_work);
 528
 529         if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 530                 return;
 531
 532         /*
 533          * Check again is powersaving is enabled, to prevent races from delayed
 534          * work execution.
 535          */
 536         if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
 537                 rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
 538                                  IEEE80211_CONF_CHANGE_PS);
 539 }
 540
 541 static void rt2x00lib_rxdone_check_ba(struct rt2x00_dev *rt2x00dev,
 542                                       struct sk_buff *skb,
 543                                       struct rxdone_entry_desc *rxdesc)
 544 {
 545         struct rt2x00_bar_list_entry *entry;
 546         struct ieee80211_bar *ba = (void *)skb->data;
 547
 548         if (likely(!ieee80211_is_back(ba->frame_control)))
 549                 return;
 550
 551         if (rxdesc->size < sizeof(*ba) + FCS_LEN)
 552                 return;
 553
 554         rcu_read_lock();
 555         list_for_each_entry_rcu(entry, &rt2x00dev->bar_list, list) {
 556
 557                 if (ba->start_seq_num != entry->start_seq_num)
 558                         continue;
 559
 560 #define TID_CHECK(a, b) (                                               \
 561         ((a) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)) ==        \
 562         ((b) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)))          \
 563
 564                 if (!TID_CHECK(ba->control, entry->control))
 565                         continue;
 566
 567 #undef TID_CHECK
 568
 569                 if (compare_ether_addr(ba->ra, entry->ta))
 570                         continue;
 571
 572                 if (compare_ether_addr(ba->ta, entry->ra))
 573                         continue;
 574
 575                 /* Mark BAR since we received the according BA */
 576                 spin_lock_bh(&rt2x00dev->bar_list_lock);
 577                 entry->block_acked = 1;
 578                 spin_unlock_bh(&rt2x00dev->bar_list_lock);
 579                 break;
 580         }
 581         rcu_read_unlock();
 582
 583 }
 584
 585 static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
 586                                       struct sk_buff *skb,
 587                                       struct rxdone_entry_desc *rxdesc)
 588 {
 589         struct ieee80211_hdr *hdr = (void *) skb->data;
 590         struct ieee80211_tim_ie *tim_ie;
 591         u8 *tim;
 592         u8 tim_len;
 593         bool cam;
 594
 595         /* If this is not a beacon, or if mac80211 has no powersaving
 596          * configured, or if the device is already in powersaving mode
 597          * we can exit now. */
 598         if (likely(!ieee80211_is_beacon(hdr->frame_control) ||
 599                    !(rt2x00dev->hw->conf.flags & IEEE80211_CONF_PS)))
 600                 return;
 601
 602         /* min. beacon length + FCS_LEN */
 603         if (skb->len <= 40 + FCS_LEN)
 604                 return;
 605
 606         /* and only beacons from the associated BSSID, please */
 607         if (!(rxdesc->dev_flags & RXDONE_MY_BSS) ||
 608             !rt2x00dev->aid)
 609                 return;
 610
 611         rt2x00dev->last_beacon = jiffies;
 612
 613         tim = rt2x00lib_find_ie(skb->data, skb->len - FCS_LEN, WLAN_EID_TIM);
 614         if (!tim)
 615                 return;
 616
 617         if (tim[1] < sizeof(*tim_ie))
 618                 return;
 619
 620         tim_len = tim[1];
 621         tim_ie = (struct ieee80211_tim_ie *) &tim[2];
 622
 623         /* Check whenever the PHY can be turned off again. */
 624
 625         /* 1. What about buffered unicast traffic for our AID? */
 626         cam = ieee80211_check_tim(tim_ie, tim_len, rt2x00dev->aid);
 627
 628         /* 2. Maybe the AP wants to send multicast/broadcast data? */
 629         cam |= (tim_ie->bitmap_ctrl & 0x01);
 630
 631         if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
 632                 queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work);
 633 }
 634
 635 static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
 636                                         struct rxdone_entry_desc *rxdesc)
 637 {
 638         struct ieee80211_supported_band *sband;
 639         const struct rt2x00_rate *rate;
 640         unsigned int i;
 641         int signal = rxdesc->signal;
 642         int type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
 643
 644         switch (rxdesc->rate_mode) {
 645         case RATE_MODE_CCK:
 646         case RATE_MODE_OFDM:
 647                 /*
 648                  * For non-HT rates the MCS value needs to contain the
 649                  * actually used rate modulation (CCK or OFDM).
 650                  */
 651                 if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
 652                         signal = RATE_MCS(rxdesc->rate_mode, signal);
 653
 654                 sband = &rt2x00dev->bands[rt2x00dev->curr_band];
 655                 for (i = 0; i < sband->n_bitrates; i++) {
 656                         rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
 657                         if (((type == RXDONE_SIGNAL_PLCP) &&
 658                              (rate->plcp == signal)) ||
 659                             ((type == RXDONE_SIGNAL_BITRATE) &&
 660                               (rate->bitrate == signal)) ||
 661                             ((type == RXDONE_SIGNAL_MCS) &&
 662                               (rate->mcs == signal))) {
 663                                 return i;
 664                         }
 665                 }
 666                 break;
 667         case RATE_MODE_HT_MIX:
 668         case RATE_MODE_HT_GREENFIELD:
 669                 if (signal >= 0 && signal <= 76)
 670                         return signal;
 671                 break;
 672         default:
 673                 break;
 674         }
 675
 676         rt2x00_warn(rt2x00dev, "Frame received with unrecognized signal, mode=0x%.4x, signal=0x%.4x, type=%d\n",
 677                     rxdesc->rate_mode, signal, type);
 678         return 0;
 679 }
 680
 681 void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp)
 682 {
 683         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 684         struct rxdone_entry_desc rxdesc;
 685         struct sk_buff *skb;
 686         struct ieee80211_rx_status *rx_status;
 687         unsigned int header_length;
 688         int rate_idx;
 689
 690         if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
 691             !test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 692                 goto submit_entry;
 693
 694         if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
 695                 goto submit_entry;
 696
 697         /*
 698          * Allocate a new sk_buffer. If no new buffer available, drop the
 699          * received frame and reuse the existing buffer.
 700          */
 701         skb = rt2x00queue_alloc_rxskb(entry, gfp);
 702         if (!skb)
 703                 goto submit_entry;
 704
 705         /*
 706          * Unmap the skb.
 707          */
 708         rt2x00queue_unmap_skb(entry);
 709
 710         /*
 711          * Extract the RXD details.
 712          */
 713         memset(&rxdesc, 0, sizeof(rxdesc));
 714         rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
 715
 716         /*
 717          * Check for valid size in case we get corrupted descriptor from
 718          * hardware.
 719          */
 720         if (unlikely(rxdesc.size == 0 ||
 721                      rxdesc.size > entry->queue->data_size)) {
 722                 rt2x00_err(rt2x00dev, "Wrong frame size %d max %d\n",
 723                            rxdesc.size, entry->queue->data_size);
 724                 dev_kfree_skb(entry->skb);
 725                 goto renew_skb;
 726         }
 727
 728         /*
 729          * The data behind the ieee80211 header must be
 730          * aligned on a 4 byte boundary.
 731          */
 732         header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
 733
 734         /*
 735          * Hardware might have stripped the IV/EIV/ICV data,
 736          * in that case it is possible that the data was
 737          * provided separately (through hardware descriptor)
 738          * in which case we should reinsert the data into the frame.
 739          */
 740         if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
 741             (rxdesc.flags & RX_FLAG_IV_STRIPPED))
 742                 rt2x00crypto_rx_insert_iv(entry->skb, header_length,
 743                                           &rxdesc);
 744         else if (header_length &&
 745                  (rxdesc.size > header_length) &&
 746                  (rxdesc.dev_flags & RXDONE_L2PAD))
 747                 rt2x00queue_remove_l2pad(entry->skb, header_length);
 748
 749         /* Trim buffer to correct size */
 750         skb_trim(entry->skb, rxdesc.size);
 751
 752         /*
 753          * Translate the signal to the correct bitrate index.
 754          */
 755         rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
 756         if (rxdesc.rate_mode == RATE_MODE_HT_MIX ||
 757             rxdesc.rate_mode == RATE_MODE_HT_GREENFIELD)
 758                 rxdesc.flags |= RX_FLAG_HT;
 759
 760         /*
 761          * Check if this is a beacon, and more frames have been
 762          * buffered while we were in powersaving mode.
 763          */
 764         rt2x00lib_rxdone_check_ps(rt2x00dev, entry->skb, &rxdesc);
 765
 766         /*
 767          * Check for incoming BlockAcks to match to the BlockAckReqs
 768          * we've send out.
 769          */
 770         rt2x00lib_rxdone_check_ba(rt2x00dev, entry->skb, &rxdesc);
 771
 772         /*
 773          * Update extra components
 774          */
 775         rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
 776         rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
 777         rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
 778
 779         /*
 780          * Initialize RX status information, and send frame
 781          * to mac80211.
 782          */
 783         rx_status = IEEE80211_SKB_RXCB(entry->skb);
 784
 785         /* Ensure that all fields of rx_status are initialized
 786          * properly. The skb->cb array was used for driver
 787          * specific informations, so rx_status might contain
 788          * garbage.
 789          */
 790         memset(rx_status, 0, sizeof(*rx_status));
 791
 792         rx_status->mactime = rxdesc.timestamp;
 793         rx_status->band = rt2x00dev->curr_band;
 794         rx_status->freq = rt2x00dev->curr_freq;
 795         rx_status->rate_idx = rate_idx;
 796         rx_status->signal = rxdesc.rssi;
 797         rx_status->flag = rxdesc.flags;
 798         rx_status->antenna = rt2x00dev->link.ant.active.rx;
 799
 800         ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
 801
 802 renew_skb:
 803         /*
 804          * Replace the skb with the freshly allocated one.
 805          */
 806         entry->skb = skb;
 807
 808 submit_entry:
 809         entry->flags = 0;
 810         rt2x00queue_index_inc(entry, Q_INDEX_DONE);
 811         if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
 812             test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 813                 rt2x00dev->ops->lib->clear_entry(entry);
 814 }
 815 EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
 816
 817 /*
 818  * Driver initialization handlers.
 819  */
 820 const struct rt2x00_rate rt2x00_supported_rates[12] = {
 821         {
 822                 .flags = DEV_RATE_CCK,
 823                 .bitrate = 10,
 824                 .ratemask = BIT(0),
 825                 .plcp = 0x00,
 826                 .mcs = RATE_MCS(RATE_MODE_CCK, 0),
 827         },
 828         {
 829                 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 830                 .bitrate = 20,
 831                 .ratemask = BIT(1),
 832                 .plcp = 0x01,
 833                 .mcs = RATE_MCS(RATE_MODE_CCK, 1),
 834         },
 835         {
 836                 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 837                 .bitrate = 55,
 838                 .ratemask = BIT(2),
 839                 .plcp = 0x02,
 840                 .mcs = RATE_MCS(RATE_MODE_CCK, 2),
 841         },
 842         {
 843                 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 844                 .bitrate = 110,
 845                 .ratemask = BIT(3),
 846                 .plcp = 0x03,
 847                 .mcs = RATE_MCS(RATE_MODE_CCK, 3),
 848         },
 849         {
 850                 .flags = DEV_RATE_OFDM,
 851                 .bitrate = 60,
 852                 .ratemask = BIT(4),
 853                 .plcp = 0x0b,
 854                 .mcs = RATE_MCS(RATE_MODE_OFDM, 0),
 855         },
 856         {
 857                 .flags = DEV_RATE_OFDM,
 858                 .bitrate = 90,
 859                 .ratemask = BIT(5),
 860                 .plcp = 0x0f,
 861                 .mcs = RATE_MCS(RATE_MODE_OFDM, 1),
 862         },
 863         {
 864                 .flags = DEV_RATE_OFDM,
 865                 .bitrate = 120,
 866                 .ratemask = BIT(6),
 867                 .plcp = 0x0a,
 868                 .mcs = RATE_MCS(RATE_MODE_OFDM, 2),
 869         },
 870         {
 871                 .flags = DEV_RATE_OFDM,
 872                 .bitrate = 180,
 873                 .ratemask = BIT(7),
 874                 .plcp = 0x0e,
 875                 .mcs = RATE_MCS(RATE_MODE_OFDM, 3),
 876         },
 877         {
 878                 .flags = DEV_RATE_OFDM,
 879                 .bitrate = 240,
 880                 .ratemask = BIT(8),
 881                 .plcp = 0x09,
 882                 .mcs = RATE_MCS(RATE_MODE_OFDM, 4),
 883         },
 884         {
 885                 .flags = DEV_RATE_OFDM,
 886                 .bitrate = 360,
 887                 .ratemask = BIT(9),
 888                 .plcp = 0x0d,
 889                 .mcs = RATE_MCS(RATE_MODE_OFDM, 5),
 890         },
 891         {
 892                 .flags = DEV_RATE_OFDM,
 893                 .bitrate = 480,
 894                 .ratemask = BIT(10),
 895                 .plcp = 0x08,
 896                 .mcs = RATE_MCS(RATE_MODE_OFDM, 6),
 897         },
 898         {
 899                 .flags = DEV_RATE_OFDM,
 900                 .bitrate = 540,
 901                 .ratemask = BIT(11),
 902                 .plcp = 0x0c,
 903                 .mcs = RATE_MCS(RATE_MODE_OFDM, 7),
 904         },
 905 };
 906
 907 static void rt2x00lib_channel(struct ieee80211_channel *entry,
 908                               const int channel, const int tx_power,
 909                               const int value)
 910 {
 911         /* XXX: this assumption about the band is wrong for 802.11j */
 912         entry->band = channel <= 14 ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
 913         entry->center_freq = ieee80211_channel_to_frequency(channel,
 914                                                             entry->band);
 915         entry->hw_value = value;
 916         entry->max_power = tx_power;
 917         entry->max_antenna_gain = 0xff;
 918 }
 919
 920 static void rt2x00lib_rate(struct ieee80211_rate *entry,
 921                            const u16 index, const struct rt2x00_rate *rate)
 922 {
 923         entry->flags = 0;
 924         entry->bitrate = rate->bitrate;
 925         entry->hw_value = index;
 926         entry->hw_value_short = index;
 927
 928         if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
 929                 entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
 930 }
 931
 932 static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
 933                                     struct hw_mode_spec *spec)
 934 {
 935         struct ieee80211_hw *hw = rt2x00dev->hw;
 936         struct ieee80211_channel *channels;
 937         struct ieee80211_rate *rates;
 938         unsigned int num_rates;
 939         unsigned int i;
 940
 941         num_rates = 0;
 942         if (spec->supported_rates & SUPPORT_RATE_CCK)
 943                 num_rates += 4;
 944         if (spec->supported_rates & SUPPORT_RATE_OFDM)
 945                 num_rates += 8;
 946
 947         channels = kcalloc(spec->num_channels, sizeof(*channels), GFP_KERNEL);
 948         if (!channels)
 949                 return -ENOMEM;
 950
 951         rates = kcalloc(num_rates, sizeof(*rates), GFP_KERNEL);
 952         if (!rates)
 953                 goto exit_free_channels;
 954
 955         /*
 956          * Initialize Rate list.
 957          */
 958         for (i = 0; i < num_rates; i++)
 959                 rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i));
 960
 961         /*
 962          * Initialize Channel list.
 963          */
 964         for (i = 0; i < spec->num_channels; i++) {
 965                 rt2x00lib_channel(&channels[i],
 966                                   spec->channels[i].channel,
 967                                   spec->channels_info[i].max_power, i);
 968         }
 969
 970         /*
 971          * Intitialize 802.11b, 802.11g
 972          * Rates: CCK, OFDM.
 973          * Channels: 2.4 GHz
 974          */
 975         if (spec->supported_bands & SUPPORT_BAND_2GHZ) {
 976                 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14;
 977                 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates;
 978                 rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels;
 979                 rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
 980                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 981                     &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
 982                 memcpy(&rt2x00dev->bands[IEEE80211_BAND_2GHZ].ht_cap,
 983                        &spec->ht, sizeof(spec->ht));
 984         }
 985
 986         /*
 987          * Intitialize 802.11a
 988          * Rates: OFDM.
 989          * Channels: OFDM, UNII, HiperLAN2.
 990          */
 991         if (spec->supported_bands & SUPPORT_BAND_5GHZ) {
 992                 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels =
 993                     spec->num_channels - 14;
 994                 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates =
 995                     num_rates - 4;
 996                 rt2x00dev->bands[IEEE80211_BAND_5GHZ].channels = &channels[14];
 997                 rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
 998                 hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
 999                     &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
1000                 memcpy(&rt2x00dev->bands[IEEE80211_BAND_5GHZ].ht_cap,
1001                        &spec->ht, sizeof(spec->ht));
1002         }
1003
1004         return 0;
1005
1006  exit_free_channels:
1007         kfree(channels);
1008         rt2x00_err(rt2x00dev, "Allocation ieee80211 modes failed\n");
1009         return -ENOMEM;
1010 }
1011
1012 static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
1013 {
1014         if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
1015                 ieee80211_unregister_hw(rt2x00dev->hw);
1016
1017         if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) {
1018                 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
1019                 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->bitrates);
1020                 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
1021                 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
1022         }
1023
1024         kfree(rt2x00dev->spec.channels_info);
1025 }
1026
1027 static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
1028 {
1029         struct hw_mode_spec *spec = &rt2x00dev->spec;
1030         int status;
1031
1032         if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
1033                 return 0;
1034
1035         /*
1036          * Initialize HW modes.
1037          */
1038         status = rt2x00lib_probe_hw_modes(rt2x00dev, spec);
1039         if (status)
1040                 return status;
1041
1042         /*
1043          * Initialize HW fields.
1044          */
1045         rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues;
1046
1047         /*
1048          * Initialize extra TX headroom required.
1049          */
1050         rt2x00dev->hw->extra_tx_headroom =
1051                 max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
1052                       rt2x00dev->ops->extra_tx_headroom);
1053
1054         /*
1055          * Take TX headroom required for alignment into account.
1056          */
1057         if (test_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags))
1058                 rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
1059         else if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags))
1060                 rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
1061
1062         /*
1063          * Tell mac80211 about the size of our private STA structure.
1064          */
1065         rt2x00dev->hw->sta_data_size = sizeof(struct rt2x00_sta);
1066
1067         /*
1068          * Allocate tx status FIFO for driver use.
1069          */
1070         if (test_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags)) {
1071                 /*
1072                  * Allocate the txstatus fifo. In the worst case the tx
1073                  * status fifo has to hold the tx status of all entries
1074                  * in all tx queues. Hence, calculate the kfifo size as
1075                  * tx_queues * entry_num and round up to the nearest
1076                  * power of 2.
1077                  */
1078                 int kfifo_size =
1079                         roundup_pow_of_two(rt2x00dev->ops->tx_queues *
1080                                            rt2x00dev->tx->limit *
1081                                            sizeof(u32));
1082
1083                 status = kfifo_alloc(&rt2x00dev->txstatus_fifo, kfifo_size,
1084                                      GFP_KERNEL);
1085                 if (status)
1086                         return status;
1087         }
1088
1089         /*
1090          * Initialize tasklets if used by the driver. Tasklets are
1091          * disabled until the interrupts are turned on. The driver
1092          * has to handle that.
1093          */
1094 #define RT2X00_TASKLET_INIT(taskletname) \
1095         if (rt2x00dev->ops->lib->taskletname) { \
1096                 tasklet_init(&rt2x00dev->taskletname, \
1097                              rt2x00dev->ops->lib->taskletname, \
1098                              (unsigned long)rt2x00dev); \
1099         }
1100
1101         RT2X00_TASKLET_INIT(txstatus_tasklet);
1102         RT2X00_TASKLET_INIT(pretbtt_tasklet);
1103         RT2X00_TASKLET_INIT(tbtt_tasklet);
1104         RT2X00_TASKLET_INIT(rxdone_tasklet);
1105         RT2X00_TASKLET_INIT(autowake_tasklet);
1106
1107 #undef RT2X00_TASKLET_INIT
1108
1109         /*
1110          * Register HW.
1111          */
1112         status = ieee80211_register_hw(rt2x00dev->hw);
1113         if (status)
1114                 return status;
1115
1116         set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
1117
1118         return 0;
1119 }
1120
1121 /*
1122  * Initialization/uninitialization handlers.
1123  */
1124 static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
1125 {
1126         if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
1127                 return;
1128
1129         /*
1130          * Unregister extra components.
1131          */
1132         rt2x00rfkill_unregister(rt2x00dev);
1133
1134         /*
1135          * Allow the HW to uninitialize.
1136          */
1137         rt2x00dev->ops->lib->uninitialize(rt2x00dev);
1138
1139         /*
1140          * Free allocated queue entries.
1141          */
1142         rt2x00queue_uninitialize(rt2x00dev);
1143 }
1144
1145 static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
1146 {
1147         int status;
1148
1149         if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
1150                 return 0;
1151
1152         /*
1153          * Allocate all queue entries.
1154          */
1155         status = rt2x00queue_initialize(rt2x00dev);
1156         if (status)
1157                 return status;
1158
1159         /*
1160          * Initialize the device.
1161          */
1162         status = rt2x00dev->ops->lib->initialize(rt2x00dev);
1163         if (status) {
1164                 rt2x00queue_uninitialize(rt2x00dev);
1165                 return status;
1166         }
1167
1168         set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
1169
1170         return 0;
1171 }
1172
1173 int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
1174 {
1175         int retval;
1176
1177         if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
1178                 return 0;
1179
1180         /*
1181          * If this is the first interface which is added,
1182          * we should load the firmware now.
1183          */
1184         retval = rt2x00lib_load_firmware(rt2x00dev);
1185         if (retval)
1186                 return retval;
1187
1188         /*
1189          * Initialize the device.
1190          */
1191         retval = rt2x00lib_initialize(rt2x00dev);
1192         if (retval)
1193                 return retval;
1194
1195         rt2x00dev->intf_ap_count = 0;
1196         rt2x00dev->intf_sta_count = 0;
1197         rt2x00dev->intf_associated = 0;
1198
1199         /* Enable the radio */
1200         retval = rt2x00lib_enable_radio(rt2x00dev);
1201         if (retval)
1202                 return retval;
1203
1204         set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
1205
1206         return 0;
1207 }
1208
1209 void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
1210 {
1211         if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
1212                 return;
1213
1214         /*
1215          * Perhaps we can add something smarter here,
1216          * but for now just disabling the radio should do.
1217          */
1218         rt2x00lib_disable_radio(rt2x00dev);
1219
1220         rt2x00dev->intf_ap_count = 0;
1221         rt2x00dev->intf_sta_count = 0;
1222         rt2x00dev->intf_associated = 0;
1223 }
1224
1225 static inline void rt2x00lib_set_if_combinations(struct rt2x00_dev *rt2x00dev)
1226 {
1227         struct ieee80211_iface_limit *if_limit;
1228         struct ieee80211_iface_combination *if_combination;
1229
1230         if (rt2x00dev->ops->max_ap_intf < 2)
1231                 return;
1232
1233         /*
1234          * Build up AP interface limits structure.
1235          */
1236         if_limit = &rt2x00dev->if_limits_ap;
1237         if_limit->max = rt2x00dev->ops->max_ap_intf;
1238         if_limit->types = BIT(NL80211_IFTYPE_AP);
1239 #ifdef CONFIG_MAC80211_MESH
1240         if_limit->types |= BIT(NL80211_IFTYPE_MESH_POINT);
1241 #endif
1242
1243         /*
1244          * Build up AP interface combinations structure.
1245          */
1246         if_combination = &rt2x00dev->if_combinations[IF_COMB_AP];
1247         if_combination->limits = if_limit;
1248         if_combination->n_limits = 1;
1249         if_combination->max_interfaces = if_limit->max;
1250         if_combination->num_different_channels = 1;
1251
1252         /*
1253          * Finally, specify the possible combinations to mac80211.
1254          */
1255         rt2x00dev->hw->wiphy->iface_combinations = rt2x00dev->if_combinations;
1256         rt2x00dev->hw->wiphy->n_iface_combinations = 1;
1257 }
1258
1259 /*
1260  * driver allocation handlers.
1261  */
1262 int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
1263 {
1264         int retval = -ENOMEM;
1265
1266         /*
1267          * Set possible interface combinations.
1268          */
1269         rt2x00lib_set_if_combinations(rt2x00dev);
1270
1271         /*
1272          * Allocate the driver data memory, if necessary.
1273          */
1274         if (rt2x00dev->ops->drv_data_size > 0) {
1275                 rt2x00dev->drv_data = kzalloc(rt2x00dev->ops->drv_data_size,
1276                                               GFP_KERNEL);
1277                 if (!rt2x00dev->drv_data) {
1278                         retval = -ENOMEM;
1279                         goto exit;
1280                 }
1281         }
1282
1283         spin_lock_init(&rt2x00dev->irqmask_lock);
1284         mutex_init(&rt2x00dev->csr_mutex);
1285         INIT_LIST_HEAD(&rt2x00dev->bar_list);
1286         spin_lock_init(&rt2x00dev->bar_list_lock);
1287
1288         set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
1289
1290         /*
1291          * Make room for rt2x00_intf inside the per-interface
1292          * structure ieee80211_vif.
1293          */
1294         rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
1295
1296         /*
1297          * rt2x00 devices can only use the last n bits of the MAC address
1298          * for virtual interfaces.
1299          */
1300         rt2x00dev->hw->wiphy->addr_mask[ETH_ALEN - 1] =
1301                 (rt2x00dev->ops->max_ap_intf - 1);
1302
1303         /*
1304          * Initialize work.
1305          */
1306         rt2x00dev->workqueue =
1307             alloc_ordered_workqueue(wiphy_name(rt2x00dev->hw->wiphy), 0);
1308         if (!rt2x00dev->workqueue) {
1309                 retval = -ENOMEM;
1310                 goto exit;
1311         }
1312
1313         INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
1314         INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
1315         INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
1316
1317         /*
1318          * Let the driver probe the device to detect the capabilities.
1319          */
1320         retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
1321         if (retval) {
1322                 rt2x00_err(rt2x00dev, "Failed to allocate device\n");
1323                 goto exit;
1324         }
1325
1326         /*
1327          * Allocate queue array.
1328          */
1329         retval = rt2x00queue_allocate(rt2x00dev);
1330         if (retval)
1331                 goto exit;
1332
1333         /*
1334          * Determine which operating modes are supported, all modes
1335          * which require beaconing, depend on the availability of
1336          * beacon entries.
1337          */
1338         rt2x00dev->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
1339         if (rt2x00dev->ops->bcn->entry_num > 0)
1340                 rt2x00dev->hw->wiphy->interface_modes |=
1341                     BIT(NL80211_IFTYPE_ADHOC) |
1342                     BIT(NL80211_IFTYPE_AP) |
1343 #ifdef CONFIG_MAC80211_MESH
1344                     BIT(NL80211_IFTYPE_MESH_POINT) |
1345 #endif
1346                     BIT(NL80211_IFTYPE_WDS);
1347
1348         rt2x00dev->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
1349
1350         /*
1351          * Initialize ieee80211 structure.
1352          */
1353         retval = rt2x00lib_probe_hw(rt2x00dev);
1354         if (retval) {
1355                 rt2x00_err(rt2x00dev, "Failed to initialize hw\n");
1356                 goto exit;
1357         }
1358
1359         /*
1360          * Register extra components.
1361          */
1362         rt2x00link_register(rt2x00dev);
1363         rt2x00leds_register(rt2x00dev);
1364         rt2x00debug_register(rt2x00dev);
1365         rt2x00rfkill_register(rt2x00dev);
1366
1367         return 0;
1368
1369 exit:
1370         rt2x00lib_remove_dev(rt2x00dev);
1371
1372         return retval;
1373 }
1374 EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
1375
1376 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
1377 {
1378         clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
1379
1380         /*
1381          * Disable radio.
1382          */
1383         rt2x00lib_disable_radio(rt2x00dev);
1384
1385         /*
1386          * Stop all work.
1387          */
1388         cancel_work_sync(&rt2x00dev->intf_work);
1389         cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
1390         cancel_work_sync(&rt2x00dev->sleep_work);
1391         if (rt2x00_is_usb(rt2x00dev)) {
1392                 hrtimer_cancel(&rt2x00dev->txstatus_timer);
1393                 cancel_work_sync(&rt2x00dev->rxdone_work);
1394                 cancel_work_sync(&rt2x00dev->txdone_work);
1395         }
1396         if (rt2x00dev->workqueue)
1397                 destroy_workqueue(rt2x00dev->workqueue);
1398
1399         /*
1400          * Free the tx status fifo.
1401          */
1402         kfifo_free(&rt2x00dev->txstatus_fifo);
1403
1404         /*
1405          * Kill the tx status tasklet.
1406          */
1407         tasklet_kill(&rt2x00dev->txstatus_tasklet);
1408         tasklet_kill(&rt2x00dev->pretbtt_tasklet);
1409         tasklet_kill(&rt2x00dev->tbtt_tasklet);
1410         tasklet_kill(&rt2x00dev->rxdone_tasklet);
1411         tasklet_kill(&rt2x00dev->autowake_tasklet);
1412
1413         /*
1414          * Uninitialize device.
1415          */
1416         rt2x00lib_uninitialize(rt2x00dev);
1417
1418         /*
1419          * Free extra components
1420          */
1421         rt2x00debug_deregister(rt2x00dev);
1422         rt2x00leds_unregister(rt2x00dev);
1423
1424         /*
1425          * Free ieee80211_hw memory.
1426          */
1427         rt2x00lib_remove_hw(rt2x00dev);
1428
1429         /*
1430          * Free firmware image.
1431          */
1432         rt2x00lib_free_firmware(rt2x00dev);
1433
1434         /*
1435          * Free queue structures.
1436          */
1437         rt2x00queue_free(rt2x00dev);
1438
1439         /*
1440          * Free the driver data.
1441          */
1442         if (rt2x00dev->drv_data)
1443                 kfree(rt2x00dev->drv_data);
1444 }
1445 EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
1446
1447 /*
1448  * Device state handlers
1449  */
1450 #ifdef CONFIG_PM
1451 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
1452 {
1453         rt2x00_dbg(rt2x00dev, "Going to sleep\n");
1454
1455         /*
1456          * Prevent mac80211 from accessing driver while suspended.
1457          */
1458         if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
1459                 return 0;
1460
1461         /*
1462          * Cleanup as much as possible.
1463          */
1464         rt2x00lib_uninitialize(rt2x00dev);
1465
1466         /*
1467          * Suspend/disable extra components.
1468          */
1469         rt2x00leds_suspend(rt2x00dev);
1470         rt2x00debug_deregister(rt2x00dev);
1471
1472         /*
1473          * Set device mode to sleep for power management,
1474          * on some hardware this call seems to consistently fail.
1475          * From the specifications it is hard to tell why it fails,
1476          * and if this is a "bad thing".
1477          * Overall it is safe to just ignore the failure and
1478          * continue suspending. The only downside is that the
1479          * device will not be in optimal power save mode, but with
1480          * the radio and the other components already disabled the
1481          * device is as good as disabled.
1482          */
1483         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP))
1484                 rt2x00_warn(rt2x00dev, "Device failed to enter sleep state, continue suspending\n");
1485
1486         return 0;
1487 }
1488 EXPORT_SYMBOL_GPL(rt2x00lib_suspend);
1489
1490 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
1491 {
1492         rt2x00_dbg(rt2x00dev, "Waking up\n");
1493
1494         /*
1495          * Restore/enable extra components.
1496          */
1497         rt2x00debug_register(rt2x00dev);
1498         rt2x00leds_resume(rt2x00dev);
1499
1500         /*
1501          * We are ready again to receive requests from mac80211.
1502          */
1503         set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
1504
1505         return 0;
1506 }
1507 EXPORT_SYMBOL_GPL(rt2x00lib_resume);
1508 #endif /* CONFIG_PM */
1509
1510 /*
1511  * rt2x00lib module information.
1512  */
1513 MODULE_AUTHOR(DRV_PROJECT);
1514 MODULE_VERSION(DRV_VERSION);
1515 MODULE_DESCRIPTION("rt2x00 library");
1516 MODULE_LICENSE("GPL");